Mg Fiberglass Oxidation Removal KitA specialized three-step system that will effectively restore all fiberglass gelcoats. No. 49 Oxidation Remover will remove oxidation, stains, and scratches No. 45 Polish will restore brilliant gloss to the finishNo. 56 Pure Wax will provide long-lasting, durable protection to the restored surface. Specifications: Type: Fiberglass Box Dimensions: 4"H x 6"W x 9"L WT: 3.8 lbs UPC: 070382149659

Read more less

PVA TowelPVA towels absorb 50 percent more water than natural chamois, making for faster and more effective drying. The towels prevent water spots on all surfaces and come in an extra large size of 17" x 27" (43 cm x 69 cm).Features: Extra large size of 17" x 27" High-tech, synthetic material Lint free and resists mold and mildew Absorbs 50% more water than natural chamois Prevents water spots on all surfaces Instructions:After taking the towel out of the container, dampen it and wring out any excess water. Dry sections of the surface until the towel is saturated; wring it out and repeat. Wring it out before putting it back in the container. Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 4"W x 10"L WT: 0.4 lbs UPC: 703485502204

Read more less

Shur-Lok AdaptersThreaded Adaptercompatible with most internally threaded products Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 4"W x 7"L WT: 0.15 lbs UPC: 703485101018

Read more less

CAM-PT-300-03 Aluminum PowerTower® f/FLIR M300 Cameras - 12"Expertly designed to install your camera on the cabin roof, flybridge or radar arch of your powerboat.  Scanstrut thermal camera mounting solutions ensure you get the most from this ground-breaking new technology.Compatible with: FLIR M300 camerasFeatures: Designed to fit the most up to date cameras Pre-drilled mounting holes allow the camera to fasten straight to the PowerTower® No need to cut the cameras connectors off for installation  Constructed from Marine grade Aluminium Technical Specifications: Material - Aluminium Height - 11.81" (300mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Construction: Powder Coated Aluminum Type: Aft Leaning Mount Height: 12 Box Dimensions: 11"H x 13"W x 16"L WT: 7.5 lbs UPC: 5060114797659 Quick Guide (pdf)

Read more less

C.H. Cleans Hoses for Tanks & MSD - 1 QuartC.H. dissolves scale and calcium build-up and adds life to your boat's sanitation system while providing less maintenance and less cost over time. C.H. is specifically designed to remove uric scale and calcium carbonate from black water systems - from the toilet to the holding tank - without having to remove hoses. Simply pour the recommended mixture in, allow to sit in hoses or tanks and let it go to work! By properly maintaining all connections and hoses it can save hours of messy work trying to unclog a system. A typical 1 ½” hose can be completely filled up within just a few years of use. Hoses can become so built up to the point where there is less than ¼” of space for anything to move through. Regular checking of build up and cleaning of hoses can prevent a situation where nothing leaves the toilet! Features:  Dissolves clogs which can cause odors and poor flushing performance Non toxic, biodegradable and safe to use with all materials commonly found in black water systems Safe and effective alternative to hazardous muriatic acid treatments Recommended for Lectra/San and Electroscan systems WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Bilge & Holding Tank Box Dimensions: 3"H x 3"W x 10"L WT: 3.5 lbs UPC: 085462040856 Brochure (pdf)

Read more less

APT-GPS-01 PowerTower® Center Mounted Bar f/GPS/VHF/Navtex AntennaMounts GPS, VHF and Navtex antennas above the radar for maximum visibility and performance.  Works with standard 1” x 14 TPI thread.Compatible with:Scanstrut aft leaning PowerTower® radar mountsFeatures: Designed for the installation of GPS antenna and ‘Whip’ type VHF, HF/SSB, AM/FM, and cellular antenna of up to 1m in height All mounting holes predrilled for easy retrofit installation, attach using mounting bolts.  No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - Aluminum  Height - 12.48" (404mm) Mount Position - Center In the Box: Antenna bar Instruction manual *Sold as an Individual Specifications: Construction: Aluminum Type: Mounting Brackets Height: 12.48 Box Dimensions: 4"H x 16"W x 19"L WT: 3.7 lbs UPC: 5060114795433 Quick Guide (pdf)

Read more less

12" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features: Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap Automatic nozzle shutoff 4-18 gpm Stainless Steel finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

316 Stainless Steel Alloy Flush Mount Fuel Vent - Straight Vent On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets.Features:Straight VentSpecifications: Hose Size (inch): 5/8" inner diameter Maximum Hull Thickness (inch): 7/8" Installation Hole Size (inch): 1-3/8" *Includes two silicone gaskets Quick Guide (pdf)

Read more less

Sikasil®-N Plus Clear 10oz with NozzleSikasil®-N Plus US is a general-purpose, one-component, non-sag, elastomeric, 100% RTV neutral cure silicone sealant. Meets the requirements of ASTM C-920, Type S, Grade NS, Class 25, Use NT, T, M, G, A, O; TT-S-00230C, Type II, Class A; TT-S-001543A, Class A; CAN/CGSB-19.13-M87, AAMA 802.3 Type II, AAMA 803.3, AAMA 805.2, AAMA 808.3 and California Air Resources Board 2003 requirements for Volatile Organic Compound content. Features: Extremely long service life Excellent flexibility for dynamic joint movement Bonds to most substrates without priming Usage: Window and door fabrication Conventional glazing Back bedding and cap, toe and heel beads Perimeter sealing of windows, doors, and skylights Expansion and control joints HVAC, White goods assembly Kitchen and bath countertops/solid surfaces, Sanitary Seals Marine cabins Truck/trailer/auto/RV Typical Substrates:  Glass, aluminum, tile, fiberglass, plastic, ceramic, masonry, concrete, brick and wood Advantages: Extremely long service life Excellent flexibility for dynamic joint movement Bonds to most substrates without priming Ready to use, no mixing required AAMA Certified component for window backbedding/glazing All season ease of application Fungicide additive for mildew resistance

Read more less

Megaware SkegGuard® 27181 Stainless Steel Replacement Skeg Model Guide Force - 85-90-120-125-150 2 Stroke 1988-1996 90-120-150 2 Stroke ‘L’ Drive 1988-1991Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & ReplacementMegaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.Protect Your Skeg with the Best ProtectorThe Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.Megaware SkegGuard® is available in models to fit virtually any skeg.WarrantyMegaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.Features: Mirror Polished Marine Grade 316 Stainless Steel Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running Drain Hole Prevents Corrosion and Freezing Won’t Compromise Performance Do-It-Yourself Install in Less than 10 Minutes Installs with as Little as 2-3 Inches of Skeg Remaining Specifications: Color: Stainless Box Dimensions: 1"H x 9"W x 19"L WT: 1.5 lbs UPC: 672057271810 Brochure (pdf)

Read more less

Megaware SkegGuard® 27171 Stainless Steel Replacement Skeg Model Guide Honda - 35-40-45-50 4 Stroke 1991-Present 90 4 Stroke 2008-Present Mariner - 40-50-60 2 Stroke 1986-2002 Mercury - 40 2 Stroke 1989-2002 50 2 Stroke 1986-1999 60 1990-2000 Nissan/Tohatsu - 35-40-50 2 Stroke 1993-Present Suzuki - 40-50-60-70 4 Stroke 2003-Present Yamaha - 40-50-55-85 CV 2 Stroke 1984-1995 60 2 Stroke Enduro 1995-2006 75 2 Stroke Enduro 1996-1999 Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & ReplacementMegaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.Protect Your Skeg with the Best ProtectorThe Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.Megaware SkegGuard® is available in models to fit virtually any skeg.WarrantyMegaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.Features: Mirror Polished Marine Grade 316 Stainless Steel Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running Drain Hole Prevents Corrosion and Freezing Won’t Compromise Performance Do-It-Yourself Install in Less than 10 Minutes Installs with as Little as 2-3 Inches of Skeg Remaining Specifications: Color: Stainless Box Dimensions: 1"H x 8"W x 18"L WT: 1 lbs UPC: 672057271711 Brochure (pdf)

Read more less

Megaware SkegGuard® 27301 Stainless Steel Replacement Skeg Model Guide  Yamaha - 200-225-250-300 2 & 4 Stroke 2003-PresentInexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & ReplacementMegaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.Protect Your Skeg with the Best ProtectorThe Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.Megaware SkegGuard® is available in models to fit virtually any skeg.WarrantyMegaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.Features: Mirror Polished Marine Grade 316 Stainless Steel Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running Drain Hole Prevents Corrosion and Freezing Won’t Compromise Performance Do-It-Yourself Install in Less than 10 Minutes Installs with as Little as 2-3 Inches of Skeg Remaining Specifications: Color: Stainless Box Dimensions: 1"H x 9"W x 19"L WT: 1.6 lbs UPC: 672057273012 Brochure (pdf)

Read more less

KeelGuard® - 8' - BlackThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Black KeelGuard® Size: 8' Boat Size up to 22' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 8' Color: Black Boat Length - Max (Feet): 22' Box Dimensions: 6"H x 8"W x 8"L WT: 4.25 lbs UPC: 672057202081 Brochure (pdf)

Read more less

KeelGuard® - 8' - GrayThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Gray KeelGuard® Size: 8' Boat Size up to 22' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 8' Color: Grey Boat Length - Max (Feet): 22' Box Dimensions: 6"H x 8"W x 8"L WT: 4.5 lbs UPC: 672057205082 Brochure (pdf)

Read more less

KeelGuard® - 4' - BlackThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Black KeelGuard® Size: 4' Boat Size up to 14' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Boat Length - Max (Feet): 14' Length: 4' Color: Black Box Dimensions: 6"H x 8"W x 8"L WT: 2 lbs UPC: 672057202043 Brochure (pdf)

Read more less

SkegGuard® 27041 Stainless Steel Replacement SkegModel Guide  Yamaha - 200-225-250V Max SHO 2013-Present 200V Max HPDI 2004-2010Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & ReplacementMegaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.Protect Your Skeg with the Best ProtectorThe Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.Megaware SkegGuard® is available in models to fit virtually any skeg.WarrantyMegaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.Features: Mirror Polished Marine Grade 316 Stainless Steel Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running Drain Hole Prevents Corrosion and Freezing Won’t Compromise Performance Do-It-Yourself Install in Less than 10 Minutes Installs with as Little as 2-3 Inches of Skeg Remaining Specifications: Color: Stainless Box Dimensions: 2"H x 9"W x 20"L WT: 1.8 lbs UPC: 672057270417 Brochure (pdf)

Read more less

SkegGuard® 27141 Stainless Steel Replacement Skeg Model Guide  Suzuki - 150-175-200-225 2 Stroke 1986-2002 150-175-200-225 4 Stroke 2003-PresentInexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & ReplacementMegaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.Protect Your Skeg with the Best ProtectorThe Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.Megaware SkegGuard® is available in models to fit virtually any skeg.WarrantyMegaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.Features: Mirror Polished Marine Grade 316 Stainless Steel Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running Drain Hole Prevents Corrosion and Freezing Won’t Compromise Performance Do-It-Yourself Install in Less than 10 Minutes Installs with as Little as 2-3 Inches of Skeg Remaining Specifications: Color: Stainless Box Dimensions: 1"H x 9"W x 17"L WT: 1.7 lbs UPC: 672057271414 Brochure (pdf)

Read more less

KeelGuard® - 10' - WhiteThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: White KeelGuard® Size: 10' Boat Size up to 26' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 10' Color: White Boat Length - Max (Feet): 26' Box Dimensions: 6"H x 8"W x 8"L WT: 5.5 lbs UPC: 672057201107 Brochure (pdf)

Read more less

KeelGuard® - 6' - GrayThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Gray KeelGuard® Size: 6' Boat Size up to 18' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 6' Color: Grey Boat Length - Max (Feet): 18' Box Dimensions: 6"H x 8"W x 8"L WT: 3 lbs UPC: 672057205068 Brochure (pdf)

Read more less

KeelGuard® - 9' - BlackThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Black KeelGuard® Size: 9' Boat Size up to 24' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 9' Color: Black Boat Length - Max (Feet): 24' Box Dimensions: 6"H x 8"W x 8"L WT: 4.75 lbs UPC: 672057202098 Brochure (pdf)

Read more less

KeelGuard® - 5' - GrayThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Gray KeelGuard® Size: 5' Boat Size up to 16' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 5' Color: Grey Boat Length - Max (Feet): 16' Box Dimensions: 6"H x 8"W x 8"L WT: 2.5 lbs UPC: 672057205051 Brochure (pdf)

Read more less

KeelGuard® - 7' - CharcoalThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Charcoal KeelGuard® Size: 7' Boat Size up to 20' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 7' Color: Charcoal Boat Length - Max (Feet): 20' Box Dimensions: 6"H x 8"W x 8"L WT: 3.75 lbs UPC: 672057207079 Brochure (pdf)

Read more less

12-Piece Dinnerware Set - BPA Free - Serves 4The Camco Marine Dinner Set includes place settings for four, bowls, salad plates and dinner plates. The bowl is white with a navy blue anchor design, the small plate is blue and white striped and the large plate is blue with a white anchor design. The durable dinnerware is great for boats, RVs, and camping. The Marine Dinner Set is easy to clean and top rack dishwasher safe, and BPA free. Do not use in the microwave.Features: Includes four bowls, four small salad plates and four large dinner plates Blue and white nautical design Virtually unbreakable Top rack dishwasher safe BPA free

Read more less

Replacement Blade for Rope CutterIdeal for boat, camper and home use. Lightweight (1. 5 lbs. ), The handle fits in the palm of your hand with easy finger pull operation. It makes quick clean cuts in all types of synthetic ropes, lines and strapping. Comes with a generous 4 foot cord. Operates on 120V AC power.

Read more less

Heavy Texture RollerA high quality 9" x 3/8" foam nap roller for easily and consistently applying GripTide™ Non-Skid Deck Coating. Features: Evenly applies GripTide Non-Skid Deck Coating Results in a uniform coarse texture Use with any standard roller handle and tray Applications:GripTide Non-Skid Deck Coating

Read more less

MACH™ Series High Efficiency & Flexibility Engine Control Cable - Mercury Gen II - 16'MACH36 - Gen II Mercury® style (like C36)MACH36 Stroke: 87 mm (3.4”). For Mercury® and Mercruiser® engines and Mercury® Generation II™ series controls. Blue color jacket designed for high performance applicationsFor the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement. Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required. Mach Series cables also feature solid stainless steel output fittings.The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables. The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.Features: Suitable for outboard – inboard and sterndrive engines High efficiency for smooth operation High flexibility for reduced bend radius Ideal for long complex cable routing Maintenance free Stainless steel cables end fittings Blue outer jacket resists against abrasion, UV and chemicals

Read more less

M90 Mach Black Rotary Steering Cable - 10'Uflex M90 Mach Rotary Steering Cable provides boat steering systems with increased flexibility and durability from top-quality materials and construction. M90 Mach cables use a patented design offering high efficiency and performance in mechanical steering systems.Features: Minimal feedback Fast connections for simple installation Ideal for long cable runs and tight bend applications - Minimum steering cable bend radius: 150 mm (5.9") Stainless steel cable output end featuring patented gasket (engine side) Specifications: Cable Length (Feet): 10' Box Dimensions: 3"H x 18"W x 27"L WT: 6.2 lbs UPC: 702755052029

Read more less

APT-LB-01-BLK PowerTower® Center Mounted Light Bar - BlackInstalls navigation lights above the antenna for maximum visibility and performance.Compatible with:Scanstrut aft leaning PowerTower® radar mountsFeatures: All mounting holes predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - Aluminum  Height - 25.4" (404mm) Mount Position - Center In the Box: Light bar Instruction manual *Sold as an Individual Specifications: Construction: Aluminum Type: Light/GPS Brackets Height: 25.4 Box Dimensions: 5"H x 16"W x 22"L WT: 3.35 lbs UPC: 5060114797703 Quick Guide (pdf)

Read more less

Moldaway 12oz JarBleach-free and chlorine-free oxygenated cleaner that is safe on most fabrics/colors.Moldaway is a scientifically formulated, powdered, oxygenated cleaner. It quickly removes stains caused by: Mold Mildew Algae Dirt Blood Food & drink It contains no bleach or chlorine products, so it's safe on all colors as well as most fabrics including: Vinyl Canvas Plastic Carpeting Interior and exterior cushions Sails Wood and boating accessories MADE IN USA. Specifications: Type: Mildew & Moisture Box Dimensions: 4"H x 4"W x 4"L WT: 0.9 lbs UPC: 703485120170

Read more less

Replacement Cover f/Shur-LOK Swivel PadIncludes (1)Synthetic Lambs Wool Replacement Cover Specifications: Type: Buffers & pads Box Dimensions: 3"H x 6"W x 11"L WT: 0.2 lbs UPC: 703485617106

Read more less

Electric Actuator for BOLTThis robust, water-tight black nylon actuator provides trouble-free operation for years to come.Specifications: 12 VDC 20 A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

1 Liter Pouch  - Cream with 4" RollerKiwiGrip is a durable, non-skid deck coating system developed by New Zealand yachtsmen specifically for use on boats. Most other traction or anti slip coatings are simply repackaged industrial products.The hard acrylic polymer provides a durable, homogeneous, elastic surface. It spreads quickly and easily. By using one of KiwiGrip's proprietary rollers and by varying application technique, the texture can be adjusted from fine to aggressive for the right amount of traction.In late 2011, KiwiGrip introduced an improved formulation for longer working time and improved color retention.Features: Low-glare, IR reflective finish Homogenous color that won't wear through and expose filler materials UV stabilizer for consistent color Vary texture by application technique used Apply over wood, fiberglass, epoxy, concrete, or metal Rolls over other worn non-skid surfaces nicely Non-toxic, no volatile solvents, very low VOC Cleans up with soap and water Complete, detailed "how-to" instructions come with every can Coverage: 2 square meters per liter (80 SF/Gal) Specifications: Color: Cream Box Dimensions: 3"H x 6"W x 10"L WT: 3.7 lbs UPC: 015568074639

Read more less

1 Liter Pouch  - Grey with 4" RollerKiwiGrip is a durable, non-skid deck coating system developed by New Zealand yachtsmen specifically for use on boats. Most other traction or anti slip coatings are simply repackaged industrial products.The hard acrylic polymer provides a durable, homogeneous, elastic surface. It spreads quickly and easily. By using one of KiwiGrip's proprietary rollers and by varying application technique, the texture can be adjusted from fine to aggressive for the right amount of traction.In late 2011, KiwiGrip introduced an improved formulation for longer working time and improved color retention.Features: Low-glare, IR reflective finish Homogenous color that won't wear through and expose filler materials UV stabilizer for consistent color Vary texture by application technique used Apply over wood, fiberglass, epoxy, concrete, or metal Rolls over other worn non-skid surfaces nicely Non-toxic, no volatile solvents, very low VOC Cleans up with soap and water Complete, detailed "how-to" instructions come with every can Coverage: 2 square meters per liter (80 SF/Gal) Specifications: Color: Grey Box Dimensions: 4"H x 6"W x 10"L WT: 3.7 lbs UPC: 015568074615

Read more less

1 Liter Pouch  - White with 4" RollerKiwiGrip is a durable, non-skid deck coating system developed by New Zealand yachtsmen specifically for use on boats. Most other traction or anti slip coatings are simply repackaged industrial products.The hard acrylic polymer provides a durable, homogeneous, elastic surface. It spreads quickly and easily. By using one of KiwiGrip's proprietary rollers and by varying application technique, the texture can be adjusted from fine to aggressive for the right amount of traction.In late 2011, KiwiGrip introduced an improved formulation for longer working time and improved color retention.Features: Low-glare, IR reflective finish Homogenous color that won't wear through and expose filler materials UV stabilizer for consistent color Vary texture by application technique used Apply over wood, fiberglass, epoxy, concrete, or metal Rolls over other worn non-skid surfaces nicely Non-toxic, no volatile solvents, very low VOC Cleans up with soap and water Complete, detailed "how-to" instructions come with every can Coverage: 2 square meters per liter (80 SF/Gal) Specifications: Color: White Box Dimensions: 4"H x 6"W x 14"L WT: 3.7 lbs UPC: 015568074592

Read more less

4 - 1 Liter Pouches  - Cream with 4" RollerKiwiGrip is a durable, non-skid deck coating system developed by New Zealand yachtsmen specifically for use on boats. Most other traction or anti slip coatings are simply repackaged industrial products.The hard acrylic polymer provides a durable, homogeneous, elastic surface. It spreads quickly and easily. By using one of KiwiGrip's proprietary rollers and by varying application technique, the texture can be adjusted from fine to aggressive for the right amount of traction.In late 2011, KiwiGrip introduced an improved formulation for longer working time and improved color retention.Features: Low-glare, IR reflective finish Homogenous color that won't wear through and expose filler materials UV stabilizer for consistent color Vary texture by application technique used Apply over wood, fiberglass, epoxy, concrete, or metal Rolls over other worn non-skid surfaces nicely Non-toxic, no volatile solvents, very low VOC Cleans up with soap and water Complete, detailed "how-to" instructions come with every can Coverage: 2 square meters per liter (80 SF/Gal) Specifications: Color: Cream Box Dimensions: 6"H x 7"W x 14"L WT: 13.3 lbs UPC: 015568074646

Read more less

APT-250-02 - Aluminum PowerTower® Radar Mount - 10" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18" and 24") radars Humminbird - AS 21 RD4KW radar Intellian - i1 radars Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars Koden - 2kW 12" radar KVH - TracVision M1 and TV1 radars Lowrance - 3G/4G, LRA-1800, RB714A, DX42, LRA-2400 HD radars Majestic - SATMAR32 radar Navman - 8000 Series (8084 and 8120) 18" radars Nobletec - 2kW - 20" radars Northstar - M Series 18" and 24"  8000i radars Raymarine - 33STV radars Seiwa - SWR-1, 8, 9 radars Simrad - 3G/4G, GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 Radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Construction: Aluminum Height: 9.84 Type: Aft Leaning Mount Box Dimensions: 8"H x 9"W x 15"L WT: 5 lbs UPC: 5060114797734 Quick Guide (pdf)

Read more less

PA2-NTNetwork Terminators Quick Guide (pdf)Brochure (pdf)

Read more less

Control Unit - 42017 FControl Unit: user interface for the configuration, settings and diagnostic of all the modules in a system.IP protection: IP65Dim.: 215mm x 120mm (8.5" x 4.7") Quick Guide (pdf)Brochure (pdf)

Read more less

White Cloud High Gloss Polymer 2.0 - QuartSmoove’s “easy on, easy off” formula will bond to the surface and produce an extreme shine and long-lasting protection. White Cloud works best on a clean, non-oxidized surface that has been prepped using one of Smoove’s polishes or just after using Smoove's “Bubble Gum." Can be removed by hand or machine.For best results, hand-apply a super-thin layer to the surface up to 15 feet at a time. Let it haze, then buff it off with a clean polish pad. Use either a yellow wool polish pad or a black foam pad.Features:Delivers unmatched durability and shine in harsh environmentsSpecifications:Size: Quart Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 9"L WT: 2.3 lbs UPC: 794811504610

Read more less

Signaling Mirror with LanyardHigh quality, durable construction, will not corrode due to effects of salt water.Features: View finder and lanyard Visiblity to 10 miles Measures 3" x 4" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Sirocco II Elite Fan - BlackThis revolutionary cabin fan is the finest in its class.The Sirocco II Elite is the world's first brushless DC cabin fan.  Compared to the Sirocco II and other fans with conventional motors, the Elite's motor is designed to last up to four times as long.  In addition to exceptional longevity, the fan offers an unmatched combination of build quality, airflow, whisper-quiet operation, and a four-year warranty.  Beyond performance, the attractively designed fan will make a statement of sophistication in any galley, salon, or stateroom.Features: Powerful, extra-long life brushless motor (est. 20,000 hours!) 4-Year Warranty 4 Speed settings Whisper Quiet 360° Directional Airflow 12 and 24VDC (Auto-sensing) Same mounting footprint as Sirocco and Sirocco II 30% increase in airflow across all speed settings compared to Sirocco II (110-240CFM) Premium design with stainless steel grill and center badge Gimbaled design for 360° directional airflow with 4-speeds Auto shutoff with 4 timer settings of 3, 6, 9, or 12 hours Made in Canada Brochure (pdf)

Read more less

MareLube Valve General Purpose Lubricant - 4 oz.Marelube is Forespar's new family of three specifically formulated synthetic lubricants designed for various uses around your boat. Each contains PTFE and they work equally well in fresh or salt water. Marelube Valve Lubricant is an advanced lubrication formula designed to keep valve seals and balls working smoothly in marine plumbing systems. It is a clear, non-staining and nontoxic lube that is perfect for traditional bronze fittings, as well as all composite plumbing fixtures like Forespar's Marelon parts. Features: General Purpose PTFE Synthetic Lubrication Clear, Non-Staining and Non-Toxic Compatible With Bronze or Marelon Components Keeps Seals and Balls Working Smoothly Specifications: Type: Grease Box Dimensions: 3"H x 3"W x 3"L WT: 0.3 lbs UPC: 028026190697

Read more less

O-Ring Silicone Grease - 3oz TubeUsing Super Lube® Silicone O-Ring Grease during installation helps protect an O-Ring from damage by abrasion, pinching, or cutting. It also helps to seat the O-Ring properly, speeds up assembly operations, and improves automated assembly.Lubricating the O-Ring with Super Lube® Silicone O-Ring Grease in dynamic and pneumatic applications extends the equipment’s service life.Super Lube® Silicone O-Ring Grease is compatible with the majority of rubber and plastic compounds. Super Lube® Silicone O-Ring Grease will help reduce the overall leak rate in vacuum applications by filling the spaces of the gland’s surfaces and lowering permeation rates of the elastomer.Super Lube® Silicone O-Ring Grease is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines.Super Lube® Silicone O-Ring Grease is Kosher Certified.

Read more less

Silicone Heat Sink Compound - 3oz TubeSuper Lube® Silicone Heat Sink Compound is a non-curing silicone paste, blended with thermally conductive, fine metal oxide powders. It will not harden, dry out or melt, and aids in the efficient transfer of heat away from electronics and electrical components.Super Lube® Silicone Compound can be used in temperatures from -40°F to 500°F (-40°C to 260°C).

Read more less

Multi-Purpose Synthetic Grease with Syncolon® - 14.1oz CanisterSuper Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon®. Synthetic base fluids and the addition of Syncolon® micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to 232°C). Machinery lasts longer, downtime is reduced and productivity is increased.Super Lube® Multi-Purpose Synthetic Grease is dielectric, food grade, clean and environmentally friendly. It offers good mechanical stability, does not evaporate or form gummy deposits. It will not melt or separate.Features: Super Lube® Multi-Purpose Synthetic Grease is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines. Super Lube® Multi-Purpose Synthetic Grease is Kosher Certified. NGLI Grade 2 Grease is NLGI GC-LB Certified. Available in NLGI Grades: 1, 0, 00, 000. Part numbers are identified by /1, /0, /00, /000. Available with UV additive for traceability – validates the existence of the lubricant. Part numbers are identified by /UV. Specifications: Type: Grease Box Dimensions: 4"H x 4"W x 4"L WT: 1.05 lbs UPC: 082353411603

Read more less

Silicone Lubricating Brake Grease with Syncolon® - 8oz TubeSuper Lube® Silicone Lubricating Brake Grease with Syncolon® is an NLGI Grade 2 compound designed for caliper and wheel cylinder assembly work, as silicone is an excellent lubricant for rubbers and plastics. It is compatible with the majority of rubber compounds, including nitrile, nylon, and other synthetic rubbers. See Compatibility Chart under Technical Resources for further details.Super Lube® Silicone Lubricating Brake Grease should be used at every point in the brake system where parts slide or move. With disc brakes, lubrication points include: caliper slides, pins, bushings, and contact points where the pads slide within the caliper housing. It can be applied to self-adjuster mechanisms on rear disc brakes with locking calipers, parking brake cables and linkages.Super Lube® Silicone Lubricating Brake Grease can also be used to dampen vibrations between disc brake pads and caliper pistons. It should NOT be applied between the pads and any noise suppression shims. Use it sparingly on the back of a bare pad or between the pad shim and caliper.Super Lube® Silicone Lubricating Brake Grease is dielectric, food grade, clean and environmentally friendly. This product is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines.Super Lube® Silicone Lubricating Brake Grease is Kosher Certified. Specifications: Type: Grease Box Dimensions: 2"H x 3"W x 9"L WT: 0.6 lbs UPC: 082353970087

Read more less

Chesapeake Black 2" Fuel Level Gauge (Metric)Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.Fuel Level gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel.2" - Hole Size: 2.0625" (53mm)Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N GP9777*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Fuel Level Gauge Size: 2" Series: Chesapeake Black Box Set: No Voltage - Input Range (Volts): 12/24 V Box Dimensions: 3"H x 4"W x 5"L WT: 0.4 lbs UPC: 759266137219

Read more less