NavPilot 300 Autopilot System - No Rate CompassNavPilot 300 is not your ordinary Autopilot - The NavPilot 300 is a revolutionary autopilot. With Fantum Feedback, NavPilot outboard installations no longer require use of a physical rudder feedback unit. This results in a streamlined, simplified installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 provides unmatched outboard Autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, with one to four outboard engines, where it achieves precise course control from slow trolling to speeds of well over 60 knots.Gesture Control - just push, point and shoot!The Gesture Controller is a revolutionary and unique way to steer your boat remotely. By using Bluetooth signals, it is possible to control the Autopilot from anywhere on the boat within 10 meters. Just push, hold the button, point to the desired heading and release to let the Autopilot redirect the boat!Versatile Display Modes on a vivid 4.1" Color LCD DisplayThe SABIKI™ mode lets the autopilot control while you are drifting astern, so you can focus on fishing instead of steering. Maintaining heading astern while compensating for wind and tide, SABIKI™ mode is uniquely tailored for Sabiki fishing, jigging and bottom fishing.Other display modes include Furuno's Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode, where one of four pre-programmed maneuvers can be performed around a specified target at a user selected distance. These include Zig-Zag, Orbit, Figure 8, or a Spiral maneuver. The Fish Hunter feature can also be used for Man Overboard (MOB).Features: 1-DIN 4.1" IP56 Waterproof Color Display (2 more Control Heads can be added) Full control from NavNet TZtouch, TZtouch2 & the all-new GP1871F/GP1971F Navigation Modes: Auto, Advanced Auto, Sabiki, Nav/Route Tracking, FishHunter Pigtail cable design for simplified installation NMEA2000 Certified System (includes output of Heartbeat PGN) Self-learning adaptive software Built-in simulator and slide show Bluetooth Gesture Controller (GC001) included as standard supply Targeted for center console outboards and drive-by-wire systems on small to mid-sized boats. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Steering Type: Hydraulic Box Dimensions: 7"H x 12"W x 22"L WT: 8.75 lbs UPC: 611679372031

Read more less

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with: B164 SS164 SS264 Specifications: Type: Tools Box Dimensions: 1"H x 6"W x 11"L WT: 0.85 lbs

Read more less

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with: B117 B150 B744V B744VL B765C SS555 Specifications: Type: Tools Box Dimensions: 1"H x 4"W x 9"L WT: 0.6 lbs

Read more less

Chesapeake Black 2" Fuel Level Gauge (E-1/2-F)Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.Fuel Level gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel.2" - Hole Size: 2.0625" (53mm)Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N GP9368*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Fuel Level Series: Chesapeake Black Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266137011 Quick Guide (pdf)

Read more less

Maretron's Alarm Module generates visual and audible alerts for any monitored condition. The Alarm Module includes an extremely loud 105 dB SPL Piezoelectric sounder, along with a red high-brighness LED to indicate an alarm condition. A second green LED indicated that the Alarm Module is powered and ready to be triggered. The audible alarm can sound any one of 32 distinct pre-programmed patterns to indicate different alerts. The Alarm Module can be triggered by alarms generated by Maretron's N2KView Vessel Monitoring System, or by Maretron's DSM250 Color Graphics Display. The Alarm Module mounts in a standard electric box or or can be flush mounted on any surface. Completely waterproof, the Alarm Module can be mounted inside or outside the vessel.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Platinum 4" Multi-Function - Fuel Level & Voltmeter Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.  All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.  Multi-Function Gauge Displays: Fuel (E-1/2-F) Voltmeter (10 - 18 VDC) 4" - Hole size: 3.375" (85mm)Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N GF0275*Sold as an Individual*Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: Platinum Gauge Type: Multifunction Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 5"W x 6"L WT: 0.9 lbs UPC: 759266220133 Owner's Manual (pdf)Brochure (pdf)

Read more less

SAS-900 6" Color Class A AIS TransceiverInternationally Certified SOLAS Class A AIS TransceiverSAS-900 is the world's most sophisticated and robust SOLAS and Inland-Waterway certified AIS Class A Transceiver.Fourth generation AIS technology delivers unmatched real world AIS receive, transmit and message processing performance and reliability. Quality engineered and manufactured without compromise, with features such as IPX7 weather proofing and integrated shock and vibration protection for continuous long term operation in even the harshest commercial or military environment.A large integrated high definition color screen maximizes the benefit of the SAS-900's powerful Electronic Chart display engine with full detailed chart AIS overlay, and multiple target management functionality, including innovative MOB features and many more.Charts are C-Map Max software in MicroSD card. Specifications: GPS Included: Yes Function: Receive/Transmit Display Included: Yes Antenna Included: No AIS Class: A Box Dimensions: 5"H x 10"W x 15"L WT: 6.3 lbs UPC: 010407421063 Brochure (pdf)

Read more less

Bullet Skimmer Transom Mount TransducerWide Angle 200khz Transom Mount Transducer for the HOOK2 4x Series Fishfinders.Max Depth: 500ft Specifications: Temperature: Yes Chirp: No Cable Length (Feet): 20' Speed Included: No Pins: 8 Mounting Style: Transom Imaging: Standard Box Dimensions: 3"H x 5"W x 10"L WT: 0.8 lbs UPC: 9420024166284

Read more less

NAC-3 High Current Course ComputerThe NAC-3 Autopilot Computer is the brains behind your Simrad autopilot system. It contains the electronics needed to operate a hydraulic steering pump or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. The NAC-3 was designed for boats 10M (33') or greater in length and is rated to operate high-current pumps, mechanical drive units, and solenoid valves (30 Amps continuous/50 Amps peak).Features: Reliable autopilot performance based on Simrad Continuum™ steering technology Recommended for boats above 10M (33') in length High-current output of 30 Amps continuous, 50 Amps peak Clutch output (3 Amps maximum) Compatible with high-current drive pumps, mechanical drives, hydraulic linear drives, and solenoid valves Virtual rudder feedback for simplified installation aboard outboard and sterndrive (inboard/outboard) boats Supports Simrad RF25 and RF300 rudder feedback units NMEA 2000® connectivity to heading sensors, rudder feedbacks, dedicated autopilot controllers, and multifunction displays NMEA 0183® input Specifications: Type: Parts Box Dimensions: 5"H x 9"W x 10"L WT: 3.2 lbs UPC: 9420024154397 Owner's Manual (pdf)

Read more less

AP48 Autopilot Control Head with Rotary KnobPresented on a wide-angle and zero-fog color display, the AP48 is engineered for responsiveness and ease of use in all conditions. It pairs a large aluminium rotary control dial with dedicated keys for instant access to steering modes, automated turn patterns, and more.Features: Intuitive autopilot interface with extended keypad Large, heavy-duty rotary control dial for precision steering Continuum steering technology Optically bonded 4.1-inch color display Ultra-wide 170-degree viewing angle Dedicated one-degree and ten-degree port/starboard dodge keys Automated turn patterns for fuel-efficient, hands-free maneuvers No Drift steering holds your course against wind and tide Depth contour tracking makes it easy to fish ledges and drop-offs Specifications: Type: Parts Box Dimensions: 4"H x 8"W x 11"L WT: 2.8 lbs UPC: 9420024162514 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Video Adapter Cable for HDS Gen2Features: 2 ft. adapter cable connects to existing power cable and adds video input connection For displaying video from rear-view, underwater, engine monitoring and night vision cameras or from any video source providing standard video output on an RCA jack Specifications: Type: Adapters Box Dimensions: 3"H x 4"W x 10"L WT: 0.4 lbs UPC: 9420024122457

Read more less

WS310 Wired InterfaceWS310 (wired) Interface for use with WS310 Wind Sensor, allows connection to your NMEA 2000® network.Features:Interfaces a WS310 wind sensor to an NMEA 2000 networkSpecifications: NMEA 0183 Sentences supported: MWV, R NMEA 2000 Connectivity: 1 x Micro-C port, 1 LEN Supply Voltage: 12V DC (9 - 16V DC) Operating Temperature Range: -15°C to +55°C (5°F to 131°F) Storage Temperature Range: -20°C to +60°C (4°F to 140°F) Waterproof Rating: IPX7 Compass Safe: 300mm (12") Dimensions W x H x D: 90 x 20 x 10mm (3.5 x 0.8 x 0.4") Warranty: 2 Years

Read more less

Triton² Digital DisplayMulti-purpose sailing instrument and autopilot display with a 4.1" color screen, optically bonded for zero condensation and featuring trans-flective LCD technology for exceptional contrast and visibility in all lighting conditions. 8mm mounting height matches other B&G MFD's and system component.The full-colour Triton² Display provides sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data and more.An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD technology provides exceptional contrast and visibility - day or night - while consuming less power than traditional backlight-only displays. The flexible, NMEA 2000® certified, Triton² Display can be integrated into a wider navigation system and also be combined with a Triton² Pilot keypad and NAC autopilot computer to create a complete autopilot control system, featuring B&G sail-specific autopilot steering algorithms.Features: Optical Bonding Sporting an Optically Bonded 4.1" LCD display, Triton² allows you to see clearly in all conditions with its large clear color display 100% free from condensation or fogging Efficient LCD Technology: Transflective LCD technology uses reflected ambient light to enhance day-time visibility, providing the clearest sailing dedicated display available. LED backlighting provides highly adjustable illumination when required, making Triton² exceptionally efficient and extending time available from your battery capacity Easy to Use: Triton² provides simple on-screen menus controlled by soft-touch and reliable waterproof buttons Intuitive design makes it easy to configure and use your display Low Profile Design: At just 8mm thin the Triton² instrument adds a sleek look to any boat Nearly half the dimension of its thick competitors, Triton² won't get in the way, catch ropes or offend the eye! NMEA 2000® Certified: NMEA 2000 certification means you can be confident when adding Triton² to an existing NMEA 2000 system. NMEA 2000 certification also opens up a wide variety of future expansion options for your Triton² system Easy Installation: A straight-forward front mounting method and a clip-on bezel over the (4) mounting screws combine with a single NMEA 2000 connection carrying both power and networked data Autopilot Integration: Triton² will display B&G Pilot data on a clear status screen Specifications: Dimensions: 118 x 115 x 28mm (4.6 x 4.5 x 1.1") Weight: 0.32 kg (0.7 lbs) Power Consumption: 1.8 Watts (MAX) Network Load: 3 LEN Color: Black Display Size: 4.1" (diagonal). 4:3 Aspect ratio Display Type: Transmissive TFT-LCD, bonded. White LED backlight Dsiplay Resolution: 320 x 240 pixels Illumination: White for day mode. Red, green, blue or white for night mode Environmental Protection, Waterproof: IPx7 Environmental Protection, Humidity: up to 95% RH Compass Safe Distance: 300mm (1.0") Temperature Operating: -15 to +55°C (5°F to +131°F) Temperature Storage: -30 to +70°C (-22 to +158°F) Specifications: Shape: Square Screen Size: 4.1" Instrument Function: Multifunction Transducer Type: Not Included Box Dimensions: 5"H x 6"W x 9"L WT: 1.6 lbs UPC: 9420024155196 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

AP70 Mk2 Autopilot - Control Head OnlyThe AP70 Mk2 is a dedicated autopilot controller designed to meet the needs of professional mariners aboard a variety of commercial vessels.Replacing both the AP70 and AP80 as our IMO/SOLAS autopilot controller, the AP70 Mk2 retains much of the well-reputed platform of its predecessors, but with a brilliant new display and modernised software interface.Engineered for responsiveness, robustness and ease of use, the AP70Mk2 pairs a precision rotary control dial with dedicated buttons for instant access to steering modes, several custom-configurable work modes and multiple rudder/thruster integration.Wheelmarked for use on SOLAS vesselsThe AP70 Mk2 builds on, and continues the legacy of the SIMRAD Pro autopilot product portfolio. Its performance, robustness and quality are proven and recognised with the wheelmark symbol, making it suitable for all vessels ranging from small work- boats to large tankers.Advanced configuration and tuning options to suit all shipsParameters ranges and tuning options to support vessel dynamics. Adjustable for all weather conditions, hull types, work situations. Suitable for retro-fit on old ships as well as modern new-builds.Compatible with all common rudder/drive typesWater jet, Azi-pods, Voith-Schneider, Rudder, outboard. Control signals to control, hydraulic pumps, solenoids, analog current/voltage, control/handshake signals.Up to 6 rudders/thrusters integrationDual rudders, fore and aft thrusters supports large and complex installations and redundancy.Heavy-duty rudder feedback supportSimrad heavy-duty rudder feedbacks are supported.Configurable Work Mode and Low/High Speed ModesAutopilot settings can be tuned for optimal performance in separate low-speed, high-speed, and Work modes. The user-configurable Work mode allows the autopilot system to be configured for optimal response in a specific situation, such as a fully laden vessel, configurable thruster usage.No Drift SteeringNo Drift mode integrates GPS navigation with auto-steering, using position data to counteract the effects of wind and tide. This allows the AP70 Mk2 to maintain a straight track over ground on the current course, without the need to manually set a waypoint or route.Navigation steering, route followingNavigation steering controls the ship on a pre-planned route from a Simrad MFD, Simrad ECDIS or third party MFD and ECDIS.Command transfer and multiple control stations supportCommand transfer is a mechanism useful in multi-controller installations. It enables the officer on watch to allow, deny the transfer of autopilot control to control devices such as a secondary AP70 Mk2 or a remote controller on a bridge wing station, above deck, or aft bridge depending on the work scenario. The AP70 Mk2 can also be used in an open configuration, where control flow is unrestricted.Features: Wheelmarked for use on board SOLAS vessels (IMO, MED-B) Advanced configuration and tuning options to suit all ships Compatible with all common rudder/drive types Up to 6 rudders/thrusters integration Heavy-duty rudder feedback support Configurable work modes and low/high speed modes No Drift steering holds course against wind and tide Navigation steering, route following Command transfer and multiple control stations support Specifications: Steering Type: Hydraulic Box Dimensions: 5"H x 9"W x 12"L WT: 5 lbs UPC: 9420024178720 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Attaches transducer to a trolling motor.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 4"W x 9"L WT: 0.25 lbs UPC: 042194535944

Read more less

TotalScan™ Transom Mount transducerAn all-in-one transducer that matches proven CHIRP sonar with StructureScan® HD and DownScan Imaging™ technology, making it possible to target fish and search for fish-holding structure with the same transducer.The TotalScan transducer features multiple mounting options and is fully compatible with displays featuring integrated StructureScan HD, like Lowrance HDS Gen3, Elite-7 Ti, Elite-5 Ti, Simrad NSS evo2, and NSO evo2. The TotalScan transducer is one of four new transducers that feature the new xSonic (9-pin black) 24ft cable. An adapter cable will be available to connect xSonic (9-pin black) transducers to legacy displays that have a 7-pin blue connector. Note: When a TotalScan transducer is connected to a legacy display with a 7-pin blue connector, the side-scanning feature will not function.Features All-in-one transducer featuring CHIRP Sonar, StructureScan HD and DownScan Imaging Also supports 83/200kHz Broadband Sounder frequencies Supports Medium and High CHIRP Sonar frequencies Supports 455/800kHz StructureScan HD frequencies Multiple mounting options Fully compatible with Lowrance HDS Gen3, Elite-7Ti, Elite-5Ti, Simrad NSS evo2, and NSO evo2 Compatible with select legacy displays (Requires xSonic transducer adapter - side-scanning sonar not supported on legacy products) Specifications: Temperature: Yes Speed Included: No Pins: 9 Mounting Style: Transom Imaging: Standard/Down/Side Chirp: Medium/High Cable Length (Feet): 24' Box Dimensions: 3"H x 10"W x 13"L WT: 3.25 lbs UPC: 9420024145265

Read more less

Sun Cover for HOOK2 9" SeriesKeep your HOOK2 safe from dirt and debris with a Lowrance Sun Cover Specifications: Type: Covers Box Dimensions: 1"H x 8"W x 11"L WT: 0.4 lbs UPC: 9420024168219

Read more less

RJ45-M Ethernet Adapter Cable6" RJ45-Yellow Round Ethernet adapter cable for Simrad NSO evo2 and Zeus2 displays.

Read more less

Suncover for HDS-9 LIVE DisplayProtective Suncover for HDS LIVE 9-inch displays. Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 12"L WT: 0.65 lbs UPC: 9420024174753

Read more less

Simrad Power Cable f/NSE NSS & StructureScan 3D, GO7, GO9, GO124 pin conn. to 4 bare wires for power in - power control bus and external alarm - 6.5 ft (2 m). Specifications: Type: Power Cords Box Dimensions: 1"H x 4"W x 5"L WT: 0.3 lbs UPC: 042194901145

Read more less

Adapter cable, 7 pin BLUE to bare wires Specifications: Type: Adapters Box Dimensions: 2"H x 3"W x 7"L WT: 0.2 lbs UPC: 042194535111

Read more less

HDS PRO 10 - with Preloaded C-MAP DISCOVER OnBoard - No TransducerSee more and catch more with the HDS PRO 10 fishfinder/chartplotter. Watch fish react to your lure live with support for high-resolution ActiveTarget® 2 Live Sonar, and find fish and holding structure with ultra-high-definition Active Imaging™ HD. Quickly locate prime fishing areas with preloaded C-MAP® DISCOVER OnBoard charts and get full fishing system networking with expanded boat control from bow to stern.In the box: HDS PRO fishfinder/chartplotter (10-inch display screen) C-MAP DISCOVER OnBoard (Preloaded in HDS PRO fishfinder/chartplotter) Features: Preloaded C-MAP DISCOVER OnBoard charts with 1-foot contours on 19,000+ US Lakes, 9,400+ Canadian Lakes SolarMAX™ HD Touchscreen viewable at extreme angles and through polarized lenses High-definition Active Imaging™ HD ready (Lowrance CHIRP/SideScan/DownScan Imaging™) High-resolution ActiveTarget 2 Live Sonar ready  FishReveal™ with SideScan view, as well as Downscan (*Requires S3100 and compatible transducer) Real-time mapping is available with C-MAP Genesis Live. Support for ActiveTarget Scout and Ghost Trolling Motor 360 chart overlay views Large programmable keys Touchscreen control of Power-Pole anchors, Ghost Trolling Motor, Autopilot, and Lowrance Outboard Pilot NMEA 2000, wireless and bluetooth, connectivity – plus smartphone notifications Display: Backlight Color: Pure white LED Display Resolution: 1280 x 720 Viewing Angles: 80° top/bottom, 80° left/right Connectivity: Bluetooth: Integrated Bluetooth 4.0 with support for Bluetooth Classic Ethernet Ports: 2 x 100 Mbit, 6 max MFD's on a network Connectivity WiFi: Internal 802.11b/g/n and compatible with WiFi-1 Module NMEA 2000 Connectivity: 1x Micro-C SD Card Storage: 2 micro SD cards up to 32GB Electrical: Power Consumption Max: 2.9A @ 13.8VDC with Full Backlight, Sonar on Power Consumption Minimum: 2.0A @ 13VDC with Full Backlight, Sonar on Power Consumption Typical: 2.0A @ 13VDC with Full Backlight, Sonar on Recommended Fuse Rating: 3A Supply Voltage: 12 v DC (10.8-17VDC) Environment: Operating Temperature Range: 5°F to 131°F (-15°C to 55°C ) Storage Temperature Range: 4°F to 140°F (-20°C to 60°C )  GPS: GPS Receiver Channels: 16 Update rate: 10 Hz MFD (Multi-Function Display): Cartography included: C-MAP Discover OnBoard (AMER models), C-MAP World Background (ROW models), Navionics basemap (AMER and ROW models) Internal Storage: 8.0 GB Internal Waypoints, Routes, Tracks: 3000 Waypoints, 100 Routes, and 100 Trails with up to 10,000 points per trail *Sidescan Fish Reveal requires S3100 module and a compatible transducer Specifications: Cartography Brand: C-Map Screen Size: 10" Touchscreen: Yes Transducer Included: No Box Dimensions: 6"H x 14"W x 16"L WT: 8 lbs UPC: 9420064129799 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Power Cable for Cortex - 6'Replacement 6’ Power Cable for the Cortex M1 & V1.

Read more less

Portable Power CableConnect your Panoptix™ LiveScope System or Panoptix PS22 transducer and compatible ECHOMAP chartplotter to the battery of your compatible Panoptix ice fishing bundle with this power cable. It also includes a convenient charge port plug and 10A fuse holder.

Read more less

4-Pin Transducer to 12-Pin Sounder Adapter CableConnect a 4-pin transducer to a 12-pin sonar port on your compatible marine device with this adapter cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 1"H x 5"W x 7"L WT: 0.3 lbs UPC: 753759197490

Read more less

Second Station Mounting Kit f/echoMAP™ 70dv/70s, GPSMAP® 741/741xsMount any additional echoMAP™ or GPSMAP® on your boat with this second mounting station. Also includes a wiring harness to power your compatible device and connect to an optional NMEA 0183 network.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

GT23M-TH Stainless Steel, TH Mount Transducer, Mid-Band CHIRP/CHIRP DownVü - 260/455kHz, 500W, 8-PinPerfect for coastal and offshore fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar with a stainless steel stem, this thru-hull mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat.The 8-pin transducer features mid-band CHIRP traditional sonar (80-160 kHz) and has a power rating of 600 W. The CHIRP ClearVü (260/455 kHz) element has a power rating of 500 W.For installation, follow the included instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: No Mounting Style: Thru-Hull Chirp: Medium Cable Length (Feet): 30' Imaging: Standard/Down Pins: 8 Box Dimensions: 6"H x 14"W x 17"L WT: 8.65 lbs UPC: 753759148607 Owner's Manual (pdf)

Read more less

GST™ 43 Thru-Hull Speed/Temperature Transducer w/GST™ 10 BundleThe GST 43 is a thru-hull transducer that can read water speed and temperature. The transducer can retrofit an existing Nexus 43mm thru-hull transducer (TH43).Bundled with the GST 10, the GST 43 can connect directly to the NMEA 2000® network, and the information can be displayed on a compatible Garmin chartplotter or instrument display.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: Yes Mounting Style: Thru-Hull Chirp: No Box Dimensions: 5"H x 6"W x 8"L WT: 2.8 lbs UPC: 753759139889

Read more less

STRIKER™ 4 FishFinder with 4-Pin, 77/200kHz TM Transducer3.5-inch CHIRP Fishfinder with GPSFeatures: Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS Find fish; mark and return to hot spots, docks and ramps Convenient keypad operation Includes CHIRP (77/200 kHz) sonar transducer; transmit power (200 W RMS)/(1,600 W peak-to-peak) Upgrade to high performance CHIRP with a GT8 or GT15 transducer (each sold separately) Finding fish is easier than ever with STRIKER 4 fishfinder. Mark and return to your hot spots, boat ramps and docks, and share your favorite waypoints and routes with other STRIKER and echoMAP™ combos. Smooth Scaling™ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Plus, it has a built-in flasher and displays speed data. Includes tilt/swivel mount, CHIRP (77/200 kHz) transducer with transom and trolling motor mounting hardware and cable. For high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold separately).Experience the Clarity of CHIRPSTRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what's below.Mark Spots with High-Sensitivity GPSUnlike regular fishfinders, STRIKER fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish.Navigate Easily with Waypoint MapSince the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It's also a great tool for finding your way back to the boat ramp.Check Your Speed on ScreenYou can quickly and easily see your boat's speed on the screen of your STRIKER fishfinder. It's a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas.Fish Vertically with Built-in FlasherSTRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it.Take Your Fishfinder AnywhereA portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it's perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.In The Box STRIKER 4 Dual-beam transducer Transom and trolling motor mounts Tilt/swivel mount Power cable Documentation ConnectionsTransducer pin numbers: 4 PinWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Included Transducer: 010-10249-20 Screen Size: 3.5" Transducer Type: Transom Mount Transducer Included: Yes Box Dimensions: 5"H x 7"W x 9"L WT: 2.36 lbs UPC: 753759147013

Read more less

WS310 Wired Wind Sensor OnlyA high precision wired wind sensor, designed for cruising and club racing sailors. The WS310 wind sensor offers high performance data accuracy, with improved aerodynamics suitable for all yachts.The WS310 wind sensor is the perfect solution for any sailor looking to get accurate and fast wind data to your instruments from a wired wind sensor. High PerformanceDesigned to provide highly accurate wind data in all conditions at all points of sail and heel.ReliabilityThousands of hours of real-life testing have proved this instrument to be exceptional in all conditions. Providing fast and accurate data at all times*Requires WS300 Cable (20, 35, 50 or 80m). WS310 (wired) Interface required if connecting to a NMEA 2000 network.Features: Superior data accuracy and aerodynamics Sensor quality Unbeatable reliability Specifications: Waterproof rating: IPx6 (spray), IPX7 (immersion) Weight: 0.66 lbs Power consumption typical: <0.1 W Supply voltage: 12V DC (9-16V DC) Operating temperature range: 5 degrees F to 131 degrees F Warranty period: 2 years Storage temperature range: 4 degrees F to 140 degrees F Dimensions WxHxD: 20" x 13" x 2" Approvals compliance: IEC/EN 60945 NMEA 0183 Sentences supported: MWV, R at 10Hz

Read more less

Lowrance Outboard Cable-Steer Pilot PackEverything you need in one box to fit an autopilot to your outboard motor, the Outboard Pilot lets you focus on fishing activity while keeping the boat on course. When connected to a Lowrance HDS Gen2 or Gen2 Touch, the Outboard Pilot can steer to a waypoint or along a route, select a turn pattern or simply hold a constant heading.The Lowrance SmartSteer™ user interface allows you to easily switch between electric-steer, trolling-motor control and outboard motor control directly from your HDS display. And, with your HDS display, you can easily convert trails to routes - so you can retrace a previous track and get your boat back to the dock from your fishing area. HDS Units require 3.5 Software Steer your outboard motor to a heading, waypoint, route or cursor, with control from your HDS Gen2 or Gen2 Touch display Lowrance SmartSteer™ interface provides control of your cable-steered outboard motor, as well as the MotorGuide Xi5 Pinpoint electric-steer trolling motor "One-touch" route creation from trails Pre-set turn patterns for more effective fishing/trolling presentations Recommended for single-outboard setups, on boats that are 30 feet and less, in length VRF (Virtual Rudder Feedback).simplifies pilot installation eliminating the need for a rudder position sensor Easy setup.straightforward guide steps you through first-time install Easy-to-install, plug-and-socket connection with no complex terminal wiring Supported by Lowrance Advantage Service program Dash-mount button for one-touch Auto/Standby activation Steer to Heading, Course or Route High efficiency, super-quiet 0.8L hydraulic gear pump Lowrance Outboard Pilot Cable-Steer Pack replaces the manual helm-drive unit Morse 290, Morse 304411 and Teleflex SSC52 cable compatibility Helm-1 is only compatible with the NAC-1.Helm-1 includes variable-voltage feedback interface 2 Year Limited Warranty Package Includes:NAC-1 Autopilot Computer - 000-11769-001The brains behind the Lowrance Outboard Pilot system. It contains the steering computer and electronics for the drive unit motor and clutch. Helm-1 for Outboard Pilot - 000-11771-001This drive unit replaces your manual helm-drive unit on single cable installations. Compatible with Morse 290, 304411 and Teleflex SSC52 cables. Includes voltage rudder-feedback sensor, and is only compatible with NAC-1.N2K 4 Way - 000-10996-001NMEA2000 4-way joiner. Connect four NMEA2000 Micro-C devices to the NMEA2000 Network.N2KEXT-2RD - 000-0119-880.6M (2') NMEA 2000® cable for backbone extension or or drop cable to connect an additional network deviceN2KEXT-6RD - 000-0127-531.82M (6') NMEA 2000® cable for backbone extension or drop cable to connect an additional network deviceN2KEXT-15RD - 000-0119-864.55M (15') NMEA 2000® cable for backbone extension or or drop cable to connect an additional network deviceTR-120-KIT - 000-0127-52Set of 1 male and 1 female NMEA 2000® terminatorsMICRO-C POWER CABLE ONLY - NO T CONN - 000-12202-001 Specifications: Type: Parts Steering Type: Cable/Solenoid Box Dimensions: 7"H x 16"W x 19"L WT: 17.7 lbs UPC: 9420024134320 Brochure (pdf)

Read more less

Adapter 7-Pin Blue Transducer to a 9-Pin Black UnitFeatures: Connects legacy 7-Pin Blue Transducer to a 9-Pin Black Unit Sonic Connector Transducer Adapter Cable Compatible With: HDS Gen3 Elite-Ti Series NSS evo2 GO XSE Series SonarHub™ Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbs UPC: 9420024155301

Read more less

5 Pin Ethernet Cable Joiner (Female to Female) Specifications: Type: Parts Box Dimensions: 1"H x 4"W x 8"L WT: 0.12 lbs UPC: 9420024118641

Read more less

Suncover for NSX 3009Make sure your NSX continues to work like new by protecting it with the Simrad Suncover. This sturdily made cover fits your system perfectly. It protects your unit from overexposure to sun glare during long boat trips. The cover is UV ray resistant. Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 12"L WT: 0.4 lbs UPC: 9420064118793

Read more less

Full Package - Single Probe with Safety Leader, Probe Charging Station, & Probe Safety LeaderDrawing on years of research and decades of combined experience, the Seeker™ offers anglers a level of data precision, speed, and efficacy that is unrivaled in the fishing industry.Built For The HuntThe Seeker™ represents an advancement in trolling technology, providing anglers with a clear and powerful method for monitoring water conditions, making it easier than ever to gain insight through the use of real-time metrics.Data DeliveryAccurate readings of depth, speed, and temperature to facilitate an informed fishing experience. Display data in metric or imperial.Seeker AppCustom application compatible with most MFDs, as well as mobile devices and tablets running iOS or Android operating systems.Probe ModesQuick data refresh rate—updates every 5 seconds in normal mode or every half-second in thermocline mode.Rapid ChargingOperates on an integrated, fast-charging battery that supplies an impressive 100+ hours of life. Includes a heavy-duty charging station.Build QualityDesigned and manufactured by Airmar in the USA using premium electronics and build materials.ExpandabilityThe Seeker™ ecosystem is engineered with expansion in mind—future releases are already in development. Owner's Manual (pdf)

Read more less

GT56UHD-THP Thru-Hull Mount Transducer - PairThis all-in-one transducer offers ultimate versatility, featuring Ultra High-Definition ClearVü and SideVü scanning sonars, high wide CHIRP traditional sonar, and more, so you can spend more time catching fish.Get brilliant image clarity of structure and fish below your boat at greater depths than other high-frequency scanning sonars. It puts more power on targets via a downward-facing element. See everything the first time with stunningly clear images of structure and fish off to the sides of your boat. SideVü sonar now has a 20% greater range at 1,000 kHz, so you can see even farther than before.Features: See everything below and around your boat with Ultra High-Definition scanning sonar High wide CHIRP traditional sonar delivers target separation like no other Multiple sonar frequencies have you covered — no matter what depth you’re fishing See targets and structure in bright, vivid color Mount this transducer your way — transom, trolling motor or thru-hull Specifications: Cable Length (Feet): 25' Chirp: High Wide Imaging: Standard/Down/Side Mounting Style: Thru-Hull Pins: 12 Speed Included: No Temperature: Yes Box Dimensions: 4"H x 7"W x 18"L WT: 15 lbs UPC: 753759294236

Read more less

SteadyCast™ Heading SensorKnow where you're actually casting. SteadyCast heading sensor is a simple, easy-to-install solution that provides fast calibration and premium heading accuracy. It aligns your boat bow to its actual orientation so you know where you are casting according to your chartplotter screen.Features: Ensures bow orientation on your chartplotter matches your heading Heading accuracy of plus or minus 3 degrees Easy NMEA 2000® plug-and-play interface Simple 2-step calibration process 9-axis MEMS technology allows installation in any orientation located away from magnetic interference Accurate Heading Even at Low SpeedIts heading output rate at 10 Hz and accuracy of plus or minus 3 degrees ensures your chart orientation and boat heading line match up with reality, even at trolling speeds or when dead in the water.Effective in Rough WatersYou can also be confident your heading information will remain accurate, even in rough water.Easy Installation, Fast CalibrationSteadyCast heading sensor installs easily with NMEA 2000® plug-and-play interface and a simple 2-step precision calibration process for compatible Garmin chartplotters. Basic calibration for displays other than Garmin is also supported. Its 9-axis MEMS technology allows installation in any orientation located away from magnetic interference, and it's built to withstand bilge environments.In The Box: SteadyCast heading sensor with integrated NMEA 2000® drop cable (6 ft) NMEA 2000® T-connector Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Output Frequency (mHz): 10Hz Box Dimensions: 3"H x 6"W x 7"L WT: 0.74 lbs UPC: 753759173838

Read more less

RealVision 3D Transducer Extension Cable - 5M(16')RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end.  For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run. Specifications: Type: Extension Box Dimensions: 2"H x 10"W x 10"L WT: 1.5 lbs UPC: 723193817087

Read more less

p70Rs Autopilot Control Head with Rotary KnobRaymarine's p70Rs Autopilot Controller keeps you in command of your SmartPilot autopilot system no matter whether you are cruising, fishing or sailing! Built on Raymarine's ultra-sleek platform, the p70Rs autopilot controller offer boaters an attractive, high-visibility, and simple to operate interface to their Raymarine SmartPilot X-Series and Evolution autopilot systems.The p70Rs offers a convenient rotary control knob and support for multiple autopilot modes including Auto, standby, trolling patterns, and track mode from your GPS or chartplotter. Exclusive to the p70Rs is a convenient Power Steer mode, which enables you to use the p70R's rotary knob like a miniature steering wheel. P70Rs brings convenient, compact steering control to wherever you need it like auxiliary steering stations, flybridges, wing control stations and more. P70Rs features standard SeaTalkng connectivity for simple interfacing with Raymarine SmartPilot X-Series and Evolution autopilot corepacks. The p70Rs features a 3.5" sunlight viewable Liquid Crystal Display. LED backlighting delivers superior visibility day or night and ultra-low power consumption. Like the i70s instrument, the p70Rs feature a clean, modern glass-bridge styling that coordinates with eS and gS-Series multifuction diplays. They also feature all-weather optically bonded displays that deliver brighter colors and sharper contrast. Features: LightHouse user interface is simple and quick to use.Wide 160 viewing angles Start up wizard helps you configure the pilot quickly and easily Anti-reflective coating for improved visibility in bright sunlight Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer Simple system and group dimming/illumination. Support for multiple data sources SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required) Each p70s and p70Rs include both black and gunmetal bezels as well as a fitted soft silicone rubber sun cover, 400mm Seatalkng spur cable, panel gasket, mounting kit and document pack. Specifications: Type: Parts Box Dimensions: 3"H x 7"W x 9"L WT: 1.7 lbs UPC: 723193812310

Read more less

GRF™ 10 Extension Cable (5m)Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 5m to your cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 1"H x 5"W x 6"L WT: 0.66 lbs UPC: 753759989477

Read more less

The Micro Elbow is used in spots where it is impossible to bend a cordset around tight corners. The elbow easily connects to a tee or double-ended cordsets making 90 degree turns practical at the end or anywhere along the line. Mounting hole for secure fastening of cabling system Waterproof seals for reliable connections Nickel plated brass ideally suited for harsh marine environment

Read more less

NMEA 0183 10 Meter Connection CableA 10 Meter NMEA 0183 connection cable specifically for Maretron's SSC200 & SSC300 Solid State Compasses. Specifications: Data Interface: NMEA 0183 Box Dimensions: 2"H x 6"W x 7"L WT: 1.8 lbs UPC: 873804002873 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Mid Double-Ended Cordset - 1 Meter - BlueDouble-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. The connectors are keyed for error-free connection and are waterproof for continued operation even while submerged in the bilge.Features: Rugged, IP68 rated connectors for continued connection integrity in marine environments Various cable lengths to match installatin requirements Optimized for voltage drop sensitive networks (long runs) because power pair wires have half the resistance of Micro cable Color: Blue Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 1m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 1"H x 6"W x 6"L WT: 0.3 lbs UPC: 873804001906

Read more less

HALO® 200X Radar Pedestal Only - 50WSimrad's HALO 200X 50W Pulse Compression Radar: Pedestal Only.

Read more less

Right-Angle Power CablePower the GMR Fantom 5x/12x series radars with this 48 foot (15 meters) long 12 AWG cable. When used with the 100 W Fantom series radar, a voltage converter is required.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 3"H x 8"W x 9"L WT: 5.15 lbs UPC: 753759189907

Read more less

GPS 24xd GPS Antenna w/ Heading Sensor - NMEA 2000 EXPLORE COASTAL WATERSThe GPS 24xd position receiver and antenna gives you precise location with multi-band GNSS and heading accuracy even at slow speeds. Navigate in more locations with expanded GNSS support.  Get high-sensitivity tracking with fast GPS update rate.  Accurately pinpoint your heading — regardless of speed. It’s water-resistant (IPX7) to withstand the elements. Install it easily with multiple mounting options.  The antenna is compatible with NMEA 2000® devices. Multi-Band GNSSMulti-band GNSS provides location accuracy to within 1 meter to compatible marine multifunction displays, instrument displays and autopilots.Magnetic HeadingThe magnetic heading sensor provides accuracy to within 3 degrees, stabilizing charts, radar overlay and MARPA even at slow speeds.High-Sensitivity GPSFast 10 Hz position update rates provide high-sensitivity position, velocity and time data.Expanded GNSS SupportGPS 24xd provides access to four key global navigation satellite systems (GPS, Galileo1, GLONASS and BeiDou1) to more accurately track in challenging conditions than GPS alone.Multi-SBAS CompatibleMulti-SBAS compatibility corrects signal measurement errors and provides information about the accuracy, integrity, continuity and availability of its signals.Mounting OptionsInstallation is easy with under-deck, pole and surface-mount options.In The Box: GPS 24xd NMEA 2000® Pole mount Surface mount Under deck mount NMEA 2000 backbone/drop cable (6 meters) NMEA 2000 T-connector Documentation Specifications: Type: Antennas Box Dimensions: 7"H x 7"W x 7"L WT: 2.15 lbs UPC: 753759248215 Owner's Manual (pdf)

Read more less

Protective Cover f/ECHOMAP Ultra 12" Use our cover to protect your compatible ECHOMAP Plus from the harsh marine environment when not in use. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 1"H x 10"W x 14"L WT: 0.6 lbs UPC: 753759218386

Read more less

GT15M-TM Transom Mount Transducer - 8-PinGT15M-TM transducer is perfect for fishermen who want clear bottom definition under the boat as well as crisp, clear and wide fish arches with excellent target separation to depth up to 1,900 feet.The 8-pin transducer features mid-band CHIRP traditional sonar (85-165 kHz) and has a power rating of 600 W. It can be mounted on the transom.Follow the included installation instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: No Pins: 8 Mounting Style: Transom Imaging: Standard Chirp: Medium Cable Length (Feet): 20' Box Dimensions: 4"H x 6"W x 7"L WT: 1.4 lbs UPC: 753759174484

Read more less