Ethernet Cable - 10 FeetQuickly setup an ethernet connection between two Humminbird ethernet capable units.Available in four lengths.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 10' Box Dimensions: 2"H x 8"W x 9"L WT: 0.3 lbs UPC: 082324509162 Owner's Manual (pdf)

Read more less

BlueNet™ Network Cable - 40' Our Garmin BlueNet marine network cables offer additional cable lengths to help with installations WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 39' Box Dimensions: 1"H x 9"W x 9"L WT: 1 lbs UPC: 753759170615

Read more less

Ethernet Cable for M-Series - 25'FLIR's 25' Ethernet Cable is for connecting the FLIR M-Series Cameras tothe Joystick Control Unit.Features: Double Shielded RJ-45 LSZH 25' long Specifications: Cable Length (Feet): 25' Box Dimensions: 2"H x 7"W x 8"L WT: 0.6 lbs UPC: 815121010773

Read more less

MPower 12 Channel DC Load Controller Module with NMEA 2K - No ConnectorsDesigned for vessels of all sizes with smaller loads, the MPower® CLMD12 is a compact 12-Channel DC Load Controller Module. Two of the 12 breakers handle a maximum of 12 amps, six handle a maximum of 10 amps, and four handle a maximum of 5 amps, with a total current capacity of 75 Amps. Additionally, circuits can be paralleled.If a smaller circuit needs to be protected, each of the 12 breakers can be set to trip at lower current levels using the new Maretron N2KAnalyzer® V3 software. In addition, the CLMD12 has inputs for up to 7 hard-wired switches that can be used to switch breaker states, or as inputs for other data, such as bilge alarms or hatch positions, etc.The CLMD12 handles many DC load types such as lights, pumps, motors, and electronics. An added benefit of the CLMD12 is that it reports the current through each of the 12 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and undercurrent conditions, such as burnt-out bulbs.For manual control of the loads, an optional MPower 12-Channel Bypass Module (CBMD12) can be installed in conjunction with the CLMD12.Features: NMEA 2000® Interface IP67 Rated Ignition Protected Opto-isolated from NMEA 2000®, eliminating potential ground loops Twelve (12) dimmable Electronic Circuit Breakers (ECBs) for On/Off Control over NMEA 2000® network 2 breakers capable of carrying up to 12 Amps 6 breakers capable of carrying up to 10 Amps 4 breakers capable of carrying up to 5 Amps Individual breaker electrical current monitoring Breakers can have Power-Up states defined (ON, OFF, or PREVIOUS STATE) Breakers can be locked against inadvertent actuation. Seven (7) discrete inputs configurable as Active High or Active Low Automatic ECB overcurrent shutdown Automatic ECB thermal shutdown (Overtemperature Protection) Applications: Remote control of navigation lights Remote control of boarding lights Burnt-out bulb alerts Control of area lights with dimming This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: AC/DC: DC Touchscreen: No Box Dimensions: 4"H x 7"W x 10"L WT: 1.8 lbs UPC: 873804004105 Quick Guide (pdf)

Read more less

RJ45 to HUB102 Cable 0.5M Waterproof RJ45 (M) to RJ45 AdapterFuruno's waterproof RJ45 (M) to RJ45 Adapter Cable.Specifications: Length: 0.5M Waterproof This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

J1 Output Mating Connector with 3M Leads-CLMD12Output (J1) Mating Connector with 12" flying leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 9 Box Dimensions: 1"H x 7"W x 7"L WT: 0.8 lbs UPC: 873804004167

Read more less

12 Circuit Bypass Module NMEA 2K without Fuse Pack & Jumper WireFor manual control of the loads, an optional MPower® 12-Channel Bypass Module (CBMD12) can be installed in conjunction with the 12-Channel DC Load Controller Module (CLMD12). The maximum current capacity for the CBMD12 is 75 amps in 12V DC and 24V DC power systems.The Bypass Module provides a manual method (ON/OFF switch) to control loads by providing power to each load in case of a CLMD12 malfunction or a NMEA 2000® network failure. The CBMD12 utilizes standard fuses for overcurrent protection and 12 Carling Curvette® Rocker Switches for manual control of each load. With the use of the Curvette rocker switches, there is no arcing that occurs while manually overriding a load. Furthermore, unlike other digital switching products, MPower does not require moving a fuse, which can cause electrical connections to degrade or the possibility of ignition.It’s important to ensure that the current rating of the fuse for each load is appropriate to protect the load and the wiring for that load. Please note that the bypass module does not support paralleled outputs, since each circuit is controlled by a separate switch. Additionally, the bypass module does not support dimming of circuits.Features: 75 Amps maximum current capacity Outputs 12A Max (two outputs) 10A Max (six outputs) 5A Max (four outputs) 12V and 24V DC power systems Carling Technologies Curvette® Rocker Switches Overcurrent protection via ATC standard fuses This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

J2 Output Mating Connector with 3M Leads-CLMD12Input (J2) Mating Connector with 12" flying leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 9 Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs UPC: 873804004174

Read more less

CLMD16-J3 I/O Mating Connector KitJ3 (I/O Gen Purpose) Harness Kit with 1m Flying Leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

NavNet TZtouch2 Black Box Chartplotter/FishfinderTotal Control, Simply RefinedWith the ability to drive multiple monitors with full HD HDMI video output in any combination of monitor aspect ratios (4:3 and 4:3, 16:9 and 4:3, or 16:9 and 16:9), a refined graphical user interface, and a built-in RezBoost Fish Finder, Furuno's NavNet TZtouch2 Black Box is a beauty to behold and use. Whether you are searching for hot fishing grounds, plotting your next route, or using your Radar to navigate through fog, NavNet TZtouch2 delivers smooth operation with familiar touch gestures.Simply Refined, Simply BeautifulFollowing in the footsteps of the original NavNet TZtouch, TZtouch2 features a refined user interface that is all about usability. Elegantly designed, NavNet TZtouch2 allows you to build a navigation suite that is not only functional, but offers a luxurious look and feel. Taps, swipes, pinches, and custom multi touch gestures are instantly transformed into action, giving you full control of every component connected to your network.Incredibly easy-to-use controller and graphical user interfaceThe optional MCU005 NavNet TZtouch2 Black Box controller enhances the built-in Multi Touch graphical user interface, and sets a new benchmark for "easy to use" in the marine electronics industry. This interface is not only intuitive, but is as easy to use as the phone in your pocket. The combination of an ergonomically designed, logical controller, along with a touch-screen Graphical User Interface, make operation simple. With taps, slides and swipes, you will be up and using your TZtouch2 in no time at all. Menus and other features slide out from each of the sides of the screen, ensuring that the most important tasks are literally right at your fingertips.The available MCU004 Remote Control option features a large rotary knob which can be utilized for zooming in/out, while the joy stick allows you to pan around the chart and move the cursor on the screen. The MCU004 remote has 8 dedicated buttons that operate different functions, such as Edge Swiping, Home, Stand By/Auto for Autopilot control, MOB, and Center on vessel.Powerful Fish Finder with built-in Furuno featuresThe built-in Fish Finder is a dual-frequency (50/200kHz), 600W/1kW power output sounder. It includes Furuno’s unique Bottom Discrimination and AccuFish modes, and also incorporates another new Furuno proprietary Fish Finder technology, called RezBoost. RezBoost is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fantastic target resolution and separation, without the need to change out your transducer, or purchase expensive broadband transducers. With RezBoost, you can now achieve target separation and resolution that was previously limited to Furuno commercial-grade Fish Finders.Freedom to build the helm of your dreamsNavNet TZtouch2 is a component-based system that utilizes Furuno’s award winning network products. You can add a variety of UHD Radars, from a 4kW NXT Dome up to a 25kW X-Class Open Array. As with NavNet TZtouch, you can integrate, display, and control the NavPilot Autopilot, and Furuno’s FI70 Instrument. Both of these products have displays that match TZtouch2, giving your helm a beautiful all-glass finish. Additional sensors that can be added to the network include AIS, Weather Fax, Sirius/XM Satellite Weather, Fusion Marine Stereo, and IP Cameras, as well as NMEA2000 and Furuno CAN bus devices. It even includes one NMEA0183 output port to send data to legacy systems.Remotely view and control your bridge with apps for your smartphone and tablet Engineered to utilize the latest technology, NavNet TZtouch opens the door to cutting edge WiFi features, such as tablet and smartphone apps, points of interest (POI), real time weather data, software updates and more. Take full control of your NavNet in a whole new way. The TZtouch Remote app allows you to operate your system remotely with your smartphone or tablet over WiFi, when connected to the network.MapMedia Raster and Vector Chart LibraryFreely choose the charts that fit your individual needs and preference. MapMedia's NOAA Raster and Vector charts for the U.S. Coasts, Gulf of Mexico, Alaska and Hawaii come pre-loaded. In addition, MapMedia brings you free satellite photos and detailed fishing bathymetric charts that can be download for the U.S. Outside of the U.S., "C-MAP" and "Datacore by Navionics" vector cartography can be purchased and downloaded to your NavNet with ease. MapMedia cartography integrates cutting edge algorithms with high resolution image processing techniques to deliver a fusion of digital navigation charts and satellite photography. Satellite PhotoFusion™ offers a birds-eye view without obstruction of critical dataYou can load any two ultra-wide high-resolution satellite photo areas at your convenience. Land areas (zero depth) are completely opaque, so these areas are displayed as high-resolution satellite photos on the chart. As the depth increases, the satellite photography becomes more transparent. This allows you to see where the shallows end and the deeper water begins, while still allowing the raster or vector chart to be visible.Free & easy-to-use marine weather forecastsThe weather tool is completely free and easy to use, giving you unlimited access to weather forecasts worldwide 24 hours a day provided by NavCenter. Select geographic coverage, data type, period of time, and then choose how to receive the file. NavNet TZtouch2 provides up to 16 days of weather forecasting.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

ETHEXT-25YL25 ft. Ethernet CableWorks with: Broadband Sounder-1, GlobalMap 5200C, GlobalMap 5300C iGPS, GlobalMap 7200C, GlobalMap 7300C HD, GlobalMap 8200C, GlobalMap 8300C HD, GlobalMap 9200C, GlobalMap 9300C HD, GlobalMap Baja 540C, GlobalMap Baja 840C, LCX-112C, LCX-113C HD, LCX-27C, LCX-28C HD, LCX-37C, LCX-38C HD, LMS-520C, LMS-522C iGPS, LMS-525C DF, LMS-527C DF iGPS, Navico Expansion Port-1 Specifications: Cable Length (Feet): 25' Box Dimensions: 3"H x 4"W x 10"L WT: 0.7 lbs UPC: 042194532059

Read more less

RNS-5 5 Port RayNet Gigabit SwitchThe RNS-5 network Gigabit switch is designed for expanding Raymarine integrated chartplotter systems using RayNet high-speed Ethernet cabling. Use the RNS-5 to integrate Axiom displays with radars, sonar modules, IP cameras, and Teledyne FLIR thermal cameras. The RNS-5 also supports networking with Raymarine YachtSense digital control systems and the YachtSense Link marine mobile router. Two RNS-5 switches can be daisy-chained together for larger systems. The RNS-5 is simple to install and requires no complicated setup.Features: 5 RayNet Ethernet gigabit ports for fast and reliable connectivity Rugged IPX6 and IPX7 construction Reliable, waterproof RayNet connector Ethernet cable ports Designed for simple bulkhead mounting LED power and network port status indicators Unmanaged- simply plug and play with Raymarine devices No complicated setup or configuration Quick Guide (pdf)

Read more less

HUB102 5-Port Marinized Ethernet HubHUB102 Marinized Ethernet Hub, designed to simplify marine connectivity with up to gigabit speed performance. Supporting multiple sensors and Furuno Multi-Function Displays (MFDs), the HUB102 features water-resistant connections and sealed covers to protect unused data ports. With LED indicators for power and port status, setup is a breeze—plug in peripherals, and they’re instantly detected. Expand any NavNet TZtouch system effortlessly by adding up to six HUB102s to the network.Features: Five Ethernet ports with twist-lock waterproof connectors Transfer speed: Gigabit full duplex, 10Mbps/100Mbps half/full duplex Connect up to (6) HUB102 for expanded network capabilities Compatible with virtually all Ethernet devices LED status indicators for power and network ports Simple bulkhead or deck mounting with no setup required This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

RNS-8 Network Switch - 8 Port Raynet Network SwitchThe RNS-8 network switch is a premium network switch for integrated Raymarine chartplotter systems. Use the RNS-8 to integrate Axiom displays with radars, sonar modules, and FLIR thermal cameras. The RNS-8 features 4 dedicated Power-Over-Ethernet (POE) ports for integrating and powering POE-compatible devices like CAM300 marine IP cameras and RMK-10 remote keypads. The RNS-8 also supports networking with Raymarine YachtSense digital control systems and the YachtSense Link marine mobile router. Multiple RNS-8 switches can be daisy-chained together for larger systems. The RNS-8 is simple to install and requires no complicated setup.Features: 8 RayNet Ethernet gigabit ports for fast and reliable connectivity 4 dedicated Power-Over-Ethernet (POE) ports for powering cameras and remotes Rugged IPX6/IPX7 construction Reliable, waterproof RayNet connector Ethernet cable ports Designed for simple bulkhead mounting LED power and network port status indicators Unmanaged- simply plug and play with Raymarine devices. Remote diagnostics and performance monitoring via web browser For extended networks, up to 8 RNS-8 switches can be daisy-chained together

Read more less

BlueNet™ 30 Gateway The Garmin BlueNet 30 gateway is required for Garmin BlueNet™ network compatible devices to network with legacy Garmin marine devices. Through this gateway, you can connect a Garmin BlueNet network to a legacy Garmin Marine Network for a premium control experience.In the Box: Garmin BlueNet 30 Gateway Power cable Mounting hardware Garmin BlueNet™ network cable (2 meters) Documentation

Read more less

WM-4 SiriusXM® Marine Satellite Weather & Audio AntennaTracking of weather is easier than ever with the WM-4 Receiver for Simrad, Lowrance, and B & G multifunction displays. The WM-4 provides live, up-to-date weather information and forecasting to give you peace of mind, no matter when or how you are using your boat. The weather information is obtained from the weather industry’s leading experts and is delivered via a digital receiver through SiriusXM’s Marine Weather services.Receive high-quality and comprehensive weather information and forecasting that you can overlay directly onto your raster and vector charts. The WM-4 brings you premium weather content, such as current weather reports, NOWRad® nationwide high-resolution weather radar imagery, and high-resolution Sea Surface Temperature images that can help fishermen locate fishing hot spots. Hardware and the SiriusXM weather service subscription are sold separately.The WM-4 Receiver also provides access to over 150* channels of SiriusXM satellite radio service which can be added at a discounted rate to the Marine subscription. For more information about SiriusXM Marine service features and pricing in the US visit siriusxm.com/marine and in Canada visit siriusxm.ca/marine.*Canadian SiriusXM satellite radio subscribers will have access to over 130 channels at a discounted rate with the marine subscription.Compatible with Lowrance HDS LIVE and HDS Carbon, Simrad NSS evo3 and NSO evo3, and B & G Zeus3 and Zeus3 Glass Helm.Features: Real-time SiriusXM marine weather information Detailed NOAA Marine Zone Forecasts NOWrad™ weather radar storm cell attributes Weather Radar, Lightning, Alerts, and Watch Boxes Marine Zone Forecasts and Sea Surface Temps Wind and Wave Forecasts, Buoy Data Fish Mapping coming in 19.3 software update Now available in Canada Compact with easy deck or pole-mount installation options Subscriptions sold through SiriusXM® Specifications: Cable Length (Feet): 8' Box Dimensions: 4"H x 8"W x 18"L WT: 3.8 lbs UPC: 9420024178911

Read more less

BlueNet™ Network Cable - 20'The Garmin BlueNet marine network cables offer additional cable lengths to help with installations. Additional sizes are sold separately.

Read more less

6ft Marine network cable, RJ45WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 6' Box Dimensions: 3"H x 5"W x 5"L WT: 0.3 lbs UPC: 753759046125

Read more less

SR200 InfoLINK SiriusXM Receiver for MFDsThe Raymarine SR200 InfoLINK receiver brings subscription-based SiriusXM Marine weather and satellite radio to your Raymarine LightHouse 3 multifunction displays. SiriusXM Marine is graphical weather and fishing information for boaters.  Essential information like weather radar, NEXRAD storm cell tracking, tropical storm tracks, and localized forecasts are all easily viewable inside the LightHouse 3 chart application.  Fishermen can enjoy expanded information including high-resolution coastal and offshore sea surface temperature overlays, also displayed on the live navigation chart. The SR200 InfoLINK receiver can also provide access to over 150 channels of SiriusXM Satellite Radio programming including commercial-free music, sports, talk, entertainment, politics, comedy, religion, news, and much more.  The SR200 features an analog line output connection that you can easily connect to the auxiliary input on most marine stereo systems.  SiriusXM channel selection presets and controls are accessed from Raymarine’s LightHouse 3 SiriusXM app.Super-compact and simple to install, the SR200 connects to the RayNet high-speed Ethernet network and seamlessly delivers content to all your multifunction displays.  A low-profile Shakespeare SRA-50 SiriusXM Marine antenna kit is included.  The antenna can be mounted on any horizontal surface with a clear view of the sky or pole mounted with the included threaded adapter. SiriusXM Marine service is available in the continental United States, southern Canada, and coastal waters.  The SR200 InfoLINK receiver requires a valid activation and subscription to SiriusXM Marine Weather and/or SiriusXM Satellite radio, sold separately.  Please visit www.siriusxm.com/marine for full details on features, packages, pricing, and the most up-to-date satellite coverage map.Features: Delivers SiriusXM weather and audio content to Raymarine LightHouse 3 Multifunction Display Systems Receive up-to-the-minute weather forecasts, alerts, weather radar, sea surface temperature charts, and more Access 150+ channels of SiriusXM Satellite Radio Compatible With: Axiom Axiom Pro Axiom XL **Requires LightHouse 3.9 or newer software** Weather Subscription Options:SiriusXM Marine Weather - Marine Offshore and Coastal PackagesAudio Subscription Options:SiriusXM Channel Line-UpWhat’s in the Box? SR200 InfoLINK SiriusXM Receiver Shakespeare SRA-50 SiriusXM Antenna with pole and surface mounting kits SRA-50 interconnect cable (25 feet) SR200 InfoLINK to RayNet Interface cable (2 meters) Analog stereo (L/R) line output cable (2 meters) Power Cable (2 meters) Mounting hardware Installation guide and documentation kit

Read more less

NavAlert NMEA Monitor & Alarm SystemNavAlert is Digital Yacht’s latest innovation and allows an alarm to be set for any parameter that’s available on the boat’s NMEA 2000 network. That could be navigation data such as depth, heading, or speed, as well as electrical data such as voltage and engine/generator data including temperature, pressure, tank levels, fuel flow, etc.It connects anywhere on the NMEA 2000 network and takes power from this connection, so installation is super simple. A local WiFi network is created by NavAlert, so setup is possible via any smartphone, tablet, or PC. Simply choose the parameter to monitor and set an alarm level.Alarms/AlertsIntegrated into NavAlert is a custom alarm for anchor drift using an algorithm to calculate the optimum drift radius based on depth and the scope of the chain for reliable notifications. There’s also an anti-collision alarm based on CPA (closest point of approach) and TCPA (time to the closest point of approach) AIS data from a connected AIS. These alerts can also be monitored through the wireless interface with attractive graphical displays of current status.Alarms can also generate an SMS message, which can be relayed through Digital Yacht’s 4GXtream internet connectivity solution, allowing remote monitoring, which is great for feeling secure that the anchor is holding well when enjoying a lunch ashore. Alarms are independent of any alarms set on a plotter, allowing NavAlert to operate even without a primary multi-function display being powered up (an important feature for power-limited sailboats).Alerts can also be relayed to compatible multi-function devices (Garmin supports this function) for a pop-up data window indicating an alert and the ability to acknowledge it.*NavAlert is universal, using the industry standard NMEA 2000 data protocol, so it will integrate with all leading brands and systems.OperationThe operation is simple. Simply search for the WiFi network that NavAlert creates and connect via a smartphone or tablet. Open a browser and connect to NavAlert, and users are presented with a clear graphical interface allowing easy setup, configuration, and viewing of the alerts and network data. NavAlert constantly monitors the whole network, so alert parameters can be set for any variable.Users can configure the NavAlert through its simple web interface. Just open a web browser, enter the NavAlert’s IP address, and users can change the network name and password, or even merge the WiFi to an existing WiFi network on board… So no complicated programming software or app is required.Features:Multiple parameters can be monitoredSpecifications: Universal NMEA 2000 alarm and monitoring solution Set a configurable audio and visual alarm for any parameter on the NMEA 2000 network – for instance: shallow depth, low fuel level, off course, engine temp, tank levels, low voltage, etc Relay the alert via the NMEA 2000 bus to a Garmin multi-function display to deliver a popup alarm window SMS alerting through Digital Yacht’s 4G Xtream system to a mobile – ideal for remote monitoring of the boat. Built-in unique anchor drift alarm Built-in AIS collision avoidance alarm What’s In the Box: 1m NMEA2000 drop cable WiFi antenna built-in Owner's Manual (pdf)

Read more less