Round USB & USB-C Power Plug with VoltmeterUSB 3.0 & USB-C Power Plug with Volt Meter charges two devices simultaneously while the LED screen displays voltage status. Can be used on a boat, car, or RV. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. Features:  This portable version fits all Sea-Dog® Power Sockets and any standard 12V receptacle Constructed of aluminum and injection molded nylon Blue LED display FCC, CE, RoHS compliant Specifications: Output DC: 5V/6A  Input: 8-32VDC  USB-C Watts: 60W@24V  USB 3.0 Watts: 36W@12V Plug-In Side Diameter: (inch) 1-1/4" Length: (inch) 2-1/2" *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

USB & USB-C Rocker Switch Style Power SocketThis USB & USB-C Rocker Switch Style Power Socket charges two devices simultaneously. Fits into any 13/16” x 1-7/16” rocker switch hole. The total output 4.8A load is split 2.4A per side as needed. USB-C features Power Delivery (PD) for faster and more flexible charging. Enough power to charge phones, pads, and tablets quickly and efficiently.Features:  A protective dust cap extends the life of the charger  Constructed of injection molded nylon Blue LED display IP65 rating  CE and RoHS compliant Specifications: Output DC: 5V/4.8A Input: 8-32VDC USB-C Watts: 60W@24V  USB Watts: 36W@12V Plug-In Side Width: (inch) 13/16" *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

12" SAE Power Cable Polarized Electrical ConnectorThis SAE-type polarized electrical connector is a two-prong plug and socket connector set. Features:14-gauge duplex wireSpecifications: Length: 12 in. Volts: 12-24 Max Amps: 20A @ 12V Wire Gauge: 14 AWM Weight: 0.11 lb. Specifications: Type: Cables Box Dimensions: 1"H x 5"W x 9"L WT: 0.1 lbs UPC: 035514432740 Brochure (pdf)

Read more less

Combo Kit with ELCI Sensor & 30 Amp Breaker Non-Metallic Door - WhiteFeatures: White Sensor 30 Amp Breaker WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30a Type: Misc Box Dimensions: 6"H x 6"W x 8"L WT: 2 lbs UPC: 682500440830 Brochure (pdf)

Read more less

SmartPlug/15 AMP Cordset - 4'This 30 AMP Female SmartPlug to 15 AMP Male Standard Wall Plug (3-pin connector) cordset comes with a Cool Blue LED Power indicator light that glows when power is on.  This cord set provides a super flexible cord that can be tightly coiled even in cold weather. Features: Multi-Point Locking System – Side clips lock the plug body securely into the inlet which eliminates any stress on the electrical connection from the movement of the power cord. Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet. Technical Specifications: Length - 4' Color - Orange Boatside Connection - 30 AMP/115 V Female SmartPlug Dockside Connection - 15 AMP/115 V Male Standard Wall Plug *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage: 115 Type: Cordset Length: 4' Amperage: 30/15 Box Dimensions: 4"H x 10"W x 13"L WT: 2.55 lbs UPC: 682500440458 Brochure (pdf)

Read more less

Weathercap The SmartPlug Weatherproof Cover protects SmartPlug boatside shore power connectors from moisture when not in use.  Comes with a lanyard for tethering the Weatherproof Cover to a cordset.Features Weatherproof seal – Seals against multi-fin gasket in connector face Ease of Use – Locks into the face of a SmartPlug Connector Easy to Store – Included lanyard tethers the cover to a cordset Interchangeable – Works on all SmartPlug Connectors In the Box: Weatherproof cover Lanyard *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Charge N Start 1120 1 Amp Battery Charger & 1200 Amp Jump StarterNever Face a Dead Battery Again: Introducing the Battery Tender® Charge N Start 1120Transform your battery maintenance experience with the innovative Battery Tender® Charge N Start 1120 – your ultimate 2-in-1 power solution. Engineered in the USA and backed by our 60-year legacy of battery expertise, this versatile device combines our advanced charging technology with reliable jump-starting power in one portable unit.Professional-Grade Power When You Need It MostWhether you're facing an emergency start or maintaining your vehicle's battery health, the Charge N Start 1120 delivers exceptional performance. With 1200A of instant jump-starting power, it easily handles up to 6.0L gas and 4.0L diesel engines. The integrated 12V/1 AMP smart charger utilizes our exclusive ISM (Infinite Sequential Monitoring) technology to optimize your battery's health and extend its lifespan.Auto-Switch FeatureAdvanced charging technology automatically switches between maintaining your vehicle's battery and the internal jump starter, ensuring both power sources are always charged and ready for use. No manual intervention needed – the Charge N Start 1120 intelligently manages both batteries for complete peace of mind.Smart Technology Meets SafetyEvery Charge N Start 1120 features our advanced microprocessor-controlled charging system that automatically detects your battery charge level and adjusts accordingly. Our proprietary Charge N Store™ technology monitors and maintains optimal float voltage during long-term storage, ensuring your battery stays ready for action.Multiple built-in safety features, including spark-proof connections, reverse polarity protection, and temperature compensation, provide peace of mind during every use.Designed for Real-World ConvenienceWe've thoughtfully engineered every aspect of the Charge N Start 1120 for maximum usability: Easy to see LED lights show charging status and battery health at a glance Built-in LED emergency light for nighttime visibility Heavy-duty smart clamps with copper-plated jaws ensure superior connectivity Compact, portable design fits easily in your vehicle Premium storage case included for protection and organization  Versatile CompatibilityFrom weekend warriors to professional mechanics, the Charge N Start 1120 is designed to handle diverse vehicle applications: Automotive: Cars, SUVs, and light trucks Power Sports: Motorcycles, ATVs, and UTVs Marine: Personal watercraft and boats Emergency: Reliable backup power when you need it most  The Smart Choice for Complete Battery CareThe Charge N Start 1120 represents the next evolution in battery maintenance technology. By combining jump-starting capabilities with our industry-leading charging technology, you get professional-grade battery care in one convenient device.Whether you're maintaining a single vehicle or managing an entire fleet, the Charge N Start 1120 delivers the performance, reliability, and safety features you expect from Battery Tender.Don't let battery issues slow you down. Experience the peace of mind that comes with having America's most trusted battery care solution at your fingertips. The Battery Tender® Charge N Start 1120 – because your adventures shouldn't wait for a dead battery.Specifications: Charges & Maintains: Lawnmowers, Motorcycles, ATVs, Personal Watercraft Battery Compatibility: AGM, GEL, Lithium, Standard (Sealed or Flooded Lead Acid) Reach: Over 14 Ft Total Reach, AC Power Cord Length: 6 ft - 18 AWG, Charger Length: 0.72 ft, DC Output Cord Length: 6 ft - 18 AWG, DC Accessory Length: 2 ft - 16 AWG Output: 12V @ 1 AMP Charging, 12V 1200 AMP Jump Starting Input: 120V AC Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 1 amp Charger Output Voltage: 12v Charging Banks: 1 Portable: Yes Box Dimensions: 6"H x 7"W x 10"L WT: 4.3 lbs UPC: 734357370126 Owner's Manual (pdf)Brochure (pdf)

Read more less

Single XD - NMEA 2000 - Relay with Knobs - 4 Position DTFeatures: Bullet-proof Construction: Sealed to IP67/IP6K9K, high-temperature electronics and materials allow mounting anywhere. Stainless steel cable lug studs. Large mounting holes accept 1/4-20 / M6 attachment hardware. 500A continuous / 1600A cranking (per switch) - supports all standard marine electrical systems. Intuitive Manual Control option simplifies operation and awareness of the state of manual override and whether the device is being left in a locked off or locked on state (not available on competitive solutions) Simple Programmability via simple dip switches allows each relay function significant flexibility for OEMs and installers.  90-95% Less Off-State Current: Compared to competitive products and system solutions that require multiple devices for similar functionality Applications: Seamless NMEA 2000 Integration – Control switches, monitor switch status, and battery voltage. Flexible Control Options – Operate via NMEA 2000 or discrete analog inputs for added versatility. 35-75% Reduction in Mounting Space & Product Weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts. Eliminates Dead Start Batteries by sharing charging on either of two batteries and isolating batteries when no charge sources are present. Expandable with Link and Cross-Link Busbars to Additional Dual, Triple, or Single XD Relays: Supports 2 or 3 battery systems with standard busbar interconnect accessories. Specifications: Type: Electric Box Dimensions: 3"H x 4"W x 8"L WT: 1.2 lbs UPC: 850067590200

Read more less

Triple XD - NMEA 2000 - Relay/ACR/Relay with Knobs - 12 Position DTFeatures: Bullet-proof Construction: Sealed to IP67/IP6K9K, high-temperature electronics and materials allow mounting anywhere. Stainless steel cable lug studs. Large mounting holes accept 1/4-20 / M6 attachment hardware. 500A continuous / 1600A cranking (per switch) - supports all standard marine electrical systems. Intuitive Manual Control option simplifies operation and awareness of the state of manual override and whether the device is being left in a locked off or locked on state (not available on competitive solutions) Simple Programmability via simple dip switches allows each relay function significant flexibility for OEMs and installers.  90-95% Less Off-State Current: Compared to competitive products and system solutions that require multiple devices for similar functionality Applications: Seamless NMEA 2000 Integration – Control switches, monitor switch status, and battery voltage. Flexible Control Options – Operate via NMEA 2000 or discrete analog inputs for added versatility. 35-75% Reduction in Mounting Space & Product Weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts. Eliminates Dead Start Batteries by sharing charging on either of two batteries and isolating batteries when no charge sources are present. Expandable with Link and Cross-Link Busbars to Additional Dual, Triple, or Single XD Relays: Supports 2 or 3 battery systems with standard busbar interconnect accessories. Specifications: Type: Electric Box Dimensions: 3"H x 4"W x 8"L WT: 2.8 lbs UPC: 850067590187

Read more less

Dual XD - NMEA 2000 - ACR/Relay with Knobs - 8 Position DTFeatures: Bullet-proof Construction: Sealed to IP67/IP6K9K, high-temperature electronics and materials allow mounting anywhere. Stainless steel cable lug studs. Large mounting holes accept 1/4-20 / M6 attachment hardware. 500A continuous / 1600A cranking (per switch) - supports all standard marine electrical systems. Intuitive Manual Control option simplifies operation and awareness of the state of manual override and whether the device is being left in a locked off or locked on state (not available on competitive solutions) Simple Programmability via simple dip switches allows each relay function significant flexibility for OEMs and installers.  90-95% Less Off-State Current: Compared to competitive products and system solutions that require multiple devices for similar functionality Applications: Seamless NMEA 2000 Integration – Control switches, monitor switch status, and battery voltage. Flexible Control Options – Operate via NMEA 2000 or discrete analog inputs for added versatility. 35-75% Reduction in Mounting Space & Product Weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts. Eliminates Dead Start Batteries by sharing charging on either of two batteries and isolating batteries when no charge sources are present. Expandable with Link and Cross-Link Busbars to Additional Dual, Triple, or Single XD Relays: Supports 2 or 3 battery systems with standard busbar interconnect accessories. Specifications: Type: Electric Box Dimensions: 3"H x 4"W x 8"L WT: 2 lbs UPC: 850067590194

Read more less

MRBF Terminal Fuse - 100 Amp Transparent easy visual of fuse status Ignition-protected SAE/J1171-ISO8846 High interrupt rating satisfies ABYC requirements for DC main circuit protection on larger battery banks Color-coded for easy ID of amperage rating Features: Protects Electrical Circuits from short circuit events and over-current loads, preventing wire insulation overheating and subsequent destruction. High Interrupt Current safely protects circuits connected to large paralleled battery banks with significant available power Ignition Protected safe for installation in closed compartments with potentially explosive gases Harsh Environment design with shock and vibration resistance ideal for marine and vehicle electrical systems. Sealed Against Dust & Water Intrusion to ensure reliable circuit protection for the life of the electrical system installation 58 Vdc Rating: easily supports 12 to 48V nominal applications. High Interrupt Current: safely protects circuits connected to large paralleled battery banks with significant available power 4-Year Warranty: We stand behind our product's ability to meet your needs. Specifications: Continuous Current (Amps): 100 Max Voltage (VDC): 58 Interrupt Rating @ 14 VDC (Amps): 10,000 Interrupt Rating @ 48Vdc (Amps): 5,000 Interrupt Rating @ 58Vdc (Amps): 2,000 Ingress Protection: IP66 Specifications: Amperage: 100 Fuse Type: Terminal Type: Fuses Box Dimensions: 1"H x 2"W x 6"L WT: 0.1 lbs UPC: 850053879616

Read more less

Red 3/0 AWG Battery Cable - Sold By The Foot Pacer's 3/0 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier.  How?  By creating a flexible yet tough marine cable.  This 3/0 AWG marine battery cable can handle the toughest environments.  This marine battery cable is made from Type III tinned copper.  The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible PVC jacket.  These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold by the Foot Specifications: Color: Red Gauge: 3/0 AWG Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 1 lbs Brochure (pdf)

Read more less

60A Surface Mount Circuit Breaker - 285 SeriesThis 60A Egis circuit breaker protects electrical circuits from short-circuit events and over-current loads, preventing wire insulation overheating and subsequent destruction.Applications: Automatic circuit protection and manual on/off switching combine dual functionality in one reliable and compact solution Allows for circuit isolation and maintenance of load circuits by providing convenient switching and integral circuit protection capable of mounting adjacent to battery systems regardless of the location Features: Sealed against dust and water intrusion to ensure reliable circuit protection for the life of the electrical system installation  High Voltage (48 Vdc) Rating - easily supports 12 and 24 VDC applications while offering advanced protection for 36 and 48 VDC High Electrical / Manual Switching Endurance delivers 6,000 cycles at full current High Interrupt Current - safely protects circuits connected to large paralleled battery banks with significant available power 4-Year Warranty - Egis stands behind its product's ability to meet the user's needs Specifications: Continuous Current Amps: 60 Max Voltage: 48 Cycling Endurance: 6,000 Interrupt Current @16 VDC (Amps): 5,000 Interrupt Current @28 VDC (Amps): 3,000 Ingress Protection Rating: IP67 Focal Features:ON/OFF High Visibility ControlsSealed against dust and moisture penetration. The high temperature rating for all installation locations.Integrated Terminal InsulatorsProtects against inadvertent shorts from positive terminals to adjacent grounded surfaces.Stainless Steel Hardware / Serrated Flange NutsCorrosion and vibration resistance for harsh environment applications.Proudly Made in the USAMade in the USA of high-quality components.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 60a Box Dimensions: 3"H x 3"W x 5"L WT: 0.4 lbs UPC: 850035199145 Quick Guide (pdf)

Read more less

Round USB & USB-C Power Socket with Hidden VoltmeterUSB 3.0 & USB-C Power Socket with Voltmeter charges two devices simultaneously while the LED screen displays voltage status. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. A protective dust cap extends the life of the charger. Features:  LED volt meter reads voltage up to 14.6 volts  Includes an On/Off button to conserve battery power when not in use  Constructed of injection molded nylon  Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires  Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105) Blue LED display  IP65 rating & RoHS compliant. Specifications: Output DC: 5V/6A Input: 8-32VDC USB-C Watts: 60W@24V  USB Watts: 36W@12V Plug-In Side Diameter: (inch) 1-7/16" Length: (inch) 1-1/2" *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Round Dual USB & USB-C Power SocketUSB & USB-C Power Socket charges two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. USB-C features Power Delivery (PD) for faster and more flexible charging. Enough power to charge phones, pads, and tablets quickly and efficiently. A protective dust cap extends the life of the charger.Features:  Constructed of injection molded nylon  Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires  Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105) Blue LED illumination  IP65 rating  CE and RoHS compliant Specifications: Output DC: 5V/4.8A  Input 8-32VDC  USB-C Watts: 60W@24V  USB Watts: 36W@12V Plug-In Side Diameter: (inch) 1-7/16" Length: (inch) 1-1/2" *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

MasterShunt 500 CZoneMasterShunt is the heart of every battery powered energy system. This integrated battery monitor shares information about the battery bank with other MasterBus, CZone or NMEA 2000 enabled devices such as battery chargers, inverter/chargers and displays. No surprises: allowing complete automation of your system, MasterShunt improves comfort, prolongs battery life and extends your runtime.The MasterShunt 500 provides all information needed for monitoring your battery bank and control of your system, such as voltage, current, state of charge and time remaining. All information is made available to the system by a single MasterBus or CZone cable. Extremely accurate measurement of current flow over state of charge enables the MasterShunt to precisely determine the time remaining.Programmable events and an integrated real time clock make it possible to fully automate your system. Examples are to start your generator automatically when the battery bank is low (or just delaying at night!), or to automatically generate a warning at a certain depth of discharge. The proven MasterShunt design has been upgraded to obtain an even higher level of accuracy and control. Taking into account battery specific parameters, MasterShunt takes reading accuracy to a whole new level.The MasterShunt 500 CZone allows freedom of choice with regards to fuse type, rating and location. The battery monitor is supplied with an internal bus bar, to be used in situations where an external fuse holder is selected. In case the MasterShunt is installed close to the battery, the bus bar may be replaced by either an ANL type or Class T main fuse, saving both space and cost.Features: MasterBus, CZone and NMEA 2000 communication. Fits in a CZone system including setup tools and configuration file. Digital shunt providing the energy system with extensive information and historical data. Very accurate and reliable determination of State of Charge (SOC). Service mode prevents memory loss during system maintenance. Realistic and precise indication of the time remaining. For higher current, multiple MasterShunt models may be installed in parallel. MasterConnect system makes connecting to the DC Distribution product very easy. Straight forward, easy to install. Freedom of choice for fuse type, rating and location. Suitable for T-fuse and ANL-fuse (to be ordered separately). Robust housing with isolation of the DC connections. Applications:Any application in marine, mobile, industrial, infrastructure where batteries need to be monitored for increased reliability, battery life, comfort and runtime. Owner's Manual (pdf)

Read more less

7441 UL-489 Circuit Breaker - 10A Flat RockerSuitable for use when UL-489 specifications are required (Navy, Army, or Coast Guard vessels, and other vessels covered under CFR 46).Specifications: Amperage: 10A DC Actuator Style: Flat Rocker Poles: 1 Maximum Voltage: 80V DC Circuit Breaker Type: Magnetic Hydraulic - Trip Free Terminal Type:  #10-32 Screw Tin-Plated Brass  Interrupt Capacity: 10000A Specifications: Amperage: 10a Box Dimensions: 2"H x 3"W x 5"L WT: 0.25 lbs UPC: 632085074418

Read more less

7440 UL-489 Circuit Breaker - 5A Flat RockerSuitable for use when UL-489 specifications are required (Navy, Army, or Coast Guard vessels, and other vessels covered under CFR 46).Specifications: Amperage: 5A DC Actuator Style: Flat Rocker Poles: 1 Maximum Voltage: 80V DC Circuit Breaker Type: Magnetic Hydraulic - Trip Free Terminal Type: #10-32 Screw Tin-Plated Brass  Interrupt Capacity: 10000A Specifications: Amperage: 5a Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs UPC: 632085074401

Read more less

AC Rotary Switch Panel 30 Ampere 2 Positions + OFF, 4 PoleVoltage: 120vAmperage: 30Positions: 2 + OFFPoles: 4 Switches between 2 - 120 Volt AC shore power sources and 1 - 240 Volt AC source to 2 -120 Volt AC load groups Includes 6337 heavy duty industrial rated switch Two-part polyurethane slate gray finish Heavy 1/8" aluminum 5052 alloy Red reverse polarity LED indicators Green power available LED indicators Compact solution when circuit protection is provided elsewhere WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AC/DC: AC Max Breaker Quantity: 2 +OFF Voltage: 240v Box Dimensions: 5"H x 7"W x 9"L WT: 0.8 lbs UPC: 632085083861 Owner's Manual (pdf)

Read more less

Heavy Duty Lugs - 4 Gauge Wire - 5/16" Post - 25-PackCable Gauge: 4Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 4 AWG Type: Lugs Post Size: 5/16" Package Qty: 25 Heat Shrink: No Box Dimensions: 1"H x 1"W x 3"L WT: 0.5 lbs UPC: 091887243062 Quick Guide (pdf)

Read more less

Contura II Position #6 IS 3 Position (NAV/ANC) with VMM Series Adapter 2MThe VMM-Series is a sealed multiplexed, digital switch module featuring the Carling V-Series Contura® rocker switches. Well known for their cutting-edge design, high quality, maximum performance, and unmatched reliability, the VMM-Series reduces the complexity and cost of traditional wiring harnesses, increases product life and reliability, and reduces installation time. Available in six simple configurations, VMM6 is a plug-and-play solution that delivers switching technology at a very attractive price point.Available in four simple configurations, the VMM6 is an out-of-the-box plug-and-play solution that delivers switching technology at a very attractive price point. In addition, for customers who want the option to source aftermarket actuators, we offer two configurations of the VMM6 without actuators (Part numbers A3801-5, A3801-6).The VMM6 is sold off-the-shelf in the following configurations. Each configuration includes one 0.2m VMM to NMEA 2000® adapter cable.Features: NMEA 2000® CAN Protocol IP68 Sealing Protection with plug installed in unused connector Configurable Horizontal or Vertical Mounting Options Aftermarket Actuators are readily available with a wide selection of Legends LED feedback of circuit state Low Current Switching Tactile and Audible Feedback Specifications:Contura II Actuators with right switch, 3-position, and blue LEDsThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

CKM NMEA 2000 Adapter Cable - .2MCKM to NMEA 2000® Adapter Cable - .2 meterThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Cables Box Dimensions: 1"H x 1"W x 6"L WT: 0.2 lbs

Read more less

VMM6 Contura® Series Digital Switch Module, 6 Rocker - No Actuators w/Right Switch 3-Position & Blue LEDsThe VMM-Series is a sealed multiplexed, digital switch module featuring the Carling V-Series Contura® rocker switches. Well known for their cutting-edge design, high quality, maximum performance, and unmatched reliability, the VMM-Series reduces the complexity and cost of traditional wiring harnesses, increases product life and reliability, and reduces installation time. Available in six simple configurations, VMM6 is a plug-and-play solution that delivers switching technology at a very attractive price point.Available in four simple configurations, the VMM6 is an out-of-the-box plug-and-play solution that delivers switching technology at a very attractive price point. In addition, for customers who want the option to source aftermarket actuators, we offer two configurations of the VMM6 without actuators (Part numbers A3801-5, A3801-6).The VMM6 is sold off-the-shelf in the following configurations. Each configuration includes one 0.2m VMM to NMEA 2000® adapter cable.Features: NMEA 2000® CAN Protocol IP68 Sealing Protection with plug installed in unused connector Configurable Horizontal or Vertical Mounting Options Aftermarket Actuators are readily available with a wide selection of Legends LED feedback of circuit state Low Current Switching Tactile and Audible Feedback Applications: Control of navigation lights Control of boarding lights Control of area lights This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Contura V Position #6 IS 3 Position (NAV/ANC) with VMM Series Adapter 2MThe VMM-Series is a sealed multiplexed, digital switch module featuring the Carling V-Series Contura® rocker switches. Well known for their cutting-edge design, high quality, maximum performance, and unmatched reliability, the VMM-Series reduces the complexity and cost of traditional wiring harnesses, increases product life and reliability, and reduces installation time. Available in six simple configurations, VMM6 is a plug-and-play solution that delivers switching technology at a very attractive price point.Available in four simple configurations, the VMM6 is an out-of-the-box plug-and-play solution that delivers switching technology at a very attractive price point. In addition, for customers who want the option to source aftermarket actuators, we offer two configurations of the VMM6 without actuators (Part numbers A3801-5, A3801-6).The VMM6 is sold off-the-shelf in the following configurations. Each configuration includes one 0.2m VMM to NMEA 2000® adapter cable.Features: NMEA 2000® CAN Protocol IP68 Sealing Protection with plug installed in unused connector Configurable Horizontal or Vertical Mounting Options Aftermarket Actuators are readily available with a wide selection of Legends LED feedback of circuit state Low Current Switching Tactile and Audible Feedback Specifications:Contura V Actuators with right switch, 3-position, and blue LEDsThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

CKM12 Keypad with CKM to NMEA 2000® Adapter Cable - 0.2MThe CKM12 is a customizable keypad featuring laser-etched legends and LED function lights for each button. The LEDs also provide diagnostics when fault conditions are detected.With the rugged mechanical packaging (IP69K), the CKM12 can be installed inside or outside the cabin. The low-profile design offers a seamless dashboard look, and it can be mounted either vertically or horizontally.The CKM12 offers significant advantages over traditional electromechanical switches, such as a longer actuation cycle (1,000,000), reduced wiring harness, and reduced installation time. The CKM12 is sold off the shelf in two configurations and includes a CKM to NMEA 2000® Adapter Cable.The CKM12 is sold off the shelf in two configurations of legends. Consult the factory for additional options and minimum quantities for customization.Features: NMEA 2000® CAN Protocol IP69K Front Panel Sealing Protection Configurable Diagnostic Feedback Standard or Custom Etched Legends 1,000,000+ Button Actuation Cycles. Low Current Switching Tactile and Audible Feedback Circle on buttons Applications: The dimmable button switches on the CKM12 are programmable to control any Maretron digital switching loads Can be paired with third-party systems using the NMEA 2000 standard PGN 127501 Binary Status Report This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

CKM12 Keypad with CKM to NMEA 2000® Adapter Cable - 0.2M (Horizontal Orientation)The CKM12 is a customizable keypad featuring laser-etched legends and LED function lights for each button. The LEDs also provide diagnostics when fault conditions are detected.With the rugged mechanical packaging (IP69K), the CKM12 can be installed inside or outside the cabin. The low-profile design offers a seamless dashboard look, and it can be mounted either vertically or horizontally.The CKM12 offers significant advantages over traditional electromechanical switches, such as a longer actuation cycle (1,000,000), reduced wiring harness, and reduced installation time. The CKM12 is sold off the shelf in two configurations and includes a CKM to NMEA 2000® Adapter Cable.The CKM12 is sold off the shelf in two configurations of legends. Consult the factory for additional options and minimum quantities for customization.Features: NMEA 2000® CAN Protocol IP69K Front Panel Sealing Protection Configurable Diagnostic Feedback Standard or Custom Etched Legends 1,000,000+ Button Actuation Cycles. Low Current Switching Tactile and Audible Feedback Number in center of circle on buttons Applications: The dimmable button switches on the CKM12 are programmable to control any Maretron digital switching loads Can be paired with third-party systems using the NMEA 2000 standard PGN 127501 Binary Status Report This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

No Actuators - All Positions Momentary ON W/VMM Series - Adapter Cable 2MThe VMM-Series is a sealed multiplexed, digital switch module featuring the Carling V-Series Contura® rocker switches. Well known for their cutting-edge design, high quality, maximum performance, and unmatched reliability, the VMM-Series reduces the complexity and cost of traditional wiring harnesses, increases product life and reliability, and reduces installation time. Available in six simple configurations, VMM6 is a plug-and-play solution that delivers switching technology at a very attractive price point.Available in four simple configurations, the VMM6 is an out-of-the-box plug-and-play solution that delivers switching technology at a very attractive price point. In addition, for customers who want the option to source aftermarket actuators, we offer two configurations of the VMM6 without actuators (Part numbers A3801-5, A3801-6).The VMM6 is sold off-the-shelf in the following configurations. Each configuration includes one 0.2m VMM to NMEA 2000® adapter cable.Features: NMEA 2000® CAN Protocol IP68 Sealing Protection with plug installed in unused connector Configurable Horizontal or Vertical Mounting Options Aftermarket Actuators are readily available with a wide selection of Legends LED feedback of circuit state Low Current Switching Tactile and Audible Feedback Specifications:No Actuators with all positions momentary ON and blue LEDsThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Contura II All Position Momentary ON with VMM Series Adapter 2MThe VMM-Series is a sealed multiplexed, digital switch module featuring the Carling V-Series Contura® rocker switches. Well known for their cutting-edge design, high quality, maximum performance, and unmatched reliability, the VMM-Series reduces the complexity and cost of traditional wiring harnesses, increases product life and reliability, and reduces installation time. Available in six simple configurations, VMM6 is a plug-and-play solution that delivers switching technology at a very attractive price point.Available in four simple configurations, the VMM6 is an out-of-the-box plug-and-play solution that delivers switching technology at a very attractive price point. In addition, for customers who want the option to source aftermarket actuators, we offer two configurations of the VMM6 without actuators (Part numbers A3801-5, A3801-6).The VMM6 is sold off-the-shelf in the following configurations. Each configuration includes one 0.2m VMM to NMEA 2000® adapter cable.Features: NMEA 2000® CAN Protocol IP68 Sealing Protection with plug installed in unused connector Configurable Horizontal or Vertical Mounting Options Aftermarket Actuators are readily available with a wide selection of Legends LED feedback of circuit state Low Current Switching Tactile and Audible Feedback Specifications:Contura II Actuators with all positions momentary ON and blue LEDsThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Contura V All Position Momentary ON with VMM Series Adapter 2MThe VMM-Series is a sealed multiplexed, digital switch module featuring the Carling V-Series Contura® rocker switches. Well known for their cutting-edge design, high quality, maximum performance, and unmatched reliability, the VMM-Series reduces the complexity and cost of traditional wiring harnesses, increases product life and reliability, and reduces installation time. Available in six simple configurations, VMM6 is a plug-and-play solution that delivers switching technology at a very attractive price point.Available in four simple configurations, the VMM6 is an out-of-the-box plug-and-play solution that delivers switching technology at a very attractive price point. In addition, for customers who want the option to source aftermarket actuators, we offer two configurations of the VMM6 without actuators (Part numbers A3801-5, A3801-6).The VMM6 is sold off-the-shelf in the following configurations. Each configuration includes one 0.2m VMM to NMEA 2000® adapter cable.Features: NMEA 2000® CAN Protocol IP68 Sealing Protection with plug installed in unused connector Configurable Horizontal or Vertical Mounting Options Aftermarket Actuators are readily available with a wide selection of Legends LED feedback of circuit state Low Current Switching Tactile and Audible Feedback Specifications:Contura V Actuators with all positions momentary ON and blue LEDsThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Black Plastic Vertical Cable Seal for Wire Up to 13.5mm/0.53"The Seaview Cable Seals (also known as CableClams, Cable Glands, or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors -The split seal design eliminates the need to remove cable connectors during installation.   Watertight installation -  Tapered rubber seal forms watertight installation. The base gasket is also provided for a clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant, and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Cable Glands Box Dimensions: 1"H x 3"W x 8"L WT: 0.3 lbs UPC: 727908835816 Brochure (pdf)

Read more less

Marine Battery Charger 115/230V Input 32VDC - 30A - 3-BankSentry SFR Ferroresonant series marine battery chargers are in an elite class, setting the standard for dependable battery chargers. Sentry chargers are designed to operate for decades in the harsh marine environment. They are completely field serviceable and come with a 2-year parts and labor warranty.Features: Available in 12vdc, 24vdc and 32vdc models Completely charge the battery and turn off to prevent overcharging Ignition protected to allow engine room installations Charging outputs for Lead-Acid, Optional- AGM, Gel, and Lead Calcium This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Input - Voltage: 115/230v Charger Output - Amps: 30a Charger Output Voltage: 32vdc Charging Banks: 3 Portable: No Box Dimensions: 13"H x 21"W x 21"L WT: 44 lbs UPC: 850046155901 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

BM100 Battery Monitoring SolutionThe BM100 is a complete system comprising SmartShunt and the veKonvert NMEA 2000 interface. It is part of Digital Yacht’s iSeaSense range of NMEA 2000 boat instruments. With this solution, your multi-function display becomes a sophisticated battery and energy management system.FeaturesDigital Yacht’s BM100 battery monitoring system allows highly accurate DC voltage, current, and capacity measurements, enabling reliable monitoring of your boat’s battery and electrical system.Core to the system is the SmartShunt. It measures battery voltage and current. Based on these measurements, it intelligently calculates the battery’s state of charge and the time to depletion for the remaining charge. It also keeps track of historical data, such as the deepest discharge and average discharge current, as well as the number of charge and discharge cycles. The smart shunt can also monitor the voltage of a 2nd battery, typically dedicated to engine starting.The product is a collaboration between Victron Energy and Digital Yacht. The system utilizes Victron’s proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.The BM100 is part of a wider group of products now introduced by Digital Yacht that bring NMEA 2000 connectivity to Victron systems using the VE.Direct interface.Victron solar panel controllers (MPPTs) and battery monitors can now also interconnect to NMEA 2000 via the veKonvert interface.Monitoring the battery with the BM100 will give important feedback to the user so that remedial measures can be taken when necessary. Doing this will extend battery life. There’s also an optional battery temperature sensor available.The BM100 can also integrate with Digital Yacht’s other NMEA 2000 and wireless instruments, which offer hybrid NMEA 2000 and wireless display options.NMEA 2000 InterfaceThe system features an NMEA 2000 interface, so your navigation multi-function display or plotter can display all key parameters. Modern MFDs from leading manufacturers such as Garmin, Raymarine, Furuno, and Navico allow electrical battery data to be displayed via their NMEA 2000 interface. Alarms and alerts for low capacity and voltage can also be enabled.Bluetooth InterfaceThe BM100 also has a standalone wireless Bluetooth interface, so your mobile phone or iPad can connect and display current, voltage, capacity, additional historical data, state of charge information, and time to go based on remaining battery capacity.Specifications: BM100 solution comes as a complete package with SmartShunt and the veKonvert NMEA 2000 interface Bluetooth interface for setup and detailed analysis, including charge/discharge cycles, state of charge, remaining capacity, and historical data Use your phone/tablet and your NMEA 2000 devices for battery monitoring and management 500A SmartShunt included for the main battery system Monitor the voltage of a separate (eg starter) battery Universal NMEA 2000 gateway for Victron’s popular range of smart battery monitors/SmartShunt using the VE.Direct interface (see compatibility list in the FAQ tab) Enables electrical and battery monitoring and management on compatible multi-function displays (Raymarine, Garmin, Navico, Furuno, etc) Provides battery voltage, charge/discharge current, state of charge, and time to depletion based on a sophisticated algorithm Easy installation, plug ‘n play connectivity, and self-powering from the NMEA 2000 bus Supports alerts generated by the SmartShunt Supports multiple SmartShunts for multi-battery systems Also compatible with other VE.Direct products such as solar MPPT controllers Vekonvert Is Compatible with the Following Victron Products:BMV -700, BMV -702, BMV -700H, BMV-712 Smart, BMV-710H Smart, BMV-712 Smart Rev2, SmartShunt 500A/50mV, SmartShunt 1000A/50mV, SmartShunt 2000A/50mV, and All MPPT Charge ControllersNOTE: veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged into the VE.Direct interfaces of any Victron "Consumers" such as Multiplus, Quattro, Cerbo, etc.

Read more less

10A Solar Charge Contoller - 12/24VFeatures: Advanced micro-controller with Series Type PWM Charging 10A charging for 12V / 24V Lead Acid, Sealed AGM Batteries with auto mbattery voltage detection 10A rated load terminals with protection for low battery disconnect Integrated battery voltage temperature compensation to prevent under/over charging  User friendly LED display for monitoring Suitable for up to 160W panels for 12V battery / up to 320W panels for 24V battery WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

AC Rotary Switch Panel 65 Ampere 2 positions + OFF, 2 PolePoles: 2Voltage: 120vAmperage: 65Positions: 2 + OFF Switches 2 - 230 Volt AC sources Includes 9011 heavy duty industrial rated switch Two-part polyurethane slate gray finish Heavy 1/8" aluminum 5052 alloy Red reverse polarity LED indicators Green power available LED indicators Compact solution when circuit protection is provided elsewhere WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AC/DC: AC Max Breaker Quantity: 2 +OFF Voltage: 120v Box Dimensions: 5"H x 7"W x 9"L WT: 1.1 lbs UPC: 632085083656 Owner's Manual (pdf)

Read more less

16 Positions(10) 15A Single Pole Circuit BreakersWhite SwitchesFeatures: Voltage 12/24v Amperage 100A All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters) All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed in all circuit positions MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance Two-part polyurethane slate gray finish Heavy 1/8" aluminum 5052 alloy Industry standard height and width Countersunk mounting holes throughout Detailed installation instructions and cutout template included Includes set of 30 common Large Format Panel Labels Over 500 individual labels available WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage: 12/24v AC/DC: DC Max Breaker Quantity: 16 Box Dimensions: 5"H x 9"W x 12"L WT: 3.9 lbs UPC: 632085083779 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Class T Replacement Fuse - 200 Amp200-amp replacement fuse for Samlex CFB2-400 fuse block assembly.Features:Individual 200-amp replacement fuseApplications:Inverter AccessoriesSpecifications: Amps: 200 amps  Fuse: 200 A  Weight: 0.2 (lbs.) Weight: 0.09 (kg) Dimensions: 3 x 1.25 x 1.25 (in.) Dimensions: 7.6 x 3.2 x 3.2 (cm) Specifications: Amperage: 200a Fuse Type: Class T Type: Fuses Box Dimensions: 1"H x 5"W x 8"L WT: 0.15 lbs UPC: 622988079849

Read more less

600W Pure Sine Wave Inverter - 12VPST Series (120 VAC)This high efficiency DC-AC inverter converts 12 Volts DC to 600 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs. Features include built-in electronic GFCI, overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.Features: High efficiency Temperature controlled cooling fan – reduces energy consumption Low interference Wide operating DC input range: 10.7 - 16.5 VDC Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit Low idle power draw Dual GFCI protected AC outlets Optional remote control (sold separately): Model RC-15A Comes with pin-type battery cable lugs Safety certified to UL standards, FCC compliant Specifications: Input: 12 VDC Output: 120 VAC Watts: 600 Surge: 1000 Watts Remote Control: RC-15A sold separately Weight: 5.9 (lbs) Weight: 2.7 (kg) Dimensions: 9.37 x 10.87 x 3.23 (in) Dimensions: 238 x 276.2 x 82 (mm) Safety: ETL to UL Standard Warranty: 2 Year Limited Applications: Service vehicles Mobile Offices Boats Recreation Vehicles, Camping Telecommunication Field work / Construction sites Solar power systems Emergency backup power Home electronics: TV, VCR, video games Computers, printers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 600w Outlet Qty: 2 Duplex GFCI Inverter Input Voltage: 12v Waveform: Pure Sine Wave Box Dimensions: 6"H x 11"W x 14"L WT: 7.2 lbs UPC: 622988072154 Owner's Manual (pdf)Brochure (pdf)

Read more less

Speaker Wire - 12 AWG 328' (100M) Roll The Fusion marine speaker cable range is specifically engineered for use on boats and ensures the best listening experience with your Fusion speakers and subwoofers. The speaker cable was specifically designed for the marine environment with high-quality materials to help protect the cable from the elements.Ideal for connection with your Fusion marine speakers and subwoofers, the speaker cable features tinned copper wiring with parallel conductors for superior performance. The all-copper wire construction ensures the audio signal is transmitted with minimal resistance, delivering a higher-quality audio signal to your onboard speakers and subwoofers.The result is a superior speaker cable that delivers reliable performance in the harsh marine environment, season after season.  Features: Construction: Multistrand:  Tinned Copper Cable with PVC Jacket Temperature Rating:  105 °C (221 °F) dry or 90 °C (194 °F) wet Fire Retardant Rating:  VW-1 Voltage Rating:  600 V max. Oil Resistance:  Yes Warranty:  1 Year WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 328' Gauge: 12 AWG Color: White Box Dimensions: 6"H x 10"W x 10"L WT: 19.25 lbs UPC: 753759261665 Brochure (pdf)

Read more less

6" Cable Tie - Black - 30-40lb Tensile Strength - 1.5" Bundle Diameter - 100 Piece BagCable ties are one of the most common wire management used today. They are found in a variety of industries where they are used to secure wire bundles, cables, or other surfaces. They are known for their ease of installation and are built to last in tough environments. Made from Nylon 6.6, the white cable ties are built for indoor use and the black cable ties are meant for both indoor and outdoor usage. Cable ties are some of the most widely used bundling and harness materials available. Features: Natural: For indoor use Black: For indoor or outdoor use (UV resistant) The curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed up installation Applications: Cable ties are the most widely used and versatile bundling and harnessing material available Used to secure a cable bundle to another surface such as a control panel, communication rack, wall, or ceiling Compliances: UL Listed, CSA Flammability UL 94V-2 RoHS & CE compliant Characteristics: 6.6 Nylon (Nat. & UV res. Black) Max. Cont. Temp. 185 °F (85 °C) Min. Cont. Temp. -76 °F (-60 °C) Screw Size #4 to #10 Specifications: Type: Cable Ties Box Dimensions: 1"H x 6"W x 9"L WT: 0.3 lbs UPC: 840248216616 Brochure (pdf)

Read more less

Tinned Lug 1 AWG - 5/16" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 1 Stud Size: 5/16” Length: 1.719” Width: 0.692” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 1 AWG Heat Shrink: No Package Qty: 10 Post Size: 5/16" Type: Lugs Box Dimensions: 1"H x 5"W x 9"L WT: 0.35 lbs UPC: 840248205474 Brochure (pdf)

Read more less

Deutsch 6 AWG DTHD Power Plug & Receptacle with Pin & SocketDTHD power plugs and receptacles are single connectors for heavy-duty applications. Easy to install, environmentally sealed, and compact they are a simple, field-serviceable alternative to a splice. Contact a Pacer expert with any questions that you may have.Features: Environmentally sealed disconnectable power wire splicing 60-100 Amps at 125°C Easy to install Field serviceable Applications: Wire-to-wire applications Enclosed connectors offer field-proven reliability and rugged quality Characteristics: Redundant Silicone Seals Contacts are hand-insertable Compliances: Ingress Protection (IP) Level: IP67 EU RoHS/ELV Specifications: Kit Contents: (1) DTHD Plug, (1) Size 4 Socket, (1) DTHD Receptacle, (1) Size 4 Pin, (2) Reducer Crimp Sleeves for 10 or 8 AWG Deutsch Series: DTHD Wire Range: 6 AWG Connector Types: Plugs & Receptacles Brochure (pdf)

Read more less

Red 8 AWG Primary Wire - 25'Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 8 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 8 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Red Gauge: 8 AWG Length (Feet): 25' Box Dimensions: 3"H x 5"W x 5"L WT: 2.6 lbs UPC: 840248203388 Brochure (pdf)

Read more less

Yellow 4 AWG Battery Cable - 25' Pacer's 4 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Oftentimes, marine applications are in enclosed areas with sharp turns. Installation can become difficult. Pacer simplified this process by developing flexible yet tough marine cables. This 4 AWG marine battery cable is built to handle the harshest conditions. All our marine cable is made from Type III tinned copper. The copper resists corrosion and ensures the longevity of the cable.  It is then insulated with a durable and pliable PVC jacket. These things together make it the highest quality marine battery cable available. Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Yellow Gauge: 4 AWG Length (Feet): 25' Box Dimensions: 4"H x 7"W x 7"L WT: 5.15 lbs UPC: 840248203906 Brochure (pdf)

Read more less

BlueSolar MPPT Charge Controller - 75V - 10AMPFeatures: Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.  Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.  Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.  Programmable battery charge algorithm See the software section on our website for details  Day/night timing and light dimming option See the software section on our website for details  Programming, real-time data and history display options - Color Control GX or other GX devices: see the Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 18-75v Charger Output - Amps: 10a Charger Output Voltage: 12v/24v Charging Banks: 1 Portable: No Box Dimensions: 2"H x 6"W x 7"L WT: 0.8 lbs UPC: 8719076025306 Quick Guide (pdf)Brochure (pdf)

Read more less

8" UV Black Heavy Duty Cable Zip Ties - 100 PackAncor offers a wide variety of materials, styles, and sizing options. A DoubleLock design offers increased tensile strength that is 33% stronger than the industry standard cable tie. With a unique design and high-quality construction, Marinco cable ties provide a great solution for bundling wire, cable, hoses, cords, and countless other applications. Specifications: Type: Cable Ties Box Dimensions: 1"H x 4"W x 12"L WT: 0.3 lbs UPC: 093344501449

Read more less

Red 18 AWG Primary Wire - 500' Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 18 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 18 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Red Gauge: 18 AWG Length (Feet): 500' Box Dimensions: 4"H x 7"W x 7"L WT: 5.55 lbs UPC: 840248201155 Brochure (pdf)

Read more less

8/2 AWG Safety Duplex Cable - Flat Cable - Red/Yellow - 50'Duplex Boat Cable is used in low voltage AC applications as well as DC circuits.  Pacer manufactures 8 AWG Duplex boat cable in house in the USA for the best quality.  First, the cable is built from finely stranded, Type III tinned copper conductors.  These conductors allow for flexibility and help to prevent corrosion. The PVC jacket helps 8 AWG Duplex Boat Cable to be flexible while preventing moisture from accumulating.  How does it do that?  During the extrusion process, the spaces between wires are filled.  This leaves no space for moisture or air to accumulate.  After that, a talcum powder coating is given to the interior wires. This coating is used to allow the outer jacket to be easily removed.  Just another reason 8 AWG Duplex boat cable is perfect for marine use. Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.Features: Extruded exterior cable insulation with no gaps Highly flexible color coded wire insulation Stranded, tinned copper conductors Annealed Finely Stranded Tinned Copper ASTM B172 Class K Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 2 Type of Cable - Duplex  *Sold as an Individual Specifications: Color: Red/Yellow Gauge: 8/2 AWG Length (Feet): 50' Box Dimensions: 7"H x 7"W x 7"L WT: 10.65 lbs UPC: 840248200516 Brochure (pdf)

Read more less

C-Series Digital Remote with 50' CableMeter, digital volt, C-Series remote with 50' cableUsed with C35/40/60 Charge ControllersWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less