B75HW High Wide Tilted Element Chirp Transducer - 20 Degree Deadrise, 600W Thru HullRequires Mix and Match Cable for the appropriate Fishfinder it will be connected to.Airmar’s low-profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The B75HW combines the benefits of the high-frequency band for amazing target separation on baitfish and schooling gamefish, with a wide 30° beamwidth for maximum coverage under the boat. The B75H transducer delivers up to 100 kHz of total bandwidth in just one installation and delivers amazing coverage under the boat in depths to 106 meters (350').B75HW transmits across the following bandwidth: High frequency 150 to 250 kHzThe transducer is installed almost flush to the hull. The tilt of the element corrects for the hull deadrise by orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings. Fixed 20° tilted version for 16° to 24° hull deadriseFeatures:  Depth and fast-response water-temperature sensor 600 W with a maximum depth performance of 106 m (350') High frequency: 150 to 250 kHz 30° beamwidth High frequency delivers great shallow-water performance, bottom detail, and clear fish-target returns Low-profile, thru-hull housing provides good resolution at speed when installed properly Bronze housing for use on stepped, planing, or displacement hull Exclusive Xducer ID® technology Fixed 20° tilted version for 16° to 24° hull deadrise Hole Size: 70 mm (2-13/16") CHIRP-Ready Single-Band This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 30' Chirp: High Wide Imaging: Standard Mounting Style: Thru-Hull Pins: 12 Speed Included: No Temperature: Yes Box Dimensions: 5"H x 8"W x 12"L WT: 5.9 lbs UPC: 801769018141

Read more less

TM275LHW Transom Mount CHIRP Transducer with Temp - 12-Pin Connector for TZT3The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the transom mounted TM275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the TM275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.The TM275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.Features: Plastic Transom Mount CHIRP Transducer with Temp Low Freq: 42-65 kHz High Freq: 150-250 kHz This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Blanking Plug f/SeaTalk ngThis blanking plug is a blanking plug for the SeaTalkng. Place blanking plug in unused SeaTalkNG Spur sockets to protect them.

Read more less

HALO20+ 20" Radar with 5M CableSee Far And Near With One Compact DomePerfect for a wide mid-sized to large sailboats, HALO20+ comes in a compact 20-inch dome antenna and delivers high-quality short, mid and long-range detection. Monitor two distance ranges at once in Dual Range mode so you can keep an eye on far away weather cells while watching for collision hazards up close. HALO20+ radar’s pulse compression technology means no compromises in detection at either selected range, while beam sharpening provides enhanced separation between small or distant targets.The Best View To Avoid CollisionHALO20+ radar does a full 360 degree sweep every second, thanks to its industry-first 60 RPM rotation at ranges up to 1.5 nautical miles. These ultra-fast updates give you an almost real-time view at close range, offering the ultimate view for collision avoidance of fast moving targets.  Built-in VelocityTrack™ Doppler TechnologyVelocityTrack™ technology grands instant visual feedback on whether targets are coming towards you or moving away with colour-coding approaching vessels for high visibility while de-emphasizing diverging targets, increasing situational awareness and decreasing the risk of collision. HALO20+ radar automatically checks every target in range; there’s no need to manually select individual targets, and no limit to the number of targets on screen at one time.Ready Whenever You AreHALO20+ Radar wakes instantly from its low-power standby mode, delivering this high-speed radar coverage exactly where and when you require it. Even if your HALO20+ Radar is completely powered down, start-up only takes some seconds, not minutes like traditional pulse radar.Easy to Use RadarHarbour, offshore, weather and custom modes tune HALO20+ Radar’s advanced signal processing to help ensure that targets can be seen vividly – even in the toughest environmental conditions.Features: 36 nm range from a compact 20-inch dome Advanced pulse compression technology with beam sharpening Simultaneous Dual Range operation sees both far and near Ultra-fast 60 RPM operation at ranges up to 1.5 nm VelocityTrack™ Doppler technology to avoid collision Easy operation with harbour, offshore, weather and custom modes MARPA target tracking (up to 10 targets, 20 in dual range) Ready instantly from standby Low power consumption Included: 20" dome 5m cable (000-14547-001) Ethernet Adapter Cable (000-14552-001) Specifications: Range - Max (Miles): 36nm Power - Output: 25W Array Size (Inches): 20" Box Dimensions: 11"H x 23"W x 26"L WT: 23 lbs UPC: 9420024173848

Read more less

Kayaker CompassFeatures:  2-3/4" Easy to Read Dial Adjustable up to 45 degrees Easily Installed, Fits 2.94" (7.46 cm) Mounting Hole Built-in Compensators to Easily Adjust for Deviation Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement Powerful DirectiveForce Magnets for Fast Heading Lock-on High Temperature Composite Construction for Extended Operating Range 100% Repairable Exclusive 5-Year Ritchie Warranty Specifications: Read: Front Lubber Lines: Yes Backlight: No Mounting Style: Bulkhead Box Dimensions: 5"H x 6"W x 6"L WT: 0.96 lbs UPC: 010342161185 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

NMEA 2000 field installable connector - maleWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male Data Interface: NMEA 2000 Box Dimensions: 1"H x 1"W x 1"L WT: 0.09 lbs UPC: 753759078362

Read more less

Micro-C Female to SimNet Cable Simrad's Micro-C Female to SimNet 1M Cable Specifications: Type: Cables Box Dimensions: 1"H x 6"W x 6"L WT: 0.13 lbs UPC: 809190312579

Read more less

1050nm Compact Helmet-Mounted IlluminatorSIONYX’s groundbreaking sensor technology detects out-of-band illuminators and lasers up to 1200nm, surpassing the limitations of traditional night vision systems. Add a SIONYX 1050nm illuminator to your kit to remain undetectable to traditional night vision devices while maintaining clear vision of your targets.Crafted from hard-anodized aircraft-grade aluminum, the compact 1050nm helmet-mounted illuminator is built to withstand the toughest conditions. With an IP67 water and dust-proof rating, along with a built-in quick-disconnect MILSTD-1913 Picatinny rail for hands-free use, it will light up your field of view with the flip of a switch.Enjoy up to 2 hours of uninterrupted operation on a single CR123 battery, ensuring you're always prepared for the task at hand. From moonless starlight to complete darkness, the SIONYX 1050nm helmet illuminator bridges the gap, providing unmatched visibility when you need it most. (Batteries not included)Experience unparalleled night vision capabilities with SIONYX. This is a SIONYX official accessory. Quick Guide (pdf)

Read more less

HDS PRO 9 - with Preloaded C-MAP DISCOVER OnBoard & Active Imaging HD TransducerSee more and catch more with the HDS PRO 9 fishfinder/chartplotter. Watch fish react to your lure live with support for high-resolution ActiveTarget® 2 Live Sonar, and find fish and holding structure with ultra-high-definition Active Imaging™ HD Transducer. Quickly locate prime fishing areas with preloaded C-MAP® DISCOVER OnBoard charts and get full fishing system networking with expanded boat control from bow to stern.In the box: HDS PRO fishfinder/chartplotter (9-inch display screen) C-MAP DISCOVER OnBoard (Preloaded in HDS PRO fishfinder/chartplotter) Lowrance Active Imaging HD 3-in-1 Transducer (part number: 000-16062-001) Features (Lowrance Active Imaging HD 3-in-1 Transducer): High definition (up to 1.2MHz) SideScan and DownScan Imaging™ deliver the clearest images of fish and structure Lowrance® CHIRP with superb clarity and target separation FishReveal™ DownScan view makes fish identification easy Supports Medium and High CHIRP (83/200kHz) + 455/800kHz and 455/1.2MHz frequencies Smart transducer design boosts signal clarity Compatible directly with Lowrance HDS PRO or with an S3100 module with HDS LIVE, HDS Carbon, and Elite FS Features: Preloaded C-MAP DISCOVER OnBoard charts with 1-foot contours on 19,000+ US Lakes, 9,400+ Canadian Lakes SolarMAX™ HD Touchscreen viewable at extreme angles and through polarized lenses High-definition Active Imaging™ HD ready (Lowrance CHIRP/SideScan/DownScan Imaging™) High-resolution ActiveTarget 2 Live Sonar ready  FishReveal™ with SideScan view, as well as Downscan (*Requires S3100 and compatible transducer) Real-time mapping is available with C-MAP Genesis Live. Support for ActiveTarget Scout and Ghost Trolling Motor 360 chart overlay views Large programmable keys Touchscreen control of Power-Pole anchors, Ghost Trolling Motor, Autopilot, and Lowrance Outboard Pilot NMEA 2000, wireless and bluetooth, connectivity – plus smartphone notifications Display: Backlight Color: Pure white LED Display Resolution: 1280 x 720 Viewing Angles: 80° top/bottom, 80° left/right Connectivity: Bluetooth: Integrated Bluetooth 4.0 with support for Bluetooth Classic Ethernet Ports: 2 x 100 Mbit, 6 max MFD's on a network Connectivity WiFi: Internal 802.11b/g/n and compatible with WiFi-1 Module NMEA 2000 Connectivity: 1x Micro-C SD Card Storage: 2 micro SD cards up to 32GB Electrical: Power Consumption Max: 2.9A @ 13.8VDC with Full Backlight, Sonar on Power Consumption Minimum: 2.0A @ 13VDC with Full Backlight, Sonar on Power Consumption Typical: 2.0A @ 13VDC with Full Backlight, Sonar on Recommended Fuse Rating: 3A Supply Voltage: 12 v DC (10.8-17VDC) Environment: Operating Temperature Range: 5°F to 131°F (-15°C to 55°C ) Storage Temperature Range: 4°F to 140°F (-20°C to 60°C )  GPS: GPS Receiver Channels: 16 Update rate: 10 Hz MFD (Multi-Function Display): Cartography included: C-MAP Discover OnBoard (AMER models), C-MAP World Background (ROW models), Navionics basemap (AMER and ROW models) Internal Storage: 8.0 GB Internal Waypoints, Routes, Tracks: 3000 Waypoints, 100 Routes, and 100 Trails with up to 10,000 points per trail Specifications: Cartography Brand: C-Map Included Transducer: 000-16062-001 Screen Size: 9" Touchscreen: Yes Transducer Included: Yes Box Dimensions: 6"H x 13"W x 16"L WT: 10.1 lbs UPC: 9420064129614 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Autopilot Pump Type 2 - Adjustable Reversing Pump - 12V up to 18 CI CylinderNow with ORB Port Connection manifoldReversing pumps are used when hydraulic steering is fitted on boats up to 65 feet L.O.A. (depending on rudder torque). The pumps are switched on by the automatic pilot and make a steering correction to left or right determined by the direction of rotation of the pump motor. The motors are of the permanent magnetic type and reversing direction is accomplished by reversing the motor input current.The pump has only three moving parts and requires no complicated check valves to prevent rudder movement when de-energized. Output flow is completely adjustable to 50% of rated flow allowing the pump output to be adjusted precisely to the volume of steering cylinder fitted. The pump is exceptionally reliable and delivers more than twice the hydraulic output per watt of input than gear pumps manufactured by competitors.Motors are heavy duty, a full 85mm in diameter with long brushes and sealed ball bearings for long service life. The molded rubber mounting foot can be rotated to allow the pump to be mounted on any surface.A useful range of accessories can be used to enhance the pump by incorporating added valves and solid state FET switching. The valves mount directly to the pump body. The FET switch mounts adjacent to the pump. No other autopilot pump made offers such advantages.Benefits of the Octopus Reversing PumpsPiston pump technology giving higher efficiency and accuracy Fewer moving parts giving increased reliability Variable flow rate to make sure the pump is matched as accurately as possible to the manual steering system Professional cut off valves for simple servicing.Features: Average Current 4-6 amps Max Current 19amps 12vDC Cylinder Size: 11-22ci Flow Rate(adjustable): 600cc - 1.2 litre/min Specifications: Type: Pumps/Drives Box Dimensions: 5"H x 6"W x 12"L WT: 8.35 lbs UPC: 628309272777

Read more less

Steering CableOC15109-98" Stroke x 9'f/use with Remote Drive Unit Specifications: Type: Parts Box Dimensions: 2"H x 21"W x 21"L WT: 5.9 lbs UPC: 628309128173

Read more less

HS75 Compass GNSSAccurate HeadingAn accurate heading sensor is essential for autopilot, advanced radar features, and many other onboard electronics. The multi-GNSS HS75 supports GPS, GLONASS, BeiDou, Galileo, and QZSS for pinpoint global positioning and heading accuracy. The commercial-grade HS75 offers heading accuracy to within 0.75 degrees: much greater than a common magnetic rate compass, without the cost and maintenance of a gyro compass.Unlike a standard GPS receiver, which can only estimate heading based on the movement of your boat, the HS75 provides an accurate heading even while your boat is stationary. Integrated gyro and tilt sensors offer enhanced performance and provide a temporary source of heading data during any loss of GPS signal.Fast and Accurate PositioningThe HS75’s high-speed GPS receiver calculates your position up to 20 times every second, perfect for fast-moving powerboats and equipment that relies on high-speed position updates. Quick startup means you won’t get caught waiting for a position fix before you can get underway. Support for satellite-based augmentation systems (SBAS) offers enhanced positional accuracy where available.Rate of Turn, Heave, Pitch, and RollThe HS75 also calculates your boat’s rate of turn, heave, pitch, and roll. The rate of turn is essential for optimal autopilot performance, while heave data is used by some sonar equipment to compensate for the effects of wave action. This additional data is output to compatible equipment over your boat’s NMEA 2000® network.Simple InstallationThe HS75 offers a plug-and-play installation, a small form factor, and high performance. The compass - measuring only 35 cm in length - mounts easily to a flat surface or pole.

Read more less

WS310 Wired Wind Sensor with 35M Cable with Interface CableThe WS310 wind sensor pack is the perfect solution for any sailor looking to get accurate and fast wind data to your instruments from a wired wind sensor.High PerformanceDesigned to provide highly accurate wind data in all conditions at all points of sail and heel.ReliabilityThousands of hours of real-life testing have proved this instrument to be exceptional in all conditions. Providing fast and accurate data at all times.Comes with:WS310 Wind Sensor - 000-14391-001WS310 (wired) Interface - 000-14389-001 WS300 35M (115') CABLE - 000-14397-001 Specifications: Instrument Function: Wind Screen Size: N/A Box Dimensions: 17"H x 17"W x 24"L WT: 8.3 lbs UPC: 9420024177068

Read more less

A2004 Autopilot Pack - A2004 Display, AC70 Course Computer, RF300 Feedback & Precision 9 CompassThe A2004 is a dedicated autopilot controller designed to meet the needs of professional mariners aboard a variety of commercial vessels. It features a proven Simrad interface, presented on a wide-angle and zero-fog colour display. Engineered for responsiveness and ease of use, the A2004 pairs a precision rotary control dial with dedicated buttons for instant access to steering modes, a custom-configurable Work mode, and automated turn patterns.Features: Proven Simrad interface designed for commercial marine applications Large, heavy-duty rotary control dial for precision steering Continuum steering technology Optically bonded 4.1" color display with 170° viewing angle Thruster integration & heavy-duty rudder feedback support Configurable work mode and low/high speed modes Automated turn patterns for fuel-efficient, hands-free manoeuvres No Drift steering holds course against wind and tide Flush or bracket mounting options Certified NMEA 2000® connectivity Dimensions 6.968 wide by 4.527 high Dimensions with Bracket 8.063 wide by 4.901 high Proven Simrad InterfaceThe A2004 builds upon the proven user interface and keypad layout of the Simrad AP70 and AP80 professional autopilot controllers, and delivers consistency with the latest generation of Simrad radar, sonar, and ECDIS displays.A large aluminium rotary control dial enables quick but precise steering adjustments, while dedicated keys offer instant access to steering modes, a custom-configurable Work mode, and automated turn patterns. All built-in controls are designed for ease of use with wet or gloved hands, in commercial settings such as fishing vessels and workboats. The A2004 also supports a wide range of Simrad autopilot remotes and steering levers.Continuum Steering TechnologyEvery Simrad steering innovation builds upon a legacy encompassing over sixty years of autopilot development, which continues to this day. This legacy is exemplified by the Continuum algorithm: the software behind Simrad steering technology. Continuum steering distils years of research and on-water testing into a flexible software solution, capable of delivering reliable auto-steering performance tuned specifically to match a vessel’s control characteristics. With a comprehensive range of hardware and interface modules, Simrad autopilot solutions can be tailored to suit a wide range of commercial vessels and applications.Optically Bonded 4.1-inch Color DisplayTo ensure optimal visibility in all conditions, the A2004’s colour LCD panel is optically bonded to its protective glass covering – eliminating the possibility of internal condensation. Transflective LCD technology makes use of reflected sunlight to brighten rather than obscure the screen, delivering superior day-time visibility and lower power consumption compared to traditional backlit displays. An ultra-wide 170 degree viewing angle means key autopilot information is clearly visible at a glance, from anywhere in sight of the display.Thruster Integration & Rudder Feedback SupportThe A2004 enables autopilot control of a single thruster via an optional AD80 or SD80 interface module. The thruster can be set to engage automatically below a user-defined speed threshold, and configured separately for normal and Work modes. The A2004 also supports specialized heavy-duty rudder feedback units designed for reliable operation aboard commercial vessels. Specifications: Steering Type: Hydraulic Box Dimensions: 10"H x 12"W x 17"L WT: 12 lbs UPC: 9420024162569 Owner's Manual (pdf)

Read more less

Ritchie N-203-C Compass Cover f/Navigator & SuperSport Compasses - WhiteProtective cover for Navigator and SuperSport compasses.For: DNP-200, DNB-200, DNW-200, FN-201, FNW-201, FN-203, FNW-203, SS-2000, and SS-2000WApprox. Shipping Weight: 1lb (454g)

Read more less

Protective Cover for STRIKER™/Vivid 5" UnitsUse our cover to protect your compatible STRIKER™ from the harsh marine environment when not in use. Specifications: Type: Covers Box Dimensions: 1"H x 4"W x 8"L WT: 0.4 lbs UPC: 753759275600

Read more less

Nitron XR1 Color Night Vision Camera - HDMI - BlackNavigate the Night with Brilliant HD ColorEnhance your nighttime adventures with the new Nitron XR1 Color Camera, the ultimate low-light navigation tool for boaters, anglers, and maritime professionals. Designed for seamless integration on any vessel, this cutting-edge camera delivers crystal-clear imagery in near-total darkness, ensuring you stay safe and in control—no matter the conditions.Maximize Your Night Vision Advantage!Unlock the full potential of the Nitron XR1 Camera by pairing it with one of our high-performance IR light bars. This powerful combination takes nighttime navigation to the next level, providing unmatched visibility in total darkness.With advanced IR technology, you can preserve your natural night vision while significantly enhancing the camera’s clarity, range, and performance. Navigate with greater confidence, detect obstacles with precision, and experience crystal-clear imaging even in the darkest environments. Upgrade your setup and own the night!Compact, Flush, and Built to LastThe sleek, low-profile design allows for multiple mounting options, ensuring a perfect fit on any boat.Full Color HD VideoOur advanced low-light sensor technology captures every detail in ultra-clear 1920 X 1080 color video, allowing you to navigate confidently without blinding spotlights or guesswork.Optimized Field of ViewWith a 42-degree field of view, the Nitron XR1 offers precise and focused visibility, allowing you to detect objects ahead with exceptional color and clarity.Built for the Harsh Marine Environment with a Sleek, Integrated DesignEngineered with an IP67 waterproof rating, the Nitron XR1 Camera withstands heavy rain, saltwater exposure, and extreme temperatures. Its rugged, corrosion-resistant housing ensures long-term durability in offshore and coastal environments.Features: Ultra Low-Light Sensor: Crystal clear color night vision 42 Degree Field of View: Focused and precise visibility Easy Plug-and-Play: Connects directly into your MFD Marine-Grade Durability: Built with IP67 waterproof housing to withstand harsh marine environments Compact and Lightweight: Easy install Specifications: Operating Voltage: 12V DC Frame Rate: 60 FPS Resolution: Up to 4K Filter: Auto Day to Night Field of View: 50° FOV Horizontal Image: Full Color Waterproof Rating: IP67 Warranty: 2 Years Guarantee: 30 Day Money Back Wire Harness Included? Yes Wire Harness Length: 25' Fuse Size: 5 Amp Connector Type: 4 Pin Quick Connect Mounting Screw Size: #8 1-1/4" Stainless Weight: 1.8 lbs What's In The Box? Nitron XR1 Camera 25' Wire Harness Installation Hardware

Read more less

Reed Switch Fuel Sender - 200 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 8" (200mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 10"L WT: 0.6 lbs UPC: 754059064376

Read more less

Reed Switch Fuel Sender - 800 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 31.5" (800mm)  Insulated 1/4" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 36"L WT: 1.2 lbs UPC: 754059064482

Read more less

Micro TeeA Tee is used to tap into the trunk line for adding a drop connection. The standard tee is also available with a cap for a protected diagnostic connection. Tees can be mated with all other devices on the network of the same connector style.Gold contacts for greatest reliability Keyed connectors for error-free connectionsMale (left)Female (right)Female (Bottom) Specifications: NMEA 2000 Connectors: Tee Connectors Box Dimensions: 1"H x 1"W x 2"L WT: 0.06 lbs UPC: 873804001647

Read more less

VDO SingleViu 52mm (2-1/16") Ammeter - 150 AMP SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.*60mV Shunt RequiredFeatures: 60mV Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Voltage 12-24V Molex MX 150 8 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Voltmeter/Ammeter Gauge Size: 52mm Box Set: No Box Dimensions: 4"H x 5"W x 5"L WT: 0.42 lbs UPC: 4103590682918 Owner's Manual (pdf)

Read more less

Temperature Sender 250°F/120°C Dual FG - 1/4-18 NPTF Features: Ground - Floating Connection - .25" Spade Voltage - 6-24V Thread - 1/4-18 NPTF Component Reference No. - 805/1/4 Max. Temperature Scale - 250°F/120°C  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 1"H x 6"W x 8"L WT: 0.15 lbs UPC: 754059003092 Brochure (pdf)

Read more less

Reed Switch Fuel Sender - 250mm Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 10" (250mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 17"L WT: 0.7 lbs UPC: 754059064529

Read more less

Cockpit Marine Oil Pressure Gauge - 80 PSI - Black Dial/BezelVDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform.  VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio. Features: 0-80PSI Range Works with 240-33 Ohm Oil Pressure Senders 12V Illumination bulb Connection: M4 Stud Mounting Hardware: Included Input Type: Analog Voltage: 12V Dial Scale: Single *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge Type: Oil Pressure Series: Cockpit Marine Voltage - Input Range (Volts): 8 to 12 VDC Gauge Size: 2-1/16" Box Set: No Box Dimensions: 3"H x 3"W x 4"L WT: 0.4 lbs UPC: 754059079455 Owner's Manual (pdf)

Read more less

Ethernet Cable - 1.8M - M12 to M12 for NEP-3The Navico Ethernet Extension cable measures 1.8M and is designed for M12 to M12 connections for the NEP-3. Specifications: Type: Cables Box Dimensions: 2"H x 7"W x 8"L WT: 0.4 lbs UPC: 9420064130634

Read more less

Suncover for GO7 XSR OnlyMake sure your GO7 XSR continues to work like new by protecting it with the Simrad 7" Suncover. This sturdily made cover fits your system perfectly. It protects your unit from overexposure to sun glare during long boat trips. The cover is UV ray resistant. Specifications: Type: Covers Box Dimensions: 1"H x 6"W x 8"L WT: 0.2 lbs UPC: 9420024168967

Read more less

Coral 2" Cylinder Head Temperature Gauge (60-120° F) with SenderPerimeter-lighted Black dial with stylish White and Blue graphics, Black aluminum bezel with burnished leading edge, contoured White pointer, and flat glass lens.A temperature gauge operates by sending a low amperage current through the gauge's meter to the ground via a sending unit with variable resistance. The resistance of the sending units increases or decreases with the changes in pressure, temperature, etc.2" - Hole Size: 2.0625" (53mm)Specifications: Scratch Resistant Lens Black Aluminum Bezel Contoured White Pointer Factory P/N GP9405*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Cylinder Head Temperature Gauge Size: 2" Series: Coral Box Set: No Voltage - Input Range (Volts): 12/24 V Box Dimensions: 4"H x 4"W x 5"L WT: 0.25 lbs UPC: 759266130098

Read more less

9-Pin High Speed Skimmer Transducer 83/200 kHz9-Pin High Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9 pin connector.Features: Transom Transducer High Speed Skimmer 83/200kHz with Temp 9-Pin Connector Specifications: Temperature: Yes Speed Included: No Pins: 9 Mounting Style: Transom Imaging: Standard Chirp: Medium/High Cable Length (Feet): 20' Box Dimensions: 3"H x 4"W x 10"L WT: 1.35 lbs UPC: 9420024177464

Read more less

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 5-pin male connector. The adapter cables have a matching Airmar 5-pin female connector at one end and the correct connector for a specific electronics brand at the other end.Both parts are needed for installation. If the user changes equipment brand later, the transducer can be left in place and the adapter cable replaced.*600W Mix and Match cables cannot be used with 1kw transducers or CHIRP transducers.Features: 10-Pin For Furuno 10-Pin equipment Specifications: Type: Adapters Box Dimensions: 2"H x 7"W x 7"L WT: 1.2 lbs UPC: 801769003611

Read more less

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 9"L WT: 0.55 lbs

Read more less

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: SS60 B60 Specifications: Type: Tools Box Dimensions: 1"H x 4"W x 5"L WT: 0.5 lbs

Read more less

Airmar P79 Adjustable 200/50kHz Plastic In-hull Transducer (8-pin)010-10327-20This entry level in-hull transducer with an adjustable deadrise angle makes installation a snap.The 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise.Transducer kit comes with installation instructions*. Follow the instructions carefully to avoid damaging your boat.*Fiberglass should be no more than 5/8" thick. Not recommended for cored hulls.When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pins: 8 Mounting Style: In-Hull Imaging: Standard Chirp: No Cable Length (Feet): 25' Temperature: No Speed Included: No Box Dimensions: 5"H x 7"W x 9"L WT: 2.7 lbs UPC: 801769000153 Owner's Manual (pdf)Brochure (pdf)

Read more less

52mm ViewLine Bezel - Round - ChromeThe VDO ViewLine modular bezel concept offers true design flexibility in the layout of instrument panels.  The three attractive designs in Black, White or Chrome are suitable for every machinery instrument panel or special vehicle cockpit.  The range also includes bezels with flat, round and triangular profiles.  Each of the bezel designs is compatible with every ViewLine product.Features: Color - Chrome Bezel Profile - Round Size - 52mm Interchangeable Clip System *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Chrome Box Dimensions: 1"H x 2"W x 2"L WT: 0.1 lbs UPC: 7640178724372

Read more less

Tilted Element™ Thru-HullMinimize Your DragThe P19 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). These nearly flush units minimize drag as only 5mm (2/10") of the housing extends outside of the hull. The plastic P19 provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for moreaccurate depth readings.Applications Cruising powerboats and sailboats Sailboats Features Depth only or Depth and temperature Fixed 12° tilted versions for 8° to 15° hull deadrise Right angle cable exit offers low headroom and protection when transducer is stepped on Included rubber washer allows tightening of the hull nut to irregular hull surfaces Housings are ABYC H-27 compliant Optional temperature sensor Plastic housing Boat Size: Up to 9M (30') WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Speed Included: No Pins: 8 Mounting Style: Thru-Hull Imaging: Standard Chirp: No Cable Length (Feet): 30' Temperature: Yes Box Dimensions: 4"H x 6"W x 8"L WT: 2.1 lbs UPC: 801769000764 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

4-Pin Transducer to 8-Pin Sonar PortConnect a 4-pin transducer to an 8-pin sonar port on your compatible marine device with this adapter cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs UPC: 753759197810

Read more less

SingleViu 52mm (2-1/16") Water Temperature Gauge - 250°F - 450-30 Ohm SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.*450 - 30 Ohm Sender RequiredFeatures: 450-30Ω Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Molex MX 150 8 Pin Connector Voltage 12-24V Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Box Set: No Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Water Temperature Gauge Size: 52mm Box Dimensions: 4"H x 4"W x 6"L WT: 0.45 lbs UPC: 4103590683571 Owner's Manual (pdf)

Read more less

Cockpit Marine 85mm (3-3/8") 4 in 1 Gauge - White Dial/BezelDisplays - Oil Pressure, Water Temp (F°), Fuel Level, Voltmeter VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform.  VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio. Features: Uses most common marine oil pressure, water temperature and fuel senders Oil pressure 0 to 80 PSI - 240-33 Ohm 80PSI oil pressure senders Water Temp. 100 to 250°F - 450-29 Ohm 240F/250F marine temperature senders Fuel level - E to F - 240-33 Ohm fuel level senders Voltmeter 8 to 16 VDC  Uses common 3/16"" (4mm) electrical ring terminal connectors Fits common 3 3/8"" (85mm) dashboard holes *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge Type: Multifunction Voltage - Input Range (Volts): 8 to 16 VDC Gauge Size: 3-3/8" Box Set: No Series: Cockpit Marine Box Dimensions: 6"H x 6"W x 8"L WT: 0.85 lbs UPC: 754059093499 Quick Guide (pdf)

Read more less

Reed Switch Fuel Sender - 660 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 26" (660mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 27"L WT: 1 lbs UPC: 754059064475

Read more less

J2K100 Adapter Micro Female - Deutsche 12 Pin 2TUse a Maretron J2K100 Adapter Micro Female Deutsche Cordset to attach the J2k100 directly into J1939 networks of compatible engines, transmissions, and gensets. Specifications: Connection Gender: Female Box Dimensions: 2"H x 7"W x 7"L WT: 0.52 lbs UPC: 873804001463

Read more less

Cortex® H1 Handset Cradle (Gen 2)This non-powered cradle securely holds the Cortex H1 tethered or Cortex H1P portable handsets.

Read more less

1815 8.4" Color LCD 19" 4kW Radar with 10M CableThe Furuno 1815 is a standalone Radar package that features an 8.4” color LCD screen and stylish, low-profile 4kW radome antenna. It is designed for a wide variety of vessels, including pleasure craft, workboats and small fishing boats that require an easy-to-use, true color Radar at an affordable price point.The unit allows you to select from several adjustable display colors to ensure that it can be viewed in a variety of conditions. The gimbal mount allows the display to swivel when desktop mounted, allowing the user to adjust the display angle for optimal viewing comfort. Overhead mounts are available for added flexibility or you can flush mount it with a simple 5” hole saw. Furuno’s Fast Target Tracking (TT) function allows the user to manually or automatically track up to 10 targets. After selecting a target, it takes only seconds for a speed and course vector to be displayed, making quick work of determining the safety of approaching or moving targets. When using Furuno’s proprietary True Trail mode, moving objects will show a gradation of target trails in their wake, making it possible to gauge the movement of targets at-a-glance. Whenn connected to a Furuno AIS, up to 100 targets can be tracked and displayed on the screen, allowing the operator to instantly gather important information about other AIS-equipped vessels nearby.  The 1815 also utilizes Furuno’s True View mode to make reading the display more intuitive. For example, when your vessel is turning, the echoes stay consistent on the display, so you can constantly see the targets on the screen, without waiting for them to update after the turn. This mode proves to be especially useful when you are turning to avoid hazardous targets.  The automatic gain reduction on the 1815 makes use of algorithms that have been refined over many decades of Furuno experience and innovation. This means the 1815 is second to none in clutter rejection. With no input from the user, this Radar will automatically eliminate unnecessary echoes and present a clear display image with every sweep of its antenna. This ensures that you will be able to acquire other vessels, buoys and objects on the sea surface in good weather, or when sudden fog and storms make the visibility poor.  Other display modes include Off Center, allowing own ship's position to be shifted to a pre-registered point on screen, and Zoom, which will expand and display a selected target up to 2x in a zoom window.Features:•8.4" Portrait Color LCD Display (IPx6 Rating) •Compact and Lightweight 4kW Radome Antenna •Fast Target Tracking provides instant heading and speed info for up to 10 targets •True Trail and True View modes (heading sensor required) •AIS display for up to 100 targets (optional AIS receiver required) •Advanced auto-adjust settings for Gain/Sea Clutter/Rain Clutter •Digital Signal Processing for improved auto Gain/Sea/Rain controls •Cosmetic match to FCV588 Fish Finder with UI based on 1835 & FR8XX5 Radars •Swivel mount bracket to adjust the angle of the display unit •12-24 VDC input and low power consumption (Up to 38 W during transmit) •5.2-degree horizontal and 25-degree vertical beam width •External pigtail cable eliminates need to open the dome to install the Radar cable •(3) NMEA0183 inputs for GPS, heading, and AIS (Port 3 for heading only) •(2) NMEA0183 outputs for TTM, TLL and RSD (with required nav sensor inputs) Advanced AutoAdjust settings for Gain/Sea clutter/Rain clutter - To display targets clearly and accurately, the gain must adjusted. The 1815 can do this automatically for you. By automatically adjusting the gain, the Radar eliminates unnecessary echoes and display a clear image.Fast Target Tracking™ (TT) FunctionFast Target Tracking™ (TT) function manually or automatically acquires and tracks 10 targets. After selecting a target, it only takes a few seconds for a speed and course vector to be displaed. With accurate tracking information, estimation of other vessel's course and speed is made easier.AIS Display When connecting a Furuno FA-30/50 AIS unit, up to 100 AIS targets can be tracked and displayed on the Radar screen. The AIS improves safety during travel by sharing the status and position of your vessel with other AIS-equipped vessels nearby. You can easily read detailed information about other AIS equipped vessels nearby, such as speed and heading.True Trail Mode When using the True Trail mode, moving objects will show up on the main screen with a gradational trail. These trails make it possible to see the movement of nearby vessels in the blink of an eye.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Array Size (Inches): 19" Power - Output: 4kW Screen Size: 8.4" Box Dimensions: 16"H x 22"W x 31"L WT: 38.6 lbs UPC: 611679369840 Brochure (pdf)

Read more less

Mast Bracket for gWind™/gWind WirelessSecure your gWind and gWind Wireless mast securely with this bracket.Compatible Devices:  GNX™ Wireless Sail Pack 43  GNX™ Wireless Sail Pack 52  GNX™ Wireless Wind Pack  gWind™ Transducer  gWind™ Wireless 2 Transducer  gWind™ Wireless Transducer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 3"L WT: 0.1 lbs UPC: 753759116767

Read more less

8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XIDUse this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 1"H x 4"W x 7"L WT: 0.2 lbs UPC: 753759136345

Read more less

Marine Network Cable - 50'Garmin's marine network cables offer additional cable lengths to help with installation. Various sizes are sold separately.

Read more less

Camera Coax Cable - 25MAdd additional length for installations with this 25M camera coax cable.

Read more less

Cortex® H1P Handset Charging Cradle (Gen 2)This cradle is designed to securely hold and charge your Cortex H1P portable handset. With built-in charging pins, it is pre-wired for 12 V or 24 V DC connections.

Read more less

HALO Dome Cable - 10M10M cable for HALO Dome Radar. Specifications: Type: Cables Box Dimensions: 2"H x 10"W x 10"L WT: 2.15 lbs UPC: 9420024173909

Read more less

GT15M-THF 0 Degree 600W SS Thru-Hull TransducerDesigned for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 600-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on the display.Midband Chirp Traditional SonarThis 8-pin, 600-watt stainless steel thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 1,200’ in saltwater and 1,900’ in freshwater.Broad Frequency RangeUse the perfect frequency for the waters being fished. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings.Optimum Ping SensitivityOffering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on a compatible chartplotter display.Thru-Hull InstallationA durable stainless steel housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.Auto-ID TechnologyEnjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to configure itself to the transducer being used automatically.Fits Various Hull TypesConfigurable for various boat hull materials, including fiberglass, composite, steel, aluminum, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20 degrees without a fairing block.Specifications: Transducer Frequency: Medium band chirp (85-165 Khz) Transducer Power: 600 W Transducer Beam Width: 24-16 degrees Transducer Maximum Depth: 1200 Ft Saltwater; 1900 Ft Freshwater Transducer Cable Length: 50 ft. Transducer Depth/Speed/Temperature: Depth, temperature Transducer Number of Pins: 8-Pin Transducer Supported Deadrise/Transom Angles: 0 degrees support hull deadrise angles from 0 degrees to 7 degrees Housing Material: Stainless steel In the Box: GT15M-THF transducer Jam nut Washer Thread isolator Hull isolator Documentation Specifications: Cable Length (Feet): 50' Mounting Style: Thru-Hull Temperature: Yes Box Dimensions: 7"H x 8"W x 11"L WT: 7 lbs UPC: 753759319922

Read more less