10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use brand-specific connectors.Gemeco has introduced a new line of in-line splices that can be used to connect CHIRP transducers to the correct connector for a given application. These splices are available in two models, one for wires with up to 6 conductors and one for wires with up to 10 conductors. Both models have waterproof gland fittings rated to IP67. A 1.3mm hex-head wrench is included. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Misc Box Dimensions: 1"H x 1"W x 5"L WT: 0.2 lbs

Read more less

8-Pin Trnasducer Extension Cable- 10'Connect your transducer to your sonar device with this 10'(3M) 8-pin extension cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 1"H x 6"W x 8"L WT: 0.5 lbs UPC: 753759128814

Read more less

Garmin 12-Pin Mix & Match Cable for Chirp TransducersAirmar's Garmin Mix & Match CableFeatures: 12-Pin Specifically for Chirp Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 1"H x 4"W x 4"L WT: 0.2 lbs UPC: 801769003239

Read more less

Replacement Transducer Bracket for Plastic Transom Mount Transducer with Depth & TempThis replacement Transducer Bracket is for the plastic transom mount that can be used to replace the dual frequency transducers included with many Garmin units.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 2"W x 4"L WT: 0.3 lbs

Read more less

Trolling Motor Shaft Mount for Panoptix™ LVS32Mount a compatible Panoptix transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, including those on popular Minn Kota® and MotorGuide® trolling motors. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 6"W x 7"L WT: 0.3 lbs UPC: 753759207823

Read more less

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 9"L WT: 0.55 lbs

Read more less

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 9"L WT: 0.65 lbs

Read more less

75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75WR-2 or 75WR-3 for the hull nut.For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 10"L WT: 0.6 lbs

Read more less

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 4"W x 9"L WT: 0.5 lbs

Read more less

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164 SS164 B175C SS164 Specifications: Type: Tools Box Dimensions: 1"H x 6"W x 7"L WT: 0.95 lbs

Read more less

Transducer Adapter Cable f/P72, P79, GT15 & GT30 for echoMAP™ CHIRPConnect a Garmin GT30 transom mount scanning transducer and a Garmin GT15M-IH, Airmar P72 or Airmar P79 in-hull mount traditional transducer to a compatible echoMAP™ CHIRP chartplotter/sonar combo.This adapter cable allows the echoMAP CHIRP to continue to display water depth from the in-hull transducer in instances when the transom mount transducer loses depth reading due to cavitation.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 10"L WT: 0.2 lbs UPC: 753759153014

Read more less

FCV800 Y-Cable f/Multi-Channel CHIRP Transducer Specifications: 12-Pin to 2 10-Pin Specifically for FCV800 For dual channel CHIRP transducer Y-cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

RealVision 3D Transducer Extension Cable - 3M (10')RealVision 3D Transducer Extension Cables work with both the transom-mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end and a compatible socket at the transducer end.  For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run. Specifications: Type: Extension Box Dimensions: 2"H x 10"W x 10"L WT: 1 lbs UPC: 723193817070

Read more less

MHX-ICE Ice Flasher Transducer Mounting Hardware The MHX ICE is a kit that provides the float and stopper for XI 9 19 and XI 9 20 ICE transducers. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 7"W x 9"L WT: 0.35 lbs UPC: 082324508196

Read more less

Mounting hardware for the XNT transom mount transducers. Includes a kick up bracket.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 8"W x 9"L WT: 0.45 lbs UPC: 082324507779 Owner's Manual (pdf)

Read more less

50/200kHz Skimmer Transducer Mounting KitFeatures: 50/200kHz Skimmer transducer mounting kit Heavy duty plastic mounting bracket Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 8"W x 9"L WT: 0.5 lbs UPC: 042194536064

Read more less

0 Degree Pole Mount f/Livescope Plus LVS34Position your LiveScope™ Plus LVS34 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too).

Read more less

A80328 Adapter CableProduct Compatibility: Single B75/B175 Operation Cable Specifications: Type: Adapters Box Dimensions: 2"H x 9"W x 12"L WT: 0.4 lbs UPC: 723193796351

Read more less

75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 4"H x 5"W x 7"L WT: 0.85 lbs

Read more less

Humminbird 14-Pin Mix & Match Chirp Cable - 1MAirmar's 14-Pin Mix & Match Chirp Cable for HumminbirdFeatures: Length: 1M 14-Pin Specifically for Humminbird This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 2"H x 5"W x 5"L WT: 0.2 lbs UPC: 801769003284

Read more less

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is run up through the boat to the equipment location. The short adapter cable connects to the transducer cable at one end and to the equipment at the other end.Both parts are needed for an installation. If the user changes equipment brand at some later time, the transducer and its attached cable can be left in place and only the adapter cable needs to be replaced.Note that CHIRP Mix and Match cables cannot be used with conventional 50/200kHz transducers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 4"H x 5"W x 6"L WT: 0.8 lbs

Read more less

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: SS60 B60 Specifications: Type: Tools Box Dimensions: 1"H x 4"W x 5"L WT: 0.5 lbs

Read more less

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with: B164 B175 SS164 SS264 IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4". If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16". Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 10"L WT: 0.6 lbs

Read more less

With rugged, durable construction, this kit fits transducers of all major manufacturers, and allows mounting on the lower unit of bow- or transom-mount trolling motors.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 8"W x 9"L WT: 0.5 lbs UPC: 029402007691

Read more less

10-Pin to 12-Pin Adapter Cable (0.4m) for TZT3Features: 10-Pin to 12-Pin ends Length: 0.4m Used specifically for Furuno's TZT3 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

12-Pin XDR Extension Cable - 10MFeatures: Extension Cable For Furuno Transducer 10M (33' Length) 12-Pin Color: Black This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

MHX-HW MEGA Imaging Metal Transom Mount Bracket MEGA Imaging+ Metal Mounting Bracket allows adjustment of transducer angle. Durable, rugged metal construction ideal for transom-mount installations. Compatible Transducers: XM 9 HW MSI T, XM 9 HW MDI T, XM 9 20 MSI T, XM 14 HW MDI T, XM 14 HW MSI T, XM 14 20 MSI T, XM 14 74 MSI T Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 8"W x 9"L WT: 0.9 lbs UPC: 082324053818

Read more less

Trolling Motor Barrel Mount for Panoptix™ LVS32Mount a compatible Panoptix transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and fits all barrel diameters, including those on popular Minn Kota® and MotorGuide® trolling motors.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 7"W x 7"L WT: 0.25 lbs UPC: 753759207816

Read more less

4-Pin Transducer to 8-Pin Sonar PortConnect a 4-pin transducer to an 8-pin sonar port on your compatible marine device with this adapter cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs UPC: 753759197810

Read more less

Replacement Top Mount f/HDI 83/200/455/800 TMReplacement mount for Skimmer and top housing Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 4"W x 7"L WT: 0.2 lbs UPC: 421945359518

Read more less

MM-HB Mix & Match™ Cable 5-Pin 600W Series with Humminbird #9 Connector - 9MSpecifications: Sensor Connector: MM Display Connector: HB Mix and Match Series: 5-Pin 600 Watt Country of Origin: USA Cable-Length: 9 m (30')

Read more less

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.The short pigtail attached to the transducer ends in an Airmar 5-pin female connector. The adapter cables have a matching Airmar 5-pin male connector (shown below) at one end and the correct connector for a specific brand of electronics at the other end.Both parts are needed for installation. If the user changes equipment brand at some later time, the transducer can be left in place and the adapter cable replaced.Mix and Match 600W transducers include the B117, B45, B60, P319, P66*, P79, SS505, and SS60. (* not all models)A 12m (40') extension cable (part MM-5P-5P) is available with one male and one female 5-pin connector.Note that 600W Mix and Match cables cannot be used with 1kw transducers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Deadrise Angle Finder - Accuracy of ± 1/2°Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles.Features: Quickly measures boat hull deadrise angle. Ball Bearing construction for accuracy. Attach to straight edge or framing square Handy angle and grade chart on back of unit Specifications: Type: Tools Box Dimensions: 2"H x 5"W x 8"L WT: 0.5 lbs UPC: 038987110061

Read more less

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164 SS164 B175C SS264 Specifications: Type: Tools Box Dimensions: 5"H x 6"W x 7"L WT: 1.1 lbs

Read more less

Panoptix LiveScope™ Transducer Extension Cable - 10' - 21-PinExtend the cable length of your compatible Panoptix™ transducer with this 10 ft (3 m) cable.Compatible Devices: Panoptix LiveScope™ System Panoptix™ LVS32 Transducer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 2"H x 6"W x 7"L WT: 0.95 lbs UPC: 753759220594

Read more less

7-Pin Transducer Adapter Cable to HOOK²This adapter cable will adapt any Navico 7-pin tranducer to a HOOK2 unit. Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbs UPC: 9420024166956

Read more less

Eagle Eye Trolling Motor MountThe Lowrance Eagle Eye Transducer Trolling Motor Mount is used to mount Eagle Eye transducers to a trolling motor.

Read more less

Extension Cable For LSS-1 or LSS-2 TransducerFor use specifically with Lowrance's LSS-1 or LSS-2 Transducer. If the 20' transducer cable is not long enough, the 10' extension cable is available. Specifications: Type: Extension Box Dimensions: 4"H x 4"W x 9"L WT: 0.9 lbs UPC: 042194534794

Read more less

TripleShot™ HD T/M Bracket for Eagle Eye™Transom mount bracket for Eagle TripleShot HD Transducer.

Read more less

Replacement Transom Mount Transducer BracketThis replacement bracket kit has everything you need to mount your transducer on the transom of your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 7"L WT: 0.25 lbs

Read more less

12-Pin Pigtail Cable for TZT3Furuno's 12-Pin Pigtail Cable specifically for TZT3.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

MEGA Live 2 Transom Mount BracketThe MEGA Live 2 Transom Mount expands the versatility of MEGA Live 2, allowing anglers to install the transducer on the back of the boat, like traditional 2D, Down Imaging, and Side Imaging transom mount sonar. It’s ideal for multispecies and center console boats and supports a wide range of fishing styles, including trolling, vertical jigging, and bottom fishing.Features: Attach your MEGA Live 2 transducer to the transom of your boat Use MEGA Live 2 without having to deploy the transducer Stainless steel for increased durability Not recommended for use at high speed Compatible with: MEGA Live 2 Forward-Facing Sonar Warranty: 1 Year

Read more less

XSONIC Transducer Adapter Cable to HOOK²Adapter cable to connect XSONIC Transducer to HOOK² Specifications: Type: Adapters Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 9420024166963

Read more less

Kayak Scupper Transducer MountLowrance's transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmer transducers, both 83/200 kHz and 455/800 kHz DownScan Imaging (DSI) models alike, as well as earlier 1-inch 200 kHz transducers.It's easy to install in most any scupper opening, with few tools, and without messy adhesives as with shoot-thru-hull transducer mountings.Best of all, the Lowrance Scupper Mount positions the Skimmer transducer, so it's totally submerged in the water you're fishing. That guarantees maximum sonar signal return sensitivity, producing the absolute clearest underwater returns of structure and fish possible. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 2"W x 11"L WT: 0.2 lbs UPC: 9420024114704

Read more less

MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 5-pin male connector. The adapter cables have a matching Airmar 5-pin female connector at one end and the correct connector for a specific electronics brand at the other end.Both parts are needed for installation. If the user changes equipment brand later, the transducer can be left in place and the adapter cable replaced.*600W Mix and Match cables cannot be used with 1kw transducers or CHIRP transducers.Features: Connector: 9-pin, Depth only Fits: HDS Carbon, evo 3 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Forward-Facing Motorized Sonar MountThe FORESIGHT Forward-Facing Sonar Mount is the most sophisticated mounting system on the market. It allows the sonar transducer to stow and deploy with the bow-mount trolling motor but still be controlled independently.*The FORESIGHT was designed to be used with a 0-degree transducer mounting bracket. The use of perspective mounts and other add-ons that move the transducer further away from the Foresight shaft may cause the transducer to contact the trolling motor.Features:The wireless foot pedal is includedSpecifications: Weight: 12 lbs. Dimensions: 39 × 10 × 5 inches Fit kit: Lowrance Ghost, Garmin Force, and Minn Kota Ultrex (Kits not included)

Read more less

TotalScan/StructureScan 3D Replacement BracketReplacement bracket for TotalScan & StructureScan 3D Transom Mount TransducersHardware included Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 5"W x 13"L WT: 0.8 lbs UPC: 9420024157183

Read more less