Relay 24V, 150A with ResistorThis is a 24V automotive-rated relay/industry standard drop-in replacement for Tyco/Amp. The relay switch carries high-amp electrical currents in high ambient temperatures/wet environments.Applications: Resistor circuit protection ensures flyback voltage does not affect control signal circuitry. A great option for sensitive electrical systems. High intermittent amp rating of 300 amps for up to 3 seconds, making this relay great for temporary high-equipment start-up amp draw applications. Automotive-grade connectors ensure moisture and dust intrusion are kept from the control circuitry. The high-temperature rating of 125C/257F makes this a great relay for high-temperature installation environments like engine bays and other low-ventilation spaces. Features: Bullet-proof Construction - Robust automotive grade relay with IP54 ingress protection and reinforced mounting tabs ensure secure mounting Dual mounting holes on either side for easy mounting with ¼-20”/M6 1.25 bolts or screws up to #14 screw Incorporate the highest quality materials for superior performance and have a high 100,000 electrical switching cycle capacity Enhanced vibration and shock protection ensures enhanced reliability, a long service life, and the operational readiness of the electrical system Specifications: Intermittent Current @ 3 SEC (Amps): 300 Ambient Temp. Rating (Low/High) (Celsius): -40/125 C Max Continuous Current (Amps): 180 @23 degrees C Electrical Endurance Rating (Cycles): 1,000,000 On State Current Draw @ 24 VDC: 163 mA Operating Voltage Range: 17.6-32VDC Focal Features:Sealed HousingIP67-rated housing keeps out moisture and ensures long-term reliability.Reinforced MountingRobust mounting tabs with strengthening gussets ensure the relay stays mounted securely, even through vibration, heat, and wire tension.Terminal ProtectionShielded dual M6x1.0 terminals ensure protection from accidental contact shorts.Delphi Metripak ConnectorAutomotive-grade sealed control wire connectors keep moisture out of the control circuit.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

VE. Direct - 5M Cable (1 Side Right Angle Connector)Features: Cable Length: 5M 1 Side Right Angle Connector Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Temperature Sensor with 12" ExtensionThe optional temperature sensor senses temperatures over 120°F.Features:Includes 12" ExtensionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Cables Box Dimensions: 1"H x 3"W x 6"L WT: 0.05 lbs Quick Guide (pdf)Owner's Manual (pdf)

Read more less

VE.Direct Cable - 1.8MThe Victron VE.Direct Cable is used to link Victron Energy devices that are VE.Direct equipped. The connection between the devices is essential for the communication of information. This particular cable is 1.8 meters in length and has two straight ends for connecting purposes. Quick Guide (pdf)

Read more less

GX LTE 4G-A Cellular Modem for GX Devices - North America OnlyThe GX LTE 4G is an accessory for GX devices. It is a cellular modem that supports 2G, 3G, and 4G technologies. It provides mobile internet for the system and a connection to the Victron Remote Management (VRM) portal.Built-in GPS ReceiverThe GX LTE 4G includes a built-in GPS receiver. When the optional active GPS antenna is installed, the system can be tracked as well as geo-fenced on the VRM Portal.The required accessory part number is GSM900200100 - Active GPS Antenna for GX GSM.GX CompatibilityThe GX LTE 4G can be used with any of the GX devices and requires Venus OS v2.60 or newer to be installed on the GX device.SIM CardIt requires a SIM card in the Mini-SIM format.When to Use a Mobile Router InsteadThe GX LTE 4G provides an internet connection for the GX device only. There is no option to share the internet with laptops, phones, or other devices. For installations where more devices need internet, such as a yacht or RV, consider installing a mobile router instead.Antennas and AccessoriesA small indoor LTE antenna is included. Optionally, Victron sells an outdoor LTE antenna, which increases the range.Part number GSM900100400 - Outdoor 4G GSM Antenna.Specifications: Region: For North America Used Module: SIMCom, SIM7600A Supported LTE Bands: 2, 4, 12 Supply Voltage Range: 8 - 70VDC Power Draw: 2.5W while 2G/3G/4G data transfer / <1.0W in idle mode / +0.4W if GPS is enabled Operating Temperature Range: -40 +50°C (-40 - 120°F) Power Cable (Included): 1.4m cable with inline fuse holder, terminal block, and 10mm ring terminals Inline Fuse (included): T3.15A250V Communication Specifications: USB Communication Port: Fixed 1.0m cable with USB-A connector (connects to the GX device) LTE Antenna Connector: Type SMA Female (optional 4G outdoor antenna GSM900100400) GPS Antenna Connector: Type SMA Female (optional GPS antenna GSM900200100) GNSS: GPS/Beidou/GLONASS/GALILEO/QZSS SIM Card: Regular Mini SIM (supports both 1.8V and 3V) Data Transmission (max. Download/Upload) LTE Cat-1: 10 Mbps / 5 Mbps Data Transmission (max. Download/Upload) 3G (HSPA+): 42 Mbps / 5.76 Mbps Data Transmission (max. Download/Upload) 2G (EDGE): 236.8 Kbps / 236.8 Kbps Data Transmission (max. Download/Upload) 2G (GPRS): 85.6 Kbps / 85.6 Kbps Status Indicator: Blue LED Installation & Dimensions: Dimensions (l x w x h): 106 × 42.5 × 22mm Weight: 0.08kg (0.177lbs) Wire Gauge (power cable): 0.5..1.5mm2 / AWG 28..16 or use supplied power cable Recommended Fuse Size: 500mA @ 12V / 250mA @ 24V / 100mA @ 48V or use supplied inline fuse In the Box: GX LTE 4G (with integrated USB cable) GSM 2G/3G/4G mini-rod antenna (for indoor use) DC power cable (with inline fuse and terminal block) Standrads: Safety: EN 60335-1 / EN 60335-2-29 / EN 62368-1 Emission / Immunity: ECE R10-5 QM: EN 9001:2015 Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

GX Touch 70 Surface Mount Display - 7"The GX Touch 70 is a display accessory for our Cerbo GX. The seven-inch touch screen display gives an instant overview of your system and allows you to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, their super slim waterproof design, top-mountable setup, and simple installation bring a lot of flexibility when creating a crisp and clean dashboard.Simply MountedThe GX Touch is optimized to more than meet the standards of installer professionals. The screen is simply bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the ColorControl GX) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard. CompanionsThe GX Touch is a companion to the Cerbo GX, the all-new communication center allows you to always have perfect control over your system from wherever you are and maximizes its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the GX Touch, an MFD, or our VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Phoenix Inverter ControlThis panel is intended for VE.BUS Phoenix Inverters equipped with a UTP remote monitoring and control socket. It can also be used on a MultiPlus Inverter/Charger when an automatic transfer switch but no charger function is desired. The brightness of the LEDs is automatically reduced during night time. A UTP cable is required to connect the panel to the inverter. Only for models: 12/1200, 12/1600, 12/2000, 12/3000, 12/5000, 24/1200, 24/1600, 24/2000, 24/3000, 24/5000, 48/3000 and 48/5000.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

TILE USB-C Interior Charging Socket - 12/24V - Stainless Steel BezelTILE Series offers sleek, high-performance charging solutions designed specifically for marine interiors. These chargers blend seamlessly into luxury marine environments. Featuring a compact 40mm (1.57”) footprint and requiring just a 29mm (1.14”) hole saw for easy installation, the TILE Series combines functionality and style, making it the ideal choice for modernizing your vessel’s interior. Enhance your boat’s space with this practical, sophisticated solution for charging your everyday devices.Tile USB is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops and large tablets, phones, and any other USB-C-powered devices onboard.USB–C output60W max on 24V system, 36W max on 12V systemUniversalUniversal fit for any USB-C connectors. Fast charge (60W max) up to 2 devices at a time.Important informationTo maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12 or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops.WARNINGTILE USB products are designed for interior use only. Do not install in locations where water exposure is possible, as this may lead to product failure.Features: 12V & 24V  USB-A and USB-C Ultra-low profile Front fit Tiny footprint Available in 316 stainless steel or matte black Conformal coated electronics, protected against moisture Modernize your boat's interiors Specifications: Input Voltage Range: 10-32V DC (12/24V system) Input current max: Max 6A (10A fuse recommended)  Output (Type C): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Standby Power: 0.01W Certification: CE, FCC, UKCA, C-Tick, ROHS, WEE

Read more less

Low Profile Group 27 Adjustable Battery TrayThis battery tray is made of heavy-duty, non-corrosive black plastic. The tray includes an adjustable-height crossbar and two retaining bolts.Features: Meets ABYC Standard E-10 and U.S. Coast Guard requirements Patented design Install with #10 fasteners Specifications: Battery Series: 27/27M Inside Dimensions: 12-5/8" x 7-1/4" x 8-1/2" Quick Guide (pdf)

Read more less

1010Features: Moisture proof sealing ring around the shaft to keep out spray and make it seat firmly in the outlet "ON" indicating LED Strain relief Built-in 10 Amp fuse Designed to withstand the rigors of wet environments and constant vibration Large contact surfaces for good electrical connection Twist lock system-plug locks securely into socket Internal strain relief and cord seal Nickel plated copper alloy used for all current carrying components Front panel, rear panel, or surface mount WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

XD Series Dual Flex 2 (ACR-Mech Only) with Knobs - Flying WiresFeatures Replaces Two Individual High Amp Relays with One Compact Module reducing space significantly, eliminating the cost of external link cable connections, eliminating the risk of link cable connections vibrating loose, and providing clear unambiguous awareness of how to operate manual controls and what state the manual controls have forced the relay into.. Designed to Replicate Common Multi-Battery Switching and Charge Management Functions:  Common dual battery load switching via the outer relays and a central automatic charging relay to share charge current is easily implemented. Multiple Automatic Charging Relay (ACR) Into One Device: For 2-3 Battery Systems that require 1 or 2 ACRs, a single three-relay ACR provides a drastic improvement in off-state quiescent current draw, space used, and reduces unnecessary interconnection cables. Expandable with Link and Cross-Link Busbars to Additional Dual, Triple, or Single XD Relays: Supports 2 or 3 battery systems with standard busbar interconnect accessories. Bullet-proof Construction: Sealed to IP67/IP6K9K, high-temperature electronics and materials allow mounting anywhere. Stainless steel cable lug studs. Large mounting holes accept 1/4-20 / M6 attachment hardware. Intuitive Manual Control option simplifies operation and awareness of the state of manual override and whether the device is being left in a locked off or locked on state (not available on competitive solutions) Simple Programmability via simple dip switches allows each relay function significant flexibility for OEMs and installers.  35-75% Reduction in Mounting Space & Product Weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts. Plug & Play Compatible with Legacy Competitor Products:   Single, dual, and triple relays options available with DTM/ATM connectors pin for pin compatible with ML Series Bi-stable Relays. 90-95% Less Off-State Current: Compared to competitive products and system solutions that require multiple devices for similar functionality Specifications: Total Continuous Current Amps: 500 Max Cranking Current (Amps): 1500 Mechanical Switching Life: 1,000,000 Cycles Voltage Range (VDC): 8-36 Off-State Current Draw (mA): 1.3 State Change Current: 5A @ 12 VDC; 3A @ 24 VDC Focal Features:LED Status DisplayEasy to see front facing LED indicator provides visual device status, remote LED replicates local on-device LED3-Position Manual OverrideForce each individual relay Open or Closed and optionally leave knob in either position to lock relay in either condition. 40 Circuit Label Sheet IncludedConvenient recesses for included weatherproof label set makes circuit and relay identification easy. Blank labels for custom applications.Protective Cover IncludedProtects terminal studs and cable terminal edges from inadvertent shorts to each other or ground.Stainless HardwareCorrosion is no issue with quality stainless steel studs and self locking flanged nuts.ProgrammableVia dip switches located under protective cover. An easy to use configuration guide on reverse make custom settings a breeze to configure for a wide variety of applications.Smaller FootprintXD Relays offers high Amp rating in a smaller package than competitive solutions, reducing install space requirements to a minimum.Integrated VentHigh quality Gortex vent regulates internal device pressure to eliminate moisture entry across seals and ensure long product life in harsh environments. Brochure (pdf)

Read more less

XD Series Triple Flex 2 Mechanical Switch-ACR-Mechanical Switch with Knobs & DTM ConnectorThe Egis relay replaces three individual high-amp relays with one compact module, reducing space significantly, eliminating the cost of external link cable connections, eliminating the risk of link cable connections vibrating loose, and providing clear, unambiguous awareness of how to operate manual controls and what state the manual controls have forced the relay into.Applications:  Designed to replace common multi-battery mechanical switching and charge management functions - common dual battery load switching via the outer relays and a central automatic charging relay to share charge current are easily implemented Expandable with link and cross-link busbars to additional dual, triple, or single XD relays - supports 3 or 4 battery systems with standard busbar interconnect accessories. Features: Bullet-proof construction - sealed to IP67/IP6K9K, high temperature electronics and materials allow mounting anywhere; stainless steel cable lug studs; large mounting holes accept 1/4-20 / M6 attachment hardware Intuitive manual control option simplifies operation and increases awareness of the state of the manual override and whether the device is being left in a locked-off or locked-on state (not available on competitive solutions) Simple programming via dip switches gives each relay function significant flexibility for OEMs and installers. 35-75% reduction in mounting space and product weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts Plug and play compatible with legacy competitor products - single, dual, and triple relay options are available with DTM/ATM connector pins compatible with ML Series bi-stable relays (This relay has a DTM connector) 90-95% less off-state current compared to competitive products and system solutions that require multiple devices for similar functionality Specifications: Total Continuous Current Amps: 500 Max Cranking Current (Amps): 1500 Mechanical Switching Life: 1,000,000 Cycles Voltage Range (VDC): 8-36 Off-State Current Draw (mA): 1.3 State Change Current: 5A @ 12 VDC; 3A @ 24 VDC Focal Features:Led Status DisplayThe easy-to-see front-facing LED indicator provides visual device status, and the remote LED replicates the local on-device LED. 3-Position Manual overrideForce each relay open or closed, and optionally leave the knob in either position to lock the relay in either condition. 40 Circuit Label Sheet IncludedConvenient recesses for the included weatherproof label set make circuit and relay identification easy. Blank labels for custom applications. Protective Cover includedProtects terminal studs and cable terminal edges from inadvertent shorts to each other or ground. Stainless Hardware Corrosion is no issue with quality stainless steel studs and self-locking flanged nuts.ProgrammableVia dip switches located under the protective cover. An easy-to-use configuration guide on the reverse makes custom settings a breeze to configure for a wide variety of applications. Smaller FootprintXD relays offer a high amp rating in a smaller package than competitive solutions, reducing installation space requirements to a minimum. Integrated VentHigh-quality Gortex vents regulate internal device pressure to eliminate moisture entry across seals and ensure long product life in harsh environments.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

MareLube Valve General Purpose Lubricant - 16 oz.Marelube is Forespar's new family of three specifically formulated synthetic lubricants designed for various uses around your boat. Each contains PTFE and they work equally well in fresh or salt water. Marelube Valve Lubricant is an advanced lubrication formula designed to keep valve seals and balls working smoothly in marine plumbing systems. It is a clear, non-staining and nontoxic lube that is perfect for traditional bronze fittings, as well as all composite plumbing fixtures like Forespar's Marelon parts. Features: General Purpose PTFE Synthetic Lubrication Clear, Non-Staining and Non-Toxic Compatible With Bronze or Marelon Components Keeps Seals and Balls Working Smoothly Specifications: Type: Grease Box Dimensions: 2"H x 3"W x 8"L WT: 1 lbs UPC: 028026190772

Read more less

DC Battery Cables (4G) + Fuse L-KitPre-terminated DC battery cables and fuse block kit for a fast and easy installation between your inverter and battery.Specifications: 1400-2300W Inverters 8’ foot 2-0 Cables + Fuse L-Kit Specifications: Type: Cables Box Dimensions: 4"H x 10"W x 13"L WT: 8.8 lbs UPC: 715535915346

Read more less

DC Battery Cables (4G) + Fuse M-KitPre-terminated DC battery cables and fuse block kit for a fast and easy installation between your inverter and battery.Specifications: 900-1300W Inverters 8’ foot 2AWG Cables + Fuse M-Kit Specifications: Type: Cables Box Dimensions: 4"H x 10"W x 13"L WT: 5 lbs UPC: 715535915384

Read more less

DC Battery Cables (4G) + Fuse S-KitPre-terminated DC battery cables and fuse block kit for a fast and easy installation between your inverter and battery.Specifications: 600-800W Inverters 8’ foot 4AWG Cables + Fuse S-Kit Specifications: Type: Cables Box Dimensions: 4"H x 10"W x 13"L WT: 3.5 lbs UPC: 715535915469

Read more less

DC Battery Cables (4G) + Fuse XL-KitPre-terminated DC battery cables and fuse block kit for a fast and easy installation between your inverter and battery.Specifications: 2400-3000W Inverters 8’ foot 4-0 Cables + Fuse XL-Kit Specifications: Type: Cables Box Dimensions: 6"H x 11"W x 15"L WT: 15 lbs UPC: 715535915421

Read more less

Alpha Pro IIIAdvanced 3-step charge regulator for standard and high performance alternatorsThe propulsion engine of your boat or vehicles may be used to quickly charge your service batteries, either while cruising or taking a break. The advanced and powerful Alpha Pro III ensures fast and safe charging, protecting both the engine and the batteries. Building on 10 years of experience, the Alpha Pro III features a modernized look, higher power and improved ease of use.The Alpha Pro III measures the temperature and the voltage of your batteries to prevent overcharging, keeping them in perfect condition. It also monitors the engine load, thus reducing sound variations, wear and tear. The smart ‘keep alive’ feature solves a common problem causing unreliable tachometer readings. Via MasterBus, it communicates RPM, alternator status and charge status to create intelligent power systems. Pull the max out of your alternatorThe alternator that comes with the engine is not optimally suited for charging service batteries. Designed for low cost and short charge cycles, it charges at a slow pace and is easily overheated. Replacing the standard regulator* with the Alpha Pro III optimizes this charging process, protects against overheating and overcharging and extends the lifetime of your batteries. (* not allowed on Euro 5/6 engines)Super charge your systemFor superfast charging at low RPM, Mastervolt recommends to combine the Alpha Pro III with a high performance alternator such as the reputable Alpha series. With 20 amps of field current capability, the Alpha Pro is the only 3-step regulator in the market capable of controlling alternators with outputs up to 400 A!Alpha Pro III: Fast charging, anytime, anywhere. Features: Transforms every alternator into a full temperature controlled 3-step charger. Reduces run time, saves fuel, reduces noise and emissions. Protects from overcharging and extends battery life. Balances engine load, reducing RPM variations. Compatible with standard and high performance alternators, incl. 200 A 400 A models. Integrated ‘keep alive’ feature for reliable tachometer readings. Suitable for every battery type, including Lithium Ion. Suitable for 12 V and 24 V system voltages. Masterbus compatible: simplifies wiring, saves space and weight, and creates optimal cooperation between Mastervolt products. Applications:Applications range from improving the performance of a standard alternator in a vehicle or boat, to generator replacement, when combined with a high performance alternator. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Voltage Regulator for Mercury Outboard EnginesThis voltage regulator will fit 1995-2005 (25-40HP – 2 Cyl.) 1987-2007 (45-90HP – 3 Cyl.) 1989-2006 (90-125HP– 4 Cyl.) 1992-2000 (150-225HP – 6 Cyl.) engines.Replaces: Mercury 815279A2 Mercury 8M0084173 Mercury 883072T Mercury 854515T1 Mercury 854515 Mercury 854515 Mercury 8301792 Mercury 8152795 Mercury 8152795 Mercury 8152793 Mercury 830179T Mercury 856748 Mercury 815279A2 *ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

XD Series Single Flex 2 ACR-Relay - DTM ConnectorThis Egis relay provides a 35-75% reduction in mounting space and product weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts. Also, this relay eliminates dead-start batteries by sharing charging on either of two batteries and isolating batteries when no charge sources are present.Applications:  Supports multiple engines or independent charge systems by incorporating two independent start or engine isolation inputs to allow isolation of charge sources when both are active to maximize charging performance.  Expandable with link and cross-link busbars to additional dual, triple, or single XD relays; supports 2 or 3 battery systems with standard busbar interconnect accessories Features: Bullet-proof construction, sealed to IP67/IP6K9K, and high temperature electronics and materials allow mounting anywhere; Stainless steel cable lug studs; Large mounting holes accept 1/4-20 / M6 attachment hardware The intuitive manual control option simplifies operation and increases awareness of the state of the manual override and whether the device is being left in a locked-off or locked-on state (not available on competitive solutions) Simple programmability via simple dip switches allows each relay function significant flexibility for OEMs and installers Plug-and-play compatible with Legacy competitor products: Single, dual, and triple relay options are available with DTM/ATM connector pins for pin compatibility with ML Series bi-stable relays 90-95% less off-state current compared to competitive products and system solutions that require multiple devices for similar functionality Specifications: Total Continuous Current Amps: 500 Max Cranking Current (Amps): 1500 Mechanical Switching Life: 1,000,000 cycles Voltage Range (VDC): 8-36 Off-State Current Draw (mA): 1.3 State Change Current: 5A @ 12 VDC; 3A @ 24 VDC Focal Features:Led Status DisplayThe easy-to-see front-facing LED indicator provides visual device status, and the remote LED replicates the local on-device LED. 3-Position Manual OverrideForce each relay open or closed, and optionally leave the knob in either position to lock the relay in either condition. 40 Circuit Label Sheet IncludedConvenient recesses for the included weatherproof label set make circuit and relay identification easy. Blank labels for custom applications. Protective Cover IncludedProtects terminal studs and cable terminal edges from inadvertent shorts to each other or ground. Stainless Hardware Corrosion is no issue with quality stainless steel studs and self-locking flanged nuts.ProgrammableVia dip switches located under the protective cover. An easy-to-use configuration guide on the reverse makes custom settings a breeze to configure for a wide variety of applications. Smaller FootprintXD relays offer a high amp rating in a smaller package than competitive solutions, reducing installation space requirements to a minimum. Integrated VentHigh-quality Gortex vents regulate internal device pressure to eliminate moisture entry across seals and ensure long product life in harsh environments.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Remote Battery Temperature SensorSends precise information to the charger or charge controller, which automatically adjusts voltage to ensure full battery charge depending on the ambient temperature of your battery installation.

Read more less

400A Inverter Installation Kit f/3500W InverterSamlex’s Inverter Installation Kit contains a pair of heavy duty cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.Specifications:Input: 2500-3500 Watts / 5000-7000 WattsOutput: 12 V / 24 VAmps: 400 AmpsFuse: 400 AmpsWeight: 17.5 (lbs)Weight: 7.93 (kg)Dimensions: *comes with 10ft of cable x 2Warranty: 2 Year LimitedApplications:The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

ROKK 10W Waterproof Wireless Charger - HiddenThe IPX6 waterproof 12/24V Qi-certified phone waterproof wireless charging range enables charging in the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit.Working directly with 12/24V systems, Scanstrut ROKK Wireless is ideal for life on the move and perfect for sailing, powerboats, and RV.  Easy install, anywhere you need your phone - indoors or out.  No more wires! Exceeding the latest and highest standards of the Qi wireless protocol, ROKK Wireless is independently certified to deliver ultra-safe charging anywhere on board.Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps.Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments.With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions.Case Compatibility:ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm)Features: Installation is simple on any boat, RV, ATV, or outdoor location.  Sub-surface, hidden from view but always ready to charge.  Engineered to be installed under the surface, leaving the top surface uncluttered and perfect.  Compatible with all Qi Wirelessly charging electronics. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (W x H) - 3.93" (100mm) x .57" (14mm) In the Box: Charger Locking ring Mounting hardware Instruction manual  *Sold as an Individual Specifications: Type: Chargers Box Dimensions: 2"H x 5"W x 10"L WT: 0.4 lbs UPC: 5060114798045 Quick Guide (pdf)

Read more less

4367 Water Resistant USB Accessory Panel - 15A Circuit Breaker, 3x Blank AperturesEasy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options.Features: Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only Specifications: Positions: 1 Nominal Voltage: 12V DC

Read more less

GX Tank 140 Tank Monitoring for 4-20 MA, 1-10VDC Sensors - Monitors Up to 4 Sensors *Sensor Not IncludedThe GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for our range of GX system monitoring products, of which the Cerbo GX is the most commonly used model.Tank levels can be read out locally in the system, see screenshot, as well remotely through our VRM Portal.The GX Tank is compatible with current senders (4 to 20 mA) as well as voltage senders (0 to 10 V). The connection to the GX Device is via USB, which is also how the GX Tank is powered: no additional power wires are required.Tank sender wiring is kept as simple as possible: two of the four inputs provide a 24 V power supply, to power the sender. The other two channels do require an external power supply, and there is power in the terminal together with fused outputs to facilitate that.Upper and lower limits are configurable, to allow using senders that provide only part of the scale, for example, 0 to 5 V.To provide a stable reading, the readings are averaged damping. The damping can be configured between 1 and 60 seconds.Faulty sensors and wiring issues are detected: an alarm will be raised when values are out of range.For marine applications, the GX Device can transmit these tank levels on the NMEA 2000 network to be picked up by other displays such as an MFD.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

VE Direct Cable - 10MThe VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model.  Quick Guide (pdf)

Read more less

Flip Pro with Front Fit Bezel 12/24V Fast Charge Dual USB-A/C SocketUltra-fast USB charging for the next-generation boater. Flip Pro is designed for use with either a 12V or 24V input and features a 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection and the fastest charging for your device onboard.Ultra-fast USB charging for the next-generation boater. Flip Pro with a front bezel is designed for use with either a 12V or 24V input and features a 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection for any device and the fastest charging for your device onboard.Flip Pro with front bezel was manufactured as an adaption to the original SC-USB-F1 to offer flexibility to installation, as in some cases, it is not possible to gain access to behind panels. Therefore, the front fit bezel provides an alternative route for installation, allowing the option to fit the product from the front using screws.When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements. When charging, it quickly locks open to protect your cables when plugged in.Featuring a super compact footprint, Flip Pro is constructed from premium, marine-grade materials. and is IPX4 waterproof, making it completely washdown-ready.Flip Pro is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops via the USB-C port. It’s also 2x faster for charging large tablets and is designed to effortlessly charge both an iPad Pro & iPhone at the same time. The install cut-out matches those of standard USB sockets for easy retrofit or swap of an existing USB charger, allowing you to keep up with the heavier power draws of modern electronic devices.Universal: Universal fit for any USB-A or USB-C connectors. Fast charge (60W max) up to 2 devices at a time. Easy Install, using standard USB mounting hole - 29mm (1 1/8”) Washdown Proof:IPX4 waterproof with the cover closed.Marine Ready: Internal anti-corrosion protective coating UV resistant 316 stainless hinge and spring Electrical Information: Input voltage: 10-30V DC (12/24V System) Input current Max: 6A (10A fuse recommended)  Standby power draw: 0.01W USB – C output:  60W max on 24V system 36W max on 12V system USB – A output: 36W maxThe charge cable supplied with your device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast-charging laptops. What is USB-C? More powerful - Our USB-C has no problems charging even the largest iPad Pro at twice the speed as a USB-A. More Compact:The slim, oval shape is smaller than USB-A and is also symmetrical and reversible - no more having to flip the cable over to get it into the port!More Flexible:It’s fast becoming the universal connector/charge type on all devices, replacing the USB-A, USB-B, and Micro-USB. New devices are being launched with this charge option only e.g. iPhone 13.

Read more less

ROKK 10W Catch Waterproof Wireless Phone Charging MatCatch 10W is one of the most convenient ways to store and wirelessly charge your phone onboard indoors or out! Designed to install onto any flat surface, perfect for use on top of boat consoles.Place your phone onto the center of the charging mat and start wirelessly charging.The cleverly designed edging bumpers stop your phone from sliding out, and lets the mat Catch your phone from any angle!Constructed from our Closed Cell EVA foam, Catch offers excellent shock absorption and anti-vibration for your phone while being extremely hard-wearing, waterproof, and self-draining, stopping bacteria and mildew from building up. The catch is a part of our IPX6 waterproof 12/24V Qi-certified waterproof wireless charging range that enables wireless charging for the outdoor environment without phone charging cables.Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit.Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps.Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments.With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions.Case Compatibility:ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm)Features: Compatible with all Qi Wirelessly charging electronics. Place your phone onto the center of the charging mat and instantly start wirelessly charging. Constructed from our Closed Cell EVA foam, Catch offers excellent shock absorption and anti-vibration for your phone while being extremely hard-wearing, waterproof, and self-draining, stopping bacteria and mildew from building up.  The catch is a part of our IPX6 waterproof 12/24V Qi-certified waterproof wireless charging range that enables wireless charging for the outdoor environment without phone charging cables. Small and compact, our charging mat design suits any boat type, unlocking charging possibilities onboard. Simple Install with one easy cut (2.5” (65mm) hole saw) into your chosen mounting location, then peel off the 3M self-adhesive backing paper and firmly press down.  Connect to a 12/24V power source.  The catch is perfect for storing your other personal items such as wallets and keys as the charger will only begin to charge when a phone is placed on the mat. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max: - 2A   Output Power: 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Charging mat Wireless charger Instruction manual *Sold as an Individual  Specifications: Type: Chargers Box Dimensions: 2"H x 5"W x 8"L WT: 0.4 lbs UPC: 5060114798038 Quick Guide (pdf)

Read more less

TouchView Controller for Dolphin Charger PROThe TouchView lets you view operations and access remote charger setting menus. The color touch screen provides an intuitive selection of measurements (amperage, voltage, charge percentage), charging phases (boost, absorption, float), and allocated available power and possible operation faults.Features: Color touchscreen measurements: voltage, amperage, charging mode, and operating parameter settings Anomaly display: battery voltage too low, internal temperature too high, fuse Operation log Fault and alarm display (activation of relays or not) Communications protocol: CAN bus Connection via an RJ11 plug External diameter 3-5/8" (chrome plated trim), mount using 4 screws. Can be mounted on front panel of Pro chargers. Works with Pro and 12V-60A, 24V-30A Premium chargers.

Read more less

RJ45 UTP - 5M CableA cable to connect Phoenix Inverter Control, VE Interface MK3-USB, and VE.Bus connections between multiple VE.Bus devices and GX devices.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Heavy Duty Current Model Mercruiser Solenoid with Raised Isolated BaseHeavy duty Mercruiser solenoid that will fit Mercruiser and Mercury, Isolated base, 12 Volt.Replaces:MERCURY 89-846070HDMERCURY 89-94318HD*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 3"H x 3"W x 4"L WT: 0.4 lbs UPC: 693006010311

Read more less

65A PVC Coated Continuous Duty SolenoidRemotely switch high amperage loads with a low amperage on-off switch.Features: Continuous duty, 65A at 12V DC Intermittent rating 100A: 10 seconds Copper #10-32 thread signal terminals Copper 5/16”-24 thread contact terminals PVC coated steel case Bracket mounting holes 5/16” x 19/32”, 2-13/64” on centers UL and CE approved Same as Cole Hersee part number 24117-01 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

RJ45 UTP - 3M CableA cable to connect Phoenix Inverter Control, VE Interface MK3-USB, and VE.Bus connections between multiple VE.Bus devices and GX devices.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Brown 4 AWG Wire Ferrule - 16mm Length - 10 PackWire fraying can quickly become a problem when dealing with IEC (European)-style terminal blocks. As the wire frays, the connection becomes weaker, and the problem will need to be addressed. But all that can be prevented. How? By utilizing wire ferrules. Wire ferrules are a type of terminal that prevents wire fraying. It covers the stranded wire and creates a solid, connected piece. In a sense, wire ferrules make stranded wire behave like solid wire. This is important, especially when working with IEC terminal blocks.How are wire ferrules properly used? The first step is to strip the wire to the correct length. Now slide the ferrule over the exposed wire. Make sure that the nylon casing butts up to the wire insulation. Once set, crimp using the proper tool. Using the proper tool is important, as, without the proper pressure, the wire may not create a solid connection. Proper crimping pressure and technique are key to ensuring continued performance. Once properly crimped, users can add heat shrink for added protection if they choose. Features: Prevent strand separation while minimizing strand breakage Insulated ferrules provide additional electrical insulation Increase connection reliability when terminating stranded wire in terminal blocks Specifications: Package Size: 10 Wire Size (AWG): 4 Insulation Color: Brown Ferrule Length: 16mm (0.63 in.) Stripping Length: 18mm (0.75 in.) Quick Guide (pdf)

Read more less

This convenient adapter allows quick thru-hull connections to an AC extension cord - with no cutting or splicing required - using the male AC plug from any of our chargers. The watertight cover and gasket prevent corrosion on the AC plug when it isn't in use.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

DTP Deutsch Socket for 14-12 AWG Wire - Size 12 Contact (10 Pack)Deutsch machined contacts are for use with almost the entire line of Deutsch connectors and are ideal for marine conditions. They are known for their reliability and durability which are just a few of the reasons that the professionals turn to these contacts for repeatable and reliable results. Another benefit of these contacts is the fact that they are simple to use and require little time for installation.Features: Easy to install Field serviceable  Applications: Cable-to-cable applications Enclosed connectors offer field-proven reliability and rugged quality  Characteristics:Hand-insertable contacts Compliances: Ingress Protection (IP) Level: IP68 and IP6K9K RoHS UL Recognized Specifications: Cavity Style: Plug (socket) Connector Type: DTP Wire Size: 14-12 AWG Current Rating: 25 Package Size: 10 Contact Size: 12 Operating Temperature: -55°C to 125°C Brochure (pdf)

Read more less

Single Jack HDMI ConnectorBuild or expand a SmartPlug data port with this single-jack HDMI connector.Features:Single HDMI connector portSpecifications: Material: Non-metallic Color: Black Quick Guide (pdf)

Read more less

Universal DC Cable Extender - 15'Universal design for all marine chargers with ring terminal cables. No cutting, stripping or splicing required.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

VE. Direct - 10M Cable (1 Side Right Angle Connector)Features: Cable Length: 10M 1 Side Right Angle Connector Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Single Jack J35 Ethernet ConnectorBuild or expand a SmartPlug data port with this single-jack J35 Ethernet connector.Features:Single Ethernet cable connector portSpecifications: Material: Non-metallic Color: Black Quick Guide (pdf)

Read more less

1011Features: Features watertight cap, easy installation, and twist locks securely with plug Designed to withstand the rigors of wet environments and constant vibration Large contact surfaces for good electrical connection Twist lock system-plug locks securely into socket Internal strain relief and cord seal Nickel plated copper alloy used for all current carrying components Front panel, rear panel, or surface mount WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Cove Wireless RGB LED Charger 3-Coil - 15W - 12/24VCove LED now with 15W 3-coil technology. The pioneering three-coil Cove LED charger is designed to revolutionize your charging experience. Cove LED is perfect for integration into consoles, seating, cabinetry, and more! Simply slide your phone into the pocket and instantly start wirelessly charging.This updated version of Cove has a 3-coil charging system. This is a game-changer for outdoor waterproof charging, with three overlapping charging coils that maximize performance, ensuring reliable charging from various phone placements. The front lip with an easy-access thumb bevel acts as a safety barrier, making sure your phone stays inside!The intelligent electronics ensure optimal charging by selecting the best coil based on the phone's location. The built-in heat management system also adjusts charging speed based on ambient and phone temperature. This charger is tailored for those seeking uninterrupted charging during outdoor adventures, offering a reliable and efficient solution for powering devices on the go.Intelligent charging:Even when at sea or driving over rough terrain, the intelligent charging features are designed to mirror the movement of your phone, to ensure a constant charge, no matter the adventure or the placement of the phone on the charger.Three-coil system:With a three-coil system that overlaps, there is NO DEAD SPACE, resulting in the most efficient & most amount of power regardless of the phone's position.Hot climates:No problem. With a larger cavity the electronics are designed for thermal management by efficiently dissipating heat, this charger will perform better than other chargers in 30°C (86°F). It will also monitor your phone's heat, adjusting the power output to ensure it does not overheat, helping prolong the health of your phone!Simple Installation:One easy cut into your chosen mounting location,4 screws supplied for fixing and a front fascia to leave the finished result clean and uncluttered – you're now ready to Store. Charge. Connect!Rounded corners and tapered front design eliminate all snagging risks, making it possible to install in high-traffic areas of the boat where phone charging/storage until now has been impossible.LED light system:Designed to eliminate the need to lift your phone off the charger, the LED lights are a fast visual method for seeing when power is being delivered to your phone. Additionally, the LED on the base acts as a rear installation light, making the fitting process as quick and easy as possible.Red light shows: Charger is in standby mode.White light shows: Phone is charging.Wash DownWorried about getting water inside? No problem! Cove automatically drains either out of the front or through the self-drill drains out of the rear of the housing with the option to use a push-fit drain tube to route water away. Dual Functionally Featuring an intelligent Foreign Object Detection, Cove is perfect for storing your other personal items such as wallets and keys as the charger will only begin to charge when a phone is placed on the mat – nothing else!Features: 12/24V 15W Charger IPX6 Waterproof Qi-compatible Store and Charge Input Voltage Range: 10-30V DC (12/24V system) Three overlapping charging coils maximize performance. Reverse polarity protection No alignment is needed, throw your phone into the charger and your phone will always charge! Uninterrupted charging during outdoor adventures Rear installation light, for testing power & correct wiring. LED light acts as a quick visual guide to show the phone is charging. Simple one-cut installation Foreign object detection 5-year warranty Our Testing EthosOur testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, we design our products to be able to thrive in the harshest of outdoor environments.Before any product is released, it must pass through our rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.Our commitment to quality has earned us the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about our testing program and certifications, please feel free to reach out to us. Owner's Manual (pdf)Brochure (pdf)

Read more less

Surface Waterproof Wireless Charger 3-Coil - 15W - 12/24VExperience 15W Intelligent Charging. The pioneering 15W 3 coil surface charger is designed to revolutionize your charging experience. This waterproof and wireless charger can be fitted to any smooth surface, indoors or outdoors.Three overlapping charging coils maximize performance, ensuring reliable charging from various phone placements. With a rubber edge to help keep your phone in place. This charger is tailored for those seeking uninterrupted charging during outdoor adventures, offering a reliable and efficient solution for powering devices on the go.Intelligent charging:Even when at sea or driving over rough terrain, the intelligent charging features are designed to mirror the movement of your phone,to ensure a constant charge, no matter the adventure or the placement of the phone on the charger.Three-coil system:With a three-coil system that overlaps, there is NO DEAD SPACE, resulting in the most efficient & most amount of power regardless of the phone's position.Hot climates:No problem. With a larger cavity, the electronics are designed for thermal management by efficiently dissipating heat,this charger will perform better than other chargers at 30°C (86°F). It will also monitor your phone's heat, adjusting the power output to ensure it does not overheat, helping prolong the health of your phone!Installation:No sealant is required! Simply route out the required shape with our handy template and use the 3M tape on the underside of the charger to adhere to your counter's surface.LED light system:Designed to eliminate the need to lift your phone off the charger, the LED lights are a fast visual method forseeing when power is being delivered to your phone. Additionally, the LED on the base acts as a rear installation light, making the fitting process as quick and easy as possible.Red light shows: Charger is in standby mode.White light shows: Phone is charging.Features: 12/24V 15W Charger IPX6 Waterproof Qi-compatible Input Voltage Range: 10-30V DC (12/24V system) Three overlapping charging coils maximize performance. Reverse polarity protection No alignment is needed, throw your phone on the charger and your phone will always charge! Uninterrupted charging during outdoor adventures Rear installation light, for testing power & correct wiring. LED light acts as a quick visual guide to show the phone is charging. Simple one-cut installation Foreign object detection 5-year warranty Our Testing EthosOur testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, we design our products to be able to thrive in the harshest of outdoor environments.Before any product is released, it must pass through our rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.Our commitment to quality has earned us the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about our testing program and certifications, please feel free to reach out to us. Owner's Manual (pdf)Brochure (pdf)

Read more less

Original Equipment Quality Replacement Solenoid for Mercury - Isolated Base, 12VReplacement solenoid that will fit Mercury. Isolated base, 12 Volt.Replaces: MERCURY 87-61053 MERCURY 89-15857 MERCURY 89-68258 MERCURY 89-68258A4 MERCURY 89-76545 MERCURY 89-76545T MERCURY 89-853654A1 SIERRA 18-5815 *ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Outboard Solenoid for Mercury/Force with Isolated BaseThe outboard solenoid that will fit Mercury /Force, Isolated base, 12 Volt.Replaces:MERCURY 89-817109A1MERCURY 89-817109A2MERCURY 89-817109A3SIERRA 18-5834*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 3"H x 3"W x 4"L WT: 0.75 lbs UPC: 693006001678

Read more less

ERC-12-35 Emergency RelayThe Emergency Relay/Charger is a device for assuring immediate backup power to communications equipment in the event AC power is temporarily lost to the power supply or the supply fails. In addition, it will allow the power supply to act as a “trickle” battery charger without any additional modification.When the ERC senses a loss of DC voltage, it employs a fast-acting S.P.D.T. relay to automatically switch the equipment’s DC input over to a standby battery to allow continued operation. When the power supply is returned to service, the ERC disengages the battery and puts the supply back online to provide DC voltage. While the power supply is operating normally, a small portion of the output current is directed to the battery to trickle-charge and maintain it at full voltage. (Note: Battery float voltage will be maintained at .7 volts lower than the power supply voltage.)Note: If the power supply is down for an extended period, the backup battery may become significantly discharged while powering the radio. When the supply returns to service, the trickle charge rate of the ERC may be insufficient to restore the battery to full charge promptly. In the event this occurs, a supplemental charger may be necessary to bring the battery to full charge.InstallationSelect a suitable location as close to the battery as possible where there is no likelihood of accidental contact and shorting of the terminals. The ERC may be mounted vertically, horizontally, or even upside-down, if necessary, without affecting its operation. Two # 10 sheet metal or wood screws will be needed. Mounting on a metal surface is acceptable as the inputs and outputs are isolated from the mounting bracket.Note: If the battery is stored in an unventilated enclosure, users are not recommended to mount the ERC within the same enclosure. As with any relay, it should not be in an area where there may be battery gases or any other potentially explosive gases present.WiringThe wiring should be as direct as possible. Ensure that the battery posts are free from corrosion. Determine the correct gauge wire using the information below. The wire length is the total length of the run (ERC-to-Radio + Power Supply-to-ERC) or (ERC-to-Radio + Battery-to-ERC), whichever is longer. 5 ft. wire length = #8 AWG 10 ft. wire length = #6 AWG 15 ft. wire length = #4 AWG 20 ft. wire length = #4 AWG Use the provided crimp ring lug connectors to secure wiring to the ERC. Models ERC-12-15 and ERC-24-15 have yellow plastic terminal covers, which must be reinstalled after wiring to prevent accidental shorting.Specifications: Input Range: 10.0-14.5 VDC (12V) Relay Rating: 30 amps continuous & 35 amps intermittent Float Trickle (typical): 0.1 amps Dimensions (inch): 5-1/8" x 2-7/8" x 3-5/8" Weight: 1.15 lbs Owner's Manual (pdf)

Read more less

24V 6 Gauge Heavy Duty Series SystemAlways on the cutting edge of rigging and power solutions, CONNECT-EASE has been watching the trolling motor landscape change significantly as Minn Kota, Power-Pole, Garmin, Lowrance, and others launch more powerful and torque-enabled models in everything from 12 to 36 volts; there are even some 48-volt models starting to appear. The upcoming years will be fascinating as Minn-Kota showcases the pre-launched, completely redesigned brushed and new brushless trolling motors—everything from Terrova to Ulterra to Ultrex—as exciting QUEST series versions in these trolling motor families.The same goes for Power-Pole with their recently introduced MOVE brushless trolling motors. Garmin and Lowrance also promise to show some advanced, trolling motor designs.Yes, trolling motors are getting a lot more advanced, and with that, rigging will become an even greater challenge. These brushed and brushless trolling motors require clear, clean, and reliable power, which is where CONNECT-EASE trolling motor rigging and power solution products come in.Features: 6-gauge wire, a quick and easy installation, and powerful, proven performance for any 24V trolling motor installation Lithium-compatible and the best power connection for 60-120 amp lithium batteries and any brand/model 24V trolling motor Heat-shrinkable butt splices

Read more less

Hidden Waterproof Wireless Charger 3-Coil - 15W - 12/24VHidden from view, ready to charge. Engineered to be installed under the surface, leaving the top surface uncluttered. The pioneering three-coil hidden charger is designed to revolutionize your charging experience. Mounted underneath your selected surface, Hidden 3 Coil gives a sleek and ultra-clean aesthetic. With the option of having a rubber grip to showcase location or to go ultra-minimal, you could etch a marker or logo to showcase placement for your phone.The charger's innovative three-coil design is a game-changer for outdoor waterproof charging. Three overlapping charging coils maximize performance, ensuring reliable charging from various phone placements.The intelligent electronics ensure optimal charging by selecting the best coil based on the phone's location. Additionally, the built-in heat management system adjusts charging speed based on ambient and phone temperature. This charger is tailored for those seeking uninterrupted charging during outdoor adventures, offering a reliable and efficient solution for powering devices on the go.Features: 12/24V 15W Charger IPX6 Waterproof Qi-compatible Input Voltage Range: 10-30V DC (12/24V system) Three overlapping charging coils maximize performance Reverse polarity protection Ultra-grippy rubber edge – to show the location of the charger and for phone grip. No alignment is needed, throw your phone on the charger and your phone will always charge! Uninterrupted charging during outdoor adventures Rear installation light, for testing power Simple one-cut installation Foreign object detection 5-year warranty Our Testing EthosOur testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, we design our products to be able to thrive in the harshest of outdoor environments.Before any product is released, it must pass through our rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.Our commitment to quality has earned us the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about our testing program and certifications, please feel free to reach out to us. Owner's Manual (pdf)Brochure (pdf)

Read more less