Major Service Kit for 580X0 & 582X0 Series ToiletsKit Includes: Support Strap, Discharge Hole - Qty 1 Support Strap, Motor - Qty 1 Support Black, Motor - Qty 1 Hose Clip, large - Qty 1 Inlet Hose, Flush Pump - Qty 1 Hose Clip, medium - Qty 1 Screw, long - Qty 1 Screw, short - Qty 1 Nut - Qty 2 Ring Seal - Qty 1 Nut - Qty 1 Washer - Qty 1 Ceramic Seal - Qty 1 Outlet Hose, Pump - Qty 1 Clip, small - Qty 2 Compatible Models 58060 58260 58080 58280 58020 58220 58040 58240 Specifications: Type: Service Kits Box Dimensions: 5"H x 7"W x 14"L WT: 2.15 lbs UPC: 671880597548

Read more less

Impeller Kit 9-45700RTake good care of the cooling system - change to a new impeller every year!

Read more less

Stainless Steel Hose Barb Thru-Hull Fitting - 1/2" Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B Specifications: Hose Size: 1/2" Material: Stainless Steel Box Dimensions: 3"H x 3"W x 4"L WT: 0.45 lbs UPC: 742985142121

Read more less

1100GPH Electronic Sensing Bilge Pump - 24VIn the next generation sensing bilge pumps, the 1100GPH 24V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8" Great idea when power conservation is needed and as an added benefit, no float switch is needed!All that plus the added benefits of our standard bilge pump: Check valve included with hidden air vent to prevent airlocking True electromagnetic suppression (EMC) A built-in thermal cell that protects the pump and the vessel when things get too hot These are the smallest automatic pumps available on the market!!! Features: Completely automatic with manual override - No Float Switch Needed! Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 1100 GPH Operation: Automatic Volts: 24v Box Dimensions: 4"H x 7"W x 7"L WT: 1.2 lbs UPC: 042237104816

Read more less

Motor Cover for 37010 SeriesJabsco's Motor Cover for 37010 Series Electric ToiletsWARNING: This product can expose you to chemicals including Vinyl Chloride which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Impeller Kit - 9 Blade - Nitrile - 3-3/4" Diameter x 3-1/2" W, 1" Shaft DiameterFeatures: Material: Nitrile Drive Type: Spline Drive Number of Blades: 9 Dimensions: Diameter: 3-3/4", Shaft Diameter: 1", Shaft Width: 3-1/2" Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Discharge Port - 1-1/4"Features: 1-1/4" Discharge Port

Read more less

Supersub 12V 1100GPH Low Profile Automatic Bilge PumpThe narrow low profile compact bilge pump range.Supersub Family- Narrow, low profile bilge pump fits deep down in small/ awkward bilge spaces where other pumps won't fit.Features Low narrow design for confined bilge spaces Easy installation - outlet and pump body rotate to suit your installation High performance - Flow up to 1100 US gals per hour Efficient operation - Very low power consumption Easy to clean- snap fit assembly Low profile strainer - Leaves the bilge almost dry WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 1100 GPH Operation: Automatic Outlet Size: 1" or 1-1/8" Volts: 12v Type: Electric Box Dimensions: 3"H x 7"W x 12"L WT: 1.2 lbs UPC: 766478945099

Read more less

MK5 Handle AssemblyStainless steel handle assembly with lanyard for MK5 pumpsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Gusher 10 MK2/3 Service Kit NitrileFeatures: High-quality replacement Nitrile parts for popular Gusher 10 pumps Includes the pump’s diaphragm, valves, and circlips Production parts, so they will install and fit properly Replacement parts deliver the same outstanding performance as the original components For oil and diesel applications Durable, reliable direct replacements

Read more less

Perko 1-1/8" Thru-Hull Connection f/ use with Hose Chrome Plated BronzeFlange is machined to fit and grooved to retain bedding compound neck isthreaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versons Regular Length- Fits maximum hull thickness up to 2 inchesShort Length- For thin hull sections up to 5/8 inches maximumRegular Length - Chrome Plated Bronze Technical Information: Hose Size Inches: 1-1/8 Mounting Hole Diameter Inches: 1-5/16 Maximum Hull Thickness Inches: 1-3/4 O.D. Flange Inches: 2-1/4 Model Number: 035006ADPC Ship Weight: 4.6/8.9 lbs. Made in the USA Specifications: Hose Size: 1-1/8" Material: Bronze Box Dimensions: 3"H x 3"W x 5"L WT: 0.9 lbs UPC: 085226036118

Read more less

HotShot HD6 Heavy Duty Washdown Pump with 25' HoseCoil - 12V - 6 GPM - 70 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' deluxe HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 70 Gallons Per Minute: 6 GPM Box Dimensions: 6"H x 12"W x 17"L WT: 12.1 lbs UPC: 671880842013 Brochure (pdf)

Read more less

1-1/4" NPT Bronze 45 Degree Pipe to 1-1/4" Hose Features: 45 degree Male NPT x Hose connection C83600 Bronze Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems. Specifications: Thread NPT: 1-1/4" Hose ID (id): 1-1/4" Specifications: Construction: Bronze Box Dimensions: 2"H x 3"W x 4"L WT: 0.55 lbs UPC: 742985157743

Read more less

Par-Max 2 Water Pressure Pump - 12V - 2 GPM - 35 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 35 Gallons Per Minute: 2 GPM Box Dimensions: 6"H x 6"W x 16"L WT: 4.9 lbs UPC: 671880841764 Brochure (pdf)

Read more less

Electric Field Bilge Switch With Time DelayAll Whale bilge switches are designed and manufacturers with highest quality at heart. Combine these accessories with your whale bilge pump for a robust bilge system tailored to your vessel.Features and Benefits Environmentally friendly - no toxic mercury Easy to install mounted on either horizontal or vertical surface (e.g.bulkhead or hull) Suitable for installations where amp draw is up to 15 amps Compact design WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Switches Box Dimensions: 2"H x 5"W x 7"L WT: 0.4 lbs UPC: 766478953025

Read more less

Cartridge Bilge Pump 750GPH - 12VSubmersible bilge pump 12V with pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 0,9m (3ft) head. Stainless steel shaft, compact and easy to install.Features: Tough thermoplastic ABS housing with detachable universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation  Replaceable cartridge motor  Easy maintenance and low power consumption Specifications: Including 19 mm (3/4″) straight and elbow detachable discharge ports  Amperage: 2,7 A  Fuse Size: 5A  For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length Specifications: Gallons Per Hour: 750 GPH Gallons Per Minute: 12 GPM Type: Electric Volts: 12v Operation: Non-Automatic Outlet Size: 3/4" Box Dimensions: 2"H x 4"W x 5"L WT: 0.85 lbs UPC: 7340176600028

Read more less

Cartridge Aerator Pump - 500 GPS - 12V - AngledCartridge Aerator Pump 12V with flowrate 32l/min (500GPH) with angeled intake.Features:Easy to install, maintain and to replace the cartridgeSpecifications: Equipped with both straight and elbow 19mm (3/4″) detachable ports  Amperage: 1,8A  Fuse size: 5A Specifications: Volts: 12v Gallons Per Hour: 500 GPH Box Dimensions: 3"H x 8"W x 9"L WT: 0.75 lbs UPC: 7340176604125 Brochure (pdf)

Read more less

RT3000 Swim 'N Rinse Compact Deck Shower - Cold OnlyThis easy to use compact shower is the simple deck shower solution. The shower boasts high performance levels while the one touch trigger allows effortless control and uses high quality marine grade materials ensuring reliability. The shower is also simple to install with an angled holder and is virtually maintenance free.Features: Easy to use One hand trigger High performance Great flow and pressure Ease of Installation Straight or angled holder Quality and reliability Long-life marine grade materials WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Garboard Drain Plug Cast BronzeAttwood's Bronze Garboard Drain Plug reliably provides bilge drainage when hauling out, and it seals securely when not draining. It has machined and tapered pipe threads to ensure a watertight plug fit, and the nut can be removed with a wrench or pliers. This drain plug has a 3/8-inch neck depth and a ½-inch NOT drain. It installs easily and securely using #8 screws in 3 countersunk holes.

Read more less

Replacement Cartridge for 500GPH - 12VAlbin Group's replacement cartridge for 500 GPH and 12V.

Read more less

Replacement Cartridge for 750 GPH - 12VAlbin Group's replacement cartridge for 750 GPH and 12V.

Read more less

HotShot HD5 Heavy Duty Washdown Pump - 12V - 5 GPM - 70 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer Trigger nozzle & Quick Connect hose adapters  No kit versions with hose offered WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 5 GPM Volts: 12v Max PSI: 70 Box Dimensions: 6"H x 8"W x 17"L WT: 9.1 lbs UPC: 671880841962 Brochure (pdf)

Read more less

Par-Max 1 Water Pressure Pump - 12V - 1 GPM - 35 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 35 Gallons Per Minute: 1 GPM Box Dimensions: 2"H x 6"W x 6"L WT: 2.2 lbs UPC: 671880841757 Brochure (pdf)

Read more less

HotShot 3 Washdown Pump - 12V - 3 GPM - 50 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  Inline 40 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  No kit versions with hose offered WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 50 Gallons Per Minute: 3 GPM Box Dimensions: 5"H x 6"W x 15"L WT: 5.1 lbs UPC: 671880841818 Brochure (pdf)

Read more less

Gusher® Galley MK3 Service KitService Kit with Complete Set of Serviceable Parts for Whale Gusher® Galley MK3.Includes: Small O-ring (2) Valve (4) Valve stem (4) Large O-ring (4) Self tapping screw (4) Sealing washer (1) Diaphragm (2)

Read more less

MegaPress 3/4" 90° Copper Nickel Elbow - Double Press Connection - Smart Connect TechnologyFeatures: Size: 3/4" CuNiFe 90/10 Press connection Components: FKM sealing element

Read more less

MegaPress 3/4" 45° Copper Nickel Elbow - Double Press Connection - Smart Connect TechnologyFeatures: Size: 3/4" CuNiFe 90/10 Press Connection Components:FKM sealing element

Read more less

MegaPress 3/4" Stainless Steel 304 Tee - Triple Press Connection - Smart Connect TechnologyFeatures: 304 stainless steel Press connection Components:FKM sealing elements Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 3"W x 5"L WT: 0.6 lbs UPC: 691514951102 Quick Guide (pdf)Brochure (pdf)

Read more less

Cartridge Aerator Pump - 500 GPH - 12V - StraightCartridge Aerator Pump 12V with flowrate 32l/min (500GPH) with straight intake.Features:Easy to install, maintain and to replace the cartridgeSpecifications: Equipped with both straight and elbow 19mm (3/4″) detachable ports  Amperage: 1,8A Fuse Size: 5A Specifications: Volts: 12v Gallons Per Hour: 500 GPH Box Dimensions: 3"H x 4"W x 8"L WT: 0.65 lbs UPC: 7340176604118 Brochure (pdf)

Read more less

Cartridge Aerator Pump - 750 GPH - 12V - AngledCartridge Aerator Pump 12V with flowrate 50l/min (750GPH) with angeled intake.Features:Easy to install, maintain and to replace the cartridgeSpecifications: Equipped with both straight and elbow 19mm (3/4″) detachable ports  Amperage: 2,7A  Fuse Size: 5A Specifications: Volts: 12v Gallons Per Hour: 750 GPH Box Dimensions: 3"H x 8"W x 9"L WT: 1.05 lbs UPC: 7340176604149 Brochure (pdf)

Read more less

Cartridge Aerator Pump - 1100 GPH - 12V - AngledCartridge Aerator Pump 12V with flowrate 75/min (1100GPH) with angeled intake.Features:Equipped with straight fixed 29mm (1,15″) port Specifications: Amperage: 4A  Fuse Size 5A Specifications: Volts: 12v Gallons Per Hour: 1100 GPH Box Dimensions: 3"H x 8"W x 8"L WT: 1 lbs UPC: 7340176604163 Brochure (pdf)

Read more less

WPS/WD Inlet Strainer 40 MeshInlet strainer 40 mesh universal quick connect for WPS/ WD pump inlets. Protects the pump to ensure long service life and optimal performance.Features:Easy regular maintenance by just opening the lid and cleaning the inside filter metal mesh Specifications: Material: Nylon Box Dimensions: 1"H x 3"W x 3"L WT: 0.2 lbs UPC: 7340176600721

Read more less

BM-12 Monel Basket - 3.1" x 11.9"Replacement Monel Raw Water Strainer Baskets are made of high-strength, corrosion-resistant Monel and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches in length, and from 1.9 to 3.1 inches in diameter. Fits:ARG-3015

Read more less

Stainless Steel Hose Barb Thru-Hull Fitting - 1-1/4" Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B Specifications: Hose Size: 1-1/4" Material: Stainless Steel Box Dimensions: 3"H x 3"W x 5"L WT: 1 lbs UPC: 742985139008

Read more less

Bronze Hose Barb Thru-Hull Fitting - 1-1/4" Features: NPS Thread With Hose Connection C83600 Bronze UL Listed 647B Specifications: Hose Size: 1-1/4" Material: Bronze Box Dimensions: 3"H x 3"W x 4"L WT: 1.05 lbs UPC: 742985005235

Read more less

Bronze Hose Barb Thru-Hull Fitting - 1" Features: NPS Thread With Hose Connection C83600 Bronze UL Listed 647B Specifications: Hose Size: 1" Material: Bronze Box Dimensions: 3"H x 3"W x 4"L WT: 0.7 lbs UPC: 742985005228

Read more less

1" Bronze Pipe Nipple Check ValveFeatures: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C) Specifications: Construction: Bronze Box Dimensions: 2"H x 2"W x 3"L WT: 0.4 lbs UPC: 742985168374 Brochure (pdf)

Read more less

3/4" Bronze Pipe Nipple Check ValveFeatures: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C) Specifications: Construction: Bronze Box Dimensions: 1"H x 1"W x 2"L WT: 0.35 lbs UPC: 742985168367 Brochure (pdf)

Read more less

3/8" NPT Bronze In-Line Ball ValveFeatures: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole to accept standard ratchet to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves 400 WOG rated Full flow C83600 bronze construction Stainless steel handle and hardware Chrome plated solid brass ball (not a hollow ball) PTFE seats and seals Bonding attachment UL listed for fuel or water Fits IBVF for Seacock Application Specifications: Construction: Bronze Box Dimensions: 2"H x 4"W x 5"L WT: 0.55 lbs UPC: 742985141827

Read more less

Bilge Pump Heavy Duty 1750 GPH - 24VSubmersible heavy duty bilge pump 24V with pump capacity 110 L/min (1750 GPH) and 85 L/min (1350 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design.Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. Features: Heavy Duty Submersible For pleasure or commercial boats above 10m (30 Ft) length  Interchangeable with Rule 1500, Johnson Pump 16084-00/32-1600-02 Specifications: Weight: 0.7 kg/1 lb Dimensions: 150/6L x 170/6.7H x 130/5W mm/in  Fuse: 3A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Electric Gallons Per Hour: 1750 GPH Gallons Per Minute: 29 GPM Operation: Non-Automatic Outlet Size: 1-1/4" or 1-1/2" Volts: 24v Box Dimensions: 6"H x 7"W x 8"L WT: 4.6 lbs UPC: 7340176600110

Read more less

Bilge Pump Heavy Duty 2250 GPH - 24VSubmersible heavy duty bilge pump 24V with pump capacity 140 L/min (2250 GPH) and 120 L/min (1900 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design.Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. Features: Heavy Duty Submersible For pleasure or commercial boats above 12m (36 Ft) length. Interchangeable with Rule 2000, Johnson Pump 22084/32-2200-02 Specifications: Weight: 0.9 kg/1 lb Dimsensions: 150/6L x 170/6.7H x 130/5W mm/in  Fuse: 4,5A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Electric Gallons Per Hour: 2250 GPH Gallons Per Minute: 37 GPM Operation: Non-Automatic Outlet Size: 1-1/4" or 1-1/2" Volts: 24v Box Dimensions: 6"H x 7"W x 8"L WT: 4.5 lbs UPC: 7340176600134

Read more less

50' Blue Coiled Hose with Adjustable NozzleFeatures: 50' Blue Coiled Hose with Nozzle Male fitting: 3/4" Female Fitting: 3/4" Material: Polyrethane Hose Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 12"W x 18"L WT: 2.85 lbs UPC: 725060044237

Read more less

Perko Vented Flip Top Cap f/Fills with 1-1/2" Hose Black Polymer Easily Mounts Directly on Gunnel with Removing Fill Body Includes Metallic Inserts for Gas, Diesel or Water Fills Integral Tank Vent with Flame Arrestor No Deck Plate Key or Ground Wire Required Flip Top Cap Technical Information Requires 5-1/4" Diameter Mounting Surface Screw Size: #8

Read more less

Seaward 6 Gallon Hot Water Heater - Stainless Steel - 120V - 1500WWhale Electric Water Heaters includes model with the very latest technology. All heaters are manufactured from the highest quality materials and designed to specifically withstand harsh marine conditions.Water Heaters with a Stainless Steel cover offer high levels of corrosion resistance with a modern stainless steel finish. These heaters are a bit lighter than those wearing the galvanized outer cover and heavier than the epoxy coated versions.Features and Benefits: Horizontal Mounting only   Robust Manufacturing Hold down brackets welded to inner tank Safety controls   Integrated pressure relief valve Temperature and pressure drain tube included   Magnesium anodes available separately Recommended to prevent corrosion and ensure a longer Water Heater life   Sturdy, robust exteriors Ignition protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 6 Heat Exchanger: No Volts: 120v Box Dimensions: 14"H x 14"W x 22"L WT: 23.6 lbs UPC: 766478948267 Brochure (pdf)

Read more less

Cockpit Drain - No ScreenFor use with 1-1/2" I.D. hose as part of a self-bailing cockpit system. Features short stem and narrow flange for installing through cockpits. Polypropylene construction.Specifications: Stem Length: 3-3/4" Max. Hull Thickness: 1-1/2" Flange Diameter: 2-1/8" Installation Hole Size: 1-7/8" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

FW0814 WaterMaster Automatic Pressure Pump - 8L - 30PSI - 12VWaterMaster FW0814 is a pump from Whale with a compact sleek design that is easy to install and maintain.Features: 8L per minute flow rate 30PSI 12V Internal pressure switch controlled (no external switching required) Fully sealed protective motor housing Completely integrated electronics Runs dry without damage (within reason) Includes a strainer to protect the pump from debris Self priming upto 3m (10ft) Easy installation - suitable for 15mm quick connect plumbing or 1/2" hosetails Suitable for use with salt or fresh water Quit operation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 2 GPM Max PSI: 30 Volts: 12v Box Dimensions: 6"H x 8"W x 10"L WT: 4.1 lbs UPC: 766478946881

Read more less

Supersub 12V 500GPH Low Profile Non-Automatic Bilge PumpThe narrow low profile compact bilge pump rangeSupersub Family- Narrow, low profile bilge pump fits deep down in small/ awkward bilge spaces where other pumps won't fit.Features and Benefits Low narrow design for confined bilge spaces Easy installation - outlet and pump body rotate to suit your installation High performance - Flow up to 1100 US gals per hour Efficient operation - Very low power consumption Easy to clean- snap fit assembly Low profile strainer - Leaves the bilge almost dry WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 3"H x 7"W x 12"L WT: 0.8 lbs UPC: 766478951014

Read more less

Gusher 10 Manual Bilge Pump Thru Deck/Bulkhead MountWhale's long life diecast alloy range - robust designs for extreme conditions.Install Gusher 10 for the long haul.Features Durable Diecast Alloy Bilge Pump Robust design stands up to the toughest marine conditions Top performance- High flow non-choke valves, 65 ltrs (17 US gals) per minute 3 mounting options available Bulkhead, floor or thru deck mounting Designed for simple installation and maintenance Efficiency - Large non-choke valves Ideal for workboats, cruisers, offshore racing Easy pump action - Self priming Suitable for diesel transfer with Nitrile diaphragm (service kit AK3714 available separately) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 1020 GPH Gallons Per Minute: 17 GPM Type: Manual Box Dimensions: 9"H x 9"W x 13"L WT: 6 lbs UPC: 766478374004

Read more less