Universal Line ReleaseIt's truly a "universal" release because it can cover so many different tension settings. It has two adjustment points to allow tension settings from 2 to 22 lb. Perfect for slow trolling with live baits or going after light-hitting walleyes. Tough enough to handle heavy saltwater plugs.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Low-Profile Swivel BaseHeavy-duty Lexan® and stainless steel swivel base. 1 1/8" tall. Six-point locking including two 45-degree positions. Measures 5" x 5" x 1 1/8". For all Cannon downriggers. Includes four 1/4" - 20 x 1 truss head screwsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Waterproof Stowaway® 3700™The most recent design among the Plano family, the newly redesigned Waterproof StowAway® was made with anglers in mind. With the O-ring gasket for enhanced closure, this line offers a waterproof rating that will keep all of your gear safe. A single latch design allows for faster opening and closure and includes a large reusable labeling area for further organization. Topping it all off with a transparent lid and additional divider slots for improved configurability, this stow will improve the experience of any angler.Features: IPX7 Waterproof rating O-ring seal for additional waterproof protection Adjustable compartments with rigid pre-cut dividers for simple, quick box setup and adjustments Rustricor™ corrosion-resistant technology helps combat rust and corrosion Single latch design for quick, one-handed opening and secure closure Large and reusable dedicated labeling area Transparent lid for easy content identification Additional divider slots allow for improved configurability and organization Specifications: Exterior Dimensions: 14"L x 7.25"W x 1.75"H, 35.56 cm L × 18.42 cm W × 4.45 cm H Compartments: 4-64 configurable compartments

Read more less

Shock Cord w/Double Roller (Pair)Our Shock Cord with Double Pulley Block easily attaches to your boat and helps provide consistent tension to the halyard lines. With a double roller system, dual rigging and smooth halyard movement is a snap.Features: 12" of shock cord Shrink wrapped ends Corrosion-resistant hook clasps Sold in pairs 1-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Shock Cord w/Roller (Pair)Make sure your outrigger halyard lines operate without friction by using the TACO Marine Shock Cord with Pulley. This necessary rigging component provides the tension needed and smooth line movement to deploy baits. Features: 12" length, Bungee Shock Cord Smooth roller eye pulley system Corrosion-resistant clasp Sold in pairs 1-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Dacron LineBlack100'The perfect line for rigging outriggers. Dacron provides superior strength with reduced friction to allow smooth operation.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Sidewinder Bolt-On Outrigger MountBelow top operation. Fully locked in Running and 80 degree out Trolling positions. Locks when handle is up or down. Rotates when handle is to the left or right. Fastest Lay-Down on the market. Automatically locks in position when raising or lowering the pole. No knobs to loosen or tighten. Just pull down the Ridged Collar and lower or raise the pole. No ball bearing to rust. Internal Delrin Bushings and Nylon Bearing Surfaces provide smooth operation and prevent metal to metal contact.

Read more less

Universal Backing PlateUniversal backing plate for rod holders

Read more less

Original 10" & 6" Set The Original Rod Saver 10 Inch & 6 Inch Strap is the most popular model.  10" strap for the handle end of the rod and 6" strap for the tips.  Holds up to 6 rods.  Includes stainless steel mounting hardware.

Read more less

Waterproof Stowaway® 3600™The most recent design among the Plano family, the newly redesigned Waterproof StowAway® was made with anglers in mind. With the O-ring gasket for enhanced closure, this line offers a waterproof rating that will keep all of your gear safe. A single latch design allows for faster opening and closure and includes a large reusable labeling area for further organization. Topping it all off with a transparent lid and additional divider slots for improved configurability, this stow will improve the experience of any angler.Features: IPX7 Waterproof rating O-ring seal for additional waterproof protection Adjustable compartments with rigid pre-cut dividers for simple, quick box setup and adjustments Rustricor™ corrosion-resistant technology helps combat rust and corrosion Single latch design for quick, one-handed opening and secure closure Large and reusable dedicated labeling area Transparent lid for easy content identification Additional divider slots allow for improved configurability and organization Specifications: Exterior Dimensions: 10.88" L x 7.25" W 1.75" H, 27.63 cm L × 18.42 cm W × 4.45 cm H Weight: 0.25 lbs (0.2kg) Compartments: 3-39 configurable compartments

Read more less

EDGE™ 3600 Flex Stowaway BoxTackle boxes are an extension of an angler’s brain. Knowing exactly where everything is located and how it can quickly be retrieved is the key to catching more fish. The Plano EDGE™ Flex Series provides the best possible combination of storage and customization in a single tackle box – ever.The Flex Series is the first StowAway to allow the user to customize the internal divider system fully. Created from input from some of the best anglers in the world, the EDGE™ 3600 and 3700 Flex are fully customizable, allowing for literally endless options to personalize for a particular fishing application, technique, lures, species, or trip.The heart of the revolutionary EDGE™ Flex is its proprietary divider system. Each EDGE 3600 or 3700 Flex comes with five 4X Dividers, six 3X Dividers, nine 2X Dividers, and 18 1X Dividers. These interlocking dividers can be configured in any possible configuration to create small or large, short or long and any combination of storage bays. With this flexibility, anglers can store tools, large lures, and soft plastics next to small terminal tackle, weights and hooks in one box. Whether an angler’s focus is bass, crappie, catfish, multispecies, saltwater or freshwater, the EDGE™ 3600 or 3700 Flex allows him or her to create a custom storage space, unlike any other tackle box or system. Every box in the EDGE™ series has Rustrictor, rust-preventing technology molded into the base of the boxes. A Dri-Loc watertight seal and patent-pending, water-absorbing Water Wick desiccant dividers ward off moisture. An innovative EZ label system and a crystal clear DuraView lid make it easy to identify contents quickly. Heavy-duty steel-pin hinges, a one-hand latch, a super durable ribbed base and a lid that lends itself to stacking multiple units make the EDGE™ series the last tackle box you will ever need to buy.Features:                                                         FLEX divider system includes (5) 4X Dividers, (6) 3X Dividers, (9) 2X Dividers (18) 1X Dividers Water Wick™ divider with reusable moisture-wicking packet Dri-Loc® O-ring seal maintains waterproofing when closed Rustrictor™ technology delivers 360 degrees of rust-preventative protection EZ Label™ system for quick identification of contents DuraView™ crystal-clear polycarbonate lid Dimensions of 3600 11” x 7.25” x 1.63” Brochure (pdf)

Read more less

Adjustable Mid Mount Rod Holder - 1-1/4" or 1-5/16" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1-1/4" or 1-5/16" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Powder Coated Aluminum Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-1/4" Box Dimensions: 4"H x 11"W x 13"L WT: 1.55 lbs UPC: 768296010652

Read more less

Pro Model Stretch 14" Single StrapThe Pro Model Rod Savers are designed to keep rods at the ready so they're within easy reach.   The Pro Series is longer than the Original Rod Saver and includes a durable elastic band to accommodate more rods.  Holds up to 8 rods.  Includes a set of stainless steel mounting screws.

Read more less

Waterproof Stowaway® 3500™The most recent design among the Plano family, the newly redesigned Waterproof StowAway® was made with anglers in mind. With the O-ring gasket for enhanced closure, this line offers a waterproof rating that will keep all of your gear safe. A single latch design allows for faster opening and closure and includes a large reusable labeling area for further organization. Topping it all off with a transparent lid and additional divider slots for improved configurability, this stow will improve the experience of any angler.Features: IPX7 Waterproof rating O-ring seal for additional waterproof protection Adjustable compartments with rigid pre-cut dividers for simple, quick box setup and adjustments Rustricor™ corrosion-resistant technology helps combat rust and corrosion Single latch design for quick, one-handed opening and secure closure Large and reusable dedicated labeling area Transparent lid for easy content identification Additional divider slots allow for improved configurability and organization Specifications: Exterior Dimensions: 9.13"L x 4.98"W x 1.25"H, 23.19 cm L × 12.65 cm W × 3.18 cm H Compartments: 3-30 configurable compartments

Read more less

340L Nylon Track AdapterFeatures: Enables you to use all Scotty Rod Holders with 3 1/2″ wide track systems Made with glass-filled nylon Fits Bert’s, Trax Tech, etc... Includes stainless steel fasteners

Read more less

80 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Cast Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-9/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 15 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in. Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 13"L WT: 4 lbs UPC: 768296010843 Quick Guide (pdf)

Read more less

REEL E-Z Rod HandleOffers better rod control while fighting big game fish. Easily adapts to most rods. Can mount the rod handle to the reel by replacing the reel brace underneath. Rod handle has 3 height adjustments depending on the reel. Stainless steel fasteners.

Read more less

Downrigger Pedestal Riser 12" Made from fiber reinforced nylon and stainless steel 2" stainless steel tubing for the ultimate in strength. Designed to be used for all of our downrigger mounts.Plate Dimensions : 5-1/2" x 5-1/2"Bolting Dimensions : 4-1/2" x 3-1/2"WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Power Grip Plus Release Not Rigged - 40 PackPower Grip Plus Release without wire or snap attached.

Read more less

Fully Adjustable rod holder with over 9" of stainless steel jacketed composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom. Main features: Heavy Duty Stainless Steel Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Locks closed for travelling Comes with no mount, enabling you to choose whichever mount suits your needs seperately. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Fully Adjustable rod holder with over 9" of composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features: Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Locks closed for travelling Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

Fibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pin Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

High Performance2401K 300 ft. of 180 lb. testPremium Stainless Steel Downrigger CableComes with:1 Coastlock snap with swivel (No.1153), 3 sleeves, 1 soft stop bumper and 1 stainless steel thimble.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Designed for Muskie, Halibut, Sturgeon, and other big game fish. New stainless steel reinforced post, larger opening with easy lock / unlock ring.The inner support rotates with the rod to instantly remove and "strike" simultaneously. Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

Fully portable mounting option for all Scotty post mount rod holders. Works with a No. 241 combination side/deck mount (included). Made from super tough reinforced nylon.

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

A line release is the critical link between the downrigger and the fishing rod. If it does not preform properly you will loose both valuable fishing time and fish. The fishing line is gripped between the soft pads with variable release tension attained by moving the line in or out of the jaws. The line release is attached to either the weight or the cable.

Read more less

Downrigger Weight Retriever3025Great helper and safety precaution for the downrigger fisherman. Brings weights in for rigging lines and releases without heavy-duty long-wearing nylon fairlead.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Triple Rod HoldersScotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon.Triple Rod Holder Mount Includes Mounting bracketWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Power LockScotty's most popular value-priced, positive-locking, open style rod holder. Fiber reinforced engineering nylon, offers strength, resilience and reliability.No. 230Includes No. 241 combination deck or side mount Specifications: Construction: Plastic Box Dimensions: 3"H x 7"W x 11"L WT: 1.35 lbs UPC: 062017002309

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

Premium-quality DC ReceptacleThe patented Marinco® ConnectPro® Receptacle features unique locking blades with the industry's largest surface-area for maximum surface contact and electrical conductivity.ConnectPro® connections are weather resistant.The marine-grade design includes corrosion resistant, plated-brass electrical components, and a watertight sealing cap.The receptacle has Marinco's exlusive Perma-Lock™ terminals, meaning they virtually never need to be retichtenedAn O-ring seals out moisture while plugged into the receptacle.WARNING: This product can expose you to chemicals including Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

1028Gimbal Mount 9"Fits into a boat's flush mount rod holder. Eliminates drilling holes and permanent mounting of downrigger brackets on boat. Made from welded stainless steel and modified nylon for the ultimate in strength and durability. For use with metal flush mount rod holders.Fits all Scotty downriggers and can be used with No. 1026 Pedestal Swivel MountDimensions: 6 1/8" x 7 1/8" x 9" x 1 1/2"WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Grand Slam 390XL Outrigger MountTACO took all the durable, dependable features of the popular GS-380 and incorporated a more robust gusset and thicker arm to withstand the torque and pressure created when using longer outrigger poles. This base is perfect for the bigger, faster center console boats between 25’ and 40’. Anglers can easily deploy an outrigger’s vertical lift and horizontal rotation from the boat deck in rough seas. Additionally, the GS-390XL comes equipped with our secure pin-locking technology and pairs well with TACO’s Deluxe Aluminum and Carbon Fiber Tele-Outriggers. The GS-390XL has an enlongated base for tops up to 4” thickFeatures: Stronger gusset support and thicker arm for enhanced durability GS-390XL has an enlongated base for tops up to 4” thick Elevation crank handle provides lift from under the T-top Allows for horizontal rotation from under the T-top Offset handle for better hand clearance Cast stainless-steel Type-316L and machined aluminum construction Strong locking head allows perfect positioning Pairs with TACO Deluxe Aluminum or Carbon Fiber Tele-Outriggers Tested and proven quality Sleek appearance 3-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Flush Mount Rod Holder - 15 Degree w/Drain - Black Liner - No LogoFeatures: 316L Stainless steel 1-5/8” Inner diameter Fits 2-3/16” hole diameter Cap size 4-1/2” long x 3-5/8” wide 9” Tube length 1/4” wide x 1/2” tall gimbal bar Cast models feature a 1/2” drain hole The liner runs the full length of the tube

Read more less

Backing Plate for 80 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and 80 series rod holders. Each size fits all 3 models of the Series.Features: Use this backing plate on all 80 series rod holders (53680CA, 53680SA, 53681CA, 53681SA, 53682CA, and 53682SA) 316L cast stainless steel 4-1/4" x 6" 4mm thick Use your 1/4" stainless bolts and nuts (hardware not included)

Read more less

Tournament Fish Cooler BagFeatures: 4 Strong Handles make easy work of transporting a catch of big fish Huge Capacity for the big ones that don't fit in the cooler!! Keeps your catch cool all day preventing weight loss and spoilage. Thick 3/4" closed cell foam insulation all around. Reflective liner helps preserve ice to keep fish cooler longer. Tough marine grade white vinyl exterior. Large corrosion proof zipper. 4 reinforced carry handles allow carry by 1, 2 or even 4 persons. Convenient roll-up design for compact storage until needed, then unrolls to 22" x 70". Includes nylon storage bag.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8". ANGLE: 0° LENGTH: 9" I.D.: 1-5/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 1-5/8" Length (Inches): 9" Mounting Style: Flush Angle: 0 Degrees Finish: Polished Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 14"L WT: 2.1 lbs UPC: 768296005207

Read more less

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place ANGLE: 30° LENGTH: 10-1/2" I.D.: 1-7/8" Specifications: Angle: 30 Degrees Mounting Style: Flush Box Dimensions: 5"H x 6"W x 16"L WT: 3.1 lbs UPC: 768296005573

Read more less

1 Ton Twing BlockThe Twing block features a spring-loaded side opening mechanism for true one-handed rigging, even while wearing sailing gloves. Black anodized aluminum sideplates are edged with robust bumpers to protect the block, topsides, and deck. The sheave is aluminum rolling on a bearing system shared with Harken's existing 2.3T high-load snatch block. Features: Side opening side plate - Easy to rig and remove from sheet Spring loaded button release - Quick one-handed rigging Anti-capsize bar - Keeps sheave aligned on sheet ULC main bearing - Sheave turns smoothly under extreme loading Sideload balls - Carry loads especially when the block is not aligned in light air Thimble at pivot base - Use 1:1 or 2:1 up-down control Machined aluminum inner sideplates - High strength, low weight Soft polyurethane outer side plate bumpers - Protects block and deck Uses: Twing, tweaker control for code zero sheets Can be used as a snatch block when combined with a soft shackle Spinnaker sheet and guy control Specifications: Sheave Ø (mm): 38.5 mm Sheave Ø (in): 1-1/2 in Maximum line Ø (mm): 11 mm Maximum line Ø (in): .43 in Maximum working load (kg): 1000 kg Maximum working load (lb): 2205 lb Breaking load (kg): 2000 kg Breaking load (lb): 4409 lb Owner's Manual (pdf)

Read more less

Depthpower 60" Electric Downrigger w/200lb Test BraidThe most popular Scotty Electric Downrigger, with a boom that telescopes for extra reach and collapses for storage. Makes for a great “big boat” downrigger.PRODUCT OVERVIEW:  Fully adjustable decent speed, lifts 7 lb. weights at 235 ft./min. and 15 lb. weights at 203 ft./min. Spray protected positive-drive depth counter and Kevlar drive belt by Optibelt™ 300 ft. of 200 lb. test, low drag microfilament premium power braid downrigger line (No. 2701) Boom mounted adjustable 358 Rodmaster II Rod Holder Includes Scotty/Marinco™ Plug and Receptacle The lowest amperage draw of any downrigger made with less than 1/3 the battery draw than some of the competition Marine grade stainless steel boom Multi-position auto-stop included (Use 1008 Stopper Beads to stop at any pre-set position) Includes Power Grip Plus Line Release Includes 1023 Tilt-up Mounting Bracket which enables the unit to be tilted and locked in the upright position Includes 1026 Swivel Pedestal Mount with 16 available positions Fully assembled and factory tested with complete saltwater protection Downrigger Boom Length: 36″-60″ telescoping stainless steel boomDownrigger Boom Diameter: 1 1/4″Rod Holder Interior Diameter: 1.85″WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Boom Length (Inches): 36"-60" Cable Length (Feet): 300' Manual/Electric: Electric Rod Holder Included: Yes Spool Construction: Plastic Swivel Base Included: Yes Box Dimensions: 8"H x 13"W x 42"L WT: 21.7 lbs UPC: 062017211060 Brochure (pdf)

Read more less

Rod Holder Liner for 2200 Series Rod Holders - WhiteAnti-fungal, high-quality PVC liners that fit into flared-style aluminum rod holders.Features & Benefits: Stylish design Protects reels from being damaged Protects powder-coated rod holders from chipping on edges Tapered for use with F31-2200, F31-2230 and F31-2240 rod holders (sold separately) 3-year limited warranty Specifications: Color: White  Length: 8-5/8"     Outer Diameter: 2-1/2"     Inner Diameter: 1.63 Rod Holder Series: F31-22 Series This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

15' Telescoping Outriggers 1-1/2" DiameterTelescopes to less than 6 feet for bridge clearance, trailering and storage. Designed for universal use with Grand Slams, Sport Slams, Striker Bases, and other brands of mounts that accept 1-1/2" butt end diameter outriggers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Anodized Aluminum Diameter (Inches): 1-1/2" Finish: Silver/Silver Length (Feet): 15' Box Dimensions: 6"H x 9"W x 75"L WT: 13.5 lbs UPC: 630838011772 Brochure (pdf)

Read more less

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 1.900" O.D. PipeColor:WhitePipe Size:#4Fits:1.900" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: White Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.85 lbs UPC: 096811500570 Quick Guide (pdf)

Read more less

Vinyl Rubber InsertsClamp-On Rod Holder Rubber InsertsOutside diameter is about 1-7/8” or (1.902”) inches.Inside diameter is about 1-5/8” inches.Overall length is 7-1/2” inches

Read more less

Swivel Base Rod HoldersRH570Stainless Steel Side Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Bulkhead Box Dimensions: 5"H x 6"W x 13"L WT: 3.3 lbs UPC: 096811517004

Read more less

RH5160 Dedree Heavy Duty Vinyl Rubber Insert for RH515, RH532, CH110, RH532V, RH532VS/XS

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-530SS/XS Large 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.7 lbs UPC: 096811513013

Read more less