Roller Shaft 5/8" x 13" with Cap NutsReplacement Roller shaft and cap nuts.Features: 5/8" diameter x 13" long Zinc Plated Comes with two 5/8" cap nuts

Read more less

Swivel Bracket Assembly - 8" BracketThis Smith adjustable bracket is designed to support bunk boards. Hot dip galvanizing for years of use in the harsh marine environment.This bracket assembly uses bolster bracket-10100G and swivel bracket-10200G.Features: Bolster bracket: 8" bracket, 11 gauge material, 2-1/2" wide, slots 1/2" wide, swivel hole 1/2" dia., slots 2-3/4" Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia., swivel flange 2" tall x 3-1/2", swivel flange hole 1/2" dia., hole centers 2-1/2" Overall assembly length is 9"

Read more less

Bow Roller - Black - 3" Diameter - 3-1/8"W - 1/2" IDBlack natural rubber rollers are original equipment on many trailers. Fits standard brackets and shaft sizes.Features: Black natural rubber 3" Diameter 3-1/8" wide 1/2" shaft

Read more less

53696 Rod Safety RingAttach the C.E. Smith Rod Safety Ring to the bottom of rod holders and stop worrying about dropping your equipment.  Made to secure into the 0.5" drain hole found at the bottom of the flush-mount cast-bottom rod holder from C.E. Smith, the rod safety ring gives you a convenient place for you to tether your rod and reel, boat fender, or any other valuable you don't want to fall overboard. Features: Provides a convenient place to secure rods 316L Marine-grade stainless steel Quick and easy installation *Sold as an Individual

Read more less

536800S - Flush Mount Rod Holder - 0 Degree - Swivel - 10.5" DeepThe larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. The rod holder has no logo on the cap for a sleek low profile. Technical Specifications: Material - 316L Stainless Steel Angle - 0° Bottom Style - Swivel Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2.5 Finish: Silver Length (Inches): 10.5 Mounting Style: Surface Box Dimensions: 6"H x 6"W x 16"L WT: 3.2 lbs UPC: 768296011222

Read more less

536810C - Flush Mount Rod Holder - 15 Degree - Cast - 10.5" DeepThe larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place.  The Rod holder has no logo on the cap for a sleek low profile. Technical Specifications: Material - 316L Stainless Steel Angle - 15° Bottom Style - Cast Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2.5 Finish: Silver Length (Inches): 10.5 Mounting Style: Surface Box Dimensions: 6"H x 6"W x 16"L WT: 3.05 lbs UPC: 768296011253

Read more less

Angled Post Guide On - 40" - BlackProviding an easy visual while centering your boat.The angled PVC Post Guide-Ons allow you to easily center your boat on your trailer at the ramp.Features: Fits trailer frames 3-1/4” wide by 4” tall Mounts above or below the trailer frame Adjusts up to 13” away from the trailer frame Angled to allow for wide or flared hulls 40” Tall For larger frames use with P/N 11416 mounting U-bolts

Read more less

Angled Post Guide On - 40" - WhiteProviding an easy visual while centering your boat.The angled PVC Post Guide-Ons allow you to easily center your boat on your trailer at the ramp.Features: Fits trailer frames 3-1/4” wide by 4” tall Mounts above or below the trailer frame Adjusts up to 13” away from the trailer frame Angled to allow for wide or flared hulls 40” Tall For larger frames use with P/N 11416 mounting U-bolts

Read more less

Adjustable Mid Mount Rod Holder - 1.66" or 1-1/2" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1.66" or 1-1/2" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-1/2" Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010669

Read more less

Adjustable Mid Mount Rod Holder - 1-1/4" or 1-5/16" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1-1/4" or 1-5/16" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Powder Coated Aluminum Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-1/4" Box Dimensions: 4"H x 11"W x 13"L WT: 1.55 lbs UPC: 768296010652

Read more less

Adjustable Mid Mount Rod Holder - 7/8" or 1" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 7/8" or 1" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 7/8" Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010645

Read more less

Adjustable Mid Mount Rod Holder Aluminum 1.66" or 1-1/2" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1.66" or 1-1/2" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Inches): 10" Finish: Polished Diameter (Inches): 1-1/2" Construction: Aluminum Mounting Style: Rail Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010904

Read more less

Adjustable Mid Mount Rod Holder Aluminum 1-1/4" or 1-5/16" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1-1/4" or 1-5/6" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Inches): 10" Finish: Polished Diameter (Inches): 1-1/4" Construction: Aluminum Mounting Style: Rail Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010874

Read more less

Adjustable Mid Mount Rod Holder Aluminum 7/8" or 1" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 7/8" or 1" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Inches): 10" Finish: Polished Diameter (Inches): 7/8" Construction: Aluminum Mounting Style: Rail Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010867

Read more less

Aluminum Vertical Clamp-On Rod Holder 1-2/3" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10 Finish: Powder Coat Diameter (Inches): 1-21/32 Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010638

Read more less

Aluminum Horizontal Clamp-On Rod Holder OD - White Powder Coated with SleeveC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Horizontal Fits rails with 1.66" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-5/16" Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010621

Read more less

Aluminum Vertical Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10 Finish: Powder Coat Diameter (Inches): 1-5/16 Construction: Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010614

Read more less

Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10 Finish: Powder Coat Diameter (Inches): 1-5/16 Construction: Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010607

Read more less

Side Angle "L" Bracket - Pair - Galvanized7 ga, 1/2” shaft hole, 3/8” mounting hole. Sold in pairs.

Read more less

Wobble Roller 4-3/4"ID with Bushing Steel Plate BlackFeatures: Diameter: 4-3/8" Width: 4-3/8" Shaft: 3/4"

Read more less

Wobble Roller Retainer Ring - Zinc PlatedUsed by many trailer manufacturers to secure wobble rollers onto their individual shafts. Zinc plated. Two retainer rings and two 1-1/8" washers per blister package.

Read more less

Package Roller Shaft 1/2" x 12-3/4" with Cap Nuts - ZincRoller shafts blister packed each with two cap nuts.Features: Length: 12-3/4" Max Grip: 12.190"

Read more less

Package Roller Shaft 1/2" x 6-1/4" with Cap Nuts - ZincRoller shafts blister packed each with two cap nuts.Features: Length: 6-1/4" Max Grip: 5.690"

Read more less

Package Roller Shaft 1/2" x 5-1/4" with Cap Nuts - ZincRoller shafts blister packed each with two cap nuts.Features: Length: 5-1/4" Max Grip: 4.690"

Read more less

Spool Roller 5" - 5/8" ID - Gold TPR with Bushing White SolidFeatures: Fits standard brackets and shaft sizes Natural rubber 2-7/8" Diameter 4-7/8" Width Gold TPR 5/8" Shaft

Read more less

Cap Nut - 5/8" 8 Pieces ZincCap nuts are hammered on each end of roller shafts to create a long lasting solid connection.Features: Zinc plated 5/8" 8 per package

Read more less

Cap Nut - 1/2" 8 Pieces ZincCap nuts are hammered on each end of roller shafts to create a long lasting solid connection.Features: Zinc plated 1/2" 8 per package

Read more less

Bow Roller - Yellow PVC - 8"Durable thermo plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.

Read more less

Y-Stop 3" x 3" - 1/2" ID Yellow PVCFeatures: 1/2" ID Color: Yellow PVC Y-Stop 3" x 3"

Read more less

Bow Roller - Yellow PVC - 4" x 1/2" IDDurable thermo plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. 2 sizes to fit bow stands with a 3” wide or 4” wide center roller bracket.

Read more less

Bow Roller - Yellow PVC - 3" x 1/2" IDDurable thermo plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. 2 sizes to fit bow stands with a 3” wide or 4” wide center roller bracket. Features: Yellow PVC 3" x 1/2" ID

Read more less

Chrome Acorn Wheel Nuts - 1/2"-20The most commonly used wheel mounting hardware.Packaged 5 per blister pack.

Read more less

Roller Bunk Mounting Bracket - 11"Perfect for use under roller bunks when the bunks need to be raised up off the frame.  Adjustable 11 ga top swivel bracket allows bunks to tilt to the shape of the hull. Features: 11” tall 1/2” swivel bolt included 7/16” hole for mounting to roller bunks

Read more less

Vertical 90° Bunk Bracket - 5" x 6" - Aluminum5” wide and 1/4” thick these heavy duty vertical bunk brackets are strong enough to mount large bunk boards to carry larger boats. Sold individually.

Read more less

Vertical 90° Bunk Bracket - 5" x 10" - Aluminum5” wide and 1/4” thick these heavy duty vertical bunk brackets are strong enough to mount large bunk boards to carry larger boats. Sold individually.

Read more less

Vertical 90° Bunk Bracket - 5" x 8" - Aluminum5” wide and 1/4” thick these heavy duty vertical bunk brackets are strong enough to mount large bunk boards to carry larger boats. Sold individually.

Read more less

Outboard Motor Dolly - 250lb. - RedMade from 14 gauge powder coated steel with a weather resistant synthetic wood mounting block this outbord motor dolly makes it easy to transport and hold your motor weighing up to 250 lbs. 8” wheels and 4" casters with an overall height of 45”, enough to fit a long shaft outboard motor. This outboard motor dolly folds flat to easy storage when not in use. Some assembly required.

Read more less

Double U-Bolt Bolster Bracket - 8-3/4"Mounting bunk boards using double U-bolt bolster brackets provides the most rigid bolt-on bracket mounting possible. Made from heavy 7 ga galvanized steel, these brackets are 4” wide with slots that are 1/2” wide spaced 1-3/4” apart with a top hole diameter of 1/2”.

Read more less

Pontoon Bolster Bracket - 15-3/4" x 2"Pontoon bolster brackets support bunkboards in a shallow V cradle configuration that best suits pontoon hulls. Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat. A bracket should be installed at each frame cross member for maximum support and load capacity.

Read more less

Bow Roller - Black - 4" Diameter - 3-3/4"W - 1/2" IDBlack natural rubber rollers are original equipment on many trailers. Fits standard brackets and shaft sizes.Features: Black natural rubber 4" Diameter 3-3/4" wide 1/2" shaft

Read more less

Ribbed Roller Replacement Kit - 4-Pack - BlueReplace your worn ribbed rollers with this ribbed roller kit. Rollers fit 1 1/8" shaft or 3/4" shaft using included Delrin® bushings.Features: Blue TPR Zinc plated washers & clips Kit includes: Four 5" diameter x 3" wide ribbed rollers to fit 1-1/8" shaftWith polypropylene hubs Four Delrin® bushings to fit rollers to 3/4" shaft Four 1-1/8" washers Four 3/4" washers Four retainer rings

Read more less

60" Post Guide-On With Unlighted Posts These Post Guide-Ons allow you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp.Features: Mounting hardware included Sold in pairs Adjusts out to 19" each side Fits frames up to 3" W x 4-1/4" H 1-1/2" square, 16 gauge pre-galvanized steel uprights 39" high 2-3/8" diameter white PVC posts. Stands 60" above the trailer frame with white post caps. Made in the USA Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized The galvanized coating is very thin (0.45 oz. on each side) WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less