SPL1500 Antenna Splitter VHF/AISAn AIS receiver or transponder requires a VHF antenna, but Digital Yacht’s SPL1500 AIS-VHF antenna splitter allows an existing antenna to be used for both the AIS and VHF (DSC). Unlike most simple splitters, it can also be used with a class B transponder system and it incorporates special circuitry to ensure safe operation of the two transmitting devices.The unit has three simple connections - one input for the main VHF antenna and then outputs for the AIS receiver/transponder and another for the DSC VHF. It utilizes Digital Yacht’s ZeroLoss™ technology, to ensure the very best possible reception and transmission from all devices. Most importantly it is also fail safe, so should the unit ever stop working or lose power, it will not affect the main VHF operation. Until now, Digital Yacht, have recommended a dedicated antenna for a receiver or transponder.  However, with the new this new ZeroLoss™ technology, we can now offer a solution that greatly simplifies installation whilst maintaining performance.The unit is waterproof and matches the aesthetics of the current AIT1500, so can easily be integrated into any vessel. It is suitable for operation on 12V or 24V systems and features three status LEDs that show the unit is powered correctly and when the AIS or VHF transmits.Features:  Enables an existing VHF antenna to be used for both the standard VHF and AIS system ZeroLoss™ technology for exceptional performance Works with all Class B transponders and receivers Supplied with power cable, PL259-PL259 cable assembly and BNC-BNC cable assembly for easy installation (all cables 0.75m long) 12V or 24V 0peration and low power consumption Fail safe operation Same size and design as the AIT1500 Makes installation of an AIS receiver or transponder very quick and simple Saves on additional antenna clutter

Read more less

Field Installable Adapter Kit for Garmin BlueNet™ NetworkUse these field installable connectors to wire a Garmin BlueNet™ network cable that does not have a factory-installed connector. Owner's Manual (pdf)

Read more less

SR200 InfoLINK SiriusXM Receiver for MFDsThe Raymarine SR200 InfoLINK receiver brings subscription-based SiriusXM Marine weather and satellite radio to your Raymarine LightHouse 3 multifunction displays. SiriusXM Marine is graphical weather and fishing information for boaters.  Essential information like weather radar, NEXRAD storm cell tracking, tropical storm tracks, and localized forecasts are all easily viewable inside the LightHouse 3 chart application.  Fishermen can enjoy expanded information including high-resolution coastal and offshore sea surface temperature overlays, also displayed on the live navigation chart. The SR200 InfoLINK receiver can also provide access to over 150 channels of SiriusXM Satellite Radio programming including commercial-free music, sports, talk, entertainment, politics, comedy, religion, news, and much more.  The SR200 features an analog line output connection that you can easily connect to the auxiliary input on most marine stereo systems.  SiriusXM channel selection presets and controls are accessed from Raymarine’s LightHouse 3 SiriusXM app.Super-compact and simple to install, the SR200 connects to the RayNet high-speed Ethernet network and seamlessly delivers content to all your multifunction displays.  A low-profile Shakespeare SRA-50 SiriusXM Marine antenna kit is included.  The antenna can be mounted on any horizontal surface with a clear view of the sky or pole mounted with the included threaded adapter. SiriusXM Marine service is available in the continental United States, southern Canada, and coastal waters.  The SR200 InfoLINK receiver requires a valid activation and subscription to SiriusXM Marine Weather and/or SiriusXM Satellite radio, sold separately.  Please visit www.siriusxm.com/marine for full details on features, packages, pricing, and the most up-to-date satellite coverage map.Features: Delivers SiriusXM weather and audio content to Raymarine LightHouse 3 Multifunction Display Systems Receive up-to-the-minute weather forecasts, alerts, weather radar, sea surface temperature charts, and more Access 150+ channels of SiriusXM Satellite Radio Compatible With: Axiom Axiom Pro Axiom XL **Requires LightHouse 3.9 or newer software** Weather Subscription Options:SiriusXM Marine Weather - Marine Offshore and Coastal PackagesAudio Subscription Options:SiriusXM Channel Line-UpWhat’s in the Box? SR200 InfoLINK SiriusXM Receiver Shakespeare SRA-50 SiriusXM Antenna with pole and surface mounting kits SRA-50 interconnect cable (25 feet) SR200 InfoLINK to RayNet Interface cable (2 meters) Analog stereo (L/R) line output cable (2 meters) Power Cable (2 meters) Mounting hardware Installation guide and documentation kit

Read more less

Marine Network Cable PoE Isolation CouplerConnect a FLIR M- or MD- Series camera to a compatible 8000 series Garmin chartplotter with this PoE (Power over Ethernet) isolation coupler. The coupler provides connectivity to the Garmin Marine Network; without it the network will not function correctly and could possibly damage your Garmin unit and/or PoE device.Compatible Devices: GPSMAP® 8008 MFD GPSMAP® 8012 MFD GPSMAP® 8015 MFD GPSMAP® 8208 MFD GPSMAP® 8212 MFD GPSMAP® 8215 MFD GPSMAP® 8500 Black Box GPSMAP® 8530 Black Box WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

NavAlert NMEA Monitor & Alarm SystemNavAlert is Digital Yacht’s latest innovation and allows an alarm to be set for any parameter that’s available on the boat’s NMEA 2000 network. That could be navigation data such as depth, heading, or speed, as well as electrical data such as voltage and engine/generator data including temperature, pressure, tank levels, fuel flow, etc.It connects anywhere on the NMEA 2000 network and takes power from this connection, so installation is super simple. A local WiFi network is created by NavAlert, so setup is possible via any smartphone, tablet, or PC. Simply choose the parameter to monitor and set an alarm level.Alarms/AlertsIntegrated into NavAlert is a custom alarm for anchor drift using an algorithm to calculate the optimum drift radius based on depth and the scope of the chain for reliable notifications. There’s also an anti-collision alarm based on CPA (closest point of approach) and TCPA (time to the closest point of approach) AIS data from a connected AIS. These alerts can also be monitored through the wireless interface with attractive graphical displays of current status.Alarms can also generate an SMS message, which can be relayed through Digital Yacht’s 4GXtream internet connectivity solution, allowing remote monitoring, which is great for feeling secure that the anchor is holding well when enjoying a lunch ashore. Alarms are independent of any alarms set on a plotter, allowing NavAlert to operate even without a primary multi-function display being powered up (an important feature for power-limited sailboats).Alerts can also be relayed to compatible multi-function devices (Garmin supports this function) for a pop-up data window indicating an alert and the ability to acknowledge it.*NavAlert is universal, using the industry standard NMEA 2000 data protocol, so it will integrate with all leading brands and systems.OperationThe operation is simple. Simply search for the WiFi network that NavAlert creates and connect via a smartphone or tablet. Open a browser and connect to NavAlert, and users are presented with a clear graphical interface allowing easy setup, configuration, and viewing of the alerts and network data. NavAlert constantly monitors the whole network, so alert parameters can be set for any variable.Users can configure the NavAlert through its simple web interface. Just open a web browser, enter the NavAlert’s IP address, and users can change the network name and password, or even merge the WiFi to an existing WiFi network on board… So no complicated programming software or app is required.Features:Multiple parameters can be monitoredSpecifications: Universal NMEA 2000 alarm and monitoring solution Set a configurable audio and visual alarm for any parameter on the NMEA 2000 network – for instance: shallow depth, low fuel level, off course, engine temp, tank levels, low voltage, etc Relay the alert via the NMEA 2000 bus to a Garmin multi-function display to deliver a popup alarm window SMS alerting through Digital Yacht’s 4G Xtream system to a mobile – ideal for remote monitoring of the boat. Built-in unique anchor drift alarm Built-in AIS collision avoidance alarm What’s In the Box: 1m NMEA2000 drop cable WiFi antenna built-in Owner's Manual (pdf)

Read more less

AS EC 5E Ethernet Cable - 5'This Ethernet Cable is a 5' cable that allows the connection of two Ethernet capable unit to be connected. AS EC QDE may be required with some Humminbird models.  AS EC QDE may be required with some Humminbird models. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 5' Box Dimensions: 2"H x 8"W x 9"L WT: 0.4 lbs UPC: 082324054235

Read more less

BlueNet™ Network to RJ45 Adapter CableUse this adapter cable to connect your compatible third-party, OneHelm™ digital switching and Fusion® equipment, with an RJ45 port, to the Garmin BlueNet network.

Read more less

RNS-5 5 Port RayNet Gigabit SwitchThe RNS-5 network Gigabit switch is designed for expanding Raymarine integrated chartplotter systems using RayNet high-speed Ethernet cabling. Use the RNS-5 to integrate Axiom displays with radars, sonar modules, IP cameras, and Teledyne FLIR thermal cameras. The RNS-5 also supports networking with Raymarine YachtSense digital control systems and the YachtSense Link marine mobile router. Two RNS-5 switches can be daisy-chained together for larger systems. The RNS-5 is simple to install and requires no complicated setup.Features: 5 RayNet Ethernet gigabit ports for fast and reliable connectivity Rugged IPX6 and IPX7 construction Reliable, waterproof RayNet connector Ethernet cable ports Designed for simple bulkhead mounting LED power and network port status indicators Unmanaged- simply plug and play with Raymarine devices No complicated setup or configuration Quick Guide (pdf)

Read more less