Chinook 707 120V AC 2-Speed 7" Fan - WhiteEveryone's favorite fan. Moves air up to 250 CFM.The most versatile AC fan a boater can have on board! The model 707 Chinook's combination of quality and performance has made it our best-selling fan for more than 20 years. You'll be amazed at how much air this fan moves and its small size makes it easy to move anywhere on the boat.Features: Powerful 2-speed motor Stands only 8.5" high 6' AC Power Cord Anti-slip rubber feet Finger safe blade requires no grilling CSA approved 2-year warranty Made in Canada Benefits: Superior airflow Whisper quiet Takes up very little counter space Storable when not in use Very stable and stays in place Easy to clean Safe Years of trouble free use Owner's Manual (pdf)Brochure (pdf)

Read more less

MF 842 Vented Loop - 3/4"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications: Barb Size: 3/4" (19.05mm) Height: 4-1/2" (114.3mm) Width: 3-3/4"" (95.25mm) Specifications: Type: Vented Loops Box Dimensions: 2"H x 4"W x 5"L WT: 0.1 lbs UPC: 028026148728

Read more less

Rule 2000Non-Automatic 24VEngineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 24 Volts DC .Voltage:24 (Vdc)Amp Draw: 4 (amp)Fuse Size:7.5 (amp)Height:152 (mm) 6 (inches)Width:108 (mm) 4-1/4 (Inches)Weight:1.3 (kg) 2-15 (lb)WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Gallons Per Minute: 33.3 GPM Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 24v Type: Electric Box Dimensions: 5"H x 5"W x 6"L WT: 3.2 lbs UPC: 042237083340 Owner's Manual (pdf)

Read more less

Half Ball & Shaft Kit - WhiteDometic Half Ball and Shaft repair kit for electronic toilets that have a plug in style base. In the Box: One (1) Flush Ball One (1) Rotor Shaft One (1) Screw Legacy # 385310969*Sold as an Individual WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Automatic Bilge Pump 750 GPH - 12VFully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 1m head. Stainless steel shaft, compact and easy to install.Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode.Features: Automatic Submersible Includes 19 mm (3/4″) straight and elbow detachable discharge ports For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length Specifications: Weight: 0.45 kg/1 lb Dimensions: 151/6L x 95/3.75H x 78/3W mm/in  Fuse: 2,7A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Electric Gallons Per Hour: 750 GPH Gallons Per Minute: 12 GPM Operation: Non-Automatic Outlet Size: 1-1/4" or 1-1/2" Volts: 12v Box Dimensions: 4"H x 5"W x 7"L WT: 1.3 lbs UPC: 7340176600158

Read more less

Pressure Storage Tank - 0.5 Gallon DrawdownA pneumatic pressure charge, matched to the pump cut on pressure prevents water logging by separating the air charge from system water pressure with a rubber bladder. The result is smooth pressure delivery, even temperature mix in showers, and reduced pump cycling. Tanks may be mounted in any position, and anywhere in the cold water plumbing after the pump. PST tanks may be used for fresh or salt water. Mount hardware is included. PST-6 has a pump stand for mounting PJR, WSC-60 or WSC-80 pump. Specifications: Diameter: 8" Mounting: Stand 30/50 Drawdown: 0.5 gallon Thread NPT: 3/4"

Read more less

1-1/2" NPT Bronze 3-Way Valve Features: 3-way valve operates logically - The handle points to the direction of flow Center position is "off" Handle rotates a full 180°. Mount foot included. Full flow.   Stainless steel handle and hardware.  PTFE seats and seals.  TWV-1500 size is ideal for waste systems.  UL listed for fuel or water. Specifications: Construction: Bronze Box Dimensions: 5"H x 5"W x 10"L WT: 5.45 lbs UPC: 742985142947

Read more less

BP-4 Poly Basket - 2.6" x 7.5"Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches in length, and from 1.9 to 3.1 inches in diameter.Fits: ARG-1210 SA-1000 Specifications: Material: Plastic Box Dimensions: 3"H x 3"W x 11"L WT: 0.2 lbs UPC: 742985174986

Read more less

Motor Assembly Kit 12V for MasterFlushMasterFlush 12V DC Motor Assembly from Dometic.Features: Motor: Approx 4" Diameter x 3-1/4" Tall. Complete Assembly is 5-1/4" Tall. Pump Head is 4" OD with a 1-1/4" OD x 1" ID Port. Wiring Harness is 11" L. 13.5V DC 21 A Intermittent Duty Motor WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Pro Blaster II Ultimate 5.0 Washdown Pump - 24 VDC - 5.0 GPM - 60 PSIThe Shurflo Pro Blaster II Washdown Pumps deliver superior performance that customers have come to expect and rely upon.Features: Sealed switch Ignition protected Thermally protected Inlet strainer 2 each 3/4" hose barb fittings, 1 each 3/4" GHT (M) fitting Nozzle included [aftermarket models only] Specifications: Dimensions: 10” x 5” x 4.75” (254 x 127 x 120 mm) Voltage: 24 DC Flow Rate: 5.0 GPM (18.9 LPM) Amps (Max): 7 Shut-Off Pressure: 60 PSI (4.1 Bar) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gallons Per Minute: 5.0 GPM Max PSI: 60 Volts: 24v Box Dimensions: 6"H x 6"W x 12"L WT: 8.1 lbs UPC: 752324011933 Quick Guide (pdf)

Read more less

AQUA KING™ II Supreme 5.0 (24VDC) Fresh Water Pump w/Strainer & FittingsSHURFLO®’s AQUA KING™ II Fresh Water Pumps are designed for boats with multi-fixtures providing “Just like home” shower pressure, and can operate at lower flow conditions without cycling. A built in mechanical bypass function enables these pumps to vary the flow rate for any on demand condition, without the need for an accumulator. With heavy duty motors built to withstand the tough marine environment these motors feature an electro-coated seamless shell motor, O-ring sealed end bells, and complete sealed wire entries on the motor shell and pressure switch. The AQUA KING™ II Fresh Water Pumps can run dry without damage. Inlet strainer and ½" hose barb fittings are included. (aftermarket models only). Ignition protected. Thermally protected. 3 Year WarrantyFeatures: Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor Independent Chambers Built-in Check Valve Co-Molded Diaphragm Adjustable Switch & By-Pass Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE Specifications: 24 VDC 5.0 GPM [18.9 LPM] 7 Amps (Max.) 55 PSI [3.8 BAR] Intermittent Duty Multi-fixture Applications 1/2" NPS-M Inlet/Outlet This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gallons Per Minute: 5 GPM Max PSI: 55 Volts: 24v Box Dimensions: 6"H x 6"W x 12"L WT: 7.9 lbs UPC: 752324011896 Quick Guide (pdf)

Read more less

PRO BLASTER™ II Washdown Pump Ultimate - 12 VDC - 5.0 GPMSHURFLO's PRO BLASTER II washdown pump delivers superior performance that customers have come to expect and rely upon. Whether it's blasting away the grimiest decks clean, fish box scaling and anchor chain cleaning, SHURFLO's PRO BLASTER II washdown pump delivers high performance that provide a powerful consistent spray pattern. Built to withstand the marine environment with electro-coated motor, O-ring seals, fully sealed wire entries and can run dry without damage. Inlet strainer, 1/2" hose barb fittings and nozzle included. Ignition protected. Thermally protected.Features: 5901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 5 GPM Box Dimensions: 6"H x 6"W x 12"L WT: 8.25 lbs UPC: 752324011926

Read more less

Rule 3700Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet. 12 Volts DC unless noted.Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 3700 GPH Operation: Non-Automatic Outlet Size: 1-1/2" Volts: 12v Type: Electric Box Dimensions: 7"H x 8"W x 11"L WT: 6 lbs UPC: 042237083357 Owner's Manual (pdf)

Read more less

Drain Plug for ARG Strainer 2009 & Newer - No O-RingDrain plug W/O O-ring for ARG Strainer. For Strainers older than 2008 use ARG-506.

Read more less

1" Bronze Extra Long Thru-Hull Fitting w/Nut Features: Extra long NPSM / NPT combination thread C83600 Bronze Specifications: Hose Size: 1" Material: Bronze Box Dimensions: 3"H x 3"W x 6"L WT: 1 lbs UPC: 742985141759

Read more less

90° Discharge AdapterRaritan's 90° Discharge Adapter includes a flange and is for Straight to 90°.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 6"L WT: 0.3 lbs UPC: 085462000553

Read more less

1100 GPH Livewell Pump Replacement Motor CartridgeThe innovative GPH Livewell Pumps feature removable motor cartridges, which are fast and convenient to replace.Features: 1100 GPH Replacement Specifically for GPH Livewell Pumps Quick Guide (pdf)

Read more less

Design Marine Toilet Standard Electric - 12VDesigned standard electric compact toilet with a combined electrical 12V macerator and pump for waste disposal and flushing in one single operation.Including one touch electrical control panel. Easy to clean white ceramic design bowl and white wooden seat.Port conections inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″). Robust, stable and compact with a preferred appearance like a home toilet.Specifications: Weight: 15.5 kg/39 lbs Type: Design Single Operation Electric *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Color: White Size: Compact Size Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1" or 1-1/2" Rinse Water: RAW Volts: 12v Type: Toilet Box Dimensions: 16"H x 18"W x 19"L WT: 39.3 lbs UPC: 7340176601889

Read more less

500 GPH Livewell Pump Straight Seacock InletGood Fishing Begins with Good BaitFor over 50 years, boat builders and owners have depended on Rule pumps for a safe, fun day out on the water. Building on that legacy of marine performance, the Rule Livewell Pump Series has been designed to deliver superior performance and unsurpassed quality – making it the perfect choice for keeping bait and catch alive.To meet the needs of today’s faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops.Easy Motor ReplacementA simple and convenient “push and twist button” motor cartridge removal system makes it easy to remove and replace the motor cartridge when fitted in hard-to-reach areas of the boat.High-Efficiency Motor and Impeller DesignThe advanced engineering of the Rule Livewell Pump Series ensures a more efficient water circulation, which is crucial for maintaining the well-being of bait/catch in the livewell.Adaptable to Different Setups and ConfigurationsAll Rule livewell pumps are supplied with threaded nylon hose barb attachments, making them adaptable to different setups and configurations and allowing for versatile hose mounting options.High Inlet Pressure Capability for High-Speed VesselsWhile other livewell pumps are not engineered to withstand the additional water pressures of boats with high-speed pickup scoops, the Rule Livewell Pump Series features a high inlet pressure capability that can keep up with the demands of more powerful boats.Features: High-efficiency pump design for optimal bait health Simple one-hand ‘twist & click’ motor cartridge removal/replacement Inlets for straight thru-hull, angled thru-hull, and seacock installations Secondary inlet port for washdown pump connection Advanced anti-airlock protection Specifications: Open Flow: 500 GPH Inlet Style: Straight Seacock Inlet Size - NPT: 3/4" NPT Thread Discharge Size - Hose Barb: 3/4" Voltage: 12VDC Amp Draw @ 12VDC: 3.0 AMP Fuse Size: 5 AMP Replacement Motor Cartridge PN: 65DR Quick Guide (pdf)

Read more less

Grey IC Waste Pump 12VUnique Intelligent Control means Gulley IC Kit is all you need to manage waste from multiple drains through one pumpElectrical signals are sent from the Two Way Manifold IC only when grey waste water needs to be pumped outComplete prewired grey waste system that handles waste from multiple drains using the high capacity Gulper IC pump.Features and Benefits Senses waste level through wall - not in contact with water Quiet drainage Removes the need to install a bulky grey waste tank Service free - No moving parts to clog or burn Fully potted circuitry - protected against water ingress WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Waste Pumps Gallons Per Minute: 5 GPM Inlet Size: 3/4" or 1" Operation: Automatic Outlet Size: 3/4" or 1" Volts: 12v Operation Method: Automatic Box Dimensions: 6"H x 8"W x 12"L WT: 5.4 lbs UPC: 766478945716

Read more less

Thermostatic Mixing Valve Kit for Nautic Boiler B3A thermostatic mixing valve is a valve that blends hot water with cold water to ensure constant, safe shower and bath outlet temperatures, preventing scalding. The Quick thermostatic mixing valve is suited perfectly for the Quick and Sigmar brand of water heaters. This kit is sold complete with the valve, hose , and fittings.For use with Quick Nautic Boiler B3.

Read more less

PHII Complete Pump AssemblyA complete Pump replacement for the PHII, PHC, P101, P102 – The PHIIPUMP is the largest capacity manual pump on the market making it the most efficient. Some boaters like to fix their pumps by buying individual pieces and fixing only the part that needs attention. Others find it more efficient to simply unbolt the old one and put the new one on. The PHIIPUMP is complete and includes a new joker valve as well as a discharge fitting. You will need to keep the handle from the old toilet but other than the handle everything else you will need to secure it to you existing base is in the package!Features: Eliminate pump repair time Update to current design Fits on Raritan Compact II base WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 4"H x 9"W x 11"L WT: 1.5 lbs UPC: 085462009532

Read more less

Pressure Relief Valve - 75 PSIWater Heater Pressure Relief valve. Water heater temperature and pressure relief valves, or T&P valves, are a safety feature found on all tank water heaters. It's designed to open temporarily and discharge short spurts of water when the temperature exceeds about 210 degrees F, and it releases pressure if the tank gets above 75 psi.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 3"W x 6"L WT: 0.55 lbs UPC: 098268583076

Read more less

Macerator Pump Housing Kit - LongJabsco Macerator Pump Housing Kit specifically for 18690.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Garboard Drain & Plug - Machined BronzeThe Garboard Drain & Plug provides drainage for the bilge during haul-out. 1/2” NPT tapered thread plug provides a watertight seal. 2” diameter flange. Plug has a square top for use with a socket wrench. Constructed of machined bronze. Installs with three #10 FH fasteners (not included).Specifications: 1/2" NPT Fastener - #10 FH

Read more less

4" Flangemount Heavy Duty Blower - 24V - 250 CFMThe powerful flange mount blower is designed for use wherever continuous ventilation is required. A motor life of 5,000 hours is guaranteed for service in the most challenging conditions.Features: Extended life 5,000-hour motor They provide outputs of 250 cfm (7.1m3/min) 24V DC Rigid reinforced thermoset plastic housing Mounts to any flat surface Slip-on inlet ducting connection Efficient high-volume airflow Low-current draw Corrosion-resistant materials throughout N.M.M.A. type accepted Meets USCG Electrical Regulations of Title 33 *Sold as an Individual Specifications: Open Flow (CFM): 250 CFM Volts: 24v Box Dimensions: 11"H x 12"W x 14"L WT: 6.4 lbs UPC: 671880522144

Read more less

DC 105 CFM Flangemount 3" BlowersJabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately 1000 hours. Therefore, the blower should only be used for applications if this length of service is acceptable.Features: Tough Reinforced Plastic Housing Mount to any surface Slip-On Inlet and Outlet Ducting Connection Efficient High Volume Air Flow Low Current Draw Corrosion-Resistant Materials Throughout N.M.M.A. Type Accepted Meets USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection Complies with ISO 9097 MARINE WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 3" Open Flow (CFM): 105 CFM Volts: 12v Box Dimensions: 7"H x 8"W x 9"L WT: 2.6 lbs UPC: 1067188002973 Owner's Manual (pdf)

Read more less

Premium Utility Pump - 12 VDC, 1.5 GPMIncorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.Features: 12 VDC Ignition Protected BUNA Valves CE 7' [2.1m] Prime 8' Cable with Battery Clips Hose kit Included Uses: Winterizing, Oil Change and Liquid Transfers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Gallons Per Minute: 1.5 GPM Box Dimensions: 5"H x 6"W x 11"L WT: 4.65 lbs UPC: 752324009206

Read more less

DC 250 CFM Flexmount Continuous Duty 4" BlowersFeatures: Extended Life 5,000 Hour Motor Tough Reinforced Thermoset Plastic Housing Mounts To Any Flat Surface Slip-On Inlet Ducting Connection Efficient High Volume Air Flow Low-Current Draw Corrosion-Resistant Materials Throughout N.M.M.A. Type Accepted Meets USCG Electrical Regulations of Title 33 Chapter I, Part 183 Subpart I and IS0 8846 for Ignition Protection Complies with ISO 9097 Marine CE Conforms with EN 5008-1 for Supression of Electro-magnetic interference WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 4" Open Flow (CFM): 250 CFM Volts: 24v Box Dimensions: 11"H x 11"W x 14"L WT: 7.2 lbs UPC: 671880523738 Owner's Manual (pdf)

Read more less

Stainless Steel Basin Sink - 11.5" x 5" - Brushed FinishThis is a brushed-finish 10 in. basin sink, and it's just the right size for smaller heads.Specifications:Material: 18/10 Stainless Steel Flange Profile: A Flange Width: 3/4 in. Depth: 5 in. Drain Opening: 2-1/16 in. Shipping Weight: 5 lbs

Read more less

Bowl Seal Kit - Plug In Base - BlackThe Dometic seal is normally replaced with the toilet bowl will no longer hold water. These seals will fit all plug in base toilets.In the Box: Seals Hardware Legacy # 385311009 *Sold as an Individual WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Fittings & Hoses Box Dimensions: 1"H x 6"W x 6"L WT: 0.5 lbs UPC: 713814044718

Read more less

AC 100 CFM Flangemount 3" BlowersFeatures: Tough Reinforced Plastic Housing Continuous duty motor with thermal overload Mount to any surface Slip-On Inlet and Outlet Ducting Connection Efficient High Volume Air Flow Corrosion-Resistant Materials Throughout WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 3" Open Flow (CFM): 100 CFM Volts: 115v Box Dimensions: 7"H x 8"W x 9"L WT: 3.5 lbs UPC: 671880029438 Owner's Manual (pdf)

Read more less

Handy Boy Utility PumpVersatile polished brass multi-purpose hand pump Drain, fill or top up engine and gearbox oil Overcomes problem of hard to reach drain plugs and filler caps Oil and corrosion resistant brass neoprene construction with up to 1 1/2 GPM output 1001 other uses on any boat WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 1.5 GPM Outlet Size: 1/2" Type: Manual Box Dimensions: 2"H x 9"W x 16"L WT: 1.8 lbs UPC: 671880028288 Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 5.28"-5.59" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Outer Diameter (inch): 5.28" to 5.59"

Read more less

Stainless Steel Basin Sink - 11.5" x 5" - Mirror FinishThis basin sink has a mirror finish and is made of 18/10 stainless steel.Specifications: Flange Profile: A Flange Width: 3/4 in. Depth: 5 in. Drain Opening: 2-1/16 in. Shipping Weight: 5 lbs

Read more less

Stainless Steel Sink Basin - 9" x 4" - Mirror FinishThis is the smallest Scandvik basin sink.Specifications:Material: 18/10 Stainless Steel (mirror finish) Flange Profile: B Flange Width: 5/8 in. Depth: 4 in. Drain Opening: 2-1/16 in. Shipping Weight: 4 lbs.

Read more less

316 Stainless Steel T-Bolt Clamp 3/4" Band - Range 8.25" to 8.69"Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation. These clamps can be used on any hose connection with peace of mind that they will last you a very long time. These clamps are sold in 2 configurations; part numbers ending in “L” signify that a long T-Bolt is being used and is for our Rubber Hose products. The part number without the “L” is for our Silicone and PVC products. 3-Year Warranty. Quick Guide (pdf)

Read more less

1-1/2" NPT #316 Stainless Steel In-Line Ball ValveFeatures: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to reach hard-to-reach valves and eases actuation of hard to operate valves) Thumb-release locking mechanism assures the valve remains in the position selected 1000 WOG rated #316 SS body #304 SS handle and trim Bonding attachment PTFE seats and seals UL listed for fuel or water Full flow Fits IBVF-S for Seacock Application Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 6"W x 9"L WT: 3.4 lbs UPC: 742985139824

Read more less

1-1/2" Bronze Tri-Flanged Ball Valve/SeacockFeatures: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug The zerk can also be used for draining Field reversible handle allows you to select the closed position orientation (clockwise or counter-clockwise) that best suits the installation Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves Full Flow Triangular base with bolt pattern to match most popular brands makes retrofit easy C83600 bronze construction Stainless steel handle and hardware Chrome plated solid brass ball PTFE Seats and Seals Bonding attachment on base Specifications: Construction: Bronze Box Dimensions: 5"H x 5"W x 9"L WT: 4.7 lbs UPC: 742985141261

Read more less

17" Deluxe Flush Fresh Water Electric Toilet w/Soft Close Lid - 12VYou may install JABSCO Deluxe Flush electrically operated marine toilets in both power and sailing craft, either above or below the waterline, for use on sea, river, lake or canal.Features: Space saving stylish design Regular household size seat Virtually silent operation for undisturbed sleep User selectable choice of "one touch" flush cycles for minimal water usage - a 'Quick Flush'uses less than 1 quart (1 litre) Owner selectable choice of leaving bowl wet or dry after use Non-clogging large bore flush pump macerates waste Uses less than 1.0 amp/hour per day ISO 8846 MARINE - Ignition Protection Crevice free contours for added cleanliness and hygiene All plumbing and wiring easily concealed WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Toilet Color: White Operation Method: Electric Rinse Water: Fresh Volts: 12v Box Dimensions: 20"H x 22"W x 24"L WT: 32 lbs UPC: 671880628495

Read more less

Impeller KitMaterial:NitrileDrive Type:Single Flat DriveNumber of Blades:8Dimensions:Diameter:1-1/4"Shaft Width:5/16"Shaft Diameter:15/32"Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Hose AdapterReplacement Garden Hose Adapter

Read more less

MegaPress 316 FKM 2" UnionFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:AFM flat gasket, FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 5"H x 8"W x 8"L WT: 4.5 lbs

Read more less

Base Valve Gasket for 29090 & 29120 Series ToiletsJabsco Base Valve GasketCompatible Models: 29090 Series Toilets 29120 Series Toilets

Read more less

50' White Coiled Hose with Adjustable NozzleFeatures: 50' White Coiled Hose with Nozzle Male fitting: 3/4" Female Fitting: 3/4" Material: Polyrethane Hose Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 12"W x 18"L WT: 2.8 lbs UPC: 725060044213

Read more less

Portable Washdown Pump Kit Everything you need to power-wash your boat or RV in a convenient stow-and-go carrier.  This easy-to-use washing kit is built with a high-pressure diaphragm pump that is self-priming, can run dry without damage, and won't overheat. Just connect to a garden hose or use the supplied input hose to draw water directly from the lake, ocean, or even a bucket and you are ready to wash. Features: Smooth, quiet operation and flow Low power draw Easy, quick-connect fittings Technical Specifications: Flow Rate - 2 GPM Pressure - 100 PSI Carrier Dimensions (L x W x H) - 13.8" x 11.3" x 12.5" Voltage - 12 V In the Box:  Sealed pump in case Adjustable spray nozzle Input water hose with quick-connect fitting and filter - 6.6' (2 M) Spray hose with quick-connect fitting - 12.3' (3.75 M) Power cord - battery clips (for direct battery connection) and a DC power port adapter WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 2 GPM Max PSI: 100 Volts: 12 Box Dimensions: 12"H x 13"W x 14"L WT: 12.2 lbs UPC: 666996100683 Owner's Manual (pdf)

Read more less

Fresh Head Conversion Kit - Raw-Pressurized Fresh - Converts PHII, PH, PHC, CPII & CPFeatures: Conversion Applications: PHII, PH, PHC, CPII and CP Model Toilets Converts Toilet Water Supply from Raw Water to Pressurized Fresh Water Kit Includes Everything Required for Water Source Changeover Kit Includes: Pump Assembly (Model # 25200) Flapper Valve Assembly (Model # 1228CW) Spud Assembly (Model # 1236W) Atmospheric Breaker cover (Model # 168006) Atmospheric Breaker (Model # 221300) Breaker O-ring (Model # 221331) Pump Cover (Model # 25214) Handle Assembly (Model # 25221) Handle screw key (Model # FT001) Hose inlet 1/2" (Model # PLF-50P) 1/4" x 20 x 1" screw (Model # F099) Flapper valve washer (Model # 1226C) Nut 1/-20 Hex 18-8 SS (Model # 1226B) Nylon nut (Model # 25309) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 9"H x 10"W x 12"L WT: 2.8 lbs UPC: 085462035586

Read more less

Blow Out Plug - Plastic - Screws Into Water Inlet Completely clear your water lines with boat and RV blow-out plugs. Screw the plug into the city water inlet, open all drains and faucets, attach and activate the air pump until all lines are clear.

Read more less