Impeller Kit - 10 Blade - Neoprene - 2" Diameter x 7/8"W Pin Drive InsertMaterial: NeopreneInsert Material:BrassDrive Type: Slotted Shaft Pin Drive or Through Hole Pin DriveNumber of Blades: 10Dimensions:Diameter:2"Shaft Width:1/2"Shaft Diameter:7/8"Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Vented LoopVented loops are anti-siphon safety devices for use with both manual and electric marine toilets installed below the waterline (static or heeled)WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Vented Loops Box Dimensions: 2"H x 9"W x 9"L WT: 0.5 lbs UPC: 671880529495 Owner's Manual (pdf)

Read more less

500GPH Electronic Sensing Bilge Pump - 24VIn the next generation sensing bilge pumps, the 500GPH 24V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!All that plus the added benefits of our standard bilge pump: Check valve included with hidden air vent to prevent airlocking True electromagnetic suppression (EMC) A built-in thermal cell that protects the pump and the vessel when things get too hot These are the smallest automatic pumps available on the market!!!Features: Completely automatic with manual override - No Float Switch Needed! Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 500 GPH Operation: Automatic Volts: 24v Box Dimensions: 4"H x 7"W x 7"L WT: 1 lbs UPC: 042237104793

Read more less

2-Speed Turbo Fan - 12V - BlackUniversal fans from the versatile and well respected “Turbo” range.Can be turned and pivoted in all directions, and locked in position.Features: 150mm diameter fan blade with guard High air moving capacity with low power consumption Two speed switch in front of the blade guard Side, upright or pendant mounting Quality German motor provides very quiet operation Specifications: Material Description: Impact resistant plastic Switch: Integrated 2 stage rotary Output / Speed 1: 70L / sec. Output / Speed 2: 95L / sec. Power Consumption: 6.5W Installation: Pre-wired with 140mm of cable

Read more less

High Flow Submersible Electric Galley Pump - 12VWhale electric galley pump range includes models with the very latest electronic technology. All pumps are manufactured from only highest quality inhouse molded parts and robust motors.Whale has developed the pump designs based on more than 60 years of expertise. Today Whale has used that experience to develop the most compact, quiet, lightweight high performance electric galley pumps.Features: Simple and compact High flow submersible Ideal for up to 2/3 mixer outlets 15.8 liters per minute maximum flow rate 3.8 Amps power consumption 12V Specifications: Type: Electric Volts: 12v Box Dimensions: 2"H x 8"W x 9"L WT: 0.5 lbs UPC: 766478942173

Read more less

Snap-Handle Stainless Steel Drain Plug - 1" DiameterA clockwise turn of the handle tightens the plug in its tube, and the handle flips down to lock.Features: Handle: Stainless Steel For 1" diameter drains *Sold as an Individual Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 3"W x 7"L WT: 0.5 lbs UPC: 022697752079 Quick Guide (pdf)

Read more less

Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 24VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service  GPH (Gallons Per Hour): 800 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 24V Fuse Size: 2 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet Specifications: Gallons Per Hour: 800 GPH Operation: Non-Automatic Outlet Size: 3/4" or 1" Type: Electric Volts: 24v Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs UPC: 022697024121 Quick Guide (pdf)

Read more less

GX Tank 140 Tank Monitoring for 4-20 MA, 1-10VDC Sensors - Monitors Up to 4 Sensors *Sensor Not IncludedThe GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for our range of GX system monitoring products, of which the Cerbo GX is the most commonly used model.Tank levels can be read out locally in the system, see screenshot, as well remotely through our VRM Portal.The GX Tank is compatible with current senders (4 to 20 mA) as well as voltage senders (0 to 10 V). The connection to the GX Device is via USB, which is also how the GX Tank is powered: no additional power wires are required.Tank sender wiring is kept as simple as possible: two of the four inputs provide a 24 V power supply, to power the sender. The other two channels do require an external power supply, and there is power in the terminal together with fused outputs to facilitate that.Upper and lower limits are configurable, to allow using senders that provide only part of the scale, for example, 0 to 5 V.To provide a stable reading, the readings are averaged damping. The damping can be configured between 1 and 60 seconds.Faulty sensors and wiring issues are detected: an alarm will be raised when values are out of range.For marine applications, the GX Device can transmit these tank levels on the NMEA 2000 network to be picked up by other displays such as an MFD.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

Perko 1-1/4" Seacock Ball Valve BronzeThese valve bodies are offered to meet the needs of applications thatrequire extra long, scoop or flush type thru-hulls.Cast Bronze.Technical Information: Flange Diameter Inches: 4-7/8" Overall Height Inches: 4-1/4" Pipe Size Inches: 1-1/4" Model Number: 0805007PLB Ship Weight: 5.3 lbs. *Overall height is measured from the top of the hose adapter to the bottomof the flange. Specifications: Construction: Bronze Box Dimensions: 5"H x 8"W x 9"L WT: 5.45 lbs UPC: 085226238048 Quick Guide (pdf)

Read more less

2-Speed Turbo Fan - 24V - BlackUniversal fans from the versatile and well respected “Turbo” range.Can be turned and pivoted in all directions, and locked in position.Features: 150mm diameter fan blade with guard High air moving capacity with low power consumption Two speed switch in front of the blade guard Side, upright or pendant mounting Quality German motor provides very quiet operation  Specifications: Material Description: Impact resistant plastic Switch: Integrated 2 stage rotary Output / Speed 1: 70L / sec. Output / Speed 2: 95L / sec. Power Consumption: 6.5W Installation: Pre-wired with 140mm of cable

Read more less

Quiet Flush E2 Raw Water Toilet Compact Bowl - 24V - Soft Close LidFrom crowded charter boats to racing yachts and everything in between, the award-winning Jabsco Quiet Flush E2 marine toilet has been designed to solve some of the biggest marine waste challenges facing boat owners and manufacturers. With its simplified installation, ease of serviceability, and sleek touch sensor control, the Quiet Flush E2 brings a whole new level of convenience and comfort to the water.Easy to InstallThe Quiet Flush E2 gives even the occasional boater the confidence to install this toilet. For maximum flexibility in tight spaces, the base can be rotated, allowing you to install the pump with the discharge to the left, right, or rear.Easy to ServiceDesigned for recreational craft but built to withstand the abuse of commercial use, the quick-release system provides easy access to the macerator pump and discharge hose with no tools needed.Easy to OperateMarine toilets bring the comfort of home with you, but there are additional considerations on a boat, which is why the Quiet Flush E2 puts you in complete control. With its sleek touch sensor panel, users can choose three settings, including a water-saving, eco-friendly cycle.Installation: The base can be rotated to the left, right, or rear of the bowl to suit multiple installation options The discharge pump can be rotated 180 degrees to suit the base orientation and ensure pipework is routed to the rear of the toilet Straight or 90-degree discharge port for easy install Quick Release for Easy Servicing: Quick release system allows for fast and easy removal of discharge pumps and hoses when servicing is necessary C-Clip design releases pump assembly from the toilet base without the need for tools, resulting in fast service time Multi-Function Touch Panel: Stylish, low-profile design Touch-sensitive operation Eco flush, full flush, or empty functions Only 1-liter (1-quart) per flush using eco mode Designed for wet room installations No spill ‘empty’ feature to leave bowl dry when the boat is in motion Specifications: Bowl Size: Compact Seat & Lid: Wood Slow Close Lid: No Water: Sea, river, and lake water Device: Rinse pump Flush Control Switch: Touch panel Voltage DC: 24 Recommended Fuse Size (AMP): 25 Size (H x W x D): 14 x 13.9 x 16.3 inches (355 x 352 x 415 mm) Weight: 34.2 lbs. (15.5 kg) Specifications: Color: White Operation Method: Electric Rinse Water: RAW Size: Compact Size Type: Toilet Volts: 24v Box Dimensions: 20"H x 24"W x 24"L WT: 35.2 lbs UPC: 671880640763 Quick Guide (pdf)

Read more less

Quiet Flush E2 Fresh Water Toilet Compact Bowl - 24V - Soft Close LidFrom crowded charter boats to racing yachts and everything in between, the award-winning Jabsco Quiet Flush E2 marine toilet has been designed to solve some of the biggest marine waste challenges facing boat owners and manufacturers. With its simplified installation, ease of serviceability, and sleek touch sensor control, the Quiet Flush E2 brings a whole new level of convenience and comfort to the water.Easy to InstallThe Quiet Flush E2 gives even the occasional boater the confidence to install this toilet. For maximum flexibility in tight spaces, the base can be rotated, allowing you to install the pump with the discharge to the left, right, or rear.Easy to ServiceDesigned for recreational craft but built to withstand the abuse of commercial use, the quick-release system provides easy access to the macerator pump and discharge hose with no tools needed.Easy to OperateMarine toilets bring the comfort of home with you, but there are additional considerations on a boat, which is why the Quiet Flush E2 puts you in complete control. With its sleek touch sensor panel, users can choose three settings, including a water-saving, eco-friendly cycle.Installation: The base can be rotated to the left, right, or rear of the bowl to suit multiple installation options The discharge pump can be rotated 180 degrees to suit the base orientation and ensure pipework is routed to the rear of the toilet Straight or 90-degree discharge port for easy install Quick Release for Easy Servicing: Quick release system allows for fast and easy removal of discharge pumps and hoses when servicing is necessary C-Clip design releases pump assembly from the toilet base without the need for tools, resulting in fast service time Multi-Function Touch Panel: Stylish, low-profile design Touch-sensitive operation Eco flush, full flush, or empty functions Only 1-liter (1-quart) per flush using eco mode Designed for wet room installations No spill ‘empty’ feature to leave bowl dry when the boat is in motion Specifications: Bowl Size: Compact Seat & Lid: Wood Slow Close Lid: No Water: On-board fresh water Device: Solenoid valve Flush Control Switch: Touch panel Voltage DC: 24 Recommended Fuse Size (AMP): 15 Size (H x W x D): 14 x 13.9 x 16.3 inches (355 x 352 x 415 mm) Weight: 34.2 lbs. (15.5 kg) Specifications: Color: White Operation Method: Electric Rinse Water: Fresh Size: Compact Size Type: Toilet Volts: 24v Box Dimensions: 22"H x 24"W x 24"L WT: 43.35 lbs UPC: 671880640756 Quick Guide (pdf)

Read more less

1/2" NPS NPT Combo Bronze Thru-Hull Fitting with NutFeatures: NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 5" UL Listed 647B Available with (-W) or without nut (-L) BSPP and Stainless Steel models available Specifications: Hose Size: 1/2" Material: Bronze Box Dimensions: 3"H x 3"W x 4"L WT: 0.45 lbs UPC: 742985064096

Read more less

ARG-1500 Series 1-1/2" Raw Water Strainer with Non-Metallic Plastic BasketFeatures: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel & Non-Metallic One-Piece Molded Sight Glass Eliminates Tie Rods and Gaskets Improved Drain Plug Non-Metallic Cap Magnifies Internal Viewing NPT or BSPP Threaded Ports Improved Basket Design C84400 bronze head casting UL Listed 255-D  Specifications: Material: Plastic Box Dimensions: 8"H x 9"W x 16"L WT: 10.95 lbs UPC: 742985134201

Read more less

3/8" BSP x 1/2" NPT - BrassAdapters convert 3/8” BSP-M to 1/2” NPT-M or 1/2" NPS-M. Washers included.Specifications: Material: Brass Brass Thread Type: 3/8” BSP-F and 1/2” NPT-M

Read more less

Marine Toilet Silent Electric Comfort - 12VSilent electric comfort toilet with seperated flushing and waste disposal cycle. Including electronic 3 function control panel, before use, after use and short use plus a trimmer to regulate the flow rate.Water is from existing pressurized water system onboard with 12V solenoid valve (PN 07-66-030) or 12V flush pump (PN 07-66-032)- not included! Silent operation and low water consumption. Easy to clean white regular ceramic bowl and white thermoplastic softclose seat.Port conections inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″). Stable base for robust installation.Plug & play/ interchangeable with Jabsco 37045-1092, Johnson Pump 80-47232-01 and other 12V dual cycle electrical toilet models.Specifications: Weight: 9.3 kg/24 lbs Dimensions: 460/18.1L x 385/15.2H x 365/14.4W mm/in  Type: Dual Operation Electric *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Color: White Size: Household Size Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1" or 1-1/2" Rinse Water: Fresh Volts: 12v Type: Toilet Box Dimensions: 16"H x 17"W x 19"L WT: 28.3 lbs UPC: 7340176601575

Read more less

Seaward 6 Gallon Hot Water Heater with Front Heat Exchager - White Epoxy - 120V - 1500WWhale Electric Water Heaters includes model with the very latest technology. All heaters are manufactured from the highest quality materials and designed to specifically withstand harsh marine conditions.The White Epoxy Coated Aluminium cases are well-suited to installation in many of today's engine rooms. Their white appearance blends in well with existing equipment and the coated aluminium material offers corrosion resistance.Features and Benefits Multiple versions to suit your installation Robust Manufacturing Safety controls Magnesium anodes available separately Sturdy, robust exteriors Ignition protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 6 Heat Exchanger: Yes Volts: 120v Box Dimensions: 14"H x 14"W x 23"L WT: 18.4 lbs UPC: 766478947956

Read more less

Little Pal Utility PumpCompact polished brass multi-purpose hand pump Ideal for small engine and gearbox oil drain Simply pump old oil out with dipstick probe Oil and corrosion resistant brass and neoprene construction with up to 1 gpm output Small enough to fit any tool box WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 1 GPM Outlet Size: 1/2" Type: Manual Box Dimensions: 2"H x 8"W x 11"L WT: 1 lbs UPC: 671880028622 Quick Guide (pdf)

Read more less

1700 Series Water Heater120v20 GallonW/O Engine Heat ExchangerThe "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P (temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT.Benefits: Simple installation - retrofits to most on-board pressure systems Proven long-life design Withstands the rigors of the marine environment Glass-lined steel tank is more durable than stainless steel Attractive polymer jacket resists corrosion from dampness Ignition-protected, adjustable thermostat Round tanks are designed to withstand more pressure than square tanks Glass-lined steel tank for long life and high efficiency Environmentally friendly CFC-free foam insulation Replaceable magnesium anode to protect tank and neutralize acids in the water The tank is covered by a five-year Limited Warranty Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 20 Heat Exchanger: No Volts: 120v Box Dimensions: 22"H x 22"W x 28"L WT: 65 lbs UPC: 085462001598 Owner's Manual (pdf)Brochure (pdf)

Read more less

18A Float SwitchThe 02-Series Automatic Float Switch transforms any manual bilge pump into an efficient and reliable automatic system. Designed with a unique ball-bearing activation mechanism, this float switch provides superior reliability and longevity compared to traditional reed switches. Built to handle bilge pumps with a maximum current draw of 18A, the switch is compatible with 12V, 24V, and 32V DC systems, making it versatile for a variety of marine applications.Fully submersible and made with high-quality ABS material, the switch is sealed using ultrasonic welding to ensure leak-proof operation. With a compact design and straightforward installation, it seamlessly integrates into any marine system. The ignition-protected construction and mercury-free design guarantee safe and eco-friendly performance, while its long lifespan ensures consistent operation through millions of cycles.Features: Converts Manual Bilge Pumps to Automatic: This float switch transforms any compatible bilge pump into an automatic system, activating the pump when water levels reach 2.36 inches and deactivating it at 1.18 inches. Unique Ball Bearing Design: Features an internal weighted ball bearing activation mechanism for superior reliability and smoother operation compared to traditional reed switch designs. Fully Submersible and Leak-Proof: Constructed with high-quality ABS material and sealed using ultrasonic welding, the switch is both durable and fully submersible for tough marine environments. Mercury-Free and Eco-Friendly: Designed without mercury, ensuring safe operation for the environment while complying with international marine safety standards. High Current Capacity: Handles up to 18A at 12V, making it compatible with a wide range of bilge pumps and ideal for demanding marine applications. Easy Installation: The compact and user-friendly design allows for straightforward installation, reducing setup time and effort. Long-Life and High Switching Frequency: Built to withstand up to 10 million cycles, this switch ensures dependable performance for years of use. Ignition-Protected Construction: Meets ISO 8846 Marine standards, making it safe for installation in engine compartments or confined spaces. Specifications: Wire Load: 3 ft. Dimensions: 7.68" x 5.71" Weight: 0.29 lbs Specifications: Operation: Automatic Box Dimensions: 2"H x 5"W x 8"L WT: 0.5 lbs UPC: 817683022942 Brochure (pdf)

Read more less

Par-Max HD4 Heavy Duty Water Pressure Pump - 24V - 4 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Max PSI: 40 Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 7.9 lbs UPC: 671880841894 Brochure (pdf)

Read more less

1100 GPH Vertical Livewell Pump - Long - 12VThe Vertical Livewell/Baitwell Pump is engineered to meet the needs of professional anglers, ensuring optimal water flow to keep your catch fresh and oxygenated. With an impressive 1100 GPH flow rate, this pump features a 360° rotatable housing and discharge nozzle, allowing for easy and customizable installation. Designed for durability and convenience, the pump includes anti-airlock technology and a dual-port fitting for optional washdown pump integration.Built with advanced seals and a long-life motor, the Livewell/Baitwell Pump offers reliability for extended use. The innovative split quick-connect joint design allows for seamless replacement of the motor cartridge without the need to disconnect the base or plumbing. Whether you’re a recreational angler or a professional, this pump provides the performance and versatility needed for marine applications.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. 360° Rotatable Pump Housing and Discharge Nozzle: Allows for precise positioning of the outlet, ensuring easy installation and optimal performance. Quick Motor Cartridge Removal: The push-button system lets you remove and replace the motor cartridge in seconds without disrupting the base or plumbing. Dual-Port Fitting for Washdown Pump: Designed with a dual-port fitting to integrate an optional washdown pump, providing added versatility for cleaning or rinsing. Anti-Airlock Technology: Hidden air vents prevent airlocks during operation, ensuring consistent and reliable water flow even in challenging plumbing setups. Durable and Long-Lasting Construction: Built with advanced seals and a long-life motor, the pump is designed to withstand harsh marine environments and heavy use. Threaded Discharge Fittings: Includes both straight and 90-degree elbow fittings for flexible installation options, catering to various system setups. Innovative Split Quick-Connect Design: Simplifies motor replacement by eliminating the need to disconnect plumbing or the pump base, saving time and effort. Certified and Safe: Meets CE, RoHS, ISO 8846, and ISO 8849 standards, ensuring compliance with global marine safety regulations. Specifications: Weight: 1.21 lbs Voltage: 12V Flow Rate: 1100 GPH Current: 4.0A

Read more less

3.0 GPM Water Pump - 12VThe 3.0 GPM 12V Fresh & Raw Water Washdown Pump combines versatility, quiet operation, and robust performance for a wide range of water applications. With its 3-chamber diaphragm design, this positive displacement pump delivers up to 3.0 GPM of consistent flow and 45 PSI shut-off pressure, making it ideal for freshwater supply, washdowns, and other transfer needs. Capable of supplying up to 3 fixtures simultaneously, it self-primes up to 6 vertical feet and runs dry without damage, ensuring maximum durability in both freshwater and saltwater environments.Commodore’s ultra-quiet motor, paired with a completely rubber mounting base, absorbs vibration and reduces noise to levels no louder than a home air conditioner. This pump is easy to install, service, and winterize, thanks to its industry-standard mounting pattern and threaded connections. Backed by a 4-year warranty, it’s a dependable and quiet solution for boats, RVs, and water transfer systems.Features: Ultra-Quiet Operation: Designed with a low-noise motor and a rubber mounting base, this pump operates extremely quietly, reducing vibration and noise to near-silent levels – perfect for enclosed spaces. Self-Priming and Run-Dry Safe: The pump self-primes up to 6 feet vertically and can run dry without damage, ensuring durability and reliability during demanding tasks. Adjustable Pressure Switch: The built-in pressure switch allows for automatic operation, starting and stopping the pump when fixtures are opened and closed, with adjustable settings up to 45 PSI. Versatile Multi-Use Design: Perfect for freshwater supply, raw water washdown, livewell circulation, and water transfer applications, this pump can supply up to 3 fixtures simultaneously. Built-In Thermal Overload Protection: The motor features a thermal overload protection that automatically shuts off to prevent overheating, with an automatic restart feature. Durable and Saltwater Safe: Made with EPDM valves and a Santoprene diaphragm, this pump handles fresh and saltwater applications while ensuring long-lasting performance. Easy Installation and Maintenance: Includes industry-standard 1/2"-14 MNPT ports, a compact mounting base, and threaded connections for simple setup, servicing, and winterization. 4-Year Warranty: Backed by COMMODORE’s industry-leading 4-year warranty, offering reliable performance and peace of mind for years to come. Specifications: Voltage: 12V Open Flow Rate: 3.0 GPM (11.3 LPM) Shut-Off Pressure: 45 PSI (3.1 BAR) Priming Capabilities: 6 feet (1.8 meters) suction lift Max Draw: 6.74A Max Temperature: 140°F (60°C) Ports: 1/2"-14 MNPT Unit Weight: 4.23 lbs (1.92 kg) Included Components: Dual-size straight fitting and filter Quick-connect wiring for hassle-free setup Specifications: Gallons Per Minute: 3 Volts: 12 Box Dimensions: 5"H x 6"W x 10"L WT: 4.8 lbs UPC: 817683023093 Brochure (pdf)

Read more less

1100 GPH 60 Series Automatic Bilge Pump - 12VThe 1100 GPH 60-Series Automatic Bilge Pump is the ultimate all-in-one solution for boat owners seeking powerful, reliable, and efficient water removal. Featuring a built-in float switch, this automatic bilge pump eliminates the need for additional components, activating only when water levels rise and shutting off when the bilge is clear. Designed to withstand harsh marine environments, it comes equipped with a high-torque motor, advanced seals, and an anti-fouling impeller for superior longevity and performance.Maintenance is simplified with a snap-off strainer base for easy cleaning and a quick-connect wiring system, allowing the motor cartridge to be replaced in seconds. Built to meet ISO 8846 and ISO 8849 standards, the 1100 GPH bilge pump is fully submersible and ignition-protected, providing unmatched safety and reliability on the water.Features: All-in-One Automatic Design: The Integrated float switch detects rising water levels and automatically activates the pump, shutting off when the bilge is clear. No separate float switch is needed, simplifying installation. Powerful and Reliable Performance: With a flow rate of 1100 GPH and a high-torque motor, this pump ensures fast and efficient water evacuation, keeping your bilge dry and safe. Anti-Fouling Impeller and Debris Protection: The advanced impeller design resists fouling, while the snap-off strainer base protects the impeller and float switch from debris, ensuring smooth operation. Quick-Connect Motor Cartridge: Replace the motor in seconds without the need to remove the base or plumbing. This user-friendly feature simplifies maintenance and minimizes downtime. Oil-Resistant Activation: Will not activate in the presence of straight motor oil, ensuring accurate water detection and preventing unnecessary operation. Meets Marine Safety Standards: Fully submersible and ignition protected, this pump meets or exceeds ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for safety and performance. Compact and Lightweight Design: With dimensions of 6.14 x 3.62 x 4.57 inches and a weight of only 1.33 lbs (0.6 kg), this pump is easy to install and fits in tight bilge spaces. 4-Year Warranty: Backed by Commodore's industry-leading 4-year warranty, providing peace of mind and reliable operation. Specifications: Voltage: 12V Flow Rate: 1100 GPH (Gallons Per Hour) Outlet Diameter: 1-1/8 inch (29mm) Current: 3.0A (Max Draw: 6.0A) Wire Lead: 3 feet (1 meter), 18 AWG Weight: 1.02 lbs (0.47 kg) Why Choose the Commodore 1100 GPH Automatic Bilge Pump?The Commodore 1100 GPH Bilge Pump is a premium solution for boat owners seeking reliable automatic bilge management. With its all-in-one design, built-in float switch, and superior debris protection, this pump guarantees efficient and hassle-free operation. Its robust construction, ease of maintenance, and compliance with marine safety standards make it the perfect companion for any watercraft. Specifications: Gallons Per Hour: 1100 Operation: Automatic Outlet Size: 1-1/8" Volts: 12 Box Dimensions: 4"H x 5"W x 6"L WT: 1.3 lbs UPC: 817683023079 Brochure (pdf)

Read more less

1100 GPH Vertical Livewell Pump - Short - 12VThe Short Vertical Livewell/Baitwell Pump is designed for professional and recreational anglers who demand high performance and reliability. With an impressive 1100 GPH flow rate, this pump delivers clean, oxygenated water to your livewell tank, keeping your catch fresh and healthy. Its 360° rotatable housing and discharge nozzle make installation flexible and customizable, while the quick-connect motor cartridge system ensures maintenance is quick and effortless.The innovative dual-port fitting allows for optional washdown pump integration, giving you added versatility for marine applications. Built with anti-airlock technology and advanced seals, this pump is designed to perform in challenging environments. The split quick-connect joint design eliminates the need to disconnect the base or plumbing during motor replacement, simplifying your workflow on the water.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. 360° Rotatable Pump Housing and Discharge Nozzle: Allows for precise positioning of the outlet, ensuring easy installation and optimal performance. Quick Motor Cartridge Removal: The push-button system lets you remove and replace the motor cartridge in seconds without disrupting the base or plumbing. Dual-Port Fitting for Washdown Pump: Designed with a dual-port fitting to integrate an optional washdown pump, providing added versatility for cleaning or rinsing. Anti-Airlock Technology: Hidden air vents prevent airlocks during operation, ensuring consistent and reliable water flow even in challenging plumbing setups. Durable and Long-Lasting Construction: Built with advanced seals and a long-life motor, the pump is designed to withstand harsh marine environments and heavy use. Threaded Discharge Fittings: Includes both straight and 90-degree elbow fittings for flexible installation options, catering to various system setups. Innovative Split Quick-Connect Design: Simplifies motor replacement by eliminating the need to disconnect plumbing or the pump base, saving time and effort. Certified and Safe: Meets CE, RoHS, ISO 8846, and ISO 8849 standards, ensuring compliance with global marine safety regulations. Specifications: Weight: 1.00 lbs Voltage: 12V Flow Rate: 1100 GPH Current: 4.0A Specifications: Gallons Per Hour: 1100 Inlet Style: Straight Outlet Size: 1-1/8" Volts: 12 Box Dimensions: 2"H x 8"W x 9"L WT: 1.2 lbs UPC: 817683023048 Brochure (pdf)

Read more less

1100 GPH Non-Automatic Bilge Pump - 12VThe 1100 GPH Non-Automatic Bilge Pump delivers powerful and efficient water evacuation for marine applications. Designed for flexibility, this pump requires activation through a panel or separate float switch, giving boat owners full control over the operation. With a flow rate of 1100 GPH, it ensures rapid water removal to keep your bilge dry and your vessel safe.Built to last, this pump features anti-airlock protection, a robust stainless-steel motor shaft, and exclusive moisture-tight seals, making it ideal for harsh marine conditions. Maintenance is simplified with the quick-connect motor and base design, allowing the pump to be replaced in seconds without disconnecting the plumbing. Whether you’re replacing or upgrading, the 1100 GPH Bilge Pump sets the standard for reliable, user-friendly performance.Features: High-Performance Water Evacuation: With a flow rate of 1100 GPH, this pump rapidly removes bilge water, keeping your vessel dry and ready for safe operation in all conditions. Non-Automatic Design: This pump requires activation through a separate float or panel switch, giving you complete manual control over the operation for enhanced reliability. Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Advanced Anti-Airlock Protection: The vented impeller design prevents airlocks, ensuring uninterrupted water flow for consistent performance in challenging conditions. Dual-Size Outlet Compatibility: Includes both 1-inch and 1-1/8 inch straight fittings, along with a 90-degree 1-1/8 inch fitting for flexible and easy installation in various setups. Durable Marine-Grade Construction: Features a stainless-steel motor shaft, marine-grade silicon-blocked wiring, and exclusive moisture-tight seals to resist corrosion and ensure long-lasting operation. Built-In Check Valve: The integrated check valve prevents water backflow, maintaining a dry bilge and increasing pump efficiency for optimal operation. Meets Industry Standards: Fully submersible and ignition protected, meeting or exceeding ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for marine safety and reliability. Compact and Lightweight: Measuring 4.83 x 2.99 x 4.72 inches and weighing just 1.03 lbs, this compact pump is easy to install even in tight bilge spaces. 4-Year Warranty: Backed by Commodore’s 4-year warranty, ensuring reliable performance and peace of mind for boat owners. Specifications: Outlet: 3/4" and 1-1/8" Voltage: 12V Gallons per hour: 1100 GPH (Gallons Per Hour) Outlet Diameter: 1-inch (25mm) & 1-1/8 inch (29mm) Current: 40A Head: 12 feet (4 meters) Unit Weight: 1.03 lbs (0.47 kg) Included Components: Dual-size straight fitting (3/4 inch and 1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect wiring for hassle-free setup Specifications: Gallons Per Hour: 1100 Operation: Non-Automatic Volts: 12V Box Dimensions: 3"H x 5"W x 5"L WT: 1.2 lbs UPC: 817683022973 Brochure (pdf)

Read more less

1100 GPH Angled Livewell Pump - 12VThe Angled Livewell Pump delivers exceptional performance and reliability, making it an essential tool for serious anglers. With a powerful 1100 GPH flow rate, this pump ensures your livewell tank remains filled with clean, oxygenated water to keep your catch fresh. Its 360° rotatable housing and discharge nozzle provides unparalleled flexibility, making installation straightforward and adaptable to your unique setup.Designed with anti-airlock technology, the pump prevents air locking during operation, ensuring consistent performance. Maintenance is effortless thanks to the quick-connect motor cartridge removal system, which allows for motor replacement without disconnecting the base or plumbing. Built to meet CE, RoHS, ISO 8846, and ISO 8849 standards, this pump guarantees durability, reliability, and safety in any marine environment.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. 360° Rotatable Housing and Nozzle: The pump housing and discharge nozzle can rotate a full 360 degrees, allowing precise positioning for optimal installation. Quick Motor Cartridge Removal: Features a push-button mechanism for effortless motor replacement without disrupting plumbing or the pump base. Anti-Airlock Technology: Built with hidden air vents to prevent air locking in complex plumbing setups, ensuring continuous water flow. Dual-Port Fitting for Washdown Integration: Includes a dual-port fitting to support an optional washdown pump, adding versatility to your marine setup. Multiple Discharge Options: Comes with removable straight and elbow fittings, making it easy to adapt to different installation requirements. Certified and Safe: Complies with CE, RoHS, ISO 8846, and ISO 8849 standards, ensuring reliable performance and safety in marine environments. Long-Lasting and Durable: Built with advanced seals and a robust motor, this pump is designed for extended use in demanding conditions. Specifications: Weight: 1.21 lbs Voltage: 12V Current: 4.0A Flow Rate: 1100 GPH Specifications: Gallons Per Hour: 1100 Inlet Style: Straight Volts: 12 Box Dimensions: 2"H x 9"W x 9"L WT: 1.4 lbs UPC: 817683023055 Brochure (pdf)

Read more less

1100 GPH Automatic AMP Sensor Bilge Pump - 12VThe B31-Series Automatic Bilge Pump offers unparalleled efficiency and reliability for marine applications. Designed with a compact, automatic operation, this high-performance pump eliminates the need for a separate float switch. With a flow rate of 1100 GPH and compatibility with both 12V and 24V systems, it is perfect for a wide range of vessels. Durable, marine-grade materials and advanced features ensure a long service life, while the quick-connect components make installation and maintenance a breeze. Whether you're upgrading or replacing a bilge pump, the B31-Series delivers powerful performance and unmatched convenience.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Automatic Operation: No float switch is required. The pump checks for water every 2.5 minutes and activates only when needed, conserving energy and ensuring optimal performance. High Flow Capacity: Capable of pumping 1100 GPH, this pump is ideal for quickly removing bilge water, even in challenging marine conditions. Durable Marine-Grade Materials: Built with a stainless-steel motor shaft, moisture-tight seals, and marine-grade, silicon-blocked wiring, it is designed to withstand harsh marine environments. Submersible and Ignition Protected: Fully submersible and meets or exceeds ISO 8846 and ISO 8849 standards for safe operation in explosive atmospheres. Built-In Check Valve: Prevents water backflow, ensuring that your bilge remains dry and efficient between pump cycles. Dual Outlet Compatibility: Includes fittings for 3/4 inch and 1-1/8 inch hoses, offering flexible compatibility with existing plumbing. Warranty: Backed by a 4-year warranty, providing peace of mind and reliable performance. Specifications: Weight: 1.03 lbs Flow Rate: 1100 GPH Volts: 12V Current: 4.0A Head: 12.0' (4.0m) Included Components: Dual-size straight fitting (3/4 inch and 1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect wiring for hassle-free setup Specifications: Gallons Per Hour: 1100 Operation: Automatic Outlet Size: 3/4" & 1-1/8" Volts: 12 Box Dimensions: 3"H x 5"W x 5"L WT: 1.3 lbs UPC: 817683023017

Read more less

2000 GPH Automatic AMP Sensor Bilge Pump - 12VThe 2000 GPH Automatic Bilge Pump is designed for superior performance, durability, and convenience. With a high flow rate of 2000 GPH and innovative electronic sensing technology, this pump operates without the need for an external float switch. The advanced design checks for water every 2.5 minutes and activates only when necessary, ensuring efficient water removal. Its quick-connect system allows for easy maintenance and replacement, while robust construction ensures reliability in harsh marine environments. Whether you’re replacing or upgrading your bilge pump, the 2000 GPH model offers unmatched performance and ease of use.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Advanced Automatic Operation: Innovative electronic sensing technology activates the pump only when water is detected. The pump checks for water every 2.5 minutes, running for just 0.5 seconds to conserve energy. High-Performance Flow Rate: Capable of pumping up to 2000 GPH, this pump quickly clears bilge water, even in demanding marine conditions. Anti-Airlock Protection: Features a vented impeller housing that prevents airlock, ensuring consistent and reliable performance at all times. Durable Marine-Grade Construction: Built with a stainless-steel motor shaft, exclusive moisture-tight seals, and marine-grade blocked wiring for long-lasting performance in harsh environments. Dual Outlet Options: Includes both straight and 90-degree fittings for 1-1/8 inch hoses, ensuring flexible compatibility with various installations. Built-In Check Valve: Prevents water backflow into the bilge, maintaining a dry environment and enhancing overall efficiency. Specifications: Weight: 1.71 lbs Flow rate: 2000 GPH (Gallons Per Hour) Volts: 12V Current: 7.5A Head: 18.04' (5.5m) Outlet Diameter: 1-1/8 inch (29mm) Included Components: Standard straight fitting (1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect plumbing and wiring Specifications: Gallons Per Hour: 2000 Operation: Automatic Outlet Size: 3/4" & 1-1/8" Volts: 12 Box Dimensions: 4"H x 6"W x 6"L WT: 2 lbs UPC: 817683023024 Brochure (pdf)

Read more less

2000 GPH Non-Automatic Bilge Pump - 24VThe 2000 GPH Non-Automatic Bilge Pump is engineered for superior performance, durability, and ease of maintenance. Designed for marine applications, this high-capacity pump operates via a separate float or panel switch, providing complete user control. Its advanced anti-airlock technology, moisture-tight seals, and stainless-steel motor shaft ensure consistent operation even in the harshest marine conditions.Featuring a quick-connect design, the pump, base, and wiring can be replaced in seconds without disrupting plumbing connections. The robust impeller design, combined with its high-efficiency motor, delivers exceptional water evacuation while operating quietly with low energy draw. Dual-size straight and 90-degree outlet fittings provide flexibility for a variety of installation setups.Whether you’re upgrading or maintaining your bilge system, the CM-A31-2000B ensures reliable and hassle-free performance, meeting the highest safety and marine standards.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Powerful Water Evacuation: Delivers a high flow rate of 2000 GPH, efficiently clearing large volumes of water to keep your bilge dry and safe in critical conditions. Non-Automatic Operation: Requires a separate float switch or manual panel switch, giving boat owners full control over when the pump activates. Anti-Airlock Technology: The advanced impeller design prevents airlocks, ensuring smooth and uninterrupted operation in any marine environment. Dual Outlet Compatibility: Includes both straight and 90-degree fittings for 1-1/8 inch hoses, offering flexibility for various plumbing configurations. Marine-Grade Durability: Features a high-efficiency motor with a stainless-steel shaft, exclusive moisture-tight seals, and marine-grade blocked wiring for long-lasting reliability. Meets Safety Standards: Fully submersible and ignition protected, meeting or exceeding ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for safe marine operation. Quiet and Energy-Efficient Operation: The high-efficiency motor operates quietly with a low amp draw, minimizing power consumption without sacrificing performance. 4-Year Warranty: Backed by Commodore’s 4-year warranty, ensuring dependable operation and peace of mind for marine enthusiasts. Specifications: Voltage: 24V Flow Rate: 2000 GPH (Gallons Per Hour) Outlet Diameter: 1-1/8 inch (29mm) Current: 7.5A (12V) / 4.0A (24V) Head: 18.04 ft (5.5m) Unit Weight: 1.71 lbs (0.78 kg) Included Components: Dual-size straight fitting (1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect wiring for hassle-free setup Specifications: Gallons Per Hour: 2000 Operation: Non-Automatic Outlet Size: 3/4" & 1-1/8" Volts: 24 Box Dimensions: 4"H x 6"W x 6"L WT: 1.9 lbs UPC: 817683023239 Brochure (pdf)

Read more less

PUREWATER+All-In-One Water Filtration System Complete Starter KitFeatures: Simple filter change by twisting off faucet head simply dropping filter into cartridge without crawling under sink On-demand ultra-clean tasting water from your tank Elegantly styled Simple to install Compact filter housing maximizes under sink storage Includes everything needed for installation

Read more less

Rule 2000Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features: Fully Submersible Easy clean triple stage snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 4"H x 5"W x 6"L WT: 3.3 lbs UPC: 042237083319 Owner's Manual (pdf)

Read more less

Heavy Duty Positive Displacement Vane Pump - 24V GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  All models have an ignition protected motor and #316 stainless steel shaft.Specifications: Self Priming: YES Thread NPT: 1/2" + Garden Hose Adaptor Control Type: None Max GPM: 6.5 Breaker DC: 15 Amp Specifications: Volts: 24v Reversible: No Gallons Per Minute: 6.5 GPM Box Dimensions: 5"H x 5"W x 10"L WT: 6.1 lbs UPC: 742985063662

Read more less

1" Bronze In-Line Check ValveFeatures: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline Specifications: Construction: Bronze Box Dimensions: 4"H x 4"W x 5"L WT: 0.9 lbs UPC: 742985145955

Read more less

Seaward Magnesium AnodeFits all Seaward by Whale water heaters.Features: Material: Magnesium Length: 4" Thread: 3/4" pipe WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quick Connect Trigger NozzleFeatures: Multiple flow control settings Quick connect hose/trigger nozzle Can work with both fresh and saltwater Designed for use with washdown pumps

Read more less

3-Way Panel SwitchSimilar to the Lighted Panel Switch but without indicator light or fuse holder. The "manual" position has a "fail-safe" spring return to "off" so you can't leave your pump running by accident. Black stainless steel panel.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12/24/32v Type: Switches Box Dimensions: 3"H x 4"W x 5"L WT: 0.15 lbs UPC: 042237083807 Owner's Manual (pdf)

Read more less

Aft-Deck ShowerInstall flush in the transom or under the gunwale. Includes hinged cover and replaceable sprayer head. Fixtures are corrosion-resistant. Housing and cover are made of high-impact, UV resistant, engineering-grade plastic and are pre-drilled for six #8 fasteners. Comes with 6' hose, shut-off and hot/cold mixing controls. Connects to freshwater system for showeringWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 5"H x 5"W x 11"L WT: 1.91 lbs UPC: 022697413147 Quick Guide (pdf)

Read more less

Waste Pump Assembly - 24V QF/DSFeatures: Waste Pump and Motor 24V For Quiet Flush Toilet  CE Approved   WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Waste Pumps Box Dimensions: 5"H x 9"W x 9"L WT: 4.25 lbs UPC: 671880522366

Read more less

Rule-Mate 2000 GPH 24 Volt Fully Automated Bilge PumpThe Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8". Rule-Mate IntelligenceRule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8". 2000 GPH (7570 LPH) at 0' (27.2V) All-in-one pump and switch Extra long life heavy duty motor 1" NPS discharge with 1" AND 1 1/8" screw-on ports Three year warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Operation: Automatic Gallons Per Minute: 33.3 GPM Gallons Per Hour: 2000 GPH Type: Electric Box Dimensions: 5"H x 7"W x 8"L WT: 4.35 lbs UPC: 042237114303 Owner's Manual (pdf)

Read more less

Baitmaster™ II Livewell Pump - 24 VDC - 4.0 GPM - Rated for Tanks up to 35 Gal - Self-PrimingThe Shurflo® PRO BAITMASTER™ II heavy-duty livewell/washdown pump is excellent for live-well or washdown applications in harsh marine environments. The seamless motor shell and sealed switch protect the pump from splashed liquids. Self-priming and can run dry without damage. For tanks sized 35 gallons and under.Features: Sealed switch Ignition protected Thermally protected 4901 replacement Sealed motor Corrosion-resistant electro-coated motor 4 independent chambers Built-in check valve Co-molded diaphragm Self-priming up to 6 feet Dry run capability Specifications: Dimensions: 10” x 5” x 4.75” (254 x 127 x 120 mm) Voltage: 24 DC Flow Rate: 4.0 GPM (15.1 LPM) Amps (Max): 4 Shut-Off Pressure: 45 PSI (3.1 Bar) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gallons Per Hour: 4.0 GPM Volts: 24v Box Dimensions: 6"H x 7"W x 13"L WT: 7.95 lbs UPC: 752324012022 Quick Guide (pdf)

Read more less

11812 - 6 Gallon Water Heater - 120VKuuma's Premium 6 Gallon Water Heater is perfect for a new installation or as a replacement to an existing water heater.   Constructed of corrosion-resistant, marine-quality aluminum and heats water with the use of an electrical power or integrated heat exchanger.Features: Ignition protected controls Mounting tabs Manual reset Technical Specifications: Capacity - 6 Gallon Electrical Input - 120V Orientation - Horizontal Mounting Brackets - Front and Rear Heating Source - Rear heat exchange Maximum Water Temperature - 210°F T & P Valve Type - 100psi and 210° F Wiring Configuration - L1 and N Dimensions (W x H x D) - 13-3/4" x 13-5/8" x 19-3/4" *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 6 Heat Exchanger: Yes Volts: 120 Box Dimensions: 16"H x 16"W x 22"L WT: 22 lbs UPC: 014717118125 Owner's Manual (pdf)Brochure (pdf)

Read more less

11810 - 6 Gallon Water Heater - 120VKuuma's Premium 6 Gallon Water Heater is perfect for a new installation or as a replacement to an existing water heater.   Constructed of corrosion-resistant, marine-quality aluminum and heats water with the use of an electrical power or integrated heat exchanger.Features: Ignition protected controls Mounting tabs Manual reset Technical Specifications: Capacity - 6 Gallon Electrical Input - 120V Orientation - Horizontal Mounting Brackets - Side and Side Heating Source - Front heat exchange Maximum Water Temperature - 210°F T & P Valve Type - 100psi and 210° F Wiring Configuration - L1 and N Dimensions (W x H x D) - 15-5/8" x 13-5/8" x 19-3/8" *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 6 Heat Exchanger: Yes Volts: 120 Box Dimensions: 16"H x 17"W x 23"L WT: 22 lbs UPC: 014717118101 Owner's Manual (pdf)Brochure (pdf)

Read more less

Service Kit f/Manual Toilet 29090/29120-3000WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 2"H x 6"W x 9"L WT: 0.35 lbs UPC: 671880587921

Read more less

Par-Max HD6 Heavy Duty Water Pressure Pump - 24V - 6 GPM - 60 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Max PSI: 60 Gallons Per Minute: 6 GPM Box Dimensions: 5"H x 6"W x 18"L WT: 8.95 lbs UPC: 671880842037 Brochure (pdf)

Read more less

Heavy Duty Flangemount BlowerHeavy Duty Blowers are designed for applications such as commerical or high use engine room ventilation and extraction where a long life requirement demands heavy duty motors with long brush life. Built to provide the same high outputs as our standard specification blowers. 5,000 hr motor life for the heaviest of applications Continuous duty Efficient high volume air flow Outlet flange mounts directly on bulkhead Slip on inlet ducting connection Low current draw Corrosion resistant materials throughout Dimensionally stable quiet running Delrin rotors Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection) ISO 9097 MARINE (Electric Fans) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 4" Open Flow (CFM): 250 CFM Volts: 12v Box Dimensions: 11"H x 11"W x 14"L WT: 6.75 lbs UPC: 671880522694 Owner's Manual (pdf)

Read more less

Bronze Hose Barb Thru-Hull Fitting - 1-1/2" Features: NPS Thread With Hose Connection C83600 Bronze UL Listed 647B Specifications: Hose Size: 1-1/2" Material: Bronze Box Dimensions: 3"H x 3"W x 4"L WT: 1.25 lbs UPC: 742985005242

Read more less

3/4" Bronze NPS to NPT Flange AdapterIBVF Flanged Adapters have been developed to address several common problems in the marine industry.  Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept standard thru-hulls into the base and standard in-line valves on top Provide a safe and sturdy assembly when in-line valves are used as seacocks For OEMs, prevent valve damage during engine or generator installation - the valve can be installed later Simplifies future valve replacement C83600 Bronze and #316 SS models Specifications: Construction: Bronze Box Dimensions: 4"H x 5"W x 5"L WT: 1.2 lbs UPC: 742985143944

Read more less