13" Fixed Height Economy PedestalFeatures: 7″ x 7″ Square Base And Seat Mount Rugged, All Steel Construction E-Coat Finish To Resist Corrosion And All Weather Conditions For Use With Standard Boat Seats Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pry-Out Deck PlatesBeckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfaces for different installation requirements. The original was used to access the handle for Beckson's permanently mounted pump. The Beckson Diamond Pattern deck plate extends across the center, eliminating a ring around the edge that traps dirt and debris. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present. O.D.: 8-1/2" Hole Cut: 6-1/2" Passage: 6-3/16" Center: Dimple

Read more less

Faux Center Nut - Stainless Steel - 1/2" & 5/8" M12 Base Included for Cast Steering WheelsFeatures: A lighter-weight nut with the same durability as our standard stainless steel center nuts Unique design allows for Universal fit

Read more less

Strap HingeLength:6"Width:1-1/8"Fastener:#8 FHMaterial: 304 Stainless Steel Specifications: Color: Stainless Material: Stainless Steel Box Dimensions: 1"H x 1"W x 3"L WT: 0.1 lbs UPC: 725060343019

Read more less

Dish/Cup/Utensil Holder Holds cups, plates, and flatware 16-1/4"L x 9-7/8"H x 7-1/8"D

Read more less

Folletto 14.2" Wheel - Black Polished Polyurethane - 3/4" Tapered Shaft - Black Center CapThe Folletto Wheel is a black polished polyurethane steering wheel. Best suited for ski boats, wakeboard boats, runabouts, or pontoons that run in freshwater applications.Features: The wheel is made of black polished polyurethane Includes black center cap Specifications: Rim diameter: (inch) 14.2" Hole diameter: (inch) 3/4" tapered shaft  Tapered hub: (inch) 3/4" & 1.75" length 3 spokes  *Packaged in a retail box Specifications: Diameter (Inches): 14.2 Box Dimensions: 4"H x 15"W x 15"L WT: 3.5 lbs UPC: 835719003192 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Folletto 14.2" Wheel - Black Polyurethane - 3/4" Tapered Shaft - Black Center CapThis Folletto Wheel is a black polyurethane steering wheel. Best suited for ski boats, wakeboard boats, runabouts, or pontoons that run in freshwater applications.Features: The wheel is made of black polyurethane (not polished) Includes black center cap Specifications: Rim diameter: (inch) 14.2" Hole diameter: (inch) 3/4" tapered shaft  Tapered hub: (inch) 3/4" & 1.75" length 3 spokes  *Packaged in a retail box Specifications: Diameter (Inches): 14.2 Box Dimensions: 4"H x 15"W x 15"L WT: 4 lbs UPC: 835719003161 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

PU30 14" Wheel - Chrome Cap & Spoke Inserts - Black Spokes - 3/4" Tapered ShaftThis particular model of the PU30 Wheel is a black polyurethane steering wheel with black spokes. Best suited for ski boats, wakeboard boats, runabouts, or pontoons that run in freshwater applications. Features: Chrome cap & spoke inserts  The wheel is made of polyurethane Black aluminum spokes Specifications: Rim diameter: (inch) 14" Hole diameter: (inch) 3/4" tapered hub 3 spokes Specifications: Diameter (Inches): 14 Box Dimensions: 4"H x 15"W x 15"L WT: 3.6 lbs UPC: 835719003420 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Primus Model 740 - 13.5" Wheel With Knob & Finger Grip - 3/4" Tapered Shaft With Faux Nut - 1/2" & 3/4" AdaptersThe Primus Wheel is a 3 spoke stainless steel steering wheel that can be a great addition to any boat. This specific steering wheel comes with a Santoprene finger/rim grip, spoke inserts, and a fitted centered faux nut.Features: The wheel is made of polished 316 cast stainless steel, which is proven to be durable and long-lasting Santoprene finger grip, Santoprene rim grip, and Santoprene spoke insertsIncludes center faux nut  1/2" & 3/4" adapters for different helm sizes  Lifetime warranty Specifications: Rim diameter: (inch) 13 1/2" Hole diameter: (inch) 3/4" tapered shaft  3 spokes  *Packaged in a retail box Specifications: Diameter (Inches): 13.5 Box Dimensions: 6"H x 14"W x 14"L WT: 5 lbs UPC: 835719003123 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Torcello Elite 14" Wheel - Black Leather & Cap - White Stitching - Polished SS Spokes - 3/4" Tapered ShaftFew things on a boat have the power to convey a sense of luxury as much as the steering wheel. The Torcello Elite does just that. Wrapped in hand-stitched marine-grade synthetic leather, it delivers a hand feel that matches that of a premium automobile.Features: Marine-grade synthetic leather The wheel is made of polyurethane Polished stainless steel spokes White stitching  Specifications: Rim diameter: (inch) 14" Hole diameter: (inch) 3/4" tapered shaft 3 spokes Specifications: Diameter (Inches): 14 Box Dimensions: 4"H x 15"W x 15"L WT: 3.5 lbs UPC: 835719003413 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Barrel Bolt - Chrome Finish - 3" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Door Stop & Catch - Chrome - 2" The Sea-Dog® Door Stop and Catch holds the door securely against the rubber stop, effectively reducing rattling common with most door hooks. The spring-loaded latch allows for quick and easy release. Constructed of sand cast brass with a plain polished or chrome plated finish. These door stops are both decorative and functional. Installs with five #6 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel 90° Concave Base Deck HingeDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Ongaro Wheel - 15.5" with Knob for 3/4" Teleflex Tapered ShaftOngaro family of the steering wheels to replace the OEM steering wheel of luxury boats.  This top-grade product is expertly made in compliance with the highest industry standards, offering well-balanced design, ergonomic superiority, and the highest level of craftsmanship Technical Specifications: Material - 316 Stainless Steel Diameter - 15.5" Shaft Size - .75" Tapered shaft Knob - Included In the Box: Steering wheel with knob Center cap Instruction manual *Sold as an Individual  Specifications: Diameter (Inches): 15.5 Box Dimensions: 4"H x 16"W x 16"L WT: 17.4 lbs UPC: 768170500033

Read more less

Textured Quarter Turn Deck Plate - White - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Chrome Plated Zinc Hasp - 3"Features: Chrome Plated Zinc Alloy Length Closed: 3" Width: 1" Padlock Clearance: 1/4"

Read more less

Stainless Steel Clam Shell Vent - Mini Mini Clam Shell Ventilators provide splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Corrosion resistant 304 stamped stainless steel construction. Can be used for cabin ventilation with the addition of a dorade box. Clam Shell Vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Easy to install with pre-drilled holes for five #6 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flat Deck Hinge with Pin & Lanyard - 7/8"-1-1/4"Features: Offered in concave and flat mounts  Secure fit with removable pin and lanyard or turn and lock D-ring This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Ongaro Wheel - 15.5" for 3/4" Teleflex Tapered Shaft Ongaro family of the steering wheels to replace the OEM steering wheel of luxury boats.  This top-grade product is expertly made in compliance with the highest industry standards, offering well-balanced design, ergonomic superiority, and the highest level of craftsmanship Technical Specifications: Material - 316 Stainless Steel Diameter - 15.5" Shaft Size - .75" Tapered shaft Knob - Not included In the Box: Steering wheel Center cap Instruction manual *Sold as an Individual  Specifications: Diameter (Inches): 15.5 Box Dimensions: 2"H x 15"W x 16"L WT: 12 lbs UPC: 768170500026

Read more less

Flexible T-Handle Latch KeeperFeatures: Material: Nylon Finish: Natrual Color/Appearance: Black Mounting Style: Front Mount

Read more less

Stainless Top Insert - 7/8"Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

7" Fixed Height Economy PedestalFeatures: 7″ x 7″ Square Base And Seat Mount Rugged, All Steel Construction E-Coat Finish To Resist Corrosion And All Weather Conditions For Use With Standard Boat Seats Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Rail Base Fitting Rectangular Base 30° 316 Stainless Steel 1-7/8" x 3-3/16" - 1" ODThese Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049”WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Rail Base Fitting 2-3/4" Round Base 30° 316 Stainless Steel - 1" ODThese Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049”WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Folding Step - Formed 304 Stainless SteelThe ultimate step at a very competitive price! This Folding Step can be locked in a rattle-free, upright position when not in use. The unique design features a sawtooth, edged step to provide secure footing when working on the mast or other areas where an additional step is needed but available space is limited. Usable tread is 1” W x 4-1/4" L. Overall length is 5-5/8”. Constructed of stamped 304 stainless with a tumbled and electro-polished finish. Installs with four #10 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Deck Step 3-1/4" x 8-3/8"Injection Molded Rubber/Stamped 304 Stainless SteelThese Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Nylon Small Deck Hinge - WhiteDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Nylon Top Cap - White - 3/4"Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Nylon Top Cap - Black - 3/4"Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Nylon Top Cap - White - 7/8"Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Nylon Top Insert - White - 3/4"Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Smooth Quarter Turn Deck Plate - White - 6" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Barrel Bolt - Chrome Finish - 2" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quarter-Turn Smooth Deck Plate with Internal Collar - Black - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quarter-Turn Smooth Deck Plate with Internal Collar - Black - 4" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Textured Quarter Turn Deck Plate - White - 6" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Perko Vented Flip Top Cap f/Fills with 1-1/2" Hose Black Polymer Easily Mounts Directly on Gunnel with Removing Fill Body Includes Metallic Inserts for Gas, Diesel or Water Fills Integral Tank Vent with Flame Arrestor No Deck Plate Key or Ground Wire Required Flip Top Cap Technical Information Requires 5-1/4" Diameter Mounting Surface Screw Size: #8

Read more less

ZAMAK Chrome Plated Zinc Cleats - Pair - 4-1/2"For decades, Attwood has set marine industry standards for great looking, durable, freshwater hardware. Our Perma-Plate® process provides the best chrome-plating in the industry with eight individual layers of plating. Each layer adds to the product’s durability and corrosion-resistance. This Perma-Plate® process produces the finest, most corrosion-resistant ZAMAK hardware available exclusively from Attwood.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Small Flexible T-Handle Draw Latch - Latch Only/No Keeper IncludedFeatures: Flexible one piece molded latch UV resistant Absorbs and reduces vibration Material: Nylon Material: Rubber Finish: Natural Color/Appearance: Black Mounting Style: Front Mount

Read more less

Evo Pro 316 Cast Stainless Steel Steering Wheel - 13.5" Diameter Boat owners shouldn't have to sacrifice comfort for elegant styling in a steering wheel. With a gleaming stainless steel center spoke and ergonomic polyurethane grip, Schmitt Marine's Model 724 Evo Pro wheel provides the best of both worlds.Combining solid value with a luxurious appearance, the Evo Pro offers features owners expect in more expensive wheels. Cast 316 stainless steel construction ensures strength and durability. Molded to simulate fine hand-stitched leather, the poly grip contributes a plush look as well as optimal ease and handling.Its contrasting combination of materials gives the Evo Pro a smart, sporty look, with a black hand grip and center cap setting off the high polish of the stainless steel.Easy to mount, the Evo Pro has a 3/4" tapered shaft and has a diameter of 13-1/2". Schmitt Marine thoroughly tests each of its stainless steel wheels and offers a lifetime warranty.

Read more less

Flex Vinyl Rub Rail Kit - Black with Black Insert - 50' - 1-7/8" X 1-3/8"Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guideFeatures: 1-7/8" X 1-3/8" Black with Black Insert This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

5/8" Center Nut for 7XX Series Steering Wheels for Teleflex HelmsFeatures: Stainless Steel Center Nut Fits Teleflex Helms

Read more less

12mm Center Nut for 7XX Series Steering Wheels for Uflex HelmsFeatures: Stainless Steel Construction Fits Uflex Helms

Read more less