Stern thruster tunnel kit for 185TT thruster. Thruster sold separately.

Read more less

Lewmar V700 Verticle Anchor Windlass12v, 6/7mm gypsyModel: 6670011108-312UPC: 743683302930 The V700 now comes with a gypsy able to accept both 6mm and 7mm (1/4) inch chains. Fits calibrated chains: 6mm DIN766, 1/4" G4 or BBB, 7mm DIN766 100% 316 stainless steel deck unit IP Rated Housing Fall Safe anchor lock Fast line speed Manual recovery option Impact-resistant motor cover For boats up to 10.5m (35 ft) With 100% 316 stainless steel housing and a sleek flush-mount design that hides the motor down below, the V700 is one of the most attractive and durable windlasses on the market. It works at the push of a button and has two built-in features that make it unique motor protection and anchor lock. Plus its affordable.Specifications Motor Power draw 320 watts Max pull 700lbs Workign Load limit 175lb Max line speed 82 ft/min Typical line speed 50 ft/min Input Voltage 12v Dimensions 7.34" L x 5" W x 11 1/16" H What's in the Box: V700 Windlass Breaker/Isolator Control Switch Intelligent Mounting Studs, Washers and Nuts All-in-one Installation Wrench & Clutch Lever Base Gasket Seal Safety Instructions Mounting Template Instruction Booklet Warranty Registration Card

Read more less

30ST EVO® Self Tailing Winch Alloy - GreyAn evolution of the renowned Lewmar Ocean winch, the EVO® Self-Tailing Winch draws on a wealth of design and manufacturing experience to produce a state-of-the-art winch. Features: Easy Servicing – no tools required User-friendly direction arrows Technical Specifications: Drum Diameter - 2.91" Base Diameter -  5.43" Height - 5.74" Line entry - 2.72" Line size: - .25" - .5" Gear Ratio 1st Gear - 2:1 Gear Ratio 2nd Gear - 4:2:1 Power Ratio 1st Gear  - 13.8:1 Power Ratio 2nd Gear - 29:2:1 SWL - 1510lbs Weight - 9.2lbs In the Box: Winch Instruction manual *Sold as an Individual Owner's Manual (pdf)

Read more less

30ST EVO® Self Tailing Winch Alloy - BlackAn evolution of the renowned Lewmar Ocean winch, the EVO® Self-Tailing Winch draws on a wealth of design and manufacturing experience to produce a state-of-the-art winch. Features: Easy Servicing – no tools required User-friendly direction arrows Technical Specifications: Drum Diameter - 2.91" Base Diameter -  5.43" Height - 5.74" Line entry - 2.72" Line size: - .25" - .5" Gear Ratio 1st Gear - 2:1 Gear Ratio 2nd Gear - 4:2:1 Power Ratio 1st Gear  - 13.8:1 Power Ratio 2nd Gear - 29:2:1 SWL - 1510lbs Weight - 9.2lbs In the Box: Winch Instruction manual *Sold as an Individual Owner's Manual (pdf)

Read more less

Lewmar VX1 verticle Windlass with 6/7mm Gypsy 300 Watt Motor Model: 69100030 VX1- Robust worm wheel gearbox IP67 cover as standard Stylish stainless steel and composite construction Same footprint as V1 model During 2015, Lewmar undertook an aggressive development program to renew its market-leading vertical windlass range. Their engineering team is continually exploring, evaluating and testing new materials to ensure we offer cutting edge products that are lighter, stronger and optimised for best performance. The VX1 is the first in the expansive new range of windlass. Using a new product development team solely working on new ways to design, develop and manufacture, Lewmar has been able to offer new age technologies to refine our windlass design. This makes our VX range lighter, stronger & more efficient than any competitor on the market. Specifications Max Pull 400 Kg Working Load 100 Kg Max Line speed 25 meters minute What's in the Box: Windlass 50Amp breaker Contactor Guarded rocker switch

Read more less

V700 Vertical Windlass - 12V (Windlass only)With 100%  316 stainless steel housing and a sleek flush-mount design that hides the motor down below, the V700 is one of the most attractive and durable windlasses on the market.  It works at the push of a button and has two built-in features that make it unique - motor protection and anchor lock. The V700 comes with a gypsy able to accept 1/4 inch chains.*Does not include contactor or circuit breaker.  Windlass ONLY. Features: For rope, chain, or combination rodes  Built-in motor protection and fail-safe anchor lock Easy installation Fast line speed Manual recovery option Impact-resistant cover Technical Specifications: Material - Stainless Steel Maximum Pull - 700lbs Maximum Line Speed - 82'/min Maximum Chain Size - 1/4" Maximum Rope Size - 1/2" Power - 12 V Maximum Boat Length - 35' Mounting Position - Vertical Weight - 14lbs In the Box: Windlass Instruction manual *Sold as an Individual  Specifications: Chain - Diameter (Inches): .25 Freefall: Yes Rope Diameter (Inches): .5 Vertical/Horizontal: Vertical Box Dimensions: 6"H x 8"W x 15"L WT: 20 lbs UPC: 743683303036 Owner's Manual (pdf)

Read more less

Lewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.

Read more less

The Lewmar 'Wavespring' self-tailer combines their renowned and gentle wave grip feature with self adjusting springs. It handles today's smaller diameters, as well as the traditional larger Dacron composite ropes. A sleek, minimum-friction feeder arm provides absolute snag-free operation. Mounting Instructions 5 x M6 (1/4 in) c'sk head screws on 94mm (3 11/16 in) PCD. Lewmar recommends that the rope enters onto the drum at an angle of 5 to 10 to the base axis of the winch. To achieve this angle it may be necessary to use a base wedge when installing the winch. This product is Made to Order. Specifications Gear Ratio Power Ratio Weight(lb) 2:1 15.8:1 8.6 Dimensions Drum Diameter D(in) Base Diameter B(in) Height H(in) Line Entry L(in) Line Size(in) 2 9/16 4 3/4 5 3/4 2 5/16 5/16-1/2

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4"). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1" Flange Smoke Grey 17.6 1/2 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 22 5/8 22 5/8 1 11/16 3 3/16 14 7/16 19 15/16 19 15/16 1 11/16

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4"). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Flat base hatches cannot be used with Trim kits or Roller shades Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Flat Base Smoke Grey 17.6 1/2 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 22 5/8 22 5/8 1 11/16 3 3/16 14 7/16 19 3/4 19 3/4 1 9/16

Read more less

Pro-Sport 550G Horizontal Windlass Kit - 12VLewmar’s Pro-Sport windlass is designed as an economical package for rope and chain applications, without compromise on quality or performance. Pro-Sport is designed around a highly efficient spur gearbox, using smaller, more powerful permanent magnet motors. Its rugged aluminum center case and durable composite side covers make Pro-Sport the perfect choice.  Complete with push-button control, anchoring has never been easier. Features: Low power consumption / current draw Dual direction powered operation Convenient above-deck installation Manual freefall DIY ready Technical Specifications: Chain Size - 1/4" G4 or BBB Rope Size - 1/2" 3-strand or 8-plait Motor Voltage - 12 Volt DC Motor Power - 150 Watt Maximum pulling power - 550lb (250kg) Maximum Working Load - 137lb (62.12kg) For boats up to 28' (9M) In the Box: Windlass Base gasket Mounting hardware Circuit breaker Contactor Rocker switch Instruction manual  *Sold as an Individual Owner's Manual (pdf)

Read more less

Stern thruster tunnel kit for 140TT thrusters. Must purchase 140TT thruster separately.

Read more less

Lewmars EVO™ Winch Range evolution from the renowned Ocean winch. Features Easy Servicing - No tools required User friendly direction arrows All the benefits of the EVO™ range Convertable to electric Notes:Mounting Instructions 5 x M6 (1/4 in) c'sk head screws on 94mm (3 11/16 in) PCD

Read more less

Lewmar Pro-Sport 550G Horizontal Windlass mm-7mm-1/4" Gypsy Model: 6656811967-303 UPC: 743683306471 Powerful motor providing superior line speed Low power consumption / current draw Dual direction powered operation Maximum pulling power: 250kg (550 lb) Convenient above-deck installation For boats up to 9m (28ft) Lewmars Pro-Sport rope/chain windlass is designed as an economical package for rope and chain applications, without compromise to quality or performance. Pro-Sport is designed around a highly efficient spur gearbox, using smaller, more powerful permanent magnet motors. The unit has manual freefall and two gypsy sizes to choose from. It is DIY-ready and easy to install. Its rugged aluminum center case and durable composite side covers make Pro-Sport the perfect choice. Complete with push-button control, anchoring has never been easier. Specifications Chain Size 1/4" G4, 1/4" BBB, 7mm DIN 766 Rope 12mm 3-strand and 8-plait Input Voltage 12v Dimensions 8 7/16" L x 7 1/8" W x 5 5/8 H What's in the Box: Windlass Base gasket fast mounting studs Installation Wrench Toggle switch Circuit Breaker

Read more less

The Lewmar 'Wavespring' self-tailer combines their renowned and gentle wave grip feature with self adjusting springs. It handles today's smaller diameters, as well as the traditional larger Dacron composite ropes. A sleek, minimum-friction feeder arm provides absolute snag-free operation. Mounting Instructions 5 x M6 (1/4 in) c'sk head screws on 94mm (3 11/16 in) PCD. Lewmar recommends that the rope enters onto the drum at an angle of 5 to 10 to the base axis of the winch. To achieve this angle it may be necessary to use a base wedge when installing the winch. This product is Made to Order. Specifications Gear Ratio Power Ratio Weight(lb) 2:1 15.8:1 6.4 Dimensions Drum Diameter D(in) Base Diameter B(in) Height H(in) Line Entry L(in) Line Size(in) 2 9/16 4 3/4 5 3/4 2 5/16 5/16-1/2

Read more less

Panel mount AutoAnchors. Suitable for DC electric windlasses using all-chain or rope/chain rode and hydraulic or AC powered windlasses using all-chain rode. It works with the Lewmar prefitted reed switch sensors It has additional diagnostics to help troubleshooting the windless Large LCD display shows at a glance how much anchor is out "One touch" automatic function deploys and retrieves a preset length of anchor rode Docking alarm and pre-set stopping point help protect the boat during anchor retrieval Adjustable red backlighting ensures clear night operation Choice of feet or metres rode measurement Safety lock reduces unwanted windlass operation Easy installation and set up Install up to 2 units on the boat Weather cover to protect the console unit Console colour grey

Read more less

Lewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.

Read more less

Lewmars EVO™ Winch Range evolution from the renowned Ocean winch. Features Easy Servicing - No tools required User friendly direction arrows All the benefits of the EVO™ range Convertable to electric Notes:Mounting Instructions 5 x M6 (1/4 in) c'sk head screws on 94mm (3 11/16 in) PCD Part Number Model Finish Gear Ratio 1St Gear Ratio 2nd Power Ratio 1st Power Ratio 2nd SWL Weight lbs Drum Dia Inch Base Dia Inch Height Inch Line Entry inch Line Size inch 49515055 15ST Alloy Black 2:1 15.8:1 1257 6.4 2 9/16 4 3/4 4 11/16 2 5/16 5/16-1/2 49515057 15ST Alloy Grey 2:1 15.8:1 1257 6.4 2 9/16 4 3/4 4 11/16 2 5/16 5/16-1/2 49515056 15ST Chrome Bronze 2:1 15.8:1 1257 8.6 2 9/16 4 3/4 4 11/16 2 5/16 5/16-1/2 49530055 30ST Alloy Black 2:1 4.2:1 13.8:1 29.2:1 1510 9.2 2 15/16 5 7/16 5 3/4 2 11/16 5/16-1/2 49530057 30ST Alloy Grey 2:1 4.2:1 13.8:1 29.2:1 1510 9.2 2 15/16 5 7/16 5 3/4 2 11/16 5/16-1/2 49530056 30ST Chrome Bronze 2:1 4.2:1 13.8:1 29.2:1 1510 12.3 2 15/16 5 7/16 5 3/4 2 11/16 5/16-1/2 49540055 40ST Alloy Black 1.9:1 5.8:1 13.2:1 40.2:1 1753 10.7 2 15/16 5 13/16 6 1/4 3 1/8 5/16-1/2 49540057 40ST Alloy Grey 1.9:1 5.8:1 13.2:1 40.2:1 1753 10.7 2 15/16 5 13/16 6 1/4 3 1/8 5/16-1/2 49540056 40ST Chrome Bronze 1.9:1 5.8:1 13.2:1 40.2:1 1753 14.3 2 15/16 5 13/16 6 1/4 3 1/8 5/16-1/2 49545055 45ST Alloy Black 2.4:1 7.6:1 13.9:1 44.8:1 2646 15.8 3 7/16 6 5/8 7 3 5/16 5/16 - 9/16 49545057 45ST Alloy Grey 2.4:1 7.6:1 13.9:1 44.8:1 2646 15.8 3 7/16 6 5/8 7 3 5/16 5/16 - 9/16 49545056 45ST Chrome Bronze 2.4:1 7.6:1 13.9:1 44.8:1 2646 21.3 3 7/16 6 5/8 7 3 5/16 5/16 - 9/16

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4"). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1" Flange Smoke Grey 10.5 3/8 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 19 1/8 19 1/8 1 9/16 2 15/16 3/16 11 3/4 16 9/16 9/16 1 11/16

Read more less

Lewmar 22lb Epsilon Stainless Steel AnchorModel: 0057510 Super-High Holding Power Galvanised and stainless steel versions Anti-snagging design Optional roll bar for sailboat application Ballasted tip for fast setting Fully compatible with Lewmar bow rollers The Epsilon super-high holding power anchor builds upon the legendary Delta® anchor’s robustness and quality. Its concave fluke and ballast keel ensure market-leading holding power and rapid setting, while maintaining self-launching characteristics with Lewmar bow rollers and retaining the same shank geometry as the original Delta®.Time-proven materials are used throughout the range: manganese steel or 316 stainless steel for maximum strength.

Read more less

Lewmar 10kg/22lb DTX Stainless Steel AnchorModel: 0057210 Manufactured from 316 stainless steel Self launching Ordinary Holding Power certified Guaranteed for 3 years against breakage Every DTX anchor is certified to Lloyd's Ordinary Holding Power standard. The new DTX anchor fills the gap between the existing galvanised and stainless Delta® anchors, allowing boat owners and builders to specify a stainless steel anchor for a significantly reduced outlay.Made from 316 stainless steel, the DTX anchors feature exceptional anti-corrosional performance and the enhanced aesthetics that stainless anchors offer. Utilising lead ballast encapsulated within the tip of the anchor to achieve the perfect centre of gravity, the DTX offers the initial bite and holding reliability that users of our Delta® anchors have come to expect.

Read more less

Lewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4"). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1" Flange Smoke Grey 9.09 3/8 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 15 3/8 20 1/2 1 9/16 2 15/16 3/16 13 3/16 12 7/8 18 1 11/16

Read more less

Lewmar Size 30 Ocean Hatch with Flat BaseModel: 39630050 Friction levers hold the lid open in any position up to 95° Anodised aluminium frame for corrosion resistance Suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom). With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face.Specifications Overall Dimensions L x W x H 15 3/8" x 20 1/2" x 1 9/16" Cut-Out Dimensions L x W x H 12 11/16" x 17 13/16" x 1 9/16" Hidge Width 13 3/16" Acrylic Window Thickness 3/8"

Read more less

Lewmar's CRW400 windlass represents a step-change in engineering and design for small boat windlasses. Built around a stainless steel chassis with composite bearing technology and a robust UV-stabilised ABS shell, the CRW400 is highly corrosion resistant and therefore suitable for use in salt-water. The unique "level wind" feature ensures that the rode is always stowed neatly on the drum, ensuring tangle-free anchoring and maximum stowage capacity. An integrated switch is fitted to the rear of the housing, together with a circuit breaker reset button. A clear window means that correct functioning of the windlass can be observed, with no risk of trapping fingers or clothing in the winding drum. Full UV-stablised ABS housing Manufactured in robust acetal, a compact worm and wheel mechanism powers the rode slider arm in perfect synchronisation with the motor, thereby neatly laying the rode on the drum The slider arm incorporates a sprung load-detecting device. This prevents the unit from paying-out when the line is slack. Heavy duty gears transfer the power of the 400W motor via the main shaft to the slider arm mechanism. Motor Power (W) Max Pull (lbs) Max Line Speed (ft/min) Normal Current Draw (A) Max Anchor Weight (lbs) Rode 400 605 82 15 40 115ft of 1/4" Dimensions A (in) B (in) C (in) 14 3/8 11 15/16 7 2/5

Read more less

Lewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.

Read more less

Lewmar 10LB LFX Anchoring Kit with 15' 5/16" G4 Chain 200' 5/8" 8-Plait LineModel: 69600925 Made from lightweight and strong, high-grade aluminium alloy Tough, durable and corrosion-resistant anodised finish Performs at its best in mud and sand environments Super high holding power Adjustable fluke angle for different conditions Easily detachable for locker storage (minimal tools required) Weight 10lbs Expertly engineered for maximum holding power, the Lewmar LFX boat anchor features a T-section fluke design perfect for sandy or muddy seabeds. This Lewmar anchor is constructed using durable yet lightweight high-grade anodized aluminum for an enhanced aesthetic. Plus, included is 15' of 5/16" G4 chain with 200' of 5/8" eight plait rode with shackle, so you have everything you need to deploy!What's in the Box: 10lb LFX Anchor 15' of 5/16" G4 chain with 200' of 5/8" eight plait rode Shackle

Read more less

Its unique shank profile and ballasted tip make the Delta anchor self-launching. The low centre of gravity and self-righting geometry ensure that the Delta anchor will set immediately. Consistent and reliable in performance, the Delta anchor has Lloyd's Register Type Approval as a High Holding Power anchor and is specified as the primary anchor used by numerous National Lifeboat organizations. Also available in premium grade Duplex/High Tensile stainless steel. All Delta anchors are "guaranteed for life against breakage". Lloyd's Test Certification is available for individual Delta anchors by arrangement. **Damage by deformation or bending is not covered by this guarantee.

Read more less

Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 14.1 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 22 11/16 22 11/16 1 2 7/8 19 15/16 19 15/16 1 11/16 Mounting Instructions Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use M6 (1/4"). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA.

Read more less

Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 10.8 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 18 3/16 22 11/16 1 2 7/8 15 7/16 19 15/16 1 11/16 Mounting Instructions Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use M6 (1/4"). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA.

Read more less

Lewmar 14lb Epsilon Stainless Steel AnchorModel: 0057506 Super-High Holding Power Galvanised and stainless steel versions Anti-snagging design Optional roll bar for sailboat application Ballasted tip for fast setting Fully compatible with Lewmar bow rollers The Epsilon super-high holding power anchor builds upon the legendary Delta® anchor’s robustness and quality. Its concave fluke and ballast keel ensure market-leading holding power and rapid setting, while maintaining self-launching characteristics with Lewmar bow rollers and retaining the same shank geometry as the original Delta®.Time-proven materials are used throughout the range: manganese steel or 316 stainless steel for maximum strength.

Read more less

Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 10.6 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 17 5/8 22 11/16 1 2 7/8 14 13/16 19 15/16 1 11/16 Mounting Instructions Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use M6 (1/4"). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA.

Read more less

Lewmar Dual JoystickModel: 589267 Ergonomic control ‘pad’ gives tactile feedback Membrane switch panel sealed from dust and moisture ingress Single and dual controllers available Dual controllers give total control of vessel via multi-axis function pad 12-24V dual voltage supply Multi-function LED indicator displays system deployment, thruster operation, low voltage, motor temperature warnings & fault conditions. Upgrade kit allows installation of single or dual controllers into a thruster system with previous generation controllers Fit existing cut-out of Lewmar joysticks Removable cover Lewmar’s new range of thruster controls provides a superior tactile control of single or dual thruster installations.The controllers are designed for all Lewmar TT, RT, SRT & VRT thrusters fitted with a blue box and can be fitted to thrusters fitted with a black-box using a controller adapter.The controllers are installed without the need for rear access and feature a snap-on bezel to neatly hide the mounting screws. A cover is also included, providing additional security against accidental use and giving extra environmental protection. If replacing a previous generation touch panel, joystick panel or dual joystick panel, the existing mounting hole and fixing screw positions can be reused.SpecificationsRange of controllers for Lewmar TT thruster range

Read more less

Lewmar Vector™ Manual Shallow Water Anchor - WhiteModel: 2024008752 Keeps your boat anchored securely in up to 8 ft. of water Quick, simple deployment with manual tensioning strap Effortless manual operation means no hoses, pumps, or wires Gas spring secured penetrating fiberglass spike for reliable positioning Corrosion-resistant powder-coated aluminum finish Versatile mounting options fit nearly any style of boat Lightweight design compatible with powerboats up to 22 ft. or 3,000 lbs. The Vector manual shallow water anchor by Lewmar provides precision positioning in up to 8 ft. of water. A gas spring secures the penetrating fiberglass spike, ensuring reliable and steadfast stability even through wake turbulence. Built with a corrosion-resistant powder-coated aluminum finish, this anchor withstands the elements season after season.What's in the Box: Vector Shallow Water Anchor white Mounting Hardware

Read more less

Lewmar Vector™ Manual Shallow Water Anchor - BlackModel: 2024008743 Keeps your boat anchored securely in up to 8 ft. of water Quick, simple deployment with manual tensioning strap Effortless manual operation means no hoses, pumps, or wires Gas spring secured penetrating fiberglass spike for reliable positioning Corrosion-resistant powder-coated aluminum finish Versatile mounting options fit nearly any style of boat Lightweight design compatible with powerboats up to 22 ft. or 3,000 lbs. The Vector manual shallow water anchor by Lewmar provides precision positioning in up to 8 ft. of water. A gas spring secures the penetrating fiberglass spike, ensuring reliable and steadfast stability even through wake turbulence. Built with a corrosion-resistant powder-coated aluminum finish, this anchor withstands the elements season after season.What's in the Box: Vector Shallow Water Anchor Black Mounting Hardware

Read more less

Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 10.6 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 20 3/16 20 3/16 1 2 7/8 17 3/8 17 3/8 1 11/16 Mounting Instructions Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use M6 (1/4"). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA.

Read more less

Both the 3-Button Windlass Remote Kit and the 5-Button Windlass & Thruster Kit are easily retrofitted to existing installations and include a replaceable battery. The fobs float and are waterproof to IP67 (1 Meter deep). Using over one billion individual codes, our proprietry encryption scheme prevents false triggering from any other device or similar fob. And both kits include a Receiver that supports up to eight remote key fobs (additional fobs sold separately). Allows wireless remote operation (up/Down) of any solenoid switched windlass. FCC & CE certified Kit includes one wireless fob and one receiver Notes: Most Lewmar products utilize solenoids although some of our smaller products may not. If in doubt contact your Lewmar representative.

Read more less

Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 10.1 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 19 5/16 19 5/16 1 2 7/8 16 9/16 16 9/16 1 11/16 Mounting Instructions Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use M6 (1/4"). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA.

Read more less

Lewmar's 3-strand rope is an economical choice for your windlass rode. Keep in mind, the windlass does not stow the rode in the anchor locker - gravity does. So make sure you have ample depth and volume in your anchor locker to accommodate the length of rode you have chosen. 3-Strand is typically 20-30% less expensive than premium plaited anchor line. 3-Strand line, when used in salt water, will stiffen over time. It can be soaked in a bucket of fresh water and fabric softener overnight (the longer the better) to bring back a more flexible condition. If this does not yield acceptable results, it should be replaced.

Read more less

Lewmar 66840045 Emergency Manual Recovery F/H2/3Model: 66840045Available on the H2/H3 as an optional extra, it remains fitted to the unit for user convenience.

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4"). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1" Flange Smoke Grey 6.04 3/8 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 10 1.2 16 3.16 1 9/16 2 11/16 3/16 8 7/8 7 15/16 13 11/16 1 7/16

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4"). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Flat base hatches cannot be used with Trim kits or Roller shades Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Flat Base Smoke Grey 5.77 3/8 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 12 3/4 12 3/4 1 9/16 2 15/16 3/16 5 7/16 10 1/16 10 1/16 1 9/16

Read more less

Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 8.6 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 15 5/8 20 3/4 1 2 7/8 12 7/8 18 1 11/16 Mounting Instructions Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use M6 (1/4"). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA.

Read more less

Its unique shank profile and ballasted tip make the Delta anchor self-launching. The low centre of gravity and self-righting geometry ensure that the Delta anchor will set immediately. Consistent and reliable in performance, the Delta anchor has Lloyd's Register Type Approval as a High Holding Power anchor and is specified as the primary anchor used by numerous National Lifeboat organizations. Also available in premium grade Duplex/High Tensile stainless steel. All Delta anchors are "guaranteed for life against breakage". Lloyd's Test Certification is available for individual Delta anchors by arrangement. **Damage by deformation or bending is not covered by this guarantee.

Read more less

185mm x 6mm x 1500mm fiberglass tube for 185tt thrusters.

Read more less

Lewmar's 3-strand rope is an economical choice for your windlass rode. Keep in mind, the windlass does not stow the rode in the anchor locker - gravity does. So make sure you have ample depth and volume in your anchor locker to accommodate the length of rode you have chosen. 3-Strand is typically 20-30% less expensive than premium plaited anchor line. 3-Strand line, when used in salt water, will stiffen over time. It can be soaked in a bucket of fresh water and fabric softener overnight (the longer the better) to bring back a more flexible condition. If this does not yield acceptable results, it should be replaced.

Read more less

Lewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.

Read more less

V4/V5 Windlass Gypsy #203 Replacement gypsy on Windlass Model V4/V5Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 5/8" (16 mm) (3 strand hard lay up) Chain Size - 3/8" (10 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

Read more less