1-1/2" Type A2 Fuel Fill Hose - Sold by the FootTrident 1-1/2" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). Features:  Sold by the foot  This hose is built with the best fuel, fire, and age-resistant formulation  Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also, provides excellent bend-ability Applications: Marine Fuel Hose for fill and vent plus diesel distribution Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube & Cover: NBR / Neoprene  Reinforcement: High tenacity polyester 2 spiral, spring steel helix Temperature Range: -20°F to 212°F (-20ºC to 100ºC)  Specifications: Inner Diameter: (inch) 1-1/2" / (mm) 38 Outer Diameter: (inch) 2 / (mm) 51 Wall: (inch) 0.25 / (mm) 6.4 Working Pressure: (psi) 60 / (mpa) 0.41 Bend Radius: (inch) 5.5" / (mm) 140 *The #327 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type ApprovedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1-1/2" Length (Feet): Sold By The Foot Box Dimensions: 2"H x 2"W x 12"L WT: 1 lbs Quick Guide (pdf)

Read more less

Portable Fuel Tank - 6 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Includes gauge.Features: 6 Gallon fuel capacity Compatible with 1/4" NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve Cap with built-in vacuum valve means no need for manual venting High-contrast & easy to read gauge Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 19.82" Width: (inch) 13.50" Height: (inch) 9.16" *Fuel line is not includedWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - (1-1/16" – 1-1/2") Clamping Range - 10-Pack - SAE Size 16Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 16 Hose Inner Diameter: (inch) 7/8" – 1" Clamping Range: (inch) (1-1/16") – (1-1/2") / (mm) 26-38 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

Diesel Formula Fuel Stabilizer & Performance Improver - 32ozSTA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer – Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.BOTTLE DIRECTIONS:To measure small quantities of this diesel fuel additive: remove small cap and seal (on long neck) squeeze bottle to desired level, and pour. To measure large quantities of fuel treatment: remove large cap and seal, pour (measurements on bottle side).USAGE DIRECTIONS:For in-season use: 1 oz. (30mL) treats up to 10 gallons (38L) of fuel. For storage: Use 1 oz. (30mL) to 5 gallons (19L).  DO NOT OVERTREAT. Diesel Formula STA-BIL® is recommended for use AT EVERY FILL UP for year round protection. Product does not contain alcohol.Features: Diesel fuel additive that prevents sludge and sediment formation Clean & lubricate entire fuel system Protect against corrosion with specially formulated diesel fuel STA-BILizers Reduces oxidation of diesel fuel caused by thermal breakdown Removes water Compatible with all ULSD & biodiesel blends Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Engine & Fuel Box Dimensions: 3"H x 5"W x 10"L WT: 2.05 lbs UPC: 073905222549

Read more less

Fuel Stabilizer - 1 GallonAMERICA’S #1 FUEL STABILIZER TREATMENTSTA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing.USAGE DIRECTIONS:Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longekeeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc.PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Engine & Fuel Box Dimensions: 5"H x 7"W x 10"L WT: 7.15 lbs UPC: 073905222136

Read more less

Original Equipment Quality Replacement Tilt Trim Motor for Yamaha 2011-2021Replacement outboard tilt trim motor that will fit Yamaha 150-250HP, 2011-2021 4 Stroke.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: YAMAHA Tilt Trim Motor 63P-43880-11-00 YAMAHA Tilt Trim Motor 63P-43880-21-00 YAMAHA Tilt Trim Motor 63P-43880-22-00 YAMAHA Tilt Trim Motor 63P-43880-10-00 YAMAHA Tilt Trim Motor 6KW-43880-00-00 YAMAHA Tilt Trim Motor 6KW-43880-01-00 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Portable Fuel Tank Cap with Tether - EPA CertifiedHigh-flow valve exceeds OEM engine fuel flow requirements. Be sure your fuel system is safe; the ratchet feature ensures a proper seal while the tether prevents cap loss. Very versatile; designed for 0 to 350 horsepower engines.Features: Standard 2 ¼ inch neck for convenience Includes high-flow automatic vacuum valve Tether Included Compatible with 8803LP/8806LP/8812LP/8812LLP Tanks Easy-to-grip cap features ratcheting noise so you know it’s properly sealed Quick Guide (pdf)

Read more less

Honda Fuel Line Kit - 3/8" Diameter x 6' LengthThis EPA-certified Attwood Honda Fuel Line Kit reliably delivers fuel to your Honda engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.Features: These Attwood Hose Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8900-6 Hose and tank fittings come with pre-applied thread sealant There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance For Honda engines and tanks This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines *No Fuel Demand Valve is included in this kit Specifications: ID Diameter (inches): 3/8" Length (Feet): 6' Box Dimensions: 3"H x 9"W x 13"L WT: 1.3 lbs UPC: 022697938220 Quick Guide (pdf)

Read more less

Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (1998 & Newer)This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. It also includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and hose fitting engine end 8896LP6 Universal for any engines and tanks In-Line Fuel Demand Valve The kit also has a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance *This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines Specifications: ID Diameter (inches): 3/8" Length (Feet): 6' Box Dimensions: 3"H x 10"W x 14"L WT: 1.25 lbs UPC: 022697938626 Quick Guide (pdf)

Read more less

3/8" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the FootTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.Features:  Sold by the foot Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Applications: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.681 / (mm) 17.3 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 2" / (mm) 50.8 Weight: (lb/100 ft.) 15.6 / (kg/m) 0.233 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 3/8" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 1"L WT: 0.17 lbs Quick Guide (pdf)

Read more less

Bolt Kit - Mount N62 Alternator to Mercedes Supplied N62 BracketThe ARCO Marine TAK210 is a specialized bolt kit designed to mount an ARCO Zeus High Output Alternator (specifically an N62 type) onto a factory-supplied Mercedes-Benz N62 bracket.

Read more less

Zeus A8000-48V 8kW Ford Transit Alternator with Isolated Ground & K6 PulleyARCO Zeus 48V Advantage. Better Technology = Better Performance. High Output/High Amperage Alternator: The Highest Power Output in Its Class.A8000-48V AdvantageThe ARCO Zeus A8000-48V alternator turns on at lower RPMs, runs cooler, and provides more power than other 48V alternators that are larger and heavier. This alternator continuously generates over 3kW (55 Amps) at 2,500 RPM and almost 6kW (111 Amps) at 4,000 RPM. Put in real-world terms, a marine diesel engine charging at 1,200 RPM with a 3.13:1 pulley ratio is generating just over 5kW (97 Amps), and a Mercedes Sprinter at 750 RPM with a 3.21:1 ratio is generating over 3kW (55 Amps)!True 24V AlternatorsInstead of using rotors designed for 48 volts, many competitor’s alternators simply use their 12V rotors, which are less efficient and limit output at all RPMs. In this scenario, your external smart regulator must drastically reduce the field by as much as 78%. If this is not done correctly, you run the risk of destroying the unit and damaging other components in your system. ARCO utilizes a native 48V rotor and field current. This results in our 48V alternator running cooler than competitors’ 48V alternators, having a direct impact on the alternator’s lifespan.Features: Replace your noisy generator! Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance: Heat-shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat, keeping the high amp alternator cooler for sustained amperage output. For maximum performance or lithium battery charging, use the ARCO Zeus Bluetooth Alternator Regulator. Technical Specifications: Voltage - 48V Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 15.89lbs/7.2kg Regulation - External Only (EX) Finish - (Black) E-coating Cut-In RPM - 1,920 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 80A Rated, Avalanche Max Output (Cold, 9,000 RPM) at 53.5v - 180 Amps - 9,360 Watts – 14.8 kW PTO Sustained Cruising Output (Hot, 6,000 RPM) at 53.5v - 138 Amps - 7,383 Watts – 10.5 kW PTO Sustained Idle Output (Hot, 2,500 RPM) at 53.5v - 78 Amps 4,173 Watts – 6kW PTO Max Continuous Operating Temperature - 100°C / 212°F

Read more less

Top Mount Inboard Starter - Counter Clockwise RotationTop mount inboard starter that fits Mercruiser, Pleasurecraft, Crusader, Marine Power, and More. ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid.  And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:CRUSADER Inboard Starter 42091CRUSADER Inboard Starter 42150DELCO Inboard Starter 19010612DELCO Inboard Starter 19010615MARINE POWER Inboard Starter 0171-000MERCURY Inboard Starter 50-17251A3MERCURY Inboard Starter 50-47455MERCURY Inboard Starter 50-65784A1MERCURY Inboard Starter 50-76965A1MERCURY Inboard Starter 50-76965A3MERCURY Inboard Starter 50-76965A4MERCURY Inboard Starter 50-99419A3MERCURY Inboard Starter 50-808011A1PLEASURECRAFT Inboard Starter RA122009SIERRA Inboard Starter 18-5902SIERRA Inboard Starter 18-5908This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Zeus A220/3000W 12V HD High Output Alternator - J180 MountARCO Zeus Heavy Duty Alternator is engineered for maximum output and extended-duty performance in demanding marine and diesel applications. Delivering the highest power output in its class, this high-amperage alternator is built to rapidly charge large battery banks and support high electrical loads with confidence.Zeus Heavy Duty operates at exceptionally cool temperatures thanks to dual internal cooling fans, ensuring sustained performance, extended service life, and reliable power production over long run times. Its high-energy output reduces reliance on onboard generators by producing more usable power directly from your engine.Features: Replace your noisy generator Designed for Extended Duty Operation Engineered for high energy production Rapidly charges large battery banks Coolest operating temperatures for increased performance, with dual internal fans Reduces the need for a generator by creating additional power with your engine External Regulation Required SAE J1171 Certified Regulation:External Only (EX): These units will come with a terminal block and a P-Type harness. They will only work with an external regulator, such as an ARCO Zeus Bluetooth alternator regulator.Specifications: Voltage: 12V Field Type: P Rotor Poles: 12 Weight: 18.7 lb (8.5 kg) Regulation: External Only (EX) Cut-In RPM: 1,288 Maximum Alt RPM: 10,000 Rear Battery Post: M8 Thread Standard Pulley: K8 59 mm Shaft Diameter: 7/8 in (22.22 mm) Avalanche Diodes: 50 amps Max Output (Cold): 249 amps Sustained Cruising Output (Hot, 6,000 RPM): 228 Amps Sustained Idle Output (Hot, 3,000 RPM): 200 amps Max Continuous Operating Temperature: 125°C Brochure (pdf)

Read more less

Zeus A220/3000W 12V HD High Output Alternator - Pad MountARCO Zeus Heavy Duty Alternator is engineered for maximum output and extended-duty performance in demanding marine and diesel applications. Delivering the highest power output in its class, this high-amperage alternator is built to rapidly charge large battery banks and support high electrical loads with confidence.Zeus Heavy Duty operates at exceptionally cool temperatures thanks to dual internal cooling fans, ensuring sustained performance, extended service life, and reliable power production over long run times. Its high-energy output reduces reliance on onboard generators by producing more usable power directly from your engine.Features: Replace your noisy generator Designed for Extended Duty Operation Engineered for high energy production Rapidly charges large battery banks Coolest operating temperatures for increased performance, with dual internal fans Reduces the need for a generator by creating additional power with your engine External Regulation Required SAE J1171 Certified Regulation:External Only (EX): These units will come with a terminal block and a P-Type harness. They will only work with an external regulator, such as an ARCO Zeus Bluetooth alternator regulator.Specifications: Voltage: 12V Field Type: P Rotor Poles: 12 Weight: 18.7 lb (8.5 kg) Regulation: External Only (EX) Cut-In RPM: 1,288 Maximum Alt RPM: 10,000 Rear Battery Post: M8 Thread Standard Pulley: K8 59 mm Shaft Diameter: 7/8 in (22.22 mm) Avalanche Diodes: 50 amps Max Output (Cold): 249 amps Sustained Cruising Output (Hot, 6,000 RPM): 228 Amps Sustained Idle Output (Hot, 3,000 RPM): 200 amps Max Continuous Operating Temperature: 125°C Brochure (pdf)

Read more less

Zeus A115/3500W 24V HD Hight Output Alternator - J180 MountARCO Zeus Heavy Duty Alternator is engineered for maximum output and extended-duty performance in demanding marine and diesel applications. Delivering the highest power output in its class, this high-amperage alternator is built to rapidly charge large battery banks and support high electrical loads with confidence.Zeus Heavy Duty operates at exceptionally cool temperatures thanks to dual internal cooling fans, ensuring sustained performance, extended service life, and reliable power production over long run times. Its high-energy output reduces reliance on onboard generators by producing more usable power directly from your engine.Features: Replace your noisy generator! Suitable for most diesel applications Designed for extended duty operation Engineered for high energy production Rapidly charges large battery banks. Coolest operating temperatures for increased performance, with dual internal fans Reduces the need for a generator by creating additional power with your engine. External Regulation Required Regulation:External Only (EX): These units will come with a terminal block and a P-Type harness. They will only work with an external regulator, such as an ARCO Zeus Bluetooth alternator regulator.Specifications: Voltage: 24V Field Type: P Rotor Poles: 12 Weight: 18.7 lb (8.5 kg) Regulation: External Only (EX) Cut-In RPM: 1,288 Maximum Alt RPM: 10,000 Rear Battery Post: M8 Thread Standard Pulley: K8 59 mm Shaft Diameter: 7/8 in (22.22 mm) Avalanche Diodes: 50 amps Max Output (Cold): 132 amps Sustained Cruising Output (Hot, 6,000 RPM): 104 Amps Sustained Idle Output (Hot, 3,000 RPM): 89 amps Max Continuous Operating Temperature: 125°C Brochure (pdf)

Read more less

Zeus A115/3500W 24V HD High Output Alternator - Pad MountARCO Zeus Heavy Duty Alternator is engineered for maximum output and extended-duty performance in demanding marine and diesel applications. Delivering the highest power output in its class, this high-amperage alternator is built to rapidly charge large battery banks and support high electrical loads with confidence.Zeus Heavy Duty operates at exceptionally cool temperatures thanks to dual internal cooling fans, ensuring sustained performance, extended service life, and reliable power production over long run times. Its high-energy output reduces reliance on onboard generators by producing more usable power directly from your engine.Features: Replace your noisy generator! Suitable for most diesel applications Designed for extended duty operation Engineered for high energy production Rapidly charges large battery banks. Coolest operating temperatures for increased performance, with dual internal fans Reduces the need for a generator by creating additional power with your engine. External Regulation Required Regulation:External Only (EX): These units will come with a terminal block and a P-Type harness. They will only work with an external regulator, such as an ARCO Zeus Bluetooth alternator regulator.Specifications: Voltage: 24V Field Type: P Rotor Poles: 12 Weight: 18.7 lb (8.5 kg) Regulation: External Only (EX) Cut-In RPM: 1,288 Maximum Alt RPM: 10,000 Rear Battery Post: M8 Thread Standard Pulley: K8 59 mm Shaft Diameter: 7/8 in (22.22 mm) Avalanche Diodes: 50 amps Max Output (Cold): 132 amps Sustained Cruising Output (Hot, 6,000 RPM): 104 Amps Sustained Idle Output (Hot, 3,000 RPM): 89 amps Max Continuous Operating Temperature: 125°C Brochure (pdf)

Read more less

Mercruiser Tilt Trim Reservoir KitTilt trim reservoir kit that will fit ARCO 6275 Tilt Motor. Replaces Mercruiser. Includes Reservoir, cap, O-rings, and mounting screws.Replaces:Mercury Marine 18525A1*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 4"H x 5"W x 8"L WT: 0.75 lbs UPC: 693006002194

Read more less

High-Performance Inboard Starter with Gear Reduction & Permanent Magnet - Clockwise RotationThe inboard starter includes a wiring harness to replace the conventional starter.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid.  And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:BRP/ OMC 981821BRP/ OMC 987969MERCURY 50-56886PLEASURECRAFT RA122001VOLVO 835635-4VOLVO 841066-4SIERRA 18-5903SIERRA 18-5914SIERRA 18-5923WILL ALSO REPLACE ARCO 70100 AND 70110This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Replacement Outboard Tilt Trim Motor - Yamaha, 2-Wire, 3 Bolt, Flat Blade ShaftReplacement outboard tilt trim motor that will fit Yamaha 1992-2002 90 HP, 1992-1995 50-90 HP, 1994 40 HP, 1996 70-90 HP, 1997-Up 60, 70, 90 HP, 2-wire connection, 3-bolt mount, Includes O-ring, Flat-blade shaft, Ring Terminal Ends.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:YAMAHA Tilt Trim Motor 6H1-43880-02SIERRA Tilt Trim Motor 18-6781This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Suncover for FlushmasterThe Flushmaster Suncover protects your Flushmaster screen from UV damage, ensuring long-lasting performance. Made with UV-resistant plastic and a durable 316 stainless steel hinge, it offers superior protection and easy installation with three mounting holes. Keep your device in top condition for every outing.Protect your Flushmaster from the elements with our custom-fit Suncover. Designed to shield your unit from UV rays, salt spray, and debris, it helps extend the life of your equipment and keeps it looking new. The durable, weather-resistant material ensures your Flushmaster is safeguarded whether you're on the move or docked.Features: Superior UV Protection: Crafted from a premium custom blend of plastic infused with UV additives, the Sun Cover effectively combats sun damage, preserving the integrity, aesthetics, and functionality of your Flushmaster device. Enhanced Durability: The robust construction of the cover offers exceptional resistance to drops and impacts, safeguarding your device during both storage and operation. Marine-Grade Components: The suncover incorporates a 316 stainless steel hinge, renowned for its corrosion resistance. It is built to withstand the demanding marine environment, ensuring long-lasting durability. Upgraded Mounting: Designed with three mounting holes instead of the standard one on the Flushmaster device, this sun cover is sure to make positioning and mounting your device easier than ever. Invest in the Flushmaster Sun Cover to maintain the reliability and longevity of your outboard flushing system, ensuring your equipment remains in peak condition for every voyage.Installation: Remove the mounting bracket from the Flushmaster Place Suncover on Flushmaster Screw the Suncover bracket into the Flushmaster

Read more less

Primer Bulb - 3/8" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features: It is intended for use with a 3/8-inch interior diameter hose Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour) Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified Specifications: ID Diameter (inches): 3/8" Box Dimensions: 3"H x 5"W x 7"L WT: 1.3 lbs UPC: 022697930385 Quick Guide (pdf)

Read more less

Mercury Fuel Line Kit - 3/8" Dia. x 6' Length with Fuel Demand ValveThis EPA-certified Attwood Mercury Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6 It also includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine. Hose and tank fittings come with pre-applied thread sealant For Mercury engines and tanks Tank Side: Universal Sprayless Quick-Connect *This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines Specifications: ID Diameter (inches): 3/8" Length (Feet): 6' Box Dimensions: 3"H x 9"W x 13"L WT: 1.3 lbs UPC: 022697938244 Quick Guide (pdf)

Read more less

Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand ValveThis EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6 In-Line Fuel Demand Valve Hose and tank fittings come with pre-applied thread sealant Reliably delivers fuel to your Johnson or Evinrude engine *This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines Specifications: ID Diameter (inches): 3/8" Length (Feet): 6' Box Dimensions: 2"H x 9"W x 13"L WT: 1.35 lbs UPC: 022697938053 Quick Guide (pdf)

Read more less

In-Line Fuel Overflow ProtectorThe fuel vent line surge protector helps avoid refueling spills because the surge-free line causes automatic fuel nozzles to shut off as the tank fills.With non-automatic nozzles, the surge protector causes a gurgling sound to indicate that the tank is full.Incorporates a ball-style check valve with internal baffling.Features: Meets ABYC Standard H-24 Install in-line with traditional tank vent systems that use standard 5/8" ID vent hose Compact size and operates in any orientation within 45° of vertical Withstands oil, gas, alcohol-blended fuels Includes 2 hose clamps for installation in the vent hose WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Universal Sprayless Connector - Male & FemaleSafely eliminate dangerous spraying of fuel when connecting or disconnecting pressurized hoses during fueling or maintenance. Comes complete with a thread-sealer for fast, easy installation; no additional supplies are required.Features: 8838HF6 Female Hose Fitting and 8838TM6 Male Threaded Tank Fitting Pre-applied fuel-grade thread sealant prevents fuel leaks Include check valves that automatically close upon disconnecting High fuel flow fitting (less than .25kPa restriction at 50 liters/hour) Compatible with Ethanol blended fuels High-strength body engineered to withstand tough marine environments Pre-applied fuel-grade thread sealant prevents leaks and saves you time Compatible with 3/8 inch fuel lines, Ethanol blended fuels, and all original equipment manufacturer (OEM) brand engines Can be used with portable generators and other portable fuel tanks *Meets all EPA and CARB (California Air Resources Board) requirements

Read more less

4" Fiberglass Exhaust Tubing ConnectorThe fiberglass connectors are corrosion-resistant high-temperature exhaust tubes designed specifically to minimize exhaust gas and cooling water flow restrictions on wet exhaust systems. Precise outside diameters facilitate perfect connections between sections of tubing and flexible elbows, bellows, or hoses. Meets UL94V-0 for flame retardancy.Specifications: Construction: Natural Fiberglass Resin: Class 1 Fire Retardant Epoxy Vinyl Ester Thermoset Glass: Corrosion Resistant E Glass Color: Amber Reinforcement: Filament Winding Temperature Range: Up to 350°F (177°C) Specifications: ID Diameter (inches): 4" Type: Fittings & Hoses Box Dimensions: 8"H x 8"W x 9"L WT: 1.05 lbs UPC: 704917000336 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-1/2" - 2") Clamping Range - 10-Pack - SAE Size 24Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 24 Hose Inner Diameter: (inch) 1-5/16" - 1-3/8" Clamping Range: (inch) 1-1/2" - 2" / (mm) 38-50 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-1/4" – 1-3/4") Clamping Range - 10-Pack - SAE Size 20Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 20 Hose Inner Diameter: (inch) 1" - 1-1/4"  Clamping Range: (inch) 1-1/4"– 1-3/4"/ (mm) 32-44 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

3/8" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - BlackTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.Features:  Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Application: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC)  Length: 50 ft. (15 m) Boxed Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.681 / (mm) 17.3 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 2" / (mm) 50.8 Weight: (lb/100 ft.) 15.6 / (kg/m) 0.233 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10 Specifications: ID Diameter (inches): 3/8" Length (Feet): 50' Box Dimensions: 3"H x 18"W x 18"L WT: 8.7 lbs UPC: 704917010571 Quick Guide (pdf)

Read more less

6" ID 90-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.Features: Four stainless steel clamps are included This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards) Black high-temp EDPM rubber Construction: Color: Black Reinforcement: Reinforcing ribs on 6” I.D. and above Temperature Range: up to 250°F (121°C) Specifications: Inner Diameter: (inch) 6” / (mm) 152.4 A: (inch) 7" / (mm) 178 B: (inch) 7” / (mm) 178 C: (inch) 2.25” / (mm) 57 D: (inch) 2.25” / (mm) 57 R: (inch) 1.75” / (mm) 44.4 W: (inch) 0.25” / (mm) 6.4 Elbow Degree: 90 degrees Specifications: ID Diameter (inches): 6" Box Dimensions: 8"H x 10"W x 15"L WT: 4.4 lbs UPC: 704917000435 Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 2.28"-2.59" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 1-7/8" to 2" Hose Outer Diameter (inch): 2.28" to 2.59" Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 8.62"-9.19"  RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 8" Hose Outer Diameter (inch): 8.62" to 9.19" Quick Guide (pdf)

Read more less

Outboard Fuel Filter for 3/8 inch LinesProtect your carbureted engine by trapping pollutants before they even reach the engine itself. High-flow, in-line fuel filters will work with most outboard motors.Features:  Use with 3/8 inch fuel lines Works with most outboard motors A clear body allows visual inspection, making it easier to stay on top of maintenance High-strength, impact-resistant, and shatter-resistant construction is ideal for  tough conditions Disposable for ultimate convenience *Best to replace during winterize or spring start-up for optimum results Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 7/16"–21/32" Clamping Range - 10-Pack - SAE Size 4Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 4 Hose Inner Diameter: (inch) 1/4" – 5/16" Clamping Range: (inch) 7/16" – 21/32"  / (mm) 11-17 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-1/16" – 1-1/2") Clamping Range - 10-Pack - SAE Size 16Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 16 Hose Inner Diameter: (inch) 7/8" – 1" Clamping Range: (inch) 1-1/16"– 1-1/2" / (mm) 26-38 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-3/4" – 2-1/4") Clamping Range - 10-Pack - SAE Size 28Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 28 Hose Inner Diameter: (inch) 1-1/2" - 1-5/8"  Clamping Range: (inch) 1-3/4"– 2-1/4" / (mm) 44-56 Recommended Torque Inch lbs: 45-60 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - (5/16" – 9/16") Clamping Range - 10-Pack - SAE Size 3Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 3 Hose Inner Diameter: (inch) 3/16" – 1/4" Clamping Range: (inch) 5/16" – 9/16"  / (mm) 8-14 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 5/8"–15/16" Clamping Range - 10-Pack - SAE Size 8Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 8 Hose Inner Diameter: (inch) 3/8" – 1/2" Clamping Range: (inch) 5/8" – 15/16"  / (mm) 15-24 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 11/32"-25/32" Clamping Range - 10-Pack - SAE Size 6Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 6 Hose Inner Diameter: (inch) 5/16" - 3/8" Clamping Range: (inch) 11/32" – 25/32" / (mm) 13-20 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (3/4" – 1-1/8") Clamping Range - 10-Pack - SAE Size 10Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 10 Hose Inner Diameter: (inch) 1/2" – 5/8" Clamping Range: (inch) 3/4" – 1-1/8" / (mm) 19-28 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

4" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover. Features: Four stainless steel t-bolt clamps Very high temp silicone/EDPM blend rubber - molded This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards  Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous Construction: Color: Blue Temperature Range: up to 350°F (177°C) Specifications: Inner Diameter: (inch) 4” / (mm) 101.6 A: (inch) 5.75” / (mm) 146 B: (inch) 5.75” / (mm) 146 C: (inch) 1.75” / (mm) 44.4 D: (inch) 1.50" / (mm) 38.1 R: (inch) 2” / (mm) 50.8 W: (inch) 0.25" / (mm) 6.4 Elbow Degree: 90 degrees Specifications: ID Diameter (inches): 4" Box Dimensions: 8"H x 8"W x 8"L WT: 2.6 lbs UPC: 704917002071 Quick Guide (pdf)

Read more less

8" ID 45-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover; except elbows of 6" I.D. or larger have molded reinforcing ribs on the outside. Features: Four stainless steel t-bolt clamps Very high temp silicone/EDPM blend rubber - molded This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards  Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous Construction: Color: Blue Reinforcement: Reinforcing ribs on 6” I.D. and above Temperature Range: up to 350°F (177°C) Specifications: Inner Diameter: (inch) 8” / 203.2 mm A: (inch) 2.25” / (mm) 5.7  B: (inch) 2.25” / (mm) 5.7  C: (inch) 8.5” / (mm) 21  R: (inch) 2.12” / (mm) 5.4  W: (inch) 0.37" / (mm) 9.4  Elbow Degree: 45 degrees  Specifications: ID Diameter (inches): 8" Box Dimensions: 8"H x 10"W x 15"L WT: 6.5 lbs UPC: 704917002354 Quick Guide (pdf)

Read more less

3/8" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - GrayThis hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. Features:  Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone   Also, provides excellent rope-like bend-ability and fitting retention For both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%) EPA Certified and CARB Executive Order for low permeation Type B1-15 NMMA Type Accepted & CE certified Application: Marine Fuel Hose for distribution, return, vent and transfer For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Fluoroplastic Internal Barrier Cover: Gray CPE Rubber Reinforcement: 2-Spiral Polyester Plies  Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Length: 50’ (15m) Boxed Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.588 / (mm) 14.9 Burst Pressure: (psi) 175 / (mpa) 1.21 Working Pressure: (psi) 35 / (mpa) 0.24 Bend Radius: (inch) 4" / (mm) 101.6 Weight: (lb/100 ft.) 10.5 / (kg/m) 0.156 Permeation Rate (Standard is (15g/m^2/24hrs (CE10)): 5.0 *The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15 Specifications: ID Diameter (inches): 3/8" Length (Feet): 50' Box Dimensions: 3"H x 18"W x 18"L WT: 6.4 lbs UPC: 704917018065 Quick Guide (pdf)

Read more less

Star-Tron Enzyme Fuel System & Injector Cleaner & PEA Tech - 4 ozRemoves stubborn carbon deposits from fuel injectors, carburetors, valves, and rings. Designed for all engine types requiring fuel system cleaning and improved efficiency. The enzyme and PEA formula restores performance, reduces fuel consumption, and lowers emissions.Features: RESTORE ENGINE POWER - Removes performance-robbing deposits with a proprietary blend of enzymes and cleaners, ensuring smoother operation and increased efficiency MAXIMIZE FUEL ECONOMY - Cleans fuel system components to help reduce fuel consumption and save on gas costs, making it an essential addition to your maintenance routine ADVANCED PEA TECHNOLOGY - Uses Polyetheramine (PEA) technology to clean fuel injectors, carburetors, and intake valves, offering a superior clean that dissolves the toughest carbon deposits ENZYME REJUVANATION - The enzyme formula breathes new life into old, stale fuel, breaking down unwanted deposits and restoring combustion efficiency for smoother starts and operation EASY TO USE SOLUTION - Simply add to your fuel tank and let the engine run, a hassle-free way to maintain engine health and performance without professional help VERSATILE APPLICATION - Suitable for all engine types, including cars, trucks, and boats, ensuring peak performance across a wide range of vehicles LONG-LASTING EFFECTS - One treatment treats up to 40 gallons, offering a cost-effective solution for maintaining your engine’s performance over time RECOMMENDED MAINTENANCE - Use every 4 to 5 tanks or as needed, with Star Tron Enzyme Fuel Treatment at every fill-up for optimal results and continuous protection PEAK PERFORMANCE GUARANTEE - Designed to work with the latest engine technology, it keeps your engine running like new, minimizing the need for costly repairs and downtime Directions:Use 1 fl. oz. of Fuel System & Injector Cleaner for every 10 gallons of fuel being treated. Recommended treatment rate is every 4 to 5 tanks or as often as needed. Using the original Star Tron Enzyme Fuel Treatment at every fuel fill is also recommended to keep engines operating at peak performance levels.

Read more less

Star-Tron Enzyme Fuel Treatment - 32 ozEnsures easy starts and smooth running while curing and preventing ethanol fuel problems. Designed for all gas engines, including boats, cars, motorcycles, ATVs, and lawn equipment. The enzyme technology removes deposits, disperses water, and improves fuel economy while reducing emissions.Features: UNLEASH YOUR ENGINE'S FULL POTENTIAL - Star Tron Enzyme Fuel Treatment uses advanced enzyme technology to ensure all engines start easily and run smoothly, even after months of inactivity. SAY GOODBYE TO ETHANOL-RELATED PROBLEMS - Prevents and cures most ethanol-related issues, including poor performance, rough idling, and decreased fuel economy, giving you peace of mind on the road or on the water. MAXIMIZE FUEL ECONOMY - By removing and preventing gum, carbon deposits, and varnish build-up, Star Tron keeps your fuel delivery system clean, resulting in improved fuel economy. WORKS FOR ALL ENGINES AND FUEL TYPES - Whether you have a car, boat, RV, or lawn mower, Star Tron works in all engines and all fuels, making it the ideal fuel treatment and stabilizer for any vehicle. PREVENT WATER BUILD-UP - Helps prevent phase separation by dispersing water throughout fuel as submicron-sized droplets that are safely eliminated while the engine operates, keeping your engine running smoothly in humid or wet conditions. REVITALIZE OLD FUEL - Star Tron stabilizes fuel up to 2 years and can even help rejuvenate old, sub-spec fuel. REDUCE EMISSIONS & SAVE MONEY - Star Tron reduces smoke and emissions, which are a symptom of poor combustion, which wastes gas and is harmful to our health & planet. Try Star Tron Enzyme Fuel Treatment today and experience the difference. GET MORE BANG FOR YOUR BUCK with Star Tron! At just one fluid ounce per sixteen gallons of fuel, Star Tron Fuel Treatment Formula 930 is an incredibly cost-effective solution for optimizing engine performance and efficiency. #1 SELLING FUEL ADDITIVE: Star Tron is the top-selling and highest-rated gasoline treatment for the prevention of ethanol fuel problems, trusted by thousands of satisfied customers to enhance the performance of all types of engines. Directions:Always add Star Tron® just before each fuel fill up. Remove cap and pour the prescribed amount into tank. Overdosing is not harmful.

Read more less

Flush Port Quick Connect for Mercury - WhiteThe Flush Port Quick Connect for Mercury Outboards eliminates the frustration of stuck caps, stripped threads, and tedious hose connections, delivering fast, easy, and reliable flushing with enhanced visual protection for your engine.Features: No More Stuck Caps Permanent, leak-free upgrade to factory flush ports Marine-grade durability for saltwater use Fast, effortless flushing with secure connection Simple installation – ready in minutes Hassle-free and Saves Time 30-Day Guarantee, 1-Year Warranty Specifications: Materials: Marine-grade construction with 316 stainless steel internals Installation: Replaces OEM flush port with secure, leak-free connection Corrosion Protection: Built for saltwater and harsh environments Application: Works with the Flushmaster system or a direct hose connection What's In The Box? (1) Mercury Male Quick Connect (1) Female Hose Quick Connect (Black) (1) 90-degree Elbow (goes inside the cowling to ensure no kinks are in the Mercury flush hose; use if necessary) (1) Wrench for Tightening (1) Stainless Steel Hose Clamp Mercury Installation: On your engine cowling, remove the original OEM plug. Unscrew the OEM plug from the female hose outlet.  Carefully remove the lanyard from the engine hose. Thread the new Flush Port Quick Connect into the flush port. Reinstall the Flush Port Quick Connect into the engine cowling with the provided wrench, giving it a ¼” turn in the clockwise direction to lock it in place. Remove cowling and inspect flush hose for any kinks in the hose, if there is a kink, replace the Mercury female hose outlet with the provided elbow and hose clamp. Orient the elbow inside the cowling to ensure no kinks are in the Mercury flush hose.Your outboard engine is now prepared for use or flush.To flush, remove the secured cap by turning counter clockwise 1/4” and pull to release. Attach your Flushmaster hose or a water source to the included female quick connector. Connect the female Quick Connect to the flush port. Follow manufacturer specs for flushing, reinstall the cap when finished.

Read more less

Flush Port Quick Connect for Mercury OutboardsThe Flush Port Quick Connect for Mercury outboards makes flushing your Mercury outboards easier, faster, and more securely. Designed to replace factory flush ports, this kit installs in minutes and gives you a permanent, leak-free connection built to withstand the toughest marine environments.Crafted from durable, corrosion-resistant materials, including 316 stainless steel and high-grade polymers, the Flush Port Quick Connect is built for life around saltwater. With the included 90-degree elbow fitting, you’ll avoid hose kinks and ensure maximum water flow for a more complete, effective flush every time.Whether you're flushing with your Flushmaster system or a standard water hose, this upgrade means no more stripped threads, no more frustration, and no more excuses — just a faster, easier way to protect your engine and extend its life.NOTE: The opening at the top of the Mercury Quick Connect cap serves as an indicator of check valve failure and is required by the OEMFeatures: Replaces OEM Flush Port Marine-Grade & 316 SS Construction Leak-Free Performance Easy To Install Hassle-Free and Saves Time What's Included? (1) Mercury Male Quick Connect (1) Female Hose Quick Connect (Black) (1) 90-degree Elbow (goes inside the cowling to ensure no kinks are in the Mercury flush hose; use if necessary) (1) Wrench for Tightening (1) Stainless Steel Hose Clamp Product Installation: Remove the OEM Mercury flush port plug. Unscrew the Mercury OEM plug from the 3/4" female hose outlet. Remove the lanyard from the engine hose. Thread your new Flushmaster Flush Port Quick Connect to the flush port. Reinstall the Flushmaster Flush Port Quick Connect into the engine cowling. Give it a 1/4" turn clockwise to lock it in place. Helpful Tip: Remove the cowling and inspect the flush hose for any kinks. If a kink exists, replace the Mercury 3/4" female hose outlet with the provided elbow. Orient the elbow inside the cowling to ensure no kinks are in the Mercury flush hose. (To help insert the 90-degree elbow, lube the barb or use a heat gun on the flush hose.)WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less