Extension Post f/Cannon Rod Holder - 2-PackFeatures: Extends height of rod holder by 6" Allows forward & backward pivot adjustment Alignment key allows for 360° pivot while holding post securely in place

Read more less

Stainless Steel Backing PlateSpecifically for use with all Mate Series Rod and Cup Holders.

Read more less

RH5931Stainless Steel Backing Plate for 0°, 15° & 30° Medium Rod Holders.

Read more less

Rod Holder Cap & Gasket KitFeatures:Soft Black Flange Gasket with Integral Flip-Up Cap Soft Black Lip Replacement or Upgrade for Older Holders

Read more less

Backing Plate for 70 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and 80 series rod holders. Each size fits all 3 models of the Series.Features Use this backing plate for all 70 series rod holders (53670A, 53670CA, 53671A, 53671CA, 53672A, 53672CA) 316L cast stainless steel 4" x 5-1/4" 4mm thick Use your 1/4" stainless bolts and nuts (hardware not included)

Read more less

Bracket can be mounted on vertical or horizontal surface. Alignment key allows for 360 pivot while holding rod holder securely in place.

Read more less

Medium Rod Holder Backing PlateBacking plate for medium rod holders

Read more less

Replacement Offshore Weld-On Vinyl Insert - Flared - 10-1/2"Replacement Offshore Weld-On Vinyl Insert for 10-1/2" rod holders

Read more less

HX Rod Holder Flag Pole - 54"Features: Gimbal butt makes flying in any rod holder a breeze Made of anodized aluminum Easy to store Fits standard 1-5/8” rod holders 54” Rod Holder Flag Pole Holds 36" x 60" sandbar flag or 20”x24” dive flag

Read more less

XD Flag PoleSpecifications:• 42” Rod Holder Flag Pole• Holds two 12” sandbar flags or one 20”x 24” dive flag• Gimbal butt makes flying in any rod holder a breeze• Made of anodized aluminum• Easy to store

Read more less

Adjustable Deep Drop Lead HolderFeatures: Fits into gunnel rod holder Adjustable angles, 0, 15 and 30 degree Protect your boat and rod holders from damage Perfect for Sword Fishing and Deep Dropping Portable and Storable Anodized Aluminum

Read more less

Wrench for 9" Rod Holder Fastener - ScrewlessFeatures:For 9" Screwless Rod Holder

Read more less

Lipped Insert for 10" Flared Rod Holder - WhiteFeatures: Protective lip protects top of rod holder an also protects your spinning gear For 10" flared rod holder Color: White

Read more less

10" Flared Vinyl Replacement Insert Liner - BlackFor Aluminum Weld-On Rod Holders Features:For 10" Flared Rod Holders

Read more less

Stainless Steel Rod & Cup Holder Threaded Backing PlateThis threaded backing plate is designed to be used with ALL Mate Series Combination Rod and Cup Holders EXCEPT Elite Screw-less.Features: Cast 316L Stainless Steel Access to the underside is NOT required Machine screws included Quick Guide (pdf)

Read more less

Backing Plate - LargeThese stainless steel backing plates are a perfect match for Rupp Rod Holder installations. Securely mounts with regular or large rod holders. Sold individually.

Read more less

NEW - Innovative Trolling System Puts You In ControlAluminum Mounting TrackThis versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy removal and replacement or our track system accessories. Includes Mounting Hardware Owner's Manual (pdf)

Read more less

Universal Backing PlateUniversal backing plate for rod holders

Read more less

340L Nylon Track AdapterFeatures: Enables you to use all Scotty Rod Holders with 3 1/2″ wide track systems Made with glass-filled nylon Fits Bert’s, Trax Tech, etc... Includes stainless steel fasteners

Read more less

Backing Plate for 80 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and 80 series rod holders. Each size fits all 3 models of the Series.Features: Use this backing plate on all 80 series rod holders (53680CA, 53680SA, 53681CA, 53681SA, 53682CA, and 53682SA) 316L cast stainless steel 4-1/4" x 6" 4mm thick Use your 1/4" stainless bolts and nuts (hardware not included)

Read more less

Rod Holder Liner for 2200 Series Rod Holders - WhiteAnti-fungal, high-quality PVC liners that fit into flared-style aluminum rod holders.Features & Benefits: Stylish design Protects reels from being damaged Protects powder-coated rod holders from chipping on edges Tapered for use with F31-2200, F31-2230 and F31-2240 rod holders (sold separately) 3-year limited warranty Specifications: Color: White  Length: 8-5/8"     Outer Diameter: 2-1/2"     Inner Diameter: 1.63 Rod Holder Series: F31-22 Series This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Vinyl Rubber InsertsClamp-On Rod Holder Rubber InsertsOutside diameter is about 1-7/8” or (1.902”) inches.Inside diameter is about 1-5/8” inches.Overall length is 7-1/2” inches

Read more less

RH5160 Dedree Heavy Duty Vinyl Rubber Insert for RH515, RH532, CH110, RH532V, RH532VS/XS

Read more less

RH53130  Degree Heavy Duty Vinyl Rubber Insert for RH530, RH530SS, RH5330, RH530SS/XS, RH575

Read more less

6 Pole Rod Storage Rack with Horizontal or Overhead MountConstructed of extremely durable, high-strength UV-resistant polypropylene. Rods are secured with bungee cord attachment. Installs with twelve #8 FH fasteners (included).Features: For horizontal and overhead installation Includes twelve #8 FH fasteners Specifications: Entire Length of Storage Rack (inch): 15-1/8" Length From One Mounting Side to the Other (inch): 10-7/16" Distance Between Mounting Holes (inch): 1-1/2" Storage Rack Height (From the Base to the Top of the Rack): 3-inches Number of Rod Holders: 6 Fastener: #8 FH Weight: 1.48 lbs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Deck Mount PlateThis adaptable 4" x 3" plate works with Cannon dual axis rod holders, pedestal mount tracks and downrigger pedestal mounts. Plates can be mounted in a variety of locations, and a protective mounting boot lets you avoid sharp edges.Includes mounting hardware Quick Guide (pdf)Owner's Manual (pdf)

Read more less

NEW - Innovative Trolling System Puts You In ControlAluminum Mounting TrackThis versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy removal and replacement or our track system accessories. Includes Mounting Hardware Owner's Manual (pdf)

Read more less

RH5110 degree Medium Duty Vinyl Rubber Insert for RH510, RH527V, RH5112, RH552CB, & RH552XL 

Read more less

Rail MountFor mounting our single axis rod holder, this convenient rail mount attaches to either round or square rails.For 3/4" to 1-1/4"

Read more less

Poly Rod StrapThe Poly Rod Strap is the best designed and highest quality of any rubber rod holding device on the market. These straps are molded of black polyurethane material that will retain its stretch an remain unaffected by sunlight and most chemicals.

Read more less

70 Series Backing Plate for Flush Mount Rod/Cup HolderFeatures: Cast 316L Stainless Steel Distributes pressure evenly over 30 times more surface area than washers

Read more less

Portable Cleat - 15" Tall with 9" CleatFeatures: Constructed of anodized aluminum Perfect for holding a fender at the sandbar, using as an extra cleat, or using as a hose holder while washing your boat 15" Portable Cleat is ideal for transom cross tie Easily stowable, portable, and great for travel Fits standard 1-5/8” rod holders

Read more less

70 Series Wrench for Screwless Rod Holder Installation Crowsfoot WrenchFeatures: For use with 70 Series Screwless Rod Holders Allows for installation in locations with limited space This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

80 Series Wrench for Screwless Rod Holder Installation Crowsfoot WrenchFeatures: For use with 80 Series Screwless Rod Holders Allows for installation in locations with limited space This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

70 Series Socket for Screwless Rod Holder InstallationFeatures: Required for the installation of screwless rod holders Fits 1/2" drive ratchet wrenches This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

9" Backing Plate for Screwless Rod Holders - Stainless SteelFeatures:For 9" Screwless Rod Holder

Read more less

Portable Cleat - 36" Tall with 9" Cleat Features: Constructed of anodized aluminum Perfect for holding a fender at the sandbar, using as an extra cleat, or using as a hose holder while washing your boat 36’ Portable Cleat is ideal for transom cross tie Easily stowable, portable, and great for travel Fits standard 1-5/8” rod holders

Read more less

Flared Vinyl Replacement Insert Liner - BlackFor Aluminum Weld-On Rod Holders Features:For 8-1/2" Flared Rod Holders

Read more less

Stainless Steel Cap for Oval Plastic Rod HoldersFeatures For use with P2030B and P2030W For plastic rod/cup holders with oval top 

Read more less

Allows side/deck mount to attach to rail. Adjustable to fit different diameter rails.

Read more less

Replacement Vinyl Insert - 30° - 9" - BlackReplacement vinyl insert for 9" rod holders

Read more less

Coiled Paddle LeashKeep a paddle close while paddling with the YakGear Coiled Paddle Leash. This new take on a traditional coiled cord leash solves the troubling problem of overstretched coil cord. Made from solid rubber with no wire inside, the leash features a full memory coil that will stretch from 24 inches to 60 inches. The quick connection of the leash to the boat side is a 360-degree nylon swivel hook to any pad eye or accessible seat strap. The paddle is then connected with a durable, 1-½ inch-thick adjustable velcro strap. Paddle is not included.Features: One ounce, 24 in. full memory, coiled paddle leash Connect to a paddle with the fully adjustable velcro strap Connect to the boat with the nylon swivel hook Instructions included 1-year warranty

Read more less

RH52630 degree Medium Vinyl Rubber Insert for RH525, RH525SS, RH5325RH52XS 

Read more less

320 Adaptable Rail Mount for 2" RailFeatures: The 320 rail mount adaptor can be positioned almost anywhere along a 2″ rail Includes a pair of inserts for both 1½” round rails, and the 1¼” square rails Stainless Steel fasteners included Also includes the 241 Side Deck Mount Ideal for Pontoon Boats

Read more less

4" SS Rod Holder Extension Rod holder extenders used to shorten your rod holder to fit your bent butt fishing rod Fits most medium and large rod holders and are 1.51" wide

Read more less

Lipped Insert for 10" Flared Rod Holder - BlackFeatures: Protective lip protects top of rod holder an also protects your spinning gear For 10" flared rod holder Color: Black

Read more less

T-Top Rod Safety Straps - PairBlack

Read more less

109 Backing Plate with Gasket - Anodized AluminumUse with the Smooth Slide Rocket Launcher.

Read more less