Hydraulic Steering Fluid - QuartThis is a perfect formulation for the most demanding marine environments. Engineered for use in all hydraulic steering solutions.Features: Applications: All Hydraulic Steering Systems High viscosity index Corrosion inhibited Oxidation resistant Excellent anti-wear performance Specifications: Size: Quart Type: ISO 15 Low Temp Mineral Hydraulic Fluid

Read more less

Autopilot Pump Type 3 Adjustable Reversing 12V Up to 30CI CylinderFeatures: RELIABLE - Piston pump technology with only three moving parts TWIC THE POWER - Delivers over twice the hydraulic output per watt of input HALF THE POWER CONSUMPTION - Accurate ram positioning means fewer course corrections ADJUSTABLE FLOW RATE - Configure performance to suit your vessel EASY SERVICING - Shut off valves allow removal without draining steering system TWICE THE POWERThe unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump.HALF THE POWER CONSUMPTIONGear pumps leak oil between the gears, while a piston (such as used in car engines) does not.  This means the piston pump will place the cylinder ram exactly where it is required, positioning the rudder accurately.  This gives far sharper steering, reducingunnecessary course corrections meaning battery consumption on Octopus pumps is up to half that of other pumps.PINPOINT ACCURACYLeading autopilot manufacturers choose Octopus pumps for their non RFB pilot systems which do not have a Rudder Feedback unit. Previously, slop in the system caused by gear leakage meant that a Rudder Feedback unit was necessary to tell the pilot the exact rudder position. As Octopus pumps will always bring the ram back to the required position the Rudder Feedback unit is not required, which also greatly simplifies installation.SAVE ON INSTALLATION COSTSA professional installation should always have a method of isolating the pump from the steering system - Octopus pumps feature inbuilt shut off valves in the pump manifold.ADJUSTABLE FLOW RATEA pump that does not have variable flow (unless dedicated to a range of cylinders such as our fixed 0.8L pump) will be operating too fast or too slow in 90% of cases.  Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate, which either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or it will operate at high pressure for short periods of time - also putting unnecessary strain and wear on the system.Octopus Variable Flow Reversing Pumps precisely control the speed of the ram, reducing unnecessary battery consumption, pressure, strain and wear on the hydraulic system. Specifications: Type: Pumps/Drives Box Dimensions: 5"H x 6"W x 12"L WT: 8.75 lbs UPC: 628309272791

Read more less

Autopilot Pump Type 2 - Adjustable Reversing Pump - 12V up to 18 CI CylinderNow with ORB Port Connection manifoldReversing pumps are used when hydraulic steering is fitted on boats up to 65 feet L.O.A. (depending on rudder torque). The pumps are switched on by the automatic pilot and make a steering correction to left or right determined by the direction of rotation of the pump motor. The motors are of the permanent magnetic type and reversing direction is accomplished by reversing the motor input current.The pump has only three moving parts and requires no complicated check valves to prevent rudder movement when de-energized. Output flow is completely adjustable to 50% of rated flow allowing the pump output to be adjusted precisely to the volume of steering cylinder fitted. The pump is exceptionally reliable and delivers more than twice the hydraulic output per watt of input than gear pumps manufactured by competitors.Motors are heavy duty, a full 85mm in diameter with long brushes and sealed ball bearings for long service life. The molded rubber mounting foot can be rotated to allow the pump to be mounted on any surface.A useful range of accessories can be used to enhance the pump by incorporating added valves and solid state FET switching. The valves mount directly to the pump body. The FET switch mounts adjacent to the pump. No other autopilot pump made offers such advantages.Benefits of the Octopus Reversing PumpsPiston pump technology giving higher efficiency and accuracy Fewer moving parts giving increased reliability Variable flow rate to make sure the pump is matched as accurately as possible to the manual steering system Professional cut off valves for simple servicing.Features: Average Current 4-6 amps Max Current 19amps 12vDC Cylinder Size: 11-22ci Flow Rate(adjustable): 600cc - 1.2 litre/min Specifications: Type: Pumps/Drives Box Dimensions: 5"H x 6"W x 12"L WT: 8.35 lbs UPC: 628309272777

Read more less

Autopilot Pump Type 1 Adjustable Reversing 12V Up To 15 CI CylinderTWICE THE POWERThe unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump.HALF THE POWER CONSUMPTIONGear pumps leak oil between the gears, while a piston (such as used in car engines) does not.  This means the piston pump will place the cylinder ram exactly where it is required, positioning the rudder accurately.  This gives far sharper steering, reducingunnecessary course corrections meaning battery consumption on Octopus pumps is up to half that of other pumps.PINPOINT ACCURACYLeading autopilot manufacturers choose Octopus pumps for their non RFB pilot systems which do not have a Rudder Feedback unit. Previously, slop in the system caused by gear leakage meant that a Rudder Feedback unit was necessary to tell the pilot the exact rudder position. As Octopus pumps will always bring the ram back to the required position the Rudder Feedback unit is not required, which also greatly simplifies installation.SAVE ON INSTALLATION COSTSA professional installation should always have a method of isolating the pump from the steering system - Octopus pumps feature inbuilt shut off valves in the pump manifold.ADJUSTABLE FLOW RATEA pump that does not have variable flow (unless dedicated to a range of cylinders such as our fixed 0.8L pump) will be operating too fast or too slow in 90% of cases.  Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate, which either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or it will operate at high pressure for short periods of time - also putting unnecessary strain and wear on the system.Octopus Variable Flow Reversing Pumps precisely control the speed of the ram, reducing unnecessary battery consumption, pressure, strain and wear on the hydraulic system.Getting the best steering performance for the boat. The flow rate of the pump can be set to get the best hard over time (cylinder ram speed) for the particular boat. Features: Reliable - Piston pump technology with only three moving parts Twice the Power - Delivers over twice the hydraulic output per watt of input Half the Power Consumption - Accurate ram positioning means fewer course corrections Adjustable Flow Rate - Configure performance to suit your vessel Easy Servicing - Shut off valves allow removal without draining steering system Specifications: Type: Pumps/Drives Box Dimensions: 5"H x 6"W x 12"L WT: 8.3 lbs UPC: 628309272753

Read more less

Seal Kit for Reversing PumpReversing pump seal kit

Read more less

30" Hose & Fitting Kit Including Orb & NPT Helm FittingsHydraulic Hose & Fittings Kit Includes: (2) - 30" Flexible High Pressure Hyd. Hose's (1) - 30" Flexible Low Pressure Hyd. Hose O.R.B Helm fitting kit NPT helm fitting kit  Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 10"W x 14"L WT: 2.3 lbs UPC: 628309248321

Read more less

Simrad Resistance to Frequency Conversion Kit OC15SUK83Required for Simrad Autopilots Specifications: Type: Parts Box Dimensions: 4"H x 7"W x 7"L WT: 0.6 lbs UPC: 628309178062

Read more less

Integrated Rudder Feedback UnitsOC15SUK27ETypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The standard RFB unit's (OC15SUK27A - OC15SUK27E) are dedicated to a particular manufacturer.Both types are attached directly to the drive unit for simple installation. Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.5 lbs UPC: 628309166595

Read more less

Integrated Rudder Feedback UnitsOC15SUK27BTypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The standard RFB unit's (OC15SUK27A - OC15SUK27E) are dedicated to a particular manufacturer.Both types are attached directly to the drive unit for simple installation. Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.4 lbs UPC: 628309166571

Read more less

Steering Cable Adapter KitOC15SUK08f/ TFX SSC62 - Uflex M66 Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.4 lbs UPC: 628309133634

Read more less

Steering Cable Adapter KitOC15SUK07f/TFX SSC72 - Uflex M47 - Morse 304415 Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.3 lbs UPC: 628309133627

Read more less

Unbalanced Valve KitOC17SUK03 Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.5 lbs UPC: 628309134075

Read more less