Battery Cable Heavy Wall Heat Shrink Tubing - 3/4" x 12" - Red (3-Pieces)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 12"L WT: 0.3 lbs UPC: 840248214421 Brochure (pdf)

Read more less

Battery Cable Heat Shrink Tubing - 1/4" x 3" - Black/Red (2-Pieces Combo Pack)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 4"L WT: 0.03 lbs UPC: 840248214544 Brochure (pdf)

Read more less

Battery Cable Heat Shrink Tubing - 1/2" x 3" - Black/Red (2-Pieces Combo Pack)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 4"L WT: 0.03 lbs UPC: 840248214490 Brochure (pdf)

Read more less

Starlink® Compatible Horizontal Cable Seal - GreyDesigned for a range of Starlink®, NMEA, and RJ45 cable and connector diameters, the DS-HSL-01 Horizontal Cable Seal provides a clean, reliable cable routing solution for rooftop installations.The supplied split pre-drilled bungs allow cables with connectors already attached to pass through the seal, removing the need to cut and re-terminate connectors during installation. Multiple bung sizes and a self-drill option allow installers to customize the fit while maintaining a watertight seal easily.Based on our most popular horizontal cable seal design, the low-profile construction is impact-resistant and offers additional protection against water ingress. The horizontal cable entry keeps the cable exit as close as possible to the mounting surface, creating a neat, professional installation.Suitable for cables ranging from 2-8 mm (0.07”-0.31”), the DS-HSL-01 is ideal not only for Starlink installations but also for solar panels, light bars, lighting, and other rooftop electronics.Marine Grade MaterialsManufactured from premium UV-stable, hard-wearing materials, the DS-HSL-01 is built for long-term outdoor performance. Rated IP68, it delivers a guaranteed 100% watertight seal in demanding marine and outdoor environments.Easy InstallationCaptive nuts ensure a fast and reliable installation while allowing repeat fitting if required. The easy-fit cable routing system helps reduce installation time and delivers a clean, professional finish.Specifications: Material: High Impact Plastic  Height: 29mm (1.14”) Length: 88mm (3.46”) Color: Grey Cable Compatibility: Starlink Performance (Gen 3), Starlink Enterprise (Gen 3), Standard (Gen 3), Mini, NMEA cables, RJ45 cables Max Connector size: 16mm (0.62”) Bungs: 2-3mm (0.07-0.11”) / 4-5mm (0.15-0.19”) / 6-7mm (0.23-0.28”) / 7-8mm (0.28-0.31”) / 1 x Self Drill Specifications: Type: Electric Box Dimensions: 2"H x 4"W x 9"L WT: 0.3 lbs UPC: 5061093900320 Quick Guide (pdf)Brochure (pdf)

Read more less

Starlink® Compatible Horizontal Cable Seal - BlackDesigned for a range of Starlink®, NMEA, and RJ45 cable and connector diameters, the DS-HSL-01-BLK Horizontal Cable Seal provides a clean, reliable cable routing solution for rooftop installations.The supplied split pre-drilled bungs allow cables with connectors already attached to pass through the seal, removing the need to cut and re-terminate connectors during installation. Multiple bung sizes and a self-drill option allow installers to customize the fit while maintaining a watertight seal easily.Based on our most popular horizontal cable seal design, the low-profile construction is impact-resistant and offers additional protection against water ingress. The horizontal cable entry keeps the cable exit as close as possible to the mounting surface, creating a neat, professional installation.Suitable for cables ranging from 2–8 mm (0.07”–0.31”), the DS-HSL-01-BLK is ideal not only for Starlink installations but also for solar panels, light bars, lighting, and other rooftop electronics.Marine Grade MaterialsManufactured from premium UV-stable, hard-wearing materials, the DS-HSL-01-BLK is built for long-term outdoor performance. Rated IP68, it delivers a guaranteed 100% watertight seal in demanding marine and outdoor environments.Easy InstallationCaptive nuts ensure a fast and reliable installation while allowing repeat fitting if required. The easy-fit cable routing system helps reduce installation time and delivers a clean, professional finish.Specifications: Material: High Impact Plastic  Height: 29mm (1.14”) Length: 88mm (3.46”) Colour: Black Cable Compatibility: Starlink Performance (Gen 3), Starlink Enterprise (Gen 3), Standard (Gen 3), Mini, NMEA cables, RJ45 cables Max Connector size: 16mm (0.62”) Bungs: 2-3mm (0.07-0.11”) / 4-5mm (0.15-0.19”) / 6-7mm (0.23-0.28”) / 7-8mm (0.28-0.31”) / 1 x Self Drill Specifications: Type: Electric Box Dimensions: 2"H x 4"W x 9"L WT: 0.3 lbs UPC: 5061093900337 Quick Guide (pdf)Brochure (pdf)

Read more less

DS-H6-BLK Horizontal Cable Seal - Black *3-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installtion. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Three (3) Pack Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.45 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

DS-H6-BLK Horizontal Cable Seal - BlackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.16 lbs UPC: 5060114797390 Quick Guide (pdf)Brochure (pdf)

Read more less

SB-8-5 Junction BoxScanstrut's SB-8-5 Junction Box is perfect for installations if you need to create a waterproof connection for multiple electrical cables.Heavy-duty junction box manufactured from marine grade polypropylene and with features 5 screw-down terminals.Depending on the number of terminations required the terminal blocks can be individually fitted or blocked together.  Supplied with 5 modular terminal blocks.  Offering 5 terminations.Cables push fit into the terminals and are secured with a sprung leaf retention system that does not damage the wire.  The terminal can be removed for easy fitting of cables. Features: Provides 5 screw-down terminals. Capacity for up to eight (8) cables to enter the box. Watertight Installation - Cables are quickly routed into the box through an IP66 elastomeric membrane, guaranteeing protection against water ingress. Upgradable to IP68 with use of SB-2G Cable Seals (sold separately)  Technical Specifications: Maximum cable size (diameter) - .50" (12 mm)   Maximum wire size - 16/1.5 to 11/4 Dimensions (L x W x H) - 3.35" x 3.35" x 2" (85  x 85 x 50 mm) Five (5) terminal block w/400 V rating and 32 A Color - Grey Material - Marine grade polypropylene In the Box: Junction box w/five (5) screw-down terminal block Mounting hardware Installation manual *Sold as an Individual Specifications: Type: Junction Box Box Dimensions: 3"H x 5"W x 7"L WT: 0.3 lbs UPC: 5060114793439 Quick Guide (pdf)Brochure (pdf)

Read more less

Heavy Wall Heat Shrink Tubing - 3/4" x 3" - 3-Pack - RedPackage of 3 Red 3"(7.6cm) long sections with a 3/4"(19mm) diameter that shrinks to 1/4"(6.4mm)Wire Range: 8-2/0 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief 3:1 Ratio Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 5"L WT: 0.07 lbs UPC: 091887328400

Read more less

Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 12" - 5-Pack - RedPackage of 5 Red 12"(30.5cm) long sections with a 1/2"(12.7mm) diameter that shrinks to 5/32"(4mm)Wire Range: 8-4 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 12"L WT: 0.2 lbs UPC: 091887974027

Read more less

Self-Extinguishing Split Loom 3/8" x 10'Features: Permits flexible routing of cable harnesses Provides abrasion protection for wire and cable Allows lead-outs at any point for the greatest ease of installation Split loom temperature range is -40°F to 275°F / -40°C to 135°C WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 2"H x 5"W x 7"L WT: 0.13 lbs UPC: 091887967470

Read more less

Adhesive Lined Heat Shrink Tubing (ALT) - 1/4" x 6" - 10-Pack - RedPackage of 10 Red 6"(15.2cm) long sections with a 1/4"(6.4mm) diameter that shrinks to 5/64"(2mm)Wire Range: 16-10 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 8"L WT: 0.06 lbs UPC: 091887973907

Read more less

DS-MULTI Cable Seal Plastic - BlackDesigned to provide a quick and easy installation for multiple cables. Supplied with an undrilled seal allowing you to custom-drill holes to match your cable requirements. Designed for multiple cables up to Ø15mm (0.59"), DS-MULTI-P-BLK is perfect for solar panels, lights, and other rooftop electronics. Constructed from high-impact plastic, DS-MULTI-P-BLK is UV- stable and hard-wearing providing a 100% watertight seal no matter the weather. Features: IP68 Waterproof Designed to fit multiple cables up to 15mm (0.59") in diameter UV resistant Supplied with undrilled bungs and made from marine-grade black high-impact plastic No messy sealant on the bung Easy-fit cable routing that cuts down your installation time A guaranteed 100% watertight seal Designed for a range of cable diameters making it ideal for almost every installation Perfect for solar panels, light bars, lights, and other rooftop electronics Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.3 lbs UPC: 5060114798380 Brochure (pdf)

Read more less

DS-H10-BLK Horizontal Cable Seal- Black *3-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .24" to .39" (6 - 10 mm)   Height - 1.06" (27 mm) Width - 1.75" (44.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Three (3) Pack Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 9"L WT: 1.05 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

DS21A-S Vertical Cable Seal - Stainless SteelScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) - .17" to .31" (4 - 9 mm)   Fits connector size up to .83" (21 mm) in diameter  Height - .81" (20.5 mm) Color - Stainless Orientation - Vertical Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 6"L WT: 0.4 lbs UPC: 5060114792791 Quick Guide (pdf)Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 1/2" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 1/2” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 3"W x 3"L WT: 0.3 lbs UPC: 840248216258 Brochure (pdf)

Read more less

 Stainless Steel C-Clamp with Neoprene Cushion - 5/8" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 5/8” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 3"W x 4"L WT: 0.3 lbs UPC: 840248216265 Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 3/8" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 3/8” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 4"W x 4"L WT: 0.3 lbs UPC: 840248216241 Brochure (pdf)

Read more less

Heat Shrink Tubing 3/4" x 48" - Yellow - 1 PiecesHeat activated adhesive lining creates a superior water, oil, and acid resistant seal. Most shrink tubing on the market reduces to a 2:1 ratio, Ancor tubing shrinks to 3:1 which allows a wider range of applications for each tubing size. Features: Diameter: 3/4" Shrinks To: 1/4" Color: Yellow Per Package: 1 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 1"W x 48"L WT: 0.15 lbs UPC: 091887808568

Read more less

Polished Stainless Steel Cable Seal - 2 Cables (2-15mm Each)The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Deck Seal Box Dimensions: 1"H x 5"W x 8"L WT: 0.4 lbs UPC: 015568068454 Quick Guide (pdf)Brochure (pdf)

Read more less

Horizontal Double-Entry Cable Seal - Grey - Multiple Cable CombinationsThe DS-HD10 double horizontal cable seal was designed to eliminate time-consuming and sub-standard routing of cables for rooftop lights and electronics. Scanstrut’s seal helps users achieve a sleek, easy-to-fit, and 100% watertight installation every time. Features: Designed for two cables IP68 watertight seal Compact footprint - just 66.5mm (2.61 in.) W / 75.1mm (2.95 in.) L / 28.5 mm (1.12 in.) H Easy-fit cable routing that cuts down the installation time through wood, metal, and GRP Grey high-impact plastic Includes 316 stainless steel fixings and a waterproof 3M gasket The low-profile construction is impact-resistant and provides extra protection from water Scanstrut’s materials have been selected to be UV-stable and hard-wearing No messy sealant on bungs Install 2 Cables – Select Any Combination: 6mm x 2 7mm x 2 8mm x 2 9mm x 2 10mm x 2 Blank x 2 Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.35 lbs UPC: 5060114799004

Read more less

DS30-SL Starlink Cable Seal - GreyThe perfect cable seal to elevate your Starlink installation. This vertical entry cable seal, now compatible with Starlink, is IP68 certified and accommodates an 8.5mm (0.34") cable and a connector of Ø30mm (1.18") in diameter.Designed with ease of installation, the split bung ensures no wire cutting is required. The aesthetic dome-shaped profile provides a stronger, impact-resistant design, and captive nuts in the base make assembly easy.Multi-Functional Dome ShapeThe aesthetic dome-shaped profile provides a stronger, impact-resistant, and additional water shield.Watertight InstallationThe tapered bung is supplied with a closed base seal to form a watertight seal, ensuring an IP68-rated watertight seal.Easy & Reliable InstallationCaptive nuts make for easy assembly and allow reliable repeat installations. Each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.Split BungsThe split-seal option makes installation even easier, as it does not require the connectors to be removed during installation.Features: IP68 waterproof rated Made from premium marine-grade UV-stable materials Includes 316 stainless steel fixings and a waterproof 3M gasket Captive nuts ensure an easy and reliable repeat installation No messy sealant on bungs Split bungs for ease of installation Install connectors up to Ø30mm (1.18") in diameter Fully customizable with self-drill bung options 2 bungs - 1x blank & 1x 8.5mm (0.34”) Specifications: Material: High Impact Plastic  Height: 20.5mm (0.81") Color: Grey Diameter of Cable Seal: 59mm (2.32") Diameter of Connector: Ø30mm (1.18") Bungs: 1 x blank / 1 x 8.5 mm (0.34") Compatible with: Flat High Performance / Performance (Gen 2) High Performance / Performance (Gen 1) Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 8"L WT: 0.25 lbs UPC: 5060114799707 Quick Guide (pdf)Brochure (pdf)

Read more less

Adhesive Lined Heat Shrink Tubing (ALT) - 3/16" x 6" - 10-Pack - BlackPackage of 10 Black 6"(15.2cm) long sections with a 3/16"(4.8mm) diameter that shrinks to 1/16"(1.6mm)Wire Range: 20-12 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 8"L WT: 0.07 lbs UPC: 091887301168

Read more less

Adhesive Lined Heat Shrink Tubing (ALT) - 3/4" x 12" - 4-Pack - RedPackage of 4 Red 12"(30.5cm) long sections with a 3/4"(19mm) diameter that shrinks to 1/4"(6.4mm)Wire Range: 8-2/0 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 2"H x 3"W x 15"L WT: 0.2 lbs UPC: 091887308198

Read more less

Adhesive Lined Heat Shrink Tubing (ALT) - 1" x 12" - 3-Pack - BlackPackage of 3 Black 12"(30.5cm) long sections with a 1"(25.4mm) diameter that shrinks to 5/16"(7.9mm)Wire Range: 2-4/0 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 4"W x 12"L WT: 0.18 lbs UPC: 091887306767

Read more less

Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 12" - 5-Pack - RedPackage of 5 Red 12"(30.5cm) long sections with a 3/8"(9.5mm) diameter that shrinks to 1/8"(3.2mm)Wire Range: 12-8 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 0"H x 4"W x 12"L WT: 0.08 lbs UPC: 091887304640

Read more less

Adhesive Lined Heat Shrink Tubing (ALT) - 3/4" x 48" - 1-Pack - RedPackage of 1 Red 48"(122cm) long sections with a 3/4"(19mm) diameter that shrinks to 1/4"(6.4mm)Wire Range: 8-2/0 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 1"W x 48"L WT: 0.2 lbs UPC: 091887808537

Read more less

Heavy Wall Heat Shrink Tubing - 1" x 48" - 1-Pack - RedPackage of 1 Red 48"(122cm) long sections with a 1"(25mm) diameter that shrinks to 3/8"(9mm)Wire Range: 2-4/0 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief 3:1 Ratio Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 1"W x 48"L WT: 0.2 lbs UPC: 091887809367

Read more less

Stainless Steel Cushion Clamp - 1" - 10-PackNominal Diameter:1" (25mm)Thickness: 0.06Width: 1/2" (13mm)Screw Size: #10 Prevents corrosion Resistant to oils, acids, saltwater Temperatures range from -50° to 300°F Absorbs shock and vibration Reduces unwanted noise 1/4" clearance mounting hole WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cusion Clamp Box Dimensions: 2"H x 3"W x 8"L WT: 0.41 lbs UPC: 091887403893

Read more less

Battery Cable Heavy Wall Heat Shrink Tubing - 3/4" x 12" - Black (3-Pieces)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 12"L WT: 0.1 lbs UPC: 840248214414 Brochure (pdf)

Read more less

Horizontal Double Cable Seal - BlackThe DS-HD10-BLK double horizontal cable seal was designed to eliminate time-consuming and sub-standard routing of cables for rooftop lights and electronics. The seal helps you achieve a sleek, easy-to-fit, and 100% watertight installation every time. Perfect for routing two cables externally to internally on the roof of boats. Its low-profile design provides the best water ingress protection in class.Features: Designed for two cables IP68 watertight seal Compact footprint - just 66.5mm (2.61”) W / 75.1mm (2.95”) L / 28.5 mm (1.12”) H Easy-fit cable routing that cuts down your installation time through wood, metal, and GRP Black high-impact plastic Includes 316 stainless steel fixings and a waterproof 3M gasket The low-profile construction is impact-resistant and provides extra protection from water The materials have been selected to be UV- stable and hard-wearing No messy sealant on bungs Install 2 cables – select any combination: 6mm x 2 7mm x 2 8mm x 2 9mm x 2 10mm x 2 Blank x 2 Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.4 lbs UPC: 5060114798243 Brochure (pdf)

Read more less

DS-H10-BLK Horizontal Cable Seal - BlackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .24" to .39" (6 - 10 mm)   Height - 1.06" (27 mm) Width - 1.75" (44.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 9"L WT: 0.35 lbs UPC: 5060114797406 Quick Guide (pdf)Brochure (pdf)

Read more less

DS-H10 Horizontal Cable Seal - GreyThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.  The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .24" to .39" (6 - 10 mm)   Height - 1.06" (27 mm) Width - 1.75" (44.5 mm) Color - Grey Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 8"L WT: 0.3 lbs UPC: 5060114796072 Quick Guide (pdf)Brochure (pdf)

Read more less

Battery Cable Heat Shrink Tubing - 1/4" x 12" - Red (10-Pieces)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 1"W x 12"L WT: 0.08 lbs UPC: 840248214520 Brochure (pdf)

Read more less

Battery Cable Heat Shrink Tubing - 3/8" x 12" - Red (5-Pieces)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 2"W x 12"L WT: 0.08 lbs UPC: 840248214773 Brochure (pdf)

Read more less

6" UV Black Mounting Cable Zip Ties - 100 PackAncor offers a wide variety of materials, styles, and sizing options. A DoubleLock design offers increased tensile strength that is 33% stronger than the industry standard cable tie. With a unique design and high-quality construction, Marinco cable ties provide a great solution for bundling wire, cable, hoses, cords and countless other applications.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cable Ties Box Dimensions: 2"H x 4"W x 7"L WT: 0.17 lbs UPC: 093344050282

Read more less

Stainless Steel Cushion Clamps - 1-1/2" - 10-PackStainless steel cushion clamps prevent corrosion and are resistant to oils, acids and salt water.Features: Temperatures range from -50° to 300° F Absorbs shock and vibration Reduces unwanted noise 1/4" clearance mounting hole WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cusion Clamp Box Dimensions: 2"H x 6"W x 9"L WT: 0.8 lbs UPC: 091887808438

Read more less

Battery Cable Heat Shrink Tubing - 3/4" x 12" - Red (4-Pieces)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 4"W x 13"L WT: 0.1 lbs UPC: 840248214704 Brochure (pdf)

Read more less

Battery Cable Heat Shrink Tubing - 1" x 12" - Red (3-Pieces)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 2"H x 4"W x 13"L WT: 0.25 lbs UPC: 840248214599 Brochure (pdf)

Read more less

Battery Cable Heat Shrink Tubing - 1" x 12" - Yellow (3-Pieces)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 2"H x 4"W x 13"L WT: 0.35 lbs UPC: 840248214605 Brochure (pdf)

Read more less

Battery Cable Heat Shrink Tubing - 1/2" x 12" - Red (5-Pieces)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 12"L WT: 0.11 lbs UPC: 840248214476 Brochure (pdf)

Read more less

DS30-P-BLK Vertical Cable Seal - BlackScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) - .35" to .55" (9 - 14 mm)   Fits connector size up to 1.18" (30 mm) in diameter  Height - .81" (20.5 mm) Color - Black Orientation - Vertical Material - ASA Plastic In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 9"L WT: 0.35 lbs UPC: 5060114797376 Quick Guide (pdf)Brochure (pdf)

Read more less

Marine Grade Electrical Wire Seal - Round Cable, 18 to 10 AWG, 3/8" NPTMade of Nylon 6/6 flame resistant, self extinguishing Buna-N form seal. All seals exceed NMEA 4 x or 6 specs. Overlapping clamping spines allow for superior pull-out protection and resistance. Strain relief fittings are resistant to salt water and acid.Features: Round Cable 18 to 10-Gauge/AWG 3/8" NPT WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Deck Seal Box Dimensions: 1"H x 2"W x 4"L WT: 0.1 lbs UPC: 091887803976 Brochure (pdf)

Read more less

14" UV Black Standard Cable Zip Ties - 100 PackAncor offers a wide variety of materials, styles, and sizing options. A DoubleLock design offers increased tensile strength that is 33% stronger than the industry standard cable tie. With a unique design and high-quality construction, Marinco cable ties provide a great solution for bundling wire, cable, hoses, cords and countless other applications.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cable Ties Box Dimensions: 2"H x 3"W x 15"L WT: 0.5 lbs UPC: 093344501524

Read more less

Adhesive Lined Mounting Base UVB UV Resistant - 25-PackPatented, DoubleLock design offers increased tensile strength. Made from pure nylon for maximum life, and are impervious to salt, chemical solvents, and acids.

Read more less

DS-Multi Vertical Cable Seal Cable seals are designed to enable easy installation of electronics on board, providing a neat and stylish way of passing cables through the decks.  The durable IP68 rated Multi Deck Seal has been designed to fit multiple cables up to .71" (15 mm) in diameter is designed to save space and provide protection from water ingress, even during extreme weather conditions and heavy seas. Unlike Scanstrut's current Deck Seal range, the new Multi Deck Seal comes un-drilled to ensure a selection of cables can be fitted.  The installation process is simple and reliable, requiring a small hole to be drilled through the seal.Manufactured using marine grade aluminium with a hard finish to resist impact marks, the Multi Deck Seal unit has a waterproof base seal and an aesthetic low profile to prevent those on board from stubbing their toes.Features: Watertight installation - 100% waterproof with an IP68 rating Supplied with undrilled bungs and made from marine grade machined aluminum with a hard finish to resist impact marks.  Multi-Functional Shape - the aesthetic shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) up to - .6" (15 mm)   Height - .7" (17 mm) Color - Grey Orientation - Vertical Material - Aluminum  In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 8"L WT: 0.3 lbs UPC: 5060114793309 Quick Guide (pdf)Brochure (pdf)

Read more less

Heavy Wall Heat Shrink Tubing - 1" x 12" - 2-Pack - BlackPackage of 2 Black 12"(30.5cm) long sections with a 1"(25mm) diameter that shrinks to 3/8"(9mm)Wire Range: 2-4/0 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief 3:1 Ratio Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 12"L WT: 0.15 lbs UPC: 091887328905

Read more less

Marine Grade Electrical Wire Seal - Flat Cable, 14/3 to 12/3 AWG, 1/2" NPTLiquid Tight Wire Seals provide low cost watertight cable entries into panels and junction boxes. UL and CSA approved to work with flat cable. Resistant to saltwater, gasoline, alcohol, ketones and mineral oil. Safe underwater to 300ft. (150 PSIG).Features: Flat Cable AWG Range: 14/3 to 12/3 NPT Size: 1/2" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Deck Seal Box Dimensions: 1"H x 2"W x 4"L WT: 0.05 lbs UPC: 091887807561 Brochure (pdf)

Read more less