Cannon Rod HolderThe Cannon Rodholder features a three-position rod-holding configuration to deliver the fastest baitcast or spinning rod pickup. A rear-position cradle holds baitcasting reels or spinning reels. The middle baitcasting cradle conforms to longer rod butts and shrtens the amount of rod extending through the back of the holder.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

No. 287 7/8" Round Rail MountProvides versatile mounting without having to drill more holes in your boat. Perfect for boats with limited mounting surfaces. Stainless steel fasteners (included) hold this tough mount securely in place. Works with all Scotty post mount rod holdersFits 7/8" round rails.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Extension Post f/Cannon Rod Holder - 2-PackFeatures: Extends height of rod holder by 6" Allows forward & backward pivot adjustment Alignment key allows for 360° pivot while holding post securely in place

Read more less

Swivel Base Flush Mount Rod HolderPart #: RH-5367SS Medium 0 Degree Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 15"L WT: 2.05 lbs UPC: 096811530720

Read more less

Baitcaster/Spinning Rod Holder without Mount Holds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side-mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in a holder with a soft latching strap that snaps over the top.*Comes with no mount, enabling you to choose whichever mount suits your needs separately.

Read more less

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Specifications: Mounting Style: Flush Box Dimensions: 3"H x 8"W x 10"L WT: 1.14 lbs UPC: 022697050144

Read more less

Lipped Insert for 10" Flared Rod Holder - BlackFeatures: Protective lip protects top of rod holder an also protects your spinning gear For 10" flared rod holder Color: Black

Read more less

Plastic 30° Rod & Cup Holder - Drain - Round Top - BlackFeatures ABS Plastic with Round Top 30º Rod Angle Drain at Bottom Specifications: Angle: 30 Degrees Construction: Plastic Finish: Black Box Dimensions: 5"H x 5"W x 9"L WT: 0.5 lbs UPC: 857515002360

Read more less

X-Rap® Magnum® 30 Gold Green MackerelThe massive diving-lip takes the X-Rap® Magnums deep… unassisted. Nothing to hinder the action. Each dives to its preset depth…the XRMag10 to 10 feet, the XRM15 to 15 feet, etc. Run up to 13 knots for big game fish worldwide. Features: Deep Diving Lip Models with Colored Lip for Extra Attraction Textured Translucent Body Internal Holographic Foil 3D Holographic Eye VMC® 4X Perma Steel® Hooks 3X Split Rings Big Water Patterns Specifications: Running Depth: 30' Body Length: 6-1/4" Weight: 2-1/2 oz Treble Hooks: Two No. 4/0 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Series: X-Rap Magnum Size: 6.25" Box Dimensions: 2"H x 2"W x 11"L WT: 0.25 lbs UPC: 022677135854

Read more less

Scotty's most popular value priced, positive locking, open style rod holder. It's universal cradle holds almost any reel style and has a front locking ring to prevent rod loss when travelling. Manufactured with fibre reinforced engineering grade nylon, the Powerlock offers strength, resilience and reliability. Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

X-Rap® Magnum® 30 BunkerThe massive diving-lip takes the X-Rap® Magnums deep… unassisted. Nothing to hinder the action. Each dives to its preset depth…the XRMag10 to 10 feet, the XRM15 to 15 feet, etc. Run up to 13 knots for big game fish worldwide. Features: Deep Diving Lip Models with Colored Lip for Extra Attraction Textured Translucent Body Internal Holographic Foil 3D Holographic Eye VMC® 4X Perma Steel® Hooks 3X Split Rings Big Water Patterns Specifications: Running Depth: 30' Body Length: 6-1/4" Weight: 2-1/2 oz Treble Hooks: Two No. 4/0 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Series: X-Rap Magnum Size: 6.25" Box Dimensions: 2"H x 2"W x 10"L WT: 0.25 lbs UPC: 022677135823

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - SeagrassThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Seagrass can cooler  Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

Vertical Mount Rod Holder Holds 4 to 6 rods Mounts vertically in application to hold rods horizontally Molded rubber inserts secure rod butt and tip Holds rod and reels in a crisscross manner, which allows storage of more rods in a smaller space Resists UV rays WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

RH5167VVertical 0° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 6-1/2" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811516526

Read more less

244 Flush Deck MountWith splash coverFor all Scotty post mount rod holdersDimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Downrigger Weight Retriever3025Great helper and safety precaution for the downrigger fisherman. Brings weights in for rigging lines and releases without heavy-duty long-wearing nylon fairlead.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

RH5931Stainless Steel Backing Plate for 0°, 15° & 30° Medium Rod Holders. Specifications: Construction: Stainless Steel Diameter (Inches): 3-1/2" X 4-3/4" X 12ga (0.105") Finish: Polished Box Dimensions: 2"H x 5"W x 8"L WT: 0.5 lbs UPC: 096811590069

Read more less

HydroWave H2 System Package - KVD Kevin Van Dam Signature EditionThe HydroWave KVD H2 is a Marine Audio Device based on the reactive senses of a Bass and other predatory fish. The HydroWave H2 delivers the latest in patented, sound emitting technology, effectively imitating the audible underwater sounds of baitfish and fish-feeding activities. Research has proven these sounds stimulate feeding in game fish. In addition to the 16 sound patterns on the H2 Bass HydroWave, the KVD H2 has 9 additional sound patterns designed by Kevin VanDam for specific fishing situations: Shallow Power Shallow Finesse Vegetation Top Water Schooling Off Shore Structure Off Shore Schooling Off Shore Finesse Marinas/Docks Crawfish WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flush Mount Power PortOur new power port allows for quick thru-hull connection to a Cannon Downrigger Power cable. It quickly connects to the yellow female battery end plug from your downrigger, with no need to cut or splice wires. The watertight cover and gasket shield your downrigger plug from corrosion when not in use.

Read more less

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.

Read more less

Stowaway® 3500™The most recent design among the Plano family, the newly redesigned StowAway® was made with anglers in mind. A single latch design allows for faster opening and closure and includes a large reusable labeling area for further organization. Topping it all off with a transparent lid and additional divider slots for improved configurability, this stow will improve the experience of any angler.Features: Adjustable compartments with rigid pre-cut dividers for simple, quick box setup and adjustments Rustricor™ corrosion-resistant technology helps combat rust and corrosion Single latch design for quick, one-handed opening and secure closure Large and reusable dedicated labeling area Transparent lid for easy content identification Additional divider slots allow for improved configurability and organization Specifications: Exterior Dimensions: 9.13"L x 4.98"W x 1.25"H, 23.19 cm L × 12.65 cm W × 3.18 cm H Compartments: 3-30 configurable compartments WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

ProMix® Braid - 20lb - Low-Vis Green - 300 ydsCapitalizing on pro angler insights, Sufix® ProMix® combines the innate benefits of the premium braid with ultra-longevity, buoyancy, and colorfast technology to culminate a quality of braid like no other. The color injection process provides two times more “Colorfast” retention than competing braids. The densely braided line made with HMPE fibers and high weave count gives consistent quality, uniform diameter (increasing abrasion resistance), and line performance Low stretch offers exceptional lure control, ultimate bite detection, firm hook setting power Superior knot, and shock strength. Multi-purpose braid that excels in freshwater and saltwater applications.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Break Strength: 20 lb. Color: Green Length: 300 yds Series: ProMix Braid Box Dimensions: 1"H x 4"W x 5"L WT: 0.15 lbs UPC: 024777721166

Read more less

Pedestal Tool ComboPedestal Tool Holder, 6-1/2" Fisherman’s Pliers and Super Line Scissors.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

NEW - Innovative Trolling System Puts You In ControlAluminum Mounting TrackThis versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy removal and replacement or our track system accessories. Includes Mounting Hardware Owner's Manual (pdf)

Read more less

259Rod Holder Height ExtenderIncrease your odds with easier access to your rod and reel. Extends the height of the rod holder by 6-1/2", allowing for faster access when that fish strikes. Made from super tough re-enforced nylon. Works with Scotty post mount rod holders (except No. 240 Striker)

Read more less

Dual Fish Bait Bucket with Aerator Built-InFeatures more durable construction and adds a series of innovative lid designs to help you maintain the health of your bait.The Dual Bait Bucket includes a clip-on aerator (#14331) and a storage compartment built-in to the lid for worms or other bait separate from minnows.Features: 1.3 Gallon Capacity Insulated Liner Built-in Compartment Lid Aerator Clip-on Bracket Hose Hole in Lid Lid Housed Aerator Specifications: Width: 1" Length (Inches): 1" Height: 10" Box Dimensions: 10"H x 10"W x 10"L WT: 1.85 lbs UPC: 082271048257

Read more less

3650 ProLatch Stowaway *4-PackA shrink wrapped bulk package of one Plano's most popular utility boxes, the Plano ProLatch Stowaway Utility Box 4-Packs are perfect for guides, professional anglers, or anyone storing and organizing large collections of tackle. These boxes are ideal for use in a wide variety of tackle bags and are the perfect size to fit in tackle storage compartments on many boats. The 3650 size boxes feature 5 fixed storage compartments with adjustable dividers to create up to 18 compartments per box.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Rod Holder Gimbal Mount Fillet Table - 30" Features: Solid one-piece construction for long life and easy maintenance Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage UV stabilized high-density polypropylene construction Large, 30" by 12-5/8" deep with towel bar. UV stabilized, high-density polypropylene Assembles in minutes, with all assembly hardware included Easily accessible knife and pliers holders, large has hose holder and towel bar Knives and pliers not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Width: 30" Box Dimensions: 3"H x 17"W x 34"L WT: 10.2 lbs UPC: 035514326728

Read more less

Performance Lead Core - 27lb - 10-Color Metered - 600 ydsSufix Performance Lead Core is designed with a high-density lead center for excellent sinking speed. It consists of a 10-color sequence with 10 yards per color. Features: Excellent Sinking Speed 10-Colors: 10 yards per color High-Density Lead Dore High Tenacity Polyester Braid WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Break Strength: 27 lb. Color: Metered Length: 600 yds Series: Performance Lead Core Box Dimensions: 5"H x 5"W x 5"L WT: 3.15 lbs UPC: 024777700901

Read more less

Power Grip Plus1179"Stacker" with 30" leaderWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Rod Holder Liner for 2200 Series Rod Holders - WhiteAnti-fungal, high-quality PVC liners that fit into flared-style aluminum rod holders.Features & Benefits: Stylish design Protects reels from being damaged Protects powder-coated rod holders from chipping on edges Tapered for use with F31-2200, F31-2230 and F31-2240 rod holders (sold separately) 3-year limited warranty Specifications: Color: White  Length: 8-5/8"     Outer Diameter: 2-1/2"     Inner Diameter: 1.63 Rod Holder Series: F31-22 Series This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Stainless Steel Backing PlateSpecifically for use with all Mate Series Rod and Cup Holders.

Read more less

Outrigger Bushing KitReplace lost and worn out sleeves and bushings. Kit Contains: Enough Delrin pieces to re-bush a complete pair of Rupp outriggers

Read more less

No. 1023 Tilt-up Mounting BracketIncluded with Scotty Strongarm & Longarm downriggers.For use with all Scotty tilt-up downriggers.Dimensions: 2 1/2" x 4 1/2"Bolting Dimensions: 3 3/4" x 1 5/8"Note: Does not work with 1050 or 1060WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Fishing Rod Sock - 57"This 57" Nylon Rod Sock slides easily over Rods and is secured by an adjustable Velcro strap. Universal Length fits most rods. 

Read more less

Aluminum Vertical Clamp-On Rod Holder 1-2/3" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-5/8" Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010638

Read more less

Outrigger Black Mesh Carry Bag - 72" x 12"Protects outrigger poles from damage! Nylon mesh bag resists moisture and dual pockets prevent outriggers from scratching each other.Features: Protects outrigger poles from damage Nylon mesh bag resists moisture 74" x 12" black mesh Dual pockets prevent outriggers from scratching each other This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Stainless Steel Flush Mount Rod Holder, Standard Series2" Diameter7.5" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability. Polished 316 grade stainless steel tube for corrosion-resistance Gasket Provides water seal around flange Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use U.V. resistant polymer liner protects finish on rod or reel WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Length (Inches): 7-1/2" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 12"L WT: 1.5 lbs UPC: 022697663634

Read more less

Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 80WConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. Specifications: Construction: Anodized Aluminum Finish: Gold Mounting Style: Surface Box Dimensions: 1"H x 4"W x 8"L WT: 0.3 lbs UPC: 096811075504

Read more less

832® Advanced Superline® Braid - 20lb - Hi-Vis Yellow - 150 ydsSufix® 832® Advanced Superline® is the strongest, most durable small diameter braid on the market. R8 Precision Braiding and fiber technology provide superior strength, roundness, and line consistency. 832 Advanced Superline has 8 fibers (7 HMPE fibers plus 1 GORE® Performance Fiber) and 32 weaves (pics) per inch. GORE® Performance Fibers improve abrasion resistance, increase casting distance & accuracy and reduce line vibration. HMPE fibers provide high strength & sensitivity, hydrophobic water-repellent protection, and small diameter.Features: 8 Fibers (Featuring one GORE® Performance Fiber and 7 HMPE Fibers) 32 pics (weaves) per inch R8 Precision Braiding Technology Ultimate Abrasion Resistance Unbeatable Strength Proven Castability Improvements TPG™ Technology Enhances Color Retention WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Break Strength: 20 lb. Color: Yellow Length: 150 yds Series: 832 Box Dimensions: 1"H x 5"W x 6"L WT: 0.15 lbs UPC: 024777675094

Read more less

Optimum™ 10 Tournament Series (TS) BT Electric DownriggerThe Smart, Connected, Electric DownriggerIf you want to put bait on target, you’ve got to fish smarter. The Optimum™ downrigger is positively ingenious. This smart, connected system gives you access to critical trolling data and lets you raise, lower and cycle weights using the full-color LCD display, your Humminbird® fish finder, or even your mobile device. No matter where you are on the boat, you’re in charge. And the fish won’t know what hit them. See It All, Everywhere.Every Optimum has a full-color 3.5" LCD display. Choose from multiple screen view options to get the trolling data you’re after, and two modes (light/dark) for readability in any light.Experience Full Wireless ConnectivityRunning multiple lines is easier than ever, because complicated wiring is a thing of the past. You can network up to four Optimum downriggers wirelessly. Download the AppWith the Cannon® app on your mobile device, you’ll have trolling data at your fingertips and total control of your Optimum downriggers from anywhere on your boat. It even keeps your Optimum software up to date. Experience In-Depth KnowledgeIntegrate with the Fish Hawk™ X4D System (sold separately) to get the true running depth and speed of your weight, the temperature at the weight, plus surface temperature and speed. Enjoy Total ControlThrough the One-Boat Network™, you can view critical trolling information and control your downriggers from anywhere on the boat using the Optimum downrigger display, Humminbird fish finder or the Cannon app on your mobile device. Key Features: Depth Cycling - Seeing fish at a certain depth? Cycle your weights up and down at preset intervals in the strike zone and get ready for action.  Preset Depths - Too busy to notice your depth after a catch? Your Optimum remembers, so you can put bait in that same spot, fast. It stores up to five preset depths, too.  Bottom Tracking - Automatically keep your bait at a preset distance from the bottom.  Positive Ion Control - Create a fish-attracting field of energy by emitting positive ions from your cable. Fully adjustable, so you can dial into a setting that drives fish wild.  Auto Up - With one push of a button, instantly retrieve all your weights at once or one at a time.  Waterline Zero - On retrieval, it automatically stops your weights a set distance below the waterline, so swinging weights won’t damage your boom or your boat.  Additional Features: 250 feet-per-minute retrieval speed is the industry's fastest Five adjustable retrieve and deploy speeds Heavy-duty telescopic boom extends from 24" to 53" Includes two dual axis adjustable rod holders Includes one dual axis adjustable rod holder (TS model only) Easy spool access Includes mounting base and low-profile 360Ëš swivel base Includes composite spool with 400 ft of 150-lb stainless steel cable Includes stainless steel spool with 400 ft of 150-lb stainless steel cable (TS model only) Includes Line Terminator with two Uni-Line Releases Waterproof connections Integrated ball storage hook Includes manual crank handle 20-lb weight capacity Corrosion-resistant construction Limited lifetime warranty Specifications: Boom Length (Inches): 24"-53" Cable Length (Feet): 400' Manual/Electric: Electric Rod Holder Included: Yes Spool Construction: Stainless Steel Swivel Base Included: Yes Box Dimensions: 11"H x 16"W x 24"L WT: 31.45 lbs UPC: 029402046898 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

HG500G 42W - 12V - 3.5A - LED Fishing Light - Green - 24"Hydro Glow Underwater LED Fishing Lights provide a very energy efficient light source to provide a 360-degree light pattern in the water. Each light rod is made of virtually unbreakable construction to meet every need. Enjoy the 80,000 LED average life rating as you lower the green or blue rods into the water off your boat or under the ice to attract fish. Hydro Glow Underwater LED Fishing Lights power cord is designed with a waterproof connector that easily connects to an accessory plug (not included) or to the included alligator clips that hooks onto your existing 12V battery power supply.The 10-watt, 1-foot long light is ideal for ice fishing or shallow water fishing off kayaks and small boats. Great for targeting speckled trout, red, crappie and shrimping. If you are looking for something more versatile, the 20-watt, 2-foot long light is for targeting both freshwater and saltwater fish. For deep-ocean or deep lake fishing use the 4-foot long light to target striped bass, walleye and swordfish.Features: High-Quality Underwater Fishing Lights Effectively Brings Bait Fish to Your Boat Compact Design Fits Boat Compartments Up to 4,000 Lumens, 80,000 LED Average Life Rating Applications:Hydro Glow Fishing Light Rods can be used for ice, boat, kayak, shallow water or deep water fishing in freshwater or saltwater.  Specifications: Watts: 42 Voltage - Input Range (Volts): 12 Color: Green Box Dimensions: 4"H x 4"W x 26"L WT: 2.1 lbs UPC: 814347005020

Read more less

LED Underwater Dock Light - 200W - 50' Cord - GreenThe SF200 underwater dock light features the latest in LED design and technology.  With over 120 lumens per watt the SF200 will maximize underwater illumination, promote energy efficiency and safe operation.The SF200 is designed to be anchored to the bottom at the desired location, shining upward toward the surface.  Each light comes with a 50’ cord.  Extra lengths are optional. The SF200 is perfect for creating great aesthetics around waterfront dining, marking channels or a great look throughout the marina or private dock. Specifications: Color: Green Watts: 200 Box Dimensions: 8"H x 9"W x 13"L WT: 7.1 lbs UPC: 814347002005

Read more less

289 R-5 Universal Rod Holder without MountThe R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.  The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod.*Mount sold separatelyFeatures: Easy adjustable lock bar tension Designed and built to withstand all conditions and backed by the Scotty name In the Box:290 R-5 Rod Holder*Sold as an Individual Specifications: Construction: Plastic Box Dimensions: 1"H x 8"W x 10"L WT: 0.65 lbs UPC: 062017002897 Brochure (pdf)

Read more less

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 2.375" O.D. PipeColor:WhitePipe Size:#5Fits:2.375" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: White Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 2 lbs

Read more less

Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.315" O.D. PipeColor:BlackPipe Size:#2Fits:1.315" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.85 lbs UPC: 096811520233

Read more less

RH53130  Degree Heavy Duty Vinyl Rubber Insert for RH530, RH530SS, RH5330, RH530SS/XS, RH575

Read more less