Service Kit F6B-9Impeller is the same as size as 09-812B 12 Blade , width: 1.9" (49.2mm) Diameter: 2-1/4" (57.1mm)

Read more less

Ultima SwitchNew digital technology uses the Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by water and fluids. Detector cells are totally sealed, are never in contact with the water, will not corrode and are not affected by oil or foreign debris.ULTIMA activates at a 50 mm (2") fluid level and deactivates at a 20 mm (3/4") fluid level. A 3 second delay prevents false starts. ULTIMA switch is rated to handle all Johnson Pump submersible pumps pumps up to 20 amps at 12 or 24 volts.Features: No moving parts Totally sealed solid state electronics and field detectors No mercury No exposed sensors eliminate corrosion possibilities Unique 3-way switch disables piezo alarm while keeping warning LED lit Environmentally sensitive Specifications: Volts: 12v Type: Switches Box Dimensions: 3"H x 6"W x 9"L WT: 0.3 lbs UPC: 729321363037 Owner's Manual (pdf)

Read more less

Aqua O2 Twin Port 500 GPH Aerator Pump - Flex Mount - 12VJohnson Pump cartridge aerator pumps offer ease of convenience and years of reliable service. This pump has an improved design with an easy-to-change/replace motor cartridge.Features: All Aqua O2 Cartridge Aerator Pumps offer the convenience of using only one intake for both the livewell and washdown pump Includes a 3/4 NPT seacock inlet High-flow impeller design Quick-change motor connection 360-degree pump discharge rotation Switchless automatic bilge pump with low-amp resistance monitoring Durable thermoplastic housing design commonality with removable motor cartridge Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings Upgradable motor cartridge Dual-port inlet Benefits: Heightened efficiency and an increased flow rate Enjoy quick and hassle-free cartridge motor changes or capacity upgrades Reorient discharge in any direction The common body allows interchangeable motor cartridge replacement in the same or different size Corrosion-resistant and extended life Allows single transom intake for dual intake pump application Can increase or decrease capacity according to the environment and flow needed Choose the correct intake for the application Competitive Advantages: The most efficient and highest flow in the GPH capacity category Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires Unmatched versatility for ease of installation Specifications: Pump Size: 500 GPH Capacity Straight (12V): 585 GPH (37 I/min) Voltage: 12V Amp: 2.7A Fuse: 3.5A Hose Connection: 3/4 in. Wire Size: 16 GA, TINNED Weight: 9.6 oz  Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Specifications: Gallons Per Hour: 500 GPH Inlet Style: Seacock Volts: 12v Box Dimensions: 3"H x 5"W x 8"L WT: 1.2 lbs UPC: 7330717017835 Quick Guide (pdf)

Read more less

Cartridge Bilge Pumps 1000 GPHThe 1000 GPH incorporates some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. We have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve.Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel.CE-approvedFeatures: Compact, all-in-one motor/impeller unit No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Capacity 3 ft (0.9 m) head (13.6 V): 50 l/min - 800 GPH Capacity Straight: 63 l/min - 1000 GPH Amperage: 3.2 A Fuse Size: 5 A Connection: 3/4" Max Height: 112 mm - 4.4" Weight: 0.27 kg - 9.6 oz. Specifications: Gallons Per Hour: 1000 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 4"H x 6"W x 8"L WT: 0.9 lbs UPC: 729321329033 Owner's Manual (pdf)

Read more less

Spare Motor for CartridgeUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Specifications: Type: Replacement Motors Box Dimensions: 4"H x 6"W x 8"L WT: 0.7 lbs UPC: 729321285124

Read more less

Aqua Void Auto Bilge Pump Replacement Cartridge Motor - 500 GPHThis replacement cartridge can be used to upgrade the output of a pump or to simply replace an Aqua Series bilge pump.Features: 500GPH auto replacement motor for Aqua Void Auto Bilge pumps only Simple, two-handed twist and pull operation to remove and replace the motor cartridge No tools required Specifications:Pump Size: 500 GPH Specifications: Type: Pumps/Drives Box Dimensions: 3"H x 3"W x 6"L WT: 0.8 lbs UPC: 7330717015251

Read more less

Coiled Wash Down Hose - 25' - 1/2" DiameterFeatures: Parable with all Aqua Jet Washdown Pumps 25' hose length 1/2" hose diameter Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 5"W x 18"L WT: 1.9 lbs UPC: 729321106153

Read more less

Proline Bilge Pump500 GPH w/DuraPortsCapacity 3' (0.9M) head (13.6V):33 L/M - 525 GPH Capacity Straight (13.6V): 40 L/M - 630 GPHAmperage:2.5AFuze Size:5AConnection:3/4" Specifications: Gallons Per Hour: 500 GPH Operation: Automatic Volts: 12v Type: Electric Box Dimensions: 4"H x 6"W x 7"L WT: 0.85 lbs UPC: 729321225021

Read more less

Proline Bilge Pump750 GPH w/DuraPortsCapacity 3' (0.9M) head (13.6V):44 L/M - 700 GPH Capacity Straight (13.6V): 50 L/M - 800 GPHAmperage:3AFuze Size:5AConnection:3/4" Specifications: Gallons Per Hour: 750 GPH Operation: Non-Automatic Volts: 12v Type: Electric Box Dimensions: 4"H x 6"W x 8"L WT: 0.9 lbs UPC: 729321227025

Read more less

 Talulah High Flow Ballast Pump Impeller KitFor the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced. A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Read more less

Service Kit F4B-8 -9Johnson Pump Service Kit specifically for F4B-8 and F4B-9.

Read more less

Spare Motor for CartridgeUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Specifications: Type: Replacement Motors Box Dimensions: 4"H x 6"W x 8"L WT: 0.7 lbs UPC: 729321285728

Read more less

Aqua Void 800 GPH Bilge Pump - 12VWith its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.Experience the Industry-First Quick-Change Motor ConnectionJohnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.Take Control of the Boating Experience with Unparalleled ConvenienceThe Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.Enjoy Enhanced Efficiency and Higher Flow RatePowered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.Trust in Reliable Performance Under Demanding ConditionsJohnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!Features: Heightened efficiency with an increased flow rate - high-flow impeller design  Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires Water-cooled motor for long service intervals Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve Meets the international standard, ISO 8849 marine Molded T-Slot - Easy Installation with Switches Specifications: Pump Size: 800 GPH Capacity Straight (12V): 795 GPH (50 I/min) Voltage: 12V Amp: 3.7A Fuse: 5A Hose Connection: 3/4 in. Wire Size: 16 GA, TAC Weight: 12.6 oz (0.36 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm) Specifications: Gallons Per Hour: 800 GPH Operation: Non-Automatic Outlet Size: 3/4" Type: Pumps/Drives Volts: 12v Box Dimensions: 4"H x 5"W x 6"L WT: 1.1 lbs UPC: 7330717015152 Quick Guide (pdf)

Read more less

Impeller Kit 9-45700RTake good care of the cooling system - change to a new impeller every year!

Read more less

Cartridge Motor - 500GPH - 24VUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Heavy-duty motor with stainless steel shaft for 500 GPH pumps, 24V. Featrues: 24V, 500GPH replacement/spare motor cartridge for Johnson bilge pumps Upgrade the output of the bilge pump in a few minutes by simply replacing the cartridge Cleaning debris from the impeller has never been simpler or easier

Read more less

Take good care of the cooling system - change to a new impeller every year!The impeller is a very important security device. Its task is to pump the water through the cooling system of the engine. But remember that the impeller should be replaced every year. And always make sure you get a Johnson Pump Brand original impeller. Then you'll know it matches your pump exactly.65mmWidth 50,2 mmImpeller article number 09-1028BNeoprene (for cooling)Replaces Jabsco 17937-0001 Europe & USA Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Wash Down Control - 12V - 2-Way On/OffSwitch panel that gives full control of your equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with the automatic bilge switches or the electronic float switch. The three-position switch panel in matt black finish has an integrated fuse holder and operating light. Fuses are not included.Features: Enables automatic bilge pumping Matte black finish 12-Volt 2-way on off controls Fuses not included

Read more less

Talulah Ballast Pump Impeller Kit A worn or damaged impeller can cause system failure or engine breakdown. SPX's Johnson Pump brand impellers are developed and manufactured for maximum flow and long life. With a genuine spare impeller you can also be sure that you are getting the quality required by engine manufacturers and professionals.

Read more less

Wash Down Flexible Hose - 25'Features: Expandable X-hose flexible hose Easy to use, portable, folds up after use, easy to stow away Handles wash down pump pressure Size: 25' Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 9"W x 12"L WT: 0.7 lbs UPC: 729321218887

Read more less

Aqua Void 500 GPH Bilge Pump - 12VWith its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.Experience the Industry-First Quick-Change Motor ConnectionJohnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.Take Control of the Boating Experience with Unparalleled ConvenienceThe Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.Enjoy Enhanced Efficiency and Higher Flow RatePowered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.Trust in Reliable Performance Under Demanding ConditionsJohnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!Features: Heightened efficiency with an increased flow rate - high-flow impeller design  Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires Water-cooled motor for long service intervals Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve Meets the international standard, ISO 8849 marine Molded T-Slot - Easy Installation with Switches Specifications: Pump Size: 500 GPH Capacity Straight (12V): 600 GPH (38 I/min) Voltage: 12V Amp: 2.7A Fuse: 3.5A Hose Connection: 3/4 in. Wire Size: 16 GA, TAC Weight: 11.2 oz (0.32 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm) Specifications: Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" Type: Pumps/Drives Volts: 12v Box Dimensions: 4"H x 5"W x 5"L WT: 1 lbs UPC: 7330717015114 Quick Guide (pdf)

Read more less

Bulkhead FittingPart #: 09-10616Johnson Bulkhead Fitting for 3/4" hose

Read more less

400 GPH 12V Bilge Pump - Barbed PortA small, price-wise alternative in the submersible bilge family. The low-cost choice for boat owners who do not want to forsake quality.Features: Capacity straight (13.6V/27V): 30 I/min. - 475 GPH Voltage: 12 V DC Amperage: 2.5A Fuse Size: 3 A Connection: 3/4" Max height: 100mm - 4" Weight 0.35kg - 12oz CE-Approved Barbed Port Specifications: Type: Electric Box Dimensions: 4"H x 4"W x 5"L WT: 0.7 lbs UPC: 729321214056

Read more less

Spare Motor for Cartridge - 12voltUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Specifications: Type: Replacement Motors Box Dimensions: 3"H x 6"W x 8"L WT: 0.6 lbs UPC: 729321285520

Read more less

Aerator HeadOverall length 10-1/2", 3/4" barb, shut off valve w/bracketSpray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.

Read more less

18" Hand Pump with HoseManual 8 Stroke Piston Utility Pump with 18" Hose by Johnson Pump. Light tough durable easy handling, extra fast pumping hand pumps are ideal stow aboard. Comfortable handle grip and extra-large capacity make manual pumping somewhat less of a chore. Ideal for emergency pumping and where electrical current is not available.

Read more less

Aqua Series 500 GPH Replacement Cartridge MotorThis replacement cartridge can be used to upgrade the output of a pump or to simply replace existing Aqua Series pumps. Features: 500GPH replacement motor for Aqua Void Bilge and Aqua O2 Aerator pumps Simple, two-handed twist and pull operation to remove and replace the motor cartridge No tools required Specifications:Pump Size: 500 GPH Specifications: Type: Pumps/Drives Box Dimensions: 3"H x 3"W x 5"L WT: 0.6 lbs UPC: 7330717015220 Quick Guide (pdf)

Read more less

Automatic Switch AS888For full automatic bilge pumping operation, connect the automatic switch to your bilge pump. The AS888 automatic switch has a time-proven micro switch without mercury. When water exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. The AS888 attaches to any SPX Johnson Pump Marine bilge pump through the clip on "T-slot" and can be used with 6, 12, 24 or 32 V systems. Use AS888 for a better and safer life afloat!

Read more less

Puller for Impeller 1028BTThe Johnson Pump 09-47165-01 Impeller Puller is constructed for easy removal of 09-1028BT impellers from the F7 impeller pump. Impellers should be changed yearly to ensure the engine cooling system remains effective. Features: Makes removing 09-1028BT impellers easy Impellers should be changed yearly

Read more less

Spray NozzleFeatures: Aqua Jet Spray Pistol Replacement Compatible with either the 3.5 or the 5.2 Wash Down Pump Kits Constructed out of heavy duty plastic Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 7"W x 7"L WT: 0.3 lbs UPC: 729321913034

Read more less

Pump Cover - Shower SumpClear Cover for Shower Sump Pump Specifications: Type: Misc Box Dimensions: 1"H x 8"W x 8"L WT: 0.4 lbs UPC: 729321031042

Read more less

KlickTite 2 x 90 - 3/4" HoseAllows draining of the system quickly and effortlessly. 

Read more less

Transom Shims

Read more less

Thru-Hull Connector - 3/4" - 90° - White90 Degree Thru-Hull Connector - When looks are important, these are the 90 degree fittings to use. The outside nut is secured to the threaded shaft with a deck plate key. There no threaded section protruding through the head or in need of sawing so its always a neat, finished installation. Features: Outside nut is secured to the threaded shaft with a deck plate key No threaded section protruding through the head or need for saws Makes for a neat, finished installation Built with Johnson Pump quality

Read more less

Fresh Water Filter Strainer Cover with O-Ring AssemblyFeatures: Strainer Cover For filters used with freshwater pumps

Read more less

Thru-Hull Nut Aerator - Straight/90°Specifications: Thru-Hull Straight/90° Nut Aerator

Read more less

Discharge Port - 1-1/4"Features: 1-1/4" Discharge Port

Read more less