Triple Threat™ Rod Holder - Track Mount Base with 6" ExtensionThe Triple Threat™ Rod Holder is the one-stop shop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This TRACK MOUNT Triple Threat™ Rod Holder has a 6 in. extension that can move a span of 245 degrees.Features: The quarter-turn knob allows for easy adjusting of the angle of the rod with a quick twist The rear bail facilitates vertical storage of rods while moving from one location to another Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Box Dimensions: 3"H x 10"W x 13"L WT: 1.2 lbs UPC: 035514330053 Brochure (pdf)

Read more less

Stainless Steel Side Mount Removable Rod Holder Side Mount Rod Holder slides in and out of mounting plate for a lower profile while not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16”. Installs with four #10 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 9" Mounting Style: Side Box Dimensions: 3"H x 6"W x 18"L WT: 1.5 lbs UPC: 035514325783

Read more less

536800S - Flush Mount Rod Holder - 0 Degree - Swivel - 10.5" DeepThe larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. The rod holder has no logo on the cap for a sleek low profile. Technical Specifications: Material - 316L Stainless Steel Angle - 0° Bottom Style - Swivel Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-7/8" Finish: Silver Length (Inches): 10.5" Mounting Style: Surface Box Dimensions: 6"H x 6"W x 16"L WT: 3.2 lbs UPC: 768296011222

Read more less

Aluminum Vertical Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-5/16" Construction: Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010614

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5001GLColor:   GoldFits:      1.050" O.D. PipeMount:  VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Gold Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.75 lbs UPC: 096811500129

Read more less

3-Rod Poly Rod Rack Deluxe Durable polyethylene to withstand the harsh marine environment Flared rod holder for easy rod handling Slotted rod holders lock in most conventional & spinning outfits Deluxe racks feature convenient integrated slots for knife & pliers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Diameter (Inches): 1-3/4" Length (Inches): 18" Box Dimensions: 3"H x 12"W x 18"L WT: 1.6 lbs UPC: 045038543334

Read more less

Adjustable Mid Mount Rod Holder Aluminum 1.66" or 1-1/2" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1.66" or 1-1/2" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Inches): 10" Finish: Polished Diameter (Inches): 1-1/2" Construction: Aluminum Mounting Style: Rail Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010904

Read more less

70 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner - BoxedThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Outer Diameter: 2-1/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296010331 Quick Guide (pdf)

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 1.05" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 11"W x 14"L WT: 1.6 lbs UPC: 768296009694

Read more less

Elite Screwless Stainless Steel 30° Rod & Cup Holder - Drain - Oval Top*Must have access to underneath side of gunwale for installation*Features 316 Stainless with Oval Top 30º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.8 lbs UPC: 857515002261 Quick Guide (pdf)

Read more less

Stainless Steel 15° Rod & Cup Holder - Open - Oval TopFeatures 316 Stainless with Oval Top 15º Rod Angle Open at Bottom Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.4 lbs UPC: 857515002056 Quick Guide (pdf)

Read more less

2-In-1 Non-Adjustable Rod Holders *2-PackThese two rod holders have a fixed vertical angle to optimize rod positioning and a smaller size is perfect for medium and light action gear. Features: Rod throat opening fits most standard and ultra-light rods up to 1-3/16 inches in diameter  The locking ring fits the spinning reel handle shanks up to 7/16-inch diameter Specifications: Mount: Side Color: Black *Includes two-rod holders Quick Guide (pdf)

Read more less

80 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-9/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in. Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296011109 Quick Guide (pdf)

Read more less

80 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-9/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296010836 Quick Guide (pdf)

Read more less

80 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Swivel Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-9/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 15 degrees Bottom Style: Swivel Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in. Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296011048 Quick Guide (pdf)

Read more less

70 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black Liner - BoxedThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Outer Diameter: 2-1/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 11"L WT: 4 lbs UPC: 768296010317 Quick Guide (pdf)

Read more less

30 Degree Standard Swivel Rod HolderThis Rupp standard-size rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 30-degrees  Material: Stainless steel Liner: White Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 4"H x 4"W x 13"L WT: 3 lbs UPC: 784703001259

Read more less

Elite Screwless Stainless Steel 15° Rod & Cup Holder - Drain - Oval Top*Must have access to underneath side of gunwale for installation*Features 316 Stainless with Oval Top 15º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.7 lbs UPC: 857515002254 Quick Guide (pdf)

Read more less

Plastic 15° Rod & Cup Holder - Drain - Round Top - WhiteFeatures ABS Plastic with Round Top 15º Rod Angle Drain at Bottom Specifications: Angle: 15 Degrees Construction: Plastic Finish: White Mounting Style: Gunwale Box Dimensions: 5"H x 5"W x 9"L WT: 0.5 lbs UPC: 857515002278 Quick Guide (pdf)

Read more less

Triple Threat™ Rod Holder Track Mount - Base OnlyThe Triple Threat™ Rod Holder is the one-stop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This is a TRACK MOUNT BASE ONLY for the Triple Threat™ Rod Holder.Features: Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 035514326360 Brochure (pdf)

Read more less

Stainless Steel 90° Flush Mount Rod Holder A value priced, vertical mount rod holder! This Economy 90° Flush Mount Rod Holder with Cap is constructed of formed 304 stainless steel with a plastic liner, mounting gasket, and integral cap. Features a 90° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 8-1/4" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 12"L WT: 1.15 lbs UPC: 035514325929

Read more less

Rod Holder - Heavy Duty - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Surface Box Dimensions: 3"H x 6"W x 14"L WT: 2.6 lbs UPC: 096811530058

Read more less

Stainless Steel Flush Mount Rod Holder with Cap - 90° A high quality, vertical mount rod holder! These 90° Flush Mount Rod Holders are constructed of investment cast 316 stainless steel with a plastic liner, integral cap, and mounting gasket. Features a 90° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 9-5/8" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 1.65 lbs UPC: 035514325967

Read more less

No. 350 Rodmaster IIFibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pinIncludes No. 241 combination deck or side mount.Bolting dimensions: 1 5/16" x 3 3/16"

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 2.375" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 2-3/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.8 lbs UPC: 768296009779

Read more less

Pontoon Square Rail Adjustable Clamp On Rod HolderAll the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices. Our clamp fits 1" to 1-1/4" square rail Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp Angle around the rail is infinitely adjustable Angle to the left or right adjusts in 15 degree increments 9" tall tube with 1-5/8" ID Includes 304 stainless mounting screws and the hex key needed to make the angle adjustment and to tighten the clamp in place.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Rail Box Dimensions: 2"H x 8"W x 13"L WT: 1.9 lbs UPC: 768296008338

Read more less

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D. PipeColor:BlackPipe Size:#5Fits:2.375" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.8 lbs UPC: 096811500587

Read more less

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.050 O.D. PipeColor: BlackPipe Size:#1Fits:1.050" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.7 lbs UPC: 096811500136 Quick Guide (pdf)

Read more less

RH5165Standard Angle 30° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 6-1/2" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 14"L WT: 2 lbs UPC: 096811516519

Read more less

Side Mount Rod Holder - Flat Dark EarthThis flush-mount rod holder can accommodate rods up to 1-5/8" in diameter. Features a 30° angle. Constructed of UV-resistant injection-molded ABS. Installs with three 1/4" FH fasteners (not included).Specifications: Length (inch): 9-3/16" Diameter (inch): 1-5/8" Color: Flat dark earth Fastener (not included): 1/4" FH Weight: 0.40 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Diameter (Inches): 1-5/8" Length (Inches): 9-3/16" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 12"L WT: 0.5 lbs UPC: 035514996167

Read more less

Side Mount Rod Holder - Flat Dark EarthThis side-mount rod holder features an integral, molded-in standoff located on the back of the rod holder. This standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Constructed of injection-molded polypropylene. Installs with two #10 RH fasteners (not included).Specifications: Length (inch): 11-11/16" Diameter (inch): 1-3/4" Length Between Fasteners (inch): 6-1/4" Color: Flat dark earth Fastener: #10 RH Weight: 0.22 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Polypropylene Diameter (Inches): 1-3/4" Length (Inches): 11-11/16" Mounting Style: Side Box Dimensions: 4"H x 6"W x 15"L WT: 0.25 lbs UPC: 035514330046

Read more less

Deluxe Trident Rod Holder Cluster OffsetTACO's strong and durable high-polished aluminum 3-rod holder cluster with an offset is designed to maximize rod placement and usage on your boat. Great for kite fishing or as 3-rod holders in one. Fits all standard gunnel mounts, and rod holders. Features: Durable, welded high polished aluminum construction Three 9-3/4" offset flared rod holders in a trident design Ideal for kite fishing Tube diameter 1-1/2" fits into standard rod holders 1-5/8" diameter Designed to maximize rod placement and usage on boat Packaged in a mesh bag for easy drying if stored wet Round gimbal pin construction to fit today's custom rods Eye strap attachment for safety lanyard and/or de-hooker placement Large 9-3/4" length rod holders to accommodate bigger and heavier rods and reels This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Aluminum Box Dimensions: 5"H x 18"W x 26"L WT: 8 lbs UPC: 630838084851 Brochure (pdf)

Read more less

Stainless Steel Clamp-On Rod HolderStainless SteelType 316PolishedFeatures and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications:Clamp Fits (Outside Diameter):1-11/16" & 1-15/16" O.D. (Pipe)Location:T-Top, Leaning Post & Poling Platform LegRod Holder Inside Diameter: 1-5/8"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Mounting Style: Clamp Box Dimensions: 3"H x 8"W x 12"L WT: 3.6 lbs UPC: 630838022006

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-532VS/XS Large 0°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.7 lbs UPC: 096811513211

Read more less

15 Degree Standard Swivel Rod HolderThis Rupp standard-size rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 15-degrees Material: Stainless steel Liner: White Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 13"L WT: 3 lbs UPC: 784703001273

Read more less

0 Degree Fixed Standard Rod HolderThis Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish.Features:Forged end cap that gives an unbreakable rod supportSpecifications: Angle: 0-degrees Material: Stainless steel Liner: White Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 13"L WT: 2.6 lbs

Read more less

30 Degree Large Fixed HD Rod HolderThis Rupp heavy-duty rod holder is made of 316L stainless steel and is the perfect combination of form and function, with an exclusive forged end cap that gives unbreakable rod support while providing a finished look and mirror-like finish. Large 4" flange and extra deep for heavy-duty use!Features: Forged end cap that gives an unbreakable rod support Large 4 in. flange Specifications: Angle: 30-degrees Material: Stainless steel Liner: White Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.25 lbs UPC: 784703001464

Read more less

0 Degree Large Fixed HD Rod HolderThis Rupp heavy-duty rod holder is made of 316L stainless steel and is the perfect combination of form and function, with an exclusive forged end cap that gives unbreakable rod support while providing a finished look and mirror-like finish. Large 4" flange and extra deep for heavy-duty use!Features: Forged end cap that gives an unbreakable rod support Large 4 in. flange Specifications: Angle: 0-degrees Material: Stainless steel Liner: White Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.3 lbs UPC: 784703001709

Read more less

15 Degree Large HD Swivel Rod HolderThis Rupp large rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 15-degrees Material: Stainless steel Liner: White Size: large Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.85 lbs UPC: 784703001679

Read more less

Stainless Steel 0° Rod & Cup Holder - Open - Round TopFeatures 316 Stainless with Round Top 0º Rod Angle Open at Bottom Specifications: Angle: 0 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.4 lbs UPC: 857515002094 Quick Guide (pdf)

Read more less

Large Stainless Steel Bolt-less Swivel Rod Holder - 0°2020 IBEX Innovation Award Winner.  This patent-pending SWIVEL rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole.  This is the last rod holder you will need on your boat...ever!Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides. These larger diameter rod holders are available at 0° 15° & 30° angles. To be used with the Large Stainless Steel Backing Plates 10-1476-40WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Plastic 30° Rod & Cup Holder - Open - Oval Top - WhiteFeatures ABS Plastic with Oval Top 30º Rod Angle Open at Bottom Specifications: Angle: 30 Degrees Construction: Plastic Finish: White Mounting Style: Gunwale Box Dimensions: 5"H x 5"W x 9"L WT: 0.5 lbs UPC: 857515002131 Quick Guide (pdf)

Read more less

Aluminum Clamp-On Rod Holder - Vertical - 1.315" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.6 lbs UPC: 768296009724

Read more less

Narrow Gunnel Flush Mount Rod Holder - White These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: White Length (Inches): 10" Mounting Style: Flush Box Dimensions: 2"H x 6"W x 14"L WT: 0.3 lbs UPC: 035514326681

Read more less

Single Rod Rigger Part #: 102Our single rod rigger with its machined slots and welded construction offers an affordable side rigger to all fisherman. Constructed from high quality 60 series aluminum and welded gimbal pin, our rod rigger gives the industry a 'HARD' lead to follow.

Read more less

Stainless Steel 0° Rod & Cup Holder - Open - Oval TopFeatures 316 Stainless with Oval Top 0º Rod Angle Open at Bottom Specifications: Angle: 0 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.35 lbs UPC: 857515002124 Quick Guide (pdf)

Read more less

Flush Mount Rod Holder with Stainless Top The look you want at an economical price! This Flush Mount Rod Holder with Stainless Top is constructed of UV resistant injection molded ABS with a stainless steel top cap. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9-1/2" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 0.7 lbs UPC: 035514326384

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 1.66" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.8 lbs UPC: 768296009731

Read more less