NAVGP250004 SystemPodModel: GP2500-04SystemPod Pre-Cut for Humminbird HELIX 7 Series 7 and space/for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.SpecificationsHeight7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

Read more less

NAVPOD RMX4600-06 RailmountModel: RMX4600-06RailMount Pre-Cut for Simrad NSS9 evo3 / B&G Zeus3 9RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1 in or 1.25 in diameter tube. A Nickel Chrome-Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch chartplotters.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!

Read more less

NAVPOD RMX4600-04 RailmountModel: RMX4600-04 Full Image RailMount Pre-Cut for Simrad NSS9 evo2/B&G Zeus2 9RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1 in or 1.25 in diameter tube. A Nickel Chrome-Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch chartplotters.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!

Read more less

NAVPOD PP5200-13 PowerPodModel: PP5200-13PowerPod Pre-Cut for Garmin GPSMAP 1242xsv/1222xsv/1222PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8 in€ opening (1.1 in on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7 in, 9 in, 12"and 16 in LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods â€" Protection, Convenience, Security.SpecificationsHeight14.53 Width 16.5 Depth 8.5 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25 Base Size PB8OR Height Gen 3 round Width 8.125 Face Tilt Angle Height 20

Read more less

Navpod PP5200-12 PowerPodModel: PP5200-12Pre-Cut for Garmin 7407/7407xsv/7607/7607xsv/720/721/740/740s/741/721xs/741xs/70s/70dv and space on left (GP1501 SystemPod for 9.5 wide guard)PP5200 Series

Read more less

NAVPOD PP5200-02 PowerPodModel: PP5200-02PowerPod Pre-Cut for Humminbird SOLIX 12PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8" opening (1.1" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7?, 9?, 12?and 16? LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods â€" Protection, Convenience, Security.SpecificationsHeight14.53 Width 16.5 Depth 8.5 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25 Base Size PB8OR Height Gen 3 round Width 8.125 Face Tilt Angle Height 20

Read more less

NAVPOD PP480010 PowerPodModel: PP4800-10PowerPod Pre-Cut for Garmin GPSMAP 8410xsv/8610xsvPowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8" opening (1.1" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7?, 9?, 12?and 16? LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods â€" Protection, Convenience, Security.1Specificationsin13.11 cm 33.3 Width in 13.25 cm 33.7 Depth in 8.75 cm 22.2 Usable Face Height in 8 cm 20.3 Width in 11.125 cm 28.3 Depth in 4.375 cm 11.11 Max Cutout Height in 7.5 cm 19.1 Width in 10.625 cm 27.0 Base Footprint Height in 3.25 cm 8.3 Width in 8.27 cm 21.0

Read more less

NAVPOD PP4800-07 PowerPodModel: PP4800-07PowerPod Pre-Cut for Raymarine AXIOM 9 (Pre-Cut is for Surface Mount using rear mounting brackets, Requires Raymarine Right Angle Connector)PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1? for PP4100, PP4400, PP4500, PP4600 Series; 1.8? for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7?, 9?, 12? and 16? displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.Specificationsin13.11 cm 33.3 Width in 13.25 cm 33.7 Depth in 8.75 cm 22.2 Usable Face Height in 8 cm 20.3 Width in 11.125 cm 28.3 Depth in 4.375 cm 11 Max Cutout in 7.75 cm 19.1 With in 10.625 cm 27.0 Base Footprint Height in 3.25 cm 8.3 Width in 8.27 cm 21.0

Read more less

NAVPOD PP4400-10 PowerPodModel: PP4400-10PowerPod Pre-Cut for Lowrance HOOK-7 / HOOK-7x Fishfinder/ChartplotterPowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8" opening (1.1" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7?, 9?, 12?and 16? LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods â€" Protection, Convenience, Security.SpecificationsHeight9.75 Width 10.65 Depth 6.39 Usable Face Height 6 Width 8.75 Depth 4.39 Max Cutout Height 8.5 Width 5.75 Depth 4 Base Foothprint Width 5.37

Read more less

NAVPOD PP440-09 PowderPodModel: PP4400-09PowerPod Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1? for PP4100, PP4400, PP4500, PP4600 Series; 1.8? for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7?, 9?, 12? and 16? displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.SpecificationsHeight9.75 Width 10.65 Depth 6.39 Usable Face Height 6 Width 8.75 Depth 4.39 Max Cutout Width 5.37

Read more less

NAVGP260009 SystemPodModel: GP2600-09SystemPod Pre-Cut for Raymarine a65/a67/a68 and 2 inst. (3.6? holes) for 12 in wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.SpecificationsHeight7.75 Width 21.5 Depth 4.46 Usable Face Height 6 Width 19.75 Depth 3.5 Max Cutout Height 5.45 Width 19.25

Read more less

NAVGP260004 SystemPodModel: GP2600-04SystemPod Pre-Cut for Raymarine eS75/eS77/eS78 and 2 inst. (3.6? holes) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.SpecificationsHeight7.75 Width 21.5 Depth 4.46 Usable Face Height 6 Width 19.75 Depth 3.5 Max Cutout Height 5.45 Width 19.25

Read more less

NAVGP2400 InstrumentPodModel: GP2400InstrumentPod Un-Cut (usable face = 19.5"w x 5"h)(49.5cm W x 11.4cm H) for 12 in wide guardThe GP2400 InstumentPod comes Un-Cut and is for mounting to a 12 in wide guard. Information at your finger tips. An InstrumentPod is best mounted on a StraightGuard or on the upper portion of a Double Bend AngleGuard with a SailPod mounted below. Usable face = 20.375"w x 5"h (58.7cm W x 11.4cm H)SpecificationsHeight6.5 Width 21.875 Depth 4.33 Usable Face Height 5 Width 19.5 Depth 3.125 Max Cutout Height 4.125 Width 19.3

Read more less

NAVGP2500 SystemPodModel: GP2500SystemPod Un-Cut (usable face = 15.0"w x 6.0"h)(38.1cm w x 15.2cm h) for 12 in wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it, when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.SpecificationsHeight7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

Read more less

NAVGP2401 InstrumentPodModel: GP2401InstrumentPod Pre-Cut for four instruments (3.6 in holes) for 12 in wide guardThe GP2401 InstumentPod comes Pre-Cut for mounting four Instruments on a 12 in wide guard. The Pre-cut hole is 3.6 in in diameter found on popular 110mm instruments. An InstrumentPod is best mounted on a StraightGuard or on the upper portion of a Double Bend AngleGuard with a SailPod mounted below.SpecificationsHeight6.5 Width 21.875 Depth 4.33 Usable Face Height 5 Width 19.5 Depth 3.125 Max Cutout Height 4.125 Width 19.3

Read more less

NAVPOD RMX4600 RailmountModel: RMX4600RailMount Un-Cut (usable face = 11.125"w x 6.5"h)(28.2cm w x 16.5cm h)RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1 in or 1.25 in diameter tube. A Nickel Chrome-Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch chartplotters.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!1

Read more less

NAVPOD RMX4500-09 RailmountModel: RMX4500-09RailMount Pre-Cut for Simrad NSS7 evo3 / B&G Zeus3 7RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1 in or 1.25 in diameter tube. A Nickel Chrome-Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch chartplotters.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!SpecificationsHeight7.69 Width 11.86 Depth 5.5 Overall Size Assembly Height 10.5 Width 13.91 Depth 6.3 Usable Face Height 6 Width 9.95 Depth 4.125 Max Cutout Height 5.5 Width 9.5

Read more less

NAVPOD PP5200-01 PowerPodModel: PP5200-01PowerPod Pre-Cut for Humminbird HELIX 12PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8 in€ opening (1.1" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7 in, 9 in, 12"and 16 in LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods â€" Protection, Convenience, Security.SpecificationsHeight14.53 Width 16.5 Depth 8.5 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25 Base Size PB8OR Height Gen 3 round Width 8.125 Face Tilt Angle Height 20

Read more less

NAVPOD PP5100-01 PowerPodModel: PP5100-01PowerPod Pre-Cut for Humminbird HELIX 10 & HELIX 9 SeriesPowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8 in€opening (1.1 in on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7 in, 9 in, 12"and 16 in LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods â€" Protection, Convenience, Security.

Read more less

NavPod PP4800 PowerPod Un-Cut (footprint 6.5"x 6.5 in) PP4800 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. H W D Overall Size 12 in 13.25 in 8.5 in Usable Face 8.375 in 10.5 in 5 in Max Cutout 7.125 in 10.25 in All PowerPods include: ?Acrylic capped ABS plastic Chromed Stainless Steel tamper-proof fasteners Double seal for watertight integrity Swivel Base with large pass-through for wire harness Models are available Pre-Cut for popular electronics

Read more less

NAVPOD PP460015 PowerPodModel: PP4600-15PowerPod Pre-Cut for Lowrance Elite-9 Ti / Ti2 Fishfinder/ChartplotterPowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8" opening (1.1" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7?, 9?, 12?and 16? LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods â€" Protection, Convenience, Security.

Read more less

NAVPOD PP460014 PowerPodModel: PP4600-14PowerPod Pre-Cut for Lowrance HDS-9 LIVEPowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8" opening (1.1" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7?, 9?, 12?and 16? LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods â€" Protection, Convenience, Security.

Read more less

Navpod PP4400 PowerPod Uncut PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. H W D Overall Size 9 in 10.2 in 6 in Usable Face 5.6 in 8.9 in 8 in Max Cutout 4.625 in 8 in All PowerPods include: Acrylic capped ABS plastic Chromed Stainless Steel tamper-proof fasteners Double seal for watertight integrity Swivel Base with large pass-through for wire harness Models are available Pre-Cut for popular electronics

Read more less

NAVPOD PP4102 PowderPodModel: PP4102PowerPod Pre-Cut for one Simrad IS42 / B&G Triton2/AP44 square hole instrumentPowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1 in for PP4100, PP4400, PP4500, PP4600 Series; 1.8 in for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7 in, 9 in, 12 in and 16 in displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods â€" Protection, Convenience, Security.SpecificationsHeight7.06 Width 6.00 Depth 4.72 Usable Face Height 4.5 Width 4.5 Depth 3.5 Max Cutout Height 4 Width 4 Depth 3.25 Base Footprint Width 4.58

Read more less

NavPod PP4101 PowerPod Pre-Cut for Raymarine, P70, P70R, & ST60 PP4100 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. H W D Overall Size 7.375 in 5.9 in 5.375 in Usable Face 4.5 in 4.5 in 2.75 in Max Cutout 3.375 in 3.375 in All PowerPods include: Acrylic capped ABS plastic Chromed Stainless Steel tamper-proof fasteners Double seal for watertight integrity Swivel Base with large pass-through for wire harness Models are available Pre-Cut for popular electronics

Read more less

NAVGP2600 SystemPodModel: GP2600SystemPod Un-Cut (usable face = 19.75"w x 6.0"h)(50.2cm w x 15.2cm h) for 12 in wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it, when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.SpecificationsHeight7.75 Width 21.5 Depth 4.46 Usable Face Height 6 Width 19.75 Depth 3.5 Max Cutout Height 5.45 Width 19.25

Read more less

NAVGP2518 SystemPodModel: GP2518SystemPod Pre-Cut for Simrad GO7/B&G Vulcan 7 (Pre Nov. 2017) and 1 inst. (3.6 in hole) for 12 in wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it,when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.SpecificationsHeight7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

Read more less

NAVGP2302 InstrumentPodModel: GP2302InstrumentPod Pre-Cut for three instruments (Simrad IS42 / B&G Triton2/AP44 square holes) for 12 in wide guardThe GP2302 InstumentPod comes Pre-Cut for mounting three Simrad IS42 / B&G Triton2/AP44 square hole Instruments on a 12 in wide guard. An InstrumentPod is best mounted on a StraightGuard or on the upper portion of a Double Bend AngleGuard with a SailPod mounted below.SpecificationsHeight6.25 Width 16.625 Depth 4.375 Usable Face Height 5 Width 15.3 Depth 3.125 Max Cutout Height 4.125 Width 14.5

Read more less

NAVGP2300 InstrumentPodModel: GP2300InstrumentPod Un-Cut (usable face = 15.3"w x 5"h)(38.9cm W x 12.7cm H) for 12 in wide guardThe GP2300 InstumentPod comes Un-Cut and is for mounting to a 12 in wide guard. Information at your finger tips. An InstrumentPod is best mounted on a StraightGuard or on the upper portion of a Double Bend AngleGuard with a SailPod mounted below. Usable face = 15.3"w x 5"h (46cm W x 11.4cm H)SpecificationsHeight6.25 Width 16.625 Depth 4.375 Usable Face Height 5 Width 15.3 Depth 3.125 Max Cutout Height 4.125 Width 14.5

Read more less

NAVGP2205 SailPodModel: GP2205SailPod Pre-Cut for Raymarine eS127/eS128 & AXIOM PRO 12 for 12 in wide guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it, when you need it". Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.SpecificationsHeight11.3 Width 16.5 Depth 5.55 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25

Read more less

NAVPOD RMX4500-08 RailmountModel: RMX4500-08RailMount Pre-Cut for Garmin GPSMAP 942xs/942/922xs/922RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1 in or 1.25 in diameter tube. A Nickel Chrome-Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch chartplotters.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!SpecificationsHeight7.69 Width 11.86 Depth 5.5 Overall Size Assembly Height 10.5 Width 13.91 Depth 6.3 Usable Face Height 6 Width 9.95 Depth 4.125 Max Cutout Height 5.5 Width 9.5

Read more less

NavPod PP5065 PowerPod Pre-Cut for Garmin 8012 / 8212 PP5060 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. H W D Overall Size 16 in 16.625 in 10.75 in Usable Face 10.375 in 13.875 in 6 in Max Cutout 10.375 in 13.75 in All PowerPods include: Acrylic capped ABS plastic Chromed Stainless Steel tamper-proof fasteners Double seal for watertight integrity Swivel Base with large pass-through for wire harness Models are available Pre-Cut for popular electronics

Read more less

NavPod PP5064 PowerPod Pre-Cut for B&G Zeus Touch Z12 and Simrad NSE12 PP5060 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. H W D Overall Size 16 in 16.625 in 10.75 in Usable Face 10.375 in 13.875 in 6 in Max Cutout 10.375 in 13.75 in All PowerPods include: Acrylic capped ABS plastic Chromed Stainless Steel tamper-proof fasteners Double seal for watertight integrity Swivel Base with large pass-through for wire harness Models are available Pre-Cut for popular electronics

Read more less

NavPod PP5063 PowerPod Pre-Cut for B&G Zeus Touch 12 and Simrad NSS12 PP5060 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. H W D Overall Size 16 in 16.625 in 10.75 in Usable Face 10.375 in 13.875 in 6 in Max Cutout 10.375 in 13.75 in All PowerPods include: Acrylic capped ABS plastic Chromed Stainless Steel tamper-proof fasteners Double seal for watertight integrity Swivel Base with large pass-through for wire harness Models are available Pre-Cut for popular electronics

Read more less

NAVPOD PP4600-13 PowerPodModel: PP4600-13PowerPod Pre-Cut for Furuno GP1971F 9? Multi Touch GPS / Chartplotter / Fish FinderPowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8" opening (1.1" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7?, 9?, 12?and 16? LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods â€" Protection, Convenience, Security.

Read more less

NAVPOD PP4600-10 PowerPodModel: PP4600-10PowerPod Pre-Cut for Garmin ECHOMAP Plus 92sv/93sv/94sv/95svPowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8" opening (1.1" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7?, 9?, 12?and 16? LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods â€" Protection, Convenience, Security.

Read more less

NAVPOD PP4600-08 PowerPodModel: PP4600-08PowerPod Pre-Cut for Lowrance HDS-9 Gen2 Touch / HDS-9 Gen3 / HDS Carbon 9PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1? for PP4100, PP4400, PP4500, PP4600 Series; 1.8? for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7?, 9?, 12? and 16? displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.

Read more less

NavPod PP4100 PowerPod Un-Cut (footprint 3.875"x 3.875 in) PP4100 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. H W D Overall Size 7.375 in 5.9 in 5.375 in Usable Face 4.5 in 4.5 in 2.75 in Max Cutout 3.375 in 3.375 in All PowerPods include: ?Acrylic capped ABS plastic Chromed Stainless Steel tamper-proof fasteners Double seal for watertight integrity Swivel Base with large pass-through for wire harness Models are available Pre-Cut for popular electronics

Read more less

NAVPM0841 PedestalMountModel: NAVPM0841PedestalMount Pre-Drilled Mounting Pedestal and Mounting Plate adds swivel to most 10 in to 16 in Chartplotters, MFD's and Fish Finders using the manufacturer's stock trunnion bracketNavPod's PedestalMount is designed for raising the fish finder off the deck for protection while providing tilt and swivel functionality for conveniently operating and viewing the display.The PedestalMount is for mounting the fish finder near the bow on sportfishing boats. The fish finder's trunnion bracket is to be mounted onto the top bracket of the PedestalMount. The top bracket has predrilled mounting holes that match up to most popular fish finder trunnion bracket mounting holes. The tilt functionality of the trunnion bracket is combined with the swivel feature of the PedestalMount. The added height of the 8 in tall PedestalMount makes operating and viewing the display very convenient. The tough and rugged black powder coated aluminum pedestal is 4 in in diameter with a 6.5 in round base. Connectors and wires that go into the back of the electronics are protected from being stepped on or inadvertently kicked and damaged. All wires and connections are routed internally through the pedestal base for protection.The operating convenience of tilt, swivel and added height combined with the protection for wires surely make the PedestalMount a great addition to many sportfishing boats.

Read more less

NAVGP292010 SailPodModel: GP2920-10SailPod Pre-Cut for Simrad NSO evo2 NSO evo3 16? / B&G Zeus2 Zeus3 Glass Helm 16? (MO16P-MO16T-ZM16T) for 12? angle guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it?when you need it". Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

Read more less

NAVGP2517 SystemPodModel: GP2517SystemPod Pre-Cut for Raymarine a65/a67/a68 and 1 inst. (3.6 in hole) for 12 in wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it,when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.SpecificationsHeight7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

Read more less

NAVGP2516 SystemPodModel: GP2516SystemPod Pre-Cut for Simrad NSS7 evo2/B&G Zeus2 7 and 1 inst. (3.6 in hole) for 12"wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it, when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.SpecificationsHeight7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

Read more less

NAVGP2204 SailPodModel: GP2204SailPod Pre-Cut for Raymarine a125/a127/a128 for 12 in wide guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it,when you need it". Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.SpecificationsHeight11.3 Width 16.5 Depth 5.55 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25

Read more less

NAVPOD RMX4500-02 RailmountModel: RMX4500-02RailMount Pre-Cut for Raymarine eS75/eS77/eS78RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1 in or 1.25 in diameter tube. A Nickel Chrome-Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch chartplotters.Structural Rigidity - The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal - All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel - We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!SpecificationsHeight7.69 Width 11.86 Depth 5.5 Overall Size Assembly Height 10.5 Width 13.91 Depth 6.3 Usable Face Height 6 Width 9.95 Depth 4.125 Max Cutout Height 5.5 Width 9.5

Read more less

NAVPOD PP5061 PowerPodModel: PP505061PowerPod Pre-Cut for Raymarine C120/E120PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8 in€ opening (1.1 in on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7 in, 9 in, 12"and 16&&" LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods â€" Protection, Convenience, Security.Specificationsin17.26 cm 43.8 Width in 16.62 cm 42.2 Depth in 10.3 cm 26.2 Usable Face Height in 10.75 cm 27.3 Width in 13.5 cm 34.3 Depth in 8.5 cm 21.6 Max Cutout Height in 11.5 cm 29.2 Width in 14.125 cm 35.9 PowerPod Base Height in 3.75 cm 9.5 Width in 9.21 cm 23.4 View Angle 20

Read more less

NavPod PP5060 PowerPod Un-Cut (footprint 8.25"x 8.25 in) PP5060 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. H W D Overall Size 16 in 16.625 in 10.75 in Usable Face 10.375 in 13.875 in 6 in Max Cutout 10.375 in 13.75 in All PowerPods include: Acrylic capped ABS plastic Chromed Stainless Steel tamper-proof fasteners Double seal for watertight integrity Swivel Base with large pass-through for wire harness Models are available Pre-Cut for popular electronics

Read more less

NAVPOD PP4600-06 PowerPodModel: PP4600-06PowerPod Pre-Cut for Simrad NSS9 evo3 / B&G Zeus3 9PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1? for PP4100, PP4400, PP4500, PP4600 Series; 1.8? for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7?, 9?, 12? and 16? displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.

Read more less