Maxwell RC8-8 Vertical Windlass with Capstan for 8mm, for 5/16" Chain & 5/8" Line 12vModel: RC88CAP12VThe powerful RC8-8 fully automatic rope/chain windlass can be used with 8 mm (5/16") chain spliced to 14 mm three strand or 8-plait rope. The ingenious Wave Design™ rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series. Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations. The RC8 features Maxwell's revolutionary and patented, new Wave Design™ chainwheel. The heavy duty stainless steel (AISI 316) pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel preloaded, the pressure arm always exerts maximum control pressure. The RC8 works just as effectively with all-chain rodes. Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Full disassembly capability of the topworks utilizing only the handle provided and an Allen key. Manual override and 'Free Fall', using the emergency crank/clutch handle provided. Sealed oil bath and marine-grade hard anodised, alloy gearbox provides maximum output via a precision worm and worm wheel. Every Maxwell RC8 automatic rope/chain windlass comes with top works, motor/gear box and dual direction solenoid. Switches and circuit breaker are available and need to be ordered separately. Every Maxwell automatic rope/chain windlass is available with all the necessary components for fully automatic dual direction control in a competitively priced package. This windlass is also available in a version with extra deck clearance. Contact your dealer for more information. Important: Maxwell windlasses must be used in conjunction with a chain stopper and/or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.Specifications Rope/chain Yes Drum Yes Motor (W) 1000 Maximum pull/lift (kg) 600 Chain short link 8mm 5/16" Chain 6-7mm, 1/4" Rope 14-16mm 5/8 Weight (kg) 8 Vertical/Horizontal Vertical Voltage (V) 12vDC What's in the Box: RC8-8 with Capstan 12v Windlass Breaker Reversing Solenoid Up/Down Panel Switch Clutch release handle

Read more less

Maxwell RC8-8 Vertical Windlass for 8mm, for 5/16" Chain & 5/8" Line 12vModel: RC8812VThe powerful RC8-8 fully automatic rope/chain windlass can be used with 8 mm (5/16") chain spliced to 14 mm three strand or 8-plait rope. The ingenious Wave Design™ rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series. Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations. The RC8 features Maxwell's revolutionary and patented, new Wave Design™ chainwheel. The heavy duty stainless steel (AISI 316) pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel preloaded, the pressure arm always exerts maximum control pressure. The RC8 works just as effectively with all-chain rodes. Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Full disassembly capability of the topworks utilizing only the handle provided and an Allen key. Manual override and 'Free Fall', using the emergency crank/clutch handle provided. Sealed oil bath and marine-grade hard anodised, alloy gearbox provides maximum output via a precision worm and worm wheel. Every Maxwell RC8 automatic rope/chain windlass comes with top works, motor/gear box and dual direction solenoid. Switches and circuit breaker are available and need to be ordered separately. Every Maxwell automatic rope/chain windlass is available with all the necessary components for fully automatic dual direction control in a competitively priced package. This windlass is also available in a version with extra deck clearance. Contact your dealer for more information. Important: Maxwell windlasses must be used in conjunction with a chain stopper and/or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.Specifications Rope/chain Yes Drum No Motor (W) 1000 Maximum pull/lift (kg) 600 Chain short link 8mm 5/16" Chain 6-7mm, 1/4" Rope 14-16mm 5/8 Weight (kg) 8 Vertical/Horizontal Vertical Voltage (V) 12vDC What's in the Box: RC8-8 12v Windlass Breaker panel Reversing solenoid Up/Down panel switch Clutch release handle

Read more less

Maxwell RC8-6 Vertical Windlass for 6mm, 1/4" Chain 1/2" Line 12vModel: RC8612VThe combined stainless steel (AISI 316) and chromed bronze RC8-6 fully automatic rope/chain windlass is designed to effortlessly retrieve and deploy 6 mm/7 mm (1/4") chain spliced to 12 mm (1/2") three strand or 8-brait (plait) rope. The ingenious Wave Design™ rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series. Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations. The RC8 features Maxwell's revolutionary and patented, new Wave Design™ chainwheel. The heavy duty stainless steel (AISI 316) pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel preloaded spring, the pressure arm always exerts maximum control pressure. The RC8 works just as effectively with all-chain rodes. Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Full disassembly capability of the topworks utilizing only the handle provided and an Allen key. Manual override and 'Free Fall', using the emergency crank/clutch handle provided. Sealed oil bath and marine-grade hard anodised, alloy gearbox provides maximum output via a precision worm and worm wheel. Every Maxwell RC8 automatic rope/chain windlass comes with top works, motor/gear box and dual direction solenoid. Switches and circuit breaker are available and need to be ordered separately. Every Maxwell automatic rope/chain windlass is available with all the necessary components for fully automatic dual direction control in a competitively priced package. This windlass is also available in a version with extra deck clearance. Contact your dealer for more information. Important: Maxwell windlasses must be used in conjunction with a chain stopper and/or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.Specifications Rope/chain Yes Drum No Motor (W) 600 Maximum pull/lift (kg) 350 Chain short link 6-7mm, 1/4" Chain 6-7mm, 1/4" Rope 12mm, 1/2" Weight (kg) 12.5 Vertical/Horizontal Vertical Voltage (V) 12vDC What's in the Box: RC8-6 12v Windlass Breaker panel Reversing solenoid Up/Down panel switch Clutch release handle

Read more less

Maxwell RC6 12v Vertical WindlassModel: RC612VSuitable for 6 mm/7 mm (1/4") chain and 12 mm (1/2") nylon rope. The combined stainless steel and chromed bronze RC6 automatic rope/chain anchor winch is Maxwell’s smallest version of the vertical RC Series Windlass Range.Specifications Rope/chain Yes Drum No Motor (W) 500 Maximum pull/lift (kg) 350 Chain short link 6-7mm, 1/4" Chain 6-7mm, 1/4" Rope 12mm, 1/2" Weight (kg) 8.5 Vertical/Horizontal Vertical Voltage (V) 12vDC What's in the Box: RC6 12v Windlass Breaker panel reversing solenoid Clutch release handle Up/Down panel switch

Read more less

Maxwell RC108 12V Verticlal Windlass for 5/16" Chain & 5/8" LineModel: RC10812VThe powerful RC8-8 fully automatic rope/chain windlass can be used with 8 mm (5/16") chain spliced to 14 mm three strand or 8-plait rope. The ingenious Wave Design™ rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series. Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations. The RC8 features Maxwell's revolutionary and patented, new Wave Design™ chainwheel. The heavy duty stainless steel (AISI 316) pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel preloaded, the pressure arm always exerts maximum control pressure. The RC8 works just as effectively with all-chain rodes. Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Full disassembly capability of the topworks utilizing only the handle provided and an Allen key. Manual override and 'Free Fall', using the emergency crank/clutch handle provided. Sealed oil bath and marine-grade hard anodised, alloy gearbox provides maximum output via a precision worm and worm wheel. Every Maxwell RC8 automatic rope/chain windlass comes with top works, motor/gear box and dual direction solenoid. Switches and circuit breaker are available and need to be ordered separately. Every Maxwell automatic rope/chain windlass is available with all the necessary components for fully automatic dual direction control in a competitively priced package. This windlass is also available in a version with extra deck clearance. Contact your dealer for more information. Important: Maxwell windlasses must be used in conjunction with a chain stopper and/or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.Specifications Rope/chain Yes Drum No Motor (W) 100 Maximum pull/lift (kg) 700 Chain short link 8mm, 5/16" Chain 8mm, 5/16" Rope 14-16mm 9/16"-5/8" Weight (kg) 19 Vertical/Horizontal Vertical Voltage (V) 12vDC

Read more less

Maxwell RC1010 12V Vertical Windlass with Capstan for 3/8" Chain & 5/8" LineModel: RC1010CAP12VThe powerful combined stainless steel (AISI 316) and chromed bronze RC10-10 fully automatic windlass series is designed to effortlessly retrieve and deploy 10 mm (3/8") chain spliced to 16 mm (5/8") three strand or 8-brait (plait) rope. A sleek, Low Profile version and a fluted stainless steel capstan drum version are available. Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations. Full disassembly capability of the topworks utilising only the handle provided and an Allen key. The RC10 is manufactured from marine-grade 316 stainless steel and chromed bronze for long term durability. The heavy duty stainless steel pressure arm, coupled with the unique rope/chain gypsy, is designed to effectively grasp the splice between rope and chain, giving the RC10 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel preloaded spring, the pressure arm pivots on a trouble free bearing, thereby exerting maximum control pressure on the rode and splice. The RC10 works just as effectively with all chain rodes for those who desire a Low Profile, elegantly styled windlass on their foredeck. Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Sealed oil bath and marine-grade hard anodised, alloy gearbox provides maximum output via a precision worm and worm wheel. Every Maxwell RC10 automatic rope/chain windlass comes with top works, motor/gear box and dual direction solenoid. Switches and circuit breaker are available and need to be ordered separately. Every Maxwell automatic rope/chain windlass is available with all the necessary components for fully automatic dual direction control in a competitively priced package. This windlass is also available in a version with extra deck clearance. Contact your dealer for more information. Important: Maxwell windlasses must be used in conjunction with a chain stopper and/or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.Specifications Rope/chain Yes Drum Yes Motor (W) 1200 Maximum pull/lift (kg) 850 Chain short link 10mm, 3/8" Chain 10mm, 3/8" Rope 16mm, 5/8" Weight (kg) 20 Vertical/Horizontal Vertical Voltage (V) 12vDC What's in the Box: RC10-10 with Capstand 12v Windlass Circuit breaker Reversing solenoid Up/Down panel switch Clutch release handle

Read more less

Maxwell RC1010 12V Vertical Windlass for 3/8" Chain & 5/8" LineModel: RC101012VThe powerful combined stainless steel (AISI 316) and chromed bronze RC10-10 fully automatic windlass series is designed to effortlessly retrieve and deploy 10 mm (3/8") chain spliced to 16 mm (5/8") three strand or 8-brait (plait) rope. A sleek, Low Profile version and a fluted stainless steel capstan drum version are available. Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations. Full disassembly capability of the topworks utilising only the handle provided and an Allen key. The RC10 is manufactured from marine-grade 316 stainless steel and chromed bronze for long term durability. The heavy duty stainless steel pressure arm, coupled with the unique rope/chain gypsy, is designed to effectively grasp the splice between rope and chain, giving the RC10 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel preloaded spring, the pressure arm pivots on a trouble free bearing, thereby exerting maximum control pressure on the rode and splice. The RC10 works just as effectively with all chain rodes for those who desire a Low Profile, elegantly styled windlass on their foredeck. Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Sealed oil bath and marine-grade hard anodised, alloy gearbox provides maximum output via a precision worm and worm wheel. Every Maxwell RC10 automatic rope/chain windlass comes with top works, motor/gear box and dual direction solenoid. Switches and circuit breaker are available and need to be ordered separately. Every Maxwell automatic rope/chain windlass is available with all the necessary components for fully automatic dual direction control in a competitively priced package. This windlass is also available in a version with extra deck clearance. Contact your dealer for more information. Important: Maxwell windlasses must be used in conjunction with a chain stopper and/or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.Specifications Rope/chain Yes Drum No Motor (W) 1200 Maximum pull/lift (kg) 950 Chain short link 10mm, 3/8" Chain 10mm, 3/8" Rope 16mm, 5/8" Weight (kg) 20 Vertical/Horizontal Vertical Voltage (V) 12vDC What's in the Box: RC10-10 12v Windlass Circuit breaker Reversing solenoid Up/Down panel switch Clutch release handle

Read more less

Maxwell HRCFF812V Free Fall Horizontal Windlass, 12v for 5/16" Chain and 9/16" LineModel: HRCFF812V Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection Simple ‘bolt down’ installation ensures effortless and rapid on-deck installation and set up Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation High efficiency spur gearbox incorporating a robust non-backwind mechanism High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch Emergency ‘free fall’ function in the event of onboard power failure. Activated by the supplied, emergency ‘Free Fall’ lever Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation HRC8 is a horizontal version of the latest innovative vertical RC6. It's packed with original features including rode management technology from Maxwell.The sleek, compact HRCFF 8 are Maxwell’s horizontal versions of the latest innovative vertical RC6 and RC8 automatic rope/chain windlasses. The HRCFF Series are packed with original and proven features including patented rode management technology developed by Maxwell. Features and benefits Activate the up control and the ‘free fall’ device automatically disengages allowing you to power up your anchorSpecifications Drum No Motor (W) 600 Maximum pull/lift (kg) 410 Chain short link (mm) 8 Rope 14mm 19/16" Voltage (V) 12vDC Vertical/Horizontal Horizontal What's in the Box: HRCFF8 12v Windlass Circuit Breaker Reversing Solenoid 12v Up/Down Switch Panel Clutch Release Handle

Read more less

Maxwell HRCFF612V Free Fall Horizontal Windlass, 12v for 1/4" Chain and 1/2" LineModel: HRCFF612V Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection Simple ‘bolt down’ installation ensures effortless and rapid on-deck installation and set up Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation High efficiency spur gearbox incorporating a robust non-backwind mechanism High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch Emergency ‘free fall’ function in the event of onboard power failure. Activated by the supplied, emergency ‘Free Fall’ lever Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation HRC6 is a horizontal version of the latest innovative vertical RC6. It's packed with original features including rode management technology from Maxwell.The sleek, compact HRCFF 6 are Maxwell’s horizontal versions of the latest innovative vertical RC6 and RC8 automatic rope/chain windlasses. The HRCFF Series are packed with original and proven features including patented rode management technology developed by Maxwell. Features and benefits Activate the up control and the ‘free fall’ device automatically disengages allowing you to power up your anchorSpecifications Drum No Motor (W) 400 Maximum pull/lift (kg) 270 Chain short link (mm) 6-7 Rope 12mm 1/2" Voltage (V) 12vDC Vertical/Horizontal Horizontal What's in the Box: HRCFF6 12v Windlass Circuit Breaker Reversing Solenoid 12v Up/Down Switch Panel Clutch Release Handle

Read more less

Maxwell HRC10-8 12V Horizontal Windlass for 5/16" Chain an 9/16" LineModel: HRC10812VThe HRC10 Horizontal Series windlasses proudly follow in the highly successful footsteps of Maxwell’s previous, fully automatic rope/chain anchor winches. The all new HRC10 fully automatic horizontal windlass series is designed to effortlessly retrieve and deploy 10 mm (9/16") and 10 mm (3/8") short link chain and 14 mm (9/16") and 16 mm (5/8") three strand or 8-brait (plait) rope.Specifications Drum Yes Motor (W) 1000 Maximum pull/lift (kg) 700 Chain short link (mm) 8mm Rope 14-16mm, 9/16" - 3/8" Voltage (V) 12vDC What's in the Box: HRC10-8 Windlass Circuit Breaker Reversing Solenoid 12v Up/Down Switch Panel Clutch Release Handle

Read more less

Maxwell HRC10-10 12V Horizontal Windlass for 9/16" Chain an 5/8" LineModel: HRC101012VThe HRC10 Horizontal Series windlasses proudly follow in the highly successful footsteps of Maxwell’s previous, fully automatic rope/chain anchor winches. The all new HRC10 fully automatic horizontal windlass series is designed to effortlessly retrieve and deploy 10 mm (9/16") and 10 mm (3/8") short link chain and 14 mm (9/16") and 16 mm (5/8") three strand or 8-brait (plait) rope.Specifications Drum Yes Motor (W) 1000 Maximum pull/lift (kg) 700 Chain short link (mm) 10mm Rope 16mm, 5/8" Voltage (V) 12vDC What's in the Box: HRC10-10 Windlass Circuit Breaker Reversing Solenoid 12v Up/Down Switch Panel Clutch Release Handle

Read more less

Motor 12V 1000W1000 Watt 12 Volt Series Wound Replacement Windlass MotorFeatures: 1000 Watt 12 Volt Replacement Windlass Motor Designed for Maxwell 800 / 1000 windlasses 4 hole flange motor replaces the 1000 Watt 12 volt P11112 2 hole flange motor Maxwell has made a change to the mounting flange of CIMA series-wound motors The change consists of adding a second set of mounting holes which allows the motor to be mounted 90? from the original orientation Replaces Maxwell P11112 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Windlass Foot Switch Replacement Bezel Cover - BlackFeatures: Replacement for Maxwell P19001, P19007 and P19006 Windlass Foot Switches Size (Bezel): 4" diameter, Black Includes Required Fasteners

Read more less

Replacement Pressure Arm f/HRCFF WindlassFeatures: Applications: HRCFF Sold Individually

Read more less

Plunger/Spring Kit - 2200-4500Maxwell Plunger/Spring Kit for VWX - 4 of each

Read more less

Bush 1/2" NylonFeatures: 1/2" Nylon 741 330B

Read more less

Spring-Pressure Arm for RC6, 8 & 10Maxwell Spring-Pressure Arm specifically for RC6, RC8 and RC10.

Read more less

Windlass Clutch Retaining Clip - HalfSpare clutch half retaining clip for Maxwell 3500 VW, VWC and VWCLP windlasses

Read more less

PM Solenoid Pack - 12VMaxwell's PM Solenoid Pack that is 12V.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Reversing Solenoid Pack - 24VMaxwell Reversing Solenoid Pack 24V, replaces P19046.

Read more less

Reversing Solenoid Pack - 12VMaxwell Reversing Solenoid Pack 12V, replaces P19045.

Read more less

Motor Cima - 1200W - 12V - 4-Hole Flange 12V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Motor Cima - 1200W - 24V - 4-Hole Flange 24V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Foot Switch & Cover - Stainless SteelMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws.Features: Rated at 150 amps and suitable for 12V or 24V applications Nickel-plated copper contacts ensure corrosion-free, reliable operation Polished stainless steel bezel and cover

Read more less

Anchor Rode - 18'-5/16" Chain to 200'-5/8" Nylon Brait18' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait ropeNylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength andenergy absorption, and working windlass grip-hold.Applications: Docklines and anchorlinesConstruction: 8-strand NylonSpecific Gravity: 1.14 Specifications: Rope Type: Braided Nylon Rope Length (Feet): 200' Rope Diameter (Inches): 5/8" Chain - Length (Feet): 18' Chain - Diameter (Inches): 5/16" Box Dimensions: 12"H x 12"W x 12"L WT: 39 lbs UPC: 1000000005134 Quick Guide (pdf)Brochure (pdf)

Read more less

Anchor Rode - 15'-5/16" Chain to 150'-5/8" Nylon Brait15' of 5/16" HT spliced chain to 150' of 5/8" Nylon Brait ropeNylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength andenergy absorption, and working windlass grip-hold.Applications: Docklines and anchorlinesConstruction: 8-strand NylonSpecific Gravity: 1.14 Specifications: Rope Type: Braided Nylon Rope Length (Feet): 150' Rope Diameter (Inches): 5/8" Chain - Length (Feet): 15' Chain - Diameter (Inches): 5/16" Box Dimensions: 12"H x 12"W x 12"L WT: 30.5 lbs UPC: 1000000005127 Quick Guide (pdf)Brochure (pdf)

Read more less

Anchor Rode - 20'-5/16" Chain to 200'-5/8" Nylon Brait20' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength andenergy absorption, and working windlass grip-hold.Applications: Docklines and anchorlinesConstruction: 8-strand NylonSpecific Gravity: 1.14 Specifications: Rope Length (Feet): 200' Rope Type: Braided Nylon Rope Diameter (Inches): 5/8" Chain - Length (Feet): 20' Chain - Diameter (Inches): 5/16" Box Dimensions: 12"H x 12"W x 12"L WT: 42.6 lbs UPC: 1000000005110 Quick Guide (pdf)Brochure (pdf)

Read more less

Anchor Rode - 15'-1/4" Chain to 150'-1/2" Nylon Brait15' of 1/4" HT spliced chain to 150' of 1/2" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength andenergy absorption, and working windlass grip-hold.Applications: Docklines and anchorlinesConstruction: 8-strand NylonSpecific Gravity: 1.14 Specifications: Rope Type: Braided Nylon Rope Length (Feet): 150' Rope Diameter (Inches): 1/2" Chain - Length (Feet): 15' Chain - Diameter (Inches): 1/4" Box Dimensions: 10"H x 10"W x 10"L WT: 22 lbs UPC: 1000000005004 Quick Guide (pdf)Brochure (pdf)

Read more less

P10068 Motor - 12VPermanent magnet replacement windlass motorUsed in the Freedom 500, VC500, VW500 and the VWC500 windlassesThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

RC8-6 Vertical Windlass 1/4" Chain, Rope 1/2" 12vPackage Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/down Panel Switch Emergency crank / clutch release handle Features Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations Fully automatic rope / chain windlass is designed to effortlessly retrieve and deploy 1/4" (6mm / 7mm) chain spliced to 1/2" (12 mm) three strand or 8-brait (plait) rope The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series Full disassembly capability of topworks utilising handle provided and an Allen key The RC8 Series is manufactured from marine-grade 316 stainless steel for long term durability The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance In combination with a heavy duty, large wire diameter, stainless steel preloaded spring, the pressure arm always exerts maximum control pressure The RC8 works just as effectively with all-chain rodes for those who desire a Low Profile, elegantly styled windlass on their foredeck Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Full disassembly capability of the topworks utilising only the handle provided and an Allen key Manual override using the emergency crank handle provided Sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and worm wheel All RC Series windlasses are fitted with Maxwell's unique Wave Design™ chainwheel This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode Wave Design™ Chainwheel Is fitted to all RC Series windlasses, designed for anchor rodes with any marine grade chain, G4, BBB, Proof Coil and MetricSpecifications Material: Marine-Grade 316 Stainless Steel Power: 12 Volt DC, 600 Watts Chain / Short Link: 1/4" ( 6mm / 7mm ) Maximum Pull: 770 lbs ( 350kg ) Rope Size: (Nylon)* (3-Strand or 8 Plait Recommended) 1/2" (12mm) Chain Speed (Anchor Retrieval): 92 Feet per Minute (28 m / min) Rope Speed (Anchor Retrieval): 79 Feet per Minute (24 m / min)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 1/4" Freefall: Yes Rope Diameter (Inches): 1/2" Vertical/Horizontal: Vertical Box Dimensions: 11"H x 17"W x 19"L WT: 31.8 lbs UPC: 1000000004847

Read more less

HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with CapstanDesigned for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses proudly follow in the highly successful footsteps of Maxwell's previous, fully automatic rope / chain anchor winches.Kit Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/down Panel Switch Clutch Release Handle Features The HRC10-8 is Maxwell's fully automatic rope/ chain or all chain horizontal windlass Designed to effortlessly retrieve and deploy 8mm (5/16" ) chain and 16mm (5/8" ) three strand or 8-brait (plait) rope. The HRC 10-8 has a patented uniquely designed chain wheel will accommodate ANY 5/16" or 8 mm marine grade chain spliced to 5/8" rope. The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck Case Material: Anodized Aluminum The two part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section. This two piece watertight case allows for quick and easy, on-deck,routine maintenance. Simple " bolt down" installation ensures effortless and rapid on-deck installation and set up. The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain). The new and revolutionary patented Wave Design chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series. The unique Maxwell " wrap around" horizontal chainwheel ensures that more than 90x of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs. High quality Stainless Steel chainwheels The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system. The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope / chain rode into and out of the anchor locker. Cone type clutch/brake mechanism permits manual, "free fall" anchoring and emergency crank recovery of the rode and anchor if required. The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel. Exclusive Maxwell 3 YEAR Limited Warranty Specifications Maximum PUll: 1540 lbs Chain Short Link: 5/16" or 8mm Chain Speed (Anchor Retrieval): 79 ft per Minute Rope Speed (Anchor Retrieval): 65 ft per Minute Rope Size (Nylon 3 strand or 8 Plait): 5/8" Power Supply (DC): 12VDC Motor Power: 1000 Watts Net weight: 42 lbs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 5/16" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Horizontal Box Dimensions: 12"H x 17"W x 19"L WT: 56 lbs UPC: 1000000002683

Read more less

Hinged Bow Roller - Size 2Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain.Size 2: L - 430mm (16-15/16") B - 160mm (5-5/16") H - 100mm (4") h - 190mm (7-1/2") C - 66mm (2-11/16") Quick Guide (pdf)Brochure (pdf)

Read more less

RC12/10 12V WindlassThe RC12 fully automatic windlass series is designed to effortlessly retrieve and deploy 10mm (3/8") short link chain and 16mm (5/8") to 20mm (3/4") three strand or 8-Plait rope (RC12-10) and 12mm/13mm (1/2") short link chain and 20mm (3/4") three strand or 8-Plait rope (RC12-12).With a maximum pull of 1590 kg (3500 lb), and an anchor retrieval rate of 15m/min (50ft/min), the RC12-12 is one of the fastest and gruntiest windlasses in its class.A sleek, Low Profile version and a fluted stainless steel capstan drum version, are available.The RC12 is packed with innovative features combined with Maxwell's traditionally classic aesthetics, but reflecting the modern form follows function of the highly successful RC6, RC8 and RC10 series windlasses.The elegantly designed deckplate and chainpipe cover are manufactured in polished marine-grade 316 stainless steel, as are the heavy duty pressure arm, stripper, chainwheel and fluted capstan drum.The huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.Double cone-type brake/clutch mechanism permits Free Fall anchoring. Cone clutches, unlike dog clutches, provide smooth progressive engagement, ensuring safe and precise operator control.The RC12 features Maxwell's revolutionary and Wave Design™ chainwheel. Emergency manual retrieval is made simple and easy with Maxwell's unique Active Latch Ratchet System operation that prevents backwind of the windlass during manual hauling of the anchor.The Maxwell-designed and innovative black, hard anodized gearbox provides numerous advantages: - Fast and easy windlass installation - More corrosion resistant - Easy to maintain and service - Takes up less room in the anchor locker - 75:1 Ratio (RC12-10) or 100:1 Ratio (RC12-12), single stage design with less moving parts, for smoother and quieter operation - Allows for multi-positioning of the gearbox/motor.Every Maxwell automatic rope/chain windlass comes complete with all the necessary components for fully automatic dual direction control in a competitively priced package.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 3/8" Freefall: Yes Rope Diameter (Inches): 3/4" Vertical/Horizontal: Vertical Box Dimensions: 14"H x 18"W x 25"L WT: 80 lbs UPC: 1000000004397 Brochure (pdf)

Read more less

Up/Down Footswitch - Compact, WhitePart #: P104809Maxwell's compact up and down foot switches are available in black and white versions. Operates via solenoids thus allowing smaller diameter wiring. Quick Guide (pdf)Brochure (pdf)

Read more less

MAXWELL AA710WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTERAll the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash. High level wireless transmission security - 2.4GHz ISM band Hand held controller displays rode count plus signal strength and battery level Console requires two AA batteries Ergonomic shape with wrist strap connector Water resistant to IP65 Rubber moulding for grip and non slip protection Console holder and protective cover Shockproof IEEE 802.15.4 compliant Kit includes 1 hand held remote control and 1 base station, 1 sensor and 1 magnet.Note: Two base stations can be combined and controlled by one remote to allow control of two windlasses. Plus, Plug and Play connectors, T-junctions and Gender Adaptors are also available. Contact your Maxwell Dealer. Quick Guide (pdf)Brochure (pdf)

Read more less

ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell's automatic rope/chain series windlasses. Two sizes (6mm - 8mm/1/4" - 5/16" and 10mm - 12mm/3/8" - 7/16") are available to suit vessels up to 20 metres (65'). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers. Quick Guide (pdf)Brochure (pdf)

Read more less

ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell's automatic rope/chain series windlasses. Two sizes (6mm - 8mm/1/4" - 5/16" and 10mm - 12mm/3/8" - 7/16") are available to suit vessels up to 20 metres (65'). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers. Quick Guide (pdf)Brochure (pdf)

Read more less

HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" RopeMaxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlasses has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system. The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.Features: Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck 2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section 2-piece watertight case allows for quick and easy, on-deck, routine maintenance Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain) Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs Works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 3/8" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Horizontal Box Dimensions: 11"H x 17"W x 20"L WT: 55 lbs UPC: 1000000002638 Brochure (pdf)

Read more less