PROwatt SW Sine Wave InverterPURE POWER. TRUE VALUE.The PROwatt SW offers affordable, quality pure sine wave inverter solution for both recreational and commercial applications. PROwatt SW provides the necessary current to startup demanding electrical loads. In addition to dual GFCI AC receptacles, the PROwatt SW Series include an innovative USB connection for providing power to most USB chargeable devices. The PROwatt SW Series offers many safety features not found in similar inverters. When equipped with a remote control, the PROwatt SW Series has the ability to provide automatic ignition lockout shutting down the inverter's output when the vehicle's ignition is not engaged.The compact, easy-to-use and easy-to-install design of the PROwatt SW Series makes it ideal for use in commercial truck, RV and marine applications. With True Sine-Wave output, the PROwatt SW Series can provide power for all types of electrical loads including, variable speed power tools, advanced electrical appliances, microwaves and much more. The PROwatt SW provides household AC power anywhere.Features: 900W Continuous, 2000W Surge Capability Built-in digital display for DC volts and output power Built-in USB port Dual GFCI AC receptacles for safe operation Heavy duty terminals for trouble-free battery connection Available ON/OFF remote switch (with ignition lockout) Two year warranty Protection Features: Low voltage shutdown (10.5 Vdc) Low voltage alarm (11.0 Vdc) Over voltage protection (15.5 Vdc) Over load shutdown Over temperature shutdown GFCI protection Electrical Specifications: Continuous Power:900W Surge Capacity (Peak): 2000W DC Input: 12 Vdc (nominal) AC Output Frequency: 60 ± 0.5 Hz AC Output Voltage Range: 104 - 127 Vac USB Output: 5 V / 500 mA Output Waveform: True Sine Wave Optimum Efficiency: 90% No Load Current Draw: < 0.6 A Input Voltage Range: 10.5 - 15.5 Vdc General Specifications: Operating Temperature Range: 32°F - 104°F (0°C - 40°C) AC Receptacle: Dual GFCI USB Receptacle: Single Port (Type A) DC Connection: Hardwire Recommended DC Fuse: 150 A Digital Display: DC voltage, AC output power & error codes Dimensions (H x W x L): 3.5" x 8.7" x 13.1" (89 x 220 x 339mm) Weight: 7.2lb (3.3kg) Warranty: Two year WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 1 Duplex GFCI Inverter Surge Rating: 2000w Inverter Input Voltage: 12v Waveform: True Sine Wave Inverter Output Voltage: 120v AC Connection Type: Hardwire Inverter Cont. Output Wattage: 900w Box Dimensions: 6"H x 10"W x 15"L WT: 8.55 lbs UPC: 715535894146 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

5124ANL Fuse80A Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks For use with Blue Sea Systems' ANL Fuse Blocks WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 80a Fuse Type: ANL Type: Fuses Box Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbs UPC: 632085051242

Read more less

Zeus A225S 3.15 Alternator with Isolated Ground & Terminal BlockThe highest power output alternator in its size/class. Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance, running 8-20% cooler than incumbent alternators due to: Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote. Our advanced coating absorbs less heat, keeping the A225S cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Models are available with an internal/external voltage regulator. Proudly made in the U.S.A. Technical Specifications: Voltage - 12v Field Type - P Rotor Poles - 16 Stator Size - 130mm Frame Size - Small Weight - 12 lbs/5.4 kg Regulation - Internal/External (Internally regulated with adaptor for optional external regulation.) Output Voltage - 14.1v (Default) Finish - (Black) Cerakote or E-coating Cut-In RPM - 1,061 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) - 254 Amps Sustained Cruising Output (Hot, 6,000 RPM) - 187 Amps Sustained Idle Output (Hot, 3,000 RPM) - 157 Amps Max Continuous Operating Temperature - 110°C / 230°F Mounting Application:Replaces most small case styles using a 3.15" saddle style mount (e.g., Hitachi, Lucas, Mitsubishi). Most Yanmars. Requires Standard single "V" belt upgrading to a Serpentine System Quick Guide (pdf)Brochure (pdf)

Read more less

Black 4 AWG Battery Cable - Sold By The FootFeatures: ANCOR Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing. ANCORs proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600V, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter boat (CFR Title 46) and ABYC standards WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Length (Feet): Sold By The Foot Gauge: 4 AWG Box Dimensions: 1"H x 1"W x 12"L WT: 0.1 lbs Owner's Manual (pdf)

Read more less

Battery Switch - Heavy Duty-Series 600A - Off/OnSurface and panel mounting variations allow for flexible installations.Harsh Environment Design with stainless-steel hardware, serrated flange nuts, and high-temperature materials.Ignition Protected safe for installation in closed compartments with potential explosive gases.Features: Robust Construction IP66 Waterproof 32V - Voltage Rating  600A Continuous Current Ignition Protected Specifications: Continuous Amperage: 600 Box Dimensions: 4"H x 4"W x 7"L WT: 1.3 lbs UPC: 850067590590

Read more less

Dual XD - NMEA 2000 - Relay/Relay with Knobs - 8 Position DTFeatures: Bullet-proof Construction: Sealed to IP67/IP6K9K, high-temperature electronics and materials allow mounting anywhere. Stainless steel cable lug studs. Large mounting holes accept 1/4-20 / M6 attachment hardware. 500A continuous / 1600A cranking (per switch) - supports all standard marine electrical systems. Intuitive Manual Control option simplifies operation and awareness of the state of manual override and whether the device is being left in a locked off or locked on state (not available on competitive solutions) Simple Programmability via simple dip switches allows each relay function significant flexibility for OEMs and installers.  90-95% Less Off-State Current: Compared to competitive products and system solutions that require multiple devices for similar functionality Applications: Seamless NMEA 2000 Integration – Control switches, monitor switch status, and battery voltage. Flexible Control Options – Operate via NMEA 2000 or discrete analog inputs for added versatility. 35-75% Reduction in Mounting Space & Product Weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts. Eliminates Dead Start Batteries by sharing charging on either of two batteries and isolating batteries when no charge sources are present. Expandable with Link and Cross-Link Busbars to Additional Dual, Triple, or Single XD Relays: Supports 2 or 3 battery systems with standard busbar interconnect accessories. Specifications: Type: Electric Box Dimensions: 3"H x 4"W x 8"L WT: 2 lbs UPC: 850067590224

Read more less

Premium Replacement Alternator with 50mm Multi-Groove PulleyReplacement alternator that will fit Mercruiser 4.3L-6.2L, 12 Volt, 70 AMP, Internal Fan, 50-mm multi-groove serpentine pulley included.Features: All alternators are engineered for performance and reliability All alternators are engineered and manufactured with precision and quality All alternators must meet or exceed OEM performance before being boxed Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:DELCO Alternator 19020611DELCO Alternator 19020612MERCURY Alternator 863077TPLEASURECRAFT Alternator RA097007SIERRA Alternator Alternator 18-6298PROTORQUE Alternator PH300-0035MPPARTS Alternator ADR0298This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 70A Voltage: 12v Box Dimensions: 8"H x 8"W x 9"L WT: 8.4 lbs UPC: 693006008264 Quick Guide (pdf)

Read more less

Contura II Switch DPST Black - OFF-(ON)Vibration, shock, thermoshock, moisture and salt spray resistantMounts in Blue Sea Systems Contura Water Resistant Panels and Contura Switch Mounting PanelsSpecifications: Action: OFF-(ON) Pole/Throw: DPST - Double Pole/ Single Throw Actuator Color: Black - Contura II Common Applications: Horn or Windshield Wipers Maximum Amperage: 20A @ 12V / 15A @ 24V Amperage Operating Current: 18mA (LED) Minimum Operating Temperature: -40° C Maximum Operating Temperature: 85° C Embedded LEDs: 0 Lighting: LED rated 100,000 hours 1/2 half Seals: Internal and external gasket panel seal Weight: 0.09lb (0.04 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (ON)-OFF Color: Black Throw/Pole: DPST Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 632085079352

Read more less

50 AMP Male Non-Metallic Inlet Cover - BlackSmartPlug’s 50 AMP 125/250 V inlets provide 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors.  The solid sleeve connection and weatherproof seal makes it a preferred option. The mounting flange holes match existing inlets so it can be easily installed to replace the old twist-type inlet products in minutes. Features: Reduces Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand. Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time-even in the dark! Multi-Point Locking System – Side clips lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord. Weatherproof Seals – Superior gaskets installed in the inlet cover and interior of the plug body eliminates moisture penetration. Quick and Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes. *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

50 AMP Male Inlet W/Cover  - Stainless Steel  SmartPlug’s 50 AMP 125/250 V inlets provide 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors.  The solid sleeve connection and weatherproof seal makes it a preferred option.  The mounting flange holes match existing inlets so it can be easily installed to replace the old twist-type inlet products in minutes. Features: Reduces Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand. Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time-even in the dark! Multi-Point Locking System – Side clips lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord. Weatherproof Seals – Superior gaskets installed in the inlet cover and interior of the plug body eliminates moisture penetration. Quick and Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes. *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

50 AMP Dual Configuration Cordset - 25'For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.  Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology. The 50 AMP 125/250 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boat Side and a Twist Type Dockside connector.Features: Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord. Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet. LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions. Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion. Technical Specifications: Length - 25' Color - Orange Boatside Connection - 50 AMP/125/250 V SmartPlug Dockside Connection - 50 AMP/125/250 V Twist Type Plug *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 50a Length: 25' Type: Cordset Voltage: 125/250v Box Dimensions: 9"H x 19"W x 19"L WT: 23 lbs UPC: 682500440151 Owner's Manual (pdf)

Read more less

50 AMP Inlet and Female Cord Connector Combo - White The SmartPlug Combo Kit includes both a 50 AMP 125/250 V Male inlet connector and Female Cord End Connector. The Female Cord End Connector is designed to be used with your existing cord.  This package offers superior performance and ease of use. Features: Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand. Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark. Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord. Weather Resistant Seals – Silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration. Quick and Easy Installation. *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

30 AMP Inlet and Female Cord Connector Combo - Grey The SmartPlug Combo Kit includes both a 30 AMP 125V Male inlet connector and Female Cord End Connector. The Female Cord End Connector is designed to be used with your existing cord.  This package offers superior performance and ease of use. Features: Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand. Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark. Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord. Weather Resistant Seals – Silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration. Quick and Easy Installation. *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 4"H x 9"W x 11"L WT: 1.55 lbs UPC: 614458746139

Read more less

30 AMP Male Non-Metallic Inlet Cover - BlackSmartPlug’s 30 AMP 125 V inlets provide 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors.  The solid sleeve connection and weatherproof seal makes it a preferred option.  The mounting flange holes match existing inlets so it can be easily installed to replace the old twist-type inlet products in minutes. Features: Reduces Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand. Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time-even in the dark! Multi-Point Locking System – Side clips lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord. Weatherproof Seals – Superior gaskets installed in the inlet cover and interior of the plug body eliminates moisture penetration. Quick and Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes. *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Starlink® Compatible Horizontal Cable Seal - GreyDesigned for a range of Starlink®, NMEA, and RJ45 cable and connector diameters, the DS-HSL-01 Horizontal Cable Seal provides a clean, reliable cable routing solution for rooftop installations.The supplied split pre-drilled bungs allow cables with connectors already attached to pass through the seal, removing the need to cut and re-terminate connectors during installation. Multiple bung sizes and a self-drill option allow installers to customize the fit while maintaining a watertight seal easily.Based on our most popular horizontal cable seal design, the low-profile construction is impact-resistant and offers additional protection against water ingress. The horizontal cable entry keeps the cable exit as close as possible to the mounting surface, creating a neat, professional installation.Suitable for cables ranging from 2-8 mm (0.07”-0.31”), the DS-HSL-01 is ideal not only for Starlink installations but also for solar panels, light bars, lighting, and other rooftop electronics.Marine Grade MaterialsManufactured from premium UV-stable, hard-wearing materials, the DS-HSL-01 is built for long-term outdoor performance. Rated IP68, it delivers a guaranteed 100% watertight seal in demanding marine and outdoor environments.Easy InstallationCaptive nuts ensure a fast and reliable installation while allowing repeat fitting if required. The easy-fit cable routing system helps reduce installation time and delivers a clean, professional finish.Specifications: Material: High Impact Plastic  Height: 29mm (1.14”) Length: 88mm (3.46”) Color: Grey Cable Compatibility: Starlink Performance (Gen 3), Starlink Enterprise (Gen 3), Standard (Gen 3), Mini, NMEA cables, RJ45 cables Max Connector size: 16mm (0.62”) Bungs: 2-3mm (0.07-0.11”) / 4-5mm (0.15-0.19”) / 6-7mm (0.23-0.28”) / 7-8mm (0.28-0.31”) / 1 x Self Drill Specifications: Type: Electric Box Dimensions: 2"H x 4"W x 9"L WT: 0.3 lbs UPC: 5061093900320 Quick Guide (pdf)Brochure (pdf)

Read more less

Starlink® Compatible Horizontal Cable Seal - BlackDesigned for a range of Starlink®, NMEA, and RJ45 cable and connector diameters, the DS-HSL-01-BLK Horizontal Cable Seal provides a clean, reliable cable routing solution for rooftop installations.The supplied split pre-drilled bungs allow cables with connectors already attached to pass through the seal, removing the need to cut and re-terminate connectors during installation. Multiple bung sizes and a self-drill option allow installers to customize the fit while maintaining a watertight seal easily.Based on our most popular horizontal cable seal design, the low-profile construction is impact-resistant and offers additional protection against water ingress. The horizontal cable entry keeps the cable exit as close as possible to the mounting surface, creating a neat, professional installation.Suitable for cables ranging from 2–8 mm (0.07”–0.31”), the DS-HSL-01-BLK is ideal not only for Starlink installations but also for solar panels, light bars, lighting, and other rooftop electronics.Marine Grade MaterialsManufactured from premium UV-stable, hard-wearing materials, the DS-HSL-01-BLK is built for long-term outdoor performance. Rated IP68, it delivers a guaranteed 100% watertight seal in demanding marine and outdoor environments.Easy InstallationCaptive nuts ensure a fast and reliable installation while allowing repeat fitting if required. The easy-fit cable routing system helps reduce installation time and delivers a clean, professional finish.Specifications: Material: High Impact Plastic  Height: 29mm (1.14”) Length: 88mm (3.46”) Colour: Black Cable Compatibility: Starlink Performance (Gen 3), Starlink Enterprise (Gen 3), Standard (Gen 3), Mini, NMEA cables, RJ45 cables Max Connector size: 16mm (0.62”) Bungs: 2-3mm (0.07-0.11”) / 4-5mm (0.15-0.19”) / 6-7mm (0.23-0.28”) / 7-8mm (0.28-0.31”) / 1 x Self Drill Specifications: Type: Electric Box Dimensions: 2"H x 4"W x 9"L WT: 0.3 lbs UPC: 5061093900337 Quick Guide (pdf)Brochure (pdf)

Read more less

Red 8 AWG Primary Wire - 25'Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 8 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 8 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Red Gauge: 8 AWG Length (Feet): 25' Box Dimensions: 3"H x 5"W x 5"L WT: 2.6 lbs UPC: 840248203388 Brochure (pdf)

Read more less

Dual 12 Position Male Sealed Deutsch Connector Busbar - 5/16" StudThis sealed dual-input busbar features 12 positions for Deutsch DT connectors, offering secure, waterproof connections for complex systems.Ideal for combining protected inputs and outputs in one unit, this dual DT busbar simplifies wiring in marine, off-road, and industrial applications. Built to handle harsh environments, it reduces clutter while maintaining signal integrity and power flow.The compact, molded housing resists moisture and vibration, making it perfect for high-demand electrical installations where durability and efficiency matter most. Use the dual DT busbar to streamline circuit layouts and ensure long-term reliability in sealed systems.

Read more less

Round 3 Conductor Cable - 100' - 16/3 AWG - Black, Green & WhiteRound boat cable is the ideal choice for installation in tight spaces like boat hulls. All Pacer round boat cable is manufactured in Sarasota FL, USA. Pacer's manufactured 16 AWG round boat cable is UL approved. The tinned copper conductors provide resistance to corrosion. This boat cable is the ideal multiconductor boat cable and is easy to install for many reasons. One reason it works so well is the fact that it can bend in any direction. With other, flatter cables, your range of motion is limited. It is also made from Type III finely stranded tinned copper conductors and it has flexible high-quality PVC insulation and a jacket. These things work together to make this the best boat cable available and the easiest to install in small workspaces. It also withstands the frequent vibration and flex commonly found in marine environments. Features: 16 AWG round boat cable 100 ft. of cable No. of Conductors: 3 Pacer's round boat cable is the perfect choice for a multitude of marine jobs  It's perfect for running through t-tops, sailing spars, and poling platforms  Also, it's the ideal choice for small hulls or other tight workspaces Type III, stranded, tinned copper conductors Highly flexible Easy to install and organize  Easily sealed through bulkheads Specifications: Conductor Colors: Black, green and white Conductor Stranding: 26/.0100 Jacket Color: Grey Jacket Thickness (inch): 3 conductors @ 0.045" Nom. Cable O.D. (inch): 3 conductors @ 0.395" Characteristics: Conductor: Annealed Fine Stranded Tinned Copper  ASTM B172 Class K Insulation: -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating: 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating: 600 V Resistant to: acid, alkali, abrasion, flame, gasoline, oil, and moisture Applications:Pacer's round boat cable is excellent for AC and DC internal wiring of boats and recreational vehiclesCompliances: UL Standard 1426 (BC-5W2) ABYC: E-11.16 Coast Guard: 33 CFR part 183 RoHS Compliant Specifications: Color: Black/Green/White Gauge: 16/3 AWG Length (Feet): 100' Box Dimensions: 7"H x 7"W x 8"L WT: 9.2 lbs UPC: 840248206594 Quick Guide (pdf)

Read more less

Red 2/0 AWG Battery Cable - 25' Pacer's 2/0 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier.  How?  By creating a flexible yet tough marine cable.  This 2/0 AWG marine battery cable can handle the toughest environments.  This marine battery cable is made from Type III tinned copper.  The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible PVC jacket.  These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Red Gauge: 2/0 AWG Length (Feet): 25' Box Dimensions: 6"H x 7"W x 7"L WT: 13.5 lbs UPC: 840248204316 Brochure (pdf)

Read more less

10/2 AWG Safety Duplex Cable - Flat Cable - Red/Yellow - 100'Duplex Boat Cable is used in low voltage AC applications as well as DC circuits.  Pacer manufactures 10 AWG Duplex boat cable in house in the USA for the best quality.  First, the cable is built from finely stranded, Type III tinned copper conductors.  These conductors allow for flexibility and help to prevent corrosion. The PVC jacket helps 10 AWG Duplex Boat Cable to be flexible while preventing moisture from accumulating.  How does it do that?  During the extrusion process, the spaces between wires are filled.  This leaves no space for moisture or air to accumulate.  After that, a talcum powder coating is given to the interior wires. This coating is used to allow the outer jacket to be easily removed.  Just another reason 10 AWG Duplex boat cable is perfect for marine use. Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.Features: Extruded exterior cable insulation with no gaps Highly flexible color coded wire insulation Stranded, tinned copper conductors Annealed Finely Stranded Tinned Copper ASTM B172 Class K Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 2 Type of Cable - Duplex  *Sold as an Individual Specifications: Color: Red/Yellow Gauge: 10/2 AWG Length (Feet): 100' Box Dimensions: 7"H x 7"W x 7"L WT: 12.3 lbs UPC: 840248200448 Brochure (pdf)

Read more less

Yellow 6 AWG Battery Cable - 100' Pacer's 6 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured the USA to ensure high quality.  Often times, marine applications are in enclosed areas with sharp turns.  Installation can become difficult.  Pacer simplified this process by developing flexible yet tough marine cables.  This 6 AWG marine battery cable is built to handle the harshest conditions.  All our marine cable is made from Type III tinned copper.  The copper resists corrosion and ensures the longevity of the cable.  It is then insulated with a durable and pliable PVC jacket.  These things together make it the highest quality marine battery cable available. Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Yellow Gauge: 6 AWG Length (Feet): 100' Box Dimensions: 7"H x 7"W x 7"L WT: 12.6 lbs UPC: 840248203746 Brochure (pdf)

Read more less

3118 - SMS Panel Enclosure with ELCI (50A) and 2 Blanks  - 120V ACThe 3118 panel enclosure is built for Equipment Leakage Circuit Interrupters (ELCI) main circuit breakers and other large frame devices.  Meets ABYC E-11 when used with an ELCI Main circuit breaker and mounted within 10' of AC shore power inlet.Features: Blank apertures for custom breaker loading Glass filled polycarbonate base Clear cover allows easy view of circuit breaker status Overlapping cover for strength and increased gasket protection Oversized, formed in place seamless PUR gasket Easily removable stainless steel hinge pin for unobstructed installation Stainless steel latch secures cover without penetrating the enclosure Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers Includes waterproof glands LED lights for back lighting and ON indication Technical Specifications: Circuit Breaker Type - 1 x ELCI Main  (50A) 120V and 2 x Blanks Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm) Dimensions  (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm) LEDs Installed - 1 x Red (Reverse Polarity - 120V AC and 3 x Green ON (120V AC) In the Box: 3118 Enclosure Glands x 5 Labels Mounting hardware Instruction manual *Sold as an IndividualWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

MultiPlus-II 12/3000 - 120-50 - 120V - UL ApprovedMultiPlus-II 48/3000 - 35-50 - 120V - UL ApprovedThe MultiPlus-II, an inverter/charger, combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A). It also has all the features of the MultiGrid with built-in anti-islanding and increasingly long list of country approvals.PowerAssistThe MultiPlus-II will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery.ESS: Energy Storage SystemsThe MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters.Uninterrupted AC power (UPS function)In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will operate without disruption.Remote Monitoring and ControlWhen coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backup generator and more.Specifications:  PowerControl & PowerAssist: Yes Transfer Switch: 50A Maximum AC Input Current: 50A Inverter Specifications: DC Input Voltage Range: 9,5 – 17 V Output: Output Voltage 120 VAC ± 2% / Frequency 60 Hz ± 0,1% (1) Continuous Output Power at 25°C (3): 3000 VA Continuous Output Power at 25°C: 2400 W Continuous Output Power at 40°C: 2200 W Continuous Output Power at 65°C: 1700 W Maximum Apparent Feed-In Power: 2500 VA Peak Power: 5500 W Maximum Efficiency: 93% Zero Load Power: 13 W Zero Load Power in AES Mode: 9 W Zero Load Power in Search Mode: 3 W Charger Specifications: AC Input: Input Voltage Range 90-140 VAC / Input Frequency: 45 – 65 Hz Charge Voltage 'Absorption': 14,4 V Charge Voltage 'Float': 13,8 V Storage Mode: 13,2 V Maximum Battery Charge Current (4): 120 A Battery Temperature Sensor: Yes General Specifications: Auxiliary Output: Yes (32 A) External AC Current Sensor (optional): 100 A Programmable Relay (5): Yes Protection (2): a – g VE.Bus Communication Port: For parallel, split phase and three phase operation, remote monitoring and system integration General Purpose Com. Port: Yes, 2x Remote On-Off: Yes Operating Temperature Range: -40 to +65°C (-40 – 150 °F) (fan assisted cooling) Humidity (Non-Condensing): Max 95% Enclosure Specifications: Material & Color: Steel, blue RAL 5012 Protection Category: IP22 Battery-Connection: M8 bolts 120 V AC-Connection: Screw terminals 13 mm² (6 AWG) Weight: 9 kg Dimensions (hxwxd) (mm): 578 x 277 x 148 Standards: Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, UL458 Emission, Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 *Note: For a short period of time this product was called MultiGrid-II.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 120VAC Charger Output - Amps: 50A Charger Output Voltage: 12VDC Charging Banks: 2 Inverter Cont. Output Wattage: 3000VA / 240W Inverter Input Voltage: 12VDC Inverter Output Voltage: 120VAC Outlet Qty: None Box Dimensions: 10"H x 14"W x 24"L WT: 52.22 lbs UPC: 8719076059196 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

ACS Auto Charger Selector - 12V - 80AOur Automatic Charge Selectors are smart, 100% waterproof (IP67) and compact voltage-sensing relays that automatically manage the charge function between your start and service battery banks. DOLPHIN ACS are the ideal charging-relays for outboard engine boats.SuperSafe (Unique feature)Our cutting-edge “Current Limit Function” is built on MOSFET technology and includes a one-way operating “blocking diode function”: this prevents domestic (house/service) battery voltage drop when starting your engine or bow thruster. Result: no more sensitive electronics damaged onboard (GPS, etc.).ACS is also intrinsically safe against ignition of atmospheric flammable vapours (ISO 8846), which makes it safe for installation on gasoline outboard engine boats.SuperEfficientNo more manual battery selection. No more drained batteries. Our ACS reduces amperage operating current by up to 70% in comparison with other voltage-sensing relays currently on the market. Our ACS is particularly recommended for use with Lithium batteries.100% WaterProofACS products are true Dolphins: they are IP67 certified.Other assets...With ACS, forget manual battery selection. Forget moving parts with a high failure rate. Forget battery voltage drop. Forget drained batteries. And, last but not least, DOLPHIN ACS reduces operating amperage by up to 70% in comparison with other voltage-sensing relays currently on the market.Specifications: System voltage: 12 Volts Current rating: 50 Amp Continuous / 120 Amp Peak, 80 Amp Continuous / 190 Amp Peak ACS units come with a multi-colour LED control and a remote operation switch contact Owner's Manual (pdf)

Read more less

8 AWG Heat Shrink Butt Connector - 25 PackButt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.Features: Made from tinned copper and various insulations Up to 600 Volts Not applicable to all styles Operating Temp: -55°C to 125°C UL, CSA, RoHS Compliant Benefits & Protections Impact Resistant Multiple Uses Long Term Protection Easy to Install Specifications: Wire Range: #8 AWG Insulation Color: Pink Max Wire Insulation Outer Diameter (inch): 0.35" Package Size: Twenty-five Specifications: Heat Shrink: Yes Package Qty: 25 Post Size: #8 Type: Butt Connectors Box Dimensions: 2"H x 3"W x 5"L WT: 0.35 lbs UPC: 840248206679 Quick Guide (pdf)

Read more less

MultiPlus Compact 12/2000/80-150 120V VE.Bus UL ApprovedThe MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Unique PowerAssist FeatureThe MultiPlus will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery. Uninterrupted AC Power (UPS Function)In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually Unlimited Power Thanks To Parallel OperationUp to 6 Multis can operate in parallel to achieve higher power output. Three-phase or split-phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase, and split-phase capabilities. Remote Monitoring & ControlWhen coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop, or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto-starting a backup generator and more… Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Black 6 AWG Battery Cable - 100' ANCOR Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing. ANCORs proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600V, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter boat (CFR Title 46) and ABYC standards WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Length (Feet): 100' Gauge: 6 AWG Box Dimensions: 5"H x 11"W x 11"L WT: 13.2 lbs UPC: 091887111286 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Fuse MIDI/AMI 70A - PairFeatures: Compact fuse with 70A amperage Tin-plated copped for corrosion resistance Clear cover offers visible indication of blown fuses Color-coded for easy amperage identification Ignition protected to SAE J1171 when used with Blue Sea Systems SafetyHub family of products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 70a Fuse Type: MIDI/AMI Type: Fuses Box Dimensions: 1"H x 2"W x 3"L WT: 0.05 lbs UPC: 632085052546 Brochure (pdf)

Read more less

Flip Pro Max - Dual USB-C Charge SocketDesigned for use with either a 12V or 24V input and features 2x 60W USB-C charging ports. It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops, large tablets, phones, and any other USB-C-powered devices onboard.Features: When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements Red LED running light Universal: Universal fit for any USB-C connectors Fast charge (60W max) up to 2 devices at a time Installation: Easy Install, using a Ø32mm (1.25 in.) hole saw Supplied as standard with an optional front fit bezel Marine Ready: IPX4 waterproof with the cover closed UV resistant 316 stainless steel hinge and spring Key Information: To maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12V or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops Specifications: IP Rating: IPX4 waterproof when lid is closed Input Voltage: 10-30V DC (12/24V System) Input Current Max: 6A (10A fuse recommended) Standby Power Draw: 0.01W USB – C Output: 60W max on a 24V system / 36W max on a 12V system Quick Guide (pdf)

Read more less

DS-H6-BLK Horizontal Cable Seal - Black *3-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installtion. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Three (3) Pack Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.45 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

DS-H6-BLK Horizontal Cable Seal - Black *5-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Five (5) Pack Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.75 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

DS-H6-BLK Horizontal Cable Seal - BlackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.15 lbs UPC: 5060114797390 Quick Guide (pdf)Brochure (pdf)

Read more less

SB-8-5 Junction BoxScanstrut's SB-8-5 Junction Box is perfect for installations if you need to create a waterproof connection for multiple electrical cables.Heavy-duty junction box manufactured from marine grade polypropylene and with features 5 screw-down terminals.Depending on the number of terminations required the terminal blocks can be individually fitted or blocked together.  Supplied with 5 modular terminal blocks.  Offering 5 terminations.Cables push fit into the terminals and are secured with a sprung leaf retention system that does not damage the wire.  The terminal can be removed for easy fitting of cables. Features: Provides 5 screw-down terminals. Capacity for up to eight (8) cables to enter the box. Watertight Installation - Cables are quickly routed into the box through an IP66 elastomeric membrane, guaranteeing protection against water ingress. Upgradable to IP68 with use of SB-2G Cable Seals (sold separately)  Technical Specifications: Maximum cable size (diameter) - .50" (12 mm)   Maximum wire size - 16/1.5 to 11/4 Dimensions (L x W x H) - 3.35" x 3.35" x 2" (85  x 85 x 50 mm) Five (5) terminal block w/400 V rating and 32 A Color - Grey Material - Marine grade polypropylene In the Box: Junction box w/five (5) screw-down terminal block Mounting hardware Installation manual *Sold as an Individual Specifications: Type: Junction Box Box Dimensions: 3"H x 5"W x 7"L WT: 0.3 lbs UPC: 5060114793439 Quick Guide (pdf)Brochure (pdf)

Read more less

Red 3/0 AWG Battery Cable - Sold By The Foot ANCOR Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing. ANCORs proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600V, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter boat (CFR Title 46) and ABYC standards WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red Length (Feet): Sold By The Foot Gauge: 3/0 AWG Box Dimensions: 1"H x 1"W x 12"L WT: 0.6 lbs Owner's Manual (pdf)

Read more less

22mm Inrush Switch OFF-(ON)Upgrade your boat’s electrical system with the 22mm Inrush Protection Switch. Built tough for marine conditions and engineered for seamless operation. Featuring ultra-bright LED indicators, a waterproof stainless steel body, and high-load surge protection up to 120A, this switch keeps your systems running safely and efficiently. Whether you need reliability for critical functions or a sleek, professional look, Bluewater’s switch delivers both. Easy to install, impact-resistant, and designed to last, because when you’re on the water, only the best will do.Features: Power Capacity: 20A max (1 channel) | 10A max per channel (2 channels) Night Visibility: Blue LED back light for clarity; turns red when active Built to Last: SS316 stainless steel body, IP69K waterproof rating Extreme Durability: Salt spray (EN ISO 9227-17) & 20g shock tested Heat & Safety: UL 94 V2 flammability-rated, withstands up to 105°C Smart Indicator: LED turns red automatically when the pump is running OFF (Blue), 1st On (Red), 2nd On (Purple) Specifications: Action: (ON)-OFF Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs

Read more less

Yellow 18 AWG Primary Wire - 500' Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 18 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 18 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Yellow Gauge: 18 AWG Length (Feet): 500' Box Dimensions: 4"H x 7"W x 7"L WT: 6 lbs UPC: 840248201278 Brochure (pdf)

Read more less

Speaker Wire - 12 AWG 328' (100M) Roll The Fusion marine speaker cable range is specifically engineered for use on boats and ensures the best listening experience with your Fusion speakers and subwoofers. The speaker cable was specifically designed for the marine environment with high-quality materials to help protect the cable from the elements.Ideal for connection with your Fusion marine speakers and subwoofers, the speaker cable features tinned copper wiring with parallel conductors for superior performance. The all-copper wire construction ensures the audio signal is transmitted with minimal resistance, delivering a higher-quality audio signal to your onboard speakers and subwoofers.The result is a superior speaker cable that delivers reliable performance in the harsh marine environment, season after season.  Features: Construction: Multistrand:  Tinned Copper Cable with PVC Jacket Temperature Rating:  105 °C (221 °F) dry or 90 °C (194 °F) wet Fire Retardant Rating:  VW-1 Voltage Rating:  600 V max. Oil Resistance:  Yes Warranty:  1 Year WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 328' Gauge: 12 AWG Color: White Box Dimensions: 6"H x 10"W x 10"L WT: 19.25 lbs UPC: 753759261665 Brochure (pdf)

Read more less

Speaker Wire - 12 AWG 50' (15.24M) Roll The Fusion marine speaker cable range is specifically engineered for use on boats and ensures the best listening experience with your Fusion speakers and subwoofers. The speaker cable was specifically designed for the marine environment with high-quality materials to help protect the cable from the elements.Ideal for connection with your Fusion marine speakers and subwoofers, the speaker cable features tinned copper wiring with parallel conductors for superior performance. The all-copper wire construction ensures the audio signal is transmitted with minimal resistance, delivering a higher-quality audio signal to your onboard speakers and subwoofers.The result is a superior speaker cable that delivers reliable performance in the harsh marine environment, season after season.    Features: Construction: Multistrand:  Tinned Copper Cable with PVC Jacket Temperature Rating:  105 °C (221 °F) dry or 90 °C (194 °F) wet Fire Retardant Rating:  VW-1 Voltage Rating:  600 V max. Oil Resistance:  Yes Warranty:  1 Year WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 50' Gauge: 12 AWG Color: White Box Dimensions: 2"H x 7"W x 8"L WT: 2.9 lbs UPC: 753759223809 Brochure (pdf)

Read more less

Desktop Switching Power Supply - 120VAC Input, 12V Output, 10 AmpThis high efficiency UL-60950-1 approved AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 10 Amps with an AC input of 120 Volts, 60 Hz (230 Volts, 50 Hz model also available). These advanced switch-mode DC power supplies were designed specifically for use with land mobile radio. The power supplies produce clean reliable power and are highly filtered to suppress RFI. The unit comes with a detachable power supply cord with NEMA 5-15P plug. Features include over-current, short-circuit and over-voltage protection. The AC-DC power supply conforms to FCC Part 15(B), class B digital device.Features: Advanced switch-mode technology Reliable power with minimum weight and size Circuit innovations minimize output voltage ripple and RFI Input voltage can be set at 120VAC or 240VAC (internal jumper) UL listed to both USA & Canadian safety standards Specifications: Input: 100-130 VAC Output: 13.8 VDC Amps: 10 Amps Fuse: 3 Amps Weight: 3.4 (lbs) Weight: 1.54 (kg) Dimensions: 8.19 x 7.28 x 2.4 (in) Dimensions: 20.8 x 18.5 x 6.1 (cm) Safety: UL, FCC Warranty: 3 Year Limited Applications: Two way radio base stations Communications systems Security systems Test equipment Plotters GPS receivers Automotive & Marine displays DC computers 12 Volt lighting systems OEM applications WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

25A Battery Charger - 24V - 2-Bank - 3-Stage w/Dip Switch & Lugs - Includes Temp SensorThis advanced fully automatic three-stage 25 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit, reverse polarity and thermal overload protection. The unit allows charging of up-to 2 separate battery banks.Features: Switch mode technology for high efficiency, lightweight and quiet operation Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell Can charge 2 banks of batteries simultaneously, no isolator necessary Can be used as a power supply or DC UPS when used in conjunction with a battery User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries “Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries Voltmeter and Ammeter for monitoring Fan cooled based on output current Protections: Short circuit, overload, reverse battery connection and over temperature Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively Specifications: Input: 120 VAC or 230 VAC Output: 24 VDC Amps: 25 Remote Control: 900-RC Weight: 9 (lbs) Weight: 4.1 (kg) Dimensions: 13.03 x 9.6 x 3.82 (in) Dimensions: 331 x 244 x 97 (mm) Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B Warranty: 2 Year Limited Applications: Test bench Automotive Marine Communications sites Battery back-up systems Hobby WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Output Voltage: 24v Charger Output - Amps: 25a Charging Banks: 2 Portable: No Charger Input - Voltage: 120/240v Box Dimensions: 6"H x 11"W x 17"L WT: 11 lbs UPC: 622988083068 Owner's Manual (pdf)Brochure (pdf)

Read more less

450W Modified Sine Wave Inverter - 12VSAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz. Connect through any 12V lighter socket in your car, boat, truck or RV.Includes two three prong outlets and a USB Charging Port.ETL safety listed.Features: USB charging port: 5 VDC, 2.1A 2 three prong outlets 2 X Surge Compact design Cigar lighter plug and battery clamps included Load controlled cooling fan Low battery input alarm Universal protection circuit: thermal, battery, overload, short circuit, earth fault Soft start technology Cool surface technology Low interference technology Specifications: Input: 12 VDC Output: 115 VAC Watts: 450 Surge: 900 Watts Outlets: 2 Weight: 1.6 (lbs) Weight: 0.7 (kg) Dimensions: 5 x 6 x 2 (in) Dimensions: 12.7 x 15.2 x 5.1 (cm) Safety: ETL Warranty:2 Year Limited Applications: Television (up to 32") Blender Laptops Cell Phones Cameras MP3 Players Handheld Video Games Lights/Lamps Portable Stereos CD/DVD Players WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 450w Inverter Input Voltage: 12v Waveform: Modified Sine Wave Box Dimensions: 4"H x 7"W x 10"L WT: 2 lbs UPC: 622988078088 Owner's Manual (pdf)Brochure (pdf)

Read more less

On/Off Switch Battery Switch - Surface Mount - RedSimple, reliable, and built for tough environments, this On/Off Battery Switch provides secure control of power to a single circuit. It’s ideal for isolating batteries or equipment when not in use, helping to ensure safety and prevent unwanted battery drain. Ignition-protected and safe for use aboard gasoline-powered boats, this switch is well-suited for both marine and RV applications. The versatile case design allows for surface, front panel, or rear panel mounting.Constructed from all non-corrosive marine-grade metals and molded in reinforced polycarbonate, it delivers long-lasting durability in harsh conditions. Tactile knob textures allow users to confirm switch position by feel, and the included international ON/OFF label and ICON label set make circuit identification easy and intuitive.Specifications: Continuous Rating: 300 Amps DC Intermittent Rating: 500 Amps DC (5 min) Cranking Rating: 900 Amps DC (30 sec) Max Voltage: 40VDC Cable Size: 4/0 AWG Specifications: Continuous Amperage: 300 Positions: 2 Box Dimensions: 4"H x 6"W x 9"L WT: 0.7 lbs UPC: 810196331150 Quick Guide (pdf)

Read more less

2 Position Bus/Base Cover OnlyBluewater Bus/Base Cover for Dual Stud Busbar 3/8". Specifications: Type: Covers Box Dimensions: 2"H x 2"W x 7"L WT: 0.1 lbs UPC: 810196330559

Read more less

PowerPlus 12V 26 AMP On-Board Lithium Compatible Battery Charger & MaintainerThe Battery Tender PowerPlus high voltage chargers provide increased power in a compact package.  Designed with a rugged, weather resistant exterior, this line of Battery Tender chargers is designed with Marine and Industrial applications in mind.Stay ChargedThis 26 AMP Charger provides a full charge to your 12V battery series before automatically switching to float mode maintaining proper voltage levels without overcharging. ProtectedRated IP68 weather resistant and shock and vibration resistant; with safety features including spark-proof and reverse charging protection.    Connect and ForgetWith a low maintenance design, our universal vehicle charger and maintainer is compact, lightweight, and easy to operate even in small storage space for your convenience    Safe and SecureSpark-proof during lead connection and automatically detects reverse polarity to ensure a correct, locked-in connection before providing power. Charges & MaintainsGolf Carts, RVs, 12 Volt Trolling Motor BatteryBattery CompatibilityAGM, GEL, Lithium, Standard (Sealed or Flooded Lead Acid)Included in the Box: 12V, 26 AMP Battery Charger Mounting Hardware Ring Terminal Cables with 40A Fuse Reach Over 12 Ft Total Reach AC Power Cord Length: 6.5 Ft - 10 AWG DC Output Cord Length: 5 Ft - 10 AWG DC Accessory Length: 1 Ft Specifications: Dimensions: 11.9" x 7.5" x 3.2", 9.3 lbs Output: 12v @ 26 amp Output Current Range: > 10 amps Input: 120v AC @ 50/60hz Warranty: 2 Years Certifications: ETL & CETL FCC, ICES, CEC, DOE IP Rating: IP68  Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 26a Charger Output Voltage: 12v Charging Banks: 1 Portable: No Box Dimensions: 4"H x 11"W x 15"L WT: 11.1 lbs UPC: 734357220117 Owner's Manual (pdf)

Read more less

160-Piece Heat Shrink Terminals & Connectors KitWire management kit including 160 pieces of heat shrink terminals and connectors.Includes:Butt Connectors: (10) 22-18 AWG, (20) 16-14 AWG (10) 12-10 AWG Ring Terminals: (15) 22-18 AWG #10, (15) 16-14 AWG #8 (15) 16-14 AWG #10, (15) 16-14 AWG 1/4" (10) 12-10 AWG #10, (10) 12-10 AWG 1/4" (10) 12-10 AWG 3/8" Disconnects: (20) 16-14 AWG female (10) 16-14 AWG male WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Package Qty: 160 Heat Shrink: Yes Type: Kits Box Dimensions: 2"H x 7"W x 11"L WT: 1.1 lbs UPC: 091887990751

Read more less

These inverters provide AC power source onboard trucks, RVs and boats. Featuring high surge capability, they are ideal for users who may need to power multiple loads such as appliances, power tools and other onboard electronics at the same time. The NEW XPower Inverters are certified to CSA standard C22.2 No. 107.1-01 and UL 458.Mobile Power for Trucks, RVs and BoatsXPower Inverters connect easily to 12 volt batteries to provide AC power for a variety of medium to heavy duty applications. Designed for easy installation and operation, the XPower inverters provide a reliable source of power onboard trucks, RVs and boats to run home appliances, consumer electronics, entertainiment systems, power tools, office equipment and much more. They are also suitable for small contractors who need to operate handheld power tools from their van or pick-up truck. All models meet the stringent UL458 regulatory requirements. Product Features: Portable power for AC products Two GFCI AC receptacles for connecting multiple loads High surge capacity for products that require more power to start High efficiency - converts virtually all the battery's available power to AC Mounting brackets for convenient installation Heavy duty stud connectors Remote on/off switch included Protection Features: Overload and over temperature shutdown Over voltage protection (15.0 VDC) Low voltage alarm (11.0 VDC) Low voltage cut-out (10.5 VDC) Product Applications: Household Appliances: compact microwave ovens, bread makers, food processors, small bar refrigerators, small vacuum cleaners, fluorescent and incandescent lights, sewing machines and fans Handheld Power Tools: drills, jigsaws, sanders and buffers Entertainment Electronics: televisions, VCRs, video games, stereos, musical instruments and satellite equipment Office Equipment: computers with 17" monitors, facsimile machines WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 2 Duplex GFCI Inverter Surge Rating: 5000w Inverter Input Voltage: 12v Waveform: Modified Sine Wave Inverter Output Voltage: 115v +/- 5% AC Connection Type: Hardwire Inverter Cont. Output Wattage: 2500w Box Dimensions: 8"H x 12"W x 24"L WT: 15.75 lbs UPC: 715535896553 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

6/2 AWG Safety Duplex Cable - Flat Cable - Red/Yellow - 100'Duplex Boat Cable is used in low voltage AC applications as well as DC circuits.  Pacer manufactures 6 AWG Duplex boat cable in house in the USA for the best quality.  First, the cable is built from finely stranded, Type III tinned copper conductors.  These conductors allow for flexibility and help to prevent corrosion. The PVC jacket helps 6 AWG Duplex Boat Cable to be flexible while preventing moisture from accumulating.  How does it do that?  During the extrusion process, the spaces between wires are filled.  This leaves no space for moisture or air to accumulate.  After that, a talcum powder coating is given to the interior wires. This coating is used to allow the outer jacket to be easily removed.  Just another reason 6 AWG Duplex boat cable is perfect for marine use. Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.Features: Extruded exterior cable insulation with no gaps Highly flexible color coded wire insulation Stranded, tinned copper conductors Annealed Finely Stranded Tinned Copper ASTM B172 Class K Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 2 Type of Cable - Duplex  *Sold as an Individual Specifications: Color: Red/Yellow Gauge: 6/2 AWG Length (Feet): 100' Box Dimensions: 10"H x 10"W x 10"L WT: 33 lbs UPC: 840248200554 Brochure (pdf)

Read more less