Autopilot Pump, 12 VDC, 1.7 Cubic Inches Per Second (For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume)The PUMPHRP17-12 is a reversing pumpset designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two-piece gear housed in an eccentric ring. This allows for incredibly quiet, reliable and precise operation. A hydraulic steering system consists of a hydraulic actuator and one or more steering wheel pumps, or helm pumps. As the steering wheel (helm pump) is turned in the port direction, hydraulic oil is pumped into the port hydraulic steering line. This oil is directed into the port side of the steering cylinder. As the cylinder moves to port, oil from the starboard side of the cylinder returns to the helm pump through the starboard hydraulic lines. One end of the cylinder is fixed and the other is connected to a tiller arm, which is connected to a rudder shaft. With this connection to the tiller arm the linear movement of the cylinder to port is changed to rotary movement, which turns the rudder and steers the vessel to port. Moving the steering wheel to starboard produces the same reaction with oil being pumped out of the starboard line and returning through the port line. If more than one helm pump is used, a return/fill line must be installed to connect the cases of all helm pumps together. The output flow rate of the pumpset determines the speed of the steering cylinder. The PUMPHRP17-12 outputs 1.6 cu. in. of oil per second and requires a 12VDC input. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Pumps/Drives Box Dimensions: 6"H x 6"W x 10"L WT: 10 lbs UPC: 611679305077 Owner's Manual (pdf)

Read more less

Autopilot Pump, 12 VDC, 1.0 Cubic Inches Per Second (For Ram Sizes of Up to 12 Cubic Inches in Volume)WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Pumps/Drives Box Dimensions: 6"H x 6"W x 10"L WT: 9.1 lbs UPC: 611679303936 Owner's Manual (pdf)

Read more less

PG700 Integrated Heading Sensor, NMEA2000The PG-700 is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading. These sophisticated components are contained within a rugged, compact case. Unique design elements make the PG-700 virtually maintenance-free and easy to install. The PG-700 heading sensor detects terrestrial magnetism and produces compass data that can be utilized in CAN bus network.Features: Angular velocity sensor and magnetic bearing sensor incorporated Automatic determination of installation site suitability L-shaped mounting base for mounting on bulkhead Output of magnetic bearing data to FURUNO CAN bus device This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Integrated Heading Sensor, NMEA2000 Features: Angular velocity sensor and magnetic bearing sensor incorporated Automatic determination of installation site suitability L-shaped mounting base for mounting on bulkhead Output of magnetic bearing data to FURUNO CAN bus device

Read more less

Furuno FA40 AIS ReceiverModel: FA40The new FA40 AIS Receiver provides multiple ports for simple connection to your NavNet, AIS-capable Radar or Chart Plotter, or your favorite navigation software. AIS is a critical enhancement in congested waterways, or during periods of limited visibility or heavy seas. Information such as vessel name and call sign, position, course, and speed are graphically presented, allowing you to monitor vessel traffic easily. Because it does not require line of sight to function, you can see AIS-equipped vessels on your electronics before you can see them on the water.The FA40 is an AIS receiver only. It works with nearly any VHF antenna, making installation simple.SpecificationsPower Usage12-24 VDC What's in the Box: FA40 receiver 5A fuse x 2 2m NMEA Cable Power/Data Cable

Read more less

200 Watts 235 kHz Bronze Thru-Hull Depth and High-Precision Temperature ( + / - .02 degree ) 10-Meter Cable with 7-Pin Connector

Read more less

The PSU017 is an external power supply designed to work with the DRS2D and DRS4D Dome Radar Sensors when interfaced with and NavNet TZtouch MFD. Standard Features: Power supply for DRS2D and DRS4D Dome Radar Sensors Includes a pre-connected 3 meter power cable to connect directly to ship's main 12VDC or 24VDC input voltage and 48VDC DRS output voltage Cast Aluminum Housing Legendary Furuno power supply performance and reliability Dimensions: 9 in h x 7.5 in w x 3 in d Weight with cable: 5 lbs.

Read more less

The RD33 is a navigational data organizer that allows the operator to select the perfect way t0 display data from interfaced equipment such as GPS, chartplotter, radar, fish finder, autopilot, instruments and other sensors including engine information. The high contrast, color 4.3 in LCD may be installed in a compact space, remote from its sources. The screen is impressively bright, remarkably crisp and easy to read. Various display modes are available including Speedometer, Highway and Text. The text mode presents up to six of the most necessary types of data. The display layout can be customized for your specific needs. This versatile product can also be added to a NavNet 3D system, displaying a variety of navigation data from the CAN bus network. The RD33 accepts a wide variety of navigation data and displays them in numerical and graphic formats. You may freely select and arrange which data is displayed on the screen. Furthermore, seven patterns of customized display set tings can be stored in the memory to give speedy access and convenience while onboard. The RD33 features a visually appealing fresh new look, combining easy access with user functionality. Thanks to the bright, high-resolution LCD, the RD33 provides an easy-to-read display to monitor information from remote equipment, through an intuitive graphical user interface. Standard Features: 4.3 in ?Sunlight Viewable? color LCD (Brightness: 700 cd) Enhanced data legibility thanks to large characters and high resolution display Customizable display format from Full-screen to a 6-way split screen presentation Supports both CAN bus and NMEA0183 interfaces Two independent CAN bus input and output ports incorporated for daisy chain networking Internal NMEA0183/CAN bus conversion capability available Simultaneous alarm monitoring capabilities for Water Temp, Depth, Speed, Arrival, Anchor, XTE, Trip, Odometer, Timer and Countdown Timer, Roll & Pitch, Wind Speed, Wind Direction, and Battery.

Read more less

RD33 4.3" Color LCD Navigational Data OrganizerThe RD33 is a navigational data organizer that allows the operator to select the perfect way to display data from interfaced equipment such as GPS, chartplotter, radar, fish finder, autopilot, instruments and other sensors including engine information. The high contrast, color 4.3" LCD may be installed in a compact space, remote from its sources. The screen is impressively bright, remarkably crisp and easy to read. Various display modes are available including Speedometer, Highway and Text. The text mode presents up to six of the most necessary types of data. The display layout can be customized for your specific needs.This versatile product can also be added to a NavNet 3D system, displaying a variety of navigation data from the CAN bus network.The RD33 accepts a wide variety of navigation data and displays them in numerical and graphic formats. You may freely select and arrange which data is displayed on the screen. Furthermore, seven patterns of customized display set tings can be stored in the memory to give speedy access and convenience while onboard.The RD33 features a visually appealing fresh new look, combining easy access with user functionality. Thanks to the bright, high-resolution LCD, the RD33 provides an easy-to-read display to monitor information from remote equipment, through an intuitive graphical user interface.Features: 4.3" Sunlight Viewable color LCD (Brightness: 700 cd) Enhanced data legibility thanks to large characters and high resolution display Customizable display format from Full-screen to a 6-way split screen presentation Supports both CAN bus and NMEA0183 interfaces Two independent CAN bus input and output ports incorporated for daisy chain networking Internal NMEA0183/CAN bus conversion capability available Simultaneous alarm monitoring capabilities for Water Temp, Depth, Speed, Arrival, Anchor, XTE, Trip, Odometer, Timer and Countdown Timer, Roll & Pitch, Wind Speed, Wind Direction, and Battery This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Shape: Square Screen Size: 4.3" Instrument Function: Multifunction Box Dimensions: 7"H x 9"W x 9"L WT: 4.2 lbs UPC: 611679329455 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Furuno 10 Target Auto PlotterModel: ARP1110 Target Auto Plotter

Read more less

200 Watts 235 kHz Bronze Thru-Hull Depth and Temperature (+/ - 1 degree ) 10-Meter Cable with 7-Pin Connector

Read more less

FAP3011 Control Head for NavPilot 300 Only Up To 3 Control Heads On 1 System Done Via N2k.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Furuno 225T-TM904 Transom Mount CHIRP Side-Scan Transducer for NavNet TZtouch3Model: 225T-TM904 150 watts on each side CHIRP 220-240kHz Transom Mount with Temperature 12-pin connector 12m (40ft) cable Mounting bracket and hardware included The 225T-TM904 is a Transom Mount transducer that works with the built-in CHIRP Side-Scan functionality on your NavNet TZtouch3 TZT12F, TZT16F, or TZT19F MFD.

Read more less

Wind Transducer with 30M CableElegant, Accurate & AffordableThe FI5001 is an analog Wind Transducer for use with the FI50 and FI70 series of instrument displays. It is capable of detecting wind angle accuracy of better than ±10° and wind speed accuracy of better than ±5% (20 kt). The FI5001 has a power requirements of less than 40 mA on a 12VDC system.Important Note: The FI5001 Sensor does not come with a cable as standard, while the FI5001/30M comes with a 30 meter cable. Available 30 meter and 50 meter cable kits include a junction box.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

600 Watts 50/200 kHz 40/10 degree Beam Angles Bronze Thru-Hull with 7 feet Stem, Speed and Temperature 30 Foot Cable with 10-Pin Connector

Read more less

200 Watts 235 kHz Plastic Thru-Hull Depth and Temperature (+/ - 1 degree ) 10-Meter Cable with 7-Pin Connector

Read more less

200 Watts 235 kHz Plastic Transom Mount Depth, Speed and Temperature (+/ - 1 degree ) 10-Meter Cable with 7-Pin Connector

Read more less

Furuno FI-5001 Wind TransducerRequires CableModel: FI5001The FI5001 is an analog Wind Transducer for use with NavNet 3D and the FI50 series of instrument displays. It is capable of detecting wind angle accuracy of better than 10 and wind speed accuracy of better than 5% (20 kt). The FI5001 has a power requirements of less than 40 mA on a 12VDC system.Important Note: The FI5001 Sensor does not come with a cable as standard. Please select a 30 meter or 50 meter cable kit when ordering the FI5001 Wind Sensor. Both 30 meter and 50 meter cable kit include a junction box.

Read more less

Furuno TEU001B Touch Encoder Unit for NavNet TZtouch2 and TZtouch3 - BlackModel: TEU001BThe TEU001 combines "The Best of Both Worlds" when it comes to NavNet control. The innovative TEU001B Touch Encoder Unit provides a compact, touch-based interface that emulates the already familiar Edge Swipe UI of NavNet TZtouch2 and NavNet TZtouch3. It also incorporates a beautifully designed RotoKeyTM for easy access and tactile control of many common operations, including zoom in/out and quick menu scrolling. The color LCD touchscreen will enhance the look of any dash and provide incredible armchair control.With a RotoKeyTM and LCD Touch Screen that supports both single and two-finger tap functions, you can control nearly every function of your NavNet TZtouch2 or TZtouch3 MFD directly from this simple and stylish Touch Encoder. Edge swipe up or down, left or right to access all of your menu options, take advantage of long and short press functions, and zoom and pan your charts - total control of your NavNet TZtouch2 or NavNet TZtouch3 MFD is at your fingertips!SpecificationsDiameter2.22 What's in the Box: TEU001B Touch Encoder Unit 3 meter M12 to USB Adapter Cable Mounting Plate with 4 #6 screws Documentation"

Read more less

Furuno MCU006H Horizontal Remote Control for NavNet TZtouch3, NavNet TZtouchXL, and TZT2BB Black BoxModel: MCU006HFuruno's MCU006 Series of Remote Controller for NavNet TZtouch3, TZtouchXL, and TZT2BB Multi Function Displays feature a comfortable rotary knob and beveled keys for enhanced ease of use. The large knob can be utilized as the RotoKey and for zooming in/out on both TZtouch3 and TZtouchXL. The remote also has 10 dedicated buttons that operate different functions.A single MCU006 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU006 Remote Control is a perfect companion for any helm or bridge. Whether you want to mount the controller in the arm of the captain's chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU006 is an ideal solution.What's in the Box: MCU006H Control Unit 2M N2K Cable Mounting Screws x 4 Panel Cover Flush Mount Gasket Flush Mount Template

Read more less

Furuno GP39 Color GPS/SBAS Receiver Model: GP39 UPC: 611679364487 GPS core delivers enhanced position fixing accuracy Bright 4.2 high-resolution color LCD (700cd)

Read more less

Furuno FI70 4 in Data Display Model: FI70 Perfect cosmetic match for NavNet TZtouch/TZtouch2 and NavPilot 711C Clear 4.1 in QVGA screen that is viewable even under direct sunlight Use existing sensors with new anaolog IF-NMEAFI converter Low power consumption (0.15 A max) Simple AIS display through connected CAN bus devices Simple and intuitive graphical user interface allows you to fully customize your display Bonded color LCD ensuring condensation free operation as well as great visibility The new FI-70 INSTRUMENT/DATA ORGANIZER sports a vibrant 4.1 in bonded color display that is visible even in the harshest sunlight conditions. Utilizing the CAN bus network, external sensors can easily be connected for simple and reliable operation. The FI-70 features an easy to operate graphical user-interface. It allows you to customize almost every display property, allowing you to choose the information you want to be displayed, in the way you want to see it! No matter if you own a powerboat or a sailboat, the FI-70 INSTRUMENT/DATA ORGANIZER will be equally useful with the proper sensors connected. For maximum performance and simple setup, the FI-70 automatically asks you which type of vessel you have, helping to customize operation of the unit. With its low power consumption and easy installation, it's hard to imagine a vessel where the FI-70 wouldn't be a benefit. SpecificationsScreen size4.1 in Color LCD Screen resolution 320 (V) x 240 (H) pixels (QVGA) Brigtness Typical 700 cd/m2 Display mode Analog Meter, Graph, Highway, Race Timer, Simple AIS, Data Box Interface Ports 1 - CAN bus Input PGNS 059904, 060928, 061184, 126208/720/992/996, 127237/245/250/251/257/258/488/489/493/497/505, 128259/267,129025/026/029/033/038/039/040/283/ 284/285/794/809/810,130306/310/311/312/313/316/ 576/577/816/821/822/825/880/841 Output PGN 059392/904, 060928, 061184, 126208/464/720/ 993/996,130816/821/822/823/825/841 Enviroment Operation temperature -15 degC to +55 degC Waterproofing IPX6 Power Input 15 VDC through CAN bus Consumption 15 VDC 0.15 A max, LEN3 Dimensions 4.5 in W x 4.5 in H What's in the Box: Display Installation materials c

Read more less

GP39 GPS/WAAS Navigator with 4.2" Color LCDFuruno's GP39 GPS Navigator provides accurate and reliable position fixing, thanks to a 12-channel GPS receiver combined with integrated SBAS (WAAS/EGNOS/MSAS) technology. The GP39 has various display modes, including Plotter, Highway, Steering, NAV data and Satellite monitor, as well as 2 user-customizable display modes, allowing you to select which data you want displayed on its 4.2" color LCD. Up to 3,000 points of ship track, 10,000 waypoints and 100 routes (each with up to 30 waypoints) can be stored. The waypoint and route data can be exported/imported via a USB flash drive or signal converter.The GP39 can be networked with a fish finder, sonar, radar or other navigation equipment for feeding highly accurate navigation data. The GP39 receives the TLL (Target Latitude/Longitude) sentence from networked fish finders or sonars and can display the received information, allowing you to easily mark fish school locations.Features: Designed GPS core delivers enhanced position fixing accuracy Bright 4.2" high-resolution color LCD (700cd) Storage for 3,000 track points, 10,000 waypoints and 100 routes SBAS capable for better positioning calculations Share and display position information on networked equipment such as a Fish Finder, Sonar, Radar, etc. NMEA0180 input port receives data from Fish Finder, Radar, etc. 7 display modes available, including 2 user-customizable modes Displays position data in Loran TD's USB port for importing/exporting waypoints and routes; Upload/download data in GPX format for easy transfer to TZtouch/TZtouch2 "Click-In" hanger for easy mounting/dismounting and uses no knobs - also perfect for overhead mounts Multi-language ready : English, French, Spanish, Chinese, Vietnamese, Malay, Indonesian and Thai The GP39 includes antenna (GPAC01), power cable, hard cover, mounting bracket and standard installation materials. The GP39 serves as the direct replacement for the GP32, which is no longer available for sale from Furuno USA.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Routes: 100 Waypoints: 10,000 WAAS: Yes Screen Size: 4.2" Box Dimensions: 7"H x 9"W x 14"L WT: 4.5 lbs UPC: 611679364487 Owner's Manual (pdf)Brochure (pdf)

Read more less

FI70 4.1" Color LCD Instrument/Data OrganizerThe FI70 Instrument/Data Organizer features a vibrant 4.1" color LCD screen. The screen is bonded for fog-free performance and is perfectly visible even in bright daylight. A variety of external sensors can be connected via the CAN bus network for simple and reliable operation. Display modes include: Heading, Wind, Engine, AIS, Graph, Timer, Highway, Nav Data, Rudder, Roll & Pitch, and more.The FI70 boasts an amazing user interface - almost anything can be customized. Conveniently choose the way you want information to be displayed, in a way that is most relevant to you.Features: Perfect cosmetic match for NavNet TZtouch/TZtouch2 and NavPilot 711C Beautiful, vibrant 4.1" Color LCD Use existing sensors with new analog IF-NMEAFI converter Low power consumption (0.15 A max) Simple AIS display through connected CAN bus devices This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Instrument Function: Multifunction Box Dimensions: 3"H x 8"W x 16"L WT: 2.4 lbs UPC: 611679359315 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

200 Watts 235 kHz Bronze Thru-Hull Depth, Speed and Temperature (+/ - 1 degree ) 10-Meter Cable with 7-Pin Connector Can be flush mounted on a hull with up to a 22 deg degree dead rise

Read more less

FI5001The FI5001 is an analog Wind Transducer for use with NavNet 3D and the FI50 series of instrument displays. It is capable of detecting wind angle accuracy of better than 10° and wind speed accuracy of better than 5% (20 kt). The FI5001 has a power requirements of less than 40 mA on a 12VDC system.Important Note: The FI5001 Sensor does not come with a cable as standard. Please select a 30 meter or 50 meter cable kit when ordering the FI5001 Wind Sensor.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Furuno TEU001S Touch Encoder Unit for NavNet TZtouch2 and TZtouch3 - BlackModel: TEU001SThe TEU001 combines "The Best of Both Worlds" when it comes to NavNet control. The innovative TEU001S Touch Encoder Unit provides a compact, touch-based interface that emulates the already familiar Edge Swipe UI of NavNet TZtouch2 and NavNet TZtouch3. It also incorporates a beautifully designed RotoKeyTM for easy access and tactile control of many common operations, including zoom in/out and quick menu scrolling. The color LCD touchscreen will enhance the look of any dash and provide incredible armchair control.With a RotoKeyTM and LCD Touch Screen that supports both single and two-finger tap functions, you can control nearly every function of your NavNet TZtouch2 or TZtouch3 MFD directly from this simple and stylish Touch Encoder. Edge swipe up or down, left or right to access all of your menu options, take advantage of long and short press functions, and zoom and pan your charts - total control of your NavNet TZtouch2 or NavNet TZtouch3 MFD is at your fingertips!SpecificationsDiameter2.22 What's in the Box: TEU001S Touch Encoder Unit 3 meter M12 to USB Adapter Cable Mounting Plate with 4 #6 screws Documentation"

Read more less

Furuno BBWX4 SiriusXM Satellite Weather ReceiverModel: BBWX4Keep track of the weather with Furuno's BBWX4 Fourth-Generation Sirius/XM Satellite Weather Receiver for NavNet Tztouch, NavNet TZtouch2 andTZtouch3 series MFDs. Furuno and Sirius/XM have teamed up to bring you live, up-to-date weather information and forecasting to give you peace of mind, no matter when or how you are using your boat. The weather information is obtained from the weather industry's leading experts and is delivered via digital receiver through Sirius/XM's Marine Weather services. (SiriusXM subscription sold separately.)(Compatible with NavNet TZtouch v6.01 software (late-February 2019), TZtouch2 software v6.21 (mid-February 2019) and TZtouch3. (Not compatible with prior NavNet generations)With the BBWX4, your NavNet display will have the ability to receive high-quality and comprehensive weather information and forecasting that you can overlay onto your raster and vector charts.With the BBWX4, your NavNet display will have the ability to receive high-quality and comprehensive weather information and forecasting that you can overlay onto your raster and vector charts.Now you can have your weatherman with you 24/7 with your TRUE color Radar/Chart Plotter and Sirius Marine Weather! Only, this weatherman can show you more than just the weather. Easily view critical fishing information such as plankton, altimetry, lightning strikes and more!Now you can bring your favorite SiriusXM Satellite Radio channels with you onboard. Radio channels can be played on NavNet TZtouch2 and TZtouch3 using the BBWX4. Requires a Sirius/XM weather service subscription, sold separatelyWhat's in the Box: SiriusXM Receiver Shakespeare SRA-50 Antenna w/25 feet cable Power cable Audio cable SMA to SMB adapter Documentation

Read more less

InfoLINK BBWX4 Satellite Weather ReceiverThe BBWX4 delivers live, up-to-date weather information and forecasting, providing peace of mind no matter when or how your customers are using their boats within the SXM satellite footprint. Weather information is obtained from the industry's leading experts and is delivered via digital receiver through SiriusXM's Marine Weather services (Marine Coastal and Marine Offshore packages). Boaters will also have access to their favorite SiriusXM Radio channels when connecting the BBWX4 to their TZtouch2 MFD.Receive high-quality, comprehensive weather information and forecasting that can overlay onto both raster and vector charts. Boaters will have access to premium weather content, such as current weather reports, NOWRad® nationwide high-resolution Weather Radar imagery, and high-resolution Sea Surface Temperature images that can help fishermen locate hot spots. They'll also be able to view other critical information, such as tropical storm tracks, lightning strikes, even Great Lakes forecasts, and more! Canadian boaters can also access these features throughout much of Canada. Visit the SiriusXM website for a comprehensive listing of their Marine Service packages and coverage area.Features: Compatible with NavNet TZtouch v6.01 software (late February) and TZtouch2 software v6.21 (mid-February) - Not compatible with prior NavNet generations Weather and Radio capabilities interface seamlessly with TZtouch2 TZtouch (1st gen.) provides SXM Weather only; Radio services are not supported Compact waterproof design (IPX6/7) - about half the size of the BBWX3 Animated NOWRad® Weather Radar, Instant Forecast Info Sea Surface Temp, Wind, Wave Height, Squall Lines, Buoy Reports and more Front LED indicator lights show Network and Power port status Dual voltage (12/24VDC) with low power consumption (less than 3W) The BBWX4 comes with all the necessary cables:  Power, audio, and network cables Shakespeare SiriusXM SR50 antenna 25-foot antenna cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Compact in size, waterproof, yet big on power, features and performance, Furunos GP32 is perfect for a wide range of smaller fishing boats and pleasure craft.This advanced unit, based on the popular GP31, provides accurate and reliable position fixing, thanks to a super sensitive, 12-channel GPS receiver combined with integrated WAAS technology.The unit has a waterproof display and is built to stand up to tough marine conditions. This durable casing houses an impressive memory, capable of storing up to 1,000 points of ships track, 999 points for marks and waypoints, and 50 routes of up to 30 waypoints each. Vital navigation data is presented on a 4.5-inch diagonal Silver Bright LCD screen with adjustable brilliance. Innovative graphic displays include Nav, Highway, Steering, Track Plotting, and two operator programmable modes, all extremely easy to use.The GP32, like all Furuno nav receivers, feature Furunos NMEA 0183 programmable interface system for feeding highly accurate nav data to your Furuno radar, chart plotter, autopilot or sounder. It even includes a dedicated RS-232 port for connection to a PC. And of course, it integrates perfectly with Furuno's NavNet line of Radar/Chart Plotters.Standard Features 12 Channel, Parallel Tracking GPS Receiver with WAAS technology, DGPS Ready Up to 900 Knot Tracking Velocity 20 Second Warm Start Acquisition 1-3M Accuracy (95% of the time with WAAS on and SA off) 4.5 Inch Diagonal Monochrome High Contrast Silver Bright LCD Screen Waypoint and Route Data Transfer Via PC to another GP32 5 Display Modes available1. Plotter - 14 Plot Scales from 0.2 - 320 N.M.2. NavData - Position Indication in Lat./Long or Loran-C TD's3. Steering - Graphic Vessel Course, Position and Speed Information4. Highway - 8 Range Scales from 0.2 - 16 N.M.5. Analog or Digital Display Speedometer6. Two user customizable displays Man Overboard Key Waypoint entry by Loran-C TD's (Highway Mode) Alarms for Arrival, XTE, Anchor Watch and High/Low Speed Points Memory Capacity: 1000 Points of Vessel Track, 999 Points for Waypoints and Marks, and 50 Routes comprised of up to 30 Waypoints Waypoint Comments of up to 16 Characters Event Marks Entered using one of Nine Symbols 2 Data Ports for both RS422 and RS232 Feed nav data to radar, chart plotter, autopilot or sounder through NMEA0183 port Upload/Download waypoints and routes directly from NavNet display Built in Simulator for Showroom Display and Training Replaced By GP39  

Read more less

Furuno FIP-460 Waterproof Network IP CameraModel: FIP-460 Up to 3MP Resolution (2304 x 1296) High Performance LED - 10 Meter Range Mechanical IR Cutout filter for True Day / Night Operation Power using direct 12vdc, PoE injector, or PoE HUB IEEE802.3af Power over Ethernet (PoE) IP66 Water Ingress Protection Small, Compact Housing Suitable for Multiple Applications, such as onboard security, sport fishing, engine room and vessel monitoring Wide Operating Temperature Range Various mounting options as the inner camera ball is fully rotatable Simple setup with TZtouchXL MFDs Compatible with Furuno TZtouchXL MFDs, TIMEZERO software v4.1 and above, and ONVIF compliant devices. With an impressive up to 3MP resolution (2304 x 1296), the FIP-460 camera ensures crystal-clear imagery, capturing every detail with remarkable clarity. The mechanical IR cutout filter enables true day and night operation, providing consistent performance around the clock.This marine camera offers flexible power options, including direct 12vdc, PoE injector, or PoE HUB, adhering to the IEEE802.3af Power over Ethernet (PoE) standard. Its IP66 water ingress protection guarantees durability and reliability in the harshest marine environments. The camera's small, compact housing and wide operating temperature range make it suitable for multiple applications, such as onboard security, sport fishing, engine room monitoring, and overall vessel surveillance.Installation is a breeze with various mounting options, thanks to the fully rotatable inner camera ball. Seamlessly integrate this camera with TZtouchXL MFDs, Furuno TZtouchXL MFDs, TIMEZERO software v4.1 and above, and other ONVIF-compliant devices. Whether you're enhancing security or capturing the thrill of the catch, this marine video camera is your go-to solution for unparalleled performance and versatility on the water.

Read more less

FIP-460 IP Camera for TZTouchXL MFD'sHigh-Performance, Fully Rotatable PoE CameraWith an impressive up to 3MP resolution (2304 x 1296), the FIP-460 camera ensures crystal-clear imagery, capturing every detail with remarkable clarity. The mechanical IR cutout filter enables true day and night operation, providing consistent performance around the clock.This marine camera offers flexible power options, including direct 12vdc, PoE injector, or PoE HUB, adhering to the IEEE802.3af Power over Ethernet (PoE) standard. Its IP66 water ingress protection guarantees durability and reliability in the harshest marine environments. The camera’s small, compact housing and wide operating temperature range make it suitable for multiple applications, such as onboard security, sport fishing, engine room monitoring, and overall vessel surveillance.Installation is a breeze with various mounting options, thanks to the fully rotatable inner camera ball. Seamlessly integrate this camera with TZtouchXL MFDs, Furuno TZtouchXL MFDs, TIMEZERO software v4.1 and above, and other ONVIF-compliant devices. Whether you're enhancing security or capturing the thrill of the catch, this marine video camera is your go-to solution for unparalleled performance and versatility on the water.Features: Up to 3MP Resolution (2304 x 1296) High Performance LED - 10 Meter Range Mechanical IR Cutout filter for True Day / Night Operation Power using direct 12vdc, PoE injector, or PoE HUB IEEE802.3af Power over Ethernet (PoE) IP66 Water Ingress Protection Small, Compact Housing Suitable for Multiple Applications, such as onboard security, sport fishing, engine room and vessel monitoring Wide Operating Temperature Range Various mounting options as the inner camera ball is fully rotatable Simple setup with TZtouchXL MFDs Compatible with Furuno TZtouchXL MFDs, TIMEZERO software v4.1 and above, and ONVIF-compliant devices This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

MCU006 Vertical Remote Control Total Control with ease and comfort. Furuno's MCU006 Series of Remote Controller for NavNet TZtouch3, TZtouchXL, and TZT2BB Multi-Function Displays feature a comfortable rotary knob and beveled keys for enhanced ease of use. The large knob can be utilized as the RotoKey and for zooming in/out on both TZtouch3 and TZtouchXL. The remote also has 10 dedicated buttons that operate different functions.A single MCU006 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU006 Remote Control is a perfect companion for any helm or bridge. Whether you want to mount the controller in the arm of the captain's chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU006 is an ideal solution.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Furuno DST-810 active Depth, Speed, Temperature thru-Hull Bronze 235 kHz transducer.Model: DST-810MSF 5 Hz speed output (5X per second) for visibly smoother speed-through-water reporting and faster data for better decision making Integrated attitude sensor for heel and trim benefits sailing and power boats Advanced Speed Calibration allows for manual speed entries for multiple heel angles and up to 10 speeds, formerly only possible through expensive PC software DST810 stores configurations and delivers data to the NMEA 2000(R) network. Depth, heel-corrected speed-through-water, heel and trim, and water temperature from one installed multisensor. Popular depth sensor for shallow water performance. SpecificationsAcoustic WindowUrethane Hull Deadrise Up to 22 deg Data Update Rate Depth 1X/second Data Update Rate Speed 5X/second Attitude Accuracy +/- 1 deg nominal after sensor calibration Depth Frequency 235 kHz Minimum Depth Range 0.5 m (1.6 feet) Maximum Depth Range Up to 100 m (330 feet)-NMEA 2000(R) Speed Range Up to 45 knots Pressure Rating 3 m (10 feet) Pulse Rate 20,000 p/nm* (5.6 Hz per knot)-*p/nm = pulses per nautical mile Supply Voltage 9 VDC to 16 VDC-per NMEA 2000 Supply Current <200 mA-per NMEA 2000(R) Wireless Protocol Bluetooth Low Energy (BLE) Wireless Range Up to 30 feet depending on mount location Standard Cable Length 6 m (20 feet) DeviceNet-NMEA 2000(R) Temperature Sensor Accuracy +/-0.5 degC (+/-1.8 degF) Temperature Sensor Range -10 degC to 40 degC (14 degF to 104 degF) NMEA 2000 Load Equivalency Number (LEN) 3 What's in the Box: DST-810 Insert Bronze Housing

Read more less

Furuno MCU004 Remote ControlModel: MCU004 Active Display" switching allows (1) MCU004 to control up to (4) TZtouch2 MFDs Joystick plus full RotoKey controller Edge-swipe plus cursor control for full menu access Home & brilliance control Pan & Zoom capability Shortcut function button Built-in alarm buzzer Attached 3 meter USB cable for direct connection to MFD "STBY/AUTO" Autopilot engage/disengage With its sleek

Read more less

GPS021S DGPS AntennaFuruno's GPS/DGPS H-Field Antenna WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Antennas Box Dimensions: 7"H x 9"W x 11"L WT: 2.2 lbs UPC: 611679361257

Read more less

200 Watts 235 kHz Plastic Thru-Hull Depth, Speed and Temperature (+/ - 1 degree ) 10-Meter Cable with 7-Pin Connector

Read more less

Furuno MB-1100 Matching BoxModel: MB1100Transducer Matching Box with 10pin Connector.

Read more less

Furuno DT-800MSF Depth and temperature in one compact bronze housingModel: DT-800MSF Depth and temperature in one compact bronze housing Fast-response temperature sensor provides ±0.2 degC (±0.1 degF) accuracy Acoustic Window: Urethane Designed with Airmar's exclusive Broadband Ceramic Technology, the DT-800MSF's 235 kHz element improves resolution without sacrificing sensitivity. The higher power rating 100 W RMS provides spot-on depth readings in as little as 0.45 m (1.4 feet) of water and can reach depths up to 180 m (600 feet).SpecificationsWeight1.5 kg (3.4 lb) Data Update Rate 1 per second Minimum Sounding Depth 0.5 m (1.6 feet) Maximum Sounding Depth 180 m (590 feet) Pressure Rating 3 m (10 feet) Pulse Rate 20,000 p/nm* (5.6 Hz per knot)-*p/nm = pulses per nautical mile Smart Sensor Supply Voltage at 100% Sound Power Output 10 VDC to 25 VDC Supply Current 40 mA S tandard Cable Length 6m NMEA 2000(R) Load Equivalency Number (LEN) 4

Read more less

Furuno HUB102 5-Port Marinized Ethernet HubModel: HUB102 Five Ethernet ports with twist lock waterproof connectors Transfer speed: Gigabit full duplex, 10Mbps/100Mbps half/full duplex Connect up to (6) HUB102 for expanded network capabilities Compatible with virtually all Ethernet devices LED status indicators for power and network ports Simple bulkhead or deck mounting with no setup required The HUB102 is a waterproof, 5-port Ethernet Hub for use with the NavNet series of Multi Function Displays.

Read more less

The FAP6112 is a Rudder Reference Unit for the Furuno NavPilot series of autopilots.

Read more less

HUB102 5-Port Marinized Ethernet HubHUB102 Marinized Ethernet Hub, designed to simplify marine connectivity with up to gigabit speed performance. Supporting multiple sensors and Furuno Multi-Function Displays (MFDs), the HUB102 features water-resistant connections and sealed covers to protect unused data ports. With LED indicators for power and port status, setup is a breeze—plug in peripherals, and they’re instantly detected. Expand any NavNet TZtouch system effortlessly by adding up to six HUB102s to the network.Features: Five Ethernet ports with twist-lock waterproof connectors Transfer speed: Gigabit full duplex, 10Mbps/100Mbps half/full duplex Connect up to (6) HUB102 for expanded network capabilities Compatible with virtually all Ethernet devices LED status indicators for power and network ports Simple bulkhead or deck mounting with no setup required This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less