Fresh Water Filter Strainer Cover with O-Ring AssemblyFeatures: Strainer Cover For filters used with freshwater pumps

Read more less

OXYGENATOR™ Livewell Oxygen GeneratorPro Live Well Flush MountThe OXYGENATOR™ Pro Live Well Flush Mount is a livewell oxygen generator that will retrofit most boat live wells from 10 to 20 gallons and operates off the existing boat battery.The OXYGENATOR™ manufactures 100% pure oxygen by splitting the hydrogen molecule from the oxygen molecule in water. This creates a super saturated oxygen environment, even in the warmest water.Independent testing shows increasing oxygen in livewell improves fish survival by over 35%. Pro Live Well Flush Mount Details:Injects 100% pure oxygen into livewell or baitwell Increases fish survival over 35% Power requirement: 12V DC drawing less than 1amp No switch required - automatically activated when live well fills with water Easy installation instructions Silent running Emitter size 3.375 inches in diameter Rated capacity 10-20 gallons 3 year warranty Includes: Installation instructions.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12V Outlet Size: N/A Inlet Style: Straight Gallons Per Hour: N/A Box Dimensions: 2"H x 7"W x 11"L WT: 0.65 lbs UPC: 853183000042

Read more less

Service Kit F6B-9Impeller is the same as size as 09-812B 12 Blade , width: 1.9" (49.2mm) Diameter: 2-1/4" (57.1mm)

Read more less

Cartridge Aerator Pump1000 GPH - 90°Johnson Pump cartridge aerator pumps offer the ease of convenience and years of reliable service. Improved design with easy-to-install Dura-Port discharge port. Smaller profiles to fit in more confined spaces. Easy to change motor cartridge.Features: Capacities 500, 750, 1000 and 1250 GPH Available in two different intake configurations: straight or 90° Compact, easily replaceable all-in-one motor/impeller unit No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Improved design with easy-to-install Dura-Port discharge ports (straight and a 90° smooth elbow included) eliminate stress cracking caused by over-tightened hose clamps Meets the international standard, ISO 8849 marine Specifications: Gallons Per Hour: 1000 GPH Inlet Style: Angled Volts: 12v Box Dimensions: 3"H x 9"W x 12"L WT: 1.2 lbs UPC: 729321910798

Read more less

Snap-Handle Brass Drain Plug - 1" DiameterA clockwise turn of the handle tightens the plug in its tube, and the handle flips down to lock.Features: Handle: Brass For 1" diameter drains *Sold as an Individual Specifications: Construction: Brass Box Dimensions: 2"H x 3"W x 6"L WT: 0.1 lbs UPC: 022697752475 Quick Guide (pdf)

Read more less

Replacement Shower Head Sprayer f/Aft-Deck ShowerReplacement shower head only

Read more less

Gulper 320 High Capacity Waste/Bilge Pump 12VHigh Capacity Waste Pump- Fast Drainage and space saving on boardNo clog, no filter waste pump built on more than a decade of market leading pump technology.Gulper 320 - the easy access remote mount bilge pump designed to be located high, dry and protected - ideal where bilge space is very limited.Features Ideal where bilge space is limited-smallest footprint strainer Head rotates 360 degrees to suit your installation High- dry and protected - Remote mounting allows easy access Long life- runs dry without damage Meets requirement for primary bilge pump for boats up to 12m (39.4ft) length Easy to install - including uneven surfaces Secure fit - new wrap around mounting feature, only 3 screws to secure Reliable operation - Self priming Easy maintenance - patented reinforced Ezi-clamp locking ring - simply twist and screw to lock pump head in desired position WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 5 GPM Inlet Size: 3/4" Operation: Non-Automatic Outlet Size: 3/4" or 1" Suction Lift (ft.): 10' Volts: 12v Type: Waste Pumps Operation Method: Non-Automatic Box Dimensions: 6"H x 8"W x 12"L WT: 4.4 lbs UPC: 766478942722

Read more less

HotShot HD4 Heavy Duty Washdown Pump - 12V - 4 GPM - 60 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect straine  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Max PSI: 60 Volts: 12v Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 8"W x 17"L WT: 8.8 lbs UPC: 671880841917 Brochure (pdf)

Read more less

Bellows S/T Pump KitDometic Bellows assembly for the S-Vacuum pump, VG4-Vacuum pump and the T-Discharge pump.  *This does not include the O-rings (P/N 385310151)Features: Toilet flush ball kit Color -  White *Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Plastic Box Dimensions: 3"H x 3"W x 6"L WT: 0.5 lbs UPC: 087735106122

Read more less

Duck Bill Valve Kit - 1-1/2"The Dometic Duck Bill Valves Kit comes with two (2) 1 ½” duck bill valves for “T” and “S” series pumps.  These valves are a critical component of the VacuFlush system.  They help maintain and generate the vacuum for the system and should be replaced frequently. Legacy # 385310076*Sold as a PairWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Gusher Foot Operated Galley Pump Left Handed LeverWhale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce. The simple solution for fresh water dellivery in small galleys.Features Smooth double action Self primes and operates dry without damage Easy, smooth hands free operation Ease of installation- Multi-directional inlet and outlet hose connections 3 mounting options (including thru bulkhead) Left and right oriented foot lever versions available Also ideally used to prime Whale In-Line Booster pumps Pumps fresh and salt water 15 ltrs (4 US gals) per minute WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 7"W x 10"L WT: 2 lbs UPC: 766478055101

Read more less

Low Pressure Cyclone Centrifugal Pump - 12VSilent running. Single tool servicing. 2m (6 foot) suction lift when wet.A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations.Features: Heavy duty robust design Stainless steel construction Long life DC motor Silent running Anti-clog impeller design Long life mechanical seal Single tool servicing  Specifications: Pump Body: Stainless Steel Port Size: 3/4" pipe threads, available with NPTF threads Flow: 110 Liters/Minute (29.7 gallons/min.) Pressure: Up to 0.6 bar (8.7psi) Impeller: Stainless Steel Anti-Clog Impeller Design Shaft Seal: Mechanical Maximum Current: 9 Amp Fuse Size: 10 Amp Motor: Continuously rated Motor life 3500 hours ISO 8846 Marine and USCG Regulations for Ignition Protection ISO 8849 Marine Bilge Pump Standard WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 29.7 GPM Max PSI: 8.7 Volts: 12v Box Dimensions: 6"H x 6"W x 12"L WT: 6.9 lbs UPC: 671880579377 Owner's Manual (pdf)

Read more less

Solenoid/Anti-Syphon Valve - 24VSolenoid valve for use with Quiet Flush fresh water toilets. Inline, normally closed solenoid valve.Features: Supplied with 1/2" (15mm) JG Speed fit connections, 1/2" (15mm) hose barb inlet, 3/4" (19mm) Hose barb outlet Double-check valve to protect against contamination of potable water Internal inlet filter Mountable in any orientation, above or below the toilet. Mounting bracket included Compatible with the Jabsco toilet series 37045, 37055, 37075, 58XX0 Specifications:Voltage: 24V DC

Read more less

500 GPH Livewell Pump Angled Thru-Hull InletGood Fishing Begins with Good BaitFor over 50 years, boat builders and owners have depended on Rule pumps for a safe, fun day out on the water. Building on that legacy of marine performance, the Rule Livewell Pump Series has been designed to deliver superior performance and unsurpassed quality – making it the perfect choice for keeping bait and catch alive.To meet the needs of today’s faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops.Easy Motor ReplacementA simple and convenient “push and twist button” motor cartridge removal system makes it easy to remove and replace the motor cartridge when fitted in hard-to-reach areas of the boat.High-Efficiency Motor and Impeller DesignThe advanced engineering of the Rule Livewell Pump Series ensures a more efficient water circulation, which is crucial for maintaining the well-being of bait/catch in the livewell.Adaptable to Different Setups and ConfigurationsAll Rule livewell pumps are supplied with threaded nylon hose barb attachments, making them adaptable to different setups and configurations and allowing for versatile hose mounting options.High Inlet Pressure Capability for High-Speed VesselsWhile other livewell pumps are not engineered to withstand the additional water pressures of boats with high-speed pickup scoops, the Rule Livewell Pump Series features a high inlet pressure capability that can keep up with the demands of more powerful boats.Features: High-efficiency pump design for optimal bait health Simple one-hand ‘twist & click’ motor cartridge removal/replacement Inlets for straight thru-hull, angled thru-hull, and seacock installations Secondary inlet port for washdown pump connection Advanced anti-airlock protection Specifications: Open Flow: 500 GPH Inlet Style: Angled Thru-Hull Inlet Size - NPT: 3/4" NPSM Thread Discharge Size - Hose Barb: 3/4" Voltage: 12VDC Amp Draw @ 12VDC: 3.0 AMP Fuse Size: 5 AMP Replacement Motor Cartridge PN: 65DR Quick Guide (pdf)

Read more less

800 GPH Livewell Pump Straight Seacock InletGood Fishing Begins with Good BaitFor over 50 years, boat builders and owners have depended on Rule pumps for a safe, fun day out on the water. Building on that legacy of marine performance, the Rule Livewell Pump Series has been designed to deliver superior performance and unsurpassed quality – making it the perfect choice for keeping bait and catch alive.To meet the needs of today’s faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops.Easy Motor ReplacementA simple and convenient “push and twist button” motor cartridge removal system makes it easy to remove and replace the motor cartridge when fitted in hard-to-reach areas of the boat.High-Efficiency Motor and Impeller DesignThe advanced engineering of the Rule Livewell Pump Series ensures a more efficient water circulation, which is crucial for maintaining the well-being of bait/catch in the livewell.Adaptable to Different Setups and ConfigurationsAll Rule livewell pumps are supplied with threaded nylon hose barb attachments, making them adaptable to different setups and configurations and allowing for versatile hose mounting options.High Inlet Pressure Capability for High-Speed VesselsWhile other livewell pumps are not engineered to withstand the additional water pressures of boats with high-speed pickup scoops, the Rule Livewell Pump Series features a high inlet pressure capability that can keep up with the demands of more powerful boats.Features: High-efficiency pump design for optimal bait health Simple one-hand ‘twist & click’ motor cartridge removal/replacement Inlets for straight thru-hull, angled thru-hull, and seacock installations Secondary inlet port for washdown pump connection Advanced anti-airlock protection Specifications: Open Flow: 800 GPH Inlet Style: Straight Seacock Inlet Size - NPT: 3/4" NPT Thread Discharge Size - Hose Barb: 3/4" Voltage: 12VDC Amp Draw @ 12VDC: 4.1 AMP Fuse Size: 7.5 AMP Replacement Motor Cartridge PN: 66DR Quick Guide (pdf)

Read more less

In-Line 3" Bilge Blower - 24VFeatures: Connections: - for 75mm (3") ducting Dimensions: - 130mm long, 95mm high, 125mm wide Fuse Size: - 2.5(amp) Output: - 3.8 cu. m/minute Efficient high volume airflow Quiet running Slip-on inlet and outlet ducting connections Made in corrosion-resistant materials Mounts in any position on any flat surface Low current draw Packaged Dimensions: L:15.00 x H:12.00 x W:13.00cm Actual Weight: 0.54 Kg  (Approx. 0.79 Kg packed) WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Strainer Cover Replacement for 1720, 1740, 46200 & 46400Features: Replacement strainer cover for pump inlet strainers For models 1720, 1740, 46200, and 46400

Read more less

Pumpgard In-Line Strainer 3/4 Hose - 40 MeshInlet strainer protects all-electric diaphragm pumps. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing allows instant inspection. Quick, in-place cleaning of the 40 mesh stainless steel screen.

Read more less

Low Pressure Cyclone Centrifugal Pump - 24VSilent running. Single tool servicing. 2m (6 foot) suction lift when wet.A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations.Features: Heavy duty robust design Stainless steel construction Long life DC motor Silent running Anti-clog impeller design Long life mechanical seal Single tool servicing  Specifications: Pump Body: Stainless Steel Port Size: 3/4" pipe threads, available with NPTF threads Flow: 110 Liters/Minute (29.7 gallons/min.) Pressure: Up to 0.6 bar (8.7psi) Impeller: Stainless Steel Anti-Clog Impeller Design Shaft Seal: Mechanical Maximum Current: 4.5 Amp Fuse Size: 7 Amp Motor: Continuously rated Motor life 3500 hours ISO 8846 Marine and USCG Regulations for Ignition Protection ISO 8849 Marine Bilge Pump Standard WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 29.7 GPM Max PSI: 8.7 Volts: 24v Box Dimensions: 6"H x 6"W x 12"L WT: 7.2 lbs UPC: 671880579384 Owner's Manual (pdf)

Read more less

Deluxe Flush Pump Assembly - 12V12V Centrifugal Flush Pump Assembly for Jabsco Toilet by Jabsco. What can be more fun and rewarding than boating on the open waters? This is an excellent solution for your boating needs. This product is great for use in all marine applications. It will satisfy the needs of both pleasure boat enthusiasts and ambitious yacht owners. Get this excellent product for your vessel and prepare to embark on a thrilling adventure. Features: Carefully crafted to suit your specific boating needs Engineered to high standards High-grade design delivers extended lifespan Made with premium materials Guarantees proper performance  WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 8"H x 9"W x 14"L WT: 7.6 lbs UPC: 671880581653

Read more less

Joker/Check Valve KitFor use with 37010, 37045, 37075, 37085, 37245, 37275 Series Marine Toilets, and 37055, and 37255 Series Electric Conversion Kits.Fits inside the discharge elbow and the connection of the pump cylinder.

Read more less

Mag Drive Centrifugal Pump - 11GPM - 110V ACDesigned for applications that require a safe and leak free, continuous duty pump. Great for marine air conditioning circulation, Ice Makers, Hot water circulation, Livewell and Bait tank installations.Pump Head is manufactured in chemical resistant thermo-plastics - entirely non-metallic.UL listed, ignition and thermally protected fan cooled motor.Features: 11.35 GPM open Flow 110V AC 60Hz 1/2" NPT ports for easy connection 18 foot head WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 110v Gallons Per Minute: 11 GPM Box Dimensions: 8"H x 10"W x 11"L WT: 6.8 lbs UPC: 671880623148 Quick Guide (pdf)

Read more less

1100 Replacement Motor F/ Tournament Series Livewell PumpRule 47DR 12v 1100 GPH Replacement Motor for Rule 405FC Livewell - Baitwell pump.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Replacement Motors Box Dimensions: 4"H x 5"W x 8"L WT: 0.85 lbs UPC: 042237095985

Read more less

Shower Drain and Bilge PumpRobust Single Diaphragm Design Sink & Shower Drain PumpFlow rate: Nominal 16 Litres/min (4.2 US gallons/min)Self-priming from dry up to 3m (10ft)Features: Flexible installation No filter required Compact and simple design Dry running capability Relevant Standards: ISO 8846 MARINE and USCG Regulations for Ignition Protection ISO 8849 MARINE Bilge Pump Standard Built to ISO 15083 Specification Meets BSEN 50081 (Electro Magnetic Compatibility) WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4.2 GPM Inlet Size: 3/4" Outlet Size: 3/4" Suction Lift (ft.): 10' Volts: 12v Type: Shower Drains Box Dimensions: 6"H x 8"W x 14"L WT: 6.65 lbs UPC: 671880581561 Owner's Manual (pdf)

Read more less

Twist n' Lock Pump AssemblyThe intuitive simple to use Twist Lock handle works by locking the redesigned piston assembly into place helping to prevent back flow of any waste water into the bowl. Base valve gasket is included.Compatible Devices: 29090 Series 29120 Series WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Rule In-Line Blower - 4" DuctingPart Number: 240Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. For International & US Markets.Features Efficient high-volume air flow Quiet operation Low amp draw Slip-on inlet and outlet ducting connections Sealed motor shaft for moisture protection Corrosion resistant nickel-plated motor housing IMCI (CE) USCG 183.410 Compliant: Ignition protected Applications:Race cars and helmet ventilationBus ventilation (engine and bathroom fumes)Prison van ventilation (cooling, air-freshening)Blow-up signs and mascotsTanning boothsBuilding ventilationSpecifications Approvals: CE Dimensions (H x W x D): 102 x 152 x 106 (mm) ElectricalCharacteristics: 4.3 Amp Flow Rate (US gallons & litres): 235 CFM @ Open Flow Fuse Size: 7 (amp) Product Inlet Fitting: 4" (102 mm) Ducting Product Outlet Fitting: 4" (102 mm) Ducting Voltage: 13.6 (Vdc) WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 4" Open Flow (CFM): 235 CFM Volts: 12v Box Dimensions: 5"H x 5"W x 6"L WT: 1 lbs UPC: 042237085429 Owner's Manual (pdf)

Read more less

800 GPH Livewell Pump Straight Thru-Hull InletGood Fishing Begins with Good BaitFor over 50 years, boat builders and owners have depended on Rule pumps for a safe, fun day out on the water. Building on that legacy of marine performance, the Rule Livewell Pump Series has been designed to deliver superior performance and unsurpassed quality – making it the perfect choice for keeping bait and catch alive.To meet the needs of today’s faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops.Easy Motor ReplacementA simple and convenient “push and twist button” motor cartridge removal system makes it easy to remove and replace the motor cartridge when fitted in hard-to-reach areas of the boat.High-Efficiency Motor and Impeller DesignThe advanced engineering of the Rule Livewell Pump Series ensures a more efficient water circulation, which is crucial for maintaining the well-being of bait/catch in the livewell.Adaptable to Different Setups and ConfigurationsAll Rule livewell pumps are supplied with threaded nylon hose barb attachments, making them adaptable to different setups and configurations and allowing for versatile hose mounting options.High Inlet Pressure Capability for High-Speed VesselsWhile other livewell pumps are not engineered to withstand the additional water pressures of boats with high-speed pickup scoops, the Rule Livewell Pump Series features a high inlet pressure capability that can keep up with the demands of more powerful boats.Features: High-efficiency pump design for optimal bait health Simple one-hand ‘twist & click’ motor cartridge removal/replacement Inlets for straight thru-hull, angled thru-hull, and seacock installations Secondary inlet port for washdown pump connection Advanced anti-airlock protection Specifications: Open Flow: 800 GPH Inlet Style: Straight Thru-Hull Inlet Size - NPT: 3/4" NPSM Thread Discharge Size - Hose Barb: 1-1/8" Voltage: 12VDC Amp Draw @ 12VDC: 4.1 AMP Fuse Size: 7.5 AMP Replacement Motor Cartridge PN: 66DR Quick Guide (pdf)

Read more less

Service Kit for 50880 Series PumpsFeatures: Contains - 2 Joker Valves, Diaphragm, and Ports For the 50880 Series Includes Service Instructions Actual Weight: 0.13 kg (Approximately 0.33 kg packed)

Read more less

Par-Max HD5 Heavy Duty Water Pressure Pump - 12V - 5 GPM - 60 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 5 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 8.4 lbs UPC: 671880841955 Brochure (pdf)

Read more less

Cartridge Motor - 500GPH - 24VUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Heavy-duty motor with stainless steel shaft for 500 GPH pumps, 24V. Featrues: 24V, 500GPH replacement/spare motor cartridge for Johnson bilge pumps Upgrade the output of the bilge pump in a few minutes by simply replacing the cartridge Cleaning debris from the impeller has never been simpler or easier

Read more less

Water Heater Thermostat AssemblyRaritan's WH16 Water Head Thermostat is located behind the rectangular electrical panel. Raritan offers an adjustment on their thermostats to allow the user to set the water to a higher temperature or if preferred a lower temperature. Use caution if setting the thermostat above 120 degrees as scalding can easily occur. The job of the thermostat is to allow power to the element and to open and close as necessary to keep the water hot inside the tank.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 1"H x 7"W x 8"L WT: 0.45 lbs UPC: 085462011245

Read more less

EBSN 15 Amp Electric Switch f/Bilge PumpFeatures Operation managed by microcontroller. Advanced digital filter to distinguish the presence of water. Extended power supply range. Remote indication of operation status by led or remote control panel (optional). Manual remote pump switch-on by button or remote control panel (optional). Signal for prolonged bilge pump switch on (if led or remote control panel is installed). Protection against excessive battery rundown. Switch-on/switch-off delay to avoid false switch-on/switch-off cycling of the pump caused by the roll of the boat. Functioning over a wide range of environmental temperatures. Resin-coated watertight casing. Easy installation. Specifications: Type: Switches Volts: 12/24v Box Dimensions: 3"H x 5"W x 7"L WT: 1.15 lbs UPC: 8057090045123

Read more less

Garboard Drain Plus with Steel WrenchComplete with Zinc Plated Steel Wrench. Specifications: Cast Bronze Flange Brass Plug Complete with Zinc Plated Steel Wrench Flange Outer Diameter: 3-1/8" Pipe Size: 1" Length: 1" Threaded Screw Size: #10

Read more less

Flush Pro Valve Kit - 1-1/4"Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose.Features: Polymer Stainless Steel Spring Flush your boat engine safely and easily Transparent body allows for visual inspection of water flow Durable check valve system activated by water pressure from a garden hose Check valve automatically shuts off hull intake when water pressure is applied Adapter supplied with Flush Pro make winterizing your boat easy Can be used with on board generators Available for Standard 1-1/4" Hose Sizes Kit Includes:Water Inlet Fitting (Part #0499) Owner's Manual (pdf)

Read more less

Perko 3/4" Thru-Hull Fitting f/ Hose Plastic Molded White Plastic Broad FlangeTechnical Information: Hose Size Inches: 3/4 Mounting Hole Diameter Inches: 1 Maximum Hull Thickness Inches: 1-7/16 O.D. Flange Inches: 1-7/8 Model Number: 0328DP5 Ship Weight: 1.3/9.1 lbs. MADE IN THE USA Specifications: Hose Size: 3/4" Material: Plastic Box Dimensions: 1"H x 2"W x 6"L WT: 0.1 lbs UPC: 085226034138

Read more less

Bronze Slotted Hull Scoop Strainer with Access Door for Up to 1-1/4" Thru HullFeatures: Access door design allows easy access to Thru Hulls C84400 bronze body and door Cast filter slots Pressure relief holes in door casting Specifications: Construction: Bronze Box Dimensions: 2"H x 4"W x 7"L WT: 1.85 lbs UPC: 742985119031

Read more less

800 GPH Shower Sump MK2 System - 12VAttwood’s shower sump systems deliver the performance you’ve been asking for. Choose from standard or large box sizes. They offer fast water flow into and out of the sump. The lid snaps into place to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent airlocks. It meets or exceeds all applicable standards of the ABYC and USCG.Specifications: 800 GPH Amp Draw: 2.5 Rated Voltage: 12V Fuse Size: 5A Outlet Hose Size: 3/4" I.D. Wire/Connector: 22" wire

Read more less

White Plastic 90 Degree Thru-Hull Connector - 1-1/8" Inner Diameter90° Thru-Hulls are ideal for tight installations, such as livewell overflow drains. The angled design also eliminates hose kinking.Specifications: Fits Hose Size: (inch) 1-1/8"inner diameter Max Hull Thickness: (inch) 1-7/8" Flange Diameter: (inch) 2-7/16" Installation Hole Size: (inch) 1-5/16" Drain Plug: (inch) 7/8" Color: White *Plastic Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 1-1/8" Material: Plastic Box Dimensions: 2"H x 4"W x 7"L WT: 0.25 lbs UPC: 022697387936 Quick Guide (pdf)

Read more less

2-Way Waste Manifold 12' Cable 1-1/2" Ports2-way manifold with Whale Intelligent Control built in. The waste manifold can be used with a Whale Gulper pump to create a greywater disposal system. The manifold accepts two waste inputs and senses water through the wall. This relays information to the Gulper IC pump to turn on and pump the wastewater.This Whale WM3884B IC manifold has 12 feet of cable and 1-1/2" ports.Specifications: Height: 115mm (4-1/2") Length Cable: 12' Cable Voltage: 12V - 24V DC Width: 139mm Hose Size Outlet: 25mm (1") & Inlet: 38mm (1-1/2") Model: WM3884B Depth: 102mm (4")

Read more less

Stainless Steel Thru-Hull Short Straight Barbed - 3/4" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedShort Thread is a more compact size, which allows installation near corners and in confined areasSpecifications: Hose size: (inch) 3/4" inner diameter Flange Diameter: (inch) 1-7/8" Thread O.D. (outside diameter): (inch) 1"  Thread Length: (inch) 1" Barb Length: (inch) 1" Total Length: (inch) 2-1/2" Install Hole Saw Size: (inch) 1-1/8"  Thread NPSM: (inch) 3/4" Max Hull Thickness: (inch) 5/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 3/4" Material: Stainless Steel Box Dimensions: 2"H x 3"W x 6"L WT: 0.4 lbs UPC: 022697665416 Quick Guide (pdf)

Read more less

CM10P7-1 - 12V Circulation PumpFeatures: 12V, 4.0 GPM circulation pump Compact, magnetic driven centrifugal pump High flow rate with very low electrical current consumption Suitable for fresh water, ethylene glycol and salt water

Read more less

MK5 Manual Black Waste Sanitation PumpWhale has led the way in manual diaphragm pumps for the marine world for decades.The Mk 5 sanitation is a reliable fully housed black waste pump - reliability when you need it mostFeatures and Benefits Can be mounted in various orientations/positions Tough plastic housing keeps in nasty smells Large virtually unblockable valves Easy to clean (no tools required) High performance- 56 ltrs (14.8 US gals) per minute Wide hose connections for maximum performance - 38 mm (1+") Lightweight design for easy operation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 14.8 GPM Operation: Non-Automatic Outlet Size: 1-1/2" Type: Manual Box Dimensions: 8"H x 9"W x 12"L WT: 3.4 lbs UPC: 766478052704

Read more less

Electric Field Bilge SwitchAll Whale bilge switches are designed and manufacturers with highest quality at heart. Combine these accessories with your whale bilge pump for a robust bilge system tailored to your vessel.Features and Benefits Environmentally friendly - no toxic mercury Easy to install mounted on either horizontal or vertical surface (e.g.bulkhead or hull) Suitable for installations where amp draw is up to 15 amps Compact design WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Switches Box Dimensions: 2"H x 4"W x 7"L WT: 0.5 lbs UPC: 766478946188

Read more less

IC Retail Kit 12V Gulper IC Pump & Strainer ICAt the heart of every Whale IC product lies innovative electronic control circuitry.This enables IC sensor accessories to communicate directly with IC pumps to control their performance.Features & Benefits Save time and money by reducing four separate components to one pre-wired system. Remote mounting automatic Gulper IC receives signals from Strainer IC and switches on and off automatically Pre-wired and assembled - just connect power Remote mounted pump for easy inspection- high,dry and protected Soft start - protects the pump for long life Small footprint strainer fits into very confined bilge spaces Low current controlled switching - no switch failure from high currents On/off delay - prevents cycling Environmentally friendly - no mercury Time delay to allow for optimum drainage Override wire included to allow for manual activation Non-choke valves - no filter to block/clean Long life - pump self primes and runs dry without damage WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Volts: 12v Box Dimensions: 7"H x 8"W x 12"L WT: 5.2 lbs UPC: 766478945693

Read more less

In-Line Check Valve 1"-1 1/2" Stepped ConnectionAll Whale bilge switches, non-return valves, strainers and pipework fittings are designed and manufacturers with highest quality at heart. Combine these accessories with your whale bilge pump for a robust bilge system tailored to your vessel.LV1215 In-line Check Valve 25mm / 38mm (1"/ 1 1/2") Stepped ConnectionWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Supersub 12V 650GPH Low Profile Automatic Bilge PumpThe narrow low profile compact bilge pump range.Supersub Family- Narrow, low profile bilge pump fits deep down in small/ awkward bilge spaces where other pumps won't fit.Features Low narrow design for confined bilge spaces Easy installation - outlet and pump body rotate to suit your installation High performance - Flow up to 1100 US gals per hour Efficient operation - Very low power consumption Easy to clean- snap fit assembly Low profile strainer - Leaves the bilge almost dry WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 650 GPH Operation: Automatic Outlet Size: 3/4" or 1" Volts: 12v Type: Electric Box Dimensions: 3"H x 7"W x 12"L WT: 1 lbs UPC: 766478943255

Read more less

Gulper 220 Grey Waste Pump 12vGulper valve technoloogy handles shower waste such as hair and gel. No clog, no filter waste pump built on more than a decade of market leading pump technology.Features Up to 14 ltrs (3.7 US gals) per minute Will run dry without damage and pump a mixture of air and water Specially designed to pump waste water Large single diaphragm Virtually non-choke valves No filter required Self-priming up to 3 m (10 ft) Easy to install in confined spaces Double outlet valve ensuring continuous flow Multi directional head Can be mounted almost anywhere Low power consumption WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 210 GPH Gallons Per Minute: 3.5 GPM Inlet Size: 3/4" Outlet Size: 3/4" Suction Lift (ft.): 10' Volts: 12v Type: Waste Pumps Box Dimensions: 6"H x 8"W x 12"L WT: 4 lbs UPC: 766478155207

Read more less

Gulper 320 High Capacity Waste/Bilge Pump 24VHigh Capacity Waste Pump- Fast Drainage and space saving on boardNo clog, no filter waste pump built on more than a decade of market leading pump technologyGulper 320 - the easy access remote mount bilge pump designed to be located high, dry and protected - ideal where bilge space is very limited.Features Ideal where bilge space is limited-smallest footprint strainer Head rotates 360 degrees to suit your installation High - dry and protected - Remote mounting allows easy access Long life - runs dry without damage Meets requirement for primary bilge pump for boats up to 12m (39.4ft) length Easy to install - including uneven surfaces Secure fit - new wrap around mounting feature, only 3 screws to secure Reliable operation - Self priming Easy maintenance - patented reinforced Ezi-clamp locking ring -simply twist and screw to lock pump head in desired position WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4.5 GPM Inlet Size: 3/4" Operation: Non-Automatic Outlet Size: 3/4" or 1" Suction Lift (ft.): 10' Volts: 24v Type: Waste Pumps Operation Method: Non-Automatic Box Dimensions: 6"H x 8"W x 13"L WT: 4.5 lbs UPC: 766478942739

Read more less