Active GPS Antenna for GX LTE ModemThis antenna is for the GX LTE Modem.Specifications: Mounting Option: Magnet Cable Type: RG-74 Cable Length: 3.0 m Connector: SMA male straight Frequencies: 1575.42 MHz Signal Gain: 50 Ω Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

9230Analog Meter Shunt 100A/50mV For use with DC Ammeters For continuous operation, it is recommended that shunts not to be run at more than two-thirds (66%) the rated current under normal conditions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

AC Digital Multimeter with Alarm Displays amperage from 0 to 150 Amps Displays voltage from 80 to 270 Volts Displays power from 0 to 45 Kilowatts Displays frequency from 40 to 90 Hertz High and low voltage and high amperage alarms, both audio and visual 3 levels of display brightness Programmable sleep mode blanks display for power conservation Splashproof front Includes current transformer Three levels of display brightness WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

AC Current TransformerRatio: 150A AC/50mA ACFor use with AC AmmetersWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

DC Shunt For use with DC Ammeters For continuous operation, it is recommended that shunts not to be run at more than two-thirds (66%) the rated current under normal conditions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

DC Digital Ammeter Displays amperage from -500 to +500 Amps 3 levels of display brightness Splashproof front Manual sleep mode blanks display for power conservation Standard meter operates in negative side of circuit only. Shunt Shifter required for positive side installation such as alternators Includes 500 Amp shunt Applicable for 12, 24, 32, 36, and 42 Volt DC systems WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

AC Digital Ammeter Displays amperage from 0 to 150 Amps 3 levels of display brightness Splashproof front Includes current transformer Manual sleep mode blanks display for power conservation WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

SmartShunt 300A IP65 Bluetooth Battery MonitorThe SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information, and much more.Alternatively, the SmartShunt can be connected and read by a GX device. The connection to the SmartShunt is made via a VE direct cable.The SmartShunt is a good alternative to a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter are desired. It is equipped with Bluetooth, a VE.Direct port, and a connection that can be used for monitoring a second battery, midpoint monitoring, or a temperature sensor.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Energy Meter VM-3P75CT Single + 3-PhaseThe Victron VM-3P75CT energy meter is a standard device to measure the power and energy of single- and three-phase applications and calculates each phase's power values and broadcasts this over VE.Can or Ethernet with a high rate.  It has built-in Ethernet and VE.Can ports for connecting to a GX device and the split-core current transformers enable easy and quick installation without modifying existing wiring.The energy meter works out of the box (the firmware may need to be updated; details can be found in the Firmware Updates chapter) as a grid meter for systems with a MultiPlus and Quattro. Configuration (via VictronConnect) is only required for changing the role and manual IP configuration rather than the default DHCP.  Its data is displayed on a GX device such as the Cerbo GX or Ekrano GX, as well as in VictronConnect and the VRM Portal.Specifications: Voltage connection: Direct Input voltage range L-N: 85 to 265VAC Input voltage range L-L;150 to 460VAC Frequency: 50/60Hz Current connection: Via current transformers (included - wire length 640mm (25.2in) Rated current: 75A VE.Can communication port: Two RJ45 connectors (VE.Can terminators included) Ethernet communication port: One RJ45 connector, Modbus UDP Refresh rate: 100ms Type: Self-power supply via L1-N Switch or circuit breaker: Required as means of a disconnecting device - not included External fuse [1]: Required in the neutral conductor - 500mA, not included Consumption: 1.45W / 3.1VA Frequency: 50/60Hz Material & Color: Polycarbonate, blue (RAL5012) Voltage connection: Screw terminals 0.25 - 1.5mm2 (24 - 16AWG) Current transformer connection: Pluggable screw terminals (included) Protection category: IP20 Weight: 370g (including packaging) Dimensions: 90 x 71 x 59mm (3.5 x 2.8 x 2.3in) Indoor/outdoor usage: Indoor only Operating temperature: From -10 to +55 °C Storage temperature: From -20 to +70 °C Relative humidity: < 90% non-condensing Altitude: 2000m (6562ft) Mains supply voltage fluctuations: ±0.1Vin Overvoltage category: Cat. III Pollution degree: 2 What's In The Box? Victron VM-3P75CT with 3 input terminal blocks 3x Split-core current transformer, wired ready for connection Wire length: 640mm (25.3") VE.Can terminators (2-pieces) Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Replacement Shunt for BMV Monitors - *PCB is NOT Included*Replacement 500A/50MV shunt for BMV Monitors*BMV PCB is NOT included and must be purchased separately*Warranty InfoPlease contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

1741200 Mini OLED Temperature Monitor - BlueMonitors essential electrical system parameters on a bright, waterproof, daylight readable OLED screen.Features: Compact size enables mounting in any convenient location Reverse polarity protected Mounts in a common 1-1/8 in hole Convenient temperature monitoring Temperatures range from -40°C to 125°C (-40°F to 250°F) Measures in Fahrenheit or Celsius Color: Blue Meter: Temperature Nominal Voltage: 12V DC/24V DC Resolution: 1°F or 1°C Accuracy: +-1.25% Operating Current: 10mA Switching Cycles: 10,000 Weight: 0.30lb (0.14 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Digital Multi Control 200/200AThis panel is intended both for Multis and Quattros. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example. Setting range: up to 200 Amps. The brightness of the LEDs is automatically reduced during night time.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Cerbo GX MK2Victron's Cerbo GX MK2 is the most commonly used GX product. This communications center has hardware revision 2 with two VE.Can ports, 3 USB host ports, and digital input pulse counting.The Cerbo GX MK2 Is Different from the Cerbo Gx since It Has: Two fully functional CAN bus ports- VE.Can 1 and VE.Can 2. Instead of one VE.Can and one BMS-Can port VE.Can 1 is isolated (on previous models, there was no isolated CAN-bus port) RJ-45 sockets have been rotated 180 degrees, so it's easier to take the cables out All three USB ports are fully functional (instead of two functional and one for power (to a GX Touch) only) Digital inputs can do pulse counting This communication center allows users to always have perfect control over the system from wherever they are and maximizes its performance. Connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch 50, an MFD, or Victron's VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX range combines all the best of connectivity, redefining smart power solutions in every way.Perfect Monitoring & ControlInstantly monitor the battery state of charge, power consumption, and power harvest from PV, generator, and mains, or check tank levels and temperature measurements. Easily control the shore power input current limit, (auto)start/stop generator(s), or change any setting to optimize the system. Follow up on alerts, perform diagnostic checks, and resolve challenges remotely. The Cerbo GX MK2 turns any power challenge into an effortless experience.Maximize Your System PerformanceThe Cerbo GX MK2 maximizes the performance of a system's components in real time and keeps them in perfect tune. This enclosure has two fully functional CAN bus ports, called VE.Can 1 and VE.Can 2. Instead of one VE.Can and one BMS-Can port. VE.Can 1 is isolated. In the previous models, there was no isolated canbus port. This can be useful where a Lynx Smart BMS (VE.Can connection) as well as an RV-C port are required.Expand Your ViewThe (optional) GX MK2 Touch 50 display gives users an instant overview of their system and adjust settings in the blink of an eye. Its super slim 5-inch waterproof design, top-mountable setup, and simple installation bring a lot of flexibility when creating a crisp and clean dashboard.Simple Mounting & ConfigurationThe Cerbo GX MK2 is now optimized to more than meet the standards of installer professionals. The device is easily mountable on a DIN-Rail (with DIN35 adapter small, not included), and its separate touchscreen can now be bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the Color Control GX MK2). It is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard. Its new Bluetooth feature enables a quick connection and configuration via the VictronConnect app.Outsmart Any Power ChallengeThe Cerbo GX MK2 serves endless purposes, extending perfect control to the most diverse applications. For solutions including generators, such as marine, or backup & off-grid, it will auto-start/stop the generator, or delay ignition until the end of ‘quiet’ periods. It keeps backup batteries at 100% for energy storage systems, kicks in during power cuts, and diverts excess (solar) power to self-consumption, saving users money. For RVs and emergency vehicles, it keeps vital systems functioning flawlessly. But that’s just to name a few...Specifications: Remote Console: Yes Buzzer: Yes VE.Direct ports (always isolated): 3 VE.Bus (always isolated): 2 paralleled RJ45 sockets VE.Can: Yes, VE.Can 1 isolated & VE.Can 2 non-isolated USB: 3 USB Host ports Ethernet: 10/100 RJ45 socket - isolated except for shield WiFi: Built-in Bluetooth Smart: Yes Micro SDcard slot: SDHC cards up to max. of 32GB (5) Second CAN-bus port (BMS-Can): Yes - see VE.Can BMS-Can port: No Built-in RS485: No Programmable Relay: 2 x NO/NC (8), DC up to 30VDC: 6A, DC up to 70VDC: 1A, AC: 6A, 125VAC Resistive Tank Level Inputs: 4 Temperature Sense Inputs: 4 Same as part# BPP900450110 other than Country of Origin Digital Inputs: 4 Performance Specifications: CPU: Dual-core RAM: 1GB Max. VE.Direct Devices: 15 Other Specifications:  Supply Voltage: 8 - 70 VDC Power Draw: 2,5 to 5 W Mounting: Wall or DIN rail (35mm) Outer Dimensions  (H x W x D): 478 x 154 x 48 mm Operating Temperature: -20 to +50 degrees C Battery Backup Clock: Yes 5V Output: No Standards: Safety: IEC 62368-1 EMC: EN 301489-1, EN301489-17 Automotive: ECE R10-6 Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Type: Chargers Box Dimensions: 3"H x 6"W x 8"L WT: 0.9 lbs UPC: 8719076057833 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

SG210 Battery Monitor Kit with Display Shunt GatewayFeatures: Learns and displays all critical battery parameters Supports for all common battery chemistries and voltages Intelligent, self-calibrating accuracy Large, bright, color display Expandable architecture Includes Display Shunt Gateway This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

SG200 Battery Monitor Kit with Display Shunt & 10M Cable - 12-48 VDCBalmar’s Expandable, Next Generation Monitor.Features:Learns & Displays All Critical Battery Parameters   State of Charge (SoC%) State of Health (SoH%) Charge/Discharge Current Flow Time Remaining History, Faults & Alerts Support for All Common Battery Chemistries & Voltages Including Lead Acid, Lithium (LiFePO4), Standard AGM, TPPL AGM, Carbon Foam AGM, and GEL Batteries  Supports 12V-48V Battery Banks Typically 97% Accurate within 2 Cycles Auto-Calibrating Does not Lose Accuracy with Age  Large, Bright Color Display Sunlight Readable, Configurable & Dimmable 60 Degree Viewing Angle Fits in Standard 2 1/16″ Gauge Socket Expandable Architecture Support Multiple Displays (Optional) Supports Multiple Battery Banks  (Optional) Standard Support for 2 Start Batteries (Voltage Only) Simple, easy-to-install Point-to-Point Network Optional Smartphone/Bluetooth® Gateway Free iOS and Android Apps (Requires Bluetooth® Gateway PN SG2-0300) View All Parameters on your Phone Download Product Updates Balmar has combined recent technology advances to introduce a next generation battery monitor. The SG200 is quite simply the most accurate battery monitor available today. Balmar has combined the best features of its 1st generation Smartgauge™ with many advantages of a shunt-based amp-hour counting system. Further, we’ve designed a device architecture which facilitates multiple gauges or multiple shunts to be added to the network-allowing the boater to monitor multiple energy storage banks simultaneously from multiple locations.In addition, the SG200 Color Display is easy to read, configurable and fits any standard 2 1/16″ gauge socket. Now you can determine your battery(s) condition from anywhere on the vessel or vehicle with multiple displays, or simply add the optional Bluetooth® Smartphone App to keep information in your pocket!This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Bluetooth Gateway for SG200Optional 39″ Bluetooth® Gateway for Smartphone App.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

9354AC Analog Voltmeter - 2-3/4" Face, 0-250 Volts AC Dial Marked in 5 Volt increments Simple 2-wire connection to AC hot and neutral Meter senses and powers from same connection WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

AC Current TransformerRatio: 50A AC/50mA ACFor use with AC AmmetersWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

AC Analog Ammeter Simple 2-wire connection Meter senses and powers from coil slipped over wire to be measured Includes AC current transformer Backlit meter face WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Shunt Shifter Shunt Adapter for DC Digital Ammeter positive side shunt applications, such as alternator measurement The Shunt Shifter is designed for use with Blue Sea Systems 8255 Digital Meter Shunt Advanced technology shifts the shunts positive reference to negative as required by digital meters Easily installs directly onto shunt using existing sense screws Ideal for use with 12-36 Volt DC systems Includes all necessary hardware WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

M2 AC MultimeterMonitors AC Amps, Volts, Hzs on large, bright display. Supports programmable current transformer ratios. Accurately measure and monitor AC amperage, voltage and Hz. (measures 2 voltages and 2 circuits)Features: Auto-dimming, bright OLED display is easy to read Easy to adjust 92dB alarm on all models Isolated MOSFET relay Specifications: Meter: Current, Frequency, Power, Voltage Function: 50 to 250V to 300A Alarms: High/Low Current, High/Low Frequency, High/Low Voltage Display Size: 55mm x 28mm Input Voltage: 7-70V DC Maximum Power Consumption: 1.00Watt Minimum Power Consumption: 0.3 Watt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

M2 DC VoltmeterMonitors DC Voltage on large, bright display. Accurately measures and monitors the voltage of up to three batteries.Features: Auto-dimming, bright OLED display is easy to read Easy to adjust 92dB alarm on all models Isolated MOSFET relay Specifications: Meter: Voltage Function: 8 to 70V Resolution: 0.01V DC Alarms: High/Low Voltage Display Size: 55mm x 28mm Input Voltage: 7-70V DC Maximum Power Consumption: 1.00Watt Minimum Power Consumption: 0.3 Watt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

9233Analog Meter Shunt 200A/50mV For us with DC Ammeters For continuous operation, it is recommended that shunts not to be run at more than two-thirds (66%) the rated current under normal conditions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SG205 Battery Monitor Kit with Bluetooth Gateway - No DisplayFeatures: Learns and displays all critical battery parameters Supports for all common battery chemistries and voltages Intelligent, self-calibrating accuracy No display included Expandable architecture Includes Bluetooth Gateway This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Micro Voltmeter Dial marked in 5 Volt increments Simple 2-wire connection to AC hot and neutral Meter senses and powers from same connection Backlit meter face WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

M2 AC VoltmeterMonitors AC Voltage on large, bright display. Accurately measure and monitors the voltage of your AC system. (measures 2 independent circuits or 1 double phase circuit)Features: Auto-dimming, bright OLED display is easy to read Easy to adjust 92dB alarm on all models Isolated MOSFET relay Specifications: Meter: Voltage Function: 50 to 250V Resolution: 1V AC Alarms: High/Low Voltage Display Size: 55mm x 28mm Input Voltage: 7-70V DC Maximum Power Consumption: 1.00 Watt Minimum Power Consumption: 0.3 Watt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Replacement 500A PCB for Shunt on BMV 702 & 712 MonitorsReplacement PCB only for 500 Amp shunt on BMV 702 & 712 MonitorsWarranty InfoPlease contact your dealer for any returns, repairs or support issues related to this product.

Read more less

Round Voltage Meter - 6V-30VCompact size allows for installation in a variety of locations - the same round size as a standard 12V receptacle. For interior or fully protected locations only. Specifications: Type: Round Digital Voltage Meter 4V-30V DC WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Battery Fuel Gauge - DeltaView® Link Compatible - 36V System (3-12V Batteries, 6-6V Batteries)The Pro Charging Systems (PCS) Battery Fuel Gauge (BFG) measures your battery’s energy state with unparalleled precision and accurately displays the information with easy to read color coded LEDs. Our BFGs are DeltaView® Link (DVL) compatible which lets you to monitor the state of charge of your batteries right from your iOS™ or Android™ mobile device. Since our BFG uses intuitive technology, it fits and adapts to a wide range of applications. We take great pride in the performance, quality and versatility of our products backed by exceptional customer service. 2.25” Diameter x 2.5”L Requires 2” cutout Cable Length:13.0’ Features: Nine LED array shows level of battery pack depletion LED array flashes while charging the battery pack Low Battery Voltage LED Indicator - Red indicator flashes warning and stays on when charging is required Status self-adjusts while charging is in progress DeltaView® Link App compatible to conveniently check the status of your battery pack from your wireless device Rugged PC ABS polymer case/water resistant design For use with Lead Acid (Wet Cell) and AGM batteries Installation is simple and requires a 2 inch diameter cutout Accurately Displays Battery Pack State/Charge Status With DVL - View Charge Status From Your Wireless Device TROUBLE FREE — Easy Installation - Connect It and Forget It! Advanced Microprocessor Constantly Evaluates Battery Pack State Durable, Water Resistant - Made in the USA and Built To Last Used in Many Applications Such As: Golf Carts Hunting Buggies Electric Utility Vehicles LSVs Aerial Lifts Lift Trucks Scrubbers Lawn Equipment Emergency Vehicles Boats and More... This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

AC Digital Frequency Meter Displays frequency from 40 to 90 Hertz 3 levels of display brightness Splashproof front WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

LinkLITE Battery MonitorBattery Status At A GlanceThe LinkLITE battery monitor can measure currents up to 1,000Amps. It selectively displays voltage, charge and discharge current, consumed amp hours and remaining battery capacity. It is equipped with an internal programmable alarm relay, to run a generator when needed or to turn off devices when the battery voltage exceeds programmable boundaries.DescriptionDefining the amount of energy available in a battery is a complex task since battery age, discharge current and temperature all influence the actual battery capacity. High performance measuring circuits, along with complex software algorithms, are used to exactly determine the remaining battery capacity. A new shunt selection feature enables the LinkLITE to measure currents up to 1,000Amps respectively.The LinkLITE selectively displays voltage, charge and discharge current, consumed amp hours and remaining battery capacity. Using a clear backlit LCD Display and an intuitive user interface, all parameters can be recalled with just a button press. A second battery input is also provided to monitor voltage on a second battery. It is equipped with an internal programmable alarm relay, to run a generator when needed or to turn off devices when the battery voltage exceeds programmable boundaries.Performance Features Read your battery bank like a fuel gauge Provides critical information about the status of your battery bank Displays voltage, current, consumed amp hours and remaining battery capacity Two battery inputs Auto sensing battery voltage inputs Large backlit LCD Display Quick nut mounting construction Programmable alarm relay Shunt selection capability enables flexible system integration Splash proof front panel 500 Amp shunt included CE and e-mark certified WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

SmartShunt 500AMP/50MV Bluetooth Smart Battery ShuntThe Smart Battery ShuntThe SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.VictronConnectVictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

SG230 Battery Monitor Kit N2K BT Gateway Color Display 12-48VDCN2K Version, connect to an existing N2K network to provide real-time data on the network, including: Voltage, SoC, SoH, Time Remaining, and Current. Incluses N2K Adapter cable.Features: Learns and displays all critical battery parameters Supports for all common battery chemistries and voltages Intelligent, self-calibrating accuracy Large, bright, color display Expandable architecture Includes Display Shunt Gateway This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Communication Cable for SG200 - 5MBalmar's communication cable specifically for the SG200. 5 Meters in length.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

AC Digital Voltmeter Displays voltage from 80 to 270 Volts 3 levels of display brightness Splashproof front Manual sleep mode blanks display for power conservation WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

DC Analog AmmeterShunt Type: External Simple 2-wire connection Meter Senses Powers from same connection Includes DC Shunt Backlit meter face WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Battery Fuel Gauge - Marine Dual Read Battery Monitor - 12V/24V System - 15' Battery CableThe Pro Charging Systems (PCS) Battery Fuel Gauge solves one of the most common complaints about battery status indicators currently on the market— that most battery status indicators are not accurate or reliable. Many employ old technologies. (PCS) battery fuel gauges change that paradigm. Think of the old “Motorola Brick Phone” from the late 1980s versus today’s iPhone. PCS battery fuel gauges measure a battery’s energy state with precision and accurately display the information. At a glance, the gauge is easy to read and understand. Since the system utilizes intuitive technology, it fits and adapts to a wide range of applications. We take great pride in the performance, quality, and versatility of our products backed by exceptional customer service.Features: Marine Dual Read Battery Monitor 12V/24V System 15' Battery Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Mini OLED DC VoltmeterMonitors DC voltage on a bright, waterproof, daylight readable OLED screen Compact size enables mounting in any convenient location IP66 waterproof Reverse polarity protected Mounts in a common 1-1/8 in hole Specifications Meter: Voltage Nominal Voltage:12V/24V DC Resolution: 0.01DC Input Voltage Range: 8-36V DC Operating Current: 15mA Voltage Accuracy:±1.0% WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

M2 DC SoC State of Charge MonitorAccurately measure and monitor the state-of-charge of your batteries. Supports programmable shunt ratios.Features: Auto-dimming, bright OLED display is easy to read Easy to adjust 92dB alarm on all models Isolated MOSFET relay Specifications: Meter: Current Voltage Function: 8 to 70V to 5000A (500A with included shunt) Alarms: High Current, High/Low Voltage, Low Battery Display Size: 55mm x 28mm Input Voltage: 7-70V DC Maximum Power Consumption:1.00Watt Minimum Power Consumption: 0.3 Watt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

DC Digital Voltmeter Displays voltage from 0 to 60 Volts 3 levels of display brightness Splashproof front Manual sleep mode blanks display for power conservation Applicable for 12, 24, 32, 36, and 42 Volt DC systems WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

1842 M2 OLED Digital Bilge MeterThe M2 Organic LED Digital Monitor measures essential electrical system parameters with adjustable alarms and an auto-dimming display. The M2 Monitors include a MOSFET External Circuit Relay (ECR) which can be used to control external circuits based on any value measured by the M2.Features: Auto-dimming, bright Organic LED display is easy to read 80dB alarm on all models Isolated 500mA MOSFET relay Bilge float switch not included Specifications: Meter: Bilge Function: Monitors up to 4 bilges Alarm/Relay Activation: Run time/hr Cycles/24 hr Average Cycles Display Size: 55mm x 28mm Input Voltage: 7-70V DC Range: 0.3W-1.0W WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

SmartShunt 500A/50MV IP65 Bluetooth Battery MonitorThe Smart Battery ShuntThe SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information, and much more.Alternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter are wanted.The SmartShunt is equipped with Bluetooth, and a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring, or a temperature sensor.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Continuous Amperage: 500A Lockable: No Box Dimensions: 4"H x 4"W x 6"L WT: 1.15 lbs UPC: 8719076057895 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

LinkPRO Battery MonitorBattery Status At A GlanceDefining the amount of energy available in a battery is a complex task since battery age, discharge current and temperature all influence the actual battery capacity. High performance measuring circuits, along with complex software algorithms, are used to exactly determine the remaining battery capacity. A new shunt selection feature enables the LinkPRO to measure currents up to 10,000 Amps.The LinkPRO selectively displays voltage, charge and discharge current, consumed amp hours, remaining battery capacity and the time remaining of your battery bank. Using a clear backlit LCD Display and an intuitive user interface, all parameters can be recalled with just a button press. A second battery input is also provided to monitor voltage on a second battery.It is equipped with an internal programmable alarm relay, to run a generator when needed or to turn off devices when the battery voltage exceeds programmable boundaries.Performance Features Read your battery bank like a fuel gauge Provides critical information about the status of your battery bank Displays voltage, current, consumed amp hours and remaining battery capacity Two battery inputs Auto sensing battery voltage inputs Large backlit LCD Display Quick nut mounting construction Programmable alarm relay Shunt selection capability enables flexible system integration Splash proof front panel 500 Amp shunt included CE and e-mark certified Displays time remaining Communication/expansion port Stores a wide range of history events in internal memory Advanced programmable alarm relay Battery temperature sensor input WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Micro Ammeter Simple 2-wire connection Meter senses and powers from coil slipped over wire to be measured Includes AC current transformer Backlit meter face WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

DC Analog AmmeterShunt Type: Internal Backlit meter face Simple 2-wire connection Meter Senses Powers from same connection WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

DC Analog Micro Voltmeter Simple 2-wire connection Meter Senses Powers from same connection Backlit meter face WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SmartShunt N2K 350AMP 12-48VDC for SG200 DisplayAdd a SmartShunt for Additional Bank and N2k Connectivity: Includes SmartShunt and N2k Adapter. Does NOT include SmartLink Cable*Works with the SG200 display and or Bluetooth Gateway sold separately. One is needed for Programming.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

TRUEcharge3 Remote PanelAdvanced Remote for Monitoring and Full Control of Battery Charger PerformanceThis full-function remote allows you to monitor and control battery charger performance from a remote location, including features not accessible from the charger’s onboard display. The Remote Panel reads like a fuel gauge and displays critical information on the charging of battery banks. It is very easy to install, read, and operate, connecting with the battery charger through the included telephone cable. The TRUECharge3 Remote Panel is designed for use with TRUECharge3 Battery Chargers.Compatible with: TRUEcharge3 12V (20/40/60A) and TRUEcharge3 24V (10/20/30A)Features: Full function compatibility with TRUEcharge3 battery chargers Provides additional features inaccessible via the charger’s onboard display Allows charger to be powered on or placed on standby while AC power is connected Adjust maximum charger output current Displays individual battery bank status Connects two TRUEcharge3 chargers in parallel for up to 2x the output current FCC Class B compliant

Read more less