ALAS Adjustable Fuel Sender - 6-3/4 to 23" - 240-33 OhmVDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh. These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm.  For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low. Features: Connection - M4 Stud Voltage: 6-24V *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Gold Box Dimensions: 4"H x 4"W x 19"L WT: 1.2 lbs UPC: 754059001043

Read more less

Water Temperature Sensor - 1/4"-18NPT Thread - 120°C Temp Range These resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - 1/4"-18NPT Calibration - 120°C Measurement Range - 120°C Output Signals - Resistive IP67 Insulated ground pin

Read more less

Deep-Pipe Level Sender - 450mm - 90 to 4 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 450 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 90–4 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Box Dimensions: 4"H x 4"W x 30"L WT: 1.85 lbs UPC: 7640178726581

Read more less

Sender Fuel Level (American 8"-16") (Single)Features: 8 to 16 in. Fuel Level Sending Unit 8 in. to 16 in. tank depth Single station For use with US OHM scale gauges This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Water Temperature Sensor - M14x1.5 Thread - 120°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - M14x1.5 Calibration - 120°C Measurement Range - 120°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Diagnostic ToolVeratron's diagnostic tool is used for programming and troubleshooting.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Flange Adapter KitSmall but necessary instrument that will save your money and time.   Flange Adapter Kit for Tubular Level Sensors from 80 to 54mm.Flange Adapter Kit can be adapted to any Veratron liquid level sensors.Features:Tank mounting adapter from 80mm to 54mm*Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Diameter (Inches): N/A Box Dimensions: 1"H x 4"W x 4"L WT: 0.55 lbs UPC: 7640178729230

Read more less

Oil Pressure Sensor - 1/8"-27NPT Thread - 10 Bar Veratron’s Pressure Sensors deliver a stable quality reading during a long lifespan. They have excellent anti-vibration performance and a wide operating temperature range. The sensors can be used in a wide range of applications.All sensors come with a sensor output and an insulated ground pin.Features: Function - Engine oil pressure, transmission oil pressure Thread - 1/8"-27NPT Calibration - 10-184 Ohm Measurement Range - 10 bar Output Signals - Resistive Wide Operating Range - -25 to 120°C Insulated ground pin Quick Guide (pdf)

Read more less

Type E - Blue LED Wedge Bulb  Colored, long life LED bulbs are designed to fit in traditional wedge based bulb sockets. In addition to adding a dash of style, these LED bulbs draw less power, last 20,000 hours or more and operate at cooler temperatures.Features:Color - Blue*Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Blue Box Dimensions: 1"H x 5"W x 8"L WT: 0.1 lbs UPC: 754059057439

Read more less

Single Probe with Safety LeaderProbe ModesQuick data refresh rate—updates every 5 seconds in normal mode or every half-second in thermocline mode.

Read more less

Water Temperature Sensor - 1/2"-14NPT Thread - 120°C Temp Range These resistive temperature sensors are built in a housing of brass.All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors.The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - 1/2"-14NPT Calibration - 120°C Measurement Range - 120°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Pressure Sender 80 PSI 1/4-18 NPT Features: Ground - Standard Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Max. Pressure Range - 80 PSI / 5 bar (10-180Ohm) *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 2"H x 2"W x 5"L WT: 0.25 lbs UPC: 754059004679

Read more less

Type E Plastic Bulb SocketFeatures: Material - Plastic Class - Type E Connection - Spade *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Box Dimensions: 1"H x 5"W x 7"L WT: 0.5 lbs UPC: 754059017082

Read more less

NMEA 2000® Male Terminator Standard NMEA 2000® Male Terminator to be used with CAN BUS, Acqualink and OceanLink Gauges and Equipment.*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Engine Oil Temperature Sensor - 1/2"-14NPT Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - 1/2"-14NPT Calibration - 150°C Measurement Range - 150°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Water Temperature Sensor - M16x1.5 Thread - 120°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - M16x1.5 Calibration - 120°C Measurement Range - 120°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Engine Oil Temperature Sensor - M14x1.5 Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - M14x1.5 Calibration - 150°C Measurement Range - 150°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Reed Switch Fuel Sender - 230 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 9.2" (230mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 10"L WT: 0.6 lbs UPC: 754059064512

Read more less

Reed Switch Fuel Sender - 600 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 23.6" (600mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 27"L WT: 1 lbs UPC: 754059064468

Read more less

Fresh Water Level Sensor with Sealing Kit #370 - 12-24V - 4-20mA - 80-600mm LengthFresh Water Level Sensor (capacitive) with adjustable dip, sealing kit. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Type A - White Metal Base Bulb - 12V - 4-PackFeatures: Voltage - 12V Watts - 2W Size - 9/32" (7mm) Color - White/Clear *Sold as a 4 PackWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Box Dimensions: 1"H x 5"W x 8"L WT: 0.1 lbs UPC: 754059005775

Read more less

LinkUp Intelligent Battery Sensor Gateway - 12V - 500AHEasily installed LinkUp gateway modules replace the original wiring, delivering power to the LinkUp device and sensor from the NMEA 2000 backbone while still compliant with the NMEA 2000 certification. Thanks to their passive wireless receiver, the configuration is done in a snap using your mobile device, and the LinkUp Configurator app is available for Android and iOS devices. The sensor parameters are configured to type, instance, and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Specifications: Operating voltage - 6-18V Permanent load current - ±200A Maximum current - ±1500A Maximum battery capacity - 500Ah Threaded GND bolt - M6 Power consumption - ≤ 15 mA (normal mode) Output signal - NMEA 2000® Dimensions - 125mm x 32mm (+cables) Protection class - IP X9/K (LinkUp) IP6K7 (Sensor) Operating temperature - -40°C to +115 °C Flammability - UL94 Housing material - PC-FR Compliance - CE, UKCA, Reach, RoHS, ISO8846:1990 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Double Glazed Lens - 100MMReplacement lens for Vanguard and BlueLine 100 mm gauges.Features:Plastic Double Anti-Fog *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Clear Box Dimensions: 1"H x 4"W x 4"L WT: 0.1 lbs UPC: 7640178727052

Read more less

52MM (2-1/16") Gauge SpinlockFeatures: Spinlock nut for 52MM ( 2-1/16") gauges Color - White *Sold as a singleThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: White Box Dimensions: 2"H x 3"W x 7"L WT: 0.1 lbs UPC: 7640178726819

Read more less

Reed Switch Fuel Sender - 300 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 11.8" (300mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 14"L WT: 0.7 lbs UPC: 754059064413

Read more less

Fresh Water Level Sensor (Resistive) with Adjust Lever & Seal Kit #750 - 12/24V - 200-600mm LengthFresh Water Level Sensor (resistive) with adjustable lever, sealing kit N05-008-750. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Temperature Sender 250°F/120°C Dual FG - 1/4-18 NPTF Features: Ground - Floating Connection - .25" Spade Voltage - 6-24V Thread - 1/4-18 NPTF Component Reference No. - 805/1/4 Max. Temperature Scale - 250°F/120°C  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 1"H x 5"W x 8"L WT: 0.15 lbs UPC: 754059003092 Brochure (pdf)

Read more less

Light Diffuser for Type D Peanut Bulb - Red - 4 PackFeatures: Red in color Application - Type D Peanut Bulbs *Sold as a 4 PackWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red Box Dimensions: 1"H x 4"W x 4"L WT: 0.1 lbs UPC: 754059005980

Read more less

NavControl TFT Controller for AcquaLink® & OceanLink® - BlackFeatures: Color: Black NavControl TFT Controller Specifically for AcquaLink® and OceanLink® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Deep-Pipe Level Sender - 300mm - 0 to 180 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 300 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 0 to 180 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Box Dimensions: 4"H x 4"W x 17"L WT: 1.2 lbs UPC: 7640178725430

Read more less

Deep-Pipe Level Sender - 500mm - 0 to 180 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 500 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 0 to 180 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Box Dimensions: 4"H x 4"W x 30"L WT: 1.95 lbs UPC: 7640178725638

Read more less

Deep-Pipe Level Sender - 160mm - 240 to 33 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 160 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 240 to 33 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Box Dimensions: 2"H x 4"W x 9"L WT: 1 lbs UPC: 7640178725799

Read more less

Bracket Assembly Mounting Set - Viewline GaugesFor omitting the fastening nut.  This is recommended if the installation location is subject to vibratory loads.  Screw the stud bolts into the provided drill holes in the enclosureFeatures:Designed for 52mm, 85mm and 110mm GaugesFor Panel Installation *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Sealing Kit for Water Capacitive SensorSealing Kit for Fresh Water Level Sensor.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Engine Oil Temperature Sensor - Single Pole, Common Ground - 50-150°C/120-300°F - 6/24V - M14 x 1.5 ThreadFeatures: Single Pole, Common Ground 50-150°C/120-300°F 6/24V M14 x 1.5 Thread This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

32-Pin Power Cable Single Engine Set-Up - .5M32-pin power cable for single engine.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Bus Cable - 10M for AcquaLink® GaugesVDO Marine Bus Cable - 10M.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less