Rule-Mate 2000 GPH 24 Volt Fully Automated Bilge PumpThe Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8". Rule-Mate IntelligenceRule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8". 2000 GPH (7570 LPH) at 0' (27.2V) All-in-one pump and switch Extra long life heavy duty motor 1" NPS discharge with 1" AND 1 1/8" screw-on ports Three year warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Operation: Automatic Gallons Per Minute: 33.3 GPM Gallons Per Hour: 2000 GPH Type: Electric Box Dimensions: 5"H x 7"W x 8"L WT: 4.35 lbs UPC: 042237114303 Owner's Manual (pdf)

Read more less

HotShot HD6 Heavy Duty Washdown Pump - 12V - 6 GPM - 70 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' deluxe HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 70 Gallons Per Minute: 6 GPM Box Dimensions: 6"H x 8"W x 18"L WT: 10 lbs UPC: 671880842006 Brochure (pdf)

Read more less

Straight Discharge AdapterRaritan's Straight Discharge Adapter is for 90° to Straight.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 3"H x 4"W x 4"L WT: 0.21 lbs UPC: 085462000560

Read more less

1-1/2" NPT Bronze 3-Way Valve Features: 3-way valve operates logically - The handle points to the direction of flow Center position is "off" Handle rotates a full 180°. Mount foot included. Full flow.   Stainless steel handle and hardware.  PTFE seats and seals.  TWV-1500 size is ideal for waste systems.  UL listed for fuel or water. Specifications: Construction: Bronze Box Dimensions: 5"H x 5"W x 10"L WT: 5.45 lbs UPC: 742985142947

Read more less

IC Retail Kit 24V Gulper IC Pump & Strainer ICAt the heart of every Whale IC product lies innovative electronic control circuitry.This enables IC sensor accessories to communicate directly with IC pumps to control their performance.Features & Benefits: Save time and money by reducing four separate components to one pre-wired system. Remote mounting automatic Gulper IC receives signals from Strainer IC and switches on and off automatically Pre-wired and assembled - just connect power Remote mounted pump for easy inspection- high, dry and protected Soft start - protects the pump for long life Small footprint strainer fits into very confined bilge spaces Low current controlled switching - no switch failure from high currents On/off delay - prevents cycling Environmentally friendly - no mercury Time delay to allow for optimum drainage Override wire included to allow for manual activation Non-choke valves - no filter to block/clean Long life - pump self primes and runs dry without damage WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Type: Electric Box Dimensions: 7"H x 8"W x 12"L WT: 5.2 lbs UPC: 766478945709

Read more less

Elegance Replacement Shower MK2 HandsetFeatures: Applications: White Mk2 models RT1500, RT2500, RT1470, RT2498  This handset will only fit units manufactured after 1996 that have a metal threaded connector at the end of the hose. Specifications: Robust ABS construction Design for use with all types of galley pumps Connects to Whale Quick Connect 15 mm pipework/ 3/8" or 1/2" hose connections Standard and extended spout models available Choice of single or mixer faucets Designed, refined, and made in our UK facility since the early 1980s

Read more less

800 GPH Livewell Pump Replacement Motor CartridgeThe innovative GPH Livewell Pumps feature removable motor cartridges, which are fast and convenient to replace.Features: 800 GPH Replacement Specifically for GPH Livewell Pumps Quick Guide (pdf)

Read more less

1-1/4" Safety Seacock w/1" Side Port Features: Two driver ports permit handle relocation. NPT threaded side port accepts SSCV or any NPT threaded accessory. Handle has square hole that accepts standard ratchet; helps access hard-to-reach valves, or ease actuation of hard-to-operate valves. Full flow. Serviceable while installed. C84400 bronze construction. Stainless steel ball and stem. Base has bonding attachment. PTFE seats and seals.   ***Add a GROCO Bilge Strainer to pump out remote bilge locations.  

Read more less

Drain Plug for ARG Strainer 2009 & Newer - No O-RingDrain plug W/O O-ring for ARG Strainer. For Strainers older than 2008 use ARG-506.

Read more less

3/4" Fresh Water Strainer with Plastic Basket Features: Protect fresh water pumps from debris.   White nylon strainer head and clear plastic sight glass.  Glass unscrews for filter basket cleaning.  Mount bracket included. Use WSB-P for salt-water or continuous duty AC or genset.  Specifications: Material: Plastic Box Dimensions: 4"H x 5"W x 7"L WT: 0.6 lbs UPC: 742985133624

Read more less

Seaward 11 Gallon Hot Water Heater with Front Heat Exchanger - White Epoxy - 120V - 1500WWhale Electric Water Heaters includes models with the very latest technology. All heaters are manufactured from only highest quality materials and designed to specifically withstand harsh marine conditions.The White Epoxy Coated Aluminium cases are well-suited to install in many of today's engine rooms. Their white appearance blends in well with existing equipment and the coated aluminium material offers corrosion resistance.Features and Benefits Multiple versions to suit your installation Robust Manufacturing Safety controls Magnesium anodes available separately Sturdy, robust exteriors Ignition protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SuperSwitch™ Float Switchw/ Fuse HolderNow backed by a 5 year warranty, the non-mercury SuperSwitch is designed for the toughest applications. Design includes marine grade 14 gauge blocked wire, larger float for increased buoyancy, removable base for easy servicing and a snap switch design capable of handling pumps drawing up to 20 Amps.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12/24/36v Type: Switches Box Dimensions: 3"H x 9"W x 11"L WT: 0.4 lbs UPC: 042237095527 Owner's Manual (pdf)

Read more less

4" Continuous Duty Flangemount Blower - 115V, 250 CFMThe Jabsco continuous duty 4-inch flange-mount blower, with a 115 Volt Motor. This is rated for 250 CFM. The Jabsco AC blowers are ideal for ventilating equipment areas. They may also be used for engine room ventilation on vessels with diesel-powered engines only. The blower is also suitable for general air circulation when AC power consumption is preferred. Flangemount Blowers are generally mounted with the discharge port fastened directly to a flat external surface to minimize required ducting. The inlet port can then be connected with a duct hose to the area requiring ventilation. Standard models are rated for intermittent service, 15 minutes maximum. These commercial-duty blowers are rated for continuous service. The blower housing flange should be mounted on a flat bulkhead surface. Selection of a dry, cool location will prolong motor life.This blower is not ignition-protected. Do not use to exhaust flammable vapors such as gasoline fumes, or in areas that may contain flammable vapors.Specifications: Rated for 250 CFM 115V Extended Life Induction Motor Tough Reinforced Thermoset Plastic Housing Continuous-Duty Motor with Thermal Overload Protection Slip-on Inlet Ducting Connection Efficient High Volume Air Flow Low Current Draw Corrosion-Resistant Materials Throughout

Read more less

Deluxe Flush Pump Assembly - 24VThe Jabsco 58103-1024 is a Deluxe Flush Pump Assembly, 24 V DC, for a Jabsco Pump.Specifications: Packaged Dimensions: L:30.00 x H:20.00 x W:20.00 cm Actual Weight: 4.22 kg  (Approx. 4.72 kg packed)

Read more less

Rule 4000Non-Automatic 12vDesigned for the toughest applications, the 4000 gph (15140 lph) pump optimizes Rule's exclusive design features to produce the highest capacity available for a pump its size. 2" (51mm) discharge outlet. 12 Volts DC unless noted.Voltage: 12 Vdc Amp Draw: 15.5 amp Fuse Size 25 amp Height: 7 3/4 inches 196.8 mm Width: 4 7/8 Inches 124 mm Weight: 5-8 lb 2.5 kg WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 4000 GPH Operation: Non-Automatic Outlet Size: 2" Volts: 12v Type: Electric Box Dimensions: 7"H x 8"W x 11"L WT: 5.9 lbs UPC: 042237083487 Owner's Manual (pdf)

Read more less

5/8" ID x 50' Wash Down/Camper Hose with FittingsThe Trident Wash Down Hose is constructed with a white FDA-grade PVC tube and cover. With heavy-duty 3-ply reinforcement, it ensures maximum kink resistance and long life. Trident Wash Down Hose offers long-lasting flexibility and superior abrasion resistance. Complete with nickel-plated solid brass fittings that are built to last without leakage. Features: Construction: FDA-grade white PVC Reinforcement: Heavy-Duty 3 Ply Polyester Reinforcement   Temperature Range: -20°F to 150°F (-28.9ºC to 65.6ºC)  Warranty: 10-Year Specifications: ID Diameter (inches): 5/8" Length (Feet): 50 Box Dimensions: 4"H x 15"W x 15"L WT: 7 lbs UPC: 704917017860 Brochure (pdf)

Read more less

5/8" ID x 75' Wash Down/Camper Hose with FittingsThe Trident Wash Down Hose is constructed with a white FDA-grade PVC tube and cover. With heavy-duty 3-ply reinforcement, it ensures maximum kink resistance and long life. Trident Wash Down Hose offers long-lasting flexibility and superior abrasion resistance. Complete with nickel-plated solid brass fittings that are built to last without leakage. Features: Construction: FDA-grade white PVC  Reinforcement: Heavy-duty 3 Ply Polyester Reinforcement   Temperature Range: -20°F to 150°F (-28.9ºC to 65.6ºC)  Warranty: 10-Year Specifications: ID Diameter (inches): 5/8" Length (Feet): 75 Box Dimensions: 5"H x 15"W x 15"L WT: 11.3 lbs UPC: 704917017907

Read more less

5/8" ID x 25' Wash Down/Campoer Hose with FittingsThe Trident Wash Down Hose is constructed with a white FDA-grade PVC tube and cover. With heavy-duty 3-ply reinforcement, it ensures maximum kink resistance and long life. Trident Wash Down Hose offers long-lasting flexibility and superior abrasion resistance. Complete with nickel-plated solid brass fittings that are built to last without leakage. Features: Construction: FDA-grade white PVC Reinforcement: Heavy-Duty 3 Ply Polyester Reinforcement Temperature Range: -20°F to 150°F (-28.9ºC to 65.6ºC)  Warranty: 10-Year Specifications: ID Diameter (inches): 5/8" Length (Feet): 25 Box Dimensions: 3"H x 13"W x 13"L WT: 4 lbs UPC: 704917017853 Brochure (pdf)

Read more less

Siphon-Mate Siphon PumpSpecialty Transfer PumpSafety experts caution against the unsafe practice of siphoning petroleum by mouth, warning specially, that it can result in loss of life. Beckson's answer is the patented Siphon-Mate pump; a combination displacement lift pump and siphon pump with valves suitable for transferring fuel. Pump half strokes to start flow. Once flow begins, fully extending the handle will allow siphoning provided that the source is higher in elevation than the receptacle. Supplied with clear tubing to allow versatile application. Cut tubing for desired length of intake and discharge hose. When finished siphoning or pumping flammable liquids, be sure to drain siphon pump of liquid before storing. This pump not intended for transfer of liquid over 120 degrees F (49 degrees C) nor solvents that will attack PVC.Features Use for diesel, oil, water Length: 11-1/2" (28.4cm) Diameter: 1-1/4" (32mm) Lifts: 4 oz (.12 L) per stroke WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Manual Box Dimensions: 2"H x 9"W x 14"L WT: 1 lbs UPC: 021083000299

Read more less

1-1/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - BlackTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 1-1/4" / (mm) 31.8 Outer Diameter: (inch) 1.40" / (mm) 32 Working Pressure: (Psi) 70 / (bar) 4.8 Bend Radius: (inch) 1.5" / (mm) 38 Weight: (Lb./50ft.) 35 / (Kg/m) 15.7 *Burst Pressure is 4 x Working Pressure Specifications: ID Diameter (inches): 1-1/4" Length (Feet): 50' Box Dimensions: 5"H x 26"W x 26"L WT: 31.8 lbs UPC: 704917004525 Quick Guide (pdf)

Read more less

Seaward 11 Gallon Hot Water Heater with Front Heat Exchanger - Galvanized Steel - 120V - 1500WWhale Electric Water Heaters includes models with the very latest technology. All heaters are manufactured from only highest quality materials and designed to specifically withstand harsh marine conditions.The Marine Galvanized Steel Cover offers corrosion resistance at an affordable price. This material weighs more than the other case options but is made from a strong and robust material.Features and Benefits Multiple versions to suit your installation Robust Manufacturing Safety controls Magnesium anodes available separately Sturdy, robust exteriors Ignition protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 11 Heat Exchanger: Yes Volts: 120v Box Dimensions: 17"H x 17"W x 25"L WT: 33.4 lbs UPC: 766478947901

Read more less

Gulper Grouper Mk3 Fishbox/Waste Pump w/90° Ports - 12VNon clog electric Waste pumps without filters, built on more than a decade of market leading valve technology.Proven Diaphragm TechnologyWhale Gulper waste products have been at the forefront of marketing leading waste technology for over 2 decades. Rather than impeller motors, Gulper pumps contain reciprocating heavy duty diaphragms and specialized non-choke valves to handle grey, bilge, black and fishbox waste on board.Ideal Macerator Replacement in Fishbox InstallationsThe Gulper Grouper Mk 3 builds on the decades of proven pump technology and now features 90° inlet and outlet ports with integrated non-choke valves. The improved design allows the pump to be used as a direct replacementfor macerator impeller pumps. Compared to typical macerators, the Gulper Grouper Mk 3 is quieter and lightweight. With diaphragm technology, the pump does not clog or suffer from motor burn out meaning a longer system life and less unwanted maintenance jobs! With a low power consumption and run dry capability the Gulper Grouper Mk 3 really is the pump of choice for fishbox evacuation.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inlet Style: Angled Type: Waste Pumps Box Dimensions: 6"H x 6"W x 14"L WT: 4.9 lbs UPC: 766478949592 Brochure (pdf)

Read more less

4" x 50' Blue Polyduct Blower HoseTrident Polyduct is the most flexible, crush-proof, and rugged blower duct hose for heat, ventilation, and air conditioning* (HVAC)—heavy-duty polypropylene hose, reinforced with a flexible polypropylene rod helix.Features: Excellent flexibility & compressibility Excellent resistance to crushing, flex fatigue, tearing, and moisture  Stomp on it and it returns to shape without damage  Shove it through tight openings and overheads, and it delivers full airflow Application:Rugged blower duct hose for heat, ventilation, and air conditioningSpecifications: Temperature Range: -40°F to +225°F (-40°C to 107°C) (when insulated) Length (feet): 50' Boxed Inner Diameter (inch): 4" *Meets FMVSS 302 flame resistance Specifications: ID Diameter (inches): 4" Length (Feet): 50 Box Dimensions: 20"H x 20"W x 20"L WT: 9.5 lbs UPC: 704917015576

Read more less

3/8" x 50' Clear Reinforced PVC Hose Tubing Red & Blue TracerNylon reinforced. FDA compounded PVC for pressurized drinking water systems, etc. No taste or odor. #162=175 PSI (1.21Mpa). Operating temperatures +20° to +150° F (-7° to +66°C). NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. CA Prop 65 Compliant.Specifications: Sizes: 3/8" to 1", 9.5 mm & 25.4 mm Colors: #164 - White with Blue Tracer, #162 - Clear with Blue & Red Tracer Packing: 250’ (76m) Coil, 50’ (15m) Boxed, 25’ (7.6m) Boxed Specifications: ID Diameter (inches): 3/8" Length (Feet): 50 Box Dimensions: 4"H x 18"W x 19"L WT: 5.8 lbs UPC: 704917006819

Read more less

1/2" x 50' Clear Reinforced PVC Hose Tubing Red & Blue TracerNylon reinforced. FDA compounded PVC for pressurized drinking water systems, etc. No taste or odor. #162=175 PSI (1.21Mpa). Operating temperatures +20° to +150° F (-7° to +66°C). NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. CA Prop 65 Compliant.Specifications: Sizes: 3/8" to 1", 9.5 mm & 25.4 mm Colors: #164 - White with Blue Tracer, #162 - Clear with Blue & Red Tracer Packing: 250’ (76m) Coil, 50’ (15m) Boxed, 25’ (7.6m) Boxed Specifications: ID Diameter (inches): 1/2" Length (Feet): 50 Box Dimensions: 4"H x 18"W x 19"L WT: 7 lbs UPC: 704917006840

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (3/4" – 1-1/8") Clamping Range - 10-Pack - SAE Size 10Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 10 Hose Inner Diameter: (inch) 1/2" – 5/8" Clamping Range: (inch) 3/4" – 1-1/8" / (mm) 19-28 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-1/16" – 1-1/2") Clamping Range - 10-Pack - SAE Size 16Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 16 Hose Inner Diameter: (inch) 7/8" – 1" Clamping Range: (inch) 1-1/16"– 1-1/2" / (mm) 26-38 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 5/8"–15/16" Clamping Range - 10-Pack - SAE Size 8Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 8 Hose Inner Diameter: (inch) 3/8" – 1/2" Clamping Range: (inch) 5/8" – 15/16"  / (mm) 15-24 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (5/8" – 15/16") Clamping Range - 10-Pack - SAE Size 8Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 8 Hose Inner Diameter: (inch) 3/8" – 1/2" Clamping Range: (inch) 5/8" – 15-16" / (mm) 15-24 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 7/16"–21/32" Clamping Range - 10-Pack - SAE Size 4Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 4 Hose Inner Diameter: (inch) 1/4" – 5/16" Clamping Range: (inch) 7/16" – 21/32"  / (mm) 11-17 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

Aqua-Life® Aerator Dual Output 110V - Greater Than 100 GallonsAqua-Life® Products run so quietly you'll forget you are aerating your bait. You'll know you are by the healthy condition of your bait. Aqua-Life® products feature a whisper quiet motor that runs efficiently at a low volume. Aqua-Life® products also utilize a special micro-bubble oxygen diffuser that produces clouds of tiny bubbles. Smaller more numerous bubbles mix readily as they collide and dispense through the entire water column. In bait containers smaller bubbles are important as they are less prone to damage delicate baitfish. Each Aqua-Life® product includes the diffuser and a 30 inch non-kink air hose. (Hoses and stones also sold separately as an accessory.)Features: Dual pumps-aerates 1 or 2 livewells (Up to 100 gallons) Produces close to 100% saturation of dissolved oxygen Rubber marking feet UL approved 6' power cord Includes: 10ft of flexible air hose, 2 each 3" long air stones, t-connector, 2 anti-siphon valves Specifications: Volts: 110v Box Dimensions: 6"H x 10"W x 10"L WT: 2.15 lbs UPC: 082271214218

Read more less

120V AdapterPower your Aqua-Life® aerator at home for longer time periods with this 120V Adaptor.Features: For use 1435, 1437, 1409, 1469, 14351, 14371 & 14691 4" x 2.4" x 18" Specifications: Volts: 120v Width: 4" Length (Inches): 7" Height: 2" Box Dimensions: 2"H x 4"W x 7"L WT: 0.39 lbs UPC: 082271314307

Read more less

Seaward 11 Gallon Hot Water Heater with Front Heat Exchanger - Galvanized Steel - 240V - 1500WWhale Electric Water Heaters includes models with the very latest  technology. All heaters are manufactured from only highest quality materials and designed to specifically withstand harsh marine conditions.The Marine Galvanized Steel Cover offers corrosion resistance at an affordable price. This material weighs more than the other case options but is made from a strong and robust material.Features and Benefits Horizontal Mounting only Robust Manufacturing Hold down brackets welded to inner tank Double wall heat exchangers Safety controls Integrated pressure relief valve Temperature and pressure drain tube included Magnesium anodes available separately Recommended to prevent corrosion and ensure a longer Water Heater life Sturdy, robust exteriors Ignition protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 11 Heat Exchanger: Yes Volts: 240v Box Dimensions: 17"H x 17"W x 26"L WT: 33.6 lbs UPC: 766478948304

Read more less

Perko 2" Seacock Ball Valve BronzeThese valve bodies are offered to meet the needs of applications thatrequire extra long, scoop or flush type thru-hulls.Cast Bronze.Technical Information: Flange Diameter Inches: 5-3/4" Overall Height Inches: 5-3/4" Pipe Size Inches: 2 Model Number: 0805009PLB Ship Weight: 11.0 lbs. *Overall height is measured from the top of the hose adapter to the bottomof the flange. Specifications: Construction: Bronze Box Dimensions: 7"H x 7"W x 10"L WT: 11.4 lbs UPC: 085226679599 Quick Guide (pdf)

Read more less

500 Bilge Pump - 12 VDC, 500 GPHQuality bilge pumps you can trust. SHURFLO's bilge pumps are built for the harsh marine environment to withstand the toughest conditions. Standard with 3' tinned wire assembly for below waterline installations and water cooled motors for extended life.Features: 3' Tinned Wire Assembly Anti-Airlock Tough Nylon Housing Ignition Protected Water Cooled Motors - Extended Life 3 Year Warranty CE Listed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Operation: Non-Automatic Gallons Per Hour: 500 GPH Type: Electric Box Dimensions: 3"H x 7"W x 9"L WT: 1.1 lbs UPC: 752324010080

Read more less

PWSA-751 Poly Basket Fits WSA-500,  WSB-500 & WSB-750Features: Poly Basket Fits WSA-500,  WSB-500 & WSB-750

Read more less

ARG-750 Series 3/4" Raw Water Strainer with Stainless Steel BasketFeatures: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel & Non-Metallic One-Piece Molded Sight Glass Eliminates Tie Rods and Gaskets Improved Drain Plug Non-Metallic Cap Magnifies Internal Viewing NPT or BSPP Threaded Ports Improved Basket Design C84400 bronze head casting UL Listed 255-D  Specifications: Material: Stainless Steel Box Dimensions: 5"H x 5"W x 10"L WT: 4.5 lbs UPC: 742985060623

Read more less

BS-8 Stainless Steel Basket - 3.1" x 12.4"GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design.Fits: ARG-2000 SA-2000 Specifications: Material: Stainless Steel Box Dimensions: 3"H x 3"W x 19"L WT: 0.5 lbs UPC: 742985175693

Read more less

BP-8 Poly Basket - 3.1 x 12.4"Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches in length, and from 1.9 to 3.1 inches in diameter.Fits: ARG-2000 SA-2000 Specifications: Material: Plastic Box Dimensions: 3"H x 3"W x 19"L WT: 0.3 lbs UPC: 742985175020

Read more less

1" Bronze In-Line Check ValveFeatures: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline Specifications: Construction: Bronze Box Dimensions: 3"H x 3"W x 5"L WT: 0.87 lbs UPC: 742985145955

Read more less

Replacement Cartridge for Tsunami 800 MK2Attwood replacement motor cartridge for T800 model Tsunami Series pumps.

Read more less

Wakeboard Ballast Puppy with Deutsch Connector - Replacement Pump Only - No SwitchChoose the Jabsco Ballast Puppy w/Deutsch Connector if you are replacing a Jabsco Ballast Puppy pump already installed in the boat. If installing a new automated system, your best option is the Jabsco Wakeboard Ballast Puppy Reversible Pump that is equipped with the pre-wired switch connector (18220-1127).Features: Fills an 800-pound bag in approximately 9 minutes and 5 seconds Power source: Plug-and-Wake Connector Type: Component reversible pump for automated ballast system Ignition Protected: Protects against ignition of fuel vapors or other combustibles. Thermal Damage Protection: The integrated Thermal Damage Protection circuit monitors the temperature of the pump motor and automatically shuts it off if conditions indicate water is no longer flowing through the pump. This innovative feature will prevent damage to the motor from overheating. Ignition Protected: Designed for safe installation in the bilge compartment of the boat without risk of fire or explosion due to fuel vapors. This feature alone is crucial for safe operation and is one important distinguishing factor between the Ballast Puppy and the similar pump to which it is often compared. *NOTE: Directly compatible with 2013 and newer Mastercraft boats. 2002-2012 MasterCraft boats will also need the WakeMAKERS Deutsch DTP to DT Wiring Adapter (see recommended accessories) for full compatibility.The Jabsco Ballast Puppy Reversible Ballast Pump is reliable, fast, and efficient. That is why it is the most popular ballast pump in wakeboarding. This is the pump that is used by Centurion, Mastercraft, Moomba, Nautique, and Supra boats to power their automated ballast systems, and the direct replacement for model 18670-6127.Reversible pumps simplify the design and reduce the number of components required for installation. Whether replacing a pump or installing a fully automated ballast system, this is one of the most popular ballast pumps on the market. This is the newest model of the Puppy pump and is a direct replacement for all previous models.Versatile, High Volume Connection OptionsThe unique design of the pump head features integrated hose barbs for use with 1" hose. Just slide the hose over the bronze inlet and outlet ports and secure with hose clamps.Additionally, 1/2" NPT female connections are provided for use with a smaller hose (use with optional 1/2" thread to 3/4" hose barb adapter to convert to 3/4" hose if necessary), giving you a multitude of connection options.Specifications: Fill Rate: This pump fills and drains at a rate of 88 pounds/min Flow Rate: 640 Gallons Per Hour / 10.6 Gallons Per Minute Physical Dimensions: 3-5/8" H x 4-3/4" W x 7-1/8" L Inlet/Outlet: 1" Hose Barb and 1/2" NPT Internal Thread Self-priming: Yes Safety Features: Ignition Protected Impeller Color: Green 1-year warranty

Read more less

1" NPS NPT Combo Bronze Thru-Hull Fitting with NutFeatures: NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 5" UL Listed 647B Available with (-W) or without nut (-L) BSPP and Stainless Steel models available Specifications: Hose Size: 1" Material: Bronze Box Dimensions: 3"H x 3"W x 4"L WT: 0.77 lbs UPC: 742985064119

Read more less

Swivel Nut Strainer - 1/2" Pipe Inlet - Clear BowlClean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly on the pumphead. Transparent design shows when it is time to clean the bowl. Easy disassembly, cleaning and reassembly.Features: 50-Mesh SS Screen Easy to Install to Pump Head Clear, Clean Plastic Construction Makes it Easy to See When Cleaning is Needed Keeps Debris out of the Pump Easy Disassembly for Cleaning This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PIRANHA™ Livewell 600 Pump - 12 VDC, 600 GPHSmart. Reliable. Attractive. Efficient. All PIRANHA series livewell pumps have a removable cartridge for easy cleaning. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown pump connections. Everything you are looking for in a livewell pump!Features: Removable Cartridge Tough Nylon Housing Washdown Port Built-in Anti-Airlock Ignition Protected ISO 8846 2 Year Warranty CE Listed Tinned 6' Wire Assembly This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Gallons Per Hour: 600 GPH Box Dimensions: 4"H x 7"W x 8"L WT: 1.3 lbs UPC: 752324007011

Read more less

Livewell Fill Valve w/ 3/4" & 1-1/8" FittingsThe fill valve you've been waiting for! The SHURFLO livewell fill valve is the only full port, adjustable, low profile fill valve which creates an energized environment for ultimate bait performance. Made of tough high density nylon, the SHURFLO livewell fill valve is adjustable to reach any desired flow rate.Features: Adjustable Flow Valve 3/4" and 1-1/8" Full Port Fittings Included Low Profile Design Nylon Construction CE Listed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

1" Water Strainer w/Bracket & Fittings - 50 Mesh ScreenSHURFLO's family of Raw Water Strainers are built to keep your bait tank, livewell and washdown pumps protected from harmful debris. The Raw Water Strainer features a clear twist off bowl and removable stainless steel screen, which allows for easy inspection and cleaning. An integral o-ring creates a tight seal, eliminating possible leaks. Keep your pumps and components lasting longer by protecting them with the SHURFLO Raw Water Strainer. 1 Year WarrantyFeatures: 50 Mesh Screen Protects Pumps from Harmful Debris High Capacity Rugged Nylon Housing with Clear Twist Off Polyamide Bowl Easy to Clean Slide Out Screen This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 36" Diameter: 1-3/4" Strokes/Gal: 4 Capacity: 13GPM Hose Length: 36" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 780 GPH Gallons Per Minute: 13 GPM Type: Manual Box Dimensions: 3"H x 4"W x 38"L WT: 1.4 lbs UPC: 021083000121

Read more less