Minn Kota Raptor Direct Mount Angle Bracket - WhiteModel: 1810376 Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Maximizes holding power in direct transom mounting applications by providing the optimal angle for Raptor deployment.What's in the Box: Direct Mount Bracket - White Mounting hardware

Read more less

Minn Kota Raptor Direct Mount Angle Bracket - BlackModel: 1810371 Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Maximizes holding power in direct transom mounting applications by providing the optimal angle for Raptor deployment.What's in the Box: Direct Mount Bracket - Black Mounting hardware

Read more less

Minn Kota MKA-23 Quick Release BracketModel: 1854023 Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with padlock (not included) for additional security Compatible with Ultrex, Fortrex, Maxxum, and Edge. Easily remove your cable-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).Compatible with Ultrex, Fortrex, Maxxum, and Edge.NOTE: Not for use with 72" shaft length motors.

Read more less

3" Raptor Setback Bracket - WhiteProvides 3” of additional setback to all mounting applications where specific clearances are required for Raptor Shallow Water Anchors.Features: Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware 5-year warranty Brochure (pdf)

Read more less

Minn Kota Raptor 3" Setback Bracket - WhiteModel: 1810375 Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware 5-year warranty Provides 3" of additional setback to all mounting applications where specific clearances are required for Raptor Shallow Water AnchorsWhat's in the Box: 3" Setback bracket - White Mounting Hardware

Read more less

Minn Kota Raptor 3" Setback Bracket - BlackModel: 1810370 Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware 5-year warranty Provides 3" of additional setback to all mounting applications where specific clearances are required for Raptor Shallow Water AnchorsWhat's in the Box: 3" Setback bracket - Black Mounting Hardware

Read more less

Minn Kota Quick Release Disconnect for TalonModel: 1810244?Quick Release Power Disconnect Plug for Talon Shallow Water Anchors. This heavy-duty, waterproof connector features an all-inclusive screw-lock design.

Read more less

MKR-30 Remote Power SwitchAllows for power on/off functionality of Minn Kota Quest series RT Instinct, Ulterra, RT Terrova and Terrova trolling motors via remote mounted rocker switch.Features: Allows for power on/off functionality of select motors via remote mounted rocker switch Interchangeable white and black switch covers included for all mounting applications Dimmable LED backlight indicates switch position Can be used with or without optional wired foot pedal accessory via y-cable connection 30 ft. lead length Compatible with QUEST series Ulterra, Terrova, Riptide Terrova, and Riptide Instinct motors Specifications:Warranty: One-Year Warranty Quick Guide (pdf)

Read more less

Minn Kota RTA-17 Quaick Release BracketModel: 1854017 Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with 1/4", short shank padlock (not included) for additional security Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP Designed for use in saltwater One-Year Warranty Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72" or longer. Instead use the RTA-54 model.

Read more less

Minn Kota MKR-30 Remote Power SwitchModel: 1865130 Allows for power on/off functionality of select motors via remote mounted rocker switch Interchangeable white and black switch covers included for all mounting applications Dimmable LED backlight indicates switch position Can be used with or without optional wired foot pedal accessory via y-cable connection 30' lead length Compatible with QUEST series Ulterra, Terrova, Riptide Terrova and Riptide Instinct motors Allows for power on/off functionality of Minn Kota Quest series RT Instinct, Ulterra, RT Terrova and Terrova trolling motors via remote mounted rocker switch.

Read more less

MKA-21 Composite Quick Release BracketEasily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors. Features Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the MKA-53 model. Designed for use in freshwater WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

RTA-17 Composite Quick Release BracketEasily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors. Features: Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with padlock (not included) for additional security Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the RTA-54 model.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Minn Kota RTA-17 Quaick Release BracketModel: 1854012 Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with 1/4", short shank padlock (not included) for additional security Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP Designed for use in saltwater Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72" or longer. Instead use the RTA-54 model.

Read more less

Ultrex Lift Assist Cylinder for 80LB Motors with 45” Shaft LengthThese replacement lift assist cylinders for Ultrex trolling motors work by increasing the effective weight of the overall lift assist system to account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors.Features: Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ and Humminbird® MEGA 360 Imaging™ reduces the effort required for motor stow and deploy replaces the factory standard lift assist cylinder Designed for 24V, 80lb Ultrex™ motors with a shaft length of 45"

Read more less

Minn Kpta MLA-21 Quick Release Bracket Model: 1854021 Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately). NOTE: Not for use with 72" shaft length motors. Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40.

Read more less

Minn Kota Ultrex Lift Assist Cylinder for 115lb 45"Model: 1854073 Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ as well as Humminbird® MEGA 360 Imaging™ Reduces effort required for motor stow and deploy Replaces factory standard lift assist cylinder Designed for Ultrex™QUEST™ series motors with a shaft length of 45" One-Year Warranty These replacement lift assist cylinders for Ultrex trolling motors work by increasing the effective weight of the overall lift assist system to account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors.

Read more less

Minn Kota Ultrex Lift Assist Cylinder 112/45"Model: 1854072 Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ as well as Humminbird® MEGA 360 Imaging™ Reduces effort required for motor stow and deploy Replaces factory standard lift assist cylinder Designed for 36V, 112lb Ultrex™ motors with a shaft length of 45" One-Year Warranty These replacement lift assist cylinders for Ultrex trolling motors work by increasing the effective weight of the overall lift assist system to account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors.

Read more less

Minn Kota Ultrex Lift Assist Cylinder 80/45"Model: 1854070 Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ as well as Humminbird® MEGA 360 Imaging™ Reduces effort required for motor stow and deploy Replaces factory standard lift assist cylinder Designed for 24V, 80lb Ultrex™ motors with a shaft length of 45" One-Year Warranty These replacement lift assist cylinders for Ultrex trolling motors work by increasing the effective weight of the overall lift assist system to account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors.

Read more less

Deckhand 40 Remote Switch25' cord allows you to operate the DeckHand 40 from anywhere on the boatWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

MKA-60 Stabilizer KitReduces bounce on bow-mount trolling motors. Equipped with a low profile mounting base that allows the stabilizer to be easily removed. The pivoting arm can be folded down when not in use.Features: Reduces motor bounce in the stowed position Absorb vibrations to protect the motor shaft Folds down when not in use Multiple mounting orientations to fit your boat configuration Easily removable, it leaves only a low-profile base Stabilizer shafts can be cut to fit Multi-position strap adjusts to accommodate all shaft sizes Includes Stainless steel mounting hardware Compatible with the QUEST series RT Instinct, Ulterra, RT Terrova, Terrova, and Ulterra, Riptide Ulterra, Terrova, Riptide Terrova, Riptide ST, PowerDrive, Riptide PowerDrive, PowerDrive V2, Riptide SP, and PowerDrive Pontoon

Read more less

MKA-16-03 Quick Release BracketFor quick, easy removal of your electric-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system.Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40.- Allows trolling motor to be quickly removed from and reattached to boat deck- Sidescrew design attaches trolling motor to top bracket and slides into - deck-mounted bottom bracket, secured with tightening screw- Solid, anodized aluminum construction- Includes stainless steel mounting hardware- Brackets can be secured with padlock (not included) for additional securityWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Talon 6" Setback Bracket Riser Just like Talon locks you to your spot in the water, Minn Kota's mounting and adapter brackets keep Talon locked on your boat in any condition. Unparalleled strength combined with an innovative modular design, so it's easy to select the right mount and get Talon rigged up on any boat. Features: Provides 6" of additional setback For direct transom mount application only Provides precise boat positioning Quickly and quietly stops boat Easy to install

Read more less

Minn Kota MKA-60 Stabilizer KitModel: 1862060 Reduces motor bounce in the stowed position Absorb vibrations to protect motor shaft Folds down when not in use Multiple mounting orientations to fit your boat configuration Easily removeable, leaves only a low profile base Stabilizer shaft can be cut to fit Multi-position strap adjusts to accommodate all shaft sizes Includes Stainless steel mounting hardware Compatible with QUEST series RT Instinct, Ulterra, RT Terrova, Terrova and Ulterra, Riptide Ulterra, Terrova, Riptide Terrova, Riptide ST, PowerDrive, Riptide PowerDrive, PowerDrive V2, Riptide SP, and PowerDrive Pontoon Reduces bounce on bow-mount trolling motors. Equipped with a low profile mounting base that allows stabilizer to be easily removed. Pivoting arm can be folded down when not in use.

Read more less

Minn Kota Talon Setback Bracket - 6"Model: 1810220Provides 6" of additional setback for direct transom mount application only. Mounting hardware included.

Read more less

Minn Kota MKR-US2-13 Humminbird Onix Adapter cable Model: 1852073 Universal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. Adapter connects your Humminbird ONIX fishfinder with a Universal Sonar 2 transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference. *200 kHz/83 kHz compatible and only provides traditional 2D sonar HUMMINBIRD SOLIX™ SERIES MODEL US2 CABLE SOLIX 15 SI MKR-US2 13 SOLIX 15 MKR-US2 13 SOLIX 12 SI MKR-US2 13 SOLIX 12 MKR-US2 13 HUMMINBIRD HELIX™ SERIES MODEL US2 CABLE HELIX 12 CHIRP MEGA SI GPS G2N MKR-US2 8 HELIX 12 CHIRP GPS G2N MKR-US2 8 HELIX 12 SI CHIRP GPS KVD MKR-US2 8 HELIX 12 SI CHIRP GPS MKR-US2 8 HELIX 12 CHIRP MKR-US2 8 HELIX 10 CHIRP MEGA SI GPS G2N MKR-US2 8 HELIX 10 CHIRP GPS G2N MKR-US2 8 HELIX 10 SI GPS KVD MKR-US2 8 HELIX 10 SI GPS MKR-US2 8 HELIX 10 SONAR GPS MKR-US2 8 HELIX 9 CHIRP MEGA SI GPS G2N MKR-US2 8 HELIX 9 CHIRP GPS G2N MKR-US2 8 HELIX 9 SI GPS KVD MKR-US2 8 HELIX 9 SI GPS MKR-US2 8 HELIX 9 SONAR GPS MKR-US2 8 HELIX 7 CHIRP SI GPS G2N MKR-US2 8 HELIX 7 CHIRP SI GPS G2 MKR-US2 8 HELIX 7 CHIRP GPS G2N MKR-US2 8 HELIX 7 CHIRP GPS G2 MKR-US2 8 HELIX 7 SONAR G2 MKR-US2 8 HELIX 7 SI GPS KVD MKR-US2 8 HELIX 7 SI GPS MKR-US2 8 HELIX 7 SONAR GPS MKR-US2 8 HELIX 7 SONAR MKR-US2 8 HELIX 5 CHIRP SI GPS G2 MKR-US2 8 HELIX 5 CHIRP GPS G2 MKR-US2 8 HELIX 5 SONAR G2 MKR-US2 8 HELIX 5 SI GPS KVD MKR-US2 8 HELIX 5 SI GPS MKR-US2 8 HELIX 5 SONAR GPS MKR-US2 8 HELIX 5 SONAR MKR-US2 8 HUMMINBIRD ONIX® SERIES MODEL US2 CABLE ONIX 10 ci SI NT combo MKR-US2 13 ONIX 10 ci NT combo MKR-US2 13 ONIX 10 ci SI Combo MKR-US2 13 ONIX 10ci Combo MKR-US2 13 ONIX 8 ci SI NT combo MKR-US2 13 ONIX 8 ci NT combo MKR-US2 13 ONIX 8 ci SI Combo MKR-US2 13 ONIX 8ci Combo MKR-US2 13 HUMMINBIRD 1100 SERIES MODEL US2 CABLE 1199ci HD SI Combo MKR-US2 8 1198c SI Combo MKR-US2 8 1159ci HD Combo MKR-US2 8 1158c Combo MKR-US2 8 HUMMINBIRD 900 SERIES MODEL US2 CABLE 999ci HD SI Combo KVD MKR-US2 8 999ci HD SI Combo MKR-US2 8 998c HD SI Combo MKR-US2 8 998c SI Combo MKR-US2 8 959ci HD Combo MKR-US2 8 958c HD Combo MKR-US2 8 958c Combo MKR-US2 8 HUMMINBIRD 800 SERIES MODEL US2 CABLE 899 ci HD SI Combo MKR-US2 8 898c HD SI Combo MKR-US2 8 898c SI Combo MKR-US2 8 859ci HD Combo MKR-US2 8 858c HD Combo MKR-US2 8 858c Combo MKR-US2 8 HUMMINBIRD 700 SERIES MODEL US2 CABLE 788ci HD Combo MKR-US2 8 778c HD MKR-US2 8 718 MKR-US2 8 HUMMINBIRD 600 SERIES MODEL US2 CABLE 688 ci HD Combo MKR-US2 8 678c HD Combo MKR-US2 8 678c HD MKR-US2 8 HUMMINBIRD 500 SERIES MODEL US2 CABLE 597ci HD Combo MKR-US2 8 597ci Combo MKR-US2 8 596c HD Combo MKR-US2 8 587ci HD MKR-US2 8 586c HD MKR-US2 8 581i Combo MKR-US2 8 570 MKR-US2 8 561 MKR-US2 8 560 MKR-US2 8 HUMMINBIRD 300 SERIES MODEL US2 CABLE 386ci Combo MKR-US2 8 385ci Combo MKR-US2 8 365i Combo MKR-US2 8 345c MKR-US2 8 325 MKR-US2 8 HUMMINBIRD PiranhaMAX™ SERIES MODEL US2 CABLE PiranhaMAX 155 MKR-US2 8 NOTE: Minn Kota motors with built-in Universal Sonar 2 (including those with i-Pilot Link) are not compatible with Humminbird's Down Imaging Sonar. An external XTM 9 WIDE DI 20 T (83/200) or XTM 9 DI 25T (200/455) is required for all sonar readings with all HELIX 12 , HELIX 10, HELIX 9, 1100, 900, and 800 Humminbird Down Imaging units. An external XTM 9 DI 25T transducer would be required for the Down Imaging versions of the HELIX 7 and HELIX 5 along with the 788ci HD DI.

Read more less

Minn Kota MKA-49 Replacement Cable and HandleModel: 1854125For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design with an ultra-strong, abrasion-resistant, coated stainless steel braided cable.Compatible with most Minn Kota cable steer, bow-mount motors including Ultrex, Fortrex, Maxxum, Edge, Riptide SF, Riptide SM and Riptide SE

Read more less

Minn Kota MKA-50Stabilizer Kit For Ultrex / FortrexModel: 1862050 Attaches to the left or right side of bowguard Pivots into vertical position and rests on the boat deck when motor is stowed Rotates in the horizontal position with bowguard when the motor is deployed Includes rubber bumper to protect deck finish Stainless steel hardware tested for saltwater use Fits any Ultrex, Fortrex or Riptide Fortrex (SF) bow-mount trolling motor Reduces motor bouncing when in stowed position.Specifications Model Stabilizer Kit - Ultrex / Fortrex MKA-50 Warranty One-Year Warranty

Read more less

MKA-50 Bow-Mount Stabilizer Kit for FortrexFeatures: Reduces motor bouncing when in stowed position Attaches to the left or right side of bowguard Pivots into vertical position and rests on the boat deck when motor is stowed Rotates in the horizontal position with bowguard when the motor is deployed Includes rubber bumper to protect deck finish Stainless steel hardware tested for saltwater use Fits any Fortrex or Riptide SF bow-mount trolling motor WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

A durably constructed Minn Kota Drift Sock slows down your drift to enable proper bait presentation over holding fish. 34" deep x 22" diameter Features 420 denier ripstop nylon with 4 heavy-duty 1" nylon straps Weights at the bottom and floats at the top are sewn into the edge of the opening to allow the sock to open instantly when thrown into the waterWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Minn Kota MKA-44 Telescopic Extension Handle 24" to 40"Model: 185410817" to 25" adjustable extensionSimply twist the handle to loosen, adjust and tighten our extension handles. Go from 24" to 40" and experience total speed and steering control in any situation. Fits all outboard and trolling motors

Read more less

Minn Kota MKA-27 Drift Sock ProModel: 1865261 Durable constructed Minn Kota Drift Sock slows down your drift to enable proper bait presentation over holding fish. Weights at the bottom and floats at the top, to allow the sock to open instantly when thrown into the water. Features 420 denier ripstop nylon. 34" deep x 22" diameter. 4 heavy-duty 1" nylon straps. One-Year Warranty A durable constructed Minn Kota Drift Sock slows down your drift to enable proper bait presentation over holding fish. 34" deep x 22" diameter. Features 420 denier ripstop nylon. 4 heavy-duty 1" nylon straps. Weights at the bottom and floats at the top, to allow the sock to open instantly when thrown into the water.

Read more less

MKA-27 60AMP Circuit BreakerFeatures: 60AMP Circuit Breaker Waterproof Ignition Protected

Read more less

These ergonomic handles fit all outboard and trolling motors. Simply twist the handle to loosen, adjust and tighten, then you?re ready to fish comfortably in any situation.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Minn Kota MKP-37 Prop Weedless WedgeModel: 1865039 Weedless Prop made exclusively for QUEST Series motors is designed to power through heavy vegetation and prevent weeds from wrapping around prop and lower unit, even at slower speeds. Helps you move through heavy weeds and vegetation — even at slow speeds while conserving battery power Fits 4-1/2" QUEST Series Lower Units For Use With 1" x 3/16" Prop/Drive Pin Prop Nut Thread 3/8"-24 One-Year Warranty This 100% weedless prop helps you move through heavy vegetation — even at slow speeds all the while conserving battery power. Designed to work exclusively with QUEST Series motors. Includes prop pin, nut and washer.What's in the Box: Minn Kota MKP-37 Prop Weedless Wedge Prop Nut, Washer and Pin

Read more less