Top Mount Inboard Starter with Gear Reduction - Counter Clockwise RotationARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:DELCO Inboard Starter 8000186DELCO Inboard Starter 9000888MARINE POWER Inboard Starter 475118MARINE POWER Inboard Starter 0170-000MERCURY Inboard Starter 50-808011A4MERCURY Inboard Starter 50-808011A05PLEASURECRAFT Inboard Starter RA122009SIERRA Inboard Starter 18-5603VOLVO Inboard Starter 3862985VOLVO Inboard Starter 855334WESTERBEKE Inboard Starter 21129980This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Replacement Outboard Tilt Trim Motor - Yamaha, 2-Wire, 3 Bolt, Flat Blade ShaftReplacement outboard tilt trim motor that will fit Yamaha 2002-2009 200, 225, 250 HP 4 Stroke, 2002-2009 200-300 HP 2 Stroke, 2-wire connection, 3-bolt mount, Includes O-ring, Ring Terminal Ends.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:MERCURY Tilt Trim Motor 888645T1YAMAHA Tilt Trim Motor 60V-43880-00YAMAHA Tilt Trim Motor 69J-43880-00YAMAHA Tilt Trim Motor 69J-43880-01SIERRA Tilt Trim Motor 18-6798This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Fogging Oil - 12ozSTA- BIL Fogging Oil is an aerosol propelled oil treatment to protect internal engine components during storage. This fogging oil can be sprayed to coat internal engine components and prevent corrosion. Formulated to displace moisture from metal to protect engine, this product also lubricates the cylinder’s walls, pistons and rings to prevent damage (scuffing) during start-up after prolonged engine storage. It is used in all two and four cycle gasoline engines. The STA-BIL Fogging Oil comes in a convenient 12 ounce aerosol can with nozzle straw to direct oil in tight passages or through spark plug holes in head and cylinder.USAGE DIRECTIONS: Start engine and remove air filter. Spray fogging oil into air intakes of running engine. Shut engine off after 10 seconds. Remove spark plugs. Attach extension tube and spray fogging oil into each cylinder for 3 seconds. Replace spark plugs. Features: STA-BIL Fogging oil coats internal engine components to prevent corrosion Displaces moisture from metal to protect engine Lubricates cylinders to prevent cylinder damage (scuffing) at start up For all 2-cycle and 4-cycle gasoline engines, including outboard, marine, small internal combustion & automotive engines Made in the U.S.A. Specifications: Type: Engine & Fuel Box Dimensions: 3"H x 3"W x 8"L WT: 0.95 lbs UPC: 073905220019

Read more less

Zeus 24V 4kW Low Turn On (LTO) 1"-2" Single Foot Alternator with Isolated GroundThe ARCO Zeus 24v 4kW LTO alternator turns on at lower RPMs, runs cooler, and provides more power than older designs that are larger and heavier. This alternator continuously generates over 1.4kW (51 Amps) at just under 1,500 RPM and almost 2.4kW (87 Amps) at 2,000 Alternator RPM. Put in real-world terms, a marine diesel engine idling at 750 RPM with a 2:1 pulley ratio is generating over 1.5kW (55 Amps), and a Mercedes Sprinter at 750 RPM with a 3.21:1 ratio is generating over 2.5kW (91 Amps)!The ARCO Zeus 24v 4kW alternator turns on at lower RPMs, runs cooler, and provides more power than older designs that are larger and heavier. The newest generation of 24V performance has arrived.Competitor’s 24V alternators utilize a 12V rotor and field current which is less efficient and limits output at all RPMs. ARCO utilizes a native 24V rotor and field current. This results in our 24V alternator running cooler than competitor’s 24V alternators, having a direct impact onthe  alternator lifespan.Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance: Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at cruising speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote, keeping the high amp alternator cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Proudly made in the U.S.A. Technical Specifications: Voltage - 24v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 15.89lbs/7.2kg Regulation - External Only Finish - (Black) E-coating Cut-In RPM - 1,072 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) at 27.5v - 144 Amps - 3,960 Watts – 5.7Kw PTO Sustained Cruising Output (Hot, 6,000 RPM) at 27.5v - 130 Amps - 3,575 Watts – 5.1Kw PTO Sustained Idle Output (Hot, 3,000 RPM) at 27.5v - 108 Amps - 2,970 Watts – 4.2kW PTO Max Continuous Operating Temperature - 100°C / 212°F Mounting Application:Replaces most domestic styles using a single 1” or 2” mounting foot (e.g., Motorola, Prestolite). Quick Guide (pdf)Brochure (pdf)

Read more less

Alternator 250 AMP Kit 12V 3.15" Dual Foot Saddle K6 Pulley Regulator & Temp SensorKit Includes: XT-CR-250-K6 Alternator, MC-618 Regulator, Temperature Sensors & Mounting HardwareXT Series Alternator: 250A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Case Ground4" J-180-Style Mounting;  Typical for Caterpillar, Cummins, Detroit Diesel & John Deere EnginesThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 250A Voltage: 12v Box Dimensions: 11"H x 11"W x 14"L WT: 21 lbs UPC: 676205503518 Brochure (pdf)

Read more less

Outboard Flushing System - 2 Outlet with Two 9' Hose KitsThe Flushmaster is a portable, marine-grade device designed to automate the flushing process for up to four outboard motors. Powered by (3) AA batteries, it ensures thorough engine cleaning by flushing each motor sequentially before automatically shutting off. With its IP67 waterproof certification, the Flushmaster is built to last, offering a convenient and time-saving solution for outboard maintenance. Select the perfect hose length for your setup and experience hassle-free engine care with just the push of a button.The Flushmaster Outboard Flushing System is a marine-grade, portable device that simplifies the process of flushing single, dual, triple, and even quad outboard motors. Powered by (3) AA batteries, the Flushmaster offers effortless engine maintenance while saving time and water. With just the push of a button, your motors are flushed one at a time, ensuring thorough cleaning and optimal engine performance. Once the flushing is complete, the device automatically shuts off and blocks the water flow, leaving you free to enjoy your day without further attention.Portable - Use it anywhere you have a freshwater supply: Water Spigot Garden Hose PVC Plumbing Choose the appropriate hose length based on your setup and application.With its IP67 Waterproof Certification, the Flushmaster is built to withstand harsh marine conditions, ensuring reliable performance season after season. Say goodbye to the hassle of traditional flushing methods and embrace the simplicity of Flushmaster for a smoother boating experience.What's Included? Flushmaster Device (3) AA Batteries Outlet Hoses Hose Clamps Screwdriver Instructions Manual and Warranty Product Installation: Install the included (3) AA batteries Install the outlet hose(s) to the Flushmaster device Connect the Flushmaster device to a water source Attach the outlet hose(s) to your boat motor(s) Press START to begin the automated flushing process Product Compatibility:The Flushmaster is compatible with four-stroke outboards and flush ports. Ensure you select the optimal hose length to accommodate your application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Universal Brass Fuel Hose Fitting - 1/4" NPT x 5/16" Barb This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.Features: Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels Material Construction: Brass Male thread, hose barb (inch) Male 1/4" NPT x 5/16" Barb  *Use thread sealant on all threads Quick Guide (pdf)

Read more less

Honda Tank Fitting - 1/4" NPT Thread - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.Features: Honda male fitting Designed for 90HP+ (Large Bore)  Material Construction: Chrome-plated Brass *Specifically mates to Attwood part number: 8902-6 Quick Guide (pdf)

Read more less

500A/50mV ShuntShunt 500 Amp 50 mV - 500A/50mV

Read more less

Original Equipment Quality Replacement Tilt Trim Motor for Mercury/Mariner Outboards with Design II 3 RAMReplacement outboard tilt trim motor that will fit Mercury/Mariner outboards w/Design II 3 ram, three-wire trim units, Hollow-hex shaft W/AFT FILL RESERVOIR, 3-wire connection, 2-bolt mount, Shaft adaptor, and O-ring included, Ring Terminal Ends. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: MERCURY Tilt Trim Motor 811628 MERCURY Tilt Trim Motor 828708A1 MERCURY Tilt Trim Motor 878265A6 SIERRA Tilt Trim Motor 18-6774 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Original Equipment Quality Replacement Outboard Starter for BRP-OMC, 90-115 HPThis outboard starter will fit BRP-OMC, 90-115 HP, 1997-UP, 60deg. V4, 1998-2000 80 HP, 1998-2000 100 HP ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: BRP-OMC Outboard Starter 584980 BRP-OMC Outboard Starter 586284 SIERRA Outboard Starter 18-5632 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

High-Performance Inboard Starter with 14" Flywheel & Gear ReductionThe inboard starter that will fit Mercruiser, Volvo Penta, OMC, Marine Power, and others. Will replace 9 tooth drive OEM versions 3.0 - 8.1L with 14" flywheel. Anodized casting, nickel-plated brush holder (OEM mounting bolts included).ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:BRP/ OMC Inboard Starter 984456BRP/ OMC Inboard Starter 986505BRP/ OMC Inboard Starter 3850525BRP/ OMC Inboard Starter 3853982BRP/ OMC Inboard Starter 3854751BRP/ OMC Inboard Starter 3855177BRP/ OMC Inboard Starter 3857747BRP/ OMC Inboard Starter 3860566DELCO Inboard Starter 9000735DELCO Inboard Starter 9000762DELCO Inboard Starter 9000768DELCO Inboard Starter 9000789DELCO Inboard Starter 9000819DELCO Inboard Starter 9000821DELCO Inboard Starter 9000839DELCO Inboard Starter 9000840DELCO Inboard Starter 9000849DELCO Inboard Starter 9000885DELCO Inboard Starter 9000940DELCO Inboard Starter 9000884 (Hi-Perf)MARINE POWER Inboard Starter 0174-000MERCURY Inboard Starter 50-12121A2MERCURY Inboard Starter 50-12177A2MERCURY Inboard Starter 50-806964A2MERCURY Inboard Starter 50-806964A3MERCURY Inboard Starter 50-806964A4MERCURY Inboard Starter 50-812428A3MERCURY Inboard Starter 50-812604A2MERCURY Inboard Starter 50-822330A2MERCURY Inboard Starter 50-864340A2MERCURY Inboard Starter 50-8M8021116MERCURY Inboard Starter 50-99418A2SIERRA Inboard Starter 18-5905SIERRA Inboard Starter 18-5910SIERRA Inboard Starter 18-5913SIERRA Inboard Starter 18-6946SIERRA Inboard Starter 18-6275-1SIERRA Inboard Starter 18-5913-1VOLVO Inboard Starter 3587625VOLVO Inboard Starter 3857747VOLVO Inboard Starter 3860566VOLVO Inboard Starter 3860764VOLVO Inboard Starter 3885317VOLVO Inboard Starter 3850525-1VOLVO Inboard Starter 3853982-1VOLVO Inboard Starter 3854751-9VOLVO Inboard Starter 3855177-6VOLVO Inboard Starter 3856004-1This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Mercury/Mariner Outboard Starter - 8 ToothThe outboard starter will fit Mercury /Marine, 135-200 HP V6, 105 HP Jet, and 8-tooth drive gear.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:MERCURY 50-44414MERCURY 50-44415MERCURY 50-77141MERCURY 50-79472MERCURY 50-79472-1MERCURY 50-79472T2MERCURY 50-884238TMERCURY 50-893890MERCURY 50-893893This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

8" ID Blue Silicone Molded Wet Exhaust Hump with 4 T-Bolt ClampThis silicone and rubber hump hose provides the ultimate flexible connector for marine wet exhaust systems. The hump hose offers much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.Construction: Tube & Cover: VHT blue silicone Color: Blue Reinforcement: EPDM Silicone Rubber Temperature Range: 350°F (177°C) Specifications: Inner Diameter: (inch) 8" / (mm) 203 Outer Diameter: (inch) 8.5" / (mm) 215.9 Working Pressure: (Psi) 15 / (Bar) 1 *Burst Pressure is 4 x Working Pressure Specifications: ID Diameter (inches): 8" Box Dimensions: 9"H x 10"W x 15"L WT: 3.1 lbs UPC: 704917002569 Quick Guide (pdf)

Read more less

Johnson/Evinrude/OMC (Outboard Marine Corporation) Male Tank Fitting - 1/4" NPTThis Attwood male tank fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The threaded fitting has a 1/4" male NPT thread and uses thread sealant on all threads. Clamps are not included.Features: Johnson, Evinrude, and OMC fitting Quick-connect ¼-inch male thread makes installation easy Solid machined brass for dependable performance, peace of mind *Specifically mates to Attwood part numbers: 8889LP6 & 88FHE516-6 Quick Guide (pdf)

Read more less

Fuel Tank Strap Set - 48 (inches) Long for 3-6 Gallon TanksThis Attwood Fuel Tank Strap Set contains everything needed to secure a 3-6-gallon fuel tank in place. This kit includes a 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place.Features: Includes 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle Run the strap through footman loops, then tighten and buckle to hold the tank in place Quick Guide (pdf)

Read more less

Star-Tron Enzyme Fuel Treatment - Classic Gas Formula - Contains (4) 1 oz BottlesCures and prevents ethanol-related fuel problems while stabilizing gasoline for long-term storage. Designed for all gas engines, including boats, cars, motorcycles, lawn equipment, and generators. The enzyme technology removes gum and varnish buildup, disperses moisture, and improves combustion efficiency.Features: UNLEASH YOUR ENGINE'S FULL POTENTIAL - Star Tron Enzyme Fuel Treatment uses advanced enzyme technology to ensure all engines start easily and run smoothly, even after months of inactivity. SAY GOODBYE TO ETHANOL-RELATED PROBLEMS - Prevents and cures most ethanol-related issues, including poor performance, rough idling, and decreased fuel economy, giving you peace of mind on the road or on the water. MAXIMIZE FUEL ECONOMY - By removing and preventing gum, carbon deposits, and varnish build-up, Star Tron keeps your fuel delivery system clean, resulting in improved fuel economy. WORKS FOR ALL ENGINES AND FUEL TYPES - Whether you have a car, boat, RV, or lawn mower, Star Tron works in all engines and all fuels, making it the ideal fuel treatment and stabilizer for any vehicle. PREVENT WATER BUILD-UP - Helps prevent phase separation by dispersing water throughout fuel as submicron-sized droplets that are safely eliminated while the engine operates, keeping your engine running smoothly in humid or wet conditions. REVITALIZE OLD FUEL - Star Tron stabilizes fuel up to 2 years and can even help rejuvenate old, sub-spec fuel. REDUCE EMISSIONS & SAVE MONEY - Star Tron reduces smoke and emissions, which are a symptom of poor combustion, which wastes gas and is harmful to our health & planet. Try Star Tron Enzyme Fuel Treatment today and experience the difference. GET MORE BANG FOR YOUR BUCK - At just one fluid ounce per six gallons of fuel, Star Tron Fuel Treatment is an incredibly cost-effective solution for optimizing engine performance and efficiency. TOP SELLING FUEL ADDITIVE: Star Tron is the top-selling and highest-rated gasoline treatment for the prevention of ethanol fuel problems, trusted by thousands of satisfied customers to enhance the performance of all types of engines. Directions:Always add Star Tron® just before each fuel fill up. Remove cap and pour the prescribed amount into tank. Overdosing is not harmful.

Read more less

Star-Tron Enzyme Fuel Treatment - 16 ozEnsures easy starts and smooth running while curing and preventing ethanol fuel problems. Designed for all gas engines, including boats, cars, motorcycles, ATVs, and lawn equipment. The enzyme technology removes deposits, disperses water, and improves fuel economy while reducing emissions.Features: UNLEASH YOUR ENGINE'S FULL POTENTIAL - Star Tron Enzyme Fuel Treatment uses advanced enzyme technology to ensure all engines start easily and run smoothly, even after months of inactivity. SAY GOODBYE TO ETHANOL-RELATED PROBLEMS - Prevents and cures most ethanol-related issues, including poor performance, rough idling, and decreased fuel economy, giving you peace of mind on the road or on the water. MAXIMIZE FUEL ECONOMY - By removing and preventing gum, carbon deposits, and varnish build-up, Star Tron keeps your fuel delivery system clean, resulting in improved fuel economy. WORKS FOR ALL ENGINES AND FUEL TYPES - Whether you have a car, boat, RV, or lawn mower, Star Tron works in all engines and all fuels, making it the ideal fuel treatment and stabilizer for any vehicle. PREVENT WATER BUILD-UP - Helps prevent phase separation by dispersing water throughout fuel as submicron-sized droplets that are safely eliminated while the engine operates, keeping your engine running smoothly in humid or wet conditions. REVITALIZE OLD FUEL - Star Tron stabilizes fuel up to 2 years and can even help rejuvenate old, sub-spec fuel. REDUCE EMISSIONS & SAVE MONEY - Star Tron reduces smoke and emissions, which are a symptom of poor combustion, which wastes gas and is harmful to our health & planet. Try Star Tron Enzyme Fuel Treatment today and experience the difference. GET MORE BANG FOR YOUR BUCK with Star Tron! At just one fluid ounce per sixteen gallons of fuel, Star Tron Fuel Treatment Formula 930 is an incredibly cost-effective solution for optimizing engine performance and efficiency. #1 SELLING FUEL ADDITIVE: Star Tron is the top-selling and highest-rated gasoline treatment for the prevention of ethanol fuel problems, trusted by thousands of satisfied customers to enhance the performance of all types of engines. Directions:Always add Star Tron® just before each fuel fill up. Remove cap and pour the prescribed amount into tank. Overdosing is not harmful.

Read more less

Star-Tron Stabilizer + Fuel Storage & Corrosion Protection - 8 ozKeeps fuel fresh and protects internal metal surfaces from rust during storage. Designed for motorcycles, boats, lawn equipment, and classic cars. The formula combines enzyme stabilization with corrosion inhibitors to ensure reliable start-ups after extended idle periods.Features: ENHANCED FUEL STABILITY - Star Tron Stabilizer+ uses enzymes to stabilize fuel, keeping it fresh and breaking down contaminants like gum, varnish, and moisture. CORROSION PROTECTION - Our formula includes corrosion inhibitors that provide an added layer of protection to metal surfaces, fighting against internal rust. EASY TO USE - Simply add Star Tron Stabilizer+ to fuel before storing to protect against corrosion and fuel breakdown. Pour directly into the tank; no extra steps are required. VERSATILE APPLICATION - Works in all gas engines. Ideal for motorcycles, boats, lawn equipment, classic cars, and more. Not recommended for diesel fuel. PREVENTS BUILDUP - Effectively prevents moisture buildup, gum, varnish, and carbon deposits, ensuring your engine runs smoothly. PREMIUM PROTECTION - Protects internal components with premium corrosion inhibitors, extending the life of your engine. LONG-LASTING QUALITY - Ensures fuel quality up to two years for all-weather, any-season storage. EFFICIENT TREATMENT - One ounce treats 5 gallons, making it a cost-effective solution for fuel storage. SUITABLE FOR ALL GASOLINE - Can be used with all ethanol blends and non-ethanol gasoline. TRUSTED BRAND - Choose Star Tron for reliable, high-quality fuel storage and corrosion protection. Directions:Add Star Tron Stabilizer+ to fuel prior to storing to protect against corrosion and fuel breakdown. Remove the cap and pour directly into the tank.WORKS IN ALL GAS ENGINES. Not recommended for diesel fuel.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Star-Tron Enzyme Fuel Treatment - Small Engine Formula - 8 ozCures and prevents ethanol-related fuel problems while stabilizing gasoline for long-term storage. Designed for all gas engines, including boats, cars, motorcycles, lawn equipment, and generators. The enzyme technology removes gum and varnish buildup, disperses moisture, and improves combustion efficiency.Features: Helps cure & prevent fuel problems Stabilizes gasoline Removes gum, carbon & varnish Prevents phase separation Improves fuel economy Rejuvenates stale fuel Directions:Always add Star Tron just before each fuel fill up. Remove cap and pour the prescribed amount into tank. Overdosing is not harmful.

Read more less

Star-Tron Quick Fix Fuel System & Injector Cleaner - 4 ozRestores performance to rough-running engines and resolves start-up issues without costly repairs. Designed for gasoline engines in vehicles and equipment suffering from carbon buildup. The enzyme and P.E.A. detergent formula dissolves deposits from injectors and valves while removing moisture from the fuel system.Features: ADVANCED ENGINE RESCUE: Star Tron Quick Fix Engine Rescue combines a proprietary enzyme blend with P.E.A. engine detergent technology, making it the most advanced additive for restoring your vehicle and equipment engines START-UP & ROUGH-RUNNING ISSUES: Add Quick Fix to your vehicle's gas tank to help fix start-up or rough-running engine issues, providing a quick and effective solution CLEANS INJECTORS & VALVES: Utilizing the power of POLYETHERAMINE (P.E.A.), the most potent deposit-control detergent available, it dissolves and removes carbon deposits, gum, varnish, and other impurities that degrade engine performance REMOVES WATER & MOISTURE: The Star Tron enzyme formula in Quick Fix helps remove water and moisture build-up from the fuel system without the use of alcohol, ensuring optimal engine operation CONCENTRATED FORMULA - Concentrated formula that provides maximum cleaning power. ELIMINATES RUST AND SLUDGE - Perfect as a gas tank cleaner for rust and sludge. CONCENTRATED FORMULA - Concentrated formula that provides maximum cleaning power. ELIMINATES RUST AND SLUDGE - Perfect as a gas tank cleaner for rust and sludge. Directions: Using Star Tron Quick Fix is simple. Just add 1 fluid ounce for every 5 gallons of fuel being treated directly into the gas tank. For best results, it is recommended to use Quick Fix every 4 to 5 tanks or as often as needed.For maintaining peak performance levels, it is also recommended to use the original Star Tron Enzyme Fuel Treatment at every fill-up. This will help keep your engines operating at their best, ensuring optimal fuel efficiency and performance.Trust Star Tron Quick Fix Engine Rescue to restore and improve the performance of all gas engines. Whether it's your car, boat, truck, or RV, Quick Fix delivers the results you need to get back on the road or water with confidence.

Read more less

Star-Tron Enzyme Fuel Treatment - 8 ozEnsures easy starts and smooth running while curing and preventing ethanol fuel problems. Designed for all gas engines, including boats, cars, motorcycles, ATVs, and lawn equipment. The enzyme technology removes deposits, disperses water, and improves fuel economy while reducing emissions.Features: UNLEASH YOUR ENGINE'S FULL POTENTIAL - Star Tron Enzyme Fuel Treatment uses advanced enzyme technology to ensure all engines start easily and run smoothly, even after months of inactivity. SAY GOODBYE TO ETHANOL-RELATED PROBLEMS - Prevents and cures most ethanol-related issues, including poor performance, rough idling, and decreased fuel economy, giving you peace of mind on the road or on the water. MAXIMIZE FUEL ECONOMY - By removing and preventing gum, carbon deposits, and varnish build-up, Star Tron keeps your fuel delivery system clean, resulting in improved fuel economy. WORKS FOR ALL ENGINES AND FUEL TYPES - Whether you have a car, boat, RV, or lawn mower, Star Tron works in all engines and all fuels, making it the ideal fuel treatment and stabilizer for any vehicle. PREVENT WATER BUILD-UP - Helps prevent phase separation by dispersing water throughout fuel as submicron-sized droplets that are safely eliminated while the engine operates, keeping your engine running smoothly in humid or wet conditions. REVITALIZE OLD FUEL - Star Tron stabilizes fuel up to 2 years and can even help rejuvenate old, sub-spec fuel. REDUCE EMISSIONS & SAVE MONEY - Star Tron reduces smoke and emissions, which are a symptom of poor combustion, which wastes gas and is harmful to our health & planet. Try Star Tron Enzyme Fuel Treatment today and experience the difference. GET MORE BANG FOR YOUR BUCK with Star Tron! At just one fluid ounce per sixteen gallons of fuel, Star Tron Fuel Treatment Formula 930 is an incredibly cost-effective solution for optimizing engine performance and efficiency. #1 SELLING FUEL ADDITIVE: Star Tron is the top-selling and highest-rated gasoline treatment for the prevention of ethanol fuel problems, trusted by thousands of satisfied customers to enhance the performance of all types of engines. Directions:Always add Star Tron® just before each fuel fill up. Remove cap and pour the prescribed amount into tank. Overdosing is not harmful.

Read more less

Star-Tron Diesel Enzyme Fuel Treatment - 16 ozEnsures easy starts and smooth running while breaking down water and sludge for safe combustion. Designed for all diesel engines requiring fuel system cleaning and stabilization. The enzyme technology removes gum and varnish deposits while stabilizing fuel for up to two years.Features: ENHANCED FUEL ECONOMY: Helps boost fuel efficiency by cleaning the fuel delivery system and ensuring uniform combustion WATER DISPERSION: Transforms water into submicron-sized droplets, allowing safe elimination during engine operation DEPENDABLE & TRUSTED – Overdosing poses no harm, and the formula disperses moisture, reducing emissions, including particulate smoke ENGINE PERFORMANCE: Facilitates easy engine starts and smooth running, reducing carbon build-up from burners, injectors, and exhaust components FUEL STABILIZATION: Preserves diesel fuel quality for up to two years, preventing gum and solid formation that can clog injectors VERSATILE APPLICATION: Suitable for everyday use, seasonal storage, and can even rejuvenate old, sub-spec fuel IDEAL FOR VARIOUS SETTINGS - Perfect for use in boats, cars, homes, and RVs. Keep your carpets clean wherever you are! SAFE & EFFECTIVE - Formulated to be safe for all carpets, providing effective cleaning without damaging the material. Directions:Add 1 fluid ounce for every 4 gallons of gas or diesel fuel. Allow to sit in the tank for a minimum of 24 hours before using rejuvenated fuel. Note: Keep spare fuel filters on hand. Star Tron Tank Cleaner will disperse hardened deposits and can load or clog filters. After two treatments, the fuel tank should be cleaned of all deposits and fuel filters will no longer load or clog up. After using this product to thoroughly clean fuel tanks, maintain the system with Star Tron Enzyme Fuel Treatment to prevent future carbon buildup and gumming.

Read more less

3" ID 90-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.Features: Four stainless steel clamps are included This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards) Black high-temp EDPM rubber  Construction: Color: Black Reinforcement: Reinforcing ribs on 6” I.D. and above Temperature Range: up to 250°F (121°C) Specifications: Inner Diameter: (inch) 3” / (mm) 76.2 A: (inch) 5.25" / (mm) 133 B: (inch) 5.25” / (mm) 133 C: (inch) 1.75” / (mm) 44.4 D: (inch) 1.75” / (mm) 44.4 R: (inch) 2” / (mm) 50.8 W: (inch) 0.25” / (mm) 6.4 Elbow Degree: 90 degrees Specifications: ID Diameter (inches): 3" Box Dimensions: 4"H x 4"W x 9"L WT: 1.6 lbs UPC: 704917000404 Quick Guide (pdf)

Read more less

5/8" x 50' Boxed Type A2 Fuel & Vent Line Hose - BlackTrident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.Features: Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Application: Fuel Hose for vent and diesel distribution  For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC)  Length: 50 ft. (15 m) Boxed Specifications: Inner Diameter: (inch) 5/8" / (mm) 15.9 Outer Diameter: (inch) 0.960 / (mm) 24.4 Burst Pressure: (psi) 200 / (mpa) 1.38 Working Pressure: (psi) 50 / (mpa) 0.34 Bend Radius: (inch) 3" / (mm) 76.2 Weight: (lb/100 ft.) 25.84 / (kg/m) 11.72 *The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2 Specifications: ID Diameter (inches): 5/8" Length (Feet): 50' Box Dimensions: 5"H x 18"W x 18"L WT: 13.5 lbs UPC: 704917009001 Quick Guide (pdf)

Read more less

Zeus 24V 4kW Low Turn On (LTO) 3.15 Alternator with Isolated Ground (Common Rail)The ARCO Zeus 24v 4kW LTO alternator turns on at lower RPMs, runs cooler, and provides more power than older designs that are larger and heavier. This alternator continuously generates over 1.4kW (51 Amps) at just under 1,500 RPM and almost 2.4kW (87 Amps) at 2,000 Alternator RPM. Put in real-world terms, a marine diesel engine idling at 750 RPM with a 2:1 pulley ratio is generating over 1.5kW (55 Amps), and a Mercedes Sprinter at 750 RPM with a 3.21:1 ratio is generating over 2.5kW (91 Amps)!The ARCO Zeus 24v 4kW alternator turns on at lower RPMs, runs cooler, and provides more power than older designs that are larger and heavier. The newest generation of 24V performance has arrived.Competitor’s 24V alternators utilize a 12V rotor and field current which is less efficient and limits output at all RPMs. ARCO utilizes a native 24V rotor and field current. This results in our 24V alternator running cooler than competitor’s 24V alternators, having a direct impact on the alternator lifespan.Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance: Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at cruising speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote, keeping the high amp alternator cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Proudly made in the U.S.A. Technical Specifications: Voltage - 24v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 15.89lbs/7.2kg Regulation - External Only Finish - (Black) E-coating Cut-In RPM - 1,072 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) at 27.5v - 144 Amps - 3,960 Watts – 5.7Kw PTO Sustained Cruising Output (Hot, 6,000 RPM) at 27.5v - 130 Amps - 3,575 Watts – 5.1Kw PTO Sustained Idle Output (Hot, 3,000 RPM) at 27.5v - 108 Amps - 2,970 Watts – 4.2kW PTO Max Continuous Operating Temperature - 100°C / 212°F Mounting Application:Must Be used on Yanmar Common Rail Engines introduced after 2013 (JH-CR, 3JH40, 4JH45, 4JH57, 4JH80, 4JH110). Quick Guide (pdf)Brochure (pdf)

Read more less

Johnson/Evinrude Outboard Starter - Small 10 ToothThe outboard starter will fit BRP-OMC, 85-140 HP V4, and a small 10-tooth drive gear.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:BRP-OMC 385529BRP-OMC 389954BRP-OMC 585051BRP-OMC 585057BRP-OMC 586283This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Alternator 1-2" Single Foot Dual V Pulley Regulator & Temp Sensor - 170A Kit - 12VBalmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high-reliability bearings, robust rectifier diodes, and improved heat-sinking capabilities on all our alternators to ensure improved system reliability combined with increased charging power.Features: 1-2" Single Foot Dual V Pulley Regulator & Temp Sensor 170A Kit 12V This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage: 12v Amperage: 170A Box Dimensions: 11"H x 11"W x 14"L WT: 18 lbs UPC: 676205500821 Brochure (pdf)

Read more less

Original Equipment Quality Replacement Mercury Power Tilt Trim Assembly - 30HP-60HPReplacement outboard tilt trim assembly that will fit Yamaha 225HP-250HP, 1993-2003.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: MERCURY Power Trim Assembly 8M0055006 MERCURY Power Trim Assembly 893518T01 MERCURY Power Trim Assembly 830150T10 MERCURY Power Trim Assembly 830150T6 MERCURY Power Trim Assembly 830150T4 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Original Equipment Quality Replacement Tilt Trim Motor for Late Model Volvo Penta with Oildyne Pump - 2 WireReplacement tilt trim motor that will fit 6227, Late model Volvo Penta, w/Oildyne pump, 2-wire connection. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: VOLVO Tilt Trim Motor 3151278 VOLVO Tilt Trim Motor 3858071 VOLVO Tilt Trim Motor 854525-3 SIERRA Tilt Trim Motor 18-6805 SIERRA Tilt Trim Motor 18-6817 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Original Equipment Quality Replacement Tilt Trim Motor - 2 Wire & 3-Bolt MountReplacement outboard tilt trim motor that will fit Yamaha 2001-2004 50 HP 4 Stroke, 2002-2004 60 HP 4 Stroke, 2001-2006 40 HP 2 Stroke (TLR), 2003-2009 50 HP 2 Stroke (TLR).ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: YAMAHA Tilt Trim Motor CS3-43880-00 YAMAHA Tilt Trim Motor 62Y-43880-01 YAMAHA Tilt Trim Motor 62Y-43880-02 YAMAHA Tilt Trim Motor 69W-43880-00 YAMAHA Tilt Trim Motor 69W-43880-01 SIERRA Tilt Trim Motor 18-6811 SIERRA Tilt Trim Motor 18-18409 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Premium Replacement Alternator with Single-Groove Pulley - 12V, 70AReplacement alternator that will fit Mercruiser 3.0L, 1999-Up, 12 Volt, 70 AMP, Internal Fan, Single groove pulley included. Features: All alternators are engineered for performance and reliability All alternators are engineered and manufactured with precision and quality All alternators must meet or exceed OEM performance before being boxed Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: DELCO Alternator 19020600 DELCO Alternator 19020604 MERCURY Alternator 862030T MERCURY Alternator 862030T01 SIERRA Alternator 18-5983 PROTORQUE Alternator PH300-0033 PROTORQUE Alternator PH300-0034 MPPARTS Alternator ADR0317 MPPARTS Alternator ADR0299 QUICKSILVER Alternator 862030T01 QUICKSILVER Alternator 862031T This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Johnson/Evinrude Outboard Starter - 10 ToothThe outboard starter will fit BRP-OMC, V6, V8 loop, 115-300 HP E-TEC, and 10-tooth drive gear.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:BRP-OMC 391511BRP-OMC 396235BRP-OMC 397023BRP-OMC 584799BRP-OMC 586289BRP-OMC 586411BRP-OMC 586731BRP-OMC 586890BRP-OMC 586897BRP-OMC 586957This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Pulley Kit, Yanmar 4JH4-HTE-TE-DTEThe AltMount® Serpentine Pulley Conversion Kit provides an easily installed solution to provide greater load transfer and reduce engine noise and vibration. While the installation process for this kit is moderately simple, Balmar strongly recommends reading and following the installation instructions closely when installing the kit—this AltMount® Serpentine Pulley Conversion Kit for Yanmar diesel engines.Yanmar Engines Covered: 4JH4-HTE-TE, -DTEKit Includes:  Three Ten-Groove (J10) Pulleys Two J10 46″ circumference serpentine belts (one spare) and mounting hardware Note: If users specify an AT-200A Alternator, a longer belt length may be required. Call Balmar Technical Support @ +1 (360) 435-6100 x3This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

Read more less

Belt Buddy with Universal Offset Adjustment Arm (UAA2)Belt Buddy Kit; Includes the Universal Adjustment Arm (UAA2) with a 1/2" offset for mounting applications which require an offset to the alternator and Belt Buddy Mechanism (BB).To utilize only the adjustment mechanism with an existing adjustment arm, purchase part number BBU.Caution:  This approach sacrifices some "travel" in the existing adjustment arm so the BBU mechanism can be anchored to the arm.  Make certain your alternator mounting does not need this travel before purchasing the BBU.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Alternator 120 Amp 12V 1-2" Single Foot Single K6 Pulley with Isolated GroundingAlternator, 621 Series, 120A, 12V, Spindle Mount (Single Foot), 1-2in, K6 Serpentine Pulley, Isolated Ground 1″ Motorola-Style Mounting;  Typical for Westerbeke, Lehman, Hino & Pathfinder Engines 2″ Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 120A Voltage: 12v Box Dimensions: 9"H x 10"W x 10"L WT: 13.35 lbs UPC: 676205750813 Brochure (pdf)

Read more less

Rectangular Motor FlushMolded PVC/Painted Steel Outboard Rectangular Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine’s service life. Easy-to-use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an outboard engine out of the water. Features rectangular cups for use with larger outboards.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Original Equipment Quality Replacement Tilt Trim Motor - 2 Wire & 4-Bolt MountReplacement outboard tilt trim motor that will fit Evinrude ETEC 2005-2009 70-90 HP, 2007-2009 115 HP, 2009- 130 HP. Includes TAK247 mounting kit.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: BRP-OMC 5005817 BRP-OMC 5005838 BRP-OMC 5006319 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 4.37"-4.94" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 4" Hose Outer Diameter (inch): 4.37" to 4.94" Quick Guide (pdf)

Read more less

Zeus 24V 4kW Low Turn On (LTO) Vortec Alternator with Isolated GroundThe ARCO Zeus 24v 4kW LTO alternator turns on at lower RPMs, runs cooler, and provides more power than older designs that are larger and heavier. This alternator continuously generates over 1.4kW (51 Amps) at just under 1,500 RPM and almost 2.4kW (87 Amps) at 2,000 Alternator RPM. Put in real-world terms, a marine diesel engine idling at 750 RPM with a 2:1 pulley ratio is generating over 1.5kW (55 Amps), and a Mercedes Sprinter at 750 RPM with a 3.21:1 ratio is generating over 2.5kW (91 Amps)!The ARCO Zeus 24v 4kW alternator turns on at lower RPMs, runs cooler, and provides more power than older designs that are larger and heavier. The newest generation of 24V performance has arrived.Competitor’s 24V alternators utilize a 12V rotor and field current which is less efficient and limits output at all RPMs. ARCO utilizes a native 24V rotor and field current. This results in our 24V alternator running cooler than competitor’s 24V alternators, having a direct impact on the alternator lifespan.Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance: Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at cruising speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote, keeping the high amp alternator cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Proudly made in the U.S.A. Technical Specifications: Voltage - 24v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 15.89lbs/7.2kg Regulation - External Only Finish - (Black) E-coating Cut-In RPM - 1,072 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) at 27.5v - 144 Amps - 3,960 Watts – 5.7Kw PTO Sustained Cruising Output (Hot, 6,000 RPM) at 27.5v - 130 Amps - 3,575 Watts – 5.1Kw PTO Sustained Idle Output (Hot, 3,000 RPM) at 27.5v - 108 Amps - 2,970 Watts – 4.2kW PTO Max Continuous Operating Temperature - 100°C / 212°F Mounting Application:Replaces Mando-type alternators using Vortec/GM pad mounting feet. (Found on many Mercruiser and Volvo Penta 3.0GLM, 3.0GLP, 4.3GXi, 5.7GiL, 5.7GXiL Marine Engines). Quick Guide (pdf)Brochure (pdf)

Read more less

5/16" A1-15 Reel Low Permeation Fuel Line Hose - Black - Sold by the FootTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber.Features:  Sold by the foot Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Application: Marine Fuel Hose for distribution, return, vent and transfer For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC)  Length: 250 ft. reel (sold by the foot) Specifications: Inner Diameter: (inch) 5/16" / (mm) 7.92 Outer Diameter: (inch) 0.611 / (mm) 15.5 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 1.75" / (mm) 44.5 Weight: (lb/100 ft.) 13.3 / (kg/m) 0.198 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 5/16" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 0.15 lbs Quick Guide (pdf)

Read more less

Alternator 100 AMP Kit 12V 3.15" Dual Foot Saddle Dual Pulley Regulator & Temp SensorKit Includes: a 60-100-DV Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware60-100-DV Alternator: 100A, 12V, Saddle Mount (Dual Foot), 3.15in, Dual Deep Vee Pulley, Isolated GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: 60-YP-MC-100-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 100A Voltage: 12v Box Dimensions: 10"H x 11"W x 14"L WT: 10.8 lbs UPC: 676205750738 Brochure (pdf)

Read more less

60 Series Alternator - Saddle Mount(Dual Foot) - 100A - 12VFeatures: 100A 12V Saddle Mount (Dual Foot) 3.15"  Single Deep Vee Pulley Isolated Ground Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre Engines This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

Read more less

Outboard Flushing System - 2 Outlet with Two 12' Hose KitsThe Flushmaster is a portable, marine-grade device designed to automate the flushing process for up to four outboard motors. Powered by (3) AA batteries, it ensures thorough engine cleaning by flushing each motor sequentially before automatically shutting off. With its IP67 waterproof certification, the Flushmaster is built to last, offering a convenient and time-saving solution for outboard maintenance. Select the perfect hose length for your setup and experience hassle-free engine care with just the push of a button.The Flushmaster Outboard Flushing System is a marine-grade, portable device that simplifies the process of flushing single, dual, triple, and even quad outboard motors. Powered by (3) AA batteries, the Flushmaster offers effortless engine maintenance while saving time and water. With just the push of a button, your motors are flushed one at a time, ensuring thorough cleaning and optimal engine performance. Once the flushing is complete, the device automatically shuts off and blocks the water flow, leaving you free to enjoy your day without further attention.Portable - Use it anywhere you have a freshwater supply: Water Spigot Garden Hose PVC Plumbing Choose the appropriate hose length based on your setup and application.With its IP67 Waterproof Certification, the Flushmaster is built to withstand harsh marine conditions, ensuring reliable performance season after season. Say goodbye to the hassle of traditional flushing methods and embrace the simplicity of Flushmaster for a smoother boating experience.What's Included? Flushmaster Device (3) AA Batteries Outlet Hoses Hose Clamps Screwdriver Instructions Manual and Warranty Product Installation: Install the included (3) AA batteries Install the outlet hose(s) to the Flushmaster device Connect the Flushmaster device to a water source Attach the outlet hose(s) to your boat motor(s) Press START to begin the automated flushing process Product Compatibility:The Flushmaster is compatible with four-stroke outboards and flush ports. Ensure you select the optimal hose length to accommodate your application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Outboard Flushing System - 2 Outlet with Two 5' Hose KitsThe Flushmaster is a portable, marine-grade device designed to automate the flushing process for up to four outboard motors. Powered by (3) AA batteries, it ensures thorough engine cleaning by flushing each motor sequentially before automatically shutting off. With its IP67 waterproof certification, the Flushmaster is built to last, offering a convenient and time-saving solution for outboard maintenance. Select the perfect hose length for your setup and experience hassle-free engine care with just the push of a button.The Flushmaster Outboard Flushing System is a marine-grade, portable device that simplifies the process of flushing single, dual, triple, and even quad outboard motors. Powered by (3) AA batteries, the Flushmaster offers effortless engine maintenance while saving time and water. With just the push of a button, your motors are flushed one at a time, ensuring thorough cleaning and optimal engine performance. Once the flushing is complete, the device automatically shuts off and blocks the water flow, leaving you free to enjoy your day without further attention.Portable - Use it anywhere you have a freshwater supply: Water Spigot Garden Hose PVC Plumbing Choose the appropriate hose length based on your setup and application.With its IP67 Waterproof Certification, the Flushmaster is built to withstand harsh marine conditions, ensuring reliable performance season after season. Say goodbye to the hassle of traditional flushing methods and embrace the simplicity of Flushmaster for a smoother boating experience.What's Included? Flushmaster Device (3) AA Batteries Outlet Hoses Hose Clamps Screwdriver Instructions Manual and Warranty Product Installation: Install the included (3) AA batteries Install the outlet hose(s) to the Flushmaster device Connect the Flushmaster device to a water source Attach the outlet hose(s) to your boat motor(s) Press START to begin the automated flushing process Product Compatibility:The Flushmaster is compatible with four-stroke outboards and flush ports. Ensure you select the optimal hose length to accommodate your application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

5/8" Type A2 Fuel & Vent Line Hose - Black - Sold by the FootTrident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.Features: Sold by the foot Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Applications: Fuel Hose for vent and diesel distribution  For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Specifications: Inner Diameter: (inch) 5/8" / (mm) 15.9 Outer Diameter: (inch) 0.960 / (mm) 24.4 Burst Pressure: (psi) 200 / (mpa) 1.38 Working Pressure: (psi) 50 / (mpa) 0.34 Bend Radius: (inch) 3" / (mm) 76.2 Weight: (lb/100 ft.) 25.84 / (kg/m) 11.72 *The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 5/8" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 1"L WT: 0.27 lbs Quick Guide (pdf)

Read more less

Original Equipment Quality Replacement Yamaha Outboard Starter - 2003-2009Replacement outboard starter that will fit 200-250HP 2003-2009.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces: YAMAHA Outboard Starter 60X-81800-01-00 YAMAHA Outboard Starter 60X-81800-00-00 YAMAHA Outboard Starter 60V-81800-00-00 SIERRA Outboard Starter 18-6832 HITACHI Outboard Starter S114-863 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Premium Replacement Outboard Alternator - Verado 12V 70AReplacement alternator that will fit all Mercury Verado Outboards, 12 Volt, 70 AMP, internal fan, multi-groove serpentine pulley included.Features: All alternators are engineered for performance and reliability All alternators are engineered and manufactured with precision and quality All alternators must meet or exceed OEM performance before being boxed Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:DELCO Alternator 19020618MERCURY Alternator 892940TMERCURY Alternator 892940T01MERCURY Alternator 892940T02SIERRA Alternator 18-5929This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 70A Voltage: 12v Box Dimensions: 8"H x 8"W x 9"L WT: 9.7 lbs UPC: 693006010533 Quick Guide (pdf)

Read more less