HS-WS-SS Mounting KitMounting kit for transom mount 83/200 kHz skimmer transducers Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbs UPC: 042194504995

Read more less

Transducer Adapter Cable f/P72, P79, GT15 & GT30 for echoMAP™ CHIRPConnect a Garmin GT30 transom mount scanning transducer and a Garmin GT15M-IH, Airmar P72 or Airmar P79 in-hull mount traditional transducer to a compatible echoMAP™ CHIRP chartplotter/sonar combo.This adapter cable allows the echoMAP CHIRP to continue to display water depth from the in-hull transducer in instances when the transom mount transducer loses depth reading due to cavitation.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 10"L WT: 0.2 lbs UPC: 753759153014

Read more less

xSonic Pigtail Wiring Block AdapterConnect transducer with NO connector to echo sounder requiring a 9-Pin connector. Specifications: Type: Adapters Box Dimensions: 4"H x 6"W x 8"L WT: 1.2 lbs UPC: 9420024154618

Read more less

Replacement Transom Mount Transducer BracketThis replacement bracket kit has everything you need to mount your transducer on the transom of your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 7"L WT: 0.25 lbs

Read more less

Adapter cable, 7 pin BLUE to bare wires Specifications: Type: Adapters Box Dimensions: 2"H x 4"W x 7"L WT: 0.3 lbs UPC: 042194535111

Read more less

Forward-Facing Motorized Sonar MountThe FORESIGHT Forward-Facing Sonar Mount is the most sophisticated mounting system on the market. It allows the sonar transducer to stow and deploy with the bow-mount trolling motor but still be controlled independently.*The FORESIGHT was designed to be used with a 0-degree transducer mounting bracket. The use of perspective mounts and other add-ons that move the transducer further away from the Foresight shaft may cause the transducer to contact the trolling motor.Features:The wireless foot pedal is includedSpecifications: Weight: 12 lbs. Dimensions: 39 × 10 × 5 inches Fit kit: Lowrance Ghost, Garmin Force, and Minn Kota Ultrex (Kits not included) Specifications: Type: Mounting Brackets Box Dimensions: 5"H x 10"W x 39"L WT: 11.5 lbs UPC: 854127007912

Read more less

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164 SS164 B175C SS164 Specifications: Type: Tools Box Dimensions: 1"H x 6"W x 7"L WT: 0.95 lbs

Read more less

Transom Mount Bracket for HV-100Raymarine Transom Mount Bracket specifically for Raymairne's HV-100. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 8"W x 9"L WT: 0.6 lbs UPC: 723193824610

Read more less

9 M SILR Y Dual Side Image Transducer Adapter Cable f/HELIX Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transducer switch.  Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transducer switch.  Used in applications where the a plastic thru the hull transducer is required on a boat with a deep V hull or the motor or other items on the transom of the boat may block one side of the transducer and distort readings.    30" length. Supports MEGA Side Imaging. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 2"H x 7"W x 9"L WT: 0.4 lbs UPC: 082324052378

Read more less

Heavy-Duty Transom Mount Bracket w/Spray ShieldMount the transducer on the transom of your boat so it remains in the water at all times to provide excellent sonar returns.  Bracket can be adjusted to allow the angle of the transducer to be parallel with the water surface.The spray shield blocks excessive water from spraying off the transducer when the boat is running at high speeds.  Creates minimal drag on the boat.Compatible with: 4-Pin, 8-Pin or 12-Pin scanning transducersWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 3"W x 7"L WT: 0.4 lbs UPC: 753759171636

Read more less

Foulfree Transducer Coating Formulated by industry-leading scientists and certified by Airmar for transducers.   Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns and positive fish targets.  It can also increase the turbulence over the face of the transducer causing aeration and loss of bottom contact.  Foulfree keeps transducers clean and operating at the top of their game for the clearest sonar images possible.  The proprietary clear coat forms a slick surface that marine growth can’t grab onto, keeping your transducer surface clean and clear. Features: Foulfree™ is simple to apply and lasts for 12-24 months Transducer safe - Airmar certifies that Foulfree™ coating on its transducers results in no loss in transducer performance Biocide Free - Foul-release, not antifoul.  Foul-release coatings use physical means to reduce fouling, creating a surface that’s tough for marine organisms to adhere to Easy to apply A foul-free transducer equals more clarity, detail, and visibility below the waterline. Technical Specifications: Coverage Rate - 1ft² (two (2) average size transducers) In the Box: Abrasive pad XDclean wipe XDprime, wipe Applicator brush Foulfree Clear coat - 15ml *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Service Kits Box Dimensions: 2"H x 2"W x 5"L WT: 0.15 lbs UPC: 9421903335425 Quick Guide (pdf)

Read more less

9-Pin Black to 7-Pin Blue Adapter Cable for Non-CHIRP TransducersConnects a non-CHIRP transducer with a 9-pin black connector to the older 7-pin blue sockets on displays and echosounder modules. For use with transducers that have an analog temperature sensor.

Read more less

FCV800 Y-Cable f/Multi-Channel CHIRP Transducer Specifications: 12-Pin to 2 10-Pin Specifically for FCV800 For dual channel CHIRP transducer Y-cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

0 Degree Pole Mount f/Livescope Plus LVS34Position your LiveScope™ Plus LVS34 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too).

Read more less

75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 4"H x 5"W x 7"L WT: 0.85 lbs

Read more less

Extension Cable with XID - 12-Pin - 30'Extend the cable length of your compatible 12-pin transducer with this 30 foot (9 meter) cable. Supports 12-pin Airmar transducer with XID.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 2"H x 6"W x 8"L WT: 1.4 lbs UPC: 753759142834

Read more less

0 Degree Livescope Pole MountPosition your Panoptix LiveScope™ LVS32 transducer on this 0 degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too).

Read more less

Transducer Spray ShieldGarmin's transducer spray shield is available for Garmin side scanning transducers.Mounting hardware included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 3"W x 7"L WT: 0.2 lbs UPC: 753759148256

Read more less

ActiveTarget™ Forward/Down Mounting KitAttach an ActiveTarget transducer to your trolling motor with the Trolling Motor Forward/Down Mount for Forward and Down views at the trolling motor.

Read more less

Trolling Motor Barrel Mount f/Livescope Plus LVS34 Mount a compatible LiveScope™ transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and fits all barrel diameters, including those on popular Minn Kota® and MotorGuide® trolling motors. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 5"W x 5"L WT: 0.4 lbs UPC: 753759298487

Read more less

MHX-HW MEGA Imaging Metal Transom Mount Bracket MEGA Imaging+ Metal Mounting Bracket allows adjustment of transducer angle. Durable, rugged metal construction ideal for transom-mount installations. Compatible Transducers: XM 9 HW MSI T, XM 9 HW MDI T, XM 9 20 MSI T, XM 14 HW MDI T, XM 14 HW MSI T, XM 14 20 MSI T, XM 14 74 MSI T Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 8"W x 9"L WT: 0.9 lbs UPC: 082324053818

Read more less

Extension Cable with XID - 12-Pin - 10'Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 1"H x 8"W x 8"L WT: 0.5 lbs UPC: 753759142827

Read more less

Bare Wire Transducer to 12-Pin Sounder Wire Block AdapterConnect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter.Compatible Devices: GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv & 7616xsv GSD™ 25 Premium Sonar Module WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 7"L WT: 0.8 lbs UPC: 753759142810

Read more less

AD-MTM-HW-MDI MEGA DI+ Trolling Motor Adapter Bracket MEGA DI+ Trolling Motor Transducer Adapter Bracket converts a MEGA Down Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling motor for a low profile fit. Features: Compatible Transducers: XM 9 HW MDI T, XTM 9 HW MDI T, XM 14 HW MDI T, XTM 14 HW MDI T Compatible Fish Finders: HELIX 9 CHIRP MEGA DI+ GPS G3N, HELIX 10 CHIRP MEGA DI+ GPS G3N, HELIX 12 CHIRP MEGA DI+ GPS G3N, SOLIX 10 G2 – All Models, SOLIX 12 G2 – All Models, SOLIX 15 G2 – All Models Specifications: Type: Adapters Box Dimensions: 3"H x 8"W x 9"L WT: 0.8 lbs UPC: 082324053795

Read more less

9 M SIDB Y - 9-Pin Side Imaging Dual Beam Splitter CableY Cable - Side Imaging and Dual Beam - allows you to use two transducers on one unit without the use of a transducer switch. For use with Side Imaging products only, in conjunction with a dual beam transducer only.  For improved high speed performance for bottom tracking. 30" length.Supports MEGA Side Imaging.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 2"H x 7"W x 9"L WT: 0.4 lbs UPC: 082324052354

Read more less

Transducer Support Arm The transducer support arm fits over the Vexilar rod holder.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 2"H x 4"W x 4"L WT: 0.1 lbs UPC: 052762116000

Read more less

8-Pin Transducer Extension Cable - 30'Connect your transducer to your sonar device with this 30'(9M) 8-pin extension cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 1"H x 8"W x 8"L WT: 1.4 lbs UPC: 753759128838

Read more less

4-Pin Transducer to 12-Pin Sounder Adapter CableConnect a 4-pin transducer to a 12-pin sonar port on your compatible marine device with this adapter cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 1"H x 5"W x 7"L WT: 0.3 lbs UPC: 753759197490

Read more less

Panoptix LiveScope™ Transducer Extension Cable - 10' - 21-PinExtend the cable length of your compatible Panoptix™ transducer with this 10 ft (3 m) cable.Compatible Devices: Panoptix LiveScope™ System Panoptix™ LVS32 Transducer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 2"H x 6"W x 7"L WT: 0.95 lbs UPC: 753759220594

Read more less

Flat Mount Bracket f/StructureScan 3D Ducer & TotalScan Ducer3D Transducer Flush Mount Bracket is used to flush mount the transducer under the boats Hull. Suits TotalScan and 3D Transom Transducers Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 6"W x 12"L WT: 0.7 lbs UPC: 9420024145944

Read more less

8-Pin Female to Wire Block AdapterGarmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8-pin connection.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 7"L WT: 0.8 lbs UPC: 753759976286 Owner's Manual (pdf)

Read more less

1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Garmin units.

Read more less

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 4"H x 5"W x 6"L WT: 0.8 lbs

Read more less

Trolling Motor Mount f/GT36 and GT56 Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting.

Read more less

1M Adapter Cable with Male 9-Pin Navico Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Navico units.

Read more less

RealVision 3D Transducer Extension Cable - 3M (10')RealVision 3D Transducer Extension Cables work with both the transom-mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end and a compatible socket at the transducer end.  For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run. Specifications: Type: Extension Box Dimensions: 2"H x 10"W x 10"L WT: 1 lbs UPC: 723193817070

Read more less

RV-100 RealVision 3D Transom Bracket KitThis transom mount transducer service kit includes all of the spare parts and accessories originally included with the RV-100 transducer. The bracket kit includes the stainless steel transom bracket and mounting screws, kick-up pivot hardware, transducer carrier bracket and the carrier mounting bolt. *The RV-100 transducer and cable is not included. Specifications: Type: Misc Box Dimensions: 2"H x 9"W x 12"L WT: 1.1 lbs UPC: 723193817285

Read more less

50/200kHz Skimmer Transducer Mounting KitFeatures: 50/200kHz Skimmer transducer mounting kit Heavy duty plastic mounting bracket Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 8"W x 9"L WT: 0.5 lbs UPC: 042194536064

Read more less

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.The short pigtail attached to the transducer ends in an Airmar 5-pin female connector. The adapter cables have a matching Airmar 5-pin male connector (shown below) at one end and the correct connector for a specific brand of electronics at the other end.Both parts are needed for installation. If the user changes equipment brand at some later time, the transducer can be left in place and the adapter cable replaced.Mix and Match 600W transducers include the B117, B45, B60, P319, P66*, P79, SS505, and SS60. (* not all models)A 12m (40') extension cable (part MM-5P-5P) is available with one male and one female 5-pin connector.Note that 600W Mix and Match cables cannot be used with 1kw transducers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 7"L WT: 1 lbs UPC: 801769003048

Read more less

TripleShot™ HD T/M Bracket for Eagle Eye™Transom mount bracket for Eagle TripleShot HD Transducer.

Read more less

MEGA Live 2 Transom Mount BracketThe MEGA Live 2 Transom Mount expands the versatility of MEGA Live 2, allowing anglers to install the transducer on the back of the boat, like traditional 2D, Down Imaging, and Side Imaging transom mount sonar. It’s ideal for multispecies and center console boats and supports a wide range of fishing styles, including trolling, vertical jigging, and bottom fishing.Features: Attach your MEGA Live 2 transducer to the transom of your boat Use MEGA Live 2 without having to deploy the transducer Stainless steel for increased durability Not recommended for use at high speed Compatible with: MEGA Live 2 Forward-Facing Sonar Warranty: 1 Year

Read more less

Transducer Mounting PlateFeatures: Marine-grade polymer plate will not warp or corrode Premium materials; unaffected by UV rays Mounts easily with only 2 screws All hardware included Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 4"W x 12"L WT: 1 lbs UPC: 022697941107

Read more less

9-Pin Black to 7-Pin Blue Adapter Cable f/XID TransducersThe 9-to-7-Pin Transducer Adapter enables xSonic 9-pin transducers to connect to legacy 7-pin displays.Use with Airmar Chirp transducers Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 8"L WT: 0.5 lbs UPC: 9420024165355

Read more less

HDI Trolling Motor XDCR Adapter CupFor using HDI 83/200 and 455/800 kHz XDCR on a trolling motor Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 8"L WT: 0.2 lbs UPC: 9420024121924

Read more less

Extension Cable for HOOK² TripleShot/SplitShot Transducer - 10'10' extension cable for connecting TripleShot/SplitShot Transducers to HOOK² Specifications: Type: Extension Box Dimensions: 2"H x 6"W x 10"L WT: 0.55 lbs UPC: 9420024171813

Read more less

MHX MXNT Transom Mount Hardware f/MEGA TransducerStainless Steel mounting hardware for the XNT transom mount transducers.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 7"W x 9"L WT: 0.3 lbs UPC: 082324050435

Read more less

Attaches transducer to a trolling motor.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 4"W x 9"L WT: 0.25 lbs UPC: 042194535944

Read more less

Trolling Motor BracketTrolling Motor Bracket specifically designed for the Dragonfly CPT-DV and CPT-DVS transom mount transducers. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 6"W x 8"L WT: 0.2 lbs UPC: 723193796177

Read more less