Stainless Steel C-Clamp with Neoprene Cushion - 2-1/2" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 2-1/2” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 6"W x 6"L WT: 1 lbs UPC: 840248216340 Brochure (pdf)

Read more less

Screw Down Cable Tie Mount - #10 Screw Mount Method - Natural Color - 100 PackScrew-down mounts allow for quick installation of cable ties to multiple surfaces. They are simple to install and have been designed for longevity. All users need to do is simply place a screw in the central hole and screw it to the surface of your choice. It is that easy. White screw-down mounts are for indoor use whereas black cable tie mounts are used for either indoor or outdoor applications. Features: Screw-fastened nylon cradles Low profile Excellent stability and rigidity Specifications: Color: Natural nylon color Mount Method: #10 Screw Package Size: 100 pack Use with Cable Tie: M, I, S, LH Specifications: Type: Cable Ties Box Dimensions: 1"H x 3"W x 6"L WT: 0.1 lbs UPC: 840248216661

Read more less

Screw Down Cable Tie Mount - #8 Screw Mount Method - Natural Color - 100 PackScrew-down mounts allow for quick installation of cable ties to multiple surfaces. They are simple to install and have been designed for longevity. All users need to do is simply place a screw in the central hole and screw it to the surface of your choice. It is that easy. White screw-down mounts are for indoor use whereas black cable tie mounts are used for either indoor or outdoor applications. Features: Screw-fastened nylon cradles Low profile Excellent stability and rigidity Specifications: Color: Natural nylon color Mount Method: #8 Screw Package Size: 100 pack Use with Cable Tie: M, I, S Specifications: Type: Cable Ties Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs UPC: 840248216647 Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 1-3/4" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 1-3/4” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 4"W x 4"L WT: 0.5 lbs UPC: 840248216326 Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 3-1/2" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 3-1/2” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Brochure (pdf)

Read more less

Battery Cable Heat Shrink Tubing - 1/8" x 12" - Black (10-Pieces)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 1"W x 12"L WT: 0.06 lbs UPC: 840248214568 Brochure (pdf)

Read more less

Deutsch Stamped & Formed Contacts for 14-18 AWG Wire – Pin Cavity Style - 100 PackDeutsch machined contacts are for use with almost the entire line of Deutsch connectors and are ideal for marine conditions. They are known for their reliability and durability which are just a few of the reasons that the professionals turn to these contacts for repeatable and reliable results. Another benefit of these contacts is the fact that they are simple to use and require little time for installation.Deutsch stamped and formed contacts are for use with almost the entire line of Deutsch connectors and are ideal for marine conditions. They are known for their durability as well as their longevity. These are just a few of the reasons that professionals turn to these contacts for repeatable and reliable results. Features: Easy to install Field serviceable Applications: Cable to cable applications Enclosed connectors offer field proven reliability and rugged quality Characteristics: Cable to cable applications Enclosed connectors offer field proven reliability and rugged quality Compliances: Ingress Protection (IP) Level: IP68 and IP6K9K RoHS UL Recognized Specifications: Package Size: 100 Wire Size: 16-14 AWG Operating Temperature: -55°C to 125°C Current Rating: 13A

Read more less

DTP Deutsch Socket for 10 AWG Wire - Size 12 Contact (25 Pack)Deutsch machined contacts are for use with almost the entire line of Deutsch connectors and are ideal for marine conditions. They are known for their reliability and durability which are just a few of the reasons that the professionals turn to these contacts for repeatable and reliable results. Another benefit of these contacts is the fact that they are simple to use and require little time for installation.Features: Easy to install Field serviceable Applications: Cable-to-cable applications Enclosed connectors offer field-proven reliability and rugged quality Characteristics:Hand-insertable contactsCompliances: Ingress Protection (IP) Level: IP68 and IP6K9K RoHS UL Recognized Specifications: Cavity Style: Plug (socket) Connector Type: DTP Wire Size: 10 AWG Current Rating: 25 Package Size: 25 Contact Size: 12 Operating Temperature: -55°C to 125°C Brochure (pdf)

Read more less

DTP Deutsch Pin for 14-12 AWG Wire - Size 12 Contact (10 Pack)Deutsch machined contacts are for use with almost the entire line of Deutsch connectors and are ideal for marine conditions. They are known for their reliability and durability which are just a few of the reasons that the professionals turn to these contacts for repeatable and reliable results. Another benefit of these contacts is the fact that they are simple to use and require little time for installation.Features: Easy to install Field serviceable Applications: Cable-to-cable applications Enclosed connectors offer field-proven reliability and rugged quality Characteristics:Hand-insertable contactsCompliances: Ingress Protection (IP) Level: IP68 and IP6K9K RoHS UL Recognized  Specifications: Cavity Style: Receptacle (pin) Connector Type: DTP Wire Size: 14-12 AWG Current Rating: 25 Package Size: 10 Contact Size: 12 Operating Temperature: -55°C to 125°C Brochure (pdf)

Read more less

DTP Deutsch Socket for 10 AWG Wire - Size 12 Contact (10 Pack)Deutsch machined contacts are for use with almost the entire line of Deutsch connectors and are ideal for marine conditions. They are known for their reliability and durability which are just a few of the reasons that the professionals turn to these contacts for repeatable and reliable results. Another benefit of these contacts is the fact that they are simple to use and require little time for installation.Features: Easy to install Field serviceable Applications: Cable-to-cable applications Enclosed connectors offer field-proven reliability and rugged quality Characteristics:Hand-insertable contactsCompliances: Ingress Protection (IP) Level: IP68 and IP6K9K RoHS UL Recognized Specifications: Cavity Style: Plug (socket) Connector Type: DTP Wire Size: 10 AWG Current Rating: 25 Package Size: 10 Contact Size: 12 Operating Temperature: -55°C to 125°C Brochure (pdf)

Read more less

Battery Cable Heat Shrink Tubing - 1" x 3" - Black/Red (2-Pieces Combo Pack)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 4"L WT: 0.05 lbs UPC: 840248214629 Brochure (pdf)

Read more less

Battery Cable Heat Shrink Tubing - 3/16" x 12" - Red (10-Pieces)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 1"W x 12"L WT: 0.08 lbs UPC: 840248214667 Brochure (pdf)

Read more less

Nylon C-Clamps - 3/8" - Natural Color - 25 PackNylon cable clamps are used to mount cables, harnesses, or hoses. They are known for their ease of installation as well as their ability to handle tough conditions. Nylon cable clamps can be used indoors (natural or black) or outdoors (black only). Available in a wide range of sizes, cable clamps are a simple solution that can benefit anyone working with wires and cables. Have a question about nylon cable clamps or any other Pacer product? Contact a Pacer expert today with any questions that you have and let them help.Features: Nylon material 1/2" width for strength Mounts with a #10 screw Applications:BCCH (Battery Cable Clamp Hulls) is an economical, fast, and efficient mounting system for a wide variety of materials, including cables, hoses, and harnessesSpecifications: Diameter When Closed: 3/8” Package Size: 25 Cable Clamp Color: Natural Specifications: Type: Misc Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 840248216098 Brochure (pdf)

Read more less

Nylon C-Clamps - 5/16" - Natural Color - 25 PackNylon cable clamps are used to mount cables, harnesses, or hoses. They are known for their ease of installation as well as their ability to handle tough conditions. Nylon cable clamps can be used indoors (natural or black) or outdoors (black only). Available in a wide range of sizes, cable clamps are a simple solution that can benefit anyone working with wires and cables. Have a question about nylon cable clamps or any other Pacer product? Contact a Pacer expert today with any questions that you have and let them help.Features: Nylon material 1/2" width for strength Mounts with a #10 screw Applications:BCCH (Battery Cable Clamp Hulls) is an economical, fast, and efficient mounting system for a wide variety of materials, including cables, hoses, and harnessesSpecifications: Diameter When Closed: 5/16” Package Size: 25 Cable Clamp Color: Natural Specifications: Type: Misc Box Dimensions: 1"H x 2"W x 3"L WT: 0.05 lbs UPC: 840248216081 Brochure (pdf)

Read more less

Nylon C-Clamps - 3/4" - Natural Color - 25 PackNylon cable clamps are used to mount cables, harnesses, or hoses. They are known for their ease of installation as well as their ability to handle tough conditions. Nylon cable clamps can be used indoors (natural or black) or outdoors (black only). Available in a wide range of sizes, cable clamps are a simple solution that can benefit anyone working with wires and cables. Have a question about nylon cable clamps or any other Pacer product? Contact a Pacer expert today with any questions that you have and let them help.Features: Nylon material 1/2" width for strength Mounts with a #10 screw Applications:BCCH (Battery Cable Clamp Hulls) is an economical, fast, and efficient mounting system for a wide variety of materials, including cables, hoses, and harnessesSpecifications: Diameter When Closed: 3/4” Package Size: 25 Cable Clamp Color: Natural Specifications: Type: Misc Box Dimensions: 2"H x 5"W x 6"L WT: 0.25 lbs UPC: 840248216128 Brochure (pdf)

Read more less

Nylon C-Clamps - 1/2" - Natural Color - 25 PackNylon cable clamps are used to mount cables, harnesses, or hoses. They are known for their ease of installation as well as their ability to handle tough conditions. Nylon cable clamps can be used indoors (natural or black) or outdoors (black only). Available in a wide range of sizes, cable clamps are a simple solution that can benefit anyone working with wires and cables. Have a question about nylon cable clamps or any other Pacer product? Contact a Pacer expert today with any questions that you have and let them help.Features: Nylon material 1/2" width for strength Mounts with a #10 screw Applications:BCCH (Battery Cable Clamp Hulls) is an economical, fast, and efficient mounting system for a wide variety of materials, including cables, hoses, and harnessesSpecifications: Diameter When Closed: 1/2” Package Size: 25 Cable Clamp Color: Natural Specifications: Type: Misc Box Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbs UPC: 840248216104 Brochure (pdf)

Read more less

Nylon C-Clamps - 1" - Natural Color - 25 PackNylon cable clamps are used to mount cables, harnesses, or hoses. They are known for their ease of installation as well as their ability to handle tough conditions. Nylon cable clamps can be used indoors (natural or black) or outdoors (black only). Available in a wide range of sizes, cable clamps are a simple solution that can benefit anyone working with wires and cables. Have a question about nylon cable clamps or any other Pacer product? Contact a Pacer expert today with any questions that you have and let them help.Features: Nylon material 1/2" width for strength Mounts with a #10 screw Applications:BCCH (Battery Cable Clamp Hulls) is an economical, fast, and efficient mounting system for a wide variety of materials, including cables, hoses, and harnessesSpecifications: Diameter When Closed: 1” Package Size: 25 Cable Clamp Color: Natural Specifications: Type: Misc Box Dimensions: 2"H x 3"W x 6"L WT: 0.1 lbs UPC: 840248216135 Brochure (pdf)

Read more less

Nylon C-Clamps - 3/16" - Natural Color - 25 PackNylon cable clamps are used to mount cables, harnesses, or hoses. They are known for their ease of installation as well as their ability to handle tough conditions. Nylon cable clamps can be used indoors (natural or black) or outdoors (black only). Available in a wide range of sizes, cable clamps are a simple solution that can benefit anyone working with wires and cables. Have a question about nylon cable clamps or any other Pacer product? Contact a Pacer expert today with any questions that you have and let them help.Features: Nylon material 1/2" width for strength Mounts with a #10 screw Applications:BCCH (Battery Cable Clamp Hulls) is an economical, fast, and efficient mounting system for a wide variety of materials, including cables, hoses, and harnessesSpecifications: Diameter When Closed: 3/16” Package Size: 25 Cable Clamp Color: Natural Specifications: Type: Misc Box Dimensions: 1"H x 2"W x 3"L WT: 0.05 lbs UPC: 840248216067 Brochure (pdf)

Read more less

Nylon C-Clamps - 3/8" - Natural Color - 100 PackNylon cable clamps are used to mount cables, harnesses, or hoses. They are known for their ease of installation as well as their ability to handle tough conditions. Nylon cable clamps can be used indoors (natural or black) or outdoors (black only). Available in a wide range of sizes, cable clamps are a simple solution that can benefit anyone working with wires and cables. Have a question about nylon cable clamps or any other Pacer product? Contact a Pacer expert today with any questions that you have and let them help.Features: Nylon material 1/2" width for strength Mounts with a #10 screw Applications:BCCH (Battery Cable Clamp Hulls) is an economical, fast, and efficient mounting system for a wide variety of materials, including cables, hoses, and harnessesSpecifications: Diameter When Closed: 3/8” Package Size: 100 Cable Clamp Color: Natural Specifications: Type: Misc Box Dimensions: 3"H x 5"W x 6"L WT: 0.25 lbs UPC: 840248216043 Brochure (pdf)

Read more less

Nylon C-Clamps - 1-1/2" - Natural Color - 25 PackNylon cable clamps are used to mount cables, harnesses, or hoses. They are known for their ease of installation as well as their ability to handle tough conditions. Nylon cable clamps can be used indoors (natural or black) or outdoors (black only). Available in a wide range of sizes, cable clamps are a simple solution that can benefit anyone working with wires and cables. Have a question about nylon cable clamps or any other Pacer product? Contact a Pacer expert today with any questions that you have and let them help.Features: Nylon material 1/2" width for strength Mounts with a #10 screw Applications:BCCH (Battery Cable Clamp Hulls) is an economical, fast, and efficient mounting system for a wide variety of materials, including cables, hoses, and harnessesSpecifications: Diameter When Closed: 1-1/2” Package Size: 25 Cable Clamp Color: Natural Specifications: Type: Misc Box Dimensions: 2"H x 4"W x 6"L WT: 0.2 lbs UPC: 840248216159 Brochure (pdf)

Read more less

Nylon C-Clamps - 1-1/4" - Natural Color - 25 PackNylon cable clamps are used to mount cables, harnesses, or hoses. They are known for their ease of installation as well as their ability to handle tough conditions. Nylon cable clamps can be used indoors (natural or black) or outdoors (black only). Available in a wide range of sizes, cable clamps are a simple solution that can benefit anyone working with wires and cables. Have a question about nylon cable clamps or any other Pacer product? Contact a Pacer expert today with any questions that you have and let them help.Features: Nylon material 1/2" width for strength Mounts with a #10 screw Applications:BCCH (Battery Cable Clamp Hulls) is an economical, fast, and efficient mounting system for a wide variety of materials, including cables, hoses, and harnessesSpecifications: Diameter When Closed: 1-1/4” Package Size: 25 Cable Clamp Color: Natural Specifications: Type: Misc Box Dimensions: 2"H x 3"W x 6"L WT: 0.25 lbs UPC: 840248216142 Brochure (pdf)

Read more less

Nylon C-Clamps - 1/8" - Natural Color - 25 PackNylon cable clamps are used to mount cables, harnesses, or hoses. They are known for their ease of installation as well as their ability to handle tough conditions. Nylon cable clamps can be used indoors (natural or black) or outdoors (black only). Available in a wide range of sizes, cable clamps are a simple solution that can benefit anyone working with wires and cables. Have a question about nylon cable clamps or any other Pacer product? Contact a Pacer expert today with any questions that you have and let them help.Features: Nylon material 1/2" width for strength Mounts with a #10 screw Applications:BCCH (Battery Cable Clamp Hulls) is an economical, fast, and efficient mounting system for a wide variety of materials, including cables, hoses, and harnessesSpecifications: Diameter When Closed: 1/8” Package Size: 25 Cable Clamp Color: Natural Specifications: Type: Misc Box Dimensions: 1"H x 2"W x 3"L WT: 0.05 lbs UPC: 840248216050 Brochure (pdf)

Read more less

Seamless Butt Splice - 4 AWG - Non-Insulated - 2 PackButt splices are a simple way to repair or create a long-term electrical connection. They are easy to use and built for longevity. Seamless tinned butt splices are available in non-insulated only. How do you use seamless tinned butt splices? The first thing to do is cut and strip your wires to the proper length. Now, if you look inside the butt splice you will see there is an indentation. Insert your wire into the butt splice making sure it butts up to the indentation. Next, simply crimp using the proper tool. This guarantees the correct amount of pressure ensuring a solid connection. Now, simply repeat the process on the other side and you're done. Pacer would strongly recommend performing the tug test. This test ensures that the connection is solid. To do the test simply grab both wires coming out of the butt splice and gently tug two or three times.When using seamless tinned butt splices, make sure you have properly stripped your wires to the correct length. When you look inside of the butt splice, you will see an indentation. Make sure your conductors butt up against that. Insert the wire making sure the insulation touches the butt splice. This reduces the risk of a weaker connection. Now, the splice is crimped with the proper tool. This crimp creates a solid connection. Next, repeat the process on the other side and perform the tug test to make sure that the wires don't pull out. This process creates a durable, lasting connection. Butt splices are used for their rapid installation and durability. Other methods of connection just don't offer the same level of protection.Features: Tin Plated Seamless Specifications: Package Size: 2 Wire AWG: 4 Length: 1.155” I.D. (in.): 0.277” O.D. (in.): 0.457” Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Specifications: Gauge: 4 AWG Heat Shrink: No Box Dimensions: 1"H x 1"W x 4"L WT: 0.05 lbs UPC: 840248207508 Brochure (pdf)

Read more less

Seamless Butt Splice - 8 AWG - Non-Insulated - 10 PackButt splices are a simple way to repair or create a long-term electrical connection. They are easy to use and built for longevity. Seamless tinned butt splices are available in non-insulated only. How do you use seamless tinned butt splices? The first thing to do is cut and strip your wires to the proper length. Now, if you look inside the butt splice you will see there is an indentation. Insert your wire into the butt splice making sure it butts up to the indentation. Next, simply crimp using the proper tool. This guarantees the correct amount of pressure ensuring a solid connection. Now, simply repeat the process on the other side and you're done. Pacer would strongly recommend performing the tug test. This test ensures that the connection is solid. To do the test simply grab both wires coming out of the butt splice and gently tug two or three times.When using seamless tinned butt splices, make sure you have properly stripped your wires to the correct length. When you look inside of the butt splice, you will see an indentation. Make sure your conductors butt up against that. Insert the wire making sure the insulation touches the butt splice. This reduces the risk of a weaker connection. Now, the splice is crimped with the proper tool. This crimp creates a solid connection. Next, repeat the process on the other side and perform the tug test to make sure that the wires don't pull out. This process creates a durable, lasting connection. Butt splices are used for their rapid installation and durability. Other methods of connection just don't offer the same level of protection.Features: Tin Plated Seamless Specifications: Package Size: 10 Wire AWG: 8 Length: 0.864” I.D. (in.): 0.165” O.D. (in.): 0.295” Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Specifications: Gauge: 8 AWG Heat Shrink: No Box Dimensions: 0"H x 5"W x 9"L WT: 0.1 lbs UPC: 840248206013 Brochure (pdf)

Read more less

Seamless Butt Splice - 2 AWG - Non-Insulated - 2 PackButt splices are a simple way to repair or create a long-term electrical connection. They are easy to use and built for longevity. Seamless tinned butt splices are available in non-insulated only. How do you use seamless tinned butt splices? The first thing to do is cut and strip your wires to the proper length. Now, if you look inside the butt splice you will see there is an indentation. Insert your wire into the butt splice making sure it butts up to the indentation. Next, simply crimp using the proper tool. This guarantees the correct amount of pressure ensuring a solid connection. Now, simply repeat the process on the other side and you're done. Pacer would strongly recommend performing the tug test. This test ensures that the connection is solid. To do the test simply grab both wires coming out of the butt splice and gently tug two or three times.When using seamless tinned butt splices, make sure you have properly stripped your wires to the correct length. When you look inside of the butt splice, you will see an indentation. Make sure your conductors butt up against that. Insert the wire making sure the insulation touches the butt splice. This reduces the risk of a weaker connection. Now, the splice is crimped with the proper tool. This crimp creates a solid connection. Next, repeat the process on the other side and perform the tug test to make sure that the wires don't pull out. This process creates a durable, lasting connection. Butt splices are used for their rapid installation and durability. Other methods of connection just don't offer the same level of protection.Features: Tin Plated Seamless Specifications: Package Size: 2 Wire AWG: 2 Length: 1.280” I.D. (in.): 0.357” O.D. (in.): 0.538” Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Specifications: Gauge: 2 AWG Heat Shrink: No Box Dimensions: 1"H x 2"W x 4"L WT: 0.05 lbs UPC: 840248207515 Brochure (pdf)

Read more less

Seamless Butt Splice - 2/0 AWG - Non-Insulated - 2 PackButt splices are a simple way to repair or create a long-term electrical connection. They are easy to use and built for longevity. Seamless tinned butt splices are available in non-insulated only. How do you use seamless tinned butt splices? The first thing to do is cut and strip your wires to the proper length. Now, if you look inside the butt splice you will see there is an indentation. Insert your wire into the butt splice making sure it butts up to the indentation. Next, simply crimp using the proper tool. This guarantees the correct amount of pressure ensuring a solid connection. Now, simply repeat the process on the other side and you're done. Pacer would strongly recommend performing the tug test. This test ensures that the connection is solid. To do the test simply grab both wires coming out of the butt splice and gently tug two or three times.When using seamless tinned butt splices, make sure you have properly stripped your wires to the correct length. When you look inside of the butt splice, you will see an indentation. Make sure your conductors butt up against that. Insert the wire making sure the insulation touches the butt splice. This reduces the risk of a weaker connection. Now, the splice is crimped with the proper tool. This crimp creates a solid connection. Next, repeat the process on the other side and perform the tug test to make sure that the wires don't pull out. This process creates a durable, lasting connection. Butt splices are used for their rapid installation and durability. Other methods of connection just don't offer the same level of protection.Features: Tin Plated Seamless Specifications: Package Size: 2 Wire AWG: 2/0 Length: 1.440” I.D. (in.): 0.496” O.D. (in.): 0.697” Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Specifications: Gauge: 2/0 AWG Heat Shrink: No Box Dimensions: 1"H x 2"W x 4"L WT: 0.1 lbs UPC: 840248207546 Brochure (pdf)

Read more less

Seamless Butt Splice - 1/0 AWG - Non-Insulated - 2 PackButt splices are a simple way to repair or create a long-term electrical connection. They are easy to use and built for longevity. Seamless tinned butt splices are available in non-insulated only. How do you use seamless tinned butt splices? The first thing to do is cut and strip your wires to the proper length. Now, if you look inside the butt splice you will see there is an indentation. Insert your wire into the butt splice making sure it butts up to the indentation. Next, simply crimp using the proper tool. This guarantees the correct amount of pressure ensuring a solid connection. Now, simply repeat the process on the other side and you're done. Pacer would strongly recommend performing the tug test. This test ensures that the connection is solid. To do the test simply grab both wires coming out of the butt splice and gently tug two or three times.When using seamless tinned butt splices, make sure you have properly stripped your wires to the correct length. When you look inside of the butt splice, you will see an indentation. Make sure your conductors butt up against that. Insert the wire making sure the insulation touches the butt splice. This reduces the risk of a weaker connection. Now, the splice is crimped with the proper tool. This crimp creates a solid connection. Next, repeat the process on the other side and perform the tug test to make sure that the wires don't pull out. This process creates a durable, lasting connection. Butt splices are used for their rapid installation and durability. Other methods of connection just don't offer the same level of protection.Features: Tin Plated Seamless Specifications: Package Size: 2 Wire AWG: 1/0 Length: 1.440” I.D. (in.): 0.439” O.D. (in.): 0.620” Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Specifications: Gauge: 1/0 AWG Heat Shrink: No Box Dimensions: 1"H x 2"W x 4"L WT: 0.1 lbs UPC: 840248207539 Brochure (pdf)

Read more less

Seamless Butt Splice - 6 AWG - Non-Insulated - 10 PackButt splices are a simple way to repair or create a long-term electrical connection. They are easy to use and built for longevity. Seamless tinned butt splices are available in non-insulated only. How do you use seamless tinned butt splices? The first thing to do is cut and strip your wires to the proper length. Now, if you look inside the butt splice you will see there is an indentation. Insert your wire into the butt splice making sure it butts up to the indentation. Next, simply crimp using the proper tool. This guarantees the correct amount of pressure ensuring a solid connection. Now, simply repeat the process on the other side and you're done. Pacer would strongly recommend performing the tug test. This test ensures that the connection is solid. To do the test simply grab both wires coming out of the butt splice and gently tug two or three times.When using seamless tinned butt splices, make sure you have properly stripped your wires to the correct length. When you look inside of the butt splice, you will see an indentation. Make sure your conductors butt up against that. Insert the wire making sure the insulation touches the butt splice. This reduces the risk of a weaker connection. Now, the splice is crimped with the proper tool. This crimp creates a solid connection. Next, repeat the process on the other side and perform the tug test to make sure that the wires don't pull out. This process creates a durable, lasting connection. Butt splices are used for their rapid installation and durability. Other methods of connection just don't offer the same level of protection.Features: Tin Plated Seamless Specifications: Package Size: 10 Wire AWG: 6 Length: 1.045” I.D. (in.): 0.230” O.D. (in.): 0.374” Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Specifications: Gauge: 6 AWG Heat Shrink: No Box Dimensions: 0"H x 5"W x 9"L WT: 0.15 lbs UPC: 840248205993 Brochure (pdf)

Read more less

Class T Fuse Holder with 2 Additional Studs 450-600AProviding high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load. Radiused ends improve cable routing options Class-T: 450-600 Amp WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: Class T Type: Fuse Blocks Box Dimensions: 2"H x 7"W x 8"L WT: 0.95 lbs UPC: 843687006862 Brochure (pdf)

Read more less

16-14 AWG Fully-Insulated Male Disconnect Terminal - Blue - 100 PackCreating a solid connection is important in every part of an electrical system. Being able to disconnect and reconnect makes maintenance that much easier. With Pacer's heat shrink fully insulated disconnect terminals, users get the best of both worlds. Heat shrink terminals protect against the elements in the most challenging of environments. They offer the best moisture protection available. How do they do this? These heat shrink fully insulated disconnect terminals have a built-in heat-activated adhesive liner.This liner provides a rugged, environmentally sealed connection for wires from 22 AWG - 10 AWG. No longer will users need to worry about exposure to water, oil, gas, or other corrosive compounds. These terminals even protect connections from physical abuse and abrasion. Disconnects allow the user to easily separate the connection if needed. This makes removing a piece of equipment or completing field service maintenance a breeze. The insulation color indicates the wire gauge the terminal should be used on. Red insulation is for 22-18 AWG. Blue insulation is for 16-14 AWG. Yellow insulation is for 12-10 AWG. Selecting the correct heat shrink fully insulated disconnect terminal isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Protects terminations from water, condensation, salt spray and corrosion Added vibration protection in rugged environments Provides strain relief Characteristics: Shrink Ratio: Approx. 3:1 at 135 °C Operating Temp: -55 °C - 125 °C Vol. Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: AWG: 16-14 Disc./Bullet Size: 0.250 in. Insulation Color: Blue Package Size: 100 Compliances: UL CSA RoHS Specifications: Gauge: 16-14 AWG Box Dimensions: 2"H x 3"W x 8"L WT: 0.4 lbs UPC: 840248207607 Brochure (pdf)

Read more less

Green 14 AWG Primary Wire - 25'Pacer's 14 AWG marine wire is built to handle harsh marine environments. It is manufactured to meet and exceed extremely stringent specifications. This 14 AWG marine wire is constructed in-house in Sarasota FL, USA to guarantee the highest level of quality. This cable is built from Type III class K tinned copper. It offers excellent flexibility and durability. The tinned copper conductors are meant to resist corrosion which adds to the longevity of the wire. What type of insulation is used? Well, when the copper is tinned, the next step is to insulate it with a flexible yet durable PVC jacket. This insulation protects the wire and makes it resistant to a variety of hazards. These hazards include; alkali, abrasion, acid, gas, oil, flame, and moisture. What compliances and standards does Pacer's Wire meet? This marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.Features: Stranded, tinned copper conductors Highly flexible color-coded insulation Compliances: UL Standard 1426 BC-5W2 ABYC: E-11.15 UL: MTW Coast Guard: 33 CFR 183.401 Subpart 1-Electrical Systems Temperature Rating: 105 °C Dry, 75 °C Wet Characteristics: Conductor: Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation: -20 °C to 105 °C Flexible, Color Coded PVC Voltage Rating: 600-V Resistant to: Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture Applications: Point-to-point wiring Internal wiring of panels and motors Specifications: AWG: 14 Length: 25 ft. Color: Green Cond. Stranding: 41/0.0100    Nom. Insulation: 0.032 Nom. O.D.: 0.145 Nom. Circular Mils: 4100 Approximate LB/M: 22.0 Specifications: Color: Green Gauge: 14 AWG Length (Feet): 25' Box Dimensions: 2"H x 4"W x 4"L WT: 0.65 lbs UPC: 840248212656 Brochure (pdf)

Read more less

22-18 AWG Fully-Insulated Male Disconnect Terminal - Red - 25 PackCreating a solid connection is important in every part of an electrical system. Being able to disconnect and reconnect makes maintenance that much easier. With Pacer's heat-shrink fully insulated disconnect terminals, users get the best of both worlds. Heat shrink terminals protect against the elements in the most challenging of environments. They offer the best moisture protection available. How do they do this? This heat-shrink fully insulated disconnect terminals have a built-in heat-activated adhesive liner.This liner provides a rugged, environmentally sealed connection for wires from 22 AWG - 10 AWG. No longer will users need to worry about exposure to water, oil, gas, or other corrosive compounds. These terminals even protect connections from physical abuse and abrasion. Disconnects allow the user to easily separate the connection if needed. This makes removing a piece of equipment or completing field service maintenance a breeze. The insulation color indicates the wire gauge the terminal should be used on. Red insulation is for 22-18 AWG. Blue insulation is for 16-14 AWG. Yellow insulation is for 12-10 AWG. Selecting the correct heat shrink fully insulated disconnect terminal isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Provides strain relief Characteristics: Shrink Ratio: Approx. 3:1 at 135 °C Operating Temp: -55 °C - 125 °C Vol. Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: AWG: 22-18 Disc./Bullet Size: 0.250 in. Insulation Color: Red Package Size: 25 Compliances: UL CSA RoHS Specifications: Gauge: 22-18 AWG Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 840248207652 Brochure (pdf)

Read more less

Tinned Lug 1 AWG - 3/8" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 1 Stud Size: 3/8” Length: 1.719” Width: 0.692” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 1 AWG Heat Shrink: No Package Qty: 10 Post Size: 3/8" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.3 lbs UPC: 840248209724 Brochure (pdf)

Read more less

Tinned Lug 1 AWG - 1/4" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 1 Stud Size: 1/4” Length: 1.719” Width: 0.692” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 1 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/4" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.45 lbs UPC: 840248205436 Brochure (pdf)

Read more less

22-18 AWG Fully-Insulated Male Disconnect Terminal - Red - 100 PackCreating a solid connection is important in every part of an electrical system. Being able to disconnect and reconnect makes maintenance that much easier. With Pacer's heat-shrink fully insulated disconnect terminals, users get the best of both worlds. Heat shrink terminals protect against the elements in the most challenging of environments. They offer the best moisture protection available. How do they do this? This heat-shrink fully insulated disconnect terminals have a built-in heat-activated adhesive liner.This liner provides a rugged, environmentally sealed connection for wires from 22 AWG - 10 AWG. No longer will users need to worry about exposure to water, oil, gas, or other corrosive compounds. These terminals even protect connections from physical abuse and abrasion. Disconnects allow the user to easily separate the connection if needed. This makes removing a piece of equipment or completing field service maintenance a breeze. The insulation color indicates the wire gauge the terminal should be used on. Red insulation is for 22-18 AWG. Blue insulation is for 16-14 AWG. Yellow insulation is for 12-10 AWG. Selecting the correct heat shrink fully insulated disconnect terminal isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Provides strain relief Characteristics: Shrink Ratio: Approx. 3:1 at 135 °C Operating Temp: -55 °C - 125 °C Vol. Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: AWG: 22-18 Disc./Bullet Size: 0.250 in. Insulation Color: Red Package Size: 100 Compliances: UL CSA RoHS Specifications: Gauge: 22-18 AWG Box Dimensions: 2"H x 3"W x 8"L WT: 0.4 lbs UPC: 840248207669 Brochure (pdf)

Read more less

Tinned Lug 2 AWG - 1/4" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 2 Stud Size: 1/4” Length: 1.625” Width: 0.609” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 2 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/4" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.25 lbs UPC: 840248205597 Brochure (pdf)

Read more less

White 10 AWG Primary Wire - 20'Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 10 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 10 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14 Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture Length - 20 ft. Guage (AWG) - 10 Color - White *Sold as an Individual Specifications: Color: White Gauge: 10 AWG Length (Feet): 20' Box Dimensions: 1"H x 2"W x 4"L WT: 1.1 lbs Brochure (pdf)

Read more less

Tinned Lug 2/0 AWG - 3/8" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 2/0 Stud Size: 3/8” Length: 2.063” Width: 0.813” Clearance: 0.500” Package Size: 10 Specifications: Gauge: 2/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 3/8" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.5 lbs UPC: 840248205535 Brochure (pdf)

Read more less

Tinned Lug 2/0 AWG - 1/4" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 2/0 Stud Size: 1/4” Length: 2.063” Width: 0.813” Clearance: 0.500” Package Size: 10 Specifications: Gauge: 2 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/4" Type: Lugs Box Dimensions: 1"H x 5"W x 8"L WT: 0.5 lbs UPC: 840248205511 Brochure (pdf)

Read more less

Tinned Lug 1/0 AWG - 1/4" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 1/0 Stud Size: 1/4” Length: 1.844” Width: 0.734” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 1/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/4" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.3 lbs UPC: 840248209687 Brochure (pdf)

Read more less

16-14 AWG Fully-Insulated Male Disconnect Terminal - Blue - 25 PackCreating a solid connection is important in every part of an electrical system. Being able to disconnect and reconnect makes maintenance that much easier. With Pacer's heat-shrink fully insulated disconnect terminals, users get the best of both worlds. Heat shrink terminals protect against the elements in the most challenging of environments. They offer the best moisture protection available. How do they do this? This heat-shrink fully insulated disconnect terminals have a built-in heat-activated adhesive liner.This liner provides a rugged, environmentally sealed connection for wires from 22 AWG - 10 AWG. No longer will users need to worry about exposure to water, oil, gas, or other corrosive compounds. These terminals even protect connections from physical abuse and abrasion. Disconnects allow the user to easily separate the connection if needed. This makes removing a piece of equipment or completing field service maintenance a breeze. The insulation color indicates the wire gauge the terminal should be used on. Red insulation is for 22-18 AWG. Blue insulation is for 16-14 AWG. Yellow insulation is for 12-10 AWG. Selecting the correct heat shrink fully insulated disconnect terminal isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Provides strain relief Characteristics: Shrink Ratio: Approx. 3:1 at 135 °C Operating Temp: -55 °C - 125 °C Vol. Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: AWG: 16-14 Disc./Bullet Size: 0.250 in. Insulation Color: Blue Package Size: 25 Compliances: UL CSA RoHS Specifications: Gauge: 16-14 AWG Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs UPC: 840248207591 Brochure (pdf)

Read more less

Orange 20-22 AWG Wire Ferrule - 6mm Length - 25 PackWire fraying can quickly become a problem when dealing with IEC (European)-style terminal blocks. As the wire frays, the connection becomes weaker, and the problem will need to be addressed. But all that can be prevented. How? By utilizing wire ferrules. Wire ferrules are a type of terminal that prevents wire fraying. It covers the stranded wire and creates a solid, connected piece. In a sense, wire ferrules make stranded wire behave like solid wire. This is important, especially when working with IEC terminal blocks.How are wire ferrules properly used? The first step is to strip the wire to the correct length. Now slide the ferrule over the exposed wire. Make sure that the nylon casing butts up to the wire insulation. Once set, crimp using the proper tool. Using the proper tool is important, as, without the proper pressure, the wire may not create a solid connection. Proper crimping pressure and technique are key to ensuring continued performance. Once properly crimped, users can add heat shrink for added protection if they choose. Features: Prevent strand separation while minimizing strand breakage Insulated ferrules provide additional electrical insulation Increase connection reliability when terminating stranded wire in terminal blocks Specifications: Package Size: 25 Wire Size (AWG): 20-22 Insulation Color: Orange Ferrule Length: 6mm (0.24 in.) Stripping Length: 8mm (0.31 in.) Quick Guide (pdf)

Read more less

Push/Pull Switch Two-PositionTwo-position, off/on. For operating one set of lights or other accessory.These switches have large, easy-to-pull handles. They are commonly used for operating lights. 3/4" diameter chrome-plated knob, brass case. Include screw terminals for connection without a wire lug. For 12-volt D.C. only. Not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: ON-OFF Color: Chrome Plated Box Dimensions: 2"H x 3"W x 7"L WT: 0.3 lbs UPC: 022697756336

Read more less

115-12-35CD Power SupplyThis super-rugged DC power supply is ideal for powering 12-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.Features: Excellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions) Polyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments The heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input/output fusing Thermally activated cooling fan on “CD” units Specifications: Nominal Input/VAC: 115/230     Maximum Input Current @115: 7.5 Maximum Input Current @230: 3.5 Output Amperage (Intermittent): 35 Output Amperage (Continuous): 35 Weight: 32 lbs. / 14.6 kg Case Size:H x W x D (inch): 6.5” x 9.5” x 14.0”Input Range105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VACOperating TemperatureC.D. Units - 0-65 degrees C, Derate linearly from 100% @ 50 degrees C to 50% @ 65 degrees C thermal Shutdown @ 85 degrees C case temperatureDuty Cycle: Intermittent: 20 minutes max on time, 20% duty Continuous: 24 hours/day 100% Duty Options: Modify for use as a battery charger The output voltage is adjusted (see Output Voltage for range) Transfer relay for back-up battery in event of power failure (ERC option) Output Voltage: 13.6 VDC (internally adjustable 12.6-14.5 VDC) Ripple: 40mV P-P (@ 110-125 / 220-250 VAC input) 1% Line and Load (@ 110-125 / 220-250 VAC input) Mechanical: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal-coated PC board This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

12V Trolling Motor Connection with ChargingUsers can do this by themselves since this versatile product allows them to connect any 12V trolling motor, MotorGuide, MinnKota, onboard charging systems, or other power needs. Also, this charging connection can be connected to shallow water anchors, sporting clay machines with solar charging, and ATVs with accessory needs. Features: How-to instructions are included Plug-and-play connections lithium-compatible 8-gauge marine-grade wire with heat-shrinkable butt splices Integrated charging leads

Read more less

Multi 4 Lead Accessory for Main BatteryThe Multi 4 connector is for connecting your fishing, ice fishing, or other accessories. Connect an onboard charger, depth finders, downriggers, radios, lights, and a host of other accessories. Use with:  RCE12VBPK RCE12VB0MK RCE12VBM6K RCE12VBM6CK RCE12VBM6ICK  RCE12VBM6PK Features: Multi 4 connection to power your outdoor equipment easily and quickly Plug & Play Connections  Lithium Compatible Suitable for use t-40° to 221° UL1977  120 Amp Rating

Read more less

36V Trolling Motor Separated Battery SystemThis is a 5 ft. extension on the RCE36VB5CHK kit. Designed for boats with two batteries in one compartment and the third in a different compartment.Features: Plug & play connections 8-gauge marine grade wire with 60” separated battery connection for the bass center console and other boats with multiple battery compartments Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof Lithium compatible

Read more less

12V Parallel Battery Connection SystemThis 12V parallel battery connection kit creates the perfect parallel connection for use in extended battery power needs, such as 12V trolling motors, ATVs, RVs, ice houses, agricultural equipment, sump pumps, lights, cabins, and anywhere extended 12V power is needed. Also, for boats and other applications needing to create more power for running 12V trolling electronics, live wells, bilge pumps, power poles, and more starting batteries for large outboards, batteries draw power from both batteries and will charge together off the alternator or charger at the same time. If users need more power and voltage to start, using this product, users can run all their electronics, live wells, and bilge pumps off a dual battery setup. This is the product to power a boat for longer days on the water without the worry of draining the main battery, so users will always have the power they need to spend more time on the water. Features: Plug-and-play connections are lithium-compatible Parallel multi-purpose 6-gauge battery connections with an 8-gauge parallel system for powering small trolling motors, wenches, halogen lights, AG equipment, etc. Marine grade components

Read more less