ROKK 10W Waterproof Wireless Charger - Surface MountThe IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit.Working directly with 12/24V systems, ROKK Wireless is ideal for life on the move and is perfect for sail and powerboats, and also RV.  Easy install, anywhere you need your phone - indoors or out.  No more wires! Exceeding the latest and highest standards of the Qi wireless protocol, ROKK Wireless is independently certified to deliver ultra-safe, wireless charging anywhere on board.Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps.Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments.With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions.Sub-surface, hidden from view but always ready to charge.  Engineered to be installed under the surface and leave the top surface un-cluttered and looking perfect. Simply etch in your logo to identify the charge location. Ideal for GRP or wood, the unit can be installed under tables, cabinets, consoles, or worktops.  The installation system is simple to install and works with various panel depths and materials.Case Compatibility:ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm)Features: Installation is simple on any boat, RV, ATV or outdoor location.  Four screws secure the unit onto any flat surface with a simple installation guide and drilling template.  A waterproof cable pass-through completes the IPX6 sealed installation. Compatible with all Qi Wirelessly charging electronics. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1.A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (W x H) - 3.86" (98mm) x .67" (17mm) In the Box: Charger Mounting hardware Instruction manual  *Sold as an Individual Specifications: Type: Chargers Box Dimensions: 2"H x 6"W x 9"L WT: 0.4 lbs UPC: 5060114798083 Quick Guide (pdf)

Read more less

Red 4 AWG Battery Cable - Sold By The Foot Pacer's 4 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Oftentimes, marine applications are in enclosed areas with sharp turns. Installation can become difficult. Pacer simplified this process by developing flexible yet tough marine cables. This 4 AWG marine battery cable is built to handle the harshest conditions. All our marine cable is made from Type III tinned copper. The copper resists corrosion and ensures the longevity of the cable.  It is then insulated with a durable and pliable PVC jacket. These things together make it the highest quality marine battery cable available. Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold by the Foot Specifications: Color: Red Gauge: 4 AWG Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 12"L WT: 0.1 lbs Brochure (pdf)

Read more less

Freedom X GFCI OptionFeatures: Adds fault protected outlet to the Freedom X/XC Includes factory wired connector WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pre-Charge CableThe Pre-charge Cable allows internal capacitors of an inverter, inverter/charger, or MPPT to be pre-charged via the DC terminals before connecting the battery. This method ensures that connecting the battery will not result in arcing at the connection point.Please contact your dealer for any returns, repairs or support issues related to this product.

Read more less

Argodiode Battery Isolator 80-2SC - 2 Batteries - 80AArgodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high-efficiency Schottky diodes.The Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current, the voltage drop is approximately 0,3 V, and at the rated output of approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. Simply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely. Alternator energize input Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run/stop switch is closed.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

MEGA-Fuse 150A/80V Ceramic (Package of 5 Pieces)Victron Energy supplies a range of fuse holders and fuses to suit a wide range of installations, and the MEGA fuses are frequently used in Victron Energy DC distribution systems. This particular pack of ceramic Victron MEGA fuses contains FIVE 150-amp fuses.Features:For 48V productsSpecifications: Max Current Rating: 150 amps Max Voltage Rating: 80 volts Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Amperage: 150a Fuse Type: MEGA/AMG Type: Fuses Box Dimensions: 1"H x 3"W x 4"L WT: 0.2 lbs UPC: 8719076061687 Quick Guide (pdf)

Read more less

RJ45 UTP Cable - 0.9MA cable to connect Digital Multi Control, Inverter Control, Interface MK3-USB, and VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.

Read more less

6" Cable Tie - Black - 30-40lb Tensile Strength - 1.5" Bundle Diameter - 100 Piece BagCable ties are one of the most common wire management used today. They are found in a variety of industries where they are used to secure wire bundles, cables, or other surfaces. They are known for their ease of installation and are built to last in tough environments. Made from Nylon 6.6, the white cable ties are built for indoor use and the black cable ties are meant for both indoor and outdoor usage. Cable ties are some of the most widely used bundling and harness materials available. Features: Natural: For indoor use Black: For indoor or outdoor use (UV resistant) The curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed up installation Applications: Cable ties are the most widely used and versatile bundling and harnessing material available Used to secure a cable bundle to another surface such as a control panel, communication rack, wall, or ceiling Compliances: UL Listed, CSA Flammability UL 94V-2 RoHS & CE compliant Characteristics: 6.6 Nylon (Nat. & UV res. Black) Max. Cont. Temp. 185 °F (85 °C) Min. Cont. Temp. -76 °F (-60 °C) Screw Size #4 to #10 Specifications: Type: Cable Ties Box Dimensions: 1"H x 6"W x 9"L WT: 0.3 lbs UPC: 840248216616 Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 1-1/2" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 1-1/2” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 6"W x 6"L WT: 0.6 lbs UPC: 840248216319 Brochure (pdf)

Read more less

Tinned Lug 1 AWG - 5/16" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 1 Stud Size: 5/16” Length: 1.719” Width: 0.692” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 1 AWG Heat Shrink: No Package Qty: 10 Post Size: 5/16" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.35 lbs UPC: 840248205474 Brochure (pdf)

Read more less

DT Deutsch Receptacle Repair Kit - 14-18 AWG (2 Position)Pacer's DT repair kits use the larger size 16 contacts (Deutsch Pin P/N 0460-215-16141, Socket P/N 0462-209-16141) for applications using 14 AWG wire. However, DT series connectors are designed for 18-14 wire gauge applications. The DT series offers electrical designers the ability to use multiple sizes of 16 contacts (18-14 AWG) each with a 13-amp continuous capacity, within a single shell. Pacer also sells these other components for use in a wider range of applications.Features: Packs include all parts needed to assemble a connector One to two extra terminals Cavity plugs to seal open circuits Applications: Wire-to-wire applications Enclosed connectors offer field-proven reliability and rugged quality Compliances: Ingress Protection (IP) Level: IP68 and IP6K9K EU RoHS/ELV Standard UL-94 Recognized Characteristics: Wedge locks ensure contact alignment and retention Redundant Silicone Seals Hand-insertable and removable contacts Technical Specifications: Number of Cavities: 2 Housing: Rectangular receptacle, plastic reinforced with glass fiber Contact Size: 16 (13 amp) Wire Size: 14 AWG Holds Pin/Socket: Pins Operating Temperature: -55°C to 125°C  Contents:  (1) 2 pos. receptacle (1) 2 pos. wedge lock (3) pins Quick Guide (pdf)

Read more less

Yellow 4 AWG Battery Cable - 100' Pacer's 4 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Oftentimes, marine applications are in enclosed areas with sharp turns. Installation can become difficult. Pacer simplified this process by developing flexible yet tough marine cables. This 4 AWG marine battery cable is built to handle the harshest conditions. All our marine cable is made from Type III tinned copper. The copper resists corrosion and ensures the longevity of the cable.  It is then insulated with a durable and pliable PVC jacket. These things together make it the highest quality marine battery cable available. Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Yellow Gauge: 4 AWG Length (Feet): 100' Box Dimensions: 7"H x 7"W x 8"L WT: 18 lbs UPC: 840248203890 Brochure (pdf)

Read more less

Black 1/0 AWG Battery Cable - 50' Pacer's 1/0 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier.  How?  By creating a flexible yet tough marine cable.  This 1/0 AWG marine battery cable can handle the toughest environments.  This marine battery cable is made from Type III tinned copper.  The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible PVC jacket.  These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Black Gauge: 1/0 AWG Length (Feet): 50' Box Dimensions: 7"H x 10"W x 10"L WT: 22.8 lbs UPC: 840248204187 Brochure (pdf)

Read more less

Water Resistant Contura Switch - (ON)-OFF-ON - GreyFeatures: Vibration, shock, thermoshock, moisture, and salt spray resistant Specially manufactured for mounting in Blue Sea Systems' water-resistant panels Ignition Protected - Safe for installation aboard gasoline-powered boats Meets UL1500 and ISO8846 ignition protection requirements WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Grey Throw/Pole: DPDT Action: (ON)-OFF-ON Box Dimensions: 2"H x 3"W x 4"L WT: 0.09 lbs UPC: 632085082215

Read more less

Zeus A275L 3.15 Alternator with Isolated Ground & Terminal BlockThe highest power output alternator in its size/class. Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance. Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote, keeping the A275L cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Models available with internal/external voltage regulator. Proudly made in the U.S.A. Technical Specifications: Voltage - 12v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 14.9 lbs/6.7 kg Regulation - Internal/External (Internally regulated with adaptor for optional external regulation.) Output Voltage - 14.1v (Default) Finish - (Black) Cerakote or E-coating Cut-In RPM - 1,061 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) - 311 Amps Sustained Cruising Output (Hot, 6,000 RPM) - 227 Amps Sustained Idle Output (Hot, 3,000 RPM) - 198 Amps Max Continuous Operating Temperature - 110°C / 230°F Mounting Application:Replaces most small case styles using a 3.15" saddle style mount (e.g., Hitachi, Lucas, Mitsubishi). Most Yanmars. Requires Standard single "V" belt upgrading to a Serpentine System Quick Guide (pdf)Brochure (pdf)

Read more less

Zeus A275L 3.15 Alternator with Case Ground (Common Rail) & Terminal BlockThe highest power output alternator in its size/class. Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance. Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote, keeping the A275L cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Models available with internal/external voltage regulator. Proudly made in the U.S.A. Technical Specifications: Voltage - 12v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 14.9 lbs/6.7 kg Regulation - Internal/External (Internally regulated with adaptor for optional external regulation.) Output Voltage - 14.1v (Default) Finish - (Black) Cerakote or E-coating Cut-In RPM - 1,061 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) - 311 Amps Sustained Cruising Output (Hot, 6,000 RPM) - 227 Amps Sustained Idle Output (Hot, 3,000 RPM) - 198 Amps Max Continuous Operating Temperature - 110°C / 230°F Mounting Application:Must be used on Yanmar Common Rail introduced after 2013 (JH-CR, 3JH40, 4JH45, 4JH57, 4JH80, 4JH110) Quick Guide (pdf)Brochure (pdf)

Read more less

MultiPlus 12/1200 - 50-16 - 120V - VE. BusThe MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below.Parallel Operation and Three-Phase CapabilityUp to six Multis can operate in parallel to achieve higher power output.  In addition to parallel connection, three units can be configured for three-phase output.  PowerControl - Dealing with Limited Generator, Shore Side or Grid PowerWith the Multi Control Panel, a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.  PowerAssist - Boosting the Capacity of Shore or Generator PowerThis feature takes the principle of PowerControl to a further dimension. It allows MultiPlus to supplement the capacity of the alternative source. Where peak power is often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load is reduced, the spare power is used to recharge the battery.  Four Stage Adaptive Charger and Dual-Bank Battery ChargingThe main output provides a powerful charge to the battery system using advanced ‘adaptive charge’ software. The software fine-tunes the three-stage automatic process to suit the condition of the battery and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Charger datasheet and Victron's website under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery.  High Start-Up PowerIt is needed to start high-inrush loads such as power converters for LED lamps, halogen lamps, or electric tools.  Search ModeWhen Search Mode is ‘on’, the power consumption of the inverter in no-load operation is decreased by approx. 70%. In this mode, the Multi, when operating in inverter mode, is switched off in case of no load or very low load and switches on every two seconds for a short period. If the output current exceeds a set level, the inverter will continue to operate. If not, the inverter will shut down again.Programmable RelayBy default, the programmable relay is set as an alarm relay, i.e. the relay will de-energize in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low).  Remote On/Off/Charger OnThree pole connector.  On-Site System Configuring, Monitoring, and ControlAfter installation, the MultiPlus is ready to go. Some settings can be changed with DIP switches. 500/800/1200VA models: remote switch/battery charge voltage/inverter frequency/search mode. 1600/2000VA models:  battery charge voltage/search mode. For more settings use VE-Config or the VE. Bus Smart dongle.  Remote Configuring and MonitoringInstall a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on Victron's VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Specifications: PowerControl: Yes PowerAssist: Yes Transfer Switch (A): 16 Inverter Specifications: Input Voltage Range (V DC): 9,5 – 17 V Output voltage: 120 VAC, ± 2%  Continuous Output Power at 25°C (VA): 1200 Continuous Output Power at 25°C (W): 1000 Continuous Output Power at 40°C (W): 900 Continuous Output Power at 65°C (W): 600 Peak Power (W): 2400 Maximum Efficiency (%): 93 Zero Load Power (W): 13 Zero Load Power in Search Mode (W): 4 Charger Specifications: AC Input voltage range 95 - 140 V AC Input Frequency range: 55-66Hz Charge Voltage Absorption (V DC): 14,4  Charge Voltage Float (V DC): 13,8  Storage Mode (V DC): 13,2 Charge Current House Battery (A): 50  Charge Current Starter Battery (A): 1 Battery Temperature Sensor: Yes General Specifications: Programmable Relay: Yes (1x) Protection: a - g VE.Bus Communication Port: For parallel and three-phase operation, remote monitoring and system integration  (RJ45-splitter ASS030065510 needed for 500 / 800 / 1200 VA models) Remote On-Off: On/off/charger only DIP Switches: Yes Internal DC Fuse: 200A Operating Temperature Range: -40 - +65°C / -40 to 150°F (fan-assisted cooling), Humidity (non-condensing) max 95% Enclosure Specifications: Common Characteristics: Material & Color: aluminum (blue RAL 5012) / Protection category: IP 21 Battery-Connection: 35 mm² AC-Connection: G-ST18i connector Weight: 8.2 kg (18.1 lbs) Dimensions (H x W x D): 406 x 250 x 100 mm / 15.98 x 9.84 x 3.94 in. Standards: Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1 Emission, Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3  Automotive Directive: ECE R10-5 Protection: Output short circuit, Overload, Battery voltage too high, Battery voltage too low, Temperature too high, 230VAC on inverter output, Input voltage ripple too high Non-linear load, crest factor 3:1                                                                               Up to 25°C ambient                                                                                                                          Programmable relay which can be set for: general alarm, DC under voltage or generator start/stop        signal function. AC rating: 4 A at 120 V DC rating: 4 A up to 35 V, 1 A up to 60 V For parallel and three-phase operation an RJ45-splitter ASS030065510 is needed. Select remote behaviour, battery charge voltages and/or search mode Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

7457 UL-489 Circuit Breaker - 20A Flat RockerSuitable for use when UL-489 specifications are required (Navy, Army, or Coast Guard vessels, and other vessels covered under CFR 46).Specifications: Amperage: 20A AC Actuator Style: Flat Rocker Poles: 1 Maximum Voltage: 240V AC Circuit Breaker Type: Magnetic Hydraulic - Trip Free Terminal Type:  #10-32 Screw Tin-Plated Brass  Interrupt Capacity: 5000A Specifications: Amperage: 20a Box Dimensions: 2"H x 3"W x 4"L WT: 0.26 lbs UPC: 632085074579

Read more less

120/240v AC Main(1) 50A C-Series Toggle 3 Pole MainFeatures: Red reverse polarity indicating LED All neutral and safety ground buses installed Label backlighting pre-installed All LEDs installed Maximum panel Amperage - 50 Amperes WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Max Breaker Quantity: 1 AC/DC: AC Voltage: 120/240v Box Dimensions: 5"H x 6"W x 9"L WT: 1.4 lbs UPC: 632085073725 Quick Guide (pdf)

Read more less

8262 Waterproof Panel 4 Position - Slate GreyFeatures: Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions Designed for flybridge and open cockpit applications ON-OFF Contura Switches ON indicating LEDs embedded in switches Watertight mounting gasket included Countersunk mounting holes throughout Two-part polyurethane slate gray finish Industry standard height and width Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion Completely wired and ready to install Specifications: Weatherproof: Water Resistant Positions: 4 Nominal Voltage: 12v / 24v Panel Cumulative Rating: 45A Switch Rating: 20A @ 12v DC / 15A @ 24v DC Height: 3.75" Width: 5.25" Depth: 3" Included: (4) 5021 Panel Mount AGC/MDL Fuse Holder (1) 8214 Black 60 Label Set (4) 8230 Contura Switch SPST Gray - Off-On WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Waterproof: Resistant AC/DC: DC Max Breaker Quantity: 4 Voltage: 12/24v Box Dimensions: 5"H x 7"W x 9"L WT: 0.8 lbs UPC: 632085082628 Owner's Manual (pdf)

Read more less

Mini OLED DC VoltmeterMonitors DC voltage on a bright, waterproof, daylight readable OLED screen Compact size enables mounting in any convenient location IP66 waterproof Reverse polarity protected Mounts in a common 1-1/8 in hole Specifications Meter: Voltage Nominal Voltage:12V/24V DC Resolution: 0.01DC Input Voltage Range: 8-36V DC Operating Current: 15mA Voltage Accuracy:±1.0% WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

AC / DC Single Pole Magnetic World Circuit BreakerThe World Circuit Breaker meets all American Boat and Yacht Council (ABYC) Standards, is UL 1077 Recognized, TUV Certified, CE marked for Europe, and CSA Certified for Canada.PN:   7205Color:   RedAmperage:   10 AmpDelay:   StandardFeatures: The industry standard circuit breaker for Blue Sea Systems electrical panels Combines switching and circuit protection into a single device Single pole Quick Trip models are designed specifically for electronics protection "Trip Free" design cannot be held "ON" during fault current condition Specifications    Circuit Breaker Type Magnetic Hydraulic - Trip Free Maximum Voltage 277 Volts AC / 65 Volts DC Rated Switch Cycles 10,000@rated amperage and voltage WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 10a Box Dimensions: 1"H x 3"W x 5"L WT: 0.17 lbs UPC: 632085072056

Read more less

Ventura Series SAT ConnectionNeed a quick and dependable outdoor TV connection? The Scanstrut Ventura Series TV Aerial Connection is built for adventure, delivering rugged durability and seamless access to your favorite channels, wherever the road takes you.Working seamlessly with the rest of the Ventura Series, integrating power, water, solar, and more into a single, cohesive design language.With its compact, weatherproof design, this outdoor TV aerial connector makes it easy to enjoy portable TVs, outdoor movie nights, or live events right outside your RV. Whether you're parked by the beach or relaxing in the mountains, you'll always have a clear, reliable signal on hand.Simple and hassle-free to use, just park, lift the waterproof cover, and plug in your aerial cable for instant entertainment.Built for Durability & Performance: Marine-grade 316 stainless steel for long-lasting toughness IP68 & IP69K waterproofing and UV protection for all weather reliability Fixed connection ensures zero signal loss, even with repeated use Designed with Scanstrut's trusted marine engineering, the Ventura Series offers a sleek, uniform design that pairs perfectly with our other Ventura Series exterior sockets - TV, power, water, solar, and more.Features:  IP68, IP69K Waterproof (Cover Closed) Standard 38mm (1.50”) Holesaw Installation 90° Holding Bump-Feature UV Resistant Built-in gasket for a watertight seal Spring-loaded lid Easy install Specifications: Connection Type: Dual F-Type Coaxial Connector Material: Nickel-Plated Brass Impedance: 75Ω Applications: Satellite & TV Systems Waterproof Rating: IP68, IP69K Front only when lid closed Cable Length: 500mm (19.69") Certification: ROHS Specifications: Type: Electric Box Dimensions: 3"H x 4"W x 5"L WT: 0.2 lbs UPC: 5060114799523 Quick Guide (pdf)Brochure (pdf)

Read more less

Alternator 250 AMP Kit 12V 4" Dual Foot Saddle Dual Vee Pulley Regulator & Temp SensorKit Includes: XT-DF4-250-DV Alternator, MC-618 Regulator, Temperature Sensors & Mounting HardwareXT Series Alternator: 250A, 12V, Saddle Mount (Dual Foot), 4in, Deep Dual Vee Pulley, Case Ground4" J-180-Style Mounting;  Typical for Caterpillar, Cummins, Detroit Diesel & John Deere EnginesReplaces: AT-DF4-MC-200-KIT, AT-DF4-200-DV-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 250A Voltage: 12v Box Dimensions: 10"H x 11"W x 14"L WT: 20.45 lbs UPC: 676205502801 Brochure (pdf)

Read more less

ConnectPro® Charging/Trolling Receptable, Plug & 6-Guage AdapterThe ConnectPro® system features locking plug and receptacle and spring clamping connection, which provide a secure electrical contact.Receptacle is universal design for 2-or-3 wire configuration, 12, 24, 12//24, 24//36 or 36 volt systems. Features: Watertight sealing cap Corrosion resistant, plated brass electrical components with drain holes in receptacle to keep water away from electrical components Standard 1-1/8 diameter mounting hole and accepts up to 8 gauge wire Includes mounting plate Plug has O-ring seal for waterproof connections Weather resitant plug cover Accepts 16 to 8 gauge wire WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 3"H x 5"W x 9"L WT: 0.42 lbs UPC: 093344305313 Brochure (pdf)

Read more less

Heavy Duty Lugs - 1 Gauge Wire - 5/16" Post - 25-PackCable Gauge: 1Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Heat Shrink: No Gauge: 1 AWG Type: Lugs Post Size: 5/16" Package Qty: 25 Box Dimensions: 2"H x 3"W x 4"L WT: 0.9 lbs UPC: 091887245042 Quick Guide (pdf)

Read more less

Heavy Duty Lugs - 4 Gauge Wire - 5/16" Post - 2-PackCable Gauge: 4Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 4 AWG Type: Lugs Post Size: 5/16" Package Qty: 2 Heat Shrink: No Box Dimensions: 1"H x 2"W x 4"L WT: 0.04 lbs UPC: 091887253061 Quick Guide (pdf)

Read more less

20 Terminal Busbar - 150 AmpDesigned for larger wiring systems, this 20-terminal busbar handles up to 150 amps. It allows you to centralize multiple connections and simplifies complex circuit layouts in marine or industrial systems.This 20-terminal busbar is ideal for applications where space and organization are crucial, providing a clean and efficient way to manage numerous circuits.Built from corrosion-resistant materials, this busbar provides long-lasting performance even in harsh environments, making it a dependable choice for demanding power distribution needs.Specifications: Current: Rated up to 150 Amp Stud Size: 1/4" Stainless Steel Mounting Holes: 0.21 Mounting Screw Size: #10, 1/4" Distance Between Mounting Holes: 8.25" Quick Guide (pdf)Brochure (pdf)

Read more less

6008 M-Series Battery Switch 3 Position - RedSwitches a single battery to a single load group.Features: Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Specifications: Switch Type: Selector 3 Position Color: Red Battery Combine: No Switch Positions: 3 Maximum Voltage: 32V DC

Read more less

DC 12V Socket PanelFeatures: 2 x 12 Volt sockets 15 Ampere maximum per socket Specifications: Height: 4.75" (120.65mm) Width: 4.88" (123.95mm) Depth:1.50" (38.1mm) Weight: 0.67lb (0.3kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AC/DC: DC Box Dimensions: 6"H x 7"W x 9"L WT: 0.65 lbs UPC: 632085014728 Owner's Manual (pdf)

Read more less

NTX-1000-12 Pure Sine Wave Inverter - 1000WThe NTX Series Pure Sine Wave Inverters are FCC certified to ensure no electrical interference when operating near sensitive equipment. This series has a single variable speed temperature and load-controlled fan for quiet operation. Features: Pure Sine Waveform of AC output voltage High efficiency Compact size and low weight Very low idle current  Easily start high surge loads with Samlex HypersurgeTM technology LCD Remote Control Model NTX-RC included Low noise load and temperature controlled variable speed fan Wide input voltage range WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

NTX-2000-12 Pure Sine Wave Inverter - 2000WThe NTX Series Pure Sine Wave Inverters are FCC certified to ensure no electrical interference when operating near sensitive equipment. This series has a single variable speed temperature and load-controlled fan for quiet operation. Features: Pure Sine Waveform of AC output voltage High efficiency Compact size and low weight Very low idle current Easily start high surge loads with Samlex HypersurgeTM technology LCD Remote Control Model NTX-RC included Low noise load and temperature controlled variable speed fan Wide input voltage range WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

100W Fully Isolated DC-DC Converter - 8A - 30-60V Input - 12.5V OutputIDC-100 series is a complete line of high efficiency 100 Watt isolated DC-DC converters suitable for applications requiring galvanic isolation between the input and the output. IDC-100C-12 isolated DC-DC converter provides a highly regulated output DC voltage of 12.5 Volts for an input DC voltage range of 30-60 Volts and rated output current of 8 Amps (at 60 Volts input). Features of this isolated DC-DC converter include compact housing, fold-back current limiting and protection against short circuit, overheating, overvoltage and reverse polarity connection. The unit comes with 1/4” push-on flat blade “quick disconnect” connectors. IDC-100C-12 isolated DC-DC converter is EMI/EMC compliant and conforms to European standards EN50081-1 (for EMI) and EN50082-1 (for EMC).Features: Fully Isolated Short Circuit Protected Current Limited 2 Year Warranty CE Approved Specifications: Input: 30-60 VDC Output: 12.5 VDC Amps: 8 Amps Weight: 1.2 (lbs) Weight: 0.54 (kg) Dimensions: 6 x 3.5 x 1.9 (in) Dimensions: 15.2 x 8.9 x 4.8 (cm) Safety: CE Warranty: 2 Year Limited Applications: Earth moving equipment Heavy trucks Buses Marine vehicles CB radios 12 Volt lighting systems AM/FM sound systems WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

Nest Waterproof Wireless Charger 3-Coil - 15W - 12/24VStore. Charge. Connect, now with 15W 3-coil technology. The pioneering three-coil Nest charger is designed to revolutionize your charging experience. Nest is perfect for integration into consoles, seating, cabinetry, and more! Simply slide your phone into the pocket and instantly start wirelessly charging. The super grippy mat stops your phone from sliding around inside. The front lip with an easy-access thumb bevel acts as a safety barrier, making sure your phone stays in the Nest!This updated version of Nest has a 3-coil charging system. This is a game-changer for outdoor waterproof charging, with three overlapping charging coils that maximize performance, ensuring reliable charging from various phone placements.The intelligent electronics ensure optimal charging by selecting the best coil based on the phone's location. The built-in heat management system also adjusts charging speed based on ambient and phone temperature. This charger is tailored for those seeking uninterrupted charging during outdoor adventures, offering a reliable and efficient solution for powering devices on the go.Intelligent charging:Even when at sea or driving over rough terrain, the intelligent charging features are designed to mirror the movement of your phone, to ensure a constant charge, no matter the adventure or the placement of the phone on the charger.Three-coil system:With a three-coil system that overlaps, there is NO DEAD SPACE, resulting in the most efficient & most amount of power regardless of the phone's position.Hot climates:No problem. With a larger cavity the electronics are designed for thermal management by efficiently dissipating heat, this charger will perform better than other chargers at 30°C (86°F). It will also monitor your phone's heat, adjusting the power output to ensure it does not overheat, helping prolong the health of your phone!LED light system:The LED top light shows that power is being delivered to the charger. Additionally, the LED on the base acts as a rear installation test light, to check your charger is receiving power during the installation process.Red light shows: Charger is in standby mode.White light shows: Phone is charging.Simple InstallOne easy cut into your chosen mounting location,4 screws supplied for fixing, and a front fascia to leave the finished result clean and uncluttered – you're now ready to Store. Charge. Connect!Rounded corners and tapered front design eliminate all snagging risks, making it possible to install in high-traffic areas of the boat where phone charging/storage until now has been impossible.Wash DownWorried about getting water inside? No problem! Nest automatically drains either out of the front or through the self-drill drains out of the rear of the housing with the option to use a push-fit drain tube to route water away. Dual Functionally Featuring an intelligent Foreign Object Detection, Nest is perfect for storing your other personal items such as wallets and keys as the charger will only begin to charge when a phone is placed on the mat – nothing else!Features: 12/24V 15W Charger IPX6 Waterproof Qi-compatible Input Voltage Range: 10-30V DC (12/24V system) Three overlapping charging coils maximize performance. Reverse polarity protection No alignment is needed, throw your phone into the charger and your phone will always charge! Uninterrupted charging during outdoor adventures Rear installation light, for testing power & correct wiring. LED light acts as a quick visual guide to show the phone is charging. Simple one-cut installation Foreign object detection 5-year warranty Our Testing EthosOur testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, we design our products to be able to thrive in the harshest of outdoor environments.Before any product is released, it must pass through our rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.Our commitment to quality has earned us the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about our testing program and certifications, please feel free to reach out to us. Owner's Manual (pdf)Brochure (pdf)

Read more less

Black 1 AWG Battery Cable - Sold By The Foot Pacer's 1 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Oftentimes, marine applications are in enclosed areas with sharp turns. Installation can become difficult. Pacer simplified this process by developing flexible yet tough marine cables. This 1 AWG marine battery cable is built to handle the harshest conditions. All our marine cable is made from Type III tinned copper. The copper resists corrosion and ensures the longevity of the cable.  It is then insulated with a durable and pliable PVC jacket. These things together make it the highest quality marine battery cable available. Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold by the Foot Specifications: Color: Black Gauge: 1 AWG Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 12"L WT: 0.38 lbs Brochure (pdf)

Read more less

14/2 AWG Safety Duplex Cable - Flat Cable - Red/Yellow - Sold By The FootDuplex Boat Cable is used in low voltage AC applications as well as DC circuits.  Pacer manufactures 14 AWG Duplex boat cable in house in the USA for the best quality.  First, the cable is built from finely stranded, Type III tinned copper conductors.  These conductors allow for flexibility and help to prevent corrosion. The PVC jacket helps 14 AWG Duplex Boat Cable to be flexible while preventing moisture from accumulating.  How does it do that?  During the extrusion process, the spaces between wires are filled.  This leaves no space for moisture or air to accumulate.  After that, a talcum powder coating is given to the interior wires. This coating is used to allow the outer jacket to be easily removed.  Just another reason 14 AWG Duplex boat cable is perfect for marine use. Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.Features: Extruded exterior cable insulation with no gaps Highly flexible color coded wire insulation Stranded, tinned copper conductors Annealed Finely Stranded Tinned Copper ASTM B172 Class K Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 2 Type of Cable - Duplex  *Sold By the Foot Specifications: Color: Red/Yellow Gauge: 14/2 AWG Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 0.07 lbs Brochure (pdf)

Read more less

ProLite Charger 4 Bank - 12V - 40ABuilt for reliability, efficiency, and durability in the harshest marine conditions. With 4 independent DC outputs, it safely and efficiently charges multiple battery banks at once, making it the perfect choice for today’s demanding boats and yachts.Features: High Performance - 40A charging power across 4 DC outputs. Prewired Convenience - Equipped with 6’ tinned marine-grade cables and integrated fusing for fast, safe installation. Smart Connectivity - Bluetooth-enabled with the Dolphin Connect App for real-time monitoring and control. Rugged Marine Design - IP55-rated fanless construction ensures quiet, dust-proof, and splash-resistant operation—perfect for harsh marine environments. Versatile & Efficient - Compatible with AGM, Gel, Lithium, and Lead-Acid batteries. Compact & Lightweight - Space-saving design without compromising durability or power. Brochure (pdf)

Read more less

3-Position Nylon Ignition Switch - OFF/Ignition/StartImpact and corrosion-resistant switch fits standard 7/8" diameter hole and includes PVC boot for added weather protection.Features: Coded tumbler lock for added secutiry, includes two keys Nominal voltage is 6-36V DC Rated for 15A ignition, 5A start #8-32 screw terminals Fits panels upt to 7/8" thick Same as Cole Hersee part number M-850 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Lever-Operated Master Disconnect - ON/OFFThis single pole, single throw switch turns one circuit on and off.Features: Nominal Voltage is 6-36V DC with 175A continuous and 800A intermittent ratings Has 3/8" brass terminal studs Includes face plate which indicates position of the M284 switch 3/4" mounting hole, up to 5/16" panel thickness Compares to Cole Hersee part number M-284-09-BP WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Receptacle & BracketSpring loaded flip lid cover and 2018BR receptacle, pre assembledWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Receptacles Box Dimensions: 2"H x 3"W x 6"L WT: 0.2 lbs UPC: 093344306037

Read more less

White Triplex Cable - 12/3 - White, Black, Green - Sold by the FootFeatures: Ancor round triplex cable features white, green, and black Marine Grade primary conductors (correctly color-coded to ABYC standards) in a white common jacket that is made for easy removal while providing the best abrasion resistance available These cables exceed UL 1426 standards and are made from the highest quality ultra-flexible (Type 3/Class K) tinned copper stranding that provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing Ancor's proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline, and ultraviolet radiation. Exclusive insulation is rated at 600 volts, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Features three Marine Grade™ primary conductors (white, black, and green) in a white common jacket. Specifications: Color: Black/Green/White Gauge: 12/3 AWG Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 12"L WT: 0.1 lbs

Read more less

MEGA Fuse 40A/80V (Package of 5 Pieces)Victron Energy supplies a range of fuse holders and fuses to suit a wide range of installations, and the MEGA fuses are frequently used in Victron Energy DC distribution systems. This particular pack of ceramic Victron MEGA fuses contains FIVE 40 AMP fuses.Features:For 80V productsSpecifications: Max Current Rating: 40 AMP Max Voltage Rating: 80V Please contact your dealer for any returns, repairs or support issues related to this product.

Read more less

GX Touch 50 Flush Mount Display 94 x 136 x 12mmThe GX Touch is optimized to more than meet the standards of installer professionals. The screen is simply bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the Color Control GX).  It can also be mounted flush or even embossed with the unlaying surface and connected through just one cable, taking away the hassle of having to bring many wires to a dashboard.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Round Power Socket - 12VStamped brass/injection molded nylon and ABS. 12 volts, 16 amps. Includes screws. Sea-Dog Line is a 3rd generation family company with a history of satisfied customers stretching back to the company's start in 1933. The company is the recipient of multiple industry awards for quality and efficiency. Features: Stamped brass/injection molded nylon and ABS 12V 16 Amps Includes screws WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Red 18 AWG UL Marine Wire - 35'Pacer's marine wire is designed to handle the harshest marine environments. It is manufactured to meet and exceed the most stringent specifications. This 18 AWG marine wire is constructed in-house in Sarasota, FL, USA, to achieve the highest level of quality. Built from Type III class K tinned copper, Pacer marine wire offers excellent corrosion resistance and flexibility. After the copper is tinned, it is then insulated with a durable and flexible proprietary PVC jacket. The jacket makes this 18 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture. All marine wire needs to be durable enough to handle the toughest conditions, and Pacer marine wire does just that. Pacer's marine wire meets or exceeds the requirements and standards of UL, ABYC, and NMMA.Features: Stranded, tinned copper conductors Highly flexible color-coded insulation Compliances: AWM 1015/1230  CSA: TEW Temperature Rating: 105 °C Dry, 60 °C Wet Characteristics: Conductor: Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation: -20 °C to 105 °C flexible, color-coded PVC Voltage Rating: 600-V Resistant to: Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture Applications: Point to point wiring Internal wiring of panels and motors Specifications: AWG: 18 Length: 35 ft. Color: Red Cond. Stranding: 16/0.0100 Nom. Ins. Thickness: 0.030 Nom. O.D.: 0.114 Nom. Circular Mils: 1600 Approximate LB/M: 10.3 Specifications: Color: Red Gauge: 18 AWG Length (Feet): 35' Box Dimensions: 2"H x 4"W x 4"L WT: 0.5 lbs UPC: 840248215725 Brochure (pdf)

Read more less

M-Series 300A Dual Circuit Battery Switch with Combine Battery SwitchSealed Against Dust & Water Intrusion - To ensure reliable circuit protection for the life of the electrical system installation.Ignition Protected - Safe for installation in closed compartments with potential explosive gases.Serrated Flange Lock Nuts - Improves resistance to cable terminal loosening in high-vibration environments.Flexible Mounting Options - Allow for multiple mounting configurations and a variety of installation types.Harsh Environment Design - With stainless steel hardware, serrated flange nuts, and high-temperature materials.Specifications: Maximum Voltage (Single Circuit): 48 Vdc Maximum Voltage (Selector / Dual Circuit): 32 Vdc Stud Size And Thread: 3/8”-16 Terminal Stud Torque: 120 in-lbs (13.6 N-m) Ring Terminal Size Acceptance: 3/8” (M10) Mounting Holes: #10 Screw Live Switching Rating: 25 Amps Ignition Protection Rating: SAE J1171 / ISO 8846 Bulkhead / Panel - Mounting Hole Size: 2-5/8" / 2-5/16" Cable Size to Meet Rating: 4/0 AWG Quick Guide (pdf)

Read more less

Aura Magnetic Wireless Charger - 10W - 12/24VIntroducing Scanstrut's Aura 10W. Designed to withstand the toughest conditions, this device not only wirelessly charges your phone but also securely holds it in place.Thanks to our Mag technology, an Apple iPhone will effortlessly magnetically lock into an optimal charging location. Plus, the front spring-loaded locking grip ensures the phone remains in place even during rough rides, keeping it fully always charged and within reach.InstallationDesigned to be installed below marine foam products, leaving a clean, integrated finish.PowerScanstrut's upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps.Subjected to our harshest environmental, vibration, impact, and on-water testing programs.This is combined with Scanstrut's world-renowned expertise in waterproofing technologies, UV stabilization techniques, and premium-grade materials to ensure Aura is the best and only choice to make when it comes to mounting and wirelessly charging your phone outdoors. Specifications: Type: Chargers Box Dimensions: 4"H x 5"W x 6"L WT: 0.5 lbs UPC: 5060114799103

Read more less

C-Series Flat Rocker Circuit Breaker - Single Pole - 10AFeatures: Rocker actuator is flush in the "ON" position, eliminating the risk of accidential switching Color actuator indicates "OFF" position Provides overcurrent protection for inverters, bow thrusters, and windlasses Combines switching and circuit protection into a single device "Trip Free" - cannot be held closed after trip Ignition protectedsafe for installation aboard gasoline powered boats Specifications: Amperage: 10A AC / 10A DC Actuator Style: Flat Rocker Poles: 1 Maximum Voltage: 240V AC / 48V DC Circuit Breaker Type: Magnetic Hydraulic - trip free Terminal Stud Torque: 35 in-lb (3.95 Nm) Interrupt Capacity: 3000A @ 120V AC / 3500A @ 240V AC / 5000A @ 32V DC Minimum Operating Temperature: -40° C Maximum Operating Temperature: 85° C Mounting Screw: #6-32 Stainless Steel Mounting Screw Torque: 6 in-lb (0.68 Nm) Switching Cycles: 10000 Terminal Stud: 1/4-20 Tin-Plated Brass Weight: 0.38lb (0.17 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 10a Box Dimensions: 1"H x 1"W x 12"L WT: 1 lbs UPC: 632085075415

Read more less