Quick Connect Trigger NozzleFeatures: Multiple flow control settings Quick connect hose/trigger nozzle Can work with both fresh and saltwater Designed for use with washdown pumps

Read more less

Straight Adapter - 15A Male Straight Blade to 50A 125/250V Female LockingStraight Adapters are high-quality, one-piece adapters similar in usage to Pigtail Adapters. However, they do not have sealing collars and are not recommended for use in wet locations. Use only in an enclosed, dry location, such as powering your boat from a 15A power receptacle inside your house.Features: Includes power LED Marine-grade construction Not recommended for use in wet locations WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Straight Adapter Box Dimensions: 3"H x 4"W x 8"L WT: 0.6 lbs UPC: 093344060588

Read more less

3/8" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - GrayThis hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. Features:  Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone   Also, provides excellent rope-like bend-ability and fitting retention For both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%) EPA Certified and CARB Executive Order for low permeation Type B1-15 NMMA Type Accepted & CE certified Application: Marine Fuel Hose for distribution, return, vent and transfer For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Fluoroplastic Internal Barrier Cover: Gray CPE Rubber Reinforcement: 2-Spiral Polyester Plies  Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Length: 50’ (15m) Boxed Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.588 / (mm) 14.9 Burst Pressure: (psi) 175 / (mpa) 1.21 Working Pressure: (psi) 35 / (mpa) 0.24 Bend Radius: (inch) 4" / (mm) 101.6 Weight: (lb/100 ft.) 10.5 / (kg/m) 0.156 Permeation Rate (Standard is (15g/m^2/24hrs (CE10)): 5.0 *The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15 Specifications: ID Diameter (inches): 3/8" Length (Feet): 50' Box Dimensions: 3"H x 18"W x 18"L WT: 6.4 lbs UPC: 704917018065 Quick Guide (pdf)

Read more less

Turning Point Hub Kit: 25Features Lifetime Warranty Never buy another hub kit system again Inner splines adapt to the engine Outer hub compatible with different props Reduce gear shock & engine/drive damage Save up to 30% when purchasing a replacement prop Eliminate propeller vibration & chatter Eliminate hub cracking & failure Corrosion resistant materials - brass splines Reduce gear shock & engine/drive damageWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

Turning Point Hub Kit: 502Features Lifetime Warranty Never buy another hub kit system again Inner splines adapt to the engine Outer hub compatible with different props Reduce gear shock & engine/drive damage Save up to 30% when purchasing a replacement prop Eliminate propeller vibration & chatter Eliminate hub cracking & failure Corrosion resistant materials - brass splines Reduce gear shock & engine/drive damage Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value. Also adapts to all Michigan Wheel® and Mercury® interchangeable propellersWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

Handle Telescoping - 6-11' w/Boat HookEasily get to those hard-to-reach areas on your RV, boat, home, and more with Camco's adjustable-length multi-purpose handles. They feature an ergonomic teardrop design for comfortable use. Anodized aluminum construction resists rusting, and the TPE hand grip gives you a secure and comfortable grip. Patented.Features: Adjustable 6-11 ft. length Ergonomic tear-drop design Easily wash higher areas on your RV, boat, home, etc. Anodized aluminum construction TPE hand grip

Read more less

Marine Formula™ 10oz AerosolMarine Formula™ is a specially formulated patented mixture that cleans and removes adhesives and sealants on and inside the boat. Use Marine Formula™ to clean up and remove these common marine adhesives and sealants. Quick Guide (pdf)

Read more less

Engine Oil Temperature Sensor - 1/2"-14NPT Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - 1/2"-14NPT Calibration - 150°C Measurement Range - 150°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Water Temperature Sensor - M16x1.5 Thread - 120°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - M16x1.5 Calibration - 120°C Measurement Range - 120°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Engine Oil Temperature Sensor - M14x1.5 Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - M14x1.5 Calibration - 150°C Measurement Range - 150°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Weatherproof Cover With Lift Lid7420CRProduct Features: Fits 15A, 20A, & 30A single receptacles Yellow LEXAN® with lift lid WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 1"H x 3"W x 5"L WT: 0.2 lbs UPC: 093344008108 Quick Guide (pdf)

Read more less

LinkUp - Pyrometer KitThe system includes a Veratron LinkUp Gateway Module that enables the Pyrometer Sensor to be connected to and compatible with the NMEA 2000 network.  Its internal galvanic isolation decouples the backbone power from the LinkUp power supply, per NMEA requirement. Configuring a LinkUp gateway is simple using a mobile device and the companion Veratron app available from the App Store and Google Play.  Each module has a built-in passive wireless antenna. The parameters of the sensor are configured to type, instance and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.Alternatively, LinkUp devices can be configured via NMEA 2000 with the PC Configuration Tool. This method additionally allows for real-time reading of the analog signal. An LED on the device will illuminate, notifying the user that the LinkUp is being configured.*Includes sensor and Link Up Gateway.Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Input Signal - LIN bus Nominal Voltage - 12V *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Series: LinkUp Gauge Type: Pyrometer Gauge Size: N/A Voltage - Input Range (Volts): 12v Box Set: No Box Dimensions: 4"H x 4"W x 16"L WT: 1.4 lbs UPC: 7640178729506 Owner's Manual (pdf)Brochure (pdf)

Read more less

Series Multipurpose Marine Cleaner - SMC Concentrate - 1 GallonRemove tough stains without discoloring or harming the surface! This powerful cleaner contains no bleach and is safe on vinyl, non-skid, and graphics. Perfect for a pre-wax cleaning.SMC is a scientifically formulated multipurpose, multisurface cleaner.Surfaces: Fiberglass Vinyl Carpet Rubber Teak Acrylic Canvas Purposes: Black Streaks Vinyl Seating Exhaust Stains Bilges Carpet Stains Wheel & Rims Fish Blood and more... Eliminate the need to use numerous cleaners; SMC does it all!1 gallon SMC Concentrate mixes with 4 gallons of water to make 5 gallons! (1 part SMC to 4 parts water.)Serious Marine Cleaner Value: Save 86 percent per ounce when you purchase 1 gallon concentrate vs 32 ounces: 32 ounces = $0.37/oz 1 gallon concentrate (creates 5 gallons mixed) = $0.05/oz MADE IN USA

Read more less

Serious Shine Quick Detailer - 14ozCleans, polishes, and protects almost any surface in one step without greasy, artificial residue.The perfect one step detailer! Serious Shine cleans, polishes, and protects virtually any solid surface in one easy step, leaving no greasy, artificial residue. Also, contains UV inhibitors and anti-static properties, further protecting all types of surfaces. Serious Shine is the perfect quick detailer. CLEAN, POLISH & PROTECT In Car & Rv Vinyl Seating Dash Board Electronic Touch Screens Glass Clear Coat Wheels & Tires Around the Boat Hull Cockpit Cabin Eisenglass Vinyl Seating Fiberglass In the Home Mirrors Stainless Steel Appliances Shower Glass Doors Windows Solid Surface Countertops and much more... This unique formula provides high gloss and a UV protective coating that also repels water. Now featuring a integrated click close spray nozzle and a rust resistant can. MADE IN USA. Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 8"L WT: 1.05 lbs UPC: 703485120071

Read more less

Bucket CaddyFeatures: Convenient finger grips for easy removal Carries & stores cleaning supplies Drain holes keep supplies dry Specifications: Type: Tools & Accessories Box Dimensions: 6"H x 10"W x 10"L WT: 0.7 lbs UPC: 703485121108

Read more less

Deluxe Lambs Wool Wash MittGenuine lambs wool mitt for washing and polishing.The Deluxe Wash Mitt is made from genuine lambs wool. The shaped thumb and elastic band base make for a comfortable, easy, snug fit. It's great for washing and polishing and can be used wet or dry. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 8"W x 12"L WT: 0.3 lbs UPC: 703485002858

Read more less

Dual Action Polisher Scrubber PadCoarse (Brown) for stripping and paint prepTurn your Shurhold Polisher into an aggressive power scrubber. Great for working on all types of surfaces and projects.These pads are also great for teak work. Coarse brown pads are intended for heavy duty teak cleaning and bottom paint preparationAll pads are designed to easily fit Shurhold's Dual Action Polisher. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 5"W x 5"L WT: 0.05 lbs UPC: 703485120750

Read more less

Wire Dockside Receptacle50Amp 125/250V 3 Pole, 4-Wire Dockside Receptacle Black, glass filled nylon body and face provide excellent resistance in harsh environments Corrosion resistant, marine grade construction WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Receptacles Box Dimensions: 3"H x 4"W x 7"L WT: 0.55 lbs UPC: 093344007101 Quick Guide (pdf)Brochure (pdf)

Read more less

4" ID 90-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.Features: Four stainless steel clamps are included This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards) Black high-temp EDPM rubber Construction: Color: Black Reinforcement: Reinforcing ribs on 6” I.D. and above Temperature Range: up to 250°F (121°C) Specifications: Inner Diameter: (inch) 4” / (mm) 101.6 A: (inch) 5.75" / (mm) 146 B: (inch) 5.75” / (mm) 146 C: (inch) 1.75” / (mm) 44.4 D: (inch) 1.75” / (mm) 44.4 R: (inch) 2” / (mm) 50.8 W: (inch) 0.25” / (mm) 6.4 Elbow Degree: 90 degrees Specifications: ID Diameter (inches): 4" Box Dimensions: 7"H x 7"W x 8"L WT: 2.6 lbs UPC: 704917000411 Quick Guide (pdf)

Read more less

4" ID Blue Silicone Molded Wet Exhaust Hump with 4 T-Bolt ClampThis silicone and rubber hump hose provides the ultimate flexible connector for marine wet exhaust systems. The hump hose offers much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.Construction: Tube & Cover: VHT blue silicone Color: Blue Reinforcement: EPDM Silicone Rubber Temperature Range: 350°F (177°C) Specifications: Inner Diameter: (inch) 4" / (mm) 101.6 Outer Diameter: (inch) 4.5" / (mm) 114.3 Working Pressure: (Psi) 15 / (Bar) 1 *Burst Pressure is 4 x Working Pressure Specifications: ID Diameter (inches): 4" Box Dimensions: 7"H x 7"W x 7"L WT: 2 lbs UPC: 704917002491 Quick Guide (pdf)

Read more less

6" ID Blue Silicone Molded Wet Exhaust Hump with 4 T-Bolt ClampThis silicone and rubber hump hose provides the ultimate flexible connector for marine wet exhaust systems. The hump hose offers much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.Construction: Tube & Cover: VHT blue silicone Color: Blue Reinforcement: EPDM Silicone Rubber Temperature Range: 350°F (177°C) Specifications: Inner Diameter: (inch) 6" / (mm) 152.4 Outer Diameter: (inch) 6.5" / (mm) 165.1 Working Pressure: (Psi) 15 / (Bar) 1 *Burst Pressure is 4 x Working Pressure Specifications: ID Diameter (inches): 6" Box Dimensions: 8"H x 8"W x 8"L WT: 3 lbs UPC: 704917002545 Quick Guide (pdf)

Read more less

Silicone Rubber Sealant Cartridge - BlackAn all-purpose, non-corrosive, non-yellowing, mildew resistant, low-odor, 100% marine high quality silicone sealant. Tack-free in 30 minutes or less. *Fully cured in 24 hours. For use above or below the waterline. Will not shrink, crack, or dry out. Superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Retains flexibility and tensile strength even after years of exposure. Acid free cure will not corrode metal.

Read more less

Quick Release Plate System - White This quick-release bracket allows you to easily install or uninstall your Force® Kraken trolling motor.

Read more less

SC29 Radar Guard for M92722 for Use In Combination with Raymarine Quantum RadarPolished stainless steel guards protect radome from damage and reduce wear on the sails.Features: Mounted using radome bolts, no extra fastenings required Easy to fit – between mast mount and radar antenna Manufactured from marine grade 316 stainless steel Specifications: Type: Radar Guards Box Dimensions: 5"H x 25"W x 25"L WT: 5 lbs UPC: 5060114795693

Read more less

Scanpod Single Instrument Pod - Uncut - Arm Mounted - Fits 1" - 1.3" RailsCurrent sailboat designs often have very open cockpits with few options for installing retro-fit instruments.Options available to install a 7" display or standard instrument.Arm Mounted: Extend the Rail Pod away from narrow or crowded rails for better viewing Designed to ensure the Pod is always positioned for best viewing, whatever the angle of the rail Specifications: Cut/Uncut: Uncut Mounting Style: Rail Usable Face: 4.6"W x 4.6"H Box Dimensions: 5"H x 8"W x 8"L WT: 2.6 lbs UPC: 5060114794375

Read more less

30A 125V CordsetEEL ShorePower CordsetsOne Hand. A simple twist. Full Power.The EEL (Easily Engaged Lock) ShorePower Cordset has an industry first, jaw-clamp design providing one-handed operation and a secure waterproof seal which completely eliminates the need for a locking ring. The EEL connection is built for the harshest environments and is UL approved. This easy-to-use cordset features a built-in cord light which serves as an alert to boaters when the cord is left plugged in. And, best of all, it works with your current inlet. In addition to cordsets with the EEL System, Marinco also has a full set of Pigtail and Y adapters all using the new EEL technology.Features: Designed for use with standard inlets (NEMA)30A, 125V capacities; 50' length Cord sets meet global industry standards including ABYC and UL New wing-clamp technology provides a true, watertight connection every time Single-handed operation Eliminates the need for a sealing ring Secondary locking feature for added security Built-in LED cord light guides you to a secure connection every time, even in the dark WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage: 125v Type: Cordset Length: 50' Amperage: 30a Box Dimensions: 6"H x 12"W x 12"L WT: 14.9 lbs UPC: 093344051661 Owner's Manual (pdf)

Read more less

4" x 12" Limited Space Trim Tab Kit w/o Switch Kit -12V - Electro-Polished - Short Actuator Lenco Electric Limited Space Trim Tab Kits are ideal for boats with a swim platform and/or ladder. They can be fitted to transoms that have a limited mounting area. Blades are 12 gauge - 304 SS with front of blade folded to provide a smooth trailing edge and 1/8" diameter hinge pin. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.Kit Contents: 2 each of 12-gauge 304 stainless steel trim tab blades 2 each of #15057-001 XD actuator with 6' lead and Deutsch plugs 2 each of #30133-103  20' actuator extension wiring harnesses 2 each of #15085-001 (116) upper mounting bracket with gland seal 1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 14' to 25' Length of Tab: 4" Width of Tab: 12" Minimum Transom Height: 13" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 7"H x 7"W x 13"L WT: 13.2 lbs UPC: 874847005739 Brochure (pdf)

Read more less

Eskimo Cup Holder - 12VDC The Dometic Eskimo Cup is a thermoelectric refrigerated cup holder. It is designed to accommodate mounting into surfaces of various thicknesses.A polished marine-quality 316 stainless-steel trim ring finishes the surface installation and is accented with two blue LED interior lights.Features: Keeps cold beverages chilled while you drink them, even on a hot day Holds beverage containers up to 20 ounces (591 ml) Replaces most standard cup holders and is easy to install Polished 316 stainless steel trim ring Blue LED interior lights DC-powered premium thermoelectric Peltier cooling element Easy to keep clean with a non-stick aluminum surface and built-in drain Electronics are completely sealed for protection against salt spray Safety features include a low-voltage cut off to avoid a dead battery, a high-voltage cut off to prevent damage to the unit, a high-heat cut-off, and an in-line fuse 4" recessed cup holder Powered by the house battery *Sold as an IndividualWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

Read more less

LP Gas Regulator f/Stow 'N Go 160 GrillReplacement LP gas regulator.Compatible With: Kuuma Model 58130 (Stow N' Go 160) Kuuma Model 58131 (Stow N' Go 160) Kuuma Model 58134 (Stow N' Go 160 Canada) Kuuma Model 58135 (Stow N' Go 160 Canada) Kuuma Model 58138 (Stow N' Go 160 EU-Style) Kuuma Model 58139 (Stow N' Go 160 EU-Style) *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stow N' Go 160 Gas Grill with Thermometer and Ignitor Kuuma grills are designed for use on boats and built to withstand harsh marine environments, but are also perfect for RVing, tailgating and patio or deck grilling.  The Stow N' Go 160 is easy to transport and can be mounted to any Kuuma rail, rod or pedestal mount for use on your boat (sold separately). It is compatible with 1 lb. throwaway propane cylinders.  This high quality lightweight 304 stainless-steel barbecue increases flavor while minimizing flare-ups.  It has a large cooking area of 160 square inches, and the stainless-steel burner heats up fast, is easy to clean, and resists rust.  The integrating folding legs are perfect for tabletop use and the grill is quick and easy to assemble. This version comes built with a thermometer, and igniter for convenience out at the campsite, or on the road. Its compact design is great for storage after use. Features: Ready to use, no assembly required  Equipped with thermometer and ignitor Folding legs  Mounting bracket  Removable grease tray for easy cleaning Technical Specifications: Material - 304 Stainless Steel Total Cooking Area - 160" Sq. In.  Number of Burners - 1 Burner BTU - 13,000 Dimensions (with regulator) (L x D x H) - 23.25" x 11.25" x 11"  Weight 16 lbs Fuel Type - Propane *Sold as an IndividualWARNING: This product can expose you to chemicals including CARBON MONOXIDE which is known to the State of California to cause birth defects, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Non-Tipping 20oz Tumbler - WhiteThe Toadfish Non-Tipping 20oz Tumbler is made from high-grade stainless steel and is double-wall vacuum insulated to keep your drink icy cold or hot to the last sip. Featuring the SmartGrip suction technology, this tumbler will keep your drink upright and mess-free, along with being hard to tip, but easy to lift.  Every tumbler comes with Toadfish's shatterproof lid keeping you on the go without worrying about spilling your drink. Toadfish Model Number: TFNOTIP20OZTUM-WHITEFeatures: Color: White SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift. Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip. Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant. Shatterproof Lid - Durable lid with an easy-slide tab will keep your drink safe and easy to sip. How to Use:  To use simply place the Tumbler on any smooth surface and it will keep your drink in place (securely up-right). To remove, lift directly up.

Read more less

Perfect Pole - 2' to 4' ExtensionThe strongest, easiest-to-use cleaning extension poles on the market today.Patented Insta-just internal tracking system, with the exclusive Uni-Snap quick release mechanism, makes extending and collapsing the Perfect Pole quick and fool proof, eliminating frustrating alignment problems.  The button will pop up in the next hole, every time.  Changing accessories is a snap!Ideal for RV's and boats of all sizes.Features: Telescopes from 2' to 4' Ideal for boats 25' and under, and vehicles No-look tracking system for foolproof adjustments   Teardop design makes Perfect Pole up to 67% stronger than other telescoping handles Comfortable hand grip  Designed to work with Swobbit System Uni-Snap quick release accessories *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 2"W x 30"L WT: 1.1 lbs UPC: 633590456409 Brochure (pdf)

Read more less

Mercury Bravo 1 Anode KitContents: (1) 00815MG (1) 00820MG (1) 00828MG (2) 00818MG Material: MagnesiumPackaging: PolybagHardware: Included Specifications: Material: Magnesium Box Dimensions: 3"H x 7"W x 8"L WT: 1.5 lbs UPC: 8059617814540 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

24V Trolling Motor Wiring Kit with 70A Plug & ReceptacleThe Marinco Trolling Motor Wiring Kit makes trolling motor installation simple, packaging everything you need for a clean and professional set-up into a single box. Take the guesswork out of trolling motor installation with the Marinco Trolling Motor Wiring Kit. Bringing together the industry’s most trusted brands, the kit features marine-grade equipment for quality installations that go the distance. Clear instructions and color coding make installation quick and easy. And get total peace of mind, knowing you’ve got everything you need for a professional set-up – all in a single box.Features: Pre-terminated Connections for Quick and Easy Installation Bonded Cable for Ease of Routing Ancor® Lugs and Heat Shrink Tubing Includes Jumper to put Batteries in Series Kit Includes: 44ft of 6/2AWG Bonded Cable 50A Blue Sea Systems® 285 Series Circuit Breaker Pre-terminated Lug Connections (5/16” lugs for universal battery terminal connections, color coordinated for positive and negative) One Series Jumper for Battery Connection 70A Marinco Trolling Motor Plug and Receptacle

Read more less

LifeSeal® Sealant Cartridge - ClearA unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware. Will adhere to metal, glass, wood, Lexan®, ABS® and certain other materials. Can be removed without damaging gel-coat. Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials. Cures in presence of water. Mildew resistant and acid free.

Read more less

Watertight Connector CapThe 199110PK watertight connector cap provides CE-compliant protection for 32A or 50A products when they're not in use.

Read more less

Actuator Lower Hinge PinWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Deluxe Water Sprite Hand TowelDeluxe Spot Free Drying Towel. Dry faster than ever! This ultra absorbent Water Sprite Woven PVA drying cloth is 50% more absorbent than natural chamois and resists the growth of mold and mildew.The towels prevent water spots on all surfaces and comes in an extra large size of 23.25" x 31" (59 cm x 78 cm). Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 8"W x 10"L WT: 0.3 lbs UPC: 703485121306

Read more less

Bucket Seat/Lid - WhiteFeatures: Contoured, durable and soft lid for seating Protects bucket contents from weather Color: White Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 12"W x 12"L WT: 0.95 lbs UPC: 703485121245

Read more less

Remote Cellular & GPS Antenna - Adhesive Mount Puck Enjoy enhanced location and cellular connectivity reception for your Siren 3 Pro all with one combination antenna.The Remote GPS & Cell Antenna Adhesive-Mount Puck is easy to mount and will extend the GPS and cellular range capabilities of your Connected Boat® System, strengthening your connection to your boat for the ultimate peace of mind.Compatible With:Siren 3 ProTechnical Specifications: Cable length - 9.8 ft (3 m) Dimensions (H x Dia.) - 0.5" x 2.5" (12 x 62.8 mm) *Sold as an Individual 

Read more less

12V Compact Single Trumpet Electric HornThe compact design of this trumpet horn makes it ideal for installation in smaller spaces.Features: 100 percent stainless steel exterior Type 304 stainless steel diaphragm Dimensions: 14" L x 3.5" W x 4" H Maximum amp draw: 3.5 amps 12 volt dB(A) rating: 108 at one meter Fundamental frequency: 420 +/- 20Hz Specifications: Voltage - Input Range (Volts): 12v Color: Stainless Box Dimensions: 4"H x 8"W x 17"L WT: 1.8 lbs UPC: 035028100104

Read more less

Reed Switch Fuel Sender - 600 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 23.6" (600mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 27"L WT: 1 lbs UPC: 754059064468

Read more less

Riptide Terrova® 55 Trolling Motor with Wireless Remote - 12V - 55LB - 60"What makes Riptide Terrova® so popular in Saltwater? How about unlocking more boat control than ever before? Start with Minn Kota's most advanced GPS trolling system, including Spot-Lock®. Top it off with all the thrust you need to take on any water and an effortless stow and deploy. That's what makes this workhorse one of the most trusted, most capable, and most proven motors on the water.Advanced GPS Trolling SystemThe most-trusted navigation system in fishing. Riptide Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and controls automatic, and you can take command from the easy-to-read LCD screen of Riptide Terrova's wireless remote.Spot-Lock with JogSpot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the wireless remote or Humminbird fish finder.AutoPilot™Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves, and current.Push-to-Test Battery MeterPress a button on the trolling motor head to get an instant status of how much battery life you have left.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Weedless Wedge™ 2 PropWith swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Mobile App CompatibilityControl Terrova directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and AutoPilot — plus the ability to update software.Advanced Corrosion ProtectionRiptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder-coated paint provides the ultimate protection.What's IncludedRiptide Terrova 55 lb. 60" motor, Wireless Remote, Lanyard, Heading Sensor, MKP-32 Prop and Mounting HardwareSpecifications: For Use In: Saltwater Shaft Length: 60" Voltage: 12 One-Boat Network Compatible: Yes QUEST Series: No Spot-Lock: Yes Built-In Sonar: None Foot Pedal Style: Not included Control: Wireless remote Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: Yes i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: No CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 50 Mount Style: Bolt-On Mounting Location: Bow-mount Motor Style: Electric-steer Prop: Weedless Wedge 2 (MKP-32) Warranty: Two-year warranty Specifications: Built-In Transducer: No Control Type: Wireless Remote Included Propeller: MKP-33 Mounting Style: Bow Salt Water/Fresh Water: Salt Series: Riptide Terrova Shaft Length (Inches): 60" Thrust (Pounds): 55 lbs Voltage - Input Range (Volts): 12v Box Dimensions: 10"H x 16"W x 74"L WT: 58 lbs UPC: 029402050758 Owner's Manual (pdf)

Read more less

Turning Point Hub Kit: 22Features Lifetime Warranty Never buy another hub kit system again Inner splines adapt to the engine Outer hub compatible with different props Reduce gear shock & engine/drive damage Save up to 30% when purchasing a replacement prop Eliminate propeller vibration & chatter Eliminate hub cracking & failure Corrosion resistant materials - brass splines Reduce gear shock & engine/drive damageWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

G-Force ELIMINATOR Black Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

Troll-Tamer™ for Minn Kota Fortrex/Ultrex Trolling Motor Stabilizer Lock 5"-8" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Read more less

MACH™ Series High Efficiency & Flexibility Engine Control Cable - 33C Universal Style  - 8'MACHZero - Universal style (like C2, C8)MACHZero: 87 mm (3.4”) For use with inboard, sterndrive and outboard engines. Ideal for high performance applications, long cable runs and complex routings. Blue color jacket designed for high performance applications.For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement. Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required. Mach Series cables also feature solid stainless steel output fittings.The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables. The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.Features: Suitable for outboard – inboard and sterndrive engines High efficiency for smooth operation High flexibility for reduced bend radius Ideal for long complex cable routing Maintenance free Stainless steel cables end fittings Blue outer jacket resists against abrasion, UV and chemicals

Read more less

Exrust - Liquid - 16oz BottleExrust penetrates and chemically reacts with rust to quickly remove it from all surfaces. Effective on all ferrous metals without harming the base steel or iron*.*Do not use on non-ferrous metals.Industrial Strength Rust RemoverExrust penetrates and chemically reacts with rust to quickly remove it from all surfaces. Effective on all ferrous metals without harming the base steel or iron*. After treatment, any type of finish can be applied. 50-State VOC Compliant.*Do not use on non-ferrous metals. **Additional Hazmat shipping charges. This product cannot be sold or shipped to California.Features: Powerful - Penetrates and chemically reacts with rust Fast - Quickly removes rust from all surfaces Versatile - Quickly removes rust from all surfaces

Read more less