Garmin 12-pin Transducer Y-CableModel: 010-12225-00UPC: 753759128159 This Y-Cable works great with all 12-pin GT transducers - transom mount or thru-hull. You can pair up to two GT3x's, 4x's, or 5x's. The Y-Cable divides the signals out for you: From the right-side transducer, it uses the traditional disc, Clearvü, Right-SideVü, temperature sensor and Garmin ID From the left-side transducer, it uses only the Left-SideVü The -00 cable is rather long, ~30 feet, so keep that in mind when routing cables The new -10 version is only 2m long and more suited for transom mount mount transducers Both cables have "PORT" and "STARBOARD" stickers on the ends to make it easy to connect up for each side No software setup required Connect a port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.Y-cable for splitting out left and right SideVü from two SideVü transducers to avoid engine lower unit or keel shadowing.

Read more less

Garmin OnDeckTM Shore Power Sensor - Hard-wiredModel: 010-13009-08Monitor the status of your shore power remotely using the OnDeck Hub and one of these sensors.Choose the hard-wired option to connect directly into AC mains power without the need of an outlet plug. This hard-wired product works with 90-264 VAC input and has 5 VDC output voltage.

Read more less

Garmin In/Out Data Cable (19-pin), Sensor/Relay OutputModel: 010-13009-04Replacement 19-pin data cable for your compatible OnDeckTM Hub.

Read more less

Garmin OnDeckTM Relay Switch (12 Vdc)Model: 010-13009-01Control your vessel remotely using the OnDeckTM Hub and a relay switch. Add up to five switches to your OnDeck Hub to stay in control.Verify that the input power for your OnDeck Hub operates between 10 Vdc and 15.6 Vdc to ensure compatibility with your system.SpecificationsOperating temperature rangeFrom -15 deg to 85 degC (from 5 deg to 185 degF) Storage temperature range From -40 deg to 155 degC (from -40 deg to 311 degF) Control voltage (coil) 7.8 to 15.6 Vdc Load power min. (contacts) 0.1 A Load power max. (contacts) Up to 15 A at 10 to 16 Vdc Up to 9 A at 20 to 32 Vdc

Read more less

Garmin OnDeckTM Shore Power SensorModel: 010-13009-00Monitor the status of your shore power remotely using the OnDeckTM Hub and this sensor. Connect this accessory to an electrical outlet and your OnDeck Hub to get started. Compatible with North America, Europe, U.K., and Australia standard electrical outlets from 100 Vac to 240 Vac.

Read more less

Force™ Round Nose Cone with Transducer Mount - BlackReplace the standard part of your compatible trolling motor or use the nose cone when mounting equipment with traditional clamps.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

USB Cable for GPSMAP® 8400/8600Connect your GPSMAP 8400 or 8600 series chartplotter to a computer¹ using this 15-foot USB cable and a compatible HDMI cable (sold separately). This water resistant and secure connection allows you to touch the chartplotter screen to operate the computer¹, including the ability to see and touch the keyboard on the screen.¹Works with Apple® or Windows® 7, 8 or 10 computers. Apple is a registered trademark of Apple, Inc. Windows is a trademark of Microsoft Corporation in the United States and/or other countries.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cables Box Dimensions: 1"H x 6"W x 7"L WT: 0.45 lbs UPC: 753759143091

Read more less

Field Installable Adapter Kit for Garmin BlueNet™ NetworkUse these field installable connectors to wire a Garmin BlueNet™ network cable that does not have a factory-installed connector. Owner's Manual (pdf)

Read more less

Extension Cable with XID - 12-Pin - 10'Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 1"H x 8"W x 8"L WT: 0.5 lbs UPC: 753759142827

Read more less

NMEA 2000 field installable connector - maleWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male Data Interface: NMEA 2000 Box Dimensions: 1"H x 1"W x 1"L WT: 0.09 lbs UPC: 753759078362

Read more less

20' Marine Network Cable, RJ45WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 20' Box Dimensions: 3"H x 6"W x 9"L WT: 1 lbs UPC: 753759046132

Read more less

20 feet network cable for garmin Network displays and modules.

Read more less

Garmin Field Installable Adapter Kit for the Garmin BlueNetTM NetworkModel: 010-12528-20Use these field installable connectors to wire a Garmin BlueNetTM network cable that does not have a factory installed connector.

Read more less

Garmin 10 foot transducer extension cable For 12-pin XID transducers Model: 010-11617-32 UPC: 753759142827 Extend the cable length of your compatible 12-pin transducer with this 10 feet (3 meters) cable. Supports 12-pin Airmar transducers with XID.

Read more less

Power/data/sonar cable is threaded with a 19-pin connector.

Read more less

Use our male NMEA 2000 field-installable connector to create custom-length drop cables and backbone extension cables. This connector can also be used to shorten any Garmin NMEA 2000 drop/backbone cable.

Read more less

Trolling Motor Power ReceptacleUse this to add a 70A power receptacle to a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor

Read more less

Force® Kraken Transducer Replacement KitEasily remove, replace, or upgrade the built-in Garmin transducer on a compatible trolling motor with this kit. It’s recommended to replace all O-rings and compression seals so the motor returns to its original factory waterproof sealing. The nose cone is not included.Specifications: Color: Black Includes Transducer Replacement Part: Force® Kraken Compatible Devices:Force® Kraken trolling motor

Read more less

Bail Mount with Knobs for GPSMAP® 12x2 SeriesSurface mount your compatible GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.

Read more less

Adapter Plate for GPSMAP® 12x2 to 12x3 SeriesThis adapter bezel kit allows you to install a new GPSMAP 12x3 into the existing cutout of a GPSMAP 12x2 Touch, 12x2 Plus, 7412 or 7612 chartplotter in your dash. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 10"W x 15"L WT: 0.4 lbs UPC: 753759250843

Read more less

Suction Cup with Magnetic Mount f/dezl™780 LMT-S & dezlCam™785 LMT-SMount your compatible device while you navigate with this suction cup mount. The powered magnetic mount charges your device while you drive. Simply suction your mount to the windshield or any smooth, flat surface. Includes suction cup mount and magnetic mount.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Second Station Mounting Kit f/echoMAP™ 70dv/70s, GPSMAP® 741/741xsMount any additional echoMAP™ or GPSMAP® on your boat with this second mounting station. Also includes a wiring harness to power your compatible device and connect to an optional NMEA 0183 network.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

8-Pin Trnasducer Extension Cable- 10'Connect your transducer to your sonar device with this 10'(3M) 8-pin extension cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 1"H x 6"W x 8"L WT: 0.5 lbs UPC: 753759128814

Read more less

Actuator Power Cable10" x 7" x 2" actuator power cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 1"H x 7"W x 9"L WT: 0.65 lbs UPC: 753759968021

Read more less

Garmin Power CableFor Panoptix PS22 or LiveScopeModel: 010-12676-40Connect your PanoptixTM LiveScope System or Panoptix PS22 transducer and compatible ECHOMAP chartplotter to the battery of your compatible Panoptix ice fishing bundle with this power cable. It also includes a convenient charge port plu and 10A fuse holder.

Read more less

Garmin Bail Mount and KnobsFor GPSMAP 12X2 SeriesModel: 010-12545-03Surface mount your compatible GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.

Read more less

Garmin Adapter Plate (GPSMAP(R) 12x2 to 12x3 Series)Model: 010-12993-02This adapter bezel kit allows you to install a new GPSMAP 12x3 into the existing cutout of a GPSMAP 12x2 Touch, 12x2 Plus, 7412 or 7612 chartplotter in your dash.

Read more less

Garmin 10 foot Extension cable for 8-pin transducers Model: 010-11617-50 UPC: 753759128814 Extend your 8-pin transducer cable 10 foot with this cable.

Read more less

Garmin Vehicle Power CableModel: 010-12931-00Power your compatible chartplotter or fishfinder with this 12 V adapter kit. The kit includes a 4-pin power cable and 12 V vehicle power adapter.

Read more less

Garmin Actuator Power Cable Model: 010-11533-00 UPC: 753759968021

Read more less

Garmin Interconnect Cable (Mechanical/Hydraulic with SmartPump)Model: 010-11351-40Use this 5 meter interconnect cable to connect your GHPTM Reactor autopilot CCU (couse computer unit) to ECU (electronic control unit). Includes bare wire connections for alarm and optional Shadow Drive valve. ECU connector includes threaded collar for compatibility with ECU 12 and SmartPump systems.

Read more less