FREE SHIPPING ON ORDERS OVER $100.00 Dollars!

  • Clipper Wireless Wind System Complete w/Display [CL-WWS]

    Clipper Clipper Wireless Wind System Complete w/Display [CL-WWS]

    Wireless Masthead & Data BoxThe mast head transmitter is completely wireless and is supplied with a base unit, which is powered by the vessel's 12Vsupply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to any compatible NMEA display unit. Wireless wind speed and direction data to any compatible NMEA display The masthead transmitter requires only occasional bright daylight falling on the solar panel to top up its internal battery. It will operate for 2000 hours without further solar charging from its fu lly charged battery. Easy insta ll ation with mast in place no wires to run down Simple masthead alignment through base unit Light weight - 190 grams Specifications: Sleep time > 15,000 Hours * Operating time > 2,000 Hours * Charging time < 150 Hours of bright daylight * Fully charged with no further daylightNMEA 0183 4800 Baud0/P Level 0 to 12 voltfrom 220 ohm source resistance.NMEA data sentence MWVSupply voltage 6 to 16 volts. (Nominal 12 volts)Supply current 17mAFuse 1 Amp.DisplayWind speed and direction data to any compatible NMEA deviceThe Clipper Wind Repeater disp lay is presented in the industry standard 11Omm square case. It boasts an exceptionally large and clear display with 60 segments for full 360 degree direction indication.Display Unit Spcifications Supply voltage Nomina l12V DC NMEA 0183 input sentence MWV 9 levels of display backlighting Display case size 110 x 11Omm Depth behind panel 30mm Consumption, 1OmA+ (1OmA for display illumination max) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Shape: Square Instrument Function: Wind Box Dimensions: 5"H x 7"W x 16"L WT: 3.85 lbs UPC: 799439091818 Owner's Manual (pdf)

    $599.00 $563.99

  • Clipper NMEA 2000 Compliant Wind System [CANBUS W SYS]

    Clipper Clipper NMEA 2000 Compliant Wind System [CANBUS W SYS]

    Clipper NMEA 2000 Compliant Wind SystemThe Wind System consists of the version 2 mast head sensor and a small translator box, the box is fitted with a ‘micro-c’ connector which plugs directly into an existing NMEA 2000 network.NMEA 2000 Compliant Wind system is supplied complete with masthead unit, 20 meters of cable, mast head unit mounting hardware and the translator box with Micro C connector cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

    $429.00 $386.99

  • Clipper Wind System V2 w/Masthead Transducer & Cover [CL-W]

    Clipper Clipper Wind System V2 w/Masthead Transducer & Cover [CL-W]

    The Clipper Wind system shares the same 110mm square case as its sister instruments in the Clipper range. the display is exceptionally large and clear, with 60 segments for full 360 degree direction indication. Windspeed is shown in knots, M.P.H. or Metres/second. The pointer style is selectable, from the single segment shown above, to multi segments for greater clarity or a 'windex' style indicator. The Masthead unit is well proven and supplied with 20 metres of cable as standard.Technical Specifications: Supply voltage Nominal 12v DC Consumption, 50mA+ (25mA for display illumination max) Keypad adjustment of masthead alignment 7 levels of display backlighting Display case size 110 x 110 mm Depth behind panel 30mm Anemometer head 210 x 140mm 5 and 20 meter extension cables available Compatible with Standard Horizon CP180 and CP300 plotters This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Instrument Function: Wind Box Dimensions: 6"H x 11"W x 21"L WT: 5 lbs UPC: 797776914647 Owner's Manual (pdf)Brochure (pdf)

    $429.00 $376.99

  • Clipper Duet Instrument Depth Speed Log w/Transducer [CL-DS]

    Clipper Clipper Duet Instrument Depth Speed Log w/Transducer [CL-DS]

    Best selling combined Speed/Distance Log and Echo Sounder in standard 110mm square size. Suitable for open cockpit mounting. Technical Specifications: Depth Sounder in feet and meters Shallow alarm and keel offset Complete with well proven Transducers Speed in MPH, Knots and Km/H Trip and Total Distance in Miles, Nautical Miles, and Kilometers Speed Limit Alarm Face Cover includedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Instrument Function: Multifunction Box Dimensions: 4"H x 8"W x 10"L WT: 2.95 lbs UPC: 609722871143 Owner's Manual (pdf)Brochure (pdf)

    $369.00 $323.99

  • Clipper Depth Instrument w/Thru Hull Transducer & Cover [CL-D]

    Clipper Clipper Depth Instrument w/Thru Hull Transducer & Cover [CL-D]

    If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting.Technical Specifications: 40mm high digits Depth below transducer/below keel/below surface Deep and shallow alarms (audible and visual) User selectable feet or metres Intelligent gain control & manual override Selectable display rate and depth averaging rate Depth trend indicator High transmit power All settings stored in non-volatile memory Tactile keypad Complete with weather cover and transducer Consumption 20mA +25Ma for backlight (max)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Instrument Function: Depth Box Dimensions: 4"H x 8"W x 10"L WT: 2.1 lbs UPC: 609722871150 Brochure (pdf)

    $309.00 $242.99

  • Clipper Supernova Combi LED Tricolor Masthead Anchor Light [CL-CTC]

    Clipper Clipper Supernova Combi LED Tricolor Masthead Anchor Light [CL-CTC]

    Supernova Combi Tri and Anchor L.E.D MastlightSupernova lights use high efficiency LEDs ensuring long life and low power consumption. A tough polycarbonate shell protects Supernova from the elements while a Gore-Tex membrane vent ensures equalization of pressure on the seals.A simple two wire connection powers the Combi light. Connecting the red wire to positive and the black wire to negative will illuminate the tricolor light. Reversing the connections will illuminate the anchor light.A rotary switch is supplied with the Combi light to facilitate the supply reversal.In the central position both lights are off. Switching clockwise or anticlockwise selects the required lighting configuration.If a toggle or rocker switch is preferred, to match existing switches, then a centreoff two pole changeover switch can be used.Technical Specifications: Supply voltage - 10 to 20 volts (For full brightness) Supply current - 200 mA @ 12 volts(Typically 90% less than equivalent incandescent lamps) Night time visibility - 2 nautical miles minimum(25 degrees above and below the centerline) Waterproofness - IP65 (Water jets), IP67 (Submersion) Dimensions - 91 mm diameter x 133 mm Height (including mounting) Configuration: Anchor light version - 360 degrees white;Tri-color version - 112.5 degrees Red, 112.5 degrees green, 135 degrees white Supernova navigation lights are intended for use on vessels up to 12 metres in length. They comply with CE generic EMC standards and are waterproof to IP65 and IP67. There is no specific EU standard for LED navigation lights. Supernova lights do not have any national approvals.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

    $299.00 $236.99

  • Clipper Speed Log Instrument w/Transducer & Cover [CL-S]

    Clipper Clipper Speed Log Instrument w/Transducer & Cover [CL-S]

    If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting. As with all Nasa instruments - they are excellent value too. Technical Specifications: 40mm high characters Speed (Knots/m.p.h.) Trip Distance (N.Miles / Miles) Total Distance (N.Miles / Miles) Trend indicator shows acceleration / deceleration Selectable speed averaging Tactile keypad Complete with weather cover and paddlewheel unitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Instrument Function: Speed Box Dimensions: 4"H x 8"W x 10"L WT: 2.1 lbs UPC: 609722871167 Owner's Manual (pdf)

    $289.00 $231.99

  • Clipper Bluetooth Battery Monitor [BM-BT]

    Clipper Clipper Bluetooth Battery Monitor [BM-BT]

    Bluetooth Battery MonitorWhen you need a battery monitor but don't have space for the display or routing thecables would be a nightmare, there is now a solution. The BM-1(BT) will monitor yourboat or caravan's lead-acid batteries and transmit the data directly to your mobile phone,or tablet, wirelessly by bluetooth.A simple Android app, freely available from the nasamarine.com website or Google PlayStore, (requires Android V4.3 or later) shows your service battery voltage, current flowingin or out, state of charge and time to charge or discharge the battery. An audible alarmwarns if the battery level gets dangerously low. It will also show the starter batteryvoltage. For apple users a more sophisticated app, with additional features can bepurchased from the Apple app store. Compatible with iPhone, iPad and iPod touch.Offers Apple Watch App for iPhone. (Requires iOS 9.0 or later)The monitor, which draws a meagre 2 mA, is supplied with a 100 amp shunt and a premadecable assembly to simplify connection to your service battery.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    $189.00 $116.99

  • Clipper Supernova Tricolor Navigation Light [SUPER-TRI]

    Clipper Clipper Supernova Tricolor Navigation Light [SUPER-TRI]

    Supernova Tricolor Navigation LightSupernova lights use high efficiency LEDs ensuring long life and low power consumption. A tough polycarbonate shell protects Supernova from the elements while a Gore-Tex membrane vent ensures equalization of pressure on the seals.Specifications: Supply voltage – 10V to 20V (For full brightness) Supply current – 200mA @ 12V (Typically 90% less than equivalent incandescent lamp) Night time visibility – 2 nautical miles minimum (25° above and below the centerline) Waterproof Rating – IP67 (Submersion) Dimensions – 91mm diameter x 113mm Height (including mounting) Configuration:Tri-color version – 112.5 degrees red, 112.5 degrees green,135 degrees whiteThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Lens Color: White/Red/Green Visible Range (Miles): 2nm Housing: Black Voltage - Input Range (Volts): 12v LED: Yes Box Dimensions: 4"H x 7"W x 8"L WT: 0.8 lbs UPC: 609722871310

    $149.00 $105.99

  • Clipper Speed Log Paddle Wheel Unit Complete with Thru Hull Fitting [CLZ-PWU]

    Clipper Clipper Speed Log Paddle Wheel Unit Complete with Thru Hull Fitting [CLZ-PWU]

    Complete Paddle Wheel Unit Spare complete log impellor unit with skin fitting and 7 meter cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    $69.00 $61.99

  • Clipper Wind Vane Kit Wireless Tactical f/Version 2 - 3 Wire Units [WINDVNE-WT]

    Clipper Clipper Wind Vane Kit Wireless Tactical f/Version 2 - 3 Wire Units [WINDVNE-WT]

    Wind Vane Kit Wireless Tactical for Version 2 - 3 Wire UnitsSpare wind vane assembly with fixings and illustrated fitting instructionsFor Clipper, Target, Cruiser and Wireless, Tactical masthead units.Clipper / Target / Cruiser Version 2 – three wire / Wireless / Tactical mast unit. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    $39.00 $23.99

  • Clipper Instrument Weather Cover [CLZ-WXC]

    Clipper Clipper Instrument Weather Cover [CLZ-WXC]

    Protect your Clipper instrument from the elements with this spare weather cover.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    $19.00 $9.99

Clipper
Footer image

© 2025 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account