Oblong Drawer Pull 4-1/16" Length Recess Mount, 1/2" Deep 2-Pack

Read more less

SuproFlex Rub Rail Kit - Black with Flex Chrome Insert - 2"H x 29/32"W x 60'LThe SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Pairs with V12-0307CP (included in kit) Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Aluminum Ribbed Table Pedestal - 2-3/8" O.D. - 26" LengthAll columns are tapered on the bottom to submit a secure fit into the base while allowing for easy removal and storage.Features and Benefits Dual Taper Ribbed Satin Anodized Finish This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Keylocking Flush/Knob Latch - Black PlasticFeatures: Push button opening Single hole installation Optional ejector spring helps prevent rattles Material: Plastic Color/Appearance: Black Access Restriction: Key Locking Grip Range: 22.300-23.100mm (0.88-0.91") Installation: Threaded body and nut Panel Thickness: 0.000-10.300mm (0.00-0.41in) Style: Pull Tab In Line With Latching Pawl

Read more less

Rail Base Fitting Rectangular Base 90° 316 Stainless Steel - 1-7/8" x 3-3/16" - 1" ODReplacement rail base fitting.  Features: Constructed of corrosion resistant investment cast 316 stainless steel.  Stainless tubing with a wall thickness of 0.049” Installs with four FH fasteners (not included).  ∗Sold as an individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Deck Fill for Carbon Canister System - Angled Body & Scalloped Black Plastic CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Compatible with Ethanol blended fuels Designed and tested to prevent water from entering the fuel system Deck Fill for Carbon Canister System, angled, black composite EPA / CARB Certified Dual 1 psi overpressure relief safety valves built into the deck fill caps Automatic nozzle shutoff 4-18 gpm Quick Guide (pdf)

Read more less

Quarter-Turn Textured Deck Plate with Internal Collar - White - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Round Drawer Pull 1-3/8" Round Recess Mount, 3/8" Deep 2-Pack

Read more less

Switch Cover/Switch PlateHeight:5-1/16"Width:3-5/8"

Read more less

Aluminum Ribbed Table Pedestal - 2-3/8" O.D. - 30-3/4" LengthAll columns are tapered on the bottom to submit a secure fit into the base while allowing for easy removal and storage.Features and Benefits Dual Taper Ribbed Satin Anodized Finish This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Rail Base Fitting 2-3/4" Round Base 90° 316 Stainless Steel - 1" ODThese Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049” WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Bow Eye - 3/8" x 4-1/4"These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp ring style stern eyes. Can be used in conjunction with Lift Eyes (048330 or 048350) for a more robust lifting assembly. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

T-Handle Latch - Chrome Plated Zamac/White Nylon - Locking - Freshwater OnlyFeatures: Nylon Body and CP Zamac handle Locking T-Handle latch Short Offset Cam Bar Nylon body is white Neoprene O-ring & Key fastener included Surface Depth - 1/8"-3/4" Diameter - 3" Cut-Out - 2-1/2" Chrome Plated Zamac parts should be installed on fresh water boats only

Read more less

Ring Buoy BracketMaterial: 304 Stainless SteelFastener: 1/4" (2)Dimensions: L: 6-3/8"Hook Size: 3-3/4"

Read more less

Torcello Elite 14" Wheel - Beige Leather & Cap - White Stitching - Black SS Spokes - 3/4" Tapered Shaft Few things on a boat have the power to convey a sense of luxury as much as the steering wheel. The Torcello Elite does just that. Wrapped in hand-stitched marine-grade synthetic leather, it delivers a hand feel that matches that of a premium automobile.Features: Marine-grade synthetic leather The wheel is made of polyurethane Black stainless steel spokes White stitching  Specifications: Rim diameter: (inch) 14" Hole diameter: (inch) 3/4" tapered shaft 3 spokes Specifications: Diameter (Inches): 14 Box Dimensions: 4"H x 15"W x 15"L WT: 4.8 lbs UPC: 835719003406 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

MiniVent 1000 3" - WhiteThe MiniVent 1000 is the smallest and most economical solar vent in the Marinco line. At just 7" in diameter and approximately 1-3/4" high, the MiniVent 1000 is compact yet effective. This solar-powered model is an exhaust vent only. It will keep the boat cabin cool when you need it most, during the hot sunlight hours. Under solar power, the Mini Vent 1000 will move 700 cubic feet of air an hour. At night, even a light breeze will continue to ventilate the boat passively. Built-in shut-off damper prevents water intrusion in rough seas. Fits a 3-3/4" diameter installation hole. The vent can be retrofitted to an existing hole of up to 6" in diameter. Available in white ABS plastic or stainless steel. All MiniVent 1000 models come complete with a white plastic interior trim ring, mounting hardware, and an easy-to-understand installation manual.Features: Solar-powered exhaust ventilation during daylight and passive exhaust at night No batteries or wiring required Whisper-quiet fan operation Durable white ABS construction Shut off damper to prevent water intrusion in rough seas Dimensions: 7" diameter X 1-3/4" high

Read more less

Rub Rail Insert - Flexible Chrome - 80'Accent your Rub Rail with a secure, seamless Vinyl Insert – available in a variety of colors, shapes, and sizes for a precision fit. Designed to pair with many of our Flexible or Rigid Vinyl Rub Rail profiles, our Vinyl Inserts are a secure solution to hide fasteners while also providing a cushion to protect against impact damage.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Center Handrail StanchionTube Outer Diameter:1"Height:1-3/4"Fastener:#10(2)Material: 316 Stainless Steel

Read more less

Utility Snap Hook - 4"This Attwood Utility Snap Hook is a versatile and dependable resource for connecting items or establishing a tie-down point. This sturdy zinc-plated steel hook has a spring-loaded closure that makes it easy to attach this hook to an item and remove the hook just as quickly and easily. This light-duty hook is 4 inches long, has a ¼-inch ring diameter, and is rated for a 500-pound safe load. Features: Versatile and dependable resource for connecting items or establishing a tie-down point Sturdy zinc-plated steel hook Spring-loaded closure attaches hook to an item quickly and easily Light-duty hook Rated for a 500-pound safe load 4 inches long

Read more less

Fender Cleat - 3-1/2"The perfect compliment to the Attwood Neat Cleat, the Fender Cleat allows you to easily secure fenders to your boat with a simple lift. This retractable cleat is made of durable, enhanced cast 316 stainless steel it's simple design assures long-life and dependable operation.  Total Length: 3-1/2" Total Width: 1-3/16" Above deck-lowered/closed): 9/16"  Above deck- raised/open: 1-3/8" Maximum Line Opening (adjusting heights): 3/4" Install Depth: 1-7/8" Mounting Hole Distance: 1-11/16" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Table Base w/Locking PinStainless Steel Table Support with Locking Pull PinTube Size: 1-5/8'' Flange Dia.: 6-1/4"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Spring Loaded Cleat Can be installed horizontally or vertically Holds fenders, when open and is only 5/8" high when closed Requires (3) 3/16" fasteners Hole:3/4"Diameter: 1-7/8"Fits Rope: Up to 1/2" Height:Open 1-1/4", Closed 5/8"Material: 316 Stainless Steel Specifications: Finish: Polished Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 6"L WT: 0.49 lbs UPC: 725060697013

Read more less

Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide. Features: Black w/No Insert 1-7/8"H x 3/4"W x 30'L This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Stainless Heavy Duty Hasp - 2-11/16"This heavy-duty hasp is designed with a slotted plate that fits over a fixed post. Prevents removal when used in conjunction with a padlock. For added security, all mounting screws are concealed when the hasp is closed. Ideal for securing lockers, cupboards, chests, or hatch doors. Constructed of corrosion-resistant stamped 304 stainless steel. Installs with seven #6 FH fasteners (not included). Specifications: Length (inch): 2-11/16" Width (inch): 1-3/16" Depth (inch): 7/8" Hasp Eyelet Width (inch): 1/2" Hasp Eyelet to Hasp Pin (inch): 1-7/8" Fastener: #6 FH Weight: .07 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SuproFlex Small Stainless Steel End CapComplete your SuproFlex V11-9960 Rub Rail installation with this stainless steel Type-316 mirror polish finished end cap.Features: Caps Rub Rail at the stern of the boat for a finished look Ensures inserts stay intact Stainless-steel marine-grade Type-316L 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Stainless Steel Mounting Bracket f/Side Mount Table PedestalPolished stainless steel, side mount table pedestal removes when not in use for clear decks. Locking feature offers added mounting strength.Features: Polished stainless steel pedestal & table support Anodized aluminum bracket Locking pull pin offers added mounting strength Removable 125° bent leg Dimensions: 4-7/8"W x 4"H x 1/2"D Screw: #10 flat head / 1/4" hole. Benefits: Eliminates the need for mounting holes in boat deck and/or cockpit Easy to remove when not in use, for clear passage and storage Quick set-up and removal in tight spaces Increased leg & foot room This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Two-Tier Spice Rack Holds up to 6 standard spice bottles on each self Shelves are 3" deep 13-1/8"W x 10-1/8"H x 4-1/4"D

Read more less

Pry-Out Deck PlatesBeckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfaces for different installation requirements. The original was used to access the handle for Beckson's permanently mounted pump. The Beckson Diamond Pattern deck plate extends across the center, eliminating a ring around the edge that traps dirt and debris. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present. O.D.: 8-1/2" Hole Cut: 6-1/2" Passage: 6-3/16" Center: Dimple

Read more less

Faux Center Nut - Stainless Steel - 1/2" & 5/8" M12 Base Included for Cast Steering WheelsFeatures: A lighter-weight nut with the same durability as our standard stainless steel center nuts Unique design allows for Universal fit

Read more less

Strap HingeLength:6"Width:1-1/8"Fastener:#8 FHMaterial: 304 Stainless Steel Specifications: Color: Stainless Material: Stainless Steel Box Dimensions: 1"H x 1"W x 3"L WT: 0.12 lbs UPC: 725060343019

Read more less

Folletto 14.2" Wheel - Black Polished Polyurethane - 3/4" Tapered Shaft with Black Center CapThe Folletto Wheel is a black polished polyurethane steering wheel. Best suited for ski boats, wakeboard boats, runabouts, or pontoons that run in freshwater applications.Features: The wheel is made of black polished polyurethane Includes black center cap Specifications: Rim diameter: (inch) 14.2" Hole diameter: (inch) 3/4" tapered shaft  Tapered hub: (inch) 3/4" & 1.75" length 3 spokes  *Packaged in a retail box Specifications: Diameter (Inches): 14.2 Box Dimensions: 4"H x 15"W x 15"L WT: 3.5 lbs UPC: 835719003192 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Folletto 14.2" Wheel - Black Polyurethane - 3/4" Tapered Shaft - Black Center CapThis Folletto Wheel is a black polyurethane steering wheel. Best suited for ski boats, wakeboard boats, runabouts, or pontoons that run in freshwater applications.Features: The wheel is made of black polyurethane (not polished) Includes black center cap Specifications: Rim diameter: (inch) 14.2" Hole diameter: (inch) 3/4" tapered shaft  Tapered hub: (inch) 3/4" & 1.75" length 3 spokes  *Packaged in a retail box Specifications: Diameter (Inches): 14.2 Box Dimensions: 4"H x 15"W x 15"L WT: 4 lbs UPC: 835719003161 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

PU30 14" Wheel - Chrome Cap & Spoke Inserts - Black Spokes - 3/4" Tapered ShaftThis particular model of the PU30 Wheel is a black polyurethane steering wheel with black spokes. Best suited for ski boats, wakeboard boats, runabouts, or pontoons that run in freshwater applications. Features: Chrome cap & spoke inserts  The wheel is made of polyurethane Black aluminum spokes Specifications: Rim diameter: (inch) 14" Hole diameter: (inch) 3/4" tapered hub 3 spokes Specifications: Diameter (Inches): 14 Box Dimensions: 4"H x 15"W x 15"L WT: 3.6 lbs UPC: 835719003420 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Primus Model 740 - 13.5" Wheel With Knob & Finger Grip - 3/4" Tapered Shaft With Faux Nut - 1/2" & 3/4" AdaptersThe Primus Wheel is a 3 spoke stainless steel steering wheel that can be a great addition to any boat. This specific steering wheel comes with a Santoprene finger/rim grip, spoke inserts, and a fitted centered faux nut.Features: The wheel is made of polished 316 cast stainless steel, which is proven to be durable and long-lasting Santoprene finger grip, Santoprene rim grip, and Santoprene spoke insertsIncludes center faux nut  1/2" & 3/4" adapters for different helm sizes  Lifetime warranty Specifications: Rim diameter: (inch) 13 1/2" Hole diameter: (inch) 3/4" tapered shaft  3 spokes  *Packaged in a retail box Specifications: Diameter (Inches): 13.5 Box Dimensions: 6"H x 14"W x 14"L WT: 5 lbs UPC: 835719003123 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Torcello Elite 14" Wheel - Black Leather & Cap - White Stitching - Polished SS Spokes - 3/4" Tapered ShaftFew things on a boat have the power to convey a sense of luxury as much as the steering wheel. The Torcello Elite does just that. Wrapped in hand-stitched marine-grade synthetic leather, it delivers a hand feel that matches that of a premium automobile.Features: Marine-grade synthetic leather The wheel is made of polyurethane Polished stainless steel spokes White stitching  Specifications: Rim diameter: (inch) 14" Hole diameter: (inch) 3/4" tapered shaft 3 spokes Specifications: Diameter (Inches): 14 Box Dimensions: 4"H x 15"W x 15"L WT: 3.5 lbs UPC: 835719003413 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Barrel Bolt - Chrome Finish - 3" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel 90° Concave Base Deck HingeDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Ongaro Wheel - 15.5" with Knob for 3/4" Teleflex Tapered ShaftOngaro family of the steering wheels to replace the OEM steering wheel of luxury boats.  This top-grade product is expertly made in compliance with the highest industry standards, offering well-balanced design, ergonomic superiority, and the highest level of craftsmanship Technical Specifications: Material - 316 Stainless Steel Diameter - 15.5" Shaft Size - .75" Tapered shaft Knob - Included In the Box: Steering wheel with knob Center cap Instruction manual *Sold as an Individual  Specifications: Diameter (Inches): 15.5 Box Dimensions: 4"H x 16"W x 16"L WT: 17.4 lbs UPC: 768170500033

Read more less

Textured Quarter Turn Deck Plate - White - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Clam Shell Vent - Mini Mini Clam Shell Ventilators provide splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Corrosion resistant 304 stamped stainless steel construction. Can be used for cabin ventilation with the addition of a dorade box. Clam Shell Vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Easy to install with pre-drilled holes for five #6 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Ongaro Wheel - 15.5" for 3/4" Teleflex Tapered Shaft Ongaro family of the steering wheels to replace the OEM steering wheel of luxury boats.  This top-grade product is expertly made in compliance with the highest industry standards, offering well-balanced design, ergonomic superiority, and the highest level of craftsmanship Technical Specifications: Material - 316 Stainless Steel Diameter - 15.5" Shaft Size - .75" Tapered shaft Knob - Not included In the Box: Steering wheel Center cap Instruction manual *Sold as an Individual  Specifications: Diameter (Inches): 15.5 Box Dimensions: 2"H x 15"W x 16"L WT: 12 lbs UPC: 768170500026

Read more less

Flexible T-Handle Latch KeeperFeatures: Material: Nylon Finish: Natrual Color/Appearance: Black Mounting Style: Front Mount

Read more less

Stainless Top Insert - 7/8"Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

7" Fixed Height Economy PedestalFeatures: 7″ x 7″ Square Base And Seat Mount Rugged, All Steel Construction E-Coat Finish To Resist Corrosion And All Weather Conditions For Use With Standard Boat Seats Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Rail Base Fitting Rectangular Base 30° 316 Stainless Steel 1-7/8" x 3-3/16" - 1" ODThese Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049”WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Rail Base Fitting 2-3/4" Round Base 30° 316 Stainless Steel - 1" ODThese Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049”WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Deck Step 3-1/4" x 8-3/8"Injection Molded Rubber/Stamped 304 Stainless SteelThese Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Nylon Small Deck Hinge - WhiteDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less