Panel-Mounted Battery Mini Selector SwitchPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution. Compact, lightweight Countersunk recesses for surface mount application Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole) Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictions Standard interchange label system Molded in high temperature, fiber reinforced plastics WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

1014 Mounting Bracket f/1011 12V SocketSocket not includedFeatures: Designed to withstand the rigors of wet environments and constant vibration Large contact surfaces for good electrical connection Twist lock system - plug locks securely into socket Internal strain relief and cord seal Nickel plated copper alloy used for all current carrying components Front panel, rear panel, or surface mount WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Centaur Charger - 12 VDC - 100AMP - 3-Bank - 120-240 VACFeatures: Quality without compromise -  Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation) All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz.  The chargers also accept a 90-400 V DC supply.  Three outputs that each can supply the full output current Three isolated outputs to simultaneously charge 3 battery banks Each output is capable to supply the full rated current.  Three-stage charging, with temperature compensation The Centaur charges at bulk rate until the output has reduced to 70% of the rated Amps, at which a 4 hour timer begins. After the timed period the charger switches to float rate. An internal temperature sensor is used to compensate the charge voltage with – 2 mV/ºC (– 1 mV/ºF) per cell. A DIP switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charging Banks: 3 Portable: No Charger Output Voltage: 12v Charger Output - Amps: 100a Charger Input - Voltage: 120/240v Box Dimensions: 9"H x 14"W x 25"L WT: 24.25 lbs UPC: 8719076021537 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

250A Surface Mount 87 Series Circuit BreakerThis 250A Egis circuit breaker protects electrical circuits from short-circuit events and over-current loads, preventing wire insulation overheating and subsequent destruction. Applications: Automatic circuit protection and manual on/off switching combine dual functionality in one reliable and compact solution Allows for circuit isolation and maintenance of load circuits by providing convenient switching and integral circuit protection capable of mounting adjacent to battery systems regardless of the location Features: IP66-sealed against dust and water Intrusion to ensure reliable circuit protection for the life of the electrical system installation  High voltage (48 Vdc) rating - easily supports 12 and 24 Vdc applications while offering advanced protection for 36 and 48 Vdc  High electrical and manual switching endurance delivers 2,000 cycles at full current High interrupt current - safely protects circuits connected to large paralleled battery banks with significant available power 4-year warranty - Egis stands behind its product's ability to meet the user's needs Specifications: Continuous Current Amps: 250 Max Voltage: 48 Cycling Endurance: 2,000 Interrupt Current @14 VDC (Amps): 5,000 Interrupt Current @28 VDC (Amps): 3,000 Ingress Protection Rating: IP66 Focal FeaturesON/OFF High Visibility ControlsSealed against dust and moisture penetration. The high-temperature rating for all installation locations.Reinforced Mounting Ensures long-term structural reliability with reinforced mounting tabs built to withstand the stress of vibration. Stainless Steel Hardware / Serrated Flange NutsCorrosion and vibration resistance for harsh environment applications.Proudly Made in the USAMade in the USA of high-quality components.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 250a Box Dimensions: 3"H x 3"W x 5"L WT: 0.6 lbs UPC: 850035199411 Quick Guide (pdf)

Read more less

C-CHARGER 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products. Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, this battery charger is built to last, performing in the toughest of marine environments. Features a battery type selector switch which allows the boater to charge either lead acid, gel, or AGM batteries.Marine UL listing ensures durability and safety• Only complete line of battery chargers approved by Marine UL's stringent specifications, testing, and evaluation• Tested for durability against static, impact, vibration, and shock• Ignition protected (USCG-33 CFR 183.410)• AC and DC fuse protectionMulti-step charging with temperature compensation• Restores up to 3 individual battery banks simultaneously• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditionsCorrosion resistant housing and components• Constructed of tough, anodized aluminum housing that stands up to the elements, including extreme heat, humidity, and salt air• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability• Meets requirements of MIL-1-46058CCool and quiet operation• Cooling fan only operates during peak current demands• Virtually no RFI or EMI interference exceeds FCC/Class B requirementsEasy to install and service• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries• Exterior slots for easy mounting• Easy access to terminal connections and fuses Replaced by Charles Recommended Direct Replacement Centaur 24v/60Amp/3Bank

Read more less

MasterBus Cable - 0.5M Suitable for data traffic and powering peripheral equipment, this is the only cable you need for your MasterBus network. MasterBus compatible products come standard with two ports, while other equipment requires an interface.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

6-Way Mega Fuse Holder with Busbar - 250ASix-way fuse holder for mega-style fuses with busbar (250A)Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Type: Fuse Blocks Fuse Type: MEGA/AMG Amperage: 250a Box Dimensions: 2"H x 6"W x 8"L WT: 1.2 lbs UPC: 8719076051350 Quick Guide (pdf)Brochure (pdf)

Read more less

All Digital Electronic ChargingIndustry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today's power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.ProMar Digital Performance ChargingProMar Digital Charging Performance - 12 Selectable ProfilesUp to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.Power Factor Correction - Global AC InputAuto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.Distributed On Demand TechnologyAutomatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.Digital Self-Calculating Absorption and Battery Health Re-Conditioning ModeAutomatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.Conservation Energy Saver ModeAfter 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles) Service and Fault Mode LED IndicatorsReal time indication of wiring faults or adverse conditions that may impact the operation of a boat's charging system.Automatic Fan Speed ControlQuiet operation. Innovative front exhaust prevents restriction of air flow and cooling.Automatic Temperature Compensation and Built-in SafetyRemote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Output - Amps: 50a Charging Banks: 3 Portable: No Charger Input - Voltage: 120/240v Charger Output Voltage: 12v Box Dimensions: 6"H x 11"W x 15"L WT: 8.15 lbs UPC: 031669631502 Owner's Manual (pdf)Brochure (pdf)

Read more less

Horizontal Double-Entry Cable Seal - GreyThe DS-HD6 double horizontal cable seal was designed to eliminate the time-consuming and sub-standard routing of solar panel cables. Scanstrut's seal helps you achieve a sleek, easy-to-fit, and 100% watertight installation every time. Perfect for routing two solar panel cables externally to internally on the roof of boats.Features: Designed for solar panel installations Compact footprint - just 54mm (W) 63mm (L) 24mm (h) Makes it perfect for installing it as close to the solar panel as possible Easy-fit cable routing that cuts down the installation time through wood, metal, and GRP IP68 watertight seal  Grey high-impact plastic  Includes 316 stainless steel fixings and a waterproof 3M gasket Clean and simple design The low-profile construction is impact-resistant and provides extra protection from water Captive nuts make for easy assembly and also allow for reliable repeat installations Scanstrut's materials have been selected to be UV-stable and hard-wearing No messy sealant on the bungs  Constructed from premium marine-grade materials Install 2 Cables – Select Any Combination:5mm (0.19”) and 6mm (0.23”) in any combination Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 9"L WT: 0.25 lbs UPC: 5060114798984

Read more less

SPDT Rocker Switch - 12V/24V - ON/OFF/ONSingle pole, double throw switch turns one of two circuits on.Features: Nominal voltage is 12V DC Rated for 25A at 12V DC Three 1/4" blade terminals Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 58027-03 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPDT Color: Black Action: On/Off/On Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046310

Read more less

ProSportHD 6 Gen 4 - 6 Amp - 1 Bank Battery ChargerProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. Features: ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication Lightweight Design Up to 40% lighter compared to an epoxy filled charger Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B Easy Installation and Operation Pre-wired with 6’ AC and DC cables Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries 3 Year Warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Portable: No Charging Banks: 1 Charger Output Voltage: 12v Charger Output - Amps: 6a Charger Input - Voltage: 120v Box Dimensions: 7"H x 9"W x 11"L WT: 4.7 lbs UPC: 031669440067

Read more less

Dockside 30A to 15A Adapter with GFI Provides safer hook-up to 30A dockside power Provides protection against harmful electric shock Reduces the possibility of fire Offers protection for up to 3 attached tools Corrosion resistant and rain-proof rated for outdoor use GFI trip level of 4-6 mA WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Pigtail Adapter Box Dimensions: 4"H x 8"W x 15"L WT: 2.1 lbs UPC: 093344312311

Read more less

Battery Isolator - 1 Alternator - 3 Battery - 70 AMPProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 70 amps. Owner's Manual (pdf)

Read more less

DC Master 24V to 12V Converter - 12A w/IsolatorPower you can rely onThe required voltage for DC current can vary. Some equipment requires 24 V, while onboard equipment usually requires 12 V. For custom DC current, Mastervolt offers a series of compact and made to measure DC-DC converters for both 12 V and 24 V battery systems that offer stable power with the right current for any connected consumer. There is a wide range of DC Master converters available, including insulated and non-insulated models.Benefits Recreational and semi-professional use. Easy to install using included mounting bracket, screws and fasteners. Smart electronics mean no unnecessary heat generation. Continuous output. Insulated and non-insulated models available. Two minutes of extra power for short power boosts. Excellent price/performance ratio. Intelligent DC-DC convertersA large benefit of the DC Master models is their two minutes of extra capacity; ideal if you need a short power boost.Complete package DC MasterAll DC Master converters are delivered with mounting bracket, screws and fasteners.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

All Digital Electronic ChargingIndustry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today's power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.ProMar Digital Performance ChargingProMar Digital Charging Performance - 12 Selectable ProfilesUp to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.Power Factor Correction - Global AC InputAuto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.Distributed On Demand TechnologyAutomatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.Digital Self-Calculating Absorption and Battery Health Re-Conditioning ModeAutomatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.Conservation Energy Saver ModeAfter 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles) Service and Fault Mode LED IndicatorsReal time indication of wiring faults or adverse conditions that may impact the operation of a boat's charging system.Automatic Fan Speed ControlQuiet operation. Innovative front exhaust prevents restriction of air flow and cooling.Automatic Temperature Compensation and Built-in SafetyRemote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Output - Amps: 30a Charging Banks: 3 Portable: No Charger Input - Voltage: 120/240v Charger Output Voltage: 24v Box Dimensions: 6"H x 11"W x 15"L WT: 8.65 lbs UPC: 031669631809 Owner's Manual (pdf)Brochure (pdf)

Read more less

Lead Battery Terminal - 5/16" & 3/8" Stud - Positive & Negative Combo PackStud Size:5/16 " & 3/8"Product Features: Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Battery Terminals Post Size: 5/16" & 3/8" Package Qty: 2 Heat Shrink: No Box Dimensions: 2"H x 3"W x 5"L WT: 0.75 lbs UPC: 091887263251 Quick Guide (pdf)

Read more less

Centaur Charger - 24 VDC - 40AMP - 3-Bank - 120-240 VACFeatures: Quality without compromise -  Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation) All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz.  The chargers also accept a 90-400 V DC supply.  Three outputs that each can supply the full output current Three isolated outputs to simultaneously charge 3 battery banks Each output is capable to supply the full rated current.  Three-stage charging, with temperature compensation The Centaur charges at bulk rate until the output has reduced to 70% of the rated Amps, at which a 4 hour timer begins. After the timed period the charger switches to float rate. An internal temperature sensor is used to compensate the charge voltage with – 2 mV/ºC (– 1 mV/ºF) per cell. A DIP switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Portable: No Charger Output Voltage: 24v Charger Output - Amps: 40a Charger Input - Voltage: 120/240v Charging Banks: 3 Box Dimensions: 9"H x 14"W x 25"L WT: 22.45 lbs UPC: 8719076021568 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

12V Stainless Steel Power SocketThe power socket with the plate is ideal for installing additional power outlets. Features: Constructed of stainless steel sockets with a stamped 304 stainless steel mounting plate Installs with two #8 RH fasteners (not included) Specifications: Maximum: 12VDC, 16A.     Socket Material: Stainless steel socket and molded cap  Distance Between Mounting Holes: 1-11/16 in. Height (not including the plate): 1-1/8 in. Fastener: #8 RH     Weight: .12 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

ProMar1 DS Digital - 10 Amp - 2 Bank ChargerProMar1 DS Generation 3 reflects a new outward design taken to the next level in performance with its all Digital Charging Technology. Fully Automatic with a 4-Stage Digital Charging algorithm proven to extend battery life. Sequential modes of Analyzing, Charging, Conditioning and a built-in Auto Maintain mode, safe for short and long term storage periods ensures your batteries are fully charged and maintained.Features: Fully Automatic 4-Stage Charging Dual Mode Charge Status Indicator Battery & Wiring Fault Detection Rugged Shockproof Construction Auto Maintain/Energy Saver Mode Extends Battery Life Safe for Long and Short Term Storage Pre-Wired with Waterproof Inline DC Fuses and Nickel Plated Copper Ring Terminals Built-in Safety Quiet EMI Design Meets US FCC Emissions Requirements WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Portable: No Charging Banks: 2 Charger Output Voltage: 12/24v Charger Output - Amps: 10a Charger Input - Voltage: 120v Box Dimensions: 5"H x 9"W x 11"L WT: 8.1 lbs UPC: 031669315105

Read more less

4365 Water Resistant USB Accessory Panel - 15A Circuit Breaker, 12V Socket, 2x 2.1A Dual USB ChargersEasy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options.Features: Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only Specifications: Positions: 1 Nominal Voltage: 12V DC

Read more less

Universal DC Cable Extender - 5'Universal design for all marine chargers with ring terminal cables. No cutting, stripping or splicing required.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

30A 125V CordsetEEL ShorePower CordsetsOne Hand. A simple twist. Full Power.The EEL (Easily Engaged Lock) ShorePower Cordset has an industry first, jaw-clamp design providing one-handed operation and a secure waterproof seal which completely eliminates the need for a locking ring. The EEL connection is built for the harshest environments and is UL approved. This easy-to-use cordset features a built-in cord light which serves as an alert to boaters when the cord is left plugged in. And, best of all, it works with your current inlet. In addition to cordsets with the EEL System, Marinco also has a full set of Pigtail and Y adapters all using the new EEL technology.Features: Designed for use with standard inlets (NEMA)30A, 125V capacities; 25' length Cord sets meet global industry standards including ABYC and UL New wing-clamp technology provides a true, watertight connection every time Single-handed operation Eliminates the need for a sealing ring Secondary locking feature for added security Built-in LED cord light guides you to a secure connection every time, even in the dark WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cordset Length: 25' Amperage: 30a Voltage: 125v Box Dimensions: 6"H x 11"W x 13"L WT: 10 lbs UPC: 093344051654 Owner's Manual (pdf)

Read more less

Universal Speaker Connector Kit f/16-14 AWG Wire GaugeMarine speakers are equipped with male disconnects in two sizes (.250 tab for positive and either .188 tab or .110 tab for negative), depending on speaker manufacturer. Universal Speaker Connector Kits include two .250 tabs, two .188 tabs and two .110 tabs female heat shrink disconnects that enable installation of two speakers regardless of manufacturer. Female heat shrink disconnects are the optimal connector for speaker installation as they provide a sealed connection against the marine environment.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Type: Disconnects Package Qty: 1 Heat Shrink: No Box Dimensions: 1"H x 2"W x 4"L WT: 0.05 lbs UPC: 091887983258

Read more less

SmartSolar Pluggable DisplayFeatures: The optional Victron SmartSolar MPPT Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display. Great add-on for Victron SmartSolar charge controllers Crystal clear display Mounting screws included Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

Alternator Protection Module - 48VThe Balmar APM provides best-in-class surge protection using the latest technology developed for the automotive industry. Protect Alternators From Damaging Effects: Battery switch disconnects Lithium battery BMS disconnects Surges from solenoids, combiners, starters, and other motors. The Balmar APM excels in both short-duration and longer-duration spikes, where other products fail.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

90° Tinned Copper Lug #6 - 5/16" - 2-Piece90° bend for ease of wire routing. Specifications: Type: Lugs Post Size: 5/16" Package Qty: 2 Heat Shrink: No Gauge: 6 AWG Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 091887991666

Read more less

Battery Balancer    (Will not work on 36V Bank)The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries. When the charge voltage of a 24V battery system increases to more than 27V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge.If needed, several balancers can be paralleled. A 48V battery bank can be balanced with three Battery Balancers.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Lockable: No Continuous Amperage: 0.7A Box Dimensions: 3"H x 6"W x 6"L WT: 0.65 lbs UPC: 8719076020950 Quick Guide (pdf)Brochure (pdf)

Read more less

16-14 AWG - #6 Nylon Ring Terminal - 25-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Type: Ring Terminals Post Size: #6 Package Qty: 25 Heat Shrink: No Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 091887212112 Brochure (pdf)

Read more less

22-18 AWG Nylon Double Crimp Butt Connectors - 100 PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection. Nylon insulated with insulation grip Funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 22-18 AWG Type: Butt Connectors Package Qty: 100 Heat Shrink: No Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs UPC: 091887221619 Brochure (pdf)

Read more less

22-18 Gauge - #8 Heat Shrink Spade Terminals - 25-PackAncor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.Features: Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength UL listed and CSA recognized WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 22-18 AWG Type: Spade connectors Post Size: #8 Package Qty: 25 Heat Shrink: Yes Box Dimensions: 1"H x 3"W x 5"L WT: 0.05 lbs UPC: 091887316315 Quick Guide (pdf)

Read more less

Safety Duplex Cable - 12/2 - 100'Features: ANCOR Duplex Cable is made to surpass the highest UL Boat Cable standards with ultra flexible (Type 3/Class K) stranding to resist fatigue due to vibration and flexing. Outer jacket is made for easy removal and provides the best abrasion resistance available ANCORs proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600 volts, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Inner conductors are correctly color-coded to ABYC standards Features red and yellow Marine Grade™ primary conductors in white common jacket WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red/Yellow Length (Feet): 100' Gauge: 12/2 AWG Box Dimensions: 5"H x 7"W x 7"L WT: 7.9 lbs UPC: 091887805918 Quick Guide (pdf)Brochure (pdf)

Read more less

100 Amp Surface Mount Circuit BreakerOur high-amp circuit breakers deliver reliable protection for heavy-duty marine, RV, truck, and bus electrical systems. Available in multiple reset styles, these breakers safeguard auxiliary and accessory circuits with confidence.Features: Configuration: Switchable/Manual reset Voltage Compatibility: Works with 12V, 24V, 32V, and 48V DC systems Durability: Rugged thermoplastic housing with nickel-plated copper components Marine-Grade: Designed to resist corrosion, vibration, and harsh environments Performance: Interrupting Capacity: Up to 3,000A at 14V, 30V, and 48V DC Reliable Protection: Scales performance across the 30A–300A range Trusted in Demanding Applications: From trolling motors to inverters and winches Installation Made Simple: Accepts standard 1/4″ lugs for quick, secure connections Flexible mounting for both panel mount and surface mount setups Compact design makes integration easy in tight spaces Specifications: Amperage: 100a Box Dimensions: 2"H x 2"W x 3"L WT: 0.25 lbs UPC: 810196330207 Brochure (pdf)

Read more less

130 Amp Panel Mount Circuit BreakerOur high-amp circuit breakers deliver reliable protection for heavy-duty marine, RV, truck, and bus electrical systems. Available in multiple reset styles, these breakers safeguard auxiliary and accessory circuits with confidence.Features: Configuration: Switchable/Manual reset Voltage Compatibility: Works with 12V, 24V, 32V, and 48V DC systems Durability: Rugged thermoplastic housing with nickel-plated copper components Marine-Grade: Designed to resist corrosion, vibration, and harsh environments Performance: Interrupting Capacity: Up to 3,000A at 14V, 30V, and 48V DC Reliable Protection: Scales performance across the 30A–300A range Trusted in Demanding Applications: From trolling motors to inverters and winches Installation Made Simple: Accepts standard 1/4″ lugs for quick, secure connections Compact design makes integration easy in tight spaces Specifications: Amperage: 130 Box Dimensions: 2"H x 2"W x 3"L WT: 0.2 lbs UPC: 810196334274

Read more less

120 Volt AC 2 Sources - 30AFeatures: Backlight label positions Red "Reverse Polarity" LEDs installed Green "Power Available" LEDs installed Lockout slides prevent connecting multiple AC sources simultaneously Specifications: Source Selection: 2 Nominal Voltage: 120V AC Height: 4.75" (120.65mm) Width: 4.88" (123.95mm) Depth: 3.00" (76.2mm) Weight: 1.71lb (0.78kg) Includes:(2) - 7574 - A-Series Raised Rocker Circuit Breaker - Double Pole 30AWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AC/DC: AC Box Dimensions: 5"H x 7"W x 9"L WT: 1.6 lbs UPC: 632085012083 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Pro Installer Link Joiner 5-WayThis tin-plated bus bar can be used to link 5 adjacent DC products together.  The rating varies from 400-650 Amps, depending on how this busbar is wired. Made from tin-plated high-purity copper, this bar is intended for use with the BEP Pro Installer system, but it has universal applications anywhere a high amperage link bus is needed. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Links can be doubled to accommodate higher loads.Features: Tin-plated high-purity copper for maximum conductivity and corrosion resistance 650 AMP continuous rating between two adjacent positions 400 AMP continuous rating across all positions Bars can be doubled up for additional amperage This link bar is intended to be used with 3/8" studs Hole spacing is 2"  Overall dimensions 8.8" x 1" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Push-Button Switch 12V Momentary On/Off - Red LEDPush-Button switches and buzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers.Features: Maximum switch current rating 5 amps IP67 environmental protection switches IP50 environmental protection buzzers 80 decibel buzzer sound intensity Warning buzzers flash red on alarm WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Stainless Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 843687005919

Read more less

3-Position SPDT Push-Pull Switch - OFF/ON1/ON1 & 2Single pole, double throw switch turns on position 1 or position 1 and 2.Features: Heavy-duty, noncorrosive construction with moisture-repellent insulators Brass case, stem, terminals and mounting hardware All knobs are screw-on type Nominal voltage is 6-36V DC. Rated for 10A at 12V DC #8-36 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-476 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPDT Box Dimensions: 3"H x 3"W x 7"L WT: 0.3 lbs UPC: 870216045955

Read more less

10mm Double Instulated StudThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Battery Management Contour Connect Panel for Twin Engine with VSR'sThe CC-803N incorporates a version of our very successful dual engine battery switch cluster. The CC-803N is supplied with cables to allow for horizontal or vertical configurations. The components can also be easily removed and reconfigured if the factory layout does not suit your application.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Class T Fuse Holder with 2 Additional Studs 225-400A Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load. Radiused ends improve cable routing options Class-T: 225-400 Amp WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: Class T Type: Fuse Blocks Box Dimensions: 2"H x 7"W x 8"L WT: 0.95 lbs UPC: 870216043500 Brochure (pdf)

Read more less

24-Hour Essential Circuits Module2 x 10AThe 706-2W 24 hour essential circuit module is suitable for essential circuits such as bilge pump auto float switch supplies and stereo memory circuits. The push to reset function ensures essential 24hr circuits cannot be switched off inadvertently. This is contained in the contour lock single module. Designed for smaller systems where only 2 circuit breakers are required Supplied with 2 x 10 amp Carling CLB Series circuit breakers - push to reset WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

24-Hour Essential Circuits Module1 x 5AThe 706-4W 24hr service module consists of 1 x 5amp and 3 x 15amp push to reset Carling CLB Series thermal circuit breakers. Suitable for essential circuits such as bilge pump auto float switch supplies and stereo memory circuits. The push to reset function ensures essential 24hr circuits cannot be switched off inadvertently. This is contained in the contour lock double module. Consists of one 5A and three 15A push to reset Carling CLB Series thermal CBs The push to reset function ensures essential 24hr circuits cannot be switched off inadvertently WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

m-Series Dual Circuit Plus 2 of PN 6011(1) 100A C-Series Flat Rocker Circuit Breaker(3) 15A Push Button Thermal Circuit Breakers Designed for twin engine configurations Provides 24 hour circuit protection Provides main DC circuit protection in addition to high ampere load protection Protects electronics from sags and spikes caused by engine cranking Allows emergency cross connect between isolated battery banks Isolates the Engine circuit from the House circuit Simplifies battery switch operation Allows independent battery discharge Addition of an Automatic Charging Relay automates charging both batteries Includes 4218 - Square Format Labels and 4140 - 24 Hour Round Labels WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

2000 Amp Jump Starter - 16000MAH Power BankNever feel unprepared again with this durable lithium-powered Battery Tender® 2000 AMP Jump Starter and Power Bank. Fits in your glove compartment or under your seat, yet strong enough to start any 12-volt battery on gas and diesel engines up to a V8. This product is safe and easy for motorcycles, cars, SUVs, trucks, and RVs. Gone are the days of asking for a jump and connecting to another battery with cumbersome jumper cables. Simply connect each alligator clip to the corresponding terminal on your vehicle’s battery and start up the engine. Spark proof and reverse polarity protection gives you peace of mind and ensure you connect to the correct terminal before the jump starter kicks in.JUMP START & CHARGEPeak current of 2000 AMPs; fast-charge your electronic devices with 3 USB outputs    VERSATILEDesigned for 12-volt batteries up to 8.0L gas and 6.5L diesel engines - ideal for cars, SUVs, trucks, boats, and more; able to charge via USB, Type-C, AC, and DC devices on the go    SAFESpark-proof and reverse polarity protection ensures no charge is sent unless the alligator clips are connected correctly to the battery    CHARGING PORTSType C (in and out), USB 2.4 AMP and USB 3 AMP Quick Charge ports,12V DC, and 12V jump startSpecifications: Output: 2000 Amp Input: 5V Warranty: 1-Year What's Included? 2000 AMP Jump Starter Smart Alligator Clips Micro USB/Type Charging Cable USB Wall Plug Cube Female Cigarette Adaptor Hard Zippered Carrying Case Instruction Manual Owner's Manual (pdf)

Read more less

Freedom 458 Inverter/ChargerAC Power Inverter with High Surge Capability, 3-Stage ChargerWith filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV. Temperature controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion. For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation.Product Features MSW AC power inverter with high surge capability Automatic 3-stage battery charger Temperature compensation with equalization stage provides optimal charging of deep cycle batteries Built-in transfer switch automatically transfers between inverter power and incoming AC power Power sharing prevents source AC input circuit breaker from tripping Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panels Includes battery temperature sensor 30 month warranty Protection Features Over voltage and under voltage protection Over-temperature protection Overload protection Short circuit protection Electrical Specifications - Inverter Output power (continuous): 2000W Surge power (AC amps): 50A Output frequency regulation: 60Hz Inverter voltage regulation: 120V +/-5% true RMS Output wave form: Modified sine wave Efficiency (full load): 85% Peak efficiency: 92% No load current draw (idle mode): 0.12A AC output connections: Dual - 20/15 Circuit Breakers AC input connections: Single AC transfer switch: 30A Electrical Specifications - Charger Charge rate: 100A DC AC input voltage range: 90 130 VAC Battery voltage (nominal): 12 VDC Battery voltage range: 10.0 15.5 VDC Low battery cut-out: 10.0 VDC AC input (max. charge mode): 21A AC Bulk charge voltage: 14.3 VDC*** Float charge voltage: 13.4 VDC*** Equalize charge voltage: 16.3 VDC Charge control: 3-stage Battery type settings: Wet / Gel 1 / Gel 2 / AGM Equalization: Yes Temperature sensitive charging: Yes ***Default value varies with battery type and temperatureWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Outlet Qty: None Charging Banks: 1 Inverter Output Voltage: 120v Inverter Input Voltage: 12v Charger Input - Voltage: 120v Inverter Cont. Output Wattage: 2000w Charger Output Voltage: 12v Charger Output - Amps: 100a Box Dimensions: 13"H x 15"W x 19"L WT: 55.7 lbs UPC: 647912106149 Owner's Manual (pdf)Brochure (pdf)

Read more less

9230Analog Meter Shunt 100A/50mV For use with DC Ammeters For continuous operation, it is recommended that shunts not to be run at more than two-thirds (66%) the rated current under normal conditions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

24-12-3 DC ConverterConvert 17-32 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)Features: Excellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating The heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components Polyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments Numerous Converter and Load Protection Circuits: Current limiting Automatic thermal shutdown Short circuit proof Reverse polarity Overvoltage protection Carries CE mark Specifications: Input Voltage: 17-32 Output Voltage: 13.6 Output Amps (Intermittent): 3 Output Amps (Continuous): 3 Case Size (H x W x D): 3.5 x 3.5 x 1.75 inches (8.9 x 8.9 x 4.5 centimeters) Weight: 1 lb. (.45 kg) Output: 13.6 VDC (internally adjustable 12.6 -14.5)  Ripple: 150 mV P-P maximum Regulation: 1% Line/Load Switching Frequency: 40 kHz Efficiency: 85% – Typical. Isolation: Output/Chassis; Input/chassis: 250 VDC Duty Cycle Ratings*: Intermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating. Continuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time Idle Current: Less than 100 mA (including power “ON” light) Operating Temp Specifications: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature Model 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C Mechanical Specifications: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal coated PC board Options:Operation as battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

NP-24 Nav-Pac - 24VMarine communication and navigation electronics such as programmable data transceivers, GPS, and other microprocessor-controlled devices require clean and steady DC input power. Their sensitive circuitry is highly vulnerable to voltage drops from engine starts, noise and line spikes from alternators and motors, and noise from various other electronic devices. NAV-PAC prevents these conditions from affecting electronics.Features: Prevents voltage “drop-out” during engine start and/or other high intermittent loads such as Thrusters Absorbs line “spikes” Filters out electrical interference Provides supplemental voltage and battery backup for up to 15 min. Optional remote panel (773-5037-0) Specifications: Output: 24 Volt @ 15 amps max. Battery: Sealed Rechargeable 5.0 Amp-Hour, 5-7 years of typical life, can be replaced. A low-voltage disconnect circuit protects the battery from total discharge. Certified by DOT and IATA for shipment by air. Noise Filtering: Audio through 200 MHZ Voltage Spike Protection: Transient energy capability; 100 Joules, 4,000 amps Max (8 x 20 microseconds) Back-Up Power: 8A for 15 minutes, 12A for 8 minutes, and 18A for 2 minutes Size: 6.0 x 6.75 x 7.5 inches (13.3 X 17.14 X 19 cm) Weight: 8 lbs. (3.6 kg) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less