Caprera3 Spreader Light - White Non-Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Square Mirage Down Light - Spectrum RGBW Dimming - Polished BezelFeatures: Blends harmoniously with today's contemporary designs Boasts incredible output & is among the slimmest in the industry Exceeds the output of 20W halogens by up to 300% Water sealed for interior or exterior use Spring Mounting Clips for easy installation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: LED: Yes Voltage - Input Range (Volts): 10-30v Dimming: Yes Box Dimensions: 2"H x 4"W x 4"L WT: 0.4 lbs UPC: 089300161178

Read more less

Illusion Flush Mount LED Down Light - Spectrum RGBW - Warm White - Mirrored HousingThe Illusion Series is designed to have an ultra-thin profile with a seamless, clean look and incorporating industry-first materials and processes.  Unique in styling and highly versatile in appearance the Illusion Down Light will launch the series. A bezel-free design allows for a wafer-thin profile with a shallower mounting depth than the current Mirage light, but it still incorporates the convenient butterfly clip mounting system with no exposed fasteners. The Illusion Down Light will be compatible with our new Intelligent  “Sound-to-Light” feature when paired with a Poco 4 module. Color output options will be warm white/spectrum, cool white/spectrum, and single color white and warm white output. A proprietary finishing process allows for unique industry-first designs incorporating metallic colors and many other styling options. This unparalleled flexibility adds a new level of customization to the downlight category to meet the contemporary design and color pallets of today’s boats.Ultra Thin ProfileThe Illusion Down Light is designed with a wafer-thin profile for a seamless, clean look. Chemically hardened glass reduces the thickness of the light's face, while a shallow housing further reduces the space required to mount it on hardtops and interior ceilings.Unique Finishing OptionsA proprietary finishing process was developed for the Illusion Down Light that allows unique finishes to be applied to the face of the light. The customizable options are endless, from the illusion of a bezel to contemporary metallic colors and wood grain and metal finishes.Butterfly Mount ClipThe Illusion Down Light will retain the convenient butterfly mount clip system found on the Mirage series of downlights for easy installation with no exposed fasteners. This tried and tested mounting system will speed up the installation process while reducing overall complexity.Poco CompatibilityThe Illusion Down Light is PLI-enabled, meaning the internal "Power Line Instruction" technology built into the light makes it compatible with our award-winning Poco Digital Lighting Control system. This will allow for lighting control when paired to a Poco module for precise color selection, dimming, and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.Features: Power line instruction 2-wire hookup Dimming IP Rated RGBW Full-Color 3-Year Warranty Specifications: 12v DC Amps: 430mA 24v DC Amps: 230mA Correlated Corrected Temperature (CCT): 5000 CE Certified: Yes Color Match Commitment (CM): Yes Color Output: Spectrum RGBW - Warm White Color Rendering Index (CRI): 80+ Depth: 0.7 in (1.77cm) Diameter: 2.5in (6.35cm) Finish/Housing: White/Mirrored Housing IP Rating: 67 Lumens: 285 Op. Temp F/C: -31/35 to + 131/55 F PLI Enabled: Yes Related Watts: 6W Sub Category: Dome & Down Lights Third-Party Dimmer Compatibility (3PD): No Timed Toggled Protocol (TTP): Yes UL Certified: No Voltage: 10-30 VDC

Read more less

20" Scan-Strip 4 Color LED Light - RGBWThis 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.Features: Switching off for more than 4 seconds resets the color to white RGBW LEDs Colors are daylight white (4000-4500K), blue, red, green Lifespan 30,000+ Hours 12/24 Volt IP65 can be installed in engine rooms and exterior locations Ideal for under-gunwale lighting SS Mounting Screws Included Specifications: Beam Angle: 120°  Watts: 3.1 Lumens: 234 Dimensions (L X W x H) (inch): 20" x 7/8" x 1/2" *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 5"W x 21"L WT: 0.25 lbs UPC: 786142416526

Read more less

8" LED Light Strip - White with Gasket - 12VThis is a multi-use 8" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.Features: 12VDC, 3W 15 EA 2835 LEDs Daylight white (4500K) IP67 Specifications:Lumens: 176*The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 9"L WT: 0.1 lbs UPC: 786142416441

Read more less

Stealth Series - Fixed Mount White All-Round Lights(1608) "Reduced Glare" Design Black Plastic Top with Clear Fluted Lens & Frosted Globe Fixed Mount Black Plastic Base 12v L.E.D. Pole: 3/4" Diameter Anodized Base Dimensions: 1" x 2-5/8" Vertical Height: 7-1/8" Specifications: Housing: Black Lens Color: White Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12v LED: Yes Box Dimensions: 3"H x 7"W x 12"L WT: 0.65 lbs UPC: 085226771095 Quick Guide (pdf)

Read more less

Tri/Anchor/Flash Fixture SwitchConvenient Switch for Tri Color Nav Fixture. Conveniently shows what the Tri Color Fixture mode is in. Easy to hook up with push connectors.Features: Visual LED indicators Solid Metal Plate Easy Connect push connectors Specifications: Input Voltage: 12 VDC Systems Warranty: 3-Year Specifications: Type: Lights Box Dimensions: 1"H x 7"W x 8"L WT: 0.2 lbs UPC: 850001461535 Brochure (pdf)

Read more less

Adjustable Linear LED Light with Built-In Dimmer - 20" Warm White with SwitchThese sleek Light Bars are compact and put out the light. >80 CRI LED.Features: Only 9.5mm Thick! Built-in Touch Switch and Easy Mounting High CRI Light for beautiful surroundings Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: White LED Color: Warm White Dimming: Yes Box Dimensions: 1"H x 6"W x 22"L WT: 0.75 lbs UPC: 894953001227 Brochure (pdf)

Read more less

Stern Light - 2NM - Silver Housing with FB BaseThis white stern light has a silver housing, is horizontally mounted, and has a two-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile. Features: Silver anodized aluminum housing 2.5m cable is included Specifications: Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR Mounting: Horizontal EAN: 5704438043602 Min. Feed Wire Gauge: 0.5mm2 AWG22 Light Color: White  Visibility: 2NM Included In the Package: 1 Navigation light, pre-cabled with 2.5 meters shielded marine grade cable and installation guide Materials: Silver anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane IP rating: IP68   Connection: 2.5m cable Current Consumption (mA @ 24VDC): 50 Current Consumption (mA @ 12VDC): 110 Dimensions Metric: Ø92.5mm x 36mm Dimensions Imperial: Ø3.6" x 1.4" Operating Temperature: -25 degrees C to 55 degrees C Operating Voltage: 10-32VDC Power Draw (W): 1.3 Vessel Size: Under 12 meters, 12-20 meters, and 20-50 meters Specifications: Housing: Silver Visible Range (Miles): 2NM Voltage - Input Range (Volts): 10 - 32 Box Dimensions: 4"H x 4"W x 4"L WT: 1.4 lbs UPC: 879343043735 Quick Guide (pdf)

Read more less

Combined Sidelight - 2NM - Silver Housing with FB BaseThis silver sidelight is horizontally mounted and has a two-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile.Features: Silver anodized aluminum housing 0.75m cable is included Specifications: Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR Mounting: Horizontal EAN: 5704438043282 Min. Feed Wire Gauge: 0.5mm2 AWG22 Light Color: Red and green Visibility: 2NM Included In the Package: 1 Navigation light, pre-cabled with 2.5 meters shielded marine grade cable and installation guide Materials: Silver anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane IP rating: IP68 Connection: 2.5m cable Current Consumption (mA @ 24VDC): 90 Current Consumption (mA @ 12VDC): 163 Dimensions Metric: Ø92.5mm x 36mm Dimensions Imperial: Ø3.6" x 1.4" Operating Temperature: -25 degrees C to 55 degrees C Operating Voltage: 10-32VDC Power Draw (W): 2.2 Vessel Size: Under 12 meters Specifications: Housing: Silver Lens Color: Red/Green Visible Range (Miles): 2NM Voltage - Input Range (Volts): 10 - 32 Box Dimensions: 4"H x 4"W x 4"L WT: 1.4 lbs UPC: 879343043414 Quick Guide (pdf)

Read more less

Radiance + Curved 30" Light Bar - RGBWThe stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ Curved RBGW light bars. The latest addition to the Radiance light family provides the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ Curved RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary RDS-Series but include a stylish color-changing backlight.Inside, the Radiance+ Curved RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ Curved RGBW light bars take the customization of your vehicle to the next level. Own the night in style with Radiance+ RBGW lighting.Features: 8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode) Backlighting is independently controlled using switch logic. Fits All RDS-Series Light Covers And Mounts Black exposed printed circuit board 10-year warranty 9-15 V DC Black powder coat finish Pressure equalizing vent IP68 compliant - dust and water ingress High-grade aluminum alloy housing and heat sink Over/under voltage protection high-impact polycarbonate lens Mounting brackets are included RFI/EMI protection Rohs compliant Off-road use only Product Comes with: 30-inch Radiance+ RGBW light bar Harness Mounting brackets Media pack Specifications: Size (inch): 30"  Weight (Lbs): 8.80     Optics: Spot drive Watts: 125 Amp Draw: 8.9 Raw Lumens: 11880 Specifications: Beam Pattern: Spot-Driving Combo Housing: Black Length (Inches): 30" Voltage - Input Range (Volts): 12v Box Dimensions: 6"H x 9"W x 34"L WT: 11.8 lbs UPC: 849774034206

Read more less

30" Marine Curved Double Row LED Light Bar - Spot Optics - White Housing - Pro Series 3.0Stumbling around in the dark, tripping over fishing tackle and poles? Besides the obvious safety factor, that can really turn a great fishing trip or family boating event into a total drag. This 30 in. marine light not only makes it easy for users to maneuver easily but also gives boaters complete control of vision no matter what the seas hurl at them. In a dingy or even in a full-size yacht, Black Oak has boaters covered with the 30-inch marine series double-row LED light bar.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Built Like a Tank:  In order to take all of the punishment that any outing can throw, Black Oak's 30 inch light bar is made using the most durable materials and proven manufacturing processes available today. Through this painstaking construction, this boat LED light bar achieved a security rating of IP69K as well as passing US military standards. Black Oak's 30 inch light bar is completely waterproof, corrosion resistant, and has an average lifespan of 50,000 hours of continuous use.All said, this light bar is almost guaranteed to outlast the vehicle it is mounted on and is backed by Black Oak's limited lifetime warranty and 30 day money-back guarantee.Features: Spot lighting patterm 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Premium Dupont powder-coating for the highest quality and most resistant finish Combination Flood/Spot light pattern offers a superior lighting pattern Multi-mount brackets made of 9 gauge marine grade Stainless Steel Upgraded bolts with stronger threads for extra protection Lens cover made of Lexan with a UV protectant Activities & Uses:  Off-road combo light T-Top boat light Behind the grill light bar UTV roof lighting Perfect between tow hooks on white Ram 2500 and 3500's Technical Specifications: Total Wattage: 300W Amp. Draw: 12.7 LED Quantity: 60 Weight: 10.8 lbs. Raw Lumens: 39,600 Warranty: Lifetime IP Rating: IP69K     Connection: Deutsch connector Dimensions with Mounting Bracket (Width x Height): 31.4" x 4.125" In the Box: 30” curved double row light bar Complete wiring harness with fuse, relay, and switch 12 gauge wire Mounting brackets All hardware is ready to install! *Sold as an Individual Specifications: Beam Pattern: Spot Housing: White Length (Inches): 30" Voltage - Input Range (Volts): 12v Box Dimensions: 6"H x 7"W x 36"L WT: 11.15 lbs UPC: 850044517565

Read more less

Pro Series 3.0 Double Row 6" LED Light Bar - Combo Optics - White Housing This waterproof light bar is the definition of versatility. The 6" light bar in a combination (float/spot) pattern gives users the directional spread desired, with the option of moving the light up and down with Black Oak's mounting system. With its durable and completely submersible waterproof housing, this 6" light bar will be a number one lighting choice once installed.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Premium Dupont powder-coating for the highest quality and most resistant finish Combination Flood/Spot light pattern offers a superior lighting pattern Multi-mount brackets made of 9 gauge marine grade Stainless Steel Lens cover made of Lexan with a UV protectant  Activities & Uses:  Perfect Jon boat bow light Marine flood light ATV or UTV brush guard lights Great as a deck light Loading & unloading equipment Technical Specifications: Total Wattage: 60W Amp. Draw: 3.5 LED Quantity: 40 Weight: 7.6 lbs. Raw Lumens: 7,920 Warranty: Lifetime IP Rating: IP69K     Connection: Deutsch connector Dimensions with Mounting Bracket (Width x Height): 6" x 4.125"  In the Box: Light bar Complete wiring harness with fuse, relay, and switch 12 gauge wire Mounting brackets All hardware is ready to install! *Sold as an Individual Specifications: Beam Pattern: Spot-Flood Combo Housing: White Length (Inches): 6" Voltage - Input Range (Volts): 12v Box Dimensions: 4"H x 9"W x 15"L WT: 4.4 lbs UPC: 850044517558

Read more less

Mirage - Flush Mount Down Light - Glass Finish/Polished Stainless Steel Bezel - 4-Color Red/Blue/Purple Non Dimming with White DimmingLumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens).Specifications: Voltage: 10 - 30V DC 12V DC Amps: 490mA 24V DC Amps: 250mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 6 Lumens (White): 372 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 3.25" (8.25cm) Height: 3.25" (8.25cm) Depth: 1.11" (2.81cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: LED: Yes Voltage - Input Range (Volts): 10-30v Dimming: Yes Housing: Stainless LED Color: White/Blue/Red/Purple Box Dimensions: 2"H x 3"W x 3"L WT: 0.2 lbs UPC: 089300103727 Brochure (pdf)

Read more less

L.E.D. Utility Light with Snap on Front CoverConstructionWhite Molded Plastic Snap-On Front Cover Conceals Mounting Screws Diffusion Lens Flush Mounting Easy Installation12 Volt L.E.D.Uses less than half the energy draw or standard lights supplied with 7" pig tail wire leads Specifications: Dimming: No Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: White LED Color: White Box Dimensions: 2"H x 3"W x 6"L WT: 0.1 lbs UPC: 085226350832

Read more less

Caprera3 Spreader Light - White/Blue Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Red Replacement LED for Rub Rail Lights F38-6602-1, F38-6602-2, F38-6800D & F38-6810BSpecifically for Rub Rail Lights F38-6602-1, F38-6602-2, F38-6800D and F38-6810B.Replacement Navigation Lights for Rub Rail-Mounted: F38-6602-1 F38-6602-2 F38-6800D F38-6810B *Sold IndividuallyThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Contour Anchor Light - 39" - White Shaft, White BaseLED Navigation Anchor Light - The design says it all. Unobtrusive, durable, reliable, with striking good looks. The slimmest profile in the industry and a locking retractable base. Select from 12” or 1m heights. U.S. Coast Guard approved 2nm.Features: USCG approved to 2 nautical mile (2NM) Slim profile with small footprint Available in 12"(1ft)  and 39"(1M) lengths Retractable design with lockable base Easy installation with 2-wire hookup Voltage: 10-30V DC

Read more less

Sea Hawk-XLR LED Floodlight - White LED/White HousingNext level technology offering incredible intensityOur brightest Sea Hawk to date!1300 lumens of crisp, white, darkness-busting illumination with all the proven Sea Hawk durability and efficiency advantages.Engineered light patternsAdvanced optical systems deliver incredible illumination without glare. Spread lamps illuminate a wide, close-range spread over a cockpit, foredeck or working area. Spot lamps provide a narrower, more concentrated illumination for tuna towers, masts or for forward facing lighting on a variety of applications.Unique Corrosion Proof HousingSea Hawk XLR housings are precision injection molded from thermally conductive ceramic polymer. This advanced material draws heat from internal electronics for reliable long-term operation and eliminates the need for an aluminium housing in this class of floodlight, removing corrosion risks in the harsh marine environment.Integrated DimmingBuilt-in convenience of switching between High level full intensity and low level dimmed output.Multivolt 9-33V DCAdvanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.Specifications: Housing Description: ‘Non metal’ thermally conductive polymer housing Lens Material: Grilamid Bracket: Polished 316 stainless steel Color Temperature: 5000K (White) Cable: Pre-wired with 0.5M of triple core marine cable Operating Voltage: Multivolt™ 9-33V DC Degree of Protection: IP 67 - Completely Sealed High Power Consumption: 18W (<1.5A@12V / <0.75A@24V) Low Power Consumption: 2W (<0.17A@12V / <0.08A@24V) Weight: 450g (including cable) Light Output: 1300 lumens (White) Approvals: CE, RCM Manufactured In: New Zealand Specifications: Voltage - Input Range (Volts): 9-33v LED: Yes Box Dimensions: 3"H x 7"W x 9"L WT: 1.3 lbs UPC: 9416325233398 Brochure (pdf)

Read more less

EuroLED 75 3" Round Spring Mount Down Light - Warm White LED - Stainless Steel Rim - 24VStylish, reliable and energy efficient, these lamps will provide excellent illumination to enhance interior and exterior spaces.The EuroLED 75 uses a highly efficient optical system that produces a very wide and even illumination that is specifically designed to reduce individual light source glare, which can lead to discomfort and eye strain.This precision optic, coupled with the latest LED technology delivers exceptional color rendering, reproducing colors in their natural richness. The EuroLED 75 replicates the pleasing appearance of a traditional round lamp but contains all the advantages of a high efficacy, durable solid state light - giving you the best of both worlds.EuroLED 75 is available in warm or neutral white which will beautifully enhance the materials chosen for your vessel. Screw or spring mount options, pre-wired and sized for a standard cut out make new or refit installation a breeze.Hella marine EuroLED lamps are completely sealed and manufactured using the highest grade materials that will not corrode, fade or embrittle in the harsh marine environment. Innovative, ceramic based thermally conductive materials dissipate heat generated by the LED’s, thereby extending the life of the luminaire, whilst being completely corrosion free. This means you can use the same light fittings for both the interior and exterior to create a clean and consistent lighting plan.Like all Hella marine LED lamps the EuroLED 75 is supported by a 5 year warranty for complete peace of mind.Specifications: Rim material: UV resistant plastic or 316 stainless steel options Color Temperature: 5000K (White), 2700K (Warm White) Dimming: Via PWM or Voltage Resistive dimmer Cable: Pre-wired with 150mm tinned marine cable Operating Voltage: 12V or 24V DC options Power Consumption: <3W ( <0.19A @ 12V DC / <0.1A @ 24V DC) Degree of Protection: IP6K7 & IP6K9K (Completely sealed) Installation: Screw or Spring Clip options Approvals: CE, RCM Manufactured In: New Zealand This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: LED: Yes Voltage - Input Range (Volts): 24v Dimming: Yes Housing: Stainless LED Color: Warm White Box Dimensions: 2"H x 4"W x 8"L WT: 0.3 lbs UPC: 9416325238911

Read more less

Nautilus Piling Light - Spectrum RGBW/Warm White - Stainless Steel HousingSmall, clean, and versatile, Nautilus is perfect for pilings, posts, pathways, and wall-wash applications. Surface mountable with included adapter for curved for flat mounting locations. Nautilus is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from warm white or RGBW full-color output. The Nautilus light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed into a Kraken dock light system. Completely water sealed and IP67 compliant.  Specifications: Housing: Stainless Bulb Type: LED LED Color: RGBW Voltage - Input Range (Volts): 12/24v Box Dimensions: 2"H x 7"W x 8"L WT: 0.5 lbs UPC: 089300016706

Read more less

Scallop Pathway Light - Warm White - Stainless Steel HousingWith a sleek, low profile design Lumitec’s Scallop Pathway Light is the world’s first ADA-compliant, PLI-compatible, dock and pathway light. The carefully engineered beam-angle minimizes glare while cleanly illuminating walkway surfaces. Scallop is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from warm white or RGBW full-color output. The Scallop light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed in to a Kraken dock light system. Completely water sealed and IP67 compliant. Specifications: Housing: Stainless Dimming: Yes Voltage - Input Range (Volts): 12/24v LED Color: Warm White Bulb Type: LED Box Dimensions: 2"H x 7"W x 8"L WT: 0.6 lbs UPC: 089300016294

Read more less

Orbit Flush Mount Down Light - Blue Non-Dimming, Red Non-Dimming & White Dimming with White HousingLumitec's Orbit Flush Mount Down Lights are one of Lumitec's best selling down lights, the Orbit family offers a clean look and unmatched features and performance. With weatherproof construction, a shallow-depth profile (less than 1/2" below mounting surface) and an easy to install mounting system, Orbit is ideal for salons and staterooms as well as helm stations, flybridges and hard tops.The lights are fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming and multi-color control without external control modules or specialized switches. This allows the use of any "on-off" switch and eliminates the need for multiple wire runs.Specifications: Lumens (White): 210 Voltage: 10-30V DC 12v DC Amps: 290mA 24v DC Amps: 160mA Rated Watts: 4 CCT: 5000 CRI: 70+ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: LED: Yes Voltage - Input Range (Volts): 10-30v Dimming: Yes Housing: White LED Color: White/Blue/Red Box Dimensions: 3"H x 3"W x 3"L WT: 0.2 lbs UPC: 089300103611

Read more less

Mirage - Flush Mount Down Light - Glass Finish/White Bezel - 4-Color White/Red/Blue/Purple Non-DimmingLumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens).Specifications: Voltage: 10 - 30V DC 12V DC Amps: 490mA 24V DC Amps: 250mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 6 Lumens (White): 372 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 3.25" (8.25cm) Height: 3.25" (8.25cm) Depth: 1.11" (2.81cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: LED: Yes Voltage - Input Range (Volts): 10-30v Dimming: No Housing: White LED Color: White/Blue/Red/Purple Box Dimensions: 2"H x 3"W x 3"L WT: 0.2 lbs UPC: 089300103796 Brochure (pdf)

Read more less

Andros - Courtesy Light - Polished Stainless Steel Finish - Blue Non-DimmingLumitec's Andros line of accent/courtesy lights are compact, attractive, surprisingly bright. With a housing of passivated, hand polished or powder coated 316 stainless steel, use inside or out. Choose white, red, or blue light output to illuminate counters, stairs, or companionways. Completely sealed and IP67 compliant, these lights are also suitable for cockpits, hardtops, or illuminating helm stations.Specifications: Voltage: 10 - 16V DC 12V DC Amps: 45mA 24V DC Amps: NA Correlated Color Temperature: NA Color Rendering Index: NA Rated Watts: 2 Lumens (White): 19 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 1.00" (2.54cm) Height: 1.00" (2.54cm) Depth: 0.50" (1.27cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Stainless LED Color: Blue Dimming: No Box Dimensions: 2"H x 4"W x 4"L WT: 0.2 lbs UPC: 089300103093 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

X-Series X8 - Colors LEDsThe X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area.Choose either a single color version from either Midnight Blue or Ultra White or pick our Colors option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.Features:2,900 Lumens / 2,300 Fixture Lumens:Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.60° Beam AngleA wide-angled, focused beam lights up a large area of the water.Compact and simple designMade from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.Easy to CleanThanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.Fish-Strobe ModeExceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.Mounting Recommendations Boat size: up to 50' (15M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 50W Xenon Fixture Lumens* (total light output from a finished fixture): 2,300 Lumens: 2,900 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC Approx. light penetration (avg. water quality): 26' (8M) Approx. Light penetration (perfect water quality): 72' (21+M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 8.62" (219mm) x 3.07" (78mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.34kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 8 Certification: EMC Approved CE Approved: Yes Specifications:Warranty: 2 years Specifications: Mounting Style: Surface Color: Full Color RGBW Material: Polymer Box Dimensions: 3"H x 5"W x 11"L WT: 1 lbs UPC: 5051803007265 Quick Guide (pdf)Brochure (pdf)

Read more less

X-Series X8 - Midnight Blue LEDsThe X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area.Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.Features:2,900 Lumens / 2,300 Fixture Lumens:Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.60° Beam AngleA wide-angled, focused beam lights up a large area of the water.Compact and simple designMade from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.Easy to CleanThanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.Fish-Strobe ModeExceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.Mounting Recommendations Boat size: up to 50' (15M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 50W Xenon Fixture Lumens* (total light output from a finished fixture): 2,300 Lumens: 2,900 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC Approx. light penetration (avg. water quality): 26' (8M) Approx. Light penetration (perfect water quality): 72' (21+M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 8.62" (219mm) x 3.07" (78mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.34kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 8 Certification: EMC Approved CE Approved: Yes Specifications:Warranty: 2 years Specifications: Mounting Style: Surface Color: Blue Material: Polymer Box Dimensions: 3"H x 5"W x 11"L WT: 1 lbs UPC: 5051803007241 Quick Guide (pdf)Brochure (pdf)

Read more less

Sport S3116s Underwater LED Light - Midnight BlueOceanLED Sport S3116s has been designed and built for those who want to stand out. Whether cruising in the Mediterranean or fishing in The Keys, the S3116s gives dazzling performance allowing you to enjoy more time on the water.The S3116s has the most advanced optics available on the market. These optics are designed exclusively by OceanLED and offer a truly striking 90° surface beam angle with a focused 20° side beam angle providing greater water penetration, illuminating a larger area without any loss. There are other lights in the market that claim to be bright, but if you dont focus that power, you don't achieve great results and thats what sets OceanLED apart from the rest.The S3116s packs a powerful 9,840 Lumens into a small body, and when you combine that with the advanced optics, the results are truly remarkable. At least 20% brighter than our competitors and with a true 90° beam angle with no fade at the edges, the S3116s is clearly best-in-class.Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.The compact, simple design is easy to install even for the weekend DIYer. A small 12mm hole is all that's needed to run the cable through the hull. Fix 3 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.Features: 9,840 Lumens / 5,000 Fixture Lumens: Best-in-class performance from this ultra-bright light makes it the obvious choice for those who want to stand out from the crowd 90° / 20° Beam Angle: A true wide-angled, focused beam lights up a large area of the water Compact and simple design: Made from corrosion free Alu Bronze, there is a lot packed into this 10cm light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required Easy to clean: Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scrubbing each time you use it Fish-Strobe Mode: Exceptionally bright, randomised strobing of the light is proven to attract more fish and catch more bait Specifications: Boat size: Up to 65' (20M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Installation depth (to top of fixture): 8-10" (20-25cm) Light output equivalent to: 150W Metal Halide Lumens: 9840 Fixture Lumens: 5000 Typical LED life expectancy: 40,000+ Hours Minimum-Maximum operating voltage DC: 9-32V DC Current / Amp draw (DC): 12V DC 5A / 24V DC 2.4A Approx. light penetration (avg. water quality): TBC Approx. Light penetration (perfect water quality): TBC Driver type: Internal Total weight: 0.70kg Extension cable length (standard): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: AB2 Aluminium Bronze Specifications:Warranty: 2 years Specifications: Mounting Style: Surface Color: Blue Material: AB2 Aluminum Bronze Box Dimensions: 3"H x 6"W x 6"L WT: 1.6 lbs UPC: 5051803007180 Quick Guide (pdf)Brochure (pdf)

Read more less

Gen3 Warm White, RGBW Full Color 3.5” IP65 Recessed Light with White Stainless Steel Bezel - 12VDCIndoor / Outdoor Recessed 3.5” LED Light 2700K, 85 CRI Dimmable COB & RGB Color LEDThe newest generation Lunasea LED RGBWW recessed light. The same great warm white high output light of our LLB-46 line with the addition of full color mixing. The Red, Green and Blue LED’s are high power not the typical low power found in other products. Color mixing requires RGBW controller. IP65 for Indoor or Outdoor use.Use with our dimmers: LLB-45WW-91-00, LLB-45WB-91-00, LLB-45WZ-91-00, LLB-45WG-01-00, LLB-45WR-91-00.Features: High Output Warm White & Full Color 480 Lumen, 2700K Warm White equal to 40W IP65 Indoor/Outdoor Specifications: Voltage - Input Range (Volts): 12/24/32v Housing: White Bulb Type: LED LED Color: RGBW Dimming: Yes Box Dimensions: 2"H x 7"W x 8"L WT: 0.4 lbs UPC: 850001461023 Brochure (pdf)

Read more less

Contour Inset Navigation Light - Port Red - White HousingInnovation meets utility in Lumitec’s new Contour line of navigation lights. When customers asked us for a navigation light solution, Lumitec was determined to do it better. We looked at design trends in marine, automotive, and consumer products. We studied how boats are assembled and rigged. We applied the latest technologies and our deep experience. The result is a line of navigation lights that allow for fast and easy integration into tops, arches, and pilothouses, providing an immaculate and seamless look. U.S. Coast Guard approved 2nm for vessels up to 50m/165 feet. USCG 3nm is also available. Contact your sales representative for CAD models of tooling inserts to facilitate the integration of Contour lights.Specifications: Color Output: Port/Red - Inset Finish/Housing: White Voltage: 10-30 vDC 12v DC Amps: 67mA 24v DC Amps: 33mA Related Watts: 0.8W Op. Temp F/C: -31/35 to + 131/55 Height: 1 in (2.54 cm) Width: 2.67 in (6.78 cm) Depth: 1.32 in (3.35 cm) IP Rating: 67 PLI Enabled: No Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): No Color Match Commitment (CM): No CE Certified: Yes UL Certified: No USCG Rated: 2 NM

Read more less

Contour Inset Navigation Light - Starboard Green - White HousingInnovation meets utility in Lumitec’s new Contour line of navigation lights. When customers asked us for a navigation light solution, Lumitec was determined to do it better. We looked at design trends in marine, automotive, and consumer products. We studied how boats are assembled and rigged. We applied the latest technologies and our deep experience. The result is a line of navigation lights that allow for fast and easy integration into tops, arches, and pilothouses, providing an immaculate and seamless look. U.S. Coast Guard approved 2nm for vessels up to 50m/165 feet. USCG 3nm is also available. Contact your sales representative for CAD models of tooling inserts to facilitate the integration of Contour lights.Specifications: Color Output: Starboard/Green - Inset Finish/Housing: White Voltage: 10-30 vDC 12v DC Amps: 67mA 24v DC Amps: 33mA Related Watts: 0.8W Op. Temp F/C: -31/35 to + 131/55 Height: 1 in (2.54 cm) Width: 2.67 in (6.78 cm) Depth: 1.32 in (3.35 cm) IP Rating: 67 PLI Enabled: No Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): No Color Match Commitment (CM): No CE Certified: Yes UL Certified: No USCG Rated: 2 NM

Read more less

Caprera3 Spreader Light - White Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Newt - Livewell & Courtesy Light - White DimmingWet or dry, it doesn't matter. Lumitec's Newt line was originally designed as a livewell light. But when our customers saw its small size, amazing output, and ease of installation it found use under cabinets, in storage lockers, lighting toe kicks, and even overhead. Choose white, red, or blue light. Completely sealed and IP67 compliant. Silicone gasket included.Specifications: Voltage: 10 - 16V DC 12V DC Amps: 45mA 24V DC Amps: N/A Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 2 Lumens (White): 19 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 0.88" (2.22cm) Height: 0.88" (2.22cm) Depth: 0.78" (1.98cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Clear LED Color: White Dimming: Yes Box Dimensions: 1"H x 4"W x 4"L WT: 0.05 lbs UPC: 089300103475 Quick Guide (pdf)Brochure (pdf)

Read more less

Contour LED Anchor Light with Motorized Base - 39"The design says it all: unobtrusive, durable, reliable, with striking good looks. The Contour Anchor Light has the slimmest profile in the industry, a retractable locking base with a small footprint, a simple 2-wire hookup, and is constructed from durable composite plastic to reduce weight. Available in 12” shaft or 1m (39") shaft heights and U.S. Coast Guard approved for two nautical miles. Shaft length does not include the motorized base height.Features: USCG Rated - 2NM Voltage - 10-30 vDC IP Rating - IP67 White Base

Read more less

Contour LED Anchor Light with Motorized Base - 39"The design says it all: unobtrusive, durable, reliable, with striking good looks. The Contour Anchor Light has the slimmest profile in the industry, a retractable locking base with a small footprint, a simple 2-wire hookup, and is constructed from durable composite plastic to reduce weight. Available in 12” shaft or 1m (39") shaft heights and U.S. Coast Guard approved for two nautical miles. Shaft length does not include the motorized base height.Features: USCG Rated - 2NM Voltage - 10-30 vDC IP Rating - IP67 Black Base

Read more less

Capri3 Spreader Light - White/Red Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Pico C4-MAX Expansion ModulePico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories, and devices that do not have the sophisticated PLI technology built-in.The Pico C4 Module provides Poco or TTP control of third-party RGB or RGBW lighting accessories. This means that everything from strip lighting to lighted speakers can be controlled through the Poco system. On vessels not equipped with the Poco system, the Pico C4-MAX provides control of color and intensity through any normal on/off switch, using Lumitec’s field-proven TTP protocol. Specifications: CE Certified: Yes Depth: 0.88 in (2.23cm) Finish / Housing: White Height: 3.5 in (8.89cm) IP Rating: 67 Max Amp/ch: 10A Number of Channels: N/A Op. Temp F/C: -31/35 to + 131/55 PLI Enabled: Yes Sub Category: Pico Expansion Modules Timed Toggled Protocol (TTP): Yes UL Certified: No Voltage: 10vDC-30vDC Width: 3.1 in (7.87cm) Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Contour Series Navigation/Docking Combination Light - Starboard GreenInnovation – plain and simple. Lumitec’s engineers have combined a bright, sharp 1,000-lumen dock light with a U.S. Coast Guard-approved 2nm navigation light. Easy to install, great looking, and all the reliability you’ve come to expect from Lumitec.Specifications: Output: Starboard Green Visibility: USCG2NM Flood Lumens: 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A (flood) 24V DC Amps: 600mA (flood) Conforms to: ABYC A1 Specifications: Housing: White LED: Yes Lens Color: Green Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12/24v Box Dimensions: 4"H x 5"W x 5"L WT: 0.55 lbs UPC: 089300018397 Brochure (pdf)

Read more less

4-Channel Underwater Light Relay Module The SCM-PD4CH is a 4-position power distribution box that provides a convenient way to connect up to 4 Shadow-Caster™ underwater lights. Digital over-current protection for each output ensures the safe operation of multiple lights and provides an easy way to manage the relatively high current switching needs of multiple light installations.The SCM-PD4CH is housed in a compact waterproof box that is ideal for mounting in the bilge and wet locations.Features: Compact remote power control box Green/red LED indicates the status of each output channel Individual digital over-current protection for each channel Compatible with Shadow-Caster™ single and multi-color lights Recommended when installing two or more underwater lights Can be used with a helm-mounted switch or with no switch when using a compatible Shadow-Caster™ controller Blue Shadow-Caster™ backlight indicates the state 3-Year Warranty Specifications: Compatible with 12 or 24V systems Up to 10 amps per channel 5/16-18” power lugs IP67 wash down rated enclosure What's Included? 4 position power control box Mounting hardware 4 #8 PH SS x.5” Quick Guide (pdf)

Read more less

Round Accent Light RGB Black Anodized Aluminum HousingShadow-Caster®’s Round Accent Lighting “RAL” products are designed for lighting small areas around your vessel. Choose the correct product based on your mounting location and application. Shadow-Caster®’s Round Accent Lights support a variety of mounting configurations for anything from small hatches, cup holders, toe kick areas, walkway illumination, map lighting, baitwells, and cooler areas. All of Shadow-Caster’s RGB Accent Lights are designed to work with Shadow-Caster’s innovative lineup of lighting controllers.Specifications: Recommended Applications:  Cup holders and other panel mount applications  IP Rating:  IP65 Materials:  Aluminum black anodized housing and polycarbonate window  Thread:  3/8- 32  Recommended Hole Diameter:  0.41”  Current Channel:  20mA, 60mA total Voltage:  12V Only Lead Wire Length: 18"/0.5M Hardware Included:  Panel nut and star washer Specifications: Bulb Type: LED Housing: Black LED Color: RGBW Voltage - Input Range (Volts): 12v Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs UPC: 850024342309 Brochure (pdf)

Read more less

Caprera3 Spreader Light - White Non-Dimming - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

SeaBlaze Quattro Dual Color Underwater Light - White/BlueSince 2008, the SeaBlaze family of underwater lights has maintained its position as the undisputed value leader in underwater lighting. New for 2018 we proudly introduce SeaBlaze Quattro. Built on the shoulders of the world’s most popular underwater light, SeaBlaze3, and leveraging the technology of its big brother SeaBlazeX, SeaBlaze Quattro boasts more than 2000 lumens, multi-mode output including cross fade, and a marine grade bronze housing. SeaBlaze Quattro is the new standard for high-performance value in underwater lighting.Specifications: Color Ouput: White/Blue Dual Color Lumens: 2000+ TRUE measured lumens Voltage:  10-30vDC 12VDC: 2.1A 24VDC: 1.1A CCT: 6500 CRI: 70+ Dimensions: 3.85” Diameter X 0.71” D Mounting: 0.5” Diameter WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Surface Color: White/Blue Material: Bronze Watts: 25w Voltage - Input Range (Volts): 10-30v Box Dimensions: 3"H x 6"W x 6"L WT: 1.4 lbs UPC: 089300015112 Brochure (pdf)

Read more less

Accent Lighting Flex Strip 16' Terminated with 20' of Lead WireShadow-Caster® LED Lighting offers a variety of color-changing LED accent lighting strips to illuminate your boat or outdoor lighting project and choosing which type is dependent on how and where the lights will be mounted. Shadow Caster’s® SCM-AL-LED strip is best when mounted out of direct view. Shadow-Caster® Neon versions are recommended where the strip will be directly visible as they have an integrated light diffuser that creates a pleasant continuous lighting look. The correct neon choice is driven by the geometry and bend direction where they will be mounted.WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12/24v Housing: Clear LED Color: RGBW Dimming: Yes Box Dimensions: 2"H x 8"W x 8"L WT: 1.5 lbs UPC: 855726005163

Read more less

Rail2 12" Light - 3-Color Red/Blue Non Dimming with White DimmingLumitec's original rail light amazed customers when it was first introduced in 2008. With up to 3 times greater output than its predecessor and a sleek look, Rail2 raises the bar. The integrated microprocessor controls dimming and color change from two wires, with no external control modules. As with all Lumitec luminaires, the Rail2 is IP67 compliant, which means despite its great looks it is just at home on a spray-drenched hard top as a teak-adorned salon. Proudly made in the USA.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 920mA 24V DC Amps: 430mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Lumens (White): 490 Rated Watts: 12 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 11.72" (29.76cm) Height: 1.11" (2.82cm) Depth: 0.60" (1.53cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12/24v Housing: White LED Color: White/Blue/Red Dimming: Yes Box Dimensions: 2"H x 3"W x 14"L WT: 0.35 lbs UPC: 089300012432 Quick Guide (pdf)

Read more less

Mirage - Flush Mount Down Light - Glass Finish/No Bezel - Warm White DimmingLumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens).Specifications: Voltage: 10 - 30V DC 12V DC Amps: 500mA 24V DC Amps: 270mA Correlated Color Temperature: 3000 Color Rendering Index: 90+ Rated Watts: 6 Lumens (White): 290 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 2.50" (6.35cm) Height: 2.50" (6.35cm) Depth: 1.11" (2.81cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: LED: Yes Voltage - Input Range (Volts): 10-30v Dimming: Yes LED Color: Warm White Box Dimensions: 2"H x 3"W x 3"L WT: 0.2 lbs UPC: 089300103925 Brochure (pdf)

Read more less

LED Dome Light - Traditional - Stainless Steel - 5.5" - 12VTraditional surface mount stainless steel dome light.  Side mounted on/off switch. Features 20 each SMD 2835 warm white (4000k) LEDs.Features: Prismatic plastic lens 229 Lumens 12V - 1.7W 150° Beam Angle Output compares with a 20 Watt Halogen bulb

Read more less

Wire Harness f/Dually PairThis 14' wiring harness is designed to connect a pair of Dually LED lights to your 12V electrical system. It features battery terminals on one end and Deutsch connectors on the other to connect to the lights. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Pair).Features: 18 AWG Wire Deutsch Connector Inline Fuse Holder

Read more less

Capri2 - Flush Mount LED Flood Light - 2-Color White/Blue DimmingWhat do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Capri2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep© technology puts the light where you need it most, providing for up to twice the useable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USA.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 16 Lumens (White): 1000 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.49" (11.41cm) Height: 1.65" (4.20cm) Depth: 2.83" (7.20cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 2"H x 4"W x 7"L WT: 0.6 lbs UPC: 089300103673 Quick Guide (pdf)Brochure (pdf)

Read more less