Contour Series Inset Navigation Light - Starboard GreenContour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern.Features: Output: Starboard Green  Visibility: USCG2NM Voltage: 10-30V DC 12V DC Amps: 18-26mA 24V DC Amps: 12-15mA Conforms to: ABYC A16 Specifications: Housing: White Lens Color: Green Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 1"H x 3"W x 3"L WT: 0.1 lbs UPC: 089300015754 Brochure (pdf)

Read more less

Mounting Plate for RCL-95 SearchlightThe RCL-95 mounting plate included in this kit features multiple mounting hole patterns that enable a seamless switch to a RCL-95 searchlight.   No additional mounting holes are required.Compatible With: GOLIGHT® Stryker or RadioRay searchlights with the ACR RCL-95 Searchlight.  Note -  This kit will not work for the RadioRay portable version.*Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 1"H x 7"W x 7"L WT: 0.45 lbs UPC: 791659096390

Read more less

LightLink LL-101 Marine Dimming ModulePart #: LL-101Operation is simple! Press and hold the momentary switch to initiate dimming cycle. Dimming cycle continues to dim as long as switch is engaged, ranging from 100% to approximately 5% intensity holding 2 seconds at each position before dimming the opposite direction. Briefly press and release momentary switch for on/off operation.Specifications: Input Voltage: 6-36 Volt DC Dimensions: Width: 1.5" x Height: 0.5" x Depth: 1.0" Features: Compatible with i2Systems Apeiron, Ember and Profile lights Dimming control via a momentary switch or contact Small size, encapsulated, fits into most switch boxes The LL-101 means that no matter what level you have the lights at when you turn them off, they will resume at full brightness when turned back on. The LightLink LL-101 is capable of dimming and controlling up to (20) i2Systems Fixtures, including: Apeiron A1110 Apeiron A2162 Ember E1150 Profile P1100 (20') i2SystemsS-Line S1200 Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 4"L WT: 0.4 lbs Quick Guide (pdf)

Read more less

Flush Mount Spreader Light - BlackThe third-generation flush-mounted spreader light features five 3-watt LEDs to provide plenty of illumination. Composite trim ring snaps over housing for a finished look.  Mounts with two screws, concealed by the trim ring, on either side of the fixture. This latest version adds one more LED for a total of 5. The redesign still allows this updated model to fit in the same cut-out as the older models, to make upgrades easy.Features:   12/24 V - 12 W Polycarbonate Lens UV Resistant Hidden Mounting Screws Cool white LED color (5,500 - 6,300K) Temperature of LED: less than 158° with 77° ambient temperature Five 3 Watt Samsung 3535 LEDs 1,000 Lumens Equivalent to 120 Watt Halogen bulbs LED Lifetime: 50,000 Hours LED Beam angle: 110° 0.8 Amp draw at 12 Volt IP68 Fits the previous cutout Dimensions: 6” W x 2-1/2” H x 1-3/4” D Cutout: 4-1/2” W x 1-1/2” H

Read more less

16" Scan-Strip 4 Color LED Light - RGBWThis 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.Features: Switching off for more than 4 seconds resets the color to white RGBW LEDs Colors are daylight white (4000-4500K), blue, red, green Lifespan 30,000+ Hours 12/24 Volt IP65 can be installed in engine rooms and exterior locations Ideal for under-gunwale lighting SS Mounting Screws Included Specifications: Beam Angle: 120°  Watts: 2.4 Lumens: 180 Dimensions (L X W x H) (inch): 16" x 7/8" x 1/2" *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 4"W x 17"L WT: 0.2 lbs UPC: 786142416519

Read more less

Mirage - Flush Mount Down Light - Glass Finish/White Bezel - Warm White DimmingLumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens).Specifications: Voltage: 10 - 30V DC 12V DC Amps: 500mA 24V DC Amps: 270mA Correlated Color Temperature: 3000 Color Rendering Index: 90+ Rated Watts: 6 Lumens (White): 290 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 3.25" (8.25cm) Height: 3.25" (8.25cm) Depth: 1.11" (2.81cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: LED: Yes Voltage - Input Range (Volts): 10-30v Dimming: Yes Housing: White LED Color: Warm White Box Dimensions: 2"H x 3"W x 3"L WT: 0.2 lbs UPC: 089300103857 Brochure (pdf)

Read more less

E-Series Lens Cover 6" - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

E-Series PRO 30" Spot-Flood Combo LED - WhiteThe E-Series is one of RIGID's most versatile, all-around lighting solutions, and recent enhancements in LED technology delivering up to 111% more raw lumens than ever before with the E-Series PRO. Among RIGID's most popular product lines, the E-Series PRO has recently benefited from several upgrades to improve both looks and performance. Plus, new branding and new blacked-out circuit boards give the E-Series PRO a more refined look. Available with your choice of optics, the E-Series features a host of beam options, including Spot, Flood, Driving, Hyperspot, Diffused, and new Driving/Spot and Spot/Hyperspot combinations. These and other innovations make it one of the brightest and most efficient LED light bars on the market. The E-Series was born in off-road, but its versatility makes it well suited for use with power sports, marine, general automotive and even first responder applications.Features: Optics: Hybrid - Spot / Flood Combo LED Color: White Finish Color:White Length: 30" Mount Type: Surface Shipping Dimensions: 6" × 33.25" × 6" Product Weight: 8.78lb Sold As: Single Specifications: Watts: 165 Amp Draw: 11.96 LED's: 60 Raw Lumens: 13800 Lux @ 10M: 4010.0 Beam Distance: 1266.5M Peak Beam Intensity: 401,000 cd Specifications: Beam Pattern: Spot-Flood Combo Length (Inches): 30" Housing: White Voltage - Input Range (Volts): 12v Box Dimensions: 7"H x 7"W x 34"L WT: 12.5 lbs UPC: 849774029455 Brochure (pdf)

Read more less

Radiance + Curved 50" Light Bar - RGBWThe stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ Curved RBGW light bars. The latest addition to the Radiance light family provides the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ Curved RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary RDS-Series but include a stylish color-changing backlight.Inside, the Radiance+ Curved RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ Curved RGBW light bars take the customization of your vehicle to the next level. Own the night in style with Radiance+ RBGW lighting.Features: 8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode) Backlighting is independently controlled using switch logic. Fits All RDS-Series Light Covers And Mounts Black exposed printed circuit board 10-year warranty 9-15 V DC Black powder coat finish Pressure equalizing vent IP68 compliant - dust and water ingress High-grade aluminum alloy housing and heat sink Over/under voltage protection high-impact polycarbonate lens Mounting brackets are included RFI/EMI protection Rohs compliant Off-road use only Product Comes with: 50-inch Radiance+ RGBW light bar Harness Mounting brackets Media pack Specifications: Size (inch): 50"  Weight (Lbs): 14.20 Optics: Spot drive Watts: 230     Amp Draw: 16.4 Raw Lumens: 21384 Specifications: Beam Pattern: Spot-Driving Combo Housing: Black Length (Inches): 50" Voltage - Input Range (Volts): 12v Box Dimensions: 5"H x 10"W x 54"L WT: 17.85 lbs UPC: 849774034220

Read more less

40" Adapt E-Series Lightbar - BlackThe RIGID Adapt E-Series LED Light Bar features the same style and construction as RIGID’s legendary E-Series, from the high-strength aluminum heat sink to the unbreakable polycarbonate lens. On the inside, however, the Adapt E-Series contains cutting-edge technology. The Adapt E-Series takes off-road lighting performance to a whole new level with two layers of adaptive response to your vehicle and driving conditions. Features: Harness, Switch & Relay Included 3 Optic Zones - Scene, Driving, Spot Seamless Beam Transition Slow Speed, Moderate Speed & High Speed Beam Patterns 9-36 VDC Two Layers of Adaptive Response Active Power Management™ System - Power Capacity Sensing Active View Technology™ - Internal GPS Module Use In Adapt Mode Or All On Alloy Housing and Heatsink Unbreakable Polycarbonate Lens Pressure Equalizing Vent Black Exposed Printed Circuit Board Patented Optics 50,000 Hr+ LED Lifespan Off Road Use Only In the Box: Stainless Steel Mounting Brackets Hardware Kit Wire Harness Relay Switch Install Instructions ∗ Sold as an Individual  Specifications: Voltage - Input Range (Volts): 12v Length (Inches): 40" Housing: Black Box Dimensions: 7"H x 7"W x 44"L WT: 15.75 lbs UPC: 849774033162 Brochure (pdf)

Read more less

20" Adapt™ Light Bar - BlackThe Adapt™ LED Light Bars are the world’s first off-road lighting products that can change instantly according to conditions. Adapt offers 8 selectable beam patterns that range from a 90 degree broad short-distance beam to a highly focused 15 degree long-distance spot beam in a single fixture. It also includes RIGID’s new Active View™ Technology, which allows the beam pattern to actively adjust with vehicle speed. There are no moving parts within the Adapt. Instead, RIGID uses advanced LED technology and combines it with optics to create a revolutionary lighting solution that can Adapt with changing conditions. Further, Adapt has built-in accent lighting that can be set to any color in the light spectrum, including white, for a custom look around town. The Adapt has a signature new look that is unlike any other light bar on the market, and it even has expanded mounting capabilities that include new base-mounting options in addition to traditional side mounts. Adapt LED light bars include a RIGID Dash Controller, which is a molded backlit dash-mounted unit that offers easy, intuitive control of Adapt’s beam patterns, Adaptive Mode, accent lighting, and programmable presets. RIGID Adapt Light Bars are available in 10-inch to 50-inch lengths and include a RIGID Dash Controller, Under Dash Module, wiring harness, and mounting hardware. With the RIGID Adapt, it has never been easier to Own the Night.*GPS Module Kit IncludedFeatures: Active View Technology - Automatically Change Beam Patterns Based On Vehicle Speed (ADAPT GPS Module Required) Dash Controller with Wiring Harness 8 Selectable Beam Patterns From 15-Degrees to 90-Degrees Integrated Optic Design with Spot, Flood, and Driving Zones Selectable RGB-W Accent Lighting – Choose From Any Color in the Light Spectrum Back Lit Molded Dash Controller - Enables User to Select Mode, Accent Color, Adaptive Mode, and Select Between 2 User Presets 2 User Presets – Preset Both Beam Pattern Mode & Accent Lighting Colors Multiple Mounting Locations; Traditional Side Mounting or Underside Low-Profile Mount Specifications: Length (Inches): 20" Housing: Black Voltage - Input Range (Volts): 12v Box Dimensions: 7"H x 8"W x 24"L WT: 13.7 lbs UPC: 849774031724 Owner's Manual (pdf)Brochure (pdf)

Read more less

M6 Gen2 Mast Light - Surface Mount - Warm WhiteThe M6 Gen2 Mast Series light from OceanLED is 50% brighter than its previous model with an improved design.The narrow beam angle helps focus the powerful LEDs, enhancing the natural beauty of your vessel, making It perfect for illuminating your rigging.RiggingSuitable for aluminium, steel and composite rigs on all sizes of boats ranging from sport fishing to larger yachts.Easy to install, sturdy, weatherproof and exceptionally easy to maintain. Ultra low power draw, reverse polarity protection.Features: 38° Top Beam Up to 660 Fixture Lumens 38° Side Beam Circular Beam 1/2” (13mm) Hole 12/24vDC 40,000+ Hour Life Active Thermal Control Compact simple design Easy to clean Factory Sealed Unit No Breakable Parts Color: Warm White Specifications:Warranty: 2 years Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12/24v Housing: Clear LED Color: Warm White Dimming: No Box Dimensions: 3"H x 5"W x 11"L WT: 1.3 lbs UPC: 5051803007333 Brochure (pdf)

Read more less

Double Contact Bayonet BulbFeatures: Clear Type T-8 C-8 Filament - 1-3/8 inch L.C.L. Voltage: 120 Wattage: 30 Candella: 24 Weight: 1 oz.

Read more less

GT Series LED Hybrid Portable Light with Magnetic Shoe Mount Handheld Wireless Remote - 12V - WhiteGolight GT Series Upgrades: Updated exterior housing design More precise pan/tilt control Portable magnetic shoe models now have 2x the grip Permanent mount models now boast a 14-gauge stainless steel mounting bracket Enhanced resistance levels associated with shock, vibration, and impact Features: Wireless or Hardwired Remote Control Options Permanent or Portable Mounting Options Permanent: Stainless Steel Mounting Bracket Portable: Industrial Strength Magnetic Grip 370 degree Rotation x 135 degree Tilt Halogen or LED Ingress Protection from Dust (IP56) High Torque Drive Train with Precise Pan/Tilt Control UV Ray and Saltwater Resistant 3-Year Limited Warranty Specifications: LED Hybrid 10 High Flux LEDs 15-degree Beam Angle 300,000 Candela Max Beam Distance 3,593' 3.7 Amps at 13.8V

Read more less

Portable, safe, and easy to use, this remote-controlled bow light attaches quickly and securely to any 2- or 3-pin bow socket. Bi-color navigational light kicks out 1,000 lumens of bright light from its position atop the 12" stanchion. Remote control features 16 security settings. 360 degree rotation, 90 degree tilt. 80,000 Candela Beam Intensity. Also includes a heavy nylon case. Specifications: Wireless: Yes Box Dimensions: 7"H x 8"W x 19"L WT: 4.65 lbs UPC: 793523021514 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Radioray GT Series Permanent Mount - White LED - Wireless Handheld RemoteThe GT series is the culmination of our dedication to continual improvement. The GT series incorporates all of the features that have made Golight the industry standard in remote control lighting, but incorporates upgrades that enhance the lamp’s durability as well as the overall user experience. GT SERIES UPGRADES: Updated exterior housing design Higher torque drivetrain and more precise pan / tilt control  Increased Ingress protection from dust/water (IP56)  Permanent mount models boast a robust 14 gauge stainless steel mounting bracket Portable magnetic models have 2X magnetic grip Enhanced resistance levels associated with shock, vibration, and impact 10 High Flux LED’s GT SERIES FEATURES: Wireless or Hardwired Remote Control Options Permanent or Portable Mounting Options Halogen or LED Light Head 370° Rotation x 135° Tilt UV Ray and Saltwater Resistant 3 Year Limited Warranty Quick Guide (pdf)

Read more less

2" Ultraviolet LED Pod Light - Flood Optics - Pro Series 3.0 - 12WGet the most out of your night fishing with the Ultraviolet Pod Lights. Utilizing our 3W Osram LEDs, this series was designed to make your fluorescent fishing line glow. Easily hook up to any 12V setup with the light having a voltage range of 9-36V DC.Wire two Pod Lights together with our 2-piece connect cable, or up to four Pod Lights with our 4-piece connect cable.Specifications: Total Wattage - 12W Total Amp Draw - 1.1 Operating Voltage - 10 - 30V DC LED Diode Qty - 4 LED Chip - Osram Beam Pattern - Flood Beam Angle - 45° - Flood Life Expectancy - 50,000 Hours Operating Temp -  -40° to 145° F -40° to 62° C Waterproof Rating - IP69K Cord Length From Light - 16" Wire Harness Included? -  Yes Wire Harness Length - 12' Wire Gauge - 16 Fuse Size - 5 Amp Connector Type - 2 Pin Deutsch Hole Size for Switch - 3/4" Mounting Bolt Size - 5/16" Includes: 2 Inch Pod Light With Flood Optics Complete Wiring Harness with fuse, relay, and switch Mounting brackets All hardware is ready to install

Read more less

Capri3 Spreader Light - White/Blue Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Red LED - Black Plastic Bezel - 12VAttractive, energy efficient lighting for interior and exterior use.Hella Marine round LED courtesy lamps can be installed almost anywhere on board.Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure. Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer. Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable) Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Black LED Color: Red Dimming: No Box Dimensions: 2"H x 4"W x 8"L WT: 0.17 lbs UPC: 9416325165101

Read more less

Maxillumeh60 - Flush Mount Flood Light - White Housing - White DimmingCustomers with high expectations, from the world's top custom yacht builders to the US Coast Guard, have relied on Lumitec's Maxillume line of flood lights for nearly a decade. Packing more than 6,000 TRUE lumens+, the Maxillume h60 boasts twice the output of previous models, new mounting options and our tried and tested internal dimmer control. Each light is designed, hand assembled, and tested at our USA manufacturing facility.Specifications: Lumens (White): 6000 Voltage: 10-30V DC 12V DC Amps: 5A 24V DC Amps: 2.5A Rated Watts: 60 CCT: 5000 CRI: 70+ Length: N/A Width: 8.3in (21.08cm) Depth: 2.6in (6.6cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 60w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 4"H x 5"W x 10"L WT: 2.2 lbs UPC: 089300013361

Read more less

Low Pro™ Marine Spreader Light - Flush Mount - White Housing - Red LEDThe Most Advanced Marine Spreader Light! The Low Pro™ Spreader is crafted for maximum functionality and ease of use, giving you complete control over your lighting with three built-in settings. Operated through any standard or digital switch, you can toggle between 100% brightness, 50% brightness, or halo-only without needing separate dimmers or specialty switches. These integrated features make achieving the perfect lighting for any situation effortless.The Low Pro™ Spreader Light enhances your boat's style with its sleek and bold design, offering functionality and sophistication. The integrated halo ring lighting adds a clean, modern touch, making it a standout feature for any marine vessel. More than just an aesthetic upgrade, the halo accent light is practical too—providing subtle, ambient lighting that’s perfect for nighttime docking, fishing, or creating a refined atmosphere. Whether you're looking for the best customizable marine lighting or a way to elevate your boat's appearance, the Low Pro™ Spreader delivers on all fronts.Select the Setting You WantEasily customize your lighting with a simple toggle of the switch. The first toggle activates the spreader at 100% brightness for full illumination. The second toggle on/off reduces it by 50% for a softer glow, and the third toggle on/off powers only the halo ring for a stylish accent or subtle nighttime visibility. Not Just for LooksThe halo feature is more than just a bold accent for your boat - it's also a practical lighting solution. Power up the halo at night to softly illuminate the deck without compromising your night vision. Ready to light up your whole boat?Built to LastEngineered to endure the harshest environments, these lights are designed to meet IP69K standards - the highest level of protection against water, dust, salt, condensation, and extreme temperatures. Whether facing salt spray, blazing sun, snow, or high-pressure water, they deliver reliable performance every time. Built for durability and backed by our lifetime warranty, trust you're investing in quality that lasts as long as your adventures! Brightest Spreader on the MarketThe Low Pro™ Spreader delivers unparalleled brightness for its size, making it the brightest marine spreader available, ideal for professional and recreational boaters. With an impressive 2,000 lumens and a wide 120-degree beam pattern, it ensures maximum visibility for every task.Features: Customizable Light Settings: Easily toggle between 100%, 50%, or Halo-only modes to suit your needs. Accent Halo Options: Available in white, blue, red, or amber to match your style or function.  High-Performance Brightness: Produces 2,000 lumens for superior illumination.  Wide Coverage: Features a 120° beam spread to light up large areas with ease.  Marine-Grade Durability: Built with IP69K waterproof housing to withstand harsh marine environments. Easy Integration: Connect seamlessly to your digital or physical switch for hassle-free control.  Versatile Power Compatibility: Operates on a wide range of 9-36V DC inputs.  High-Grade Polycarbonate Bezel: Designed to easily snap on, the bezel conceals all mounting hardware for a clean, seamless finish. Unlike a powder-coated finish, it resists fading and flaking over time, even in the toughest saltwater environments. Plug-and-Play: Engineered with a footprint similar to most standard spreader lights, allowing for easy easy installation without the need for custom modifications. What's in the Box? Flush-Mount Low Pro™ Spreader Light 3/16 Stainless Steel Mounting Screws Specifications: Color: White Box Dimensions: 3"H x 4"W x 7"L WT: 0.5 lbs UPC: 850044517800

Read more less

Low Profile Marine Bar - Spot - WhiteTHE LOWEST PROFILE MARINE LED LIGHT BAR ON THE MARKETThe Black Oak Low Pro Light Bar – the lowest profile light bar on the market, designed with a streamlined look that mounts flush to your boat. Engineered with built-in dimming, adjustable feet to set the light at the perfect angle, and an IP69 rating for ultimate resistance against saltwater and extreme conditions.With 18 ultra-bright LEDs delivering an impressive 12,000 lumens, this light bar defies its slim size with massive light output. Backed by Black Oak's comprehensive lifetime warranty, the Low Pro Light Bar offers the perfect fusion of style, performance, and durability.Adjustable FeetSet your light at the perfect angle to avoid bow glare and direct the beam exactly where you want it, even if you plan on under-mounting, we have a wide variety of angled feet available to suit your vessel perfectly.Dimmable LEDs Easily control Lowpro's 12,000+ true Lumens with the flip of a switch—there's no need for third-party remotes or dimming controls. Our cool core heat sync keeps OSRAM LEDS cool to allow maximum output for as long as you need it.IP-69 Waterproof HousingThis light bar was engineered to withstand the harshest marine elements, it has been thoroughly tested and has achieved an industry-best IP-69 rating, allowing it to be completely submerged without an issue.Easy to InstallThe Lowpro Light Bar is designed to mount to any type of boat or T-top and is thoughtfully crafted with long cords for easy integration to your boats power supply. Need more light? Lowpro can be mounted in an array pattern.Do It At NightSee more than your competition, Turn night into day, and put your mind at ease with the ability to see channel markers, boats, buoys, and other hazardous objects. The Lowpro Light Bar is 20% brighter than any other low-profile light on the market.Marine RatedThe Lowpro Light Bar is built to last. Its die-cast aluminum housing and DuPont powder coating is designed to withstand heavy doses of salt water, and UV radiation and can even be immersion up to 3 feet for over 60 hours.What's In The Box? Surface Mount Light 4' Attached Tinned Copper Cord 2 Standard Foot Mounts 316 Stainless Steel Hardware Features: Insanely Bright - 12,000+ TRUE measured lumens Dimmable intensity Adjustable angled foot attachments Lifetime Warranty Powered by 18 OSRAM LEDs 4 Foot cord for easy installs Marine-grade waterproof housing Baricoat Ceramic Shield Technology Lifetime Support Powder-Coated Die Cast Aluminum Construction Available in flood or spot configurations Marine grade IP69K waterproof housing Specifications: Beam Pattern: Spot Housing: White Length (Inches): 19" Voltage - Input Range (Volts): 12v Box Dimensions: 3"H x 6"W x 22"L WT: 3.85 lbs UPC: 850044517725

Read more less

SC2 Series Bronze Surface Mount Underwater Light - Full-Color The SC2 underwater light provides a vessel with 24 watts of intense LED lighting. The SC2s are designed with a sub-compact 2.99" bronze housing for under-the-waterline surface mounting. Single-color and color-changing versions are available with variable brightness and a wide array of control options. This underwater light has a full-color (RGBW) color output.Features: A proprietary clear gel-filled design, injected through the entire unit, eliminates condensation and/or water intrusion under stress Tough, scratch-resistant, tempered glass lens with bronze housing—impervious to acetone, solvents, and demanding marine environments Transient surge and reverse polarity protection dramatically prolong unit life Thermal throttling technology enables safe operation even in water From simple on-off to full-feature lighting effects, the unit is enabled for a host of control interfaces Specifications: Color: Full color (RGBW) Up to 3,000 lumens 120-degree beam angle 24-watt power draw 2 amps of operating current draw @ 12V 10-30 volts input 2.99” (75.9mm) outside diameter IP68 fully submersible waterproof design Includes: Lighting unit 3’ (1m) submersible grade cable 3 mounting screws 3-year standard warranty 2 Control Options: Power Toggle Control - Quickly toggle the power source to advance to the next color or brightness level  Add Shadow-NET™ Control - Dramatic, full-feature control through your Multifunction Display (MFD) by adding the Light Commander Shadow-NET™ control module (SCM-LC-PLUS) and app Specifications: Color: Full Color RGBW Material: Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 24 Box Dimensions: 3"H x 5"W x 8"L WT: 0.9 lbs UPC: 8500243426138 Quick Guide (pdf)

Read more less

E500 Engine Room Light - 10-30V - Cool WhiteThe E-500 is a multi-voltage (12/24V), surface-mounted engine room light that offers an impact-resistant PC lens, which allows the wires to exit straight back through the mounting surface or routed to the side through the end cap. Featuring a total of 50 LEDs, this fixture produces an impressive 1,520 lumens, comparable to a 220W standard bulb. Drawing only 1.5 amps (12V), this fixture is often used in multiple quantities to eliminate any dark spots in the engine room.Features: 12/24 Volt, 18 Watt Surface Mount (hardware included) Specifications: LED Quantity: 50 (5 rows of 10 LEDs) Lumens: 1,520 Protection: IP65 LED Type: SMD5630 cool white (5,500K-6,300K) Beam Angle: 180° *The "P" within the part number indicates retail packaging Specifications: Bulb Type: LED Housing: Clear LED Color: Cool White Voltage - Input Range (Volts): 12/24v Box Dimensions: 2"H x 5"W x 17"L WT: 0.9 lbs UPC: 786142413891

Read more less

Pro Series 3.0 Double Row 10" LED Light Bar - Combo Optics - White HousingThis beautiful white powder-coated light is the perfect addition to any white automobile, boat, ATV, or anything else users can mount a light bar on! The 10-inch Cree light bar is Black Oak's most popular light by a landslide! With its compact yet over-achieving attitude, this aggressive light fits literally anywhere! Cars, trucks, snowmobiles, lawnmowers, tractors, trailers, etc. This powerful light will send most full-size light bars back home to their momma. Versatility and compact power are what Black Oak strived for when constructing the Marine LED light bar, letting users mount this baby right out of the box with sturdy mounting brackets, stainless hardware, and a wiring harness included! Made only with materials at the forefront of the market, the 10-inch Cree light bar showcases an IP69K rating, allowing users to completely pound it with water, ice, saltwater, and especially sheer brute force. With a total height of 4.125 inches, this Marine LED light bar fits just about anywhere while putting out a crazy amount of luminous light!Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Premium Dupont powder-coating for the highest quality and most resistant finish Combination Flood/Spot light pattern offers a superior lighting pattern Multi-mount brackets made of 9 gauge marine grade Stainless Steel Lens cover made of Lexan with a UV protectant Activities & Uses:  Perfect Duck boat bow light Marine spot light ATV or UTV brush guard lights Front bumper truck lights Technical Specifications: Total Wattage: 200W Amp. Draw: 4.1 LED Quantity: 20 Weight: 5.2 lbs. Raw Lumens: 13,200 Warranty: Lifetime IP Rating: IP69K     Connection: Deutsch connector Dimensions with Mounting Bracket (Width x Height) – 11.4" x 4.125" In the Box: Light bar Complete wiring harness with fuse, relay, and switch 12 gauge wire Mounting brackets All hardware is ready to install! *Sold as an Individual Specifications: Beam Pattern: Spot-Flood Combo Housing: White Length (Inches): 10" Voltage - Input Range (Volts): 12v Box Dimensions: 4"H x 9"W x 16"L WT: 5.4 lbs UPC: 850044517589

Read more less

4" Marine Spreader Light - Flood Optics - White Housing - Pro Series 3.0Black Oak 4" Marine Spreader Light Flood Scene - White Housing - Pro Series 3.0Designed and tested at a big name boat builder next door to Black Oak in Sarasota, Florida, this 4" spreader is perfect for those die-hard fishermen who love those late nights and early mornings. With a whopping 3,120 raw lumens, users no longer have to worry about rigging rods in complete darkness. This version has a 120° throw, much wider than the 45° throw of Black Oak's standard flood version. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Flood optics 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader light (bow/stern) Aft deck fishing lights    Foredeck lights Overheard lighting (marine/non-marine use) Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 0.35 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Width x Height): 5" x 2.13" x 2.15”  In the Box: Marine spreader light (1) Wiring pigtail with 2-pin waterproof deutsch connector  Mounting hardware required to install *Sold as an Individual Specifications: Bulb Watts: 20 LED: Yes Box Dimensions: 5"H x 5"W x 7"L WT: 1.2 lbs UPC: 850044517275

Read more less

Pro Series 3.0 Curved Double Row 40" LED Light Bar - Combo Optics - White HousingThis 40-inch curved light bar demands respect from anything in the water. Sporting the brightest and most advanced 5-watt LEDs. This all-white waterproof LED light bar is the perfect addition to boats, jeeps, trucks, or even yard lights to illuminate with day-light brightness! Flaunting an IP69K rating, this light can withstand whatever users splash, throw, freeze, or submerge it under. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Premium Dupont powder-coating for the highest quality and most resistant finish Combination Flood/Spot light pattern offers a superior lighting pattern Multi-mount brackets made of 9 gauge marine grade Stainless Steel Lens cover made of Lexan with a UV protectant Activities & Uses:  Spot channel markers over 1800 meters away! UTV roof mount Dunes and desert riding Roof rack lighting (white tacoma) T-top light Technical Specifications: Total Wattage: 400W Amp. Draw: 17.8 LED Quantity: 40 Weight: 13.8 lbs. Raw Lumens: 52,800 Warranty: Lifetime IP Rating: IP69K     Connection: Deutsch connector Dimensions with Mounting Bracket (Width x Height): 41.4" x 4.125"  In the Box: Light bar Complete wiring harness with fuse, relay, and switch 12 gauge wire Mounting brackets All hardware is ready to install! *Sold as an Individual Specifications: Beam Pattern: Spot-Flood Combo Housing: White Length (Inches): 40" Voltage - Input Range (Volts): 12v Box Dimensions: 6"H x 8"W x 46"L WT: 14.45 lbs UPC: 850044517220

Read more less

Sport S3166s Multi-Color Surface Mount Underwater LED LightOceanLED Sport S3166s has been designed and built for those who want to stand out. Whether cruising in the Mediterranean or fishing in The Keys, the S3166s Multi-Color gives dazzling performance allowing you to enjoy more time on the water.The Sport Multi-Color is full RGBW and allows you to choose any color you wish or scroll through the spectrum. Whether fishing or enjoying time on the water with friends of family, you can choose the perfect color for the mood.The S3166s has the most advanced optics available on the market. These optics are designed exclusively by OceanLED and offer a truly striking 90Ëš surface beam angle with a focused 20Ëš side beam angle providing greater water penetration, illuminating a larger area without any loss. There are other lights in the market that claim to be bright, but if you don’t focus that power, you don’t achieve great results and that’s what sets OceanLED apart from the rest.The S3166s packs a powerful 3,500 fixture lumens into a small body and has more dedicated LED’s per color than leading competitor models. When you combine that with the advanced optics, the results are truly remarkable.Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.The compact, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that’s needed to run the cable through the hull. Fix 3 screws and that’s the hard work done! Simply attach to 12V and you are ready to light up your world.Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.Features:  3,500 Fixture Lumens/8448 Lumens Best-in-class performance from this ultra-bright light makes it the obvious choice for those who want to stand out from the crowd. 90°/20° Beam Angle A true wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from corrosion resistant Alu Bronze, there is a lot packed into this 10cm light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Benefits: Ultra-bright, best-in-class performance. Advanced optics and a focused beam illuminate a greater area. Choose any color you wish or scroll through the RGBW spectrum. Compact and simple design makes it quick and easy to install on virtually any boat. Specifications:Warranty: 2 years Specifications: Mounting Style: Surface Color: Full Color RGBW Material: AB2 Aluminum Bronze Box Dimensions: 3"H x 6"W x 7"L WT: 1.6 lbs UPC: 5051803007470 Quick Guide (pdf)Brochure (pdf)

Read more less

Navilight Tricolor 2NM with Scotty BaseNavilight Tricolor Scotty 2NM - US Coast Guard approved for 2 nautical miles is fully compatible with the Scotty Deck Mounting system and includes a green light to be shown at the starboard side and a red light to be shown at the port side. In addition, it includes the white Sternlight, to be used at the stern. It is battery operated, uses super bright LED light, is water proof and floats.The green as well as the red lights show an unbroken light over an arc of the horizon of 112,5 degrees. The white Sternlight shows an unbroken light over an arc of the horizon of 135 degrees. All lights work independently, in a combination of all three or red/green together.Examples of usage, based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGs.On a power-driven vessel of 12 meters or more in length but less than 50 meters in length: As green or red sidelight As sternlight On a power-driven vessel of less than 12 meters in length: As green or red sidelight As combined green/red As sternlight On a sailing vessel underway: As green or red sidelight As sternlight On a sailing vessel of less than 20 meters in lengths as backup light:TriColor lantern at or near the top of the mastSpecifications: USCG Approval, 2 Nautical Miles 5 Modes: Tricolor Masthead light (135° white, 112,5° red, 112,5° green), BiColor side light, red side light, green side light, white Sternlight Floatable, waterproof (20 m) and air-tight For use with Scotty Flush Deck Mounting system Powered by three AAA batteries (not included) Size: H = 85 mm, O = 68 mm Weight (net): 91 g Modes/Approximate Burn Time 16 green/red/white LED, 360° Tricolor lantern/12hrs 10 green/red LED, 225° Bi-Color sidelight/20hrs 5 green or 5 red LED, 112,5° sidelight/38hrs 6 white LED, 135° Sternlight/32hrs Mounting System:The Navilight Tricolor Scotty is designed to fit into the Scotty Deck Mounting system (Side/Deck Mounts, Flush Mounts) and requires no additional adapters.  Specifications: LED: Yes Housing: Black Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) Visible Range (Miles): 2nm Lens Color: White/Red/Green Box Dimensions: 3"H x 4"W x 4"L WT: 0.29 lbs UPC: 814154018817

Read more less

Attwood LightArmor Plug-In Base - 2 Pin - Black - RectangleINTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for.A Sure FitThe new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or traileringKey Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

LED All Around Light - 42" PoleAttwood's LED All-Round Light uses the very latest in bright white LED technology. 30% brighter than traditional LED lights with 60% lower mass which eliminates wobble. Improved lens technology provides a cleaner light transmission. LED technology keeps lights cool to the touch and is rated for 50,000+ hours of use. Provides 2-mile, 360° visibility for boats up to 39.4' (12M). Lights are completely sealed and watertight. Two pin w/locking collar 42" pole length 3 watts at 12VDC WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lens Color: White Visible Range (Miles): 2nm Housing: Black Voltage - Input Range (Volts): 12v LED: Yes Box Dimensions: 1"H x 3"W x 48"L WT: 0.6 lbs UPC: 022697553041

Read more less

S1W Ultra Thin Solar Light - BlueProven Hurricane Tough!Specifications: Body Material: High Impact Polycarbonate Power Supply: High Efficient Solar Panel Made in the USA Battery: Lithium-Ion 3.7v/340mah LEDs: 6 F3 LEDs Color: Blue Visual Distance: 500M Working Temperature: -20c (-4F) Life Expectancy: 5 Years Waterproof: IP68 Totally Submersible Size: 4.5" x 3.5" x .4" Warranty: 2 years Quick Guide (pdf)

Read more less

HG250 21W - 12V - 1.75 Amps - LED Fishing Light - GreenThe HG250 is our shortest underwater fishing light.  It is 12 inches long and made to be deployed right off the side of the boat.  It features 162 high out LEDs, 20’ cord, less than one amp draw and virtually unbreakable.  This model is perfect for shallow water fishing, smaller boats and even great for use on kayaks.  It’s small size makes it easy to store away and transport. The HG250 is perfect speckled trout, reds, crappie, ice fishing and shrimping. *Made in the USA Specifications: Watts: 21 Voltage - Input Range (Volts): 12 Color: Green Box Dimensions: 3"H x 5"W x 15"L WT: 1.6 lbs UPC: 814347005013

Read more less

Courtesy Light - Warm White with White RimAttractive, energy efficient lighting for interior and exterior use. Available in nine exciting colors, Hella marine round LED courtesy lamps can be installed almost anywhere on board.Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.Features: LED 12V IP67 Completely Sealed UV Resistant 5-Year Warranty Specifications: Bulb Type: LED Housing: White LED Color: Warm White Voltage - Input Range (Volts): 12/24v Dimming: No Box Dimensions: 2"H x 4"W x 8"L WT: 0.2 lbs UPC: 9416325179863

Read more less

DuraLED 50 Low Profile Interior/Exterior Lamp - Wide White Spreader BeamDuraLED 50LP offers increased light output in an ultra-low profile housing.DuraLED 50LP lamps are an extremely powerful source of white light and offer a safe, energy efficient and reliable alternative to incandescent and fluorescent lighting within an easy to install, surface mount design.These high tech, low profile lamps are available in two light patterns, Spread and Wide Spread, to suit a variety of applications including engine rooms, storage lockers, lazarettes and other heavy duty applications where reliability cannot not be compromised. Each lamp is completely sealed, UV, impact and shock resistant ensuring an ultra-long service life.Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. DuraLED 50LP lamps meet the requirements of ISO 8846 - Protection against ignition of surrounding flammable gasses by Electrical devices on Small Craft. For details please refer to the Standard.Hella Marine DuraLED 50LP lamps offer class leading energy efficiency, unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.Specifications: Lens Material: UV resistant, enhanced impact acrylic Color Temperature: 5000K (White) Cable: Pre-wired with 2.5M of twin core marine cable Operating Voltage: 9-33V DC Voltage Protection: Spike protected to +500 volts, Reverse polarity protected to -700 volts Power Consumption: < 12W Degree of Protection: IP 67 - Completely Sealed Weight: 380g (including cable) Installation: Surface mount with robust bush mount Approvals: CE, ISO 8846 (Ignition Protection) Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12/24v Housing: White LED Color: White Dimming: No Box Dimensions: 1"H x 6"W x 10"L WT: 1 lbs UPC: 9416325241911 Brochure (pdf)

Read more less

Contour Anchor Light - 12" - White Shaft, White BaseLED Navigation Anchor Light - The design says it all. Unobtrusive, durable, reliable, with striking good looks. The slimmest profile in the industry and has a locking retractable base. Select from 12” or 1m heights. U.S. Coast Guard-approved 2nm.Features: USCG approved to 2 nautical miles (2NM) Slim profile with a small footprint Available in 12"(1ft)  and 39"(1M) lengths Retractable design with lockable base Easy installation with 2-wire hookup Voltage: 10-30V DC

Read more less

Scallop Pathway Light - Spectrum RGBW - Stainless Steel Housing With a sleek, low profile design Lumitec’s Scallop Pathway Light is the world’s first ADA-compliant, PLI-compatible, dock and pathway light. The carefully engineered beam-angle minimizes glare while cleanly illuminating walkway surfaces. Scallop is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from a single color white or RGBW full-color output. The Scallop light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed in to a Kraken dock light system. Completely water sealed and IP67 compliant. Specifications: LED Color: RGBW Housing: Stainless Bulb Type: LED Dimming: No Voltage - Input Range (Volts): 12/24v Box Dimensions: 2"H x 7"W x 8"L WT: 0.6 lbs UPC: 089300016270

Read more less

Mast Light GuardKeeps lines from snagging while protecting fittings.Features: Height - 6 1/2 inches Width - 5 inches Length - 6 inches

Read more less

Zambezi Quattro Surface Mount Underwater Light - Spectrum RGBWLeveraging the SeaBlaze Quattro, Zambezi Quattro is the perfect match for larger pontoon boats, aluminum skiffs, and floating docks. Vivid Spectrum output, delivers more than 2,000 lumens and stunning color. Completely sealed with no external drivers. Self-isolating from metallic mounting surfaces to prevent galvanic corrosion. Perfect for typical transducer/accessory brackets.Specifications: Lumens (White): 2000+ Voltage: 10-30V DC 12V DC Amps: 2.1A 24V DC Amps: 1.1A Rated Watts: 25 CCT: 6500 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55  Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): No Color Match Commitment (CM): No Mounting Hole Diameter: 0.5" Length: N/A Width: N/A Depth: 1.6in (4.06cm) Diameter: 4in (10.16cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Surface Color: Full Color RGBW Material: Bronze Watts: 25w Voltage - Input Range (Volts): 10-30v Box Dimensions: 4"H x 5"W x 5"L WT: 1.55 lbs UPC: 089300014603 Brochure (pdf)

Read more less

Scallop Surface Mount Pathway Light - Spectrum RGBW/Warm White - Bronze FinishWith a sleek, low profile design Lumitec’s Scallop Pathway Light is ADA-compliant, PLI-compatible, dock and pathway light. The carefully engineered beam-angle minimizes glare while cleanly illuminating walkway surfaces. Scallop is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from warm white or RGBW full-color output. The Scallop light is PLI and TTP enabled, meaning it can be used with any standard 12V-24V DC power supply; added to a Mantis dock light kit; or designed in to a Kraken dock light system. Completely water sealed and IP67 compliant. Features: Stainless Steel or Bronze Finish ADA compliant Warm White LED or RGBW full color changing Made in USA 3-Year Warranty Specifications: Voltage 10-30v DC 4 Watts (340mA @12V or 190mA @24V) "POCO" Digital Lighting Control compatible Dimensions: 4" Diameter x 0.60" Thick What's In The Box? 1 Scallop pathway light 2 Mounting screws Instruction Sheet Specifications: Voltage - Input Range (Volts): 12/24v LED Color: RGBW Housing: Bronze Bulb Type: LED Box Dimensions: 2"H x 7"W x 8"L WT: 0.65 lbs UPC: 089300016737

Read more less

EuroLED 75 3" Round Screw Mount Down Light - Warm White LED - Stainless Steel Rim - 12VStylish, reliable and energy efficient, these lamps will provide excellent illumination to enhance interior and exterior spaces.The EuroLED 75 uses a highly efficient optical system that produces a very wide and even illumination that is specifically designed to reduce individual light source glare, which can lead to discomfort and eye strain.This precision optic, coupled with the latest LED technology delivers exceptional color rendering, reproducing colors in their natural richness. The EuroLED 75 replicates the pleasing appearance of a traditional round lamp but contains all the advantages of a high efficacy, durable solid state light - giving you the best of both worlds.EuroLED 75 is available in warm or neutral white which will beautifully enhance the materials chosen for your vessel. Screw or spring mount options, pre-wired and sized for a standard cut out make new or refit installation a breeze.Hella marine EuroLED lamps are completely sealed and manufactured using the highest grade materials that will not corrode, fade or embrittle in the harsh marine environment. Innovative, ceramic based thermally conductive materials dissipate heat generated by the LED’s, thereby extending the life of the luminaire, whilst being completely corrosion free. This means you can use the same light fittings for both the interior and exterior to create a clean and consistent lighting plan.Like all Hella marine LED lamps the EuroLED 75 is supported by a 5 year warranty for complete peace of mind.Specifications: Rim material: UV resistant plastic or 316 stainless steel options Color Temperature: 5000K (White), 2700K (Warm White) Dimming: Via PWM or Voltage Resistive dimmer Cable: Pre-wired with 150mm tinned marine cable Operating Voltage: 12V or 24V DC options Power Consumption: <3W ( <0.19A @ 12V DC / <0.1A @ 24V DC) Degree of Protection: IP6K7 & IP6K9K (Completely sealed) Installation: Screw or Spring Clip options Approvals: CE, RCM Manufactured In: New Zealand Specifications: LED: Yes Voltage - Input Range (Volts): 9-33v Dimming: Yes Housing: Stainless LED Color: Warm White Box Dimensions: 2"H x 2"W x 8"L WT: 0.21 lbs UPC: 9416325238195

Read more less

2" LED Pod Light - Spot Optics - Black Housing - Pro Series 3.0This Cree spot light pod by Black Oak LED offers 40 watts of total power. Also, this CREE LED spotlight delivers extreme IP69K durability to match such high-performance LEDs, allowing users to have confidence that their lights are going to perform when needed.Cree and Osram are the biggest names on the LED market for a reason. The Cree spot lights put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. These mount virtually anywhere, and with all the hardware needed in the box, these CREE LED spotlights are ready to go. This 40w Cree POD light is the perfect Jeep JK windshield lights, and Black Oak created a sick light kit for your off-roading adventures (sold separately).Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Spot lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on duck boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Auxiliary motorcycle lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with spot optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual Specifications: Amps - Draw: 2.8 Bulb Type: LED Bulb Watts: 40 Waterproof: Yes Wireless: No Box Dimensions: 5"H x 6"W x 6"L WT: 2.35 lbs UPC: 850044517169

Read more less

Pro Series 3.0 Single Row 10" LED Light Bar - Combo Optics - White HousingBlack Oak's Marine Series lights are built to handle the toughest conditions on and off the water. Plus, they look amazing anywhere they're mounted. That's why Black Oak has decided to design the 10'' Marine Single Row Series LED Light Bar. This slim, white, powder-coated 5-watt combo light bar throws a beam over 900 meters and gives widespread flood lighting that will help users see channel markers and traps with ease!Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Combination Flood/Spot light pattern offers a superior lighting pattern Multi-mount brackets made of 9 gauge marine grade stainless steel Activities & Uses:  Mount to the top of a center console without blocking or interfering with a radar Ideal trail or dunes light for UTV and ATV enthusiasts Perfect as a bumper or grill mount on any white truck, SUV, or Jeep Light up the water on a Jon boat, pontoon, or duck boat Technical Specifications: Total Wattage: 50W Amp. Draw: 3.3 LED Quantity: 10 Weight: 4.2 lbs. Raw Lumens: 6,600 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 12" x 2.6" In the Box: Light bar Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware is ready to install! *Sold as an Individual Specifications: Beam Pattern: Spot-Flood Combo Housing: White Length (Inches): 10" Voltage - Input Range (Volts): 12v Box Dimensions: 4"H x 8"W x 16"L WT: 4.25 lbs UPC: 850044517671

Read more less

Surface Strip Light w/Switch - Warm White/Red LEDs - 12VThe Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: White LED Color: White/Red Dimming: No Box Dimensions: 1"H x 4"W x 13"L WT: 0.29 lbs UPC: 9416325241119 Brochure (pdf)

Read more less

1M Plastic Track for SCM-AL-LED StripsShadow-Caster LED Strip Mounting Track provides mounting options for Shadow-Caster Accent Lighting strips.Features: 1M plastic snap-in with 2x mounting screws included 1M length 2x mounting screws included Compatible with SCM-AL-NEON and SCM-AL-LED Quick Guide (pdf)

Read more less

Fiji Courtesy Light - White Housing - Indirect RGBW Lights - 4-PackIntroducing Fiji, the first full-color, 2-wire courtesy light designed to be used in conjunction with a Poco module to provide unlimited color options at your fingertips. Fiji has a small footprint, no exposed fasteners and an attractive contemporary design. Unlike most full-color courtesy light options Fiji has a innovative 2-wire configuration, which will reduce wire runs and the number of connections needed, thus reducing your installation time and material costs. Completely water sealed and IP 67 rated. Fiji is PLI-enabled and Poco system compatible. Fiji does NOT include our TTP technology and therefore MUST be connected to a Poco module for color light control (Poco module sold separately).Features: Housing color: White Beam pattern: Indirect Light color: Red, green, blue and white Easy 2-wire connection IP 67 rated Specifications: Height: (inch) 1” / (cm) 2.54 Width: (inch) 1.24” / (cm) 3.14 Depth: (inch) 0.75” / (cm) 1.90 Lumens: 5-26 Voltage: 10-16vDC 12VDC: 1A 24VDC: 33mA Correlated corrected temperature (CCT): 5000 Color rendering index (CRI): 70+ *Sold as a Pack of Four Specifications: Bulb Type: LED Housing: White LED Color: RGBW Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 3"W x 3"L WT: 0.1 lbs UPC: 089300017543 Quick Guide (pdf)

Read more less

Razor Light Bar - Spot - Flush Mount - WhiteThe World’s FIRST flush-mount light bar. Razor was carefully designed to be easily integrated into most existing hardtop, arch, and pilothouse designs – typically with little or no modification to production tooling.Razor is designed to drop into a contoured pocket molded into a hardtop, radar arch, brow, or other surface. Alternatively, use Razor’s surface mount kit for a sleek, low profile installation on existing flat or slightly crowned tops. Mount forward or aft, horizontal or downward facing. In all installations Lumitec’s careful thermal analysis and self-venting design puts an end to ‘pod’ mounted lightbars, which can overheat and damage surrounding composites in hard tops. Flood and spot/flood beam patterns ensure the light goes where you need it.Advanced Thermal ManagementRazor has been designed and analyzed as a complete system – with careful consideration of the top in which it is mounted. This means that Razor delivers maximum performance while protecting hardtops and pods from dangerously high temperatures.80% Lower Profile Than Most Other Light Bars On The MarketRazor’s integrated design delivers more power with a cleaner, more streamlined look. Up to 80% more streamlined in fact. As the images to the right demonstrate Razor allows builders to eliminate light pods which must be molded and added separately, saving many hours of costly finishing labor. Razor simply drops into an as-molded recess. CAD models of mold plugs or tooling inserts may be provided upon request.Features: 10,000+ TRUE lumens output Surface mountable on top or inverted Dimmable with no additional dimmer switch required Available with two beam patterns (spot or flood) Low profile (1.5") with sleek streamline design Powder-coated die-cast aluminum construction Voltage: 10-30V DC Specifications: Beam Pattern: Spot Housing: White Length (Inches): 18" Voltage - Input Range (Volts): 12/24v Box Dimensions: 4"H x 5"W x 25"L WT: 3.55 lbs UPC: 089300015877 Brochure (pdf)

Read more less

LightArmor Deck Mount Navigation Light - Black Composite - Port (red) - 2NMINTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.*LED Light Engine Cool to the touch Long lasting - 50,000+ hours Color indicated cores for ease of installation Be Safe, Be Seen Sharper cut-off angles and vibrant starboard and port colors for better visibility 2 NM U.S.C.G. Certified Corrosion Resistant Water-Resistant (IP Rating 67) Features tell-tale indicators for ease of use Smaller footprint with refined styling WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Housing: Black Lens Color: Red Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12v LED: Yes Box Dimensions: 3"H x 5"W x 6"L WT: 0.2 lbs UPC: 022697012944

Read more less