DeviceNet (M) to ST-Ng (F) AdapterThis handy accessory will make networking Raymarine and 3rd party NMEA2000 devices much simpler. Using the adapters, you can instantly convert devices or spur cables from one connector system to the other.

Read more less

SeaTalkng to DeviceNet Female Adapter Cable - 1MAdapts SeaTalkng to NMEA2000 network.  Specifications: Type: Adapters Box Dimensions: 1"H x 8"W x 12"L WT: 0.2 lbs UPC: 723193783801

Read more less

RayNet (female) to RJ45 Male Cable - 3mRayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays.The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector.Features: 3m (9.84 ft.) RayNet to SeaTalkhs (RJ45) cable

Read more less

Spur CableRaymarine 5 meter Spur Cable for SeaTalkng

Read more less

Pole Mount f/GS25, ZG100 & POINT-1 GPS AntennasPole mount for GS25, ZG100, POINT-1 GPS and heading sensor Specifications: Type: Pole Mount Box Dimensions: 4"H x 4"W x 10"L WT: 0.25 lbs UPC: 9420024124796

Read more less

Tilt Mount f/STRIKER™ Plus 9svSecure your compatible marine device with this mount, featuring tilt capabilities for optimum viewing.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 10"L WT: 0.5 lbs UPC: 753759186937

Read more less

170 2.25" Ball Mounting System for 10-12" ScreensComponents:  171 2.25" Ball System Arm 175 2.25" Ball System Top Plate for 10-12" Screens 176 2.25" Ball System Base 171 2.25" Ball System ArmFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 2.25″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends For 10-12″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) 175 2.25" Ball System Top Plate for 10-12" ScreensFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 2.25″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends For 10-12″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) 176 2.25" Ball System BaseFeatures: Engineering-grade nylon and stainless steel construction Compatible with all 2.25″ Scotty ball system accessories Equipped with the classic Scotty 241 hole pattern, allowing it to be paired with these options: 449 Portable Clamp Mount 320 Adaptable Rail Mount 242 Rail Mount Adapter 340 Track Adapter 441 Backing Plate 341 Glue-On Mount Pad28 Gimbal Mount Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 7"W x 8"L WT: 2.4 lbs

Read more less

165 1.5″ Ball System Top PlateFeatures: The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners(sold separately) Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 5"W x 12"L WT: 0.5 lbs UPC: 062017001654

Read more less

Eagle 7" SuncoverThis 7-inch cover is designed for Lowrance Eagle displays.Features:Protects the marine environment Specifications: Type: Covers Box Dimensions: 2"H x 7"W x 12"L WT: 0.49 lbs UPC: 9420064135165

Read more less

Yamaha® Engine Bus to J1939 Adapter Cable - 3'Connect your J1939 equipped GPSMAP® 7400/7600/8400/8600 series chartplotter directly to your Yamaha engine bus multi-hub to bring Yamaha’s fully-integrated boat control system and custom touchscreen user interface to your Garmin installation.Pigtail Bus Wire Reference:Yamaha Part Number - Description 6Y8-82521-01-00 - 1 ft. Pigtail Bus Wire 6Y8-82521-11-00 - 2 ft. Pigtail Bus Wire 6Y8-82521-21-00 - 3 ft. Pigtail Bus Wire 6Y8-82521-31-00 - 6 ft. Pigtail Bus Wire 6Y8-82521-41-00 - 9 ft. Pigtail Bus Wire 6Y8-82521-51-00 - 12 ft. Pigtail Bus Wire WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

OP-55 Landscape Remote Control for NEON™ OS MFDsFeatures: Control up to six compatible multifunction displays running NEON™ OS High-quality aluminum control dial with built-in cursor functions Customizable key for more flexibility Low-profile dash mount, or total flush-mount with optional bracket Integrated high-decibel speaker for critical alarms Landscape orientation (portrait version also available) Narrow design perfect for helm chair arm mounting Compatible with Simrad® NSO® 4, NSS® 4 and NSX® / B & G® ZEUS® SRX, ZEUS® SR and Zeus® S Manage Multiple DisplaysNetworked with a single NMEA 2000® connection for both power and control, one OP55 Remote Controller can operate up to six networked multifunction displays. Integrated LED indicators clearly show which display is selected, while a dedicated button cycles quickly through the available displays.Controls Optimized for NEON™ OS DisplaysThe OP55 Remote Controller features a keypad specifically designed to operate NEON™ OS multifunction displays efficiently and reliably in all conditions. The controller’s high-quality aluminum dial features a knurled edge for precise control and built-in cursor functions for easy on-screen navigation. An OP55 can be used to add classic controls to a touchscreen system or to give one station total control over multiple Simrad® displays.Easy Mounting in Horizontal or 'Landscape' OrientationThe landscape OP55 is ideal for installation beneath the NEON™ OS touchscreen, allowing easy control while keeping hands and arms from obscuring the display. Dash mounting provides a slim eight-millimeter profile, while an optional bracket allows total flush-mount installation.Custom Key ButtonA fully programmable button that gives you fast access to the functions and apps you use most. Set different actions for single, double, or long presses so you can launch key features instantly with one simple control.In the Box: OP-55 Controller N2K T-Joiner OP50/ZC2 Suncover OP50/ZC2 Dash Mounting Kit

Read more less

N2K Starter KitNMEA 2000 Network Starter Kit Includes: Network power cable 4.5M (15') N2K cable 3 x T-connectors 2 x network terminators Specifications: Type: Misc Box Dimensions: 3"H x 6"W x 9"L WT: 1.2 lbs UPC: 9420024118382

Read more less

Halo20 Ethernet AdapterCable, RJ45 To 5 Pin,1.5m Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 8"L WT: 0.2 lbs UPC: 9420024173947

Read more less

Edge Bezels NSS9 Evo3, Evo3S, Zeus3 9 & Zeus3S 9 - PairFeatures: Edge Bezels for NSS9 Evo3, Evo3S, Zeus3 9 & Zeus3S 9 Comes as a Pair Specifications: Type: Parts Box Dimensions: 0"H x 1"W x 11"L WT: 0.03 lbs

Read more less

Power cable for all HDS units: HDS-10, HDS-10m, HDS-5, HDS-5m, HDS-5x, HDS-7, HDS-7m, HDS-8, HDS-8m, Elite-7 Hdi Series Specifications: Type: Power Cords Box Dimensions: 3"H x 5"W x 10"L WT: 0.35 lbs UPC: 042194533537

Read more less

Wind Speed Cups for All ModelsWind speed cup spare for all models wind sensors. Includes mounting nut.

Read more less

GPS Antenna GS25The Simrad GS25 GPS antenna is the ideal GPS for any navigator that requires extremely accurate and rapid vessel position and speed updates. Unlike other position-only antennas, the GS25 provides magnetic heading for accurate boat direction at any speed and for radar/chart overlay. The GS25 easily connects to any Simrad NS Series multifunction display or any NMEA 2000® network. It is fully waterproof and can be pole or surface mounted on any vessel. *Please note this product is not suitable for use with MARPA or autopilot systems which require a rate compass such as the RC42. Features: High-Speed Position Update Rapid Signal Acquisition Consistent Position Accuracy Integrated Magnetic Heading GPS, WAAS, EGNOS and More Compact Design Fully Waterproof NMEA 2000® Connectivity Simrad Yachting Construction What's in the Box? N2KEXT-15RD 15ft Network Extension Cable Pole Mount GS25/ZG100/POINT-1 N2K-T-RD Network T-Connector Specifications: Type: Antennas Box Dimensions: 4"H x 8"W x 11"L WT: 1.55 lbs UPC: 9420064118694

Read more less

OP-55 Portrait Remote Control for NEON™ OS MFDsFeatures: Control up to six compatible multifunction displays running NEON™ OS High-quality aluminum control dial with built-in cursor functions Customizable key for more flexibility Low-profile dash mount, or total flush-mount with optional bracket Integrated high-decibel speaker for critical alarms Portrait orientation (landscape version also available) Narrow design perfect for helm chair arm mounting Compatible with Simrad® NSO® 4, NSS® 4 and NSX® / B & G® ZEUS® SRX, ZEUS® SR and Zeus® S Manage Multiple DisplaysNetworked with a single NMEA 2000® connection for both power and control, one OP55 Remote Controller can operate up to six networked multifunction displays. Integrated LED indicators clearly show which display is selected, while a dedicated button cycles quickly through the available displays.Controls Optimized for NEON™ OS DisplaysThe OP55 Remote Controller features a keypad specifically designed to operate NEON™ OS multifunction displays efficiently and reliably in all conditions. The controller’s high-quality aluminum dial features a knurled edge for precise control and built-in cursor functions for easy on-screen navigation. An OP55 can be used to add classic controls to a touchscreen system or to give one station total control over multiple Simrad® displays.Easy Mounting in Horizontal or 'Landscape' OrientationThe portrait OP55 is perfectly suited to mounting in the arm of a helm chair, with its narrow design and side-entry cable. Dash mounting provides a slim eight-millimeter profile, while an optional bracket allows total flush-mount installation.Custom Key ButtonA fully programmable button that gives you fast access to the functions and apps you use most. Set different actions for single, double, or long presses so you can launch key features instantly with one simple control.In the Box: OP-55 Controller N2K T-Joiner OP50/ZC2 Suncover OP50/ZC2 Dash Mounting Kit

Read more less

Suncover for Elite-7 Ti SeriesSuncover for the Lowrance Elite-7 Ti Series Chartplotter/Fishfinders. Specifications: Type: Covers Box Dimensions: 1"H x 6"W x 9"L WT: 0.4 lbs UPC: 9420024148518

Read more less

12" Protective Cover - PlasticKeep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this plastic protective cover.Compatible Units: 8412/8412xsv 8612/8612xsv WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 1"H x 9"W x 12"L WT: 0.53 lbs UPC: 753759219123

Read more less

NSE/NSS Video/Data cableNSE / NSS Video/Comms Cable (8 pin conn. to bare wires for NMEA and 2 RCA female for Video in Port one and two) 2M (6.5') Specifications: Type: Cables Box Dimensions: 1"H x 5"W x 5"L WT: 0.55 lbs UPC: 042194901152

Read more less

Yamaha High Thrust Large Power Head 9.9, 15 (2005)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Suncover for HDS-12 LIVE Display Protective Suncover for HDS LIVE 12-inch displays. Specifications: Type: Covers Box Dimensions: 2"H x 10"W x 16"L WT: 0.91 lbs UPC: 9420024174760

Read more less

HDS-12 LIVE Gimbal BracketHDS-12 LIVE Bracket with knobs. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 7"W x 19"L WT: 0.9 lbs UPC: 9420024174807

Read more less

Adapter Plate for GPSMAP® 12x2 to 12x3 SeriesThis adapter bezel kit allows you to install a new GPSMAP 12x3 into the existing cutout of a GPSMAP 12x2 Touch, 12x2 Plus, 7412 or 7612 chartplotter in your dash. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 10"W x 15"L WT: 0.4 lbs UPC: 753759250843

Read more less

Protective Cover for GPSMAP® 8x22Keep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this protective cover.

Read more less

Marine Network Adapter Cable - Small (Female) to LargeAdapt the small network connector to the larger Garmin Marine Network connector with this cable — which is part of the Panoptix™ LiveScope ice fishing kit.

Read more less

Protective Cover for 5" ECHOMAP™ UHD2 ChartplottersGarmin cover to protect your compatible 5" ECHOMAP™ UHD2 from the harsh marine environment when not in use.*Sold as an Individual Specifications: Type: Covers Box Dimensions: 2"H x 6"W x 13"L WT: 0.4 lbs UPC: 753759284725

Read more less

Quarter Turn Locking CollarRoute cables without having to drill large holes in your vessel with this split connector. Newer Garmin cables do not have the locking collars factory-installed; this allows for easier installation when routing the cables through and behind cabinetry. The two-piece locking collar is attached to the connector.

Read more less

USB Cable for GPSMAP® 8400/8600Connect your GPSMAP 8400 or 8600 series chartplotter to a computer¹ using this 15-foot USB cable and a compatible HDMI cable (sold separately). This water resistant and secure connection allows you to touch the chartplotter screen to operate the computer¹, including the ability to see and touch the keyboard on the screen.¹Works with Apple® or Windows® 7, 8 or 10 computers. Apple is a registered trademark of Apple, Inc. Windows is a trademark of Microsoft Corporation in the United States and/or other countries.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cables Box Dimensions: 1"H x 6"W x 7"L WT: 0.45 lbs UPC: 753759143091

Read more less

Protective Cover for GPSMAP® 10x2 SeriesProtect your compatible marine device from the sun and scratches when not in use. This protective cover fits snugly over the display to avoid exposure. Compatible Devices: GPSMAP® 1022 GPSMAP® 1022xsv GPSMAP® 1042xsv GPSMAP® 1042xsv WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 2"H x 9"W x 14"L WT: 0.5 lbs UPC: 753759172565

Read more less

Tilt/Swivel Mounting BracketMount your echoMAP™ or GPSMAP® using this bracket. The mount swivels and tilts for optimum viewing.Compatible Devices: echoMAP™ 50dv echoMAP™ 50s GPSMAP® 547 GPSMAP® 547xs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 5"W x 6"L WT: 0.39 lbs UPC: 753759998356

Read more less

Power Cable - 8-PinPower and connect your compatible GPSMAP® device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visable or audible alerts.Compatible Devices: GPSMAP® 1020xs GPSMAP® 1040xs GPSMAP® 7407xsv GPSMAP® 7408xsv GPSMAP® 7410xsv GPSMAP® 7412xsv GPSMAP® 7416 GPSMAP® 7416xsv GPSMAP® 7607 GPSMAP® 7607xsv GPSMAP® 7608 GPSMAP® 7608xsv GPSMAP® 7610 GPSMAP® 7610xsv GPSMAP® 7612 GPSMAP® 7612xsv GPSMAP® 7616 GPSMAP® 7616xsv GPSMAP® 840xs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 1"H x 6"W x 8"L WT: 0.4 lbs UPC: 753759143022

Read more less

HDS-9 LIVE Gimbal BracketHDS-9 LIVE Bracket with knobs. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 7"W x 16"L WT: 0.83 lbs UPC: 9420064118298

Read more less

GPS-500 GPS Antenna for NAIS-500 AIS TransceiverGPS-500: GPS antenna for NAIS-500 AIS transceiver Specifications: Type: Antennas Box Dimensions: 3"H x 5"W x 9"L WT: 1.05 lbs UPC: 9420024158821

Read more less

Suncover for Simrad NSS12 evo3Make sure your NSS12 evo3 continues to work like new by protecting it with the Simrad 12" Suncover. This sturdily made cover fits your system perfectly. It protects your unit from overexposure to sun glare during long boat trips. The cover is UV ray resistant. Specifications: Type: Covers Box Dimensions: 1"H x 9"W x 14"L WT: 0.7 lbs UPC: 9420024160886

Read more less

Eagle 4" SuncoverThis 4-inch cover is designed for Lowrance Eagle displays.Features:Protects the marine environment Specifications: Type: Covers Box Dimensions: 2"H x 5"W x 9"L WT: 0.28 lbs UPC: 9420064135141

Read more less

GPS160 TriNav Sensor with USB OutputThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etcThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.The GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.The GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.Galileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.Features: 72 channel GPS, Glonassand Galileo GNSS positioning receiver Typically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy Can be configured as dedicated GPS, Glonass or Galileo only device Sophisticated anti-spoofing algorithm for robust positioning performance and interference rejection Available in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants GPS160USB also available with USB connection for PC/MAC User/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches Multiple formats of NMEA data output including datum information –user configurable through internal DIP switches Up to 18Hz update rate (user selectable) Ultra low (<20mA) power consumption at 12V DC Input for MOB switch/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter Professional system (ECDIS) support with datum sentence structure (DTM/GBS/GNS/GRS/GSA/GST) Puck installation or fits 3rd party industry standard 1” x 14 TPI threaded mount Specifications: Type: Antennas Box Dimensions: 4"H x 7"W x 10"L WT: 1 lbs UPC: 703791696048 Brochure (pdf)

Read more less

10" Protective Cover - PlasticKeep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this plastic protective cover.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 2"H x 10"W x 11"L WT: 0.4 lbs UPC: 753759219116

Read more less

iKreate NMEA 2000 Simulator with USBFor anyone involved in designing, manufacturing, or installing marine electronics, the ability to simulate or replay NMEA2000 data is a real advantage and can accelerate software development, demonstrate NMEA2000 devices, or help diagnose network issues.With more and more modern boats having an NMEA2000 network at the heart of their navigation system, it is really important that you have the tools to investigate the devices and data on the network should things not work as planned.Consisting of an iKreate USB interface and an HTML5-based web app, the iKreate simulator can generate any number of NMEA2000 PGNs or replay saved log files of real-life network data from any NMEA2000 system, regardless of brand.This package includes iKreate to connect to the NMEA 2000 network and the simulator software to generate any number of NMEA2000 PGNs.Just like our NMEA2000 Display App, the iKreate Simulator takes a new approach and is the World’s first multi-platform, browser-based NMEA2000 Simulator App that will run on Windows, LINUX, Mac OS X, and Raspbian. There is no installation, and if you can save a file and find it again, then that is as complex as it gets with just a single HTML5 file to worry about (less than 0.5MB in size).You need to use the app with a browser that supports the Web Serial API, which currently includes Chrome, Chromium, MS Edge, and Opera. We also plan to support Firefox going forward (with its WebSerial Extension), but this was not possible for the first release of the app.Features: Create individual NMEA 2000 PGNs from a drop-down list populated with the data you enter, or play back a NMEA 2000 log file captured by a Digital Yacht NMEA 2000 product, etc, from an on-board system Multiple PGN groups can be created and even saved for future use The data variance function can synthesise changing values No complicated software to install – just a simple file for Chrome, Edge, Opera or Chromium Functions on PC, MAC, and Linux platforms – simple USB connection Set SRC address and instance Integrated 0.8m NMEA 2000 and 0.8m USB cable Available with USB-C connector (USB-A option) What's In The Box? iKreate USB Interface Software to download via link Owner's Manual (pdf)

Read more less

LANLink NMEA 0183 To Ethernet GatewayMore and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.Features: NMEA 0183 to ethernet gateway version 12/24v DC low power operation Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection The web user interface for easy setup from the connected device via the browser TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP Bi-Directional The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS RS232 port for PC apps too Status indicators for power, data in-out, network link, and server status Set-Up: Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port Set up with fixed or dynamic IP address Status page for system diagnostics Specifications: Power: 10-35V DC (Consumption approx. 50mA at 12V DC) Network Port: Ethernet RJ45 10/100MB IP Mode: Static or DHCP Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183) NMEA 2000 option via iKonvertgateway Operating temp: -25 to +70 degrees C LED Indicators: Power -Status -Link -Data In -Data Out Options: RS232 connectivity (non-concurrent with NMEA) Dimensions (W x H): 95mm x 86mm

Read more less

Adapter Cable SeaTalk (1) to SeaTalkNG - 1MAn adapter spur cable to connect a SeaTalk device to a SeaTalkng network. The connection must be made via a 'bridging' device such as an ST70.SeaTalkNGRaymarine’s proprietary cable system for use in NMEA 2000 networks. The design provides two advantages. First, the connector collars are retained on the product which allows for a smaller cable diameter making installations easier. More importantly, the cable can include a sixth wire which allows for backward compatibility with SeaTalk1 equipment. Products with SeaTalkNG connectors can be used on NMEA 2000 networks that use Devicenet cabling through simple connector adapters and conversely equipment with Devicenet connectors can be used on NMEA 2000 networks that use SeaTalkng cabling through simple connector adapters.

Read more less

5M Cable for HALO Dome Radar/Nemesis™5M cable for HALO Dome Radar. Specifications: Type: Cables Box Dimensions: 2"H x 8"W x 8"L WT: 1.2 lbs UPC: 9420024173893

Read more less

Suncover for HDS-7 LIVE DisplayProtective Suncover for HDS LIVE 7-inch displays. Specifications: Type: Covers Box Dimensions: 1"H x 6"W x 11"L WT: 0.5 lbs UPC: 9420024174746

Read more less

Flush Mount Kit f/echoMAP™ Plus 9XsvLooking for a sleeker installation of your compatible marine device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 8"W x 12"L WT: 0.05 lbs UPC: 753759188757

Read more less

Panoptix LiveScope™ Transducer Extension Cable - 30' - 21-PinExtend the length of your compatible LiveScope™ transducer cable. Specifications: Type: Extension Box Dimensions: 3"H x 8"W x 10"L WT: 2.7 lbs UPC: 753759331191

Read more less

Trim Kit for Axiom Pro 12/eS12Raymarine Multifunction Display eS Series and Axiom Pro accessories trim kit. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 7"W x 10"L WT: 0.35 lbs UPC: 723193794449

Read more less

Bail Mount with Knobs for GPSMAP® 12x2 SeriesSurface mount your compatible GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.

Read more less