3-Way Auto/Off/Manual Bilge Pump SwitchPart #: 7615A3Panel-mounted rocker switches for use with pump that draws 10 amps or less.Features: 1/4" spade terminals 6-volt through 32-volt D.C. only 10 amps maximum Plate is 2-13/16" x 1-7/8" Hole size is 1-1/2" x 7/8" Caution: Bilge pump switches are not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12/24v Type: Switches Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 022697761590 Quick Guide (pdf)

Read more less

Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service  GPH (Gallons Per Hour): 1200 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 5 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 1" and 1-1/8" *Must be used with appropriate Tsunami outlet Specifications: Gallons Per Hour: 1200 GPH Gallons Per Minute: 20 Operation: Non-Automatic Outlet Size: 1" or 1-1/8" Type: Pumps/Drives Volts: 12v Box Dimensions: 4"H x 5"W x 7"L WT: 1.25 lbs UPC: 022697024152 Quick Guide (pdf)

Read more less

Automatic Submersible Bilge Pump - Electromagnetic Switch01604-00 Heavy-Duty, high-performance pump Exceeds the tough demands of commercial and recreational duty Liquid Cooled 12-Pole motor with double ball bearings Lip Seal design construction Prewired with automatic float switch(with Manual Over-ride Operation) Optional and removable check valve included 1-1/8" & 1-1/4" hose adapters included 3 year warranty Specifications: Gallons Per Hour: 1600 GPH Operation: Automatic Outlet Size: 1-1/8" or 1-1/4" Volts: 12v Type: Electric Box Dimensions: 8"H x 8"W x 8"L WT: 4.25 lbs UPC: 729321916608

Read more less

Rule 3700Automatic 12vHeavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet.WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 3700 GPH Operation: Automatic Outlet Size: 1-1/2" Volts: 12v Type: Electric Box Dimensions: 7"H x 8"W x 12"L WT: 7.5 lbs UPC: 042237083050 Owner's Manual (pdf)

Read more less

Ultima Bilge PumpUltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port. For UltimaBilge 1250GPH we include threaded 1.1/4" & 1.1/8" discharge port. All version are delivered with a removable check valve.The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.CE-ApprovedFeatures: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 51 l/min - 800 GPH Capacity straight (13.6 V): 79 l/min - 1250 GPH Amperage: 3 A Fuse Size: 5 A Connection: 1-1/8" and 1-1/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:117 mm - 4.6" Weight:0.66 kg - 23.3 oz. Specifications: Gallons Per Hour: 1250 GPH Operation: Automatic Outlet Size: 1-1/4" or 1-1/8" Volts: 12v Type: Electric Box Dimensions: 4"H x 8"W x 9"L WT: 1.5 lbs UPC: 729321472616 Owner's Manual (pdf)

Read more less

Replacement Strainer BaseReplacement Strainer Base f/Round Rule Pumps w/Flow Rate 1500-2000gphWARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Strainers Box Dimensions: 3"H x 6"W x 7"L WT: 0.15 lbs UPC: 042237085634

Read more less

Replacement Strainer BaseRule-Mate Bilge Pumps RM500A-RM1100A GPH Models (Post 2009). Specifications: Type: Strainers Box Dimensions: 3"H x 5"W x 9"L WT: 0.15 lbs UPC: 042237115522

Read more less

Rule-A-Matic® Float SwitchYear after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire. Designed for pumps drawing up to 14 Amps. Now includes a 2 year warranty.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12, 24, 36v Type: Switches Box Dimensions: 3"H x 5"W x 9"L WT: 0.4 lbs UPC: 042237095435 Owner's Manual (pdf)

Read more less

Aqua Void 500 GPH Bilge Pump - 12VWith its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.Experience the Industry-First Quick-Change Motor ConnectionJohnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.Take Control of the Boating Experience with Unparalleled ConvenienceThe Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.Enjoy Enhanced Efficiency and Higher Flow RatePowered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.Trust in Reliable Performance Under Demanding ConditionsJohnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!Features: Heightened efficiency with an increased flow rate - high-flow impeller design  Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires Water-cooled motor for long service intervals Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve Meets the international standard, ISO 8849 marine Molded T-Slot - Easy Installation with Switches Specifications: Pump Size: 500 GPH Capacity Straight (12V): 600 GPH (38 I/min) Voltage: 12V Amp: 2.7A Fuse: 3.5A Hose Connection: 3/4 in. Wire Size: 16 GA, TAC Weight: 11.2 oz (0.32 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm) Specifications: Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" Type: Pumps/Drives Volts: 12v Box Dimensions: 4"H x 5"W x 5"L WT: 1 lbs UPC: 7330717015114 Quick Guide (pdf)

Read more less

Amazon Bulkhead Manual Bilge PumpFeatures: Connections: – for 25mm (1”) bore hose Dimensions: – 250mm long, 170mm wide, 120mm high, with 260mm handle (nominal dimensions for variable pump configuration) Output: – up to 45 litres/minute (10 gallons/minute) For surface mounting on bulkhead or deck. Light compact pump. Ports and bodies can be positioned in 96 different ways for maximum flexibility of installation. Stainless steel handle with bulkhead clips. Self-priming up to 4m. Packaged Dimensions: L:23.00 x H:16.00 x W:21.00cm Actual Weight: 0.96 Kg  (Approx. 1.26 Kg packed)

Read more less

Sea Kayak Pump w/Float-a-Pump SleeveDesigned specifically with the Sea-Kayaker in mind, this upgraded version of our popular Canoe Pump includes an aluminum reinforcing shaft which prevents the pump shaft from flexing in a rolling sea and won't affect a compass. A hose can be added for extended discharge. The installed Float-a-Pump provides positive flotation for pumps dropped overboard.Features: Diameter: 1-3/4" Length: 18" Strokes per Gallon: 8 strokes Gallon per minute: 8 gallons Mounting clips sold separately WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 480 GPH Gallons Per Minute: 8 GPM Type: Manual Box Dimensions: 3"H x 4"W x 20"L WT: 0.7 lbs UPC: 021083008776

Read more less

IC Retail Kit 24V Gulper IC Pump & Strainer ICAt the heart of every Whale IC product lies innovative electronic control circuitry.This enables IC sensor accessories to communicate directly with IC pumps to control their performance.Features & Benefits: Save time and money by reducing four separate components to one pre-wired system. Remote mounting automatic Gulper IC receives signals from Strainer IC and switches on and off automatically Pre-wired and assembled - just connect power Remote mounted pump for easy inspection- high, dry and protected Soft start - protects the pump for long life Small footprint strainer fits into very confined bilge spaces Low current controlled switching - no switch failure from high currents On/off delay - prevents cycling Environmentally friendly - no mercury Time delay to allow for optimum drainage Override wire included to allow for manual activation Non-choke valves - no filter to block/clean Long life - pump self primes and runs dry without damage WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Type: Electric Box Dimensions: 7"H x 8"W x 12"L WT: 5.2 lbs UPC: 766478945709

Read more less

Aqua Void Automatic 800 GPH Bilge Pump - 12VWith its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.Experience the Industry-First Quick-Change Motor ConnectionJohnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.Take Control of the Boating Experience with Unparalleled ConvenienceThe Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.Enjoy Enhanced Efficiency and Higher Flow RatePowered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.Trust in Reliable Performance Under Demanding ConditionsJohnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!Features: High-flow impeller design Quick-change motor connection Switchless automatic bilge pump with low-amp resistance monitoring Durable thermoplastic housing design commonality with removable motor cartridge Smaller profile than pumps with switches Straight or 90-degree dura port discharge ports with an included check valve Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings Clip-in basket Benefits: Heightened efficiency and an increased flow rate Enjoy quick and hassle-free cartridge motor changes or capacity upgrades Automatically monitors the presence of water through low-amp draw impeller spin The common body allows interchangeable motor cartridge replacement to the same or different size For tighter fit in smaller spaces Allow multi-directional hose routing, eliminate stress cracking without disengaging hoses or removing pumps, and reduce cycling from water backflow Corrosion-resistant and extended life Competitive Advantages: The most efficient and highest flow in the GPH capacity category Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires 100 days of service before critical battery draw down* Automatically monitors the presence of water through low-amp draw impeller spin Ease of installation & maintenance Specifications: Pump Size: 800 GPH Capacity Straight (12V): 795 GPH (50 I/min) Voltage: 12V Amp: 3.7A Fuse: 5A Hose Connection: 3/4 in. Wire Size: 16 GA, TINNED Weight: 12.6 oz (0.36 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm) Specifications: Gallons Per Hour: 800 GPH Operation: Automatic Outlet Size: 3/4" Type: Pumps/Drives Volts: 12v Box Dimensions: 4"H x 5"W x 6"L WT: 1.2 lbs UPC: 7330717018191 Quick Guide (pdf)

Read more less

Submersible Electric Galley Pump - 12VWhale electric galley pump range includes models with the very latest electronic technology. All pumps are manufactured from only highest quality inhouse molded parts and robust motors.We have developed our pump designs based on more than 60 years of expertise. Today we have used that experience to develop our most compact, quiet lightweight high performance electric impeller pumps.Features and Benefits Simple, compact and an economical solution Long life, very quiet with low power consumption An inexpensive way to update a manual to an electric system Suitable for use with pressure switch and microswitch systems Specifications: Volts: 12v Outlet Size: 3/8" Type: Electric Gallons Per Minute: 3.48 GPM Box Dimensions: 2"H x 7"W x 10"L WT: 0.5 lbs UPC: 766478942159

Read more less

Filterless Bilge/Sink/Shower Drain Pump - 4.2 GPM - 24VSelf-priming diaphragm pump 24V DC.Features: Connections: - for 19mm (¾”) bore hose. Dimensions: - 294 mm long, 159mm wide, 132mm high Fuse Size: - 5(amp) Maximum Current: - 2.5(amps) Output - up to 16 litres/minute (3.5 gallons/minute). Maximum recommended total head 6m Robust, quiet single diaphragm design No strainer required Single diaphragm design allows extended dry running Self-primes up to 3m (9.5ft) vertical lift Multi-positional ports for easy mounting Rated for up to 30 minutes of continuous running Actual Weight: 2.98 Kg  (Approx. 3.48 Kg packed) WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4.2 GPM Inlet Size: 3/4" Operation: Non-Automatic Outlet Size: 3/4" Rinse Water: Raw/Fresh Suction Lift (ft.): 9.5' Type: Pumps/Drives Volts: 24v Box Dimensions: 6"H x 8"W x 14"L WT: 6.8 lbs UPC: 671880581578

Read more less

Gulper Grouper Fishbox Evacuation Pump 24VNon clog no filter waste pumps built on more than a decade of market leading pump technology.Replace your macerator with the ultimate fishbox waste pump - Gulper Grouper - the non choke fishbox waste box suits standard 1"/ 1 1/2" hose connectionsFeatures You can depend on diaphragm pump technology : No impeller to clog or burn Non-choke valves - easily handle fishbox waste Save money - Single pump for multiple wells Easy to install - 360 degree head rotation and choice of 1" or 1 1/2" hose connections to suit your installaton needs Easy to maintain and clean Ideal replacement for macerator pumps Fast pump out - up to 6.75 US gals/ 25.5 ltrs per minute Long term durability - runs dry without damage Fit in convenient locations - Multi-directional head position Save battery - Low power consumption WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Minute: 6.75 GPM Inlet Size: 1" or 1-1/2" Outlet Size: 1" or 1-1/2" Suction Lift (ft.): 1.7' Volts: 24v Box Dimensions: 7"H x 8"W x 12"L WT: 5.35 lbs UPC: 766478942401

Read more less

Stainless Steel Debris StrainerExtra measure of protection for use on round based Rule pumps up to 3700 GPH (14010 LPH). Installs directly into existing strainer. Filters out excess debris and helps prevent jamming and failure.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 2"H x 3"W x 6"L WT: 0.05 lbs UPC: 042237084293

Read more less

Heavy-Duty Bilge Pump 2000 SeriesPart #: 4760-4Heavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.Attwood's highest capacity pump! Ball-bearing design provides for cooler motor operation and longer life, Delivers over 2000 GPH at open flow while drawing less than 7-amps.Features: 12V CE Rated 36" Wire 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 6"H x 7"W x 7"L WT: 2.4 lbs UPC: 022697476043 Quick Guide (pdf)Brochure (pdf)

Read more less

400 GPH 12V Bilge Pump - Barbed PortA small, price-wise alternative in the submersible bilge family. The low-cost choice for boat owners who do not want to forsake quality.Features: Capacity straight (13.6V/27V): 30 I/min. - 475 GPH Voltage: 12 V DC Amperage: 2.5A Fuse Size: 3 A Connection: 3/4" Max height: 100mm - 4" Weight 0.35kg - 12oz CE-Approved Barbed Port Specifications: Type: Electric Box Dimensions: 4"H x 4"W x 5"L WT: 0.7 lbs UPC: 729321214056

Read more less

4-Zone Dry Bilge System Add-OnThe 4-Zone Splitter is the perfect companion to the Dry Bilge System, enabling powerful suction from up to four separate zones to keep your bilge dry and clean. Designed for ease of use and durability, this splitter is ideal for marine and yacht applications, ensuring efficient water removal to prevent mold, mildew, odors, and hull damage. Its quick-connect fittings allow for simple and seamless installation, while the ignition-protected design ensures safe use in marine environments.With its high-impact, durable plastic housing and precise engineering, the 4-Zone Splitter is a long-lasting addition to your dry bilge system. Note that this splitter must be paired with the Dry Bilge System (CM-33-DBS) to operate effectively.CAUTION: This product is designed as a supplemental low-flow system and is not a replacement for conventional bilge pumps. It should never be relied upon to maintain vessel flotation.Features: 4-Zone Suction Capability: The splitter connects your COMMODORE Dry Bilge System to up to four separate zones, ensuring comprehensive water removal and a cleaner, drier bilge. Quick-Connect Fittings for Easy Installation: Designed with quick-connect fittings, the splitter makes plumbing connections seamless and efficient, saving you time during setup. High-Impact Durable Plastic Housing: Built to withstand harsh marine environments, the housing ensures durability and long-lasting performance. Prevents Mold, Mildew, and Odors: Keeps your bilge dry to prevent the growth of mold and mildew while eliminating musty odors and protecting hull integrity. Compact Design for Tight Spaces: Its lightweight and compact form allows for flexible installation in limited spaces on marine vessels and yachts. Safe for Marine Environments: The splitter is ignition-protected to meet ISO 8846 Marine standards, ensuring safe use in engine compartments and other critical areas. Works Exclusively with Commodore Dry Bilge Systems: Specifically engineered to integrate seamlessly with the CM-33-DBS for optimal performance and reliability. Specifications:Weight: 1.00 lbs Specifications: Gallons Per Minute: 3 Volts: 12 Box Dimensions: 8"H x 9"W x 12"L WT: 8.3 lbs UPC: 817683023215

Read more less

Hand Bilge Pump 36" x 72"These Manual Bilge Pumps are designed for use in small boats without electrical power or larger boats in emergencies where power is no longer available. Compact, lightweight, and easy to stow. A foot valve is removable for easy cleaning. Capacities from 6-13 GPM. Pumps feature removable hoses and storage clips. The hose must be screwed in to prevent leaks, NOT pushed in, and constructed of durable UV-resistant injection molded nylon.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Manual Box Dimensions: 8"H x 8"W x 43"L WT: 2.8 lbs UPC: 035514503068

Read more less

Dry Bilge System 3.0 GPMKeeps your bilge bone-dry!Features: Equipped with built-in programmable timer for automatic usage Removes all still water from the bilge Simple installation Keeps your bilge clean and dry Preserves hull integrity Helps prevent mold, mildew, mustiness, odors, and rot 25' self-priming suction allows the system to be remotely mounted User programmable timer allows the user to activate the system as much, or as little, as needed  A thin 8mm suction hose allows for easy bends and fits into tight spaces An Automatic-Off-Manual toggle switch allows the user to activate the system manually in addition to automatically Quick-connect fittings allow for simple plumbing installation High absorption suction base ensures a dry bilge Ignition Protected - ISO 8846 Marine/SAE J1171 Marine Can suction up to 4-zones with a multi-zone splitter (sold separately) Specifications: Gallons Per Minute: 3 Operation: Automatic Volts: 12 Box Dimensions: 7"H x 8"W x 13"L WT: 8 lbs UPC: 817683023208

Read more less

Kayak Hand Bilge Pump This Attwood Hand-Operated Bilge Pump quickly and safely removes unwanted water and other liquids from small craft such as kayaks, canoes, and small fishing boats. This pump can remove up to 8 gallons per minute, and no hose is required. The pump is an 18-inch-long pump and has an ergonomic hand grip that keeps the pump afloat if dropped into the water.Features: Ideal for small craft such as kayaks, canoes, and small fishing boats (inch) 18" long Sturdy, impact-resistant, and lightweight plastic construction *No hose is required Specifications: Gallons Per Minute: 8 Operation: Non-Automatic Box Dimensions: 4"H x 4"W x 21"L WT: 3.7 lbs UPC: 022697115959

Read more less

Bilge Pump - 800/1100 GPH - Automatic The TRAC 69311 Automatic Bilge Pump is a submersible 600 GPH pump.  This automatic, self-priming bilge pump is ideal for all watercraft.  It is ignition protected, has a low power draw and can run dry without damage.  Designed for easy installation and retrofitting, the bilge pump has a cartridge-style pump head and universal strainer base.  This automatic bilge pump has an integrated float switch that allows for automatic ON/OFF functionality. Universal strainer base is connection-compatible to fit Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps. Screw mounting holes match Rule and Attwood Tsunami.  Features: Cartridge style pump head Pump body accepts both 3/4” and 1-1/8” screw-on outlets.  Each outlet has an O-ring for easy maneuverability without stripping Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Automatic Flow Rate (3/4" outlet) - 800 GPH Flow Rate (1-1/8" outlet) - 1100 GPH Discharge Outlet - 3/4" and 1-1/8" Voltage - 12 V *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 800/1100 GPH Gallons Per Minute: 10/18.33 Volts: 12v Outlet Size: 3/4" or 1-1/8" Type: Pumps/Drives Operation: Automatic Box Dimensions: 4"H x 7"W x 8"L WT: 1.05 lbs UPC: 666996100126 Owner's Manual (pdf)

Read more less

Bilge Float Switch - 12/24/30VThe 12/24/30V bilge float switch activates your bilgepump automatically when water exceeds the acceptable level and deactivate when water has been removed.For a fully automatic removal of your bilge water connect a switch to your electrical bilge pump. Safe removal of bilgewater when nobody is onboard, approved for 500 000 cycles. 14A fuse.Features:Electric SwitchSpecifications:Weight: 0.13 kg/.25 lbs*CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Switches Volts: 12/24/32v Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs UPC: 7340176600240

Read more less

Bilge Pump Heavy Duty 1750 GPH - 12VSubmersible heavy duty bilge pump 12V with pump capacity 110 L/min (1750 GPH) and 85 L/min (1350 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design.Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. Features: Heavy Duty Submersible For pleasure or commercial boats above 10m (30Ft) length  Interchangeable with Rule 1500, Johnson Pump 16004-00 /32-1600-01 Specifications: Weight: 0.7 kg/1 lb Dimensions: 150/6L x 170/6.7H x 130/5W mm/in  Fuse: 6A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Electric Gallons Per Hour: 1750 GPH Gallons Per Minute: 29 GPM Operation: Non-Automatic Outlet Size: 1-1/4" or 1-1/2" Volts: 12v Box Dimensions: 6"H x 7"W x 8"L WT: 4.6 lbs UPC: 7340176600103

Read more less

Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service  GPH (Gallons Per Hour): 800 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 4 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet Specifications: Gallons Per Hour: 800 GPH Operation: Non-Automatic Outlet Size: 3/4" or 1" Type: Pumps/Drives Volts: 12v Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs UPC: 022697023988 Quick Guide (pdf)

Read more less

Rule 2000Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features: Computerized operation - no float switch required Fully Submersible Easy clean triple stage snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Operation: Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 7"H x 8"W x 11"L WT: 4 lbs UPC: 042237083159 Owner's Manual (pdf)

Read more less

Gusher Titan Manual Bilge Pump Thru Deck/BulkheadGusher Titan is Whale's tough lightweight proven pump. A design that has been tried tested and trusted by sailors for decades.Whale's high performance lightweight model.Features High flow rate: 105 ltrs (28 US gals) per minute Clamp ring easily removed for pump head rotation Tough yet lightweight proven design 2 mounting options - bulkhead and thru deck models Quick maintenance - Clamp ring easily removed for pump head rotation Typical Uses: bilge pump out, Holding tank pump out, Toilet flush Ease of operation - Self priming and spring assisted outlet valve Straight forward installation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 1680 GPH Gallons Per Minute: 28 GPM Type: Manual Box Dimensions: 8"H x 9"W x 12"L WT: 5 lbs UPC: 766478441003

Read more less

ECO-SwitchThe Rule ECO-Switch is an ecologically sound automatic bilge pump control control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached to switch. This air pressure activates the switch which controls your pump. There are no moving internal parts, all wiring is out of the water, and there are no submerged electrical connections at all. Offering complete reliability and outstanding performance, the Rule ECO-Switch offers a viable alternative to traditional float switches.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Type: Switches Box Dimensions: 4"H x 6"W x 10"L WT: 0.6 lbs UPC: 042237085184 Owner's Manual (pdf)

Read more less

EBSN 10 Amp Electric Switch f/Bilge PumpFeatures Operation managed by microcontroller. Advanced digital filter to distinguish the presence of water. Extended power supply range. Remote indication of operation status by led or remote control panel (optional). Manual remote pump switch-on by button or remote control panel (optional). Signal for prolonged bilge pump switch on (if led or remote control panel is installed). Protection against excessive battery rundown. Switch-on/switch-off delay to avoid false switch-on/switch-off cycling of the pump caused by the roll of the boat. Functioning over a wide range of environmental temperatures. Resin-coated watertight casing. Easy installation. Specifications: Volts: 12/24v Type: Switches Box Dimensions: 3"H x 5"W x 7"L WT: 1.15 lbs UPC: 8057090045116

Read more less

Triple Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.  An environmentally friendly low-profile bilge water pickup design with a replaceable filter system.  Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water. BBD Triple Pump 12VDC:Three motors/diaphragm pumps20 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU) - 3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup. BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications:Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:  12 VDC (8 – 14 VDC)  Max current: 1.0 amps (12 VDC)  Idle Current: 0.05 amps (12 VDC)  Pump:  Maximum flow: 0.75 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L  Weight 2.2 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higher

Read more less

2000 GPH Automatic AMP Sensor Bilge Pump - 24VThe 2000 GPH Automatic Bilge Pump is designed for superior performance, durability, and convenience. With a high flow rate of 2000 GPH and innovative electronic sensing technology, this pump operates without the need for an external float switch. The advanced design checks for water every 2.5 minutes and activates only when necessary, ensuring efficient water removal. Its quick-connect system allows for easy maintenance and replacement, while robust construction ensures reliability in harsh marine environments. Whether you’re replacing or upgrading your bilge pump, the 2000 GPH model offers unmatched performance and ease of use.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Advanced Automatic Operation: Innovative electronic sensing technology activates the pump only when water is detected. The pump checks for water every 2.5 minutes, running for just 0.5 seconds to conserve energy. High-Performance Flow Rate: Capable of pumping up to 2000 GPH, this pump quickly clears bilge water, even in demanding marine conditions. Anti-Airlock Protection: Features a vented impeller housing that prevents airlock, ensuring consistent and reliable performance at all times. Durable Marine-Grade Construction: Built with a stainless-steel motor shaft, exclusive moisture-tight seals, and marine-grade blocked wiring for long-lasting performance in harsh environments. Dual Outlet Options: Includes both straight and 90-degree fittings for 1-1/8 inch hoses, ensuring flexible compatibility with various installations. Built-In Check Valve: Prevents water backflow into the bilge, maintaining a dry environment and enhancing overall efficiency. Specifications: Weight: 1.71 lbs Flow rate: 2000 GPH (Gallons Per Hour) Volts: 24V Current: 7.5A Head: 18.04' (5.5m) Outlet Diameter: 1-1/8 inch (29mm) Included Components: Standard straight fitting (1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect plumbing and wiring Specifications: Gallons Per Hour: 2000 Operation: Automatic Outlet Size: 3/4" & 1-1/8" Volts: 24 Box Dimensions: 4"H x 6"W x 6"L WT: 2 lbs UPC: 817683023482

Read more less

2000 GPH Non-Automatic Bilge Pump - 12VThe 2000 GPH Non-Automatic Bilge Pump is engineered for superior performance, durability, and ease of maintenance. Designed for marine applications, this high-capacity pump operates via a separate float or panel switch, providing complete user control. Its advanced anti-airlock technology, moisture-tight seals, and stainless-steel motor shaft ensure consistent operation even in the harshest marine conditions.Featuring a quick-connect design, the pump, base, and wiring can be replaced in seconds without disrupting plumbing connections. The robust impeller design, combined with its high-efficiency motor, delivers exceptional water evacuation while operating quietly with low energy draw. Dual-size straight and 90-degree outlet fittings provide flexibility for a variety of installation setups.Whether you’re upgrading or maintaining your bilge system, the CM-A31-2000B ensures reliable and hassle-free performance, meeting the highest safety and marine standards.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Powerful Water Evacuation: Delivers a high flow rate of 2000 GPH, efficiently clearing large volumes of water to keep your bilge dry and safe in critical conditions. Non-Automatic Operation: Requires a separate float switch or manual panel switch, giving boat owners full control over when the pump activates. Anti-Airlock Technology: The advanced impeller design prevents airlocks, ensuring smooth and uninterrupted operation in any marine environment. Dual Outlet Compatibility: Includes both straight and 90-degree fittings for 1-1/8 inch hoses, offering flexibility for various plumbing configurations. Marine-Grade Durability: Features a high-efficiency motor with a stainless-steel shaft, exclusive moisture-tight seals, and marine-grade blocked wiring for long-lasting reliability. Meets Safety Standards: Fully submersible and ignition protected, meeting or exceeding ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for safe marine operation. Quiet and Energy-Efficient Operation: The high-efficiency motor operates quietly with a low amp draw, minimizing power consumption without sacrificing performance. 4-Year Warranty: Backed by Commodore’s 4-year warranty, ensuring dependable operation and peace of mind for marine enthusiasts. Specifications: Voltage: 12V Flow Rate: 2000 GPH (Gallons Per Hour) Outlet Diameter: 1-1/8 inch (29mm) Current: 7.5A (12V) / 4.0A (24V) Head: 18.04 ft (5.5m) Unit Weight: 1.71 lbs (0.78 kg) Included Components: Dual-size straight fitting (1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect wiring for hassle-free setup Specifications: Gallons Per Hour: 2000 Operation: Non-Automatic Volts: 12V Box Dimensions: 4"H x 6"W x 6"L WT: 2 lbs UPC: 817683022980 Brochure (pdf)

Read more less

1100GPH Standard Bilge Pump - 12VCustomers talk about flow, they want the water out of the bilge, andfast. Improved design and performance means that our next generation 1100GPH pump will produce this flow at just 24V rather than 27.2V as previously required...more typical of on board voltage supply.Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting startedFeatures: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 1100 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 24v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104762 Brochure (pdf)

Read more less

500GPH Electronic Sensing Bilge Pump - 24VIn the next generation sensing bilge pumps, the 500GPH 24V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!All that plus the added benefits of our standard bilge pump: Check valve included with hidden air vent to prevent airlocking True electromagnetic suppression (EMC) A built-in thermal cell that protects the pump and the vessel when things get too hot These are the smallest automatic pumps available on the market!!!Features: Completely automatic with manual override - No Float Switch Needed! Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 500 GPH Operation: Automatic Volts: 24v Box Dimensions: 4"H x 7"W x 7"L WT: 1 lbs UPC: 042237104793

Read more less

High Flow Submersible Electric Galley Pump - 12VWhale electric galley pump range includes models with the very latest electronic technology. All pumps are manufactured from only highest quality inhouse molded parts and robust motors.Whale has developed the pump designs based on more than 60 years of expertise. Today Whale has used that experience to develop the most compact, quiet, lightweight high performance electric galley pumps.Features: Simple and compact High flow submersible Ideal for up to 2/3 mixer outlets 15.8 liters per minute maximum flow rate 3.8 Amps power consumption 12V Specifications: Type: Electric Volts: 12v Box Dimensions: 2"H x 8"W x 10"L WT: 0.5 lbs UPC: 766478942173

Read more less

Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 24VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service  GPH (Gallons Per Hour): 800 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 24V Fuse Size: 2 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet Specifications: Gallons Per Hour: 800 GPH Operation: Non-Automatic Outlet Size: 3/4" or 1" Type: Pumps/Drives Volts: 24v Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs UPC: 022697024121 Quick Guide (pdf)

Read more less

Little Pal Utility PumpCompact polished brass multi-purpose hand pump Ideal for small engine and gearbox oil drain Simply pump old oil out with dipstick probe Oil and corrosion resistant brass and neoprene construction with up to 1 gpm output Small enough to fit any tool box WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 1 GPM Outlet Size: 1/2" Type: Manual Box Dimensions: 2"H x 8"W x 11"L WT: 1 lbs UPC: 671880028622 Quick Guide (pdf)

Read more less

MK5 Universal Manual Bilge PumpSince the 1940s Whale engineers have refined our manual bilge pump designs and completed extended life testing - the result? Whale's iconic manual bilge pump range.This clever bilge pump design allows great versatility in installation so that you can fit the pump in the orientation to best suit your boat.Features Whale's most versatile high performance pump design 3 mounting orientations - 1 pump- (on-deck, thru-deck, on-bulkhead) High Performance - flow rate (66 ltrs / 17.5 US gals / min) Reliability - non choke valves and fully enclosed protected diaphragm Ease of maintenance - inspection hatch(no tools required) Suitable for pumping bilge water,saltwater or diesel WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 1050 GPH Gallons Per Minute: 17.5 GPM Type: Manual Box Dimensions: 8"H x 9"W x 13"L WT: 3.9 lbs UPC: 766478051004

Read more less

18A Float SwitchThe 02-Series Automatic Float Switch transforms any manual bilge pump into an efficient and reliable automatic system. Designed with a unique ball-bearing activation mechanism, this float switch provides superior reliability and longevity compared to traditional reed switches. Built to handle bilge pumps with a maximum current draw of 18A, the switch is compatible with 12V, 24V, and 32V DC systems, making it versatile for a variety of marine applications.Fully submersible and made with high-quality ABS material, the switch is sealed using ultrasonic welding to ensure leak-proof operation. With a compact design and straightforward installation, it seamlessly integrates into any marine system. The ignition-protected construction and mercury-free design guarantee safe and eco-friendly performance, while its long lifespan ensures consistent operation through millions of cycles.Features: Converts Manual Bilge Pumps to Automatic: This float switch transforms any compatible bilge pump into an automatic system, activating the pump when water levels reach 2.36 inches and deactivating it at 1.18 inches. Unique Ball Bearing Design: Features an internal weighted ball bearing activation mechanism for superior reliability and smoother operation compared to traditional reed switch designs. Fully Submersible and Leak-Proof: Constructed with high-quality ABS material and sealed using ultrasonic welding, the switch is both durable and fully submersible for tough marine environments. Mercury-Free and Eco-Friendly: Designed without mercury, ensuring safe operation for the environment while complying with international marine safety standards. High Current Capacity: Handles up to 18A at 12V, making it compatible with a wide range of bilge pumps and ideal for demanding marine applications. Easy Installation: The compact and user-friendly design allows for straightforward installation, reducing setup time and effort. Long-Life and High Switching Frequency: Built to withstand up to 10 million cycles, this switch ensures dependable performance for years of use. Ignition-Protected Construction: Meets ISO 8846 Marine standards, making it safe for installation in engine compartments or confined spaces. Specifications: Wire Load: 3 ft. Dimensions: 7.68" x 5.71" Weight: 0.29 lbs Specifications: Operation: Automatic Box Dimensions: 2"H x 5"W x 8"L WT: 0.5 lbs UPC: 817683022942 Brochure (pdf)

Read more less

LoPro 900GPH Bilge Pump - AutomaticThe Rule LoPro™ 900 Automatic is a fully automatic low profile Bilge Pump with a 900 gallons per hour capacity. Designed for tight spaces, the height of the pump is only 2-1/4".It features a threaded discharge nozzle to which you can attach either a straight or a 90° fitting (included). In addition, you may use the tricuspid check valve (included) on the straight fitting to minimize the back flow of water. The entire discharge body swivels up to 180° for ease of installation. The hose attached can also swivel 360° to route the hose perfectly. The pump features a sensing switch to control the pump. Unique to this pump are two settings, a high setting where the pump turns on when the water reaches 1-3/4" and a low setting where the pump turns on when the water reaches 1".Features: 900 GPH Low Profile Bilge Pump Fits into hard to reach places Fully Autuomatic- two settings available, high and low Threaded discharge ports with mulitiple fittings available Features a tricuspid check valve to minimize back flow of water 3 Year WarrantyWARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Operation: Automatic Gallons Per Minute: 15 GPM Gallons Per Hour: 900 GPH Type: Electric Box Dimensions: 4"H x 8"W x 12"L WT: 1.7 lbs UPC: 042237114372 Brochure (pdf)

Read more less

1100 GPH 60 Series Automatic Bilge Pump - 12VThe 1100 GPH 60-Series Automatic Bilge Pump is the ultimate all-in-one solution for boat owners seeking powerful, reliable, and efficient water removal. Featuring a built-in float switch, this automatic bilge pump eliminates the need for additional components, activating only when water levels rise and shutting off when the bilge is clear. Designed to withstand harsh marine environments, it comes equipped with a high-torque motor, advanced seals, and an anti-fouling impeller for superior longevity and performance.Maintenance is simplified with a snap-off strainer base for easy cleaning and a quick-connect wiring system, allowing the motor cartridge to be replaced in seconds. Built to meet ISO 8846 and ISO 8849 standards, the 1100 GPH bilge pump is fully submersible and ignition-protected, providing unmatched safety and reliability on the water.Features: All-in-One Automatic Design: The Integrated float switch detects rising water levels and automatically activates the pump, shutting off when the bilge is clear. No separate float switch is needed, simplifying installation. Powerful and Reliable Performance: With a flow rate of 1100 GPH and a high-torque motor, this pump ensures fast and efficient water evacuation, keeping your bilge dry and safe. Anti-Fouling Impeller and Debris Protection: The advanced impeller design resists fouling, while the snap-off strainer base protects the impeller and float switch from debris, ensuring smooth operation. Quick-Connect Motor Cartridge: Replace the motor in seconds without the need to remove the base or plumbing. This user-friendly feature simplifies maintenance and minimizes downtime. Oil-Resistant Activation: Will not activate in the presence of straight motor oil, ensuring accurate water detection and preventing unnecessary operation. Meets Marine Safety Standards: Fully submersible and ignition protected, this pump meets or exceeds ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for safety and performance. Compact and Lightweight Design: With dimensions of 6.14 x 3.62 x 4.57 inches and a weight of only 1.33 lbs (0.6 kg), this pump is easy to install and fits in tight bilge spaces. 4-Year Warranty: Backed by Commodore's industry-leading 4-year warranty, providing peace of mind and reliable operation. Specifications: Voltage: 12V Flow Rate: 1100 GPH (Gallons Per Hour) Outlet Diameter: 1-1/8 inch (29mm) Current: 3.0A (Max Draw: 6.0A) Wire Lead: 3 feet (1 meter), 18 AWG Weight: 1.02 lbs (0.47 kg) Why Choose the Commodore 1100 GPH Automatic Bilge Pump?The Commodore 1100 GPH Bilge Pump is a premium solution for boat owners seeking reliable automatic bilge management. With its all-in-one design, built-in float switch, and superior debris protection, this pump guarantees efficient and hassle-free operation. Its robust construction, ease of maintenance, and compliance with marine safety standards make it the perfect companion for any watercraft. Specifications: Gallons Per Hour: 1100 Operation: Automatic Outlet Size: 1-1/8" Volts: 12 Box Dimensions: 4"H x 5"W x 6"L WT: 1.3 lbs UPC: 817683023079 Brochure (pdf)

Read more less

1100 GPH Non-Automatic Bilge Pump - 12VThe 1100 GPH Non-Automatic Bilge Pump delivers powerful and efficient water evacuation for marine applications. Designed for flexibility, this pump requires activation through a panel or separate float switch, giving boat owners full control over the operation. With a flow rate of 1100 GPH, it ensures rapid water removal to keep your bilge dry and your vessel safe.Built to last, this pump features anti-airlock protection, a robust stainless-steel motor shaft, and exclusive moisture-tight seals, making it ideal for harsh marine conditions. Maintenance is simplified with the quick-connect motor and base design, allowing the pump to be replaced in seconds without disconnecting the plumbing. Whether you’re replacing or upgrading, the 1100 GPH Bilge Pump sets the standard for reliable, user-friendly performance.Features: High-Performance Water Evacuation: With a flow rate of 1100 GPH, this pump rapidly removes bilge water, keeping your vessel dry and ready for safe operation in all conditions. Non-Automatic Design: This pump requires activation through a separate float or panel switch, giving you complete manual control over the operation for enhanced reliability. Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Advanced Anti-Airlock Protection: The vented impeller design prevents airlocks, ensuring uninterrupted water flow for consistent performance in challenging conditions. Dual-Size Outlet Compatibility: Includes both 1-inch and 1-1/8 inch straight fittings, along with a 90-degree 1-1/8 inch fitting for flexible and easy installation in various setups. Durable Marine-Grade Construction: Features a stainless-steel motor shaft, marine-grade silicon-blocked wiring, and exclusive moisture-tight seals to resist corrosion and ensure long-lasting operation. Built-In Check Valve: The integrated check valve prevents water backflow, maintaining a dry bilge and increasing pump efficiency for optimal operation. Meets Industry Standards: Fully submersible and ignition protected, meeting or exceeding ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for marine safety and reliability. Compact and Lightweight: Measuring 4.83 x 2.99 x 4.72 inches and weighing just 1.03 lbs, this compact pump is easy to install even in tight bilge spaces. 4-Year Warranty: Backed by Commodore’s 4-year warranty, ensuring reliable performance and peace of mind for boat owners. Specifications: Outlet: 3/4" and 1-1/8" Voltage: 12V Gallons per hour: 1100 GPH (Gallons Per Hour) Outlet Diameter: 1-inch (25mm) & 1-1/8 inch (29mm) Current: 40A Head: 12 feet (4 meters) Unit Weight: 1.03 lbs (0.47 kg) Included Components: Dual-size straight fitting (3/4 inch and 1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect wiring for hassle-free setup Specifications: Gallons Per Hour: 1100 Operation: Non-Automatic Volts: 12V Box Dimensions: 3"H x 5"W x 5"L WT: 1.2 lbs UPC: 817683022973 Brochure (pdf)

Read more less

2000 GPH Automatic AMP Sensor Bilge Pump - 12VThe 2000 GPH Automatic Bilge Pump is designed for superior performance, durability, and convenience. With a high flow rate of 2000 GPH and innovative electronic sensing technology, this pump operates without the need for an external float switch. The advanced design checks for water every 2.5 minutes and activates only when necessary, ensuring efficient water removal. Its quick-connect system allows for easy maintenance and replacement, while robust construction ensures reliability in harsh marine environments. Whether you’re replacing or upgrading your bilge pump, the 2000 GPH model offers unmatched performance and ease of use.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Advanced Automatic Operation: Innovative electronic sensing technology activates the pump only when water is detected. The pump checks for water every 2.5 minutes, running for just 0.5 seconds to conserve energy. High-Performance Flow Rate: Capable of pumping up to 2000 GPH, this pump quickly clears bilge water, even in demanding marine conditions. Anti-Airlock Protection: Features a vented impeller housing that prevents airlock, ensuring consistent and reliable performance at all times. Durable Marine-Grade Construction: Built with a stainless-steel motor shaft, exclusive moisture-tight seals, and marine-grade blocked wiring for long-lasting performance in harsh environments. Dual Outlet Options: Includes both straight and 90-degree fittings for 1-1/8 inch hoses, ensuring flexible compatibility with various installations. Built-In Check Valve: Prevents water backflow into the bilge, maintaining a dry environment and enhancing overall efficiency. Specifications: Weight: 1.71 lbs Flow rate: 2000 GPH (Gallons Per Hour) Volts: 12V Current: 7.5A Head: 18.04' (5.5m) Outlet Diameter: 1-1/8 inch (29mm) Included Components: Standard straight fitting (1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect plumbing and wiring Specifications: Gallons Per Hour: 2000 Operation: Automatic Outlet Size: 3/4" & 1-1/8" Volts: 12 Box Dimensions: 4"H x 6"W x 6"L WT: 2 lbs UPC: 817683023024 Brochure (pdf)

Read more less

2000 GPH Non-Automatic Bilge Pump - 24VThe 2000 GPH Non-Automatic Bilge Pump is engineered for superior performance, durability, and ease of maintenance. Designed for marine applications, this high-capacity pump operates via a separate float or panel switch, providing complete user control. Its advanced anti-airlock technology, moisture-tight seals, and stainless-steel motor shaft ensure consistent operation even in the harshest marine conditions.Featuring a quick-connect design, the pump, base, and wiring can be replaced in seconds without disrupting plumbing connections. The robust impeller design, combined with its high-efficiency motor, delivers exceptional water evacuation while operating quietly with low energy draw. Dual-size straight and 90-degree outlet fittings provide flexibility for a variety of installation setups.Whether you’re upgrading or maintaining your bilge system, the CM-A31-2000B ensures reliable and hassle-free performance, meeting the highest safety and marine standards.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Powerful Water Evacuation: Delivers a high flow rate of 2000 GPH, efficiently clearing large volumes of water to keep your bilge dry and safe in critical conditions. Non-Automatic Operation: Requires a separate float switch or manual panel switch, giving boat owners full control over when the pump activates. Anti-Airlock Technology: The advanced impeller design prevents airlocks, ensuring smooth and uninterrupted operation in any marine environment. Dual Outlet Compatibility: Includes both straight and 90-degree fittings for 1-1/8 inch hoses, offering flexibility for various plumbing configurations. Marine-Grade Durability: Features a high-efficiency motor with a stainless-steel shaft, exclusive moisture-tight seals, and marine-grade blocked wiring for long-lasting reliability. Meets Safety Standards: Fully submersible and ignition protected, meeting or exceeding ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for safe marine operation. Quiet and Energy-Efficient Operation: The high-efficiency motor operates quietly with a low amp draw, minimizing power consumption without sacrificing performance. 4-Year Warranty: Backed by Commodore’s 4-year warranty, ensuring dependable operation and peace of mind for marine enthusiasts. Specifications: Voltage: 24V Flow Rate: 2000 GPH (Gallons Per Hour) Outlet Diameter: 1-1/8 inch (29mm) Current: 7.5A (12V) / 4.0A (24V) Head: 18.04 ft (5.5m) Unit Weight: 1.71 lbs (0.78 kg) Included Components: Dual-size straight fitting (1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect wiring for hassle-free setup Specifications: Gallons Per Hour: 2000 Operation: Non-Automatic Outlet Size: 3/4" & 1-1/8" Volts: 24 Box Dimensions: 4"H x 6"W x 6"L WT: 1.9 lbs UPC: 817683023239 Brochure (pdf)

Read more less

1100 GPH Automatic AMP Sensor Bilge Pump - 12VThe B31-Series Automatic Bilge Pump offers unparalleled efficiency and reliability for marine applications. Designed with a compact, automatic operation, this high-performance pump eliminates the need for a separate float switch. With a flow rate of 1100 GPH and compatibility with both 12V and 24V systems, it is perfect for a wide range of vessels. Durable, marine-grade materials and advanced features ensure a long service life, while the quick-connect components make installation and maintenance a breeze. Whether you're upgrading or replacing a bilge pump, the B31-Series delivers powerful performance and unmatched convenience.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Automatic Operation: No float switch is required. The pump checks for water every 2.5 minutes and activates only when needed, conserving energy and ensuring optimal performance. High Flow Capacity: Capable of pumping 1100 GPH, this pump is ideal for quickly removing bilge water, even in challenging marine conditions. Durable Marine-Grade Materials: Built with a stainless-steel motor shaft, moisture-tight seals, and marine-grade, silicon-blocked wiring, it is designed to withstand harsh marine environments. Submersible and Ignition Protected: Fully submersible and meets or exceeds ISO 8846 and ISO 8849 standards for safe operation in explosive atmospheres. Built-In Check Valve: Prevents water backflow, ensuring that your bilge remains dry and efficient between pump cycles. Dual Outlet Compatibility: Includes fittings for 3/4 inch and 1-1/8 inch hoses, offering flexible compatibility with existing plumbing. Warranty: Backed by a 4-year warranty, providing peace of mind and reliable performance. Specifications: Weight: 1.03 lbs Flow Rate: 1100 GPH Volts: 12V Current: 4.0A Head: 12.0' (4.0m) Included Components: Dual-size straight fitting (3/4 inch and 1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect wiring for hassle-free setup Specifications: Gallons Per Hour: 1100 Operation: Automatic Outlet Size: 3/4" & 1-1/8" Volts: 12 Box Dimensions: 3"H x 5"W x 5"L WT: 1.3 lbs UPC: 817683023017

Read more less

Rule 2000Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features: Fully Submersible Easy clean triple stage snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 5"H x 6"W x 7"L WT: 3.3 lbs UPC: 042237083319 Owner's Manual (pdf)

Read more less