Cannon Rod HolderThe Cannon Rodholder features a three-position rod-holding configuration to deliver the fastest baitcast or spinning rod pickup. A rear-position cradle holds baitcasting reels or spinning reels. The middle baitcasting cradle conforms to longer rod butts and shrtens the amount of rod extending through the back of the holder.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Baitcaster/Spinning Rod Holder without Mount Holds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side-mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in a holder with a soft latching strap that snaps over the top.*Comes with no mount, enabling you to choose whichever mount suits your needs separately.

Read more less

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Specifications: Mounting Style: Flush Box Dimensions: 3"H x 8"W x 10"L WT: 1.14 lbs UPC: 022697050144

Read more less

No. 287 7/8" Round Rail MountProvides versatile mounting without having to drill more holes in your boat. Perfect for boats with limited mounting surfaces. Stainless steel fasteners (included) hold this tough mount securely in place. Works with all Scotty post mount rod holdersFits 7/8" round rails.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Plastic 30° Rod & Cup Holder - Drain - Round Top - BlackFeatures ABS Plastic with Round Top 30º Rod Angle Drain at Bottom Specifications: Angle: 30 Degrees Construction: Plastic Finish: Black Box Dimensions: 5"H x 5"W x 9"L WT: 0.5 lbs UPC: 857515002360

Read more less

Heavy Duty Pro Series Rod HoldersThe Pro Series line of molded rod holders takes the Pro Series to the next level with the addition of the Combo Mount. All the Pro-Series unique features you've come to expect, with the ability to mount in multiple configurations.Designed for use with casting and spinning rod holders. Heavy-duty, deep-tooth gear lock securely holds rod holder in mounting base. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Scotty's most popular value priced, positive locking, open style rod holder. It's universal cradle holds almost any reel style and has a front locking ring to prevent rod loss when travelling. Manufactured with fibre reinforced engineering grade nylon, the Powerlock offers strength, resilience and reliability. Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

259Rod Holder Height ExtenderIncrease your odds with easier access to your rod and reel. Extends the height of the rod holder by 6-1/2", allowing for faster access when that fish strikes. Made from super tough re-enforced nylon. Works with Scotty post mount rod holders (except No. 240 Striker)

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

244 Flush Deck MountWith splash coverFor all Scotty post mount rod holdersDimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Bait Caster / Spinning Rod HolderHolds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.Includes No. 241 combination deck or side mount. WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.

Read more less

Aluminum Vertical Clamp-On Rod Holder 1-2/3" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-5/8" Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010638

Read more less

Designed for Muskie, Halibut, Sturgeon, and other big game fish. New stainless steel reinforced post, larger opening with easy lock / unlock ring.The inner support rotates with the rod to instantly remove and "strike" simultaneously. Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

Adjustable Rod Holder ExtenderProvides the option for you to position your Scotty Rod Holder into that perfect fish fighting location. Conveniently position your rod holder closer to you on your kayak or your downrigger to eliminate reaching for your rod. Can be used in conjunction with any previous Scotty Downrigger Boom Mounted Rod Holder to bring the fish fighting action closer to you.Extends the height of a rod holder by 6-1/2"WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Stainless SteelFlush MountSwivel Rod Holders80 Series0°10-1/2" Length1-7/8" ID Swivel base ideal for bent butt rod fishing Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish Cast 1-piece stainless steel swivel cup Super smooth turning precision-machined 1/2" pivot with fine threads WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-7/8" Finish: Polished Length (Inches): 10-1/2" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 16"L WT: 3.05 lbs UPC: 768296006020

Read more less

30 Degree Standard Swivel Rod HolderThis Rupp standard-size rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 30-degrees  Material: Stainless steel Liner: White Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 4"H x 4"W x 13"L WT: 3 lbs UPC: 784703001259

Read more less

Large Stainless Steel Bolt-less Rod Holder - 30°2020 IBEX Innovation Award Winner.  This patent-pending rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing.  Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finishThese larger diameter rod holders are available at 0° 15° & 30° angles. To be used with the Large Stainless Steel Backing Plates 10-1476-40.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.315" O.D. PipeColor:BlackPipe Size:#2Fits:1.315" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.85 lbs UPC: 096811520233

Read more less

Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.315" O.D. PipeColor:WhitePipe Size:#2Fits:1.315" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: White Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.9 lbs UPC: 096811520554

Read more less

Swivel Base Flush Mount Rod HolderMedium, 15 Degree, Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 15"L WT: 2 lbs UPC: 096811530737

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-529HS/XS Medium 15°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 15"L WT: 1.85 lbs UPC: 096811512917

Read more less

Flush Mount Rod HolderRH-530 Large 30° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 14"L WT: 2.6 lbs UPC: 096811513006

Read more less

Flush Mount Rod HolderRH-529HS Medium 15° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 14"L WT: 1.9 lbs UPC: 096811512900

Read more less

Flush Mount Rod HolderRH-532VS Large 0° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.6 lbs UPC: 096811513204

Read more less

Stainless Steel Flush Mount Rod Holder, Standard Series2" Diameter7.5" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability. Polished 316 grade stainless steel tube for corrosion-resistance Gasket Provides water seal around flange Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use U.V. resistant polymer liner protects finish on rod or reel WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Length (Inches): 7-1/2" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 12"L WT: 1.5 lbs UPC: 022697663634

Read more less

ABS Plastic Rod Holder - 3 Rod - Pair with BungeeABS plastic with foam inserts. Holds up to 3 rods and can be installed vertically or horizontally. Foam inserts and a bungee latch. Sold in pairs.

Read more less

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.315 O.D. PipeColor: BlackPipe Size: #2Fits: 1.315" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.8 lbs UPC: 096811500235 Quick Guide (pdf)

Read more less

333 Track Mounted Rod Tree - Rodmaster II Rod HoldersThe 333 Track Mounted Rod Tree is an easy, rock-solid platform for anglers looking to run up to three lines simultaneously.Particularly well-suited for use with in-line planer boards, the 333 is a great way to increase the surface area being fished while keeping each line neatly separated. The vertical design minimizes line-crossing and tangles, and allows for a small footprint, keeping decks clear and well-organized.Built with strong, long-lasting materials, and designed for simple, straight-forward operation.Features: 3 Rod Master ll Rod Holders with removable Gimbal pin design 1¼” Stainless steel tube Front-notch design for rod and reel positioning Engineering-grade reinforced nylon Stainless steel fasteners Adjustable rod holder position allowing maximum spread of rod tips Easy grip T-knob for tightening and loosening 3″ Stainless steel track mount plate Specifications:Rodmaster II Interior Diameter: 1.85″

Read more less

Triple Rod HoldersScotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon.Includes 3 No. 230 Power Lock rod holdersWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

444 Compact Threaded Deck MountFits gunnels up to 2" thick. Secures with no exposed hardware using provided nylon nut.Comes with cap to seal the bottomWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

ORCA Rod HolderThe fastest rod release on any holder on the marketFibre reinforced engineering nylon, offers strength, resilience and reliabilityCompletely adjustable to multiple vertical and horizontal positions400 ORCA Rod Holder with 241L LOCKING push button combination side/deck mount

Read more less

Power LockScotty's most popular value-priced, positive-locking, open style rod holder. Fiber reinforced engineering nylon, offers strength, resilience and reliability.No. 230Includes No. 241 combination deck or side mount Specifications: Construction: Plastic Box Dimensions: 3"H x 7"W x 11"L WT: 1.35 lbs UPC: 062017002309

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

289 R-5 Universal Rod Holder without MountThe R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.  The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod.*Mount sold separatelyFeatures: Easy adjustable lock bar tension Designed and built to withstand all conditions and backed by the Scotty name In the Box:290 R-5 Rod Holder*Sold as an Individual Specifications: Construction: Plastic Box Dimensions: 1"H x 8"W x 10"L WT: 0.65 lbs UPC: 062017002897 Brochure (pdf)

Read more less

290 R-5 Universal Rod Holder w/MountThe R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.  The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod.Features: Easy adjustable lock bar tension Designed and built to withstand all conditions and backed by the Scotty name In the Box: 290 R-5 rod holder 241 Side deck mount *Sold as an Individual Quick Guide (pdf)Brochure (pdf)

Read more less

Innovative compact design, Allows hands free trolling with a fly rod. Fully adjustable and includes a safety strap.Comes with no mount, enabling you to choose whichever mount suits your needs seperately. WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Fully Adjustable rod holder with over 9" of stainless steel jacketed composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features: Heavy Duty Stainless Steel Unique Side or Deck Mounting Bracket Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Locks closed for travelling Includes 241 Combination Side / Deck Mount. To use the new Scotty "lock-down" mount system, simply choose the best direction to fish from and insert the rod holder or accessory, pushing the post straight down into the mount. Can be mounted on top or side of gunnel.Mount Dimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

No 358 Rodmaster IIFibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pinFits 1 1/4" Scotty downrigger booms - clamp on sytleWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Rod Holder R Pontoon Railmount KitIf you love pontoon fishing but don’t want to drill holes in your rails, the RAILBLAZA Rod Holder R Pontoon Railmount Kit is your golden ticket. Designed for light to medium fishing setups, this combo pairs the Rod Holder R’s sleek, simple, and rock-solid holding power with a specialized Pontoon Railmount that clamps straight onto your square pontoon rails—no drilling, no damage, no regrets. The Rod Holder R cradles spinning, baitcasting, and fly rods with a snug fit, and with full adjustability, you can dial in the perfect trolling or casting angle. Whether you’re sneaking up on crappie schools or soaking worms with the grandkids, this lightweight and super-versatile kit is made to keep your rod secure and your hands free. Mount it, fish it, move it when you need to. It’s pontoon fishing the RAILBLAZA way—quick, clean, and built to last.Universal Fit - Designed to fit any size of reel, ensuring versatility for different fishing reels.Material Composition - Made from UV-stabilized fiberglass-reinforced plastic, offering durability and resistance to environmental elementsSecure Rail Mount - Includes a robust rail mount compatible with pontoon rails, providing a secure attachment point.Easy Installation - Comes with stainless hardware for straightforward installation and reliable performance.Integrated StarPort - Compatible with the Railblaza StarPort system, allowing for quick and easy accessory changes.Features: Includes rod holder and pontoon mount. UV-stabilized fiberglass-reinforced plastic. Secure pontoon rail mounting. Adjustable rod holder angles. Stainless hardware included. Specifications: Construction: Fiberglass Finish: Black Mounting Style: Rail Box Dimensions: 3"H x 6"W x 10"L WT: 0.75 lbs UPC: 814162021250

Read more less

15 Degree Standard Swivel Rod HolderThis Rupp standard-size rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 15-degrees Material: Stainless steel Liner: White Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 13"L WT: 3 lbs UPC: 784703001273

Read more less

70 Series Standard Flush Mount Rod Holder - 15 Degree - Stainless Steel - Cast Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water. Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a 1/2 in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 15 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 14"L WT: 2 lbs UPC: 768296011338 Quick Guide (pdf)

Read more less

70 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Gimbal Bar Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning.Features: 316L stainless steel Fits 2-3/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 30 degrees Bottom Style: Bar Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Gimbal Bar: ¼ in. wide x ½ in. tall Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 4"H x 5"W x 14"L WT: 1.75 lbs UPC: 768296011314 Quick Guide (pdf)

Read more less

536810S - Flush Mount Rod Holder - 15 Degree - Swivel - 10.5" DeepThe larger 80 series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. The rod holder has no logo on the cap for a sleek low profile. Technical Specifications: Material - 316L Stainless Steel Angle - 15° Bottom Style - Swivel Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 1-7/8" Finish: Silver Length (Inches): 10.5" Mounting Style: Surface Box Dimensions: 5"H x 6"W x 16"L WT: 3.25 lbs

Read more less

Adjustable Mid Mount Rod Holder Aluminum 1-1/4" or 1-5/16" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1-1/4" or 1-5/6" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Inches): 10" Finish: Polished Diameter (Inches): 1-1/4" Construction: Aluminum Mounting Style: Rail Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010874

Read more less

Aluminum Clamp-On Rod Holder - Vertical - 1.66" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.6 lbs UPC: 768296009748

Read more less

Straight Side Mount Transom Rod or Console Rod Holder 8-1/2"Features: 4 hole 3" x 4-1/2" brushed pad Constructed of cold drawn anodized aluminum WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flush Mount Rod HolderRH-525SS Medium 30° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 14"L WT: 1.8 lbs UPC: 096811512504

Read more less