RMX4400 RailMount UncutPart #: RMX4400NavPod Protects Your Electronics From Harsh ConditionsNavPod's mirror polished 316 Stainless Steel RailMount is supplies with adapter bushings to accommodate 1" or 1.25" Pedestal Guards.The RMX4400 RailMount is uncut with a usable face of 8.75"W x 6"H. The RMX4400 has 1" or 1.25" tubing.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Uncut Mounting Style: Rail Usable Face: 8.75"W x 6"H Box Dimensions: 6"H x 11"W x 15"L WT: 5.4 lbs UPC: 659988106503

Read more less

PED5100-01 PedestalPod Pre-Cut for Humminbird HELIX 10 & HELIX 9 Series - Carbon BlackPedestalPods are better than bracket mounting. Very sturdy and secure yet clean and attractive, this mount protects your fishfinder/chartplotter from the harshest wet boating conditions. PedestalPods also allow you to easily reach and control the fishfinder/chartplotter while providing added security and protection from theft.PedestalPods position your fishfinder/chartplotter at 20" off the deck, located near the bow, and at a 45° angle for easy viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom, or even control the trolling motor.PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets.NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft.There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Deck Box Dimensions: 10"H x 17"W x 28"L WT: 8 lbs UPC: 659988113372

Read more less

NavPod SPS3000 StarPod 3 System for Starlink Gen3 Standard Dish (23.04 x 15.07? dish size)Model: SPS3000The StarPod 3 System is a waterproof, secure, attractive mounting solution for your Starlink Gen3 Standard antenna. The housing features a built-in 10-degree angle and full swivel adjustability so that the dish can be manually adjusted for an optimized view of Starlink satellites in the sky. The 10-degree angle also prevents water from pooling on top of the housing, which can cause signal interference.***NOTE*** Assembly of this product requires the use of a deck fill wrench (Groco model SW-2531 or equivalent product). This tool is NOT included with the StarPod.Third-Party Accessory Disclaimer: The NavPod and StarPod brands are in no way affiliated with the Starlink or SpaceX brands. Their products are third-party accessories, distinct from the brands and products they are designed to house.Liability Disclaimer: NavPod assumes no liability for any violation of Starlink product warranty or terms of service that may result from modifying a Starlink dish or mounting it inside a StarPod

Read more less

NavPod SPS2000 StarPod 2 System for Starlink Actuated (Starlink Gen2 Actuated dish; 20.2 x 11.9? dish size)Model: SPS2000The StarPod 2 System is a waterproof, secure, attractive mounting solution for your Starlink Gen2 Actuated antenna. The housing features a built-in 10-degree angle and full swivel adjustability so that the dish can be manually adjusted for an optimized view of Starlink satellites in the sky. The 10-degree angle also prevents water from pooling on top of the housing, which can cause signal interference.***NOTE*** Assembly of this product requires the use of a deck fill wrench (Groco model SW-2531 or equivalent product). This tool is NOT included with the StarPod.Third-Party Accessory Disclaimer: The NavPod and StarPod brands are in no way affiliated with the Starlink or SpaceX brands. Their products are third-party accessories, distinct from the brands and products they are designed to house.Liability Disclaimer: NavPod assumes no liability for any violation of Starlink product warranty or terms of service that may result from modifying a Starlink dish or mounting it inside a StarPod

Read more less

Navpod PP4900-01 PowerPodModel: PP4900-01PowerPod Pre-Cut for Raymarine eS95/eS97/eS98 & AXIOM PRO 9PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8 opening (1.1 on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7?, 9?, 12? and 16? LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods Protection, Convenience, Security.Specifications Overall Height in 11.63 cm 29.5 Width in 14.25 cm 36.2 Depth in 7.37 cm 18.7 Usable Face Height in 7.39 cm 18.8 Width in 12.36 cm 31.4 Depth in 5.29 cm 13.4 Max Cutout Height in 8.09 cm 20.5 Width in 13.26 cm 33.7 Base Footprint Height in 2.26 cm 5.7 Width in 7.03 cm 18 View Angle 20

Read more less

SailPod Uncut Usable Face 15.18″w x 9.85″h (38.6cm w x 25cm h) for Garmin GPSMAP® 1223/1243xsv - 9.5″ Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your fingertips… “Where you need it when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

SailPod Pre-Cut for Simrad NSS12 evo³ & B&G Zeus³ 12 for 9.5" Wide GuardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it”. Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to QualityWe stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Pedestal Box Dimensions: 8"H x 11"W x 17"L WT: 5.8 lbs UPC: 659988113785

Read more less

AG218 12" Wide AngleGuard - Single Bend - 1.25" DiameterPart #: AG218NavPod Protects Your Electronics In Harsh ConditionsInstrumentPods and SailPods can be mounted together on a single bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.Sailpod sold separately Features: 1.25" Diameter Single Bend 12" Angled Flat Length 1.25" Tubing Diameter 12" Center to Center All 1.25” include stainless steel feet (1” does not include feet) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PART #: TP125 Description: Top Plate Adaptor for 1.25" AngleGuard on Edson Steering System W x H x D: 9.5" x 9.5" x 1.25" NavPod Protects Your Electronics In Harsh ConditionsTop Place AdaptorNavPod AngleGuards are designed to upgrade sailboat steering systems to accommodate mounting of electronics onto NavPods.Edson is a popular manufacturer of steering systems who has always used a 9.5" wide pedestal guard. Most of their pedestal guards are 1" in diameter. Lewmar (formally Whitlock) also has manufactured steering systems that use the 9.5" wide format. NavPod supplies the SG10 and AG10 as a easy retrofit onto either of these systems.Because of the clean and secure method of concealing wires and the need to accommodate large connectors and heavy radar cables within the Stainless Steel tubes, NavPod recommends the larger 1.25" diameter AngleGuards. Often the existing Top Plate needs to be bored out or replaced with the TP125 to accommodate the larger diameter. NavPod supplies Polished Stainless Steel feet with all 1.25" AngleGuards.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PowerPod Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods: Protection, Convenience, Security.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: Dash Cut/Uncut: Cut Box Dimensions: 9"H x 15"W x 17"L WT: 6.5 lbs UPC: 659988114294

Read more less

PowerPod Pre-Cut for Simrad NSS12 evo³ & B&G Zeus³ 12PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods – Protection, Convenience, Security.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Dash Box Dimensions: 9"H x 15"W x 17"L WT: 7.85 lbs UPC: 659988114331

Read more less

AG27 9.5" Wide AngleGuard - Double Bend - 1" DiameterPart #: AG27NavPod Protects Your Electronics In Harsh ConditionsInstrumentPods and SailPods can be mounted together on a double bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.Sailpod sold separately Features: 9.5" Center to Center 1" Diameter Double Bend 10" Angled Flat Length 8" Upper Vertical Flat Length This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less