3/8" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - BlackTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.Features:  Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Application: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC)  Length: 50 ft. (15 m) Boxed Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.681 / (mm) 17.3 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 2" / (mm) 50.8 Weight: (lb/100 ft.) 15.6 / (kg/m) 0.233 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10 Specifications: ID Diameter (inches): 3/8" Length (Feet): 50' Box Dimensions: 3"H x 18"W x 18"L WT: 8.7 lbs UPC: 704917010571 Quick Guide (pdf)

Read more less

Alternator Vortec K6 Serpentine Pulley Regulator & Temp Sensor - 170A - 12VBalmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high reliability bearings, robust rectifier diodes and improved heat-sinking capabilities on all our alternators to ensure improved system reliability combined with increased charging power.Features: Vortec K6 Serpentine Pulley Regulator & Temp Sensor 170A Kit 12V This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage: 12v Amperage: 170A Box Dimensions: 11"H x 11"W x 14"L WT: 17.25 lbs UPC: 676205500883 Brochure (pdf)

Read more less

Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting)This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.Features: These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end For Johnson/Evinrude engines and tanks *No Fuel Demand Valve or Tank Fitting is included in this kit Specifications: ID Diameter (inches): 3/8" Length (Feet): 6' Box Dimensions: 3"H x 9"W x 12"L WT: 1.2 lbs UPC: 022697938169 Quick Guide (pdf)

Read more less

Primer Bulb - 5/16" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features: It is intended for use with a 5/16-inch interior diameter hose Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour) Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified Specifications: ID Diameter (inches): 5/16" Box Dimensions: 5"H x 5"W x 5"L WT: 0.55 lbs UPC: 022697935168 Quick Guide (pdf)

Read more less

High-Performance Inboard Starter with Gear Reduction & Permanent Magnet - Clockwise Rotation (Late Model)The high-performance inboard starter that fits many late model 5.0L, and 5.8L Fords.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid.  And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:BRP/OMC 987811BRP/OMC 988012BRP/OMC 3854190PLEASURECRAFT RA122014VOLVO 3854190-0SIERRA 18-5920This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

1-1/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - BlackTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 1-1/4" / (mm) 31.8 Outer Diameter: (inch) 1.40" / (mm) 32 Working Pressure: (Psi) 70 / (bar) 4.8 Bend Radius: (inch) 1.5" / (mm) 38 Weight: (Lb./50ft.) 35 / (Kg/m) 15.7 *Burst Pressure is 4 x Working Pressure Specifications: ID Diameter (inches): 1-1/4" Length (Feet): 50' Box Dimensions: 5"H x 26"W x 26"L WT: 31.8 lbs UPC: 704917004525 Quick Guide (pdf)

Read more less

1-1/2" x 50' Coil Type A2 Fuel Fill HoseTrident 1-1/2" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). Features:  This hose is built with the best fuel, fire, and age-resistant formulation  Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also, provides excellent bend-ability Application: Marine Fuel Hose for fill and vent plus diesel distribution Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube & Cover: NBR / Neoprene  Reinforcement: High tenacity polyester 2 spiral, spring steel helix Temperature Range: -20°F to 212°F (-20ºC to 100ºC)  Length: 50 ft. (15.24 m) Coil Specifications: Inner Diameter: (inch) 1/2" / (mm) 38 Outer Diameter: (inch) 2 / (mm) 51 Wall: (inch) 0.25 / (mm) 6.4 Working Pressure: (psi) 60 / (mpa) 0.41 Bend Radius: (inch) 5.5" / (mm) 140 *The #327 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved Specifications: ID Diameter (inches): 1-1/2" Length (Feet): 50' Box Dimensions: 6"H x 26"W x 27"L WT: 50 lbs UPC: 704917009056 Quick Guide (pdf)

Read more less

High-Performance Inboard Starter with Gear Reduction & Permanent Magnet - Clockwise RotationThe inboard starter includes a wiring harness to replace the conventional starter.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid.  And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:BRP/ OMC 981821BRP/ OMC 987969MERCURY 50-56886PLEASURECRAFT RA122001VOLVO 835635-4VOLVO 841066-4SIERRA 18-5903SIERRA 18-5914SIERRA 18-5923WILL ALSO REPLACE ARCO 70100 AND 70110This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Heavy Duty Current Model Mercruiser Solenoid with Raised Isolated BaseHeavy duty Mercruiser solenoid that will fit Mercruiser and Mercury, Isolated base, 12 Volt.Replaces:MERCURY 89-846070HDMERCURY 89-94318HD*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 3"H x 3"W x 4"L WT: 0.4 lbs UPC: 693006010311

Read more less

Premium Replacement Distributor Cap for Mercruiser Inboard Engines with MPI MotorsThis distributor cap fits Mercruiser V8: 5.0L, 5.7L, 6.2L MPI motors with 555 ECM, PleasureCraft Models MP 5.0L and 5.7L (2002-05), and Volvo Engines with Delco HVS V-8 Distributors.Replaces: MERCRUISER Distributor Cap 884792 MERCRUISER Distributor Cap 898253022 MERCRUISER Distributor Cap 898253T22 MERCRUISER Distributor Cap 8M6001106 PLEASURECRAFT Distributor Cap RA108009 VOLVO PENTA Distributor Cap 3858975 INDMAR Distributor Cap 556345 SIERRA Distributor Cap 18-5244 CDI ELECTRONICS Distributor Cap E64-0006 *ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (3/4" – 1-1/8") Clamping Range - 10-Pack - SAE Size 10Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 10 Hose Inner Diameter: (inch) 1/2" – 5/8" Clamping Range: (inch) 3/4" – 1-1/8" / (mm) 19-28 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-1/16" – 1-1/2") Clamping Range - 10-Pack - SAE Size 16Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 16 Hose Inner Diameter: (inch) 7/8" – 1" Clamping Range: (inch) 1-1/16"– 1-1/2" / (mm) 26-38 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 5/8"–15/16" Clamping Range - 10-Pack - SAE Size 8Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 8 Hose Inner Diameter: (inch) 3/8" – 1/2" Clamping Range: (inch) 5/8" – 15/16"  / (mm) 15-24 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (5/8" – 15/16") Clamping Range - 10-Pack - SAE Size 8Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 8 Hose Inner Diameter: (inch) 3/8" – 1/2" Clamping Range: (inch) 5/8" – 15-16" / (mm) 15-24 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 7/16"–21/32" Clamping Range - 10-Pack - SAE Size 4Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 4 Hose Inner Diameter: (inch) 1/4" – 5/16" Clamping Range: (inch) 7/16" – 21/32"  / (mm) 11-17 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

5/16" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - BlackTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.Features:  Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Application: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC)  Length: 50 ft. (15 m) Boxed Specifications: Inner Diameter: (inch) 5/16" / (mm) 7.92 Outer Diameter: (inch) 0.611 / (mm) 15.5 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 1.75" / (mm) 44.5 Weight: (lb/100 ft.) 13.3 / (kg/m) 0.198 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10 Specifications: ID Diameter (inches): 5/16" Length (Feet): 50' Box Dimensions: 3"H x 18"W x 18"L WT: 7.9 lbs UPC: 704917010564 Quick Guide (pdf)

Read more less

4" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover. Features: Four stainless steel t-bolt clamps Very high temp silicone/EDPM blend rubber - molded This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards  Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous Construction: Color: Blue Temperature Range: up to 350°F (177°C) Specifications: Inner Diameter: (inch) 4” / (mm) 101.6 A: (inch) 5.75” / (mm) 146 B: (inch) 5.75” / (mm) 146 C: (inch) 1.75” / (mm) 44.4 D: (inch) 1.50" / (mm) 38.1 R: (inch) 2” / (mm) 50.8 W: (inch) 0.25" / (mm) 6.4 Elbow Degree: 90 degrees Specifications: ID Diameter (inches): 4" Box Dimensions: 8"H x 8"W x 8"L WT: 2.6 lbs UPC: 704917002071 Quick Guide (pdf)

Read more less

Alternator Protection Module APM12 - 12VAlternators can be subjected to voltage spikes caused by lithium battery shutdowns, intermittent connections, and other over-voltage events.  Balmar has introduced a robust Alternator Protection Module which helps to protect the alternator’s diodes and internal voltage regulator against spikes (clamping up to 60V) and sustained over-voltage conditions (beginning around 20V for the 12V version).  The APM can absorb multiple surges of such energy and can absorb surges in excess of 200 amps without failure to continually protect your alternator.  Visual and audible alarms indicate if the device has been compromised and needs replacement.Balmar APM devices provide intelligent, robust, solid-state protection in a small easily mounted package at the rear of the alternator between the B+ and B- terminals.  Balmar APM devices can be used to protect all alternator brands.  Balmar APM devices meet ISO 16750-2 for Load Dump Protection and ISO 7637-2 for Surge Protection.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Max Charge MC-618 Regulator 12V with Harness Multi-StageThe MC-618-H premium 12-volt multi-stage voltage regulator provides the ultimate in charging safety and control. Includes wiring harness. Features: Intelligent multi-stage regulation. Digital numeric LED display. Epoxy-encapsulated circuitry. For use with 12 volt systems Wiring harness included Can be used to drive twin alternator installations. For use with P-type externally regulated alternators Dash lamp and auxiliary lamp terminals Small engine mode Magnetic programming tool included LiFePo4 (lithium) program Optional alternator and battery temperature sensors sold separately This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Alternator 170 AMP 12V 4" Dual Foot Saddle K6 PulleyBalmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. They install high-reliability bearings, robust rectifier diodes, and improved heat-sinking capabilities on all their alternators to ensure improved system reliability combined with increased charging power.Features: 4" Dual-Foot K6 Serpentine Pulley 170A 12V Case Ground J-180 Mount; Typical for John Deere, Cummins, & Caterpillar Engines This product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 170A Voltage: 12v Box Dimensions: 9"H x 9"W x 10"L WT: 15 lbs UPC: 676205503464 Brochure (pdf)

Read more less

Alternator 120 AMP 12V 3.15" Dual Foot Saddle Dual Pulley with Isolated GroundAlternator, 60 Series, 120A, 12V, Saddle Mount (Dual Foot), 3.15in, Dual Deep Vee Pulley, Isolated Ground Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: 60-120-SR-IGThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 120A Voltage: 12v Box Dimensions: 9"H x 10"W x 10"L WT: 13.65 lbs UPC: 676205131025 Brochure (pdf)

Read more less

Alternator 1-2" Single Foot K6 Serpentine Pulley - 170A - 12VBalmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high reliability bearings, robust rectifier diodes and improved heat-sinking capabilities on all our alternators to ensure improved system reliability combined with increased charging power.Features: 1-2" Single Foot K6 Serpentine Pulley 170A 12V This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage: 12v Amperage: 170A Box Dimensions: 9"H x 10"W x 10"L WT: 14.45 lbs UPC: 676205500852 Brochure (pdf)

Read more less

Portable Fuel Tank - 3 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards.Features:  3 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 16.6" Width: (inch) 11.45" Height: (inch) 7.3" *No gauge or fuel line included Quick Guide (pdf)

Read more less

3/4" Engine Flush Kit & AdaptorThe ConceptA simple quarter-turn quick-release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify winterization and cooling system flushing.In an EmergencyWhile the connected engine is running, close the seacock and remove the quick-release plug. Excess bilge water will be pumped overboard by the engine's raw water pump. Add GROCO BSA to pump out remote bilge locations.For WinterizationClose the seacock, remove the quick-release plug, and insert the service adaptor (included). Anti-freeze can be pumped into the cooling system.For System FlushingClose the seacock and insert the service adaptor. Dockside water can be used to flush the cooling system with the engine running at idle speed.Features:Bronze service adaptorSpecifications: Hose ID (in): 3/4" Thread NPT: 3/4" Overall Length: 3.9" *Add a GROCO Bilge Strainer to pump out remote bilge locations

Read more less

Premium Replacement Ignition Coil for Mercruiser Inboard EnginesThis ignition coil fits MCM 4 Cyl., V-6, and V-8 Engines With Conventional Ignition. Included in some Outboard Applications Replaces: MERCRUISER Ignition Coil 26433 MERCRUISER Ignition Coil 32193 MERCRUISER Ignition Coil 32193A2 MERCRUISER Ignition Coil 33205 MERCRUISER Ignition Coil 38547 MERCRUISER Ignition Coil 392-806529A1 MERCRUISER Ignition Coil 898253T24 OMC STERN DRIVE Ignition Coil 3853548 OMC STERN DRIVE Ignition Coil 915735 VOLVO PENTA Ignition Coil 835998 CHRYSLER INBOARD Ignition Coil 201522 CHRYSLER INBOARD Ignition Coil 2495531 CRUSADER Ignition Coil 37068 SIERRA Ignition Coil 18-5433 CDI ELECTRONICS Ignition Coil E18-0008 *ARCO Assurance 12-month part and labor warranty protection  **Requires External ResistorThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Top Mount Inboard Starter - Clockwise RotationTop mount inboard starter that will fit Mercruiser, Pleasurecraft, Crusader, Marine Power, and more.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Arco Marine part number 30456Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:CRUSADER Inboard Starter 42090DELCO Inboard Starter 19010617MERCURY Inboard Starter 50-47454MERCURY Inboard Starter 50-65785A1MERCURY Inboard Starter 50-79604A1MERCURY Inboard Starter 50-79604A3MERCURY Inboard Starter 50-97499A2MERCURY Inboard Starter 50-97499A3MERCURY Inboard Starter 50-97499R2MERCURY Inboard Starter 50-97499R4PLEASURE CRAFT Inboard Starter RA122008VOLVO Inboard Starter 841377-5WESTERBEKE Inboard Starter 33486SIERRA Inboard Starter 18-5901SIERRA Inboard Starter 18-5907This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

High-Performance Inboard Starter with Gear Reduction & Permanent Magnet - Clockwise Rotation (2.3 Fords)The high-performance inboard starter that fits 2.3L Fords. The kit includes a wiring harness to replace the conventional starter.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:BRP/ OMC Inboard Starter 984628SIERRA Inboard Starter 18-5916SIERRA Inboard Starter 18-5917SIERRA Inboard Starter 18-5927WILL ALSO REPLACE ARCO 70116This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Replacement Outboard Starter Brush KitA replacement brush kit that will fit American-made permanent magnet outboard starters.Replaces:Mercury 63292Mercury 75384Mercury 898265016Mercury 75384-1OMC 385952OMC 433850*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 1"H x 3"W x 4"L WT: 0.09 lbs UPC: 693006002156

Read more less

Original Equipment Quality Replacement Solenoid for Mercruiser, Mercury & Yamaha 4 Stroke - 12V Isolated BaseReplacement solenoid that will fit Mercruiser, Mercury & Yamaha 4 Stroke, Isolated base, 12 Volt.Replaces: MERCURY 89-818999A1 MERCURY 89-818999A2 MERCURY 89-850188A1 MERCURY 89-850188T1 YAMAHA 65W-81941-00 SIERRA 18-5820 *ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

High-Performance Inboard Starter with Gear Reduction & Permanent Magnet - Counter Clockwise Rotation (302/351 Fords)The high-performance inboard starter that fits 302 & 351 Fords. The kit includes a wiring harness to replace the conventional starter.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid.  And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:PLEASURECRAFT Inboard Starter R200000PLEASURECRAFT Inboard Starter RA122002SIERRA Inboard Starter 18-5904SIERRA Inboard Starter 18-5915WILL ALSO REPLACE ARCO 70100 AND 70110This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

316 Stainless Steel T-Bolt Clamp 3/4" Band - Range 8.25" to 8.69" *10-CountVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation. These clamps can be used on any hose connection with peace of mind that they will last you a very long time. These clamps are sold in 2 configurations; part numbers ending in “L” signify that a long T-Bolt is being used and is for our Rubber Hose products. The part number without the “L” is for our Silicone and PVC products. 3-Year Warranty. Quick Guide (pdf)

Read more less

2" Type A2 Fuel Fill Hose - Sold by the FootTrident 2" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). Features:  Sold by the foot This hose is built with the best fuel, fire, and age-resistant formulation  Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also, provides excellent bend-ability Applications: Marine Fuel Hose for fill and vent plus diesel distribution Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube & Cover: NBR / Neoprene  Reinforcement: High tenacity polyester 2 spiral, spring steel helix Temperature Range: -20°F to 212°F (-20ºC to 100ºC) Specifications: Inner Diameter: (inch) 2" / (mm) 50.8 Outer Diameter: (inch) 2.48 / (mm) 63.5 Wall: (inch) 0.25 / (mm) 6.4 Working Pressure: (psi) 50 / (mpa) 0.345 Bend Radius: (inch) 7.0" / (mm) 178 *The #327 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type ApprovedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 2" Length (Feet): Sold By The Foot Box Dimensions: 2"H x 2"W x 2"L WT: 1.12 lbs Quick Guide (pdf)

Read more less

3/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - BlackTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 3/4" / (mm) 20 Outer Diameter: (inch) 1.15" / (mm) 29 Working Pressure: (Psi) 100 / (bar) 6.9 Bend Radius: (inch) 1" / (mm) 25 Weight: (Lb./50ft.) 23 / (Kg/m) 10.3 *Burst Pressure is 4 x Working Pressure Specifications: ID Diameter (inches): 3/4" Length (Feet): 50' Box Dimensions: 4"H x 22"W x 22"L WT: 22.2 lbs UPC: 704917004327 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 11/32"-25/32" Clamping Range - 10-Pack - SAE Size 6Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 6 Hose Inner Diameter: (inch) 5/16" - 3/8" Clamping Range: (inch) 11/32" – 25/32" / (mm) 13-20 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (7/8" – 1-1/4") Clamping Range - 10-Pack - SAE Size 12Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 12 Hose Inner Diameter: (inch) 5/8" – 1-1/8" Clamping Range: (inch) 7/8" – 1-1/4" / (mm) 22-32 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-1/2" - 2") Clamping Range - 10-Pack - SAE Size 24Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 24 Hose Inner Diameter: (inch) 1-5/16" - 1-3/8" Clamping Range: (inch) 1-1/2" - 2" / (mm) 38-50 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

Compact Carbon CanisterCarbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.Features: This is a single pack that contains two Compact Carbon Canisters Brackets OEM Installed Low permeation shell reduces overall system emissions Can be mounted in any orientation using brackets provided EPA / CARB Certified Fits a 5/8" vent hose Specifications:  Trailerable Vessel Capacity (EPA Rating): 70 Gallon Non-Trailerable Vessel Capacity (EPA Rating): 110 Gallon Trailerable Vessel Capacity (CARB Rating): 56 Gallon Non-Trailerable Vessel Capacity (CARB Rating): 110 Gallon  *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

4" ID 45-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.Features: Four stainless steel clamps are included This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards) Black high-temp EDPM rubber  Construction: Color: Black Reinforcement: Reinforcing ribs on 6” I.D. and above Temperature Range: up to 250°F (121°C) Specifications: Inner Diameter: (inch) 4” / (mm) 101.6 Outer Diamter: (inch) 4.5" / (mm) 114.3 A: (inch) 1.5” / (mm) 38.1 B: (inch) 1.5” / (mm) 38.1  C: (inch) 5.5” / (mm) 139.7 W: (inch) 0.25” / (mm) 6.35 Elbow Degree: 45 degrees Weight: (Lb/Ea) 0.95 / (Kg/Ea) 0.43 Specifications: ID Diameter (inches): 4" Box Dimensions: 8"H x 8"W x 9"L WT: 2.1 lbs UPC: 704917000459 Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 8.62"-9.19"  RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 8" Hose Outer Diameter (inch): 8.62" to 9.19" Quick Guide (pdf)

Read more less

Flush Port Quick Connect for Mercury OutboardsThe Flush Port Quick Connect for Mercury outboards makes flushing your Mercury outboards easier, faster, and more securely. Designed to replace factory flush ports, this kit installs in minutes and gives you a permanent, leak-free connection built to withstand the toughest marine environments.Crafted from durable, corrosion-resistant materials, including 316 stainless steel and high-grade polymers, the Flush Port Quick Connect is built for life around saltwater. With the included 90-degree elbow fitting, you’ll avoid hose kinks and ensure maximum water flow for a more complete, effective flush every time.Whether you're flushing with your Flushmaster system or a standard water hose, this upgrade means no more stripped threads, no more frustration, and no more excuses — just a faster, easier way to protect your engine and extend its life.NOTE: The opening at the top of the Mercury Quick Connect cap serves as an indicator of check valve failure and is required by the OEMFeatures: Replaces OEM Flush Port Marine-Grade & 316 SS Construction Leak-Free Performance Easy To Install Hassle-Free and Saves Time What's Included? (1) Mercury Male Quick Connect (1) Female Hose Quick Connect (Black) (1) 90-degree Elbow (goes inside the cowling to ensure no kinks are in the Mercury flush hose; use if necessary) (1) Wrench for Tightening (1) Stainless Steel Hose Clamp Product Installation: Remove the OEM Mercury flush port plug. Unscrew the Mercury OEM plug from the 3/4" female hose outlet. Remove the lanyard from the engine hose. Thread your new Flushmaster Flush Port Quick Connect to the flush port. Reinstall the Flushmaster Flush Port Quick Connect into the engine cowling. Give it a 1/4" turn clockwise to lock it in place. Helpful Tip: Remove the cowling and inspect the flush hose for any kinks. If a kink exists, replace the Mercury 3/4" female hose outlet with the provided elbow. Orient the elbow inside the cowling to ensure no kinks are in the Mercury flush hose. (To help insert the 90-degree elbow, lube the barb or use a heat gun on the flush hose.)WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

1-1/4" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller i.d.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Sold by the foot Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting, and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Specifications: Inner Diameter: (inch) 1-1/4" / (mm) 31.8 Outer Diameter: (inch) 1.40" / (mm) 32 Working Pressure: (Psi) 70 / (bar) 4.8 Bend Radius: (inch) 1.5" / (mm) 38 Weight: (Lb./50 ft.) 35 / (Kg/m) 15.7 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1-1/4" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 1"L WT: 0.64 lbs Quick Guide (pdf)

Read more less

Current Model Outboard Solenoid with Flat Isolated BaseThe outboard solenoid will fit the current model Mercruiser and Mercury. Isolated base, 12 Volt.Replaces:MERCURY 89-850189MERCURY 89-850189TMERCURY 89-91975MERCURY 89-96054MERCURY 89-96054T*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 4"L WT: 0.37 lbs UPC: 693006001616

Read more less

Premium Replacement Yamaha Outboard Starter - 13 ToothThis outboard starter will fit Yamaha 2004-Up 150 HP, 4-Stroke, 2005-Up 250 HP, 4-Stroke, 2006-Up 225 HP, and 4-Stroke.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: HITACHI Outboard Starter S114-867 HITACHI Outboard Starter S114-867A YAMAHA Outboard Starter 63P-81800-00 YAMAHA Outboard Starter 6BR-81800-00 YAMAHA Outboard Starter 6BR-81800-01 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Mercury/Mariner Outboard Starter - 8 ToothThe outboard starter will fit Mercury/Mariner, 100-125 HP Inline 4-cyl; 80 HP Jet, 8-tooth drive gear.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:MERCURY 50-66015-TMERCURY 50-66015-1MERCURY 50-66015-3MERCURY 50-893892TThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Premium Replacement Alternator with Single Groove Pulley - 12V, 55APremium replacement alternator that will fit late model Mercruiser, 12 Volt, 55 Amp, Internal regulator. 2-inch mounting foot. Single groove pulley included.Features: All alternators are engineered for performance and reliability All alternators are engineered and manufactured with precision and quality All alternators must meet or exceed OEM performance before being boxed Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:MARINE POWER Alternator 1210-000MERCURY Alternator 12449MERCURY Alternator 78403A1MERCURY Alternator 78403A2MERCURY Alternator 817119A1MERCURY Alternator 817119A4MERCURY Alternator 92497A3MERCURY Alternator 98555MERCURY Alternator 98555A1SIERRA Alternator 18-5957SIERRA Alternator 18-5966This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 55A Voltage: 12v Box Dimensions: 7"H x 8"W x 8"L WT: 9.75 lbs UPC: 693006001258 Quick Guide (pdf)

Read more less

Premium Replacement Alternator with Multi-Groove Pulley - 12V 55AReplacement alternator that will fit late model Mercruiser, 12 Volt, 55 Amp, Internal regulator 2-inch mounting foot, multi-groove serpentine pulley included.Features: All alternators are engineered for performance and reliability All alternators are engineered and manufactured with precision and quality All alternators must meet or exceed OEM performance before being boxed Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:MERCURY Alternator 807652TSIERRA Alternator 18-5967This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 55A Voltage: 12v Box Dimensions: 8"H x 8"W x 9"L WT: 11.3 lbs UPC: 693006001265 Quick Guide (pdf)

Read more less

Temperature Sensor for Volvo Penta EnginesTemperature Sensor for Volvo Penta Engines.Engine Brand:Volvo PentaFitment:Volvo Penta Engines Brochure (pdf)

Read more less

Ignition Module for Mercruiser Engines: 2001 & Newer MCM/MIE 4.3L, 5.0L, 5.7L & 6.2L MPI Engines with ECM 555Ignition Module for Mercruiser Engines: 2001 and Newer MCM/MIE 4.3L, 5.0L, 5.7L, and 6.2L MPI Engines With ECM 555.Engine Brand:Mercury / MercruiserFitment:2001 & Newer MCM/MIE 4.3L, 5.0L, 5.7L & 6.2L MPI Engines with ECM 555 (S/N 0M300000 & Up). Brochure (pdf)

Read more less