Heavy Duty Lugs - 6 Gauge Wire - 5/16" Post - 100-PackCable Gauge: 6Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Post Size: 5/16" Package Qty: 100 Heat Shrink: No Gauge: 6 AWG Box Dimensions: 1"H x 6"W x 6"L WT: 1.05 lbs UPC: 091887249194 Quick Guide (pdf)

Read more less

Heavy Duty Lugs - 8 Gauge Wire - 5/16" Post - 25-PackCable Gauge: 8Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Post Size: 5/16" Package Qty: 25 Gauge: 8 AWG Heat Shrink: No Box Dimensions: 1"H x 1"W x 3"L WT: 0.4 lbs UPC: 091887241044 Quick Guide (pdf)

Read more less

Tinned Lug 4/0 AWG - 3/8" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 4/0 Stud Size: 3/8” Length: 2.344” Width: 0.984” Clearance: 0.547” Package Size: 10 Specifications: Gauge: 4/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 3/8" Type: Lugs Box Dimensions: 1"H x 5"W x 9"L WT: 0.9 lbs UPC: 840248205733 Brochure (pdf)

Read more less

Heavy Duty Lug 4GA Wire #10 Post *2-PackAncor Marine Grade lugs are manufactured from 100 percent heavy-duty annealed tinned copper, providing maximum current flow while resisting corrosion from salt and moisture. The seamless barrel design allows for maximum strength when crimped. Closed-end design seals out moisture so cables stay dry and corrosion free.Specifications: 100% Tinned Copper UL 486A Specifications: Gauge: 4 AWG Heat Shrink: No Package Qty: 2 Post Size: #10 Type: Lugs Box Dimensions: 1"H x 2"W x 3"L WT: 0.05 lbs UPC: 091887253023

Read more less

Tinned Lug 4/0 AWG - 5/16" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 4/0 AWG Stud Size: 5/16" Length (inch): 2.344" Width (inch): 0.984" Clearance (inch): 0.547" Package Size: Ten included Specifications: Gauge: 4/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 5/16" Type: Lugs Box Dimensions: 1"H x 4"W x 7"L WT: 0.9 lbs UPC: 840248205757 Quick Guide (pdf)

Read more less

12-10 AWG - 5/16" Nylon Ring Terminal - 100-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Ring Terminals Post Size: 5/16" Package Qty: 100 Heat Shrink: No Gauge: 12-10 AWG Box Dimensions: 2"H x 3"W x 8"L WT: 0.75 lbs UPC: 091887222005 Brochure (pdf)

Read more less

Universal Speaker Connector Kit f/22-18 AWG Wire GaugeMarine speakers are equipped with male disconnects in two sizes (.250 tab for positive and either .188 tab or .110 tab for negative), depending on speaker manufacturer. Universal Speaker Connector Kits include two .250 tabs, two .188 tabs and two .110 tabs female heat shrink disconnects that enable installation of two speakers regardless of manufacturer. Female heat shrink disconnects are the optimal connector for speaker installation as they provide a sealed connection against the marine environment.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 22-18 AWG Type: Disconnects Package Qty: 1 Heat Shrink: No Box Dimensions: 1"H x 2"W x 4"L WT: 0.05 lbs UPC: 091887983241

Read more less

12-10 Gauge - #10 Heat Shrink Ring Terminal - 100-PackGauge Size: 12-10Screw Size: #10Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Heat Shrink: Yes Type: Ring Terminals Post Size: #10 Package Qty: 100 Box Dimensions: 2"H x 3"W x 8"L WT: 0.4 lbs UPC: 091887316124 Quick Guide (pdf)

Read more less

16-14 Gauge - #10 Heat Shrink Ring Terminal - 100-PackGauge Size: 16-14Screw Size: #10Quantity: 100Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Ring Terminals Post Size: #10 Package Qty: 100 Heat Shrink: Yes Gauge: 16-14 AWG Box Dimensions: 2"H x 3"W x 5"L WT: 0.25 lbs UPC: 091887313123 Quick Guide (pdf)Brochure (pdf)

Read more less

Heavy Duty Lugs - 6 Gauge Wire - 1/4" Post - 25-PackCable Gauge: 6Screw Size: 1/4" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Post Size: 1/4" Package Qty: 25 Gauge: 6 AWG Heat Shrink: No Box Dimensions: 1"H x 1"W x 3"L WT: 0.5 lbs UPC: 091887242041 Quick Guide (pdf)

Read more less

Heavy Duty Lugs - 2/0 Gauge Wire - 1/2" Post - 2-PackCable Gauge: 2/0Screw Size: 1/2" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Package Qty: 2 Heat Shrink: No Type: Lugs Post Size: 1/2" Gauge: 2/0 AWG Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 091887257083 Quick Guide (pdf)

Read more less

Heavy Duty Lugs - 2 Gauge Wire - 5/16" Post - 2-PackCable Gauge: 2Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Post Size: 5/16" Gauge: 2 AWG Package Qty: 2 Heat Shrink: No Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 091887254044 Quick Guide (pdf)

Read more less

16-14 Heatshrink Butt Connectors - 100-PackGuage Size: 16-14Quantity: 100Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage. UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 deg. F/125 deg. C. Operating temperature range 40 deg. C to 110 deg. C. ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire range: 16-14 mm: 1-2 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Type: Butt Connectors Package Qty: 100 Heat Shrink: Yes Box Dimensions: 2"H x 3"W x 8"L WT: 0.4 lbs UPC: 091887307962 Quick Guide (pdf)

Read more less

Tinned Lug 2/0 AWG - 1/2" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 2/0 AWG Stud Size: 1/2" Length (inch): 2.063" Width (inch): 0.813" Clearance (inch): 0.500" Package Size: Ten included Specifications: Gauge: 2/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/2" Type: Lugs Box Dimensions: 1"H x 4"W x 7"L WT: 0.45 lbs UPC: 840248205498 Quick Guide (pdf)

Read more less

Tinned Lug 2/0 AWG - 3/8" Stud Size - 2 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 2/0 AWG Stud Size: 3/8" Length (inch): 2.063" Width (inch): 0.813" Clearance (inch): 0.500" Package Size: Two included Specifications: Gauge: 2/0 AWG Heat Shrink: No Package Qty: 2 Post Size: 3/8" Type: Lugs Box Dimensions: 1"H x 1"W x 4"L WT: 0.35 lbs UPC: 840248205542 Quick Guide (pdf)

Read more less

2-Way Waterproof ConnectorFeatures: Pair of wire connectors with one (1) Male and one (1) Female connector ends each 18-gauge wire Waterproof *Sold as a Pair

Read more less

DT & DTP Deutsch Cavity Plug - 16 & 12 Contact Size - White (100 Pack)Cavity plugs are used to seal cavity openings in Deutsch connectors (DTM, DT, DTP Series). Using cavity plugs is essential to prevent contaminants from entering connectors. Utilizing cavity plugs will guarantee that the connectors remain environmentally sealed. Properly sealed connectors offer durability, reliability, and longevity. How do you use Cavity Plugs? Simply insert one into an empty cavity on a Deutsch connector creating a watertight seal. They couldn't be easier to handle. These cavity plugs are field-serviceable and easy to install. Not sure which size is right for your project? Contact a Pacer expert today with any questions that you may have.Features: Easy to install Field serviceable Applications: Cable-to-cable applications Enclosed connectors offer field-proven reliability and rugged quality Characteristics: Hand-insertable cavity plugs Operating temperature ranges from -55°C to 125°C Specifications: Contact Size: 16 & 12 Connector Series: DT, DTP Package Size: 100 Brochure (pdf)

Read more less

16-14 Gauge - 3/8" Heat Shrink Ring Terminal - 25-PackWire Range:16-14Screw Size:3/8"Quantity: 25Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Package Qty: 25 Heat Shrink: Yes Type: Ring Terminals Post Size: 3/8" Box Dimensions: 1"H x 4"W x 4"L WT: 0.2 lbs UPC: 091887313222 Quick Guide (pdf)

Read more less

16-14 Heatshrink Butt Connectors - 500-PackGuage Size: 16-14Quantity: 500Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage. UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 deg. F/125 deg. C. Operating temperature range 40 deg. C to 110 deg. C. ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire range: 16-14 mm: 1-2 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Butt Connectors Package Qty: 500 Heat Shrink: Yes Gauge: 16-14 AWG Box Dimensions: 3"H x 5"W x 8"L WT: 1.8 lbs UPC: 091887308242 Quick Guide (pdf)

Read more less

16-14 AWG Nylon Single Crimp Butt Connector - 100-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Butt Connectors Package Qty: 100 Heat Shrink: No Gauge: 16-14 AWG Box Dimensions: 1"H x 3"W x 5"L WT: 0.2 lbs UPC: 091887220049 Brochure (pdf)

Read more less

Heavy Duty Lugs - 6 Gauge Wire - 1/4" Post - 100-PackCable Gauge: 6Screw Size: 1/4" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Package Qty: 100 Post Size: 1/4" Heat Shrink: No Gauge: 6 AWG Type: Lugs Box Dimensions: 1"H x 6"W x 8"L WT: 1.25 lbs UPC: 091887249187 Quick Guide (pdf)

Read more less

8 AWG Heat Shrink Butt Connector - 100 PackButt splices are a type of connector used to safely connect one or more wires to another wire. Their economical pricing and ease of use make them common in electrical systems. Heat shrink butt splices create an environmentally sealed connection to handle harsh conditions. They are simple to use. First, make sure you have correctly stripped the wires to the proper length. Inside the butt splice, you will see an indentation your wires should butt up against. Be careful to make sure that the butt splice and the wire insulation are touching. Otherwise, you run the risk of damaging the wire due to exposure. So, the stripped wire is inserted into one side of the butt splice and crimped with the proper tool. This crimp bends the connector around the wire, creating a solid connection. Next, you simply repeat the process on the other side. Alternatively, you can crimp the other end, creating a dead end. Before you heat it, don't forget the tug test. Once your wire is properly crimped, apply heat to the butt splice working outward. Be careful not to burn the butt splice or the wire insulation. And now you've created a durable, environmentally protected connection. Remember, butt splices are useful for their rapid installation and durability. Other methods of connection may not offer the same level of protection.Terminals are a necessity for any electrical system. Heat shrink butt splices provide a rugged, environmentally sealed connection that is meant to last. These butt splices are designed for use with 8 AWG wires. How do you use 8 AWG heat shrink butt splices? You start by preparing your wires. This means cutting and stripping them to the correct length. Every butt splice has an internal indentation of it where your wires should meet. So now, you insert the wire into the butt splice, making sure the tip touches the indentation. Using the proper tool, you need to crimp the side of the butt splice, which creates a solid connection. Repeat the process on the other side of the butt splice. Next, perform a tug test to make sure that the wires do not pull out. After that, use the proper heat gun or torch to correctly heat the outer heat shrink. Why use 8 AWG heat shrink butt splices? Heat shrink butt splices offer the highest level of protection available. By using these splices, users are creating a moisture-proof seal that will last. Heat shrink butt splices protect connections from physical abuse and abrasion. They also protect from water, salt, and other corrosive compounds.Features: Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Provides strain relief Cost-effective Characteristics: Shrink ratio: Approx.: 3-1 at 135 °C Operating Temp: -55 °C -  125 °C Vol. Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Specifications: Wire Range: 8 AWG Insulation Color: Pink Max Wire Insulation Outer Diameter (inch): 0.35" Base Material: Tinned Copper Voltage Rating: 600-V Package Size: 100 Compliances: UL CSA RoHS Specifications: Gauge: 8 AWG Box Dimensions: 2"H x 5"W x 9"L WT: 1.3 lbs UPC: 840248206662 Brochure (pdf)

Read more less

16-14 AWG Fully-Insulated Male Disconnect Terminal - Blue - 100 PackCreating a solid connection is important in every part of an electrical system. Being able to disconnect and reconnect makes maintenance that much easier. With Pacer's heat shrink fully insulated disconnect terminals, users get the best of both worlds. Heat shrink terminals protect against the elements in the most challenging of environments. They offer the best moisture protection available. How do they do this? These heat shrink fully insulated disconnect terminals have a built-in heat-activated adhesive liner.This liner provides a rugged, environmentally sealed connection for wires from 22 AWG - 10 AWG. No longer will users need to worry about exposure to water, oil, gas, or other corrosive compounds. These terminals even protect connections from physical abuse and abrasion. Disconnects allow the user to easily separate the connection if needed. This makes removing a piece of equipment or completing field service maintenance a breeze. The insulation color indicates the wire gauge the terminal should be used on. Red insulation is for 22-18 AWG. Blue insulation is for 16-14 AWG. Yellow insulation is for 12-10 AWG. Selecting the correct heat shrink fully insulated disconnect terminal isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Protects terminations from water, condensation, salt spray and corrosion Added vibration protection in rugged environments Provides strain relief Characteristics: Shrink Ratio: Approx. 3:1 at 135 °C Operating Temp: -55 °C - 125 °C Vol. Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: AWG: 16-14 Disc./Bullet Size: 0.250 in. Insulation Color: Blue Package Size: 100 Compliances: UL CSA RoHS Specifications: Gauge: 16-14 AWG Box Dimensions: 2"H x 3"W x 8"L WT: 0.4 lbs UPC: 840248207607 Brochure (pdf)

Read more less

16-14 AWG Fully-Insulated Male Disconnect Terminal - Blue - 25 PackCreating a solid connection is important in every part of an electrical system. Being able to disconnect and reconnect makes maintenance that much easier. With Pacer's heat-shrink fully insulated disconnect terminals, users get the best of both worlds. Heat shrink terminals protect against the elements in the most challenging of environments. They offer the best moisture protection available. How do they do this? This heat-shrink fully insulated disconnect terminals have a built-in heat-activated adhesive liner.This liner provides a rugged, environmentally sealed connection for wires from 22 AWG - 10 AWG. No longer will users need to worry about exposure to water, oil, gas, or other corrosive compounds. These terminals even protect connections from physical abuse and abrasion. Disconnects allow the user to easily separate the connection if needed. This makes removing a piece of equipment or completing field service maintenance a breeze. The insulation color indicates the wire gauge the terminal should be used on. Red insulation is for 22-18 AWG. Blue insulation is for 16-14 AWG. Yellow insulation is for 12-10 AWG. Selecting the correct heat shrink fully insulated disconnect terminal isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Provides strain relief Characteristics: Shrink Ratio: Approx. 3:1 at 135 °C Operating Temp: -55 °C - 125 °C Vol. Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: AWG: 16-14 Disc./Bullet Size: 0.250 in. Insulation Color: Blue Package Size: 25 Compliances: UL CSA RoHS Specifications: Gauge: 16-14 AWG Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 840248207591 Brochure (pdf)

Read more less

22-18 AWG Fully-Insulated Male Disconnect Terminal - Red - 100 PackCreating a solid connection is important in every part of an electrical system. Being able to disconnect and reconnect makes maintenance that much easier. With Pacer's heat-shrink fully insulated disconnect terminals, users get the best of both worlds. Heat shrink terminals protect against the elements in the most challenging of environments. They offer the best moisture protection available. How do they do this? This heat-shrink fully insulated disconnect terminals have a built-in heat-activated adhesive liner.This liner provides a rugged, environmentally sealed connection for wires from 22 AWG - 10 AWG. No longer will users need to worry about exposure to water, oil, gas, or other corrosive compounds. These terminals even protect connections from physical abuse and abrasion. Disconnects allow the user to easily separate the connection if needed. This makes removing a piece of equipment or completing field service maintenance a breeze. The insulation color indicates the wire gauge the terminal should be used on. Red insulation is for 22-18 AWG. Blue insulation is for 16-14 AWG. Yellow insulation is for 12-10 AWG. Selecting the correct heat shrink fully insulated disconnect terminal isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Provides strain relief Characteristics: Shrink Ratio: Approx. 3:1 at 135 °C Operating Temp: -55 °C - 125 °C Vol. Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: AWG: 22-18 Disc./Bullet Size: 0.250 in. Insulation Color: Red Package Size: 100 Compliances: UL CSA RoHS Specifications: Gauge: 22-18 AWG Box Dimensions: 2"H x 3"W x 8"L WT: 0.4 lbs UPC: 840248207669 Brochure (pdf)

Read more less

22-18 AWG Fully-Insulated Male Disconnect Terminal - Red - 25 PackCreating a solid connection is important in every part of an electrical system. Being able to disconnect and reconnect makes maintenance that much easier. With Pacer's heat-shrink fully insulated disconnect terminals, users get the best of both worlds. Heat shrink terminals protect against the elements in the most challenging of environments. They offer the best moisture protection available. How do they do this? This heat-shrink fully insulated disconnect terminals have a built-in heat-activated adhesive liner.This liner provides a rugged, environmentally sealed connection for wires from 22 AWG - 10 AWG. No longer will users need to worry about exposure to water, oil, gas, or other corrosive compounds. These terminals even protect connections from physical abuse and abrasion. Disconnects allow the user to easily separate the connection if needed. This makes removing a piece of equipment or completing field service maintenance a breeze. The insulation color indicates the wire gauge the terminal should be used on. Red insulation is for 22-18 AWG. Blue insulation is for 16-14 AWG. Yellow insulation is for 12-10 AWG. Selecting the correct heat shrink fully insulated disconnect terminal isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Provides strain relief Characteristics: Shrink Ratio: Approx. 3:1 at 135 °C Operating Temp: -55 °C - 125 °C Vol. Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: AWG: 22-18 Disc./Bullet Size: 0.250 in. Insulation Color: Red Package Size: 25 Compliances: UL CSA RoHS Specifications: Gauge: 22-18 AWG Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 840248207652 Brochure (pdf)

Read more less

22-18 AWG Nylon Single Crimp Butt Connector - 100-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Butt Connectors Package Qty: 100 Heat Shrink: No Gauge: 22-18 AWG Box Dimensions: 1"H x 3"W x 5"L WT: 0.2 lbs UPC: 091887220025 Brochure (pdf)

Read more less

16-14 AWG - #8 Nylon Flanged Spade Terminal - 100-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Spade connectors Package Qty: 100 Post Size: #8 Heat Shrink: No Gauge: 16-14 AWG Box Dimensions: 1"H x 3"W x 5"L WT: 0.3 lbs UPC: 091887223323 Brochure (pdf)

Read more less

Heavy Duty Lugs - 3/0 Gauge Wire - 5/16" Post - 10-PackCable Gauge: 3/0Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Post Size: 5/16" Package Qty: 10 Heat Shrink: No Gauge: 2/0 AWG Box Dimensions: 1"H x 3"W x 4"L WT: 0.7 lbs UPC: 091887248029 Quick Guide (pdf)

Read more less

12-10 Gauge - #8 Heat Shrink Ring Terminal - 100-PackGauge Size: 12-10Screw Size: #8Quanitity: 100Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage. UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 deg. F/125 deg. C. Operating temperature range 40 deg. C to 110 deg. C. ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire Range: 12-10 mm: 3-5 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Type: Ring Terminals Package Qty: 100 Heat Shrink: Yes Box Dimensions: 1"H x 3"W x 8"L WT: 0.4 lbs UPC: 091887316063 Quick Guide (pdf)Brochure (pdf)

Read more less

12-10 AWG - 3/8" Nylon Ring Terminal - 100-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Ring Terminals Post Size: 3/8" Package Qty: 100 Heat Shrink: No Gauge: 12-10 AWG Box Dimensions: 2"H x 3"W x 8"L WT: 0.8 lbs UPC: 091887222029 Brochure (pdf)

Read more less

12-10 Heatshrink Butt Connectors - 25-PackGauge Size: 12-10Quantity: 25Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage. UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 deg. F/125 deg. C. Operating temperature range 40 deg. C to 110 deg. C. ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire range: 12-10 mm: 3-5 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Type: Butt Connectors Package Qty: 25 Heat Shrink: Yes Box Dimensions: 1"H x 4"W x 4"L WT: 0.2 lbs UPC: 091887308006 Quick Guide (pdf)

Read more less

22-18 Male Heatshrink Disconnect - 100-PackFeatures: ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire Range: 22-18/.250 Size: 0.3-0.8mm/6.4mm Gender: Male Qty/Pkg: 100WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 22-18 AWG Package Qty: 100 Heat Shrink: Yes Type: Disconnects Box Dimensions: 2"H x 3"W x 4"L WT: 0.3 lbs UPC: 091887318616 Quick Guide (pdf)Brochure (pdf)

Read more less

90° Tinned Copper Lug #2 - 3/8" - 2-Piece90° bend for ease of wire routing. Specifications: Type: Lugs Post Size: 3/8" Package Qty: 2 Heat Shrink: No Gauge: 2 AWG Box Dimensions: 1"H x 2"W x 3"L WT: 0.05 lbs UPC: 091887991765

Read more less

22-18 Gauge - 1/4" Heat Shrink Ring Terminal - 25-PackWire Range:22-18Screw Size: 1/4"Quantity: 25Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Post Size: 1/4" Package Qty: 25 Heat Shrink: Yes Type: Ring Terminals Gauge: 22-18 AWG Box Dimensions: 1"H x 4"W x 4"L WT: 0.2 lbs UPC: 091887310757 Quick Guide (pdf)

Read more less

12-10 Gauge - #8 Heat Shrink Ring Terminal - 3-PackGauge Size: 12-10Screw Size: #8Quantity: 3Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage. UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 deg. F/125 deg. C. Operating temperature range 40 deg. C to 110 deg. C. ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire Range: 12-10 mm: 3-5 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Heat Shrink: Yes Type: Ring Terminals Post Size: #8 Package Qty: 3 Gauge: 12-10 AWG Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 091887316025 Quick Guide (pdf)

Read more less

12-10 Gauge Heat Shrink Step-Down Multi-Wire Connectors - 3-PackAncor's assortment of adhesive lined heat shrink butt connectors can be used as a step-down from one gauge size to another or as a multi-wire connector for one gauge size wire. These connectors offer a sealed alternative for products such as a quick-tap or 3-way connector in areas where corrosion is a concern.Features: 4:1 shrink ratio tubing to ensure a watertight seal between wires Flared barrel with uniform copper wall ensures an easy and proper mechanical crimp Crimp indicator on barrel for proper placement of installation tool Clear heat shrink tubing ensures crimp accuracy Colored stripes on the barrel indicate which crimp die to use, regardless of application WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Type: Butt Connectors Package Qty: 3 Heat Shrink: Yes Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 091887983326 Quick Guide (pdf)

Read more less

DTP Deutsch Plug Repair Kit - 14-12 AWG (4 Position)DTP Series Deutsch Connectors are the solution for power application requirements. The DTP line was developed to handle the need for higher amperage, multi-pin economical connectors.  Each circuit is capable of continuous 25 amp service.  Deutsch solid contacts (14-12 AWG) are included in the packs. Contact a Pacer expert with any questions that you may have.Features: 14-12 AWG applications  25 Amp continuous power Specifications: Number of Cavities (Positions): 4 Contents: (1) 4 pos. plug, (1) 4 pos. wedge lock, (5) stamped and formed contacts Brochure (pdf)

Read more less

DTP Deutsch Receptacle Repair Kit - 14-12 AWG (2 Position)DTP Series Deutsch Connectors are the solution for power application requirements. The DTP line was developed to handle the need for higher amperage, multi-pin economical connectors.  Each circuit is capable of continuous 25 amp service.  Deutsch solid contacts (14-12 AWG) are included in the packs. Contact a Pacer expert with any questions that you may have.Features: 14-12 AWG applications  25 Amp continuous power Specifications: Number of Cavities (Positions): 2 Contents: (1) 2 pos. receptacle, (1) 2 pos. wedge lock, (2) stamped and formed pins Brochure (pdf)

Read more less

DTP Deutsch Receptacle Repair Kit - 14-12 AWG (4 Position)DTP Series Deutsch Connectors are the solution for power application requirements. The DTP line was developed to handle the need for higher amperage, multi-pin economical connectors.  Each circuit is capable of continuous 25 amp service.  Deutsch solid contacts (14-12 AWG) are included in the packs. Contact a Pacer expert with any questions that you may have.Features: 14-12 AWG applications  25 Amp continuous power Specifications: Number of Cavities (Positions): 4 Contents: (1) 4 pos. receptacle, (1) 4 pos. wedge lock, (4) stamped and formed pins Brochure (pdf)

Read more less

DTP Deutsch Plug Repair Kit - 14-12 AWG (2 Position)DTP Series Deutsch Connectors are the solution for power application requirements. The DTP line was developed to handle the need for higher amperage, multi-pin economical connectors.  Each circuit is capable of continuous 25 amp service.  Deutsch solid contacts (14-12 AWG) are included in the packs. Contact a Pacer expert with any questions that you may have.Features: 14-12 AWG applications  25 Amp continuous power Specifications: Number of Cavities (Positions): 2 Contents: (1) 2 pos. plug, (1) 2 pos. wedge lock, (3) stamped and formed contacts Brochure (pdf)

Read more less

15A Euro Style Terminal Block - 12 Gang - 5 PackPacer's European terminal blocks are constructed from 6/6 nylon and incorporate tin-plated brass inserts for corrosion resistance. They also carry wire protectors to prevent stranded wire from being damaged during the installation process. This 15A Pacer European terminal block has 14 AWG max.Features: 15 AMP, 300V, 14 AWG max 12 positions Each European terminal block is built to handle the harshest marine conditions Recessed screws and terminals to avoid shock hazards Closed-back design to prevent moisture intrusion Easily cut Compliances: UL Recognized CSA Certified Characteristics: Constructed from 6/6 nylon Tin-plated brass inserts Applications: Distributing voltage and power to smaller circuits Combining grounds in an electrical system Specifications: Package Qty: 5 Box Dimensions: 1"H x 1"W x 4"L WT: 0.05 lbs UPC: 840248215923

Read more less

20A Euro Style Terminal Block - 12 Gang - 5 PackPacer's European terminal blocks are constructed from 6/6 nylon and incorporate tin-plated brass inserts for corrosion resistance. They also carry wire protectors to prevent stranded wire from being damaged during the installation process. This 20A Pacer European terminal block has 12 AWG max.Features: 20 AMP, 300V, 12 AWG max 12 positions Each European terminal block is built to handle the harshest marine conditions Recessed screws and terminals to avoid shock hazards Closed-back design to prevent moisture intrusion Easily cut Compliances: UL Recognized CSA Certified Characteristics: Constructed from 6/6 nylon Tin-plated brass inserts Applications: Distributing voltage and power to smaller circuits Combining grounds in an electrical system Specifications: Package Qty: 5 Box Dimensions: 1"H x 1"W x 6"L WT: 0.4 lbs UPC: 840248215947 Quick Guide (pdf)

Read more less

6-Pin Deutsch Connector Wiring HarnessThese two 6-pin wiring harnesses are perfect for users who need to mount two Roswell speakers. Features: 6-pin Deutsch connector on one end and bare wires on the other end *Sold as a pair

Read more less

Heavy Duty Lugs - 4/0 Gauge Wire - 3/8" Post - 2-PackCable Gauge: 4/0Screw Size: 3/8" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Post Size: 3/8" Package Qty: 2 Heat Shrink: No Gauge: 4/0 AWG Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 091887259049 Quick Guide (pdf)

Read more less

Tinned Lug 8 AWG - 1/4" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 8 Stud Size: 1/4” Length: 1.187” Width: 0.438” Clearance: 0.344” Package Size: 10 Specifications: Gauge: 8 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/4" Type: Lugs Box Dimensions: 1"H x 3"W x 4"L WT: 0.2 lbs UPC: 840248205931 Brochure (pdf)

Read more less

Tinned Lug 8 AWG - #10 Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 8 Stud Size: #10 Length: 1.187” Width: 0.438” Clearance: 0.344” Package Size: 10 Specifications: Gauge: 8 AWG Heat Shrink: No Package Qty: 10 Post Size: #10 Type: Lugs Box Dimensions: 1"H x 5"W x 9"L WT: 0.15 lbs UPC: 840248209861 Brochure (pdf)

Read more less

12-10 Gauge - #8 Heat Shrink Ring Terminal - 25-PackGauge Size: 12-10Screw Size: #8Quantity: 25Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage. UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 deg. F/125 deg. C. Operating temperature range 40 deg. C to 110 deg. C. ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire Range: 12-10 mm: 3-5 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Ring Terminals Post Size: #8 Package Qty: 25 Heat Shrink: Yes Gauge: 12-10 AWG Box Dimensions: 1"H x 4"W x 4"L WT: 0.2 lbs UPC: 091887316049 Quick Guide (pdf)

Read more less