Universal Remote Control Kit for RCL-50 and RCL-100 Searchlight Control an ACR spotlight from any place on a vessel with fingertip control and accuracy  This controller can be surface or flush mounted.Compatible With:RCL-50 and RCL-100*Not compatible with RCL 100-LED In the Box: URC-102 Master controller URP-102 Point Pad™ Connectors Coaxial cable - 15' Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 5"H x 8"W x 9"L WT: 1.5 lbs UPC: 791659928332

Read more less

RGB LED Controller WaterproofFeatures: 10 SPEEDS – 20 MODES Waterproof RGB LED Controller via smartphone APP Use RGB MPS APP to control your infinite colors – 10 speeds – 20 dynamic modes LEDs flash to your music via your smartphone Bluetooth feature Operational voltage: 12-24V DC Maximum Current: 10a APP operating range 60 feet (20m) unobstructed Outputs: (4) Micro DIN Female connectors Fused power and ground wires for easy connection Use with MPS-RGBWWS4 (sold separately) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Utility Light - Cool White - 10-30VThis is a surface-mount, low-profile E-330 LED compact engine room light. The white plastic end cap features a notch on the wire side to allow side access for the connection wires. A low-profile fixture extends a mere 5/8" from the mounting surface.Features: 12/24 Volt (10-30 VDC) - 10 Watt 33 x 0.5-watt 2835 LEDs Cool white (5700-6300K) Polycarbonate lens with plastic housing IP67 Meets requirements and standards for SAE J1171 USCG, ABYC & NMMA Specifications: Lumens: 727 Beam Angle: 120° Surface Mount (wire can exit from the bottom or end of the fixture) *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 6"W x 11"L WT: 0.4 lbs UPC: 786142415901

Read more less

20" Scan-Strip 4 Color LED Light - RGBWThis 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.Features: Switching off for more than 4 seconds resets the color to white RGBW LEDs Colors are daylight white (4000-4500K), blue, red, green Lifespan 30,000+ Hours 12/24 Volt IP65 can be installed in engine rooms and exterior locations Ideal for under-gunwale lighting SS Mounting Screws Included Specifications: Beam Angle: 120°  Watts: 3.1 Lumens: 234 Dimensions (L X W x H) (inch): 20" x 7/8" x 1/2" *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 5"W x 21"L WT: 0.25 lbs UPC: 786142416526

Read more less

Replacement Bracket for WL-1 Floating Strobe LED WaterlightFeatures: Replacement Bracket Specifically for WL-1 Floating Strobe LED Waterlight

Read more less

2-Piece Connect Cable Black Oak's Connect Cable for 2 pieces allows users to connect 2 lights under 10'' in length to one wiring harness, allowing all the lights to power on with one switch. This is a great wiring solution when upgrading fog lights to Black Oak's Pod Series lights. Just make sure to upgrade the fuse in the applicable wiring harness to the appropriate size.Users will want the fuse size to be just above the amp draw of the lights. For instance, if running two of Black Oak's 40w pods with a 2.8 amp draw each, bringing a total draw of 5.6 amps, users will need a 10 amp fuse.Specifications:End to End Measurement: 31"*Sold as an Individual  Specifications: Type: Parts Box Dimensions: 1"H x 5"W x 7"L WT: 0.1 lbs UPC: 850044517428

Read more less

NaviLED PRO Deck Mount AdapterRobust housing for Halogen 8504 Series Masthead/Floodlight Lamps

Read more less

X-Series DMX Junction BoxFor use in-conjunction with OceanLED Colours APP and DMX controller. Allows for up to 4 DMX connections to OceanLED Xtreme Series DMX Colours Lights per Junction Box. Can be linked to further DMX junction boxes to connect a series of LED Lights.Features: 12/24v DC IP66 4x Fused Power/DMX outputs (4A max power output) Built-in DMX terminator DMX input/output to allow multiple expansion To be used in conjunction with OceanLED Xtreme Series DMX Colours Robust Polycarbonate Design See-through lid to view connections Semi-transparent LID Specifications:Warranty: 2 years Quick Guide (pdf)

Read more less

3M Data Cable for Full Spectrum HubThis data cable is compatible with Metro Marine's full spectrum hub.

Read more less

6M Data Cable for Full Spectrum HubThis data cable is compatible with Metro Marine's full spectrum hub.

Read more less

4M Data Cable for Full Spectrum HubThis data cable is compatible with Metro Marine's full spectrum hub.

Read more less

3M Jumper Cable for Full Spectrum FixturesThis jumper cable is compatible with all Metro Marine full spectrum RGBW fixtures. 

Read more less

0.6M Data Cable for Full Spectrum HubThis data cable is compatible with Metro Marine's full spectrum hub.

Read more less

3M Switch Control Cable for Single Color HubThis switch control cable is compatible with Metro Marine's single color hub. 

Read more less

3M Jumper Cable for Monochromatic FixturesThis jumper cable is compatible with all Metro Marine monochromatic fixtures. 

Read more less

Attwood LightArmor Plug-In Base - 2 Pin - Black - RectangleINTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for.A Sure FitThe new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or traileringKey Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pico OHM Expansion ModuleThe Pico OHM modules make it easy to connect 4-wire RGB accessories to a standard 2-wire DC electrical system and control the color output through a Poco Digital Controller.Features: Connect RGB accessories to a standard 2-Wire DC electrical system 4 Modules in the pack RGB only (no RGBW) 12VDC ONLY (0.4A max current draw) No TTP (Timed Toggle Protocol) Lumitec Digital Controller (POCO) is required to control Pico OHM

Read more less

URC-102 Master Controller for RCL-50 and RCL-100 Searchlight Replacement controller which controls On/Off, rotation speed and the XRCiZ feature of the RCL-50 and RCL-100 searchlights.Compatible With:RCL-50 and RCL-100 searchights *Not compatible with RCL 100-LEDIn the Box: URC-102 Controller Connectors *Sold as an Individual WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 4"H x 7"W x 8"L WT: 1 lbs UPC: 791659192733

Read more less

OceanBridge Switch Input CableThis cable is meant for connecting external switches to OceanLED's OceanBridge.How to UseTo connect external switches, wire the push-button switches to the OceanBridge Switch Input Cable. Then, connect the switch input cable plug to the OceanBridge switch input connector. Keep in mind that supplementary wiring will be needed to establish the connection for the 12/24V DC power to the switch installation. Specifications: Type: Cables Box Dimensions: 1"H x 4"W x 4"L WT: 0.1 lbs

Read more less

S1W Ultra Thin Solar Light - GreenProven Hurricane Tough!Specifications: Body Material: High Impact Polycarbonate Power Supply: U.S.A made High Efficient Solar Panel Battery: Lithium Ion 3.7v/340mah LEDs: 6 F3 LEDs Color: Green Visual Distance: 500M Working Temperature: -20c (-4F) Life Expectancy: 5 Years Waterproof: IP68 Totally Submersible Size: 4.5" x 3.5" x .4" Warranty: 2 years Quick Guide (pdf)

Read more less

4" LED Light Strip - Blue with Gasket - 12VThis is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.Features: 12VDC, 1.2W 6 EA Blue 2835 LEDs IP67 *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbs UPC: 786142416410

Read more less

Scan-Strip Light - 8" - WhiteScan-Strip LED lighting is a quality product for marine or RV use.Features: 8 in. white light in retail packaging Mount this scan strip light under gunwales, in storage lockers, coolers, fish boxes, and engine rooms Use the below deck in cabin areas for general lighting or courtesy lights  *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 4"W x 9"L WT: 0.15 lbs UPC: 786142413464

Read more less

LightArmor Plug-In Base - 2 Pin - Black - TeardropINTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for.A Sure FitThe new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or traileringKey Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

LightArmor All-Round Plug-In Light - 36"Premium LED lights with a flexible, impact-resistant composite pole make these perfect for anglers and hunters to maneuver through low-hanging obstacles.  The subtle, glare-free black matte finish complements many of today's boat designs.The threaded locking collar fits securely with LightArmor Plug-In Light Bases. OEM Part Number 5530-36BP1Features: Impact-resistant polycarbonate lens Water-resistant Corrosion/UV resistant The light head adjusts 15° fore to 15° aft Over 50,000-hour life Technical Specifications: Visibility Distance - 2NM Visibility Field of View - 360° Vessel Size - Up to 39.4' (12 M) Connection - Standard 2-Pin Pole Length - 36" Operating Range - 10.5 to 14.4V DC Certifications:U.S.C.G.*Sold as an Individual Specifications: Type: Lights Box Dimensions: 3"H x 5"W x 42"L WT: 0.7 lbs UPC: 022697021564

Read more less

Pico C-4 Expansion ModulePico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories and devices that do not have the sophisticated PLI technology built-in. The Pico C-4 module provides Poco or TTP control of third party RGB or RGBW lighting accessories. The Pico P-1 module acts as an in-line solid-state relay, controlling any large load up to 20 Amps with on/off and PWM dimming control.  Owner's Manual (pdf)

Read more less

OceanDMX RC Explore XFM Dual 915MHzThe OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc.Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colours only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual Quick Guide (pdf)

Read more less

6-Channel Digital Switch Module Shadow-NET™ Control for Single Color & 3rd Party LightingThe 6-channel digital switch module offers a convenient way to integrate any standard light with the Shadow-Caster™ MFD interface. Simply plug in the module to the Shadow-NET™ system and switch support will automatically populate on the screen.Each module provides 6 channels of support, that will handle up to 10 amps per channel with digital fault protection. There is also a manual switch input for overriding the interface.Features: 6 independent digital switches Control other brands of lights with the Shadow-Caster™ MFD interface and phone app Digital over current fault protection Manual switch override Green/red LEDs provide the status of each channel Full integration with Shadow-NET™ interface The blue backlight indicates the power state Specifications: 12/24V operation 10A each channel 5/16” power lugs IP67 Deutsch connections Power lug protection boots What's Included? 6 channel digital power switch Mounting hardware 4 #8 PH x.5” Pre-wired mating connectors 3 year standard warranty Quick Guide (pdf)

Read more less

2013-2018 RAM 1500 Bumper Mount for 40" Lightbar - Black2013-2018 Dodge RAM 1500 Bumper Mount - Urethane bumper only. Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar. Features: Aggressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar ∗ Lights sold separately Brochure (pdf)

Read more less

2013-2018 RAM 1500 Bumper Mount for 30" Lightbar - Black2013-2018 Dodge RAM 1500 Bumper Mount - Urethane bumper only. Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar. Features: Aggressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar ∗ Lights sold separately Brochure (pdf)

Read more less

2018 Jeep Wrangler JL Cowl Mount Short Standoff KitCompliment your RIGID Jeep Wrangler JL Cowl mount with the short standoff mounting option for adding a 2nd pair of lights.These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL.  Lights sold separately. In the Box:All Necessary Hardware∗ Sold as a Pair

Read more less

4-Piece Connect CableBlack Oak's 4-piece Connect Cable allows users to connect 4 lights under 30'' in length to one wiring harness, allowing all the lights to power on with one switch. This is a great wiring solution when upgrading fog lights to Black Oak's Pod Series lights. Just make sure to upgrade the fuse in the applicable wiring harness to the appropriate size.Users will want the fuse size to be just above the amp draw of the lights. For instance, if users are running 4 of Black Oak's 40w pods with a 2.8 amp draw each, bringing a total draw of 11.2 amps, you'll need a 15 amp fuse.*Sold as an Individual  Specifications: Type: Parts Box Dimensions: 1"H x 5"W x 7"L WT: 0.15 lbs UPC: 850044517435

Read more less

Wedge Plate for GS-850 & GS-950In case your T-top has a slight curve, keep the appearance of your Grand Slam 850 Electric VHF Antenna Mount and Grand Slam 950 Electric Anchor & Stern Light clean by mounting them perfectly straight with our plastic wedge plates.Features: Corrects angle of GS-850 and GS-950 to perpendicular to the T-top  Fits Grand Slam 850 Electric VHF Antenna Mount and Grand Slam 950 Electric Anchor & Stern Light No drilling 1-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Closed Cell Foam Gasket for Ember Series LightsFoam gasket used during the installation of Ember Series Lights.Sold as a single Specifications: Type: Parts Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs

Read more less

LED Aluminum Dock LightThe Marine Grade Solar Deck Lite is an industrial strength solar powered dock light made from anodized aluminum for superior weather resistance in marine environments. IP68 waterproof design. Super bright LEDs, powerful solar panel and changeable AAA (NiMH) batteries provide all night illumination. Low-profile design makes these lights perfect for docks and marina applications needing to provide ambient pathway and dock lighting. Added built-in reflector provides extra safety for passing boaters and makes them ideal for marking swim rafts. Easy hassle-free mounting, no wires, no mess, no electrical cost.Dimensions: 4-1/8" x 4-1/8" Approx. 7/8" Tall

Read more less

2018+ Ford F-150 Hidden Grille Mount f/6" Lightbar - Black2018+ Ford F-150 Grille Mount, fits any two (2) 6" SR-Series, 6" SAE, or 6" Midnight SR-Series RIGID LED light bar. Features: Agrressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware Fits any (2) 6" SR-Series, 6" SAE, or 6" Midnight SR-Series RIGID LED light bar ∗Lights sold separately Brochure (pdf)

Read more less

2007-2017 Jeep JK 20" Light Hood MountAll of RIGID’s grilles, OE Brackets, and Mounts are made with 100% stainless steel and covered with UV and abrasion resistant powder-coat to ensure years of use in the harshest conditions. Features: Aggressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware ∗ Lights sold separately

Read more less

2007-2017 Jeep JK Dual D-Series A-Pillar MountAll of RIGID’s grilles, OE Brackets, and Mounts are made with 100% stainless steel and covered with UV and abrasion resistant powder-coat to ensure years of use in the harshest conditions.Features: Aggressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware ∗ Lights sold separately

Read more less

2018 Jeep Wrangler JL Cowl Mount Tall Standoff KitCompliment your RIGID Jeep Wrangler JL Cowl mount with the tall standoff mounting option for adding a 2nd pair of lights.  Used in combination with Wrangler JL Cowl Mount P/N 41656.These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL. Lights sold separately. In the Box:All Necessary Hardware∗ Sold as a Pair

Read more less

Sound Activated RGB Controller with IR RemoteFeatures: Sound activated controller with IR remote You can connect up to three HE-5MRGB-1 lights to the controller Sensitivity adjustment WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2018 Jeep Wrangler JL Fog Mount f/2 D-Series LightsRIGID Fog Mounts for the 2018 Jeep Wrangler JL stand alone when it comes to auxiliary lighting on and off the road. These mounts give that sleek OEM look but add the incredible look and functionality of the RIGID brand. This mount fits the RIGID D-Series and mounts in the existing OEM location. These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL. Lights sold separately.In the Box:All Necessary Hardware∗ Sold as a Pair

Read more less

Light Bar Security Kit for Flush Mount LightsStainless steel security hardware kit for any of the RIGID Flush-mount LED Lights. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.Features:  Stainless Steel Construction Hardware Includes: Security Bolts and Security Keys One (1) kit required for a pair of lights.Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.

Read more less

2017-2018 Raptor Triple Fog Mount KitThe 2017-2018 Ford Raptor Fog Light Mount Kit allows you to mount our D-Series (Dually or D2) LED lights (not included) in your Ford's OEM fog lamp locations. This kit gives your otherwise square D-Series lights a clean from-the-factory look without having to drill or cut into your bumper. Made from high quality stainless steel, these adaptor plates are powder-coated black for a long-lasting finish. This kit comes with everything you need to install 6 D-Series lights (not included) in both fog light locations and is backed by RIGID Industries' limited lifetime warranty. Fits 6 D-Series.

Read more less

Pigtail Adapter f/RGB Accent Lighting PodsThis Pigtail Adapter is designed to wire Heise RGB accent light pods (HE-TL1RGB/HE-ML1RGB) into any four wire positive anode RGB controller (HE-RGBSAC-1) without cutting the waterproof connection.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Vertical Bar MountThe RIGID Industries Vertical Tube Clamp Mount allows you to mount any one of our D-Series, SR-M, or SR-Q LED lights to any vertical tube. This mount is made in the USA from light-weight, black anodized billet aluminum.Features:  Billet Aluminum Construction Universal Bar Mount

Read more less