Navilight 360° 2NM White w/Navimount Base & Vertical Mount - White Navimount Base Lights will work with Railblaza mounting systems, when used with the Railblaza 932 converter. Navimount base lights include a U-Bracket and Navibolt-bracket.Features: 360° All-round/Anchor light with 15 hour burn time 225° Masthead light with 24 hour burn time 135° Sternlight with 32 hour burn time Safety/Flashing light with 85 hour burn time Cabin/Courtesy light with 72 hour burn time Navimount Vertical - WhiteThe Navimount Vertical is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to vertical surfaces - e.g. the transom of an inflatable boat, canoe & kayak cockpit or steering console.Includes: Vertical Mount Two self tapping stainless steel screws WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lens Color: White Visible Range (Miles): 2nm Housing: White Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) LED: Yes Box Dimensions: 2"H x 3"W x 5"L WT: 0.5 lbs

Read more less

MoveVent Dynamic Paddle Sports Vest - Yellow/Grey - XL/2XLThe Onyx MoveVent is a vest that conforms to your body like a glove, yet its innovative vented channels help keep you cool while paddling. The mesh ventilation is featured in the front and back of the MoveVent series jackets to allow for maximum airflow.Features: Soft, lightweight flotation foam SOLAS grade reflective material for visibility Expandable zippered pocket with mesh drainage Lash tab for small accessories Drying loop on back Attached whistle for safety Provides excellent mobility for recreational paddle sports (canoe, kayak, SUP) Ventilation in front and back to keep you cool Mesh in lower back fits high back seats and sit-on-top kayaks Sculpted and flexible design conforms to you and stays in place Shoulder adjustments with neoprene comfort pads Adjustable side belts Strong, durable zipper closure Zip assist loop at zipper base Technical Specifications: Chest Size- 44"-56" Weight - 90lbs and over Material - 200 denier nylon ripstop and nylon oxford * U.S. Coast Guard Approved Type III Life Jacket / Personal Flotation Device (PFD) Specifications: Color: Grey/Yellow Inflatable: No Size: XL/2XL USCG Approved: Yes Box Dimensions: 5"H x 13"W x 20"L WT: 1.2 lbs UPC: 043311961516 Brochure (pdf)

Read more less

Universal Paddle PFD Life Jacket - Adult - Blue/PurpleWhen it comes to life jackets, one size doesn't fit all.  That's why we have a wide range of life vests tailored to how you spend your time on the water.  Whether you're boating with friends and family, fishing, kayaking, water skiing or something in between, all Onyx child, youth, and adult life jackets are U.S. Coast Guard and Transport Canada approved and provide comfort, safety, and peace of mind.  Take a look at our selection of traditional inherently buoyant foam-filled vests as well as our inflatable life jackets.Features: Flex-cut foam for low profile, lightweight, compact fit High foam back accommodates high back seats Breathable mesh lower back Six adjustment straps to cinch the vest up to fit snug Comfortable neoprene shoulder pads Large front pocket U.S. Coast Guard approved and Transport Canada approved Color: Blue/Purple Specifications: Color: Blue Inflatable: No Size: Universal USCG Approved: Yes Box Dimensions: 5"H x 16"W x 20"L WT: 0.7 lbs UPC: 043311982771

Read more less

0134 Action Camera Mount 2.0 with Post, Track & Rail MountsThis Scotty action camera mount is compatible with GoPro and other action cameras.Features: Dual ball joints provide infinite flexibility for positioning Easy Grip T knob Post mount that fits all Scotty post mounting options Track mount option included  Rail Mount option included (fits 7/8 – 1-1/4 in. rails)

Read more less

Ball Mounting System w/Universal Mounting PlateFeatures: The new Scotty Ball System with Universal Mounting Plate provides a mounting platform for a variety of accessories The ball joint design of the Scotty 150 enables a smooth, full range of motion The corrosion proof construction of this system provides a long service life in both fresh and salt water applications Base Mount Dimensions: 2-1/4″ x  2-1/4″ Mount Height: Stands 6-3/4″ tall

Read more less

Survival Res-Q™ Whistle with Lanyard Get attention when you need it with the ResQ™ Whistle.  This compact survival whistle was specially developed to locate boaters who’ve fallen overboard, but it can also aid in land rescues. The ResQ issues a shrill dual-tone up to 100 decibels, which is audible over great distances.  The unique, flat design of this whistle keeps it from holding water, and its 31.5" (80 cm) lanyard easily attaches to life jackets, rafts, and other weather gear. Features: Loud, shrill, dual tone audible from great distance Unique flat design Meets USCG/SOLAS requirements Aids in land or sea rescues *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Angled SUP ArmsDesigned specifically for use with any of Magma’s storage rack systems and angled to maximize space. These arms are perfect for storing SUP’s or other water sports boards.  Constructed with 1 in. (25.4 mm) Dia. 304 Marine Grade Mirror Polished Stainless Steel tubing and include Stainless Steel installation fasteners.  Each arm has a tie-down point for securing boards while the pre-installed UV resistant foam padding with heavy duty UV resistant 600D Polyester protective covers help protect them.Compatible With:Magma R10-1003-64 and R10-1002-64 racksFeatures: Includes UV Resistant Polyethylene Foam Pads SUP Arms are angled/bent to hold your SUP safely in place Technical Specifications: Material - 304 Marine grade Stainless Steel  Dimensions (L x W x H) - 20-5/8" x 2-1/4" x 12-3/4" (52.4 x 5.7 x 32.4 cm) Weight - 5.6 lbs (2.55 kg) *Sold as a Pair

Read more less

MoveVent Dynamic Paddle Sports Life Vest - M/LThe Onyx MoveVent is a vest that conforms to your body like a glove, yet its innovative vented channels help keep you cool while paddling. The mesh ventilation is featured in the front and back of the MoveVent series jackets to allow for maximum airflow.Features: Soft, lightweight flotation foam SOLAS grade reflective material for visibility Expandable zippered pocket with mesh drainage Lash tab for small accessories Drying loop on back Attached whistle for safety Provides excellent mobility for recreational paddle sports (canoe, kayak, SUP) Ventilation in front and back to keep you cool Mesh in lower back fits high back seats and sit-on-top kayaks Sculpted and flexible design conforms to you and stays in place Shoulder adjustments with neoprene comfort pads Adjustable side belts Strong, durable zipper closure Zip assist loop at zipper base Technical Specifications: Chest Size- 36"-44" Weight - 90lbs and over Material - 200 denier nylon ripstop and nylon oxford * U.S. Coast Guard Approved Type III Life Jacket / Personal Flotation Device (PFD) Specifications: Color: Orange/Grey Inflatable: No Size: M/L USCG Approved: Yes Box Dimensions: 4"H x 18"W x 21"L WT: 1.3 lbs UPC: 043311040419 Brochure (pdf)

Read more less

0139 Phone Holder with Post, Track & Rail MountsThis Scotty phone holder is made with engineering-grade nylon and has an opening for charging the charging device.Features: Dual ball joints provide infinite flexibility for positioning Easy Grip T knob Stainless steel hardware The snob allows for width adjustments, securing devices between 2-3/4 in. and 3-3/4 in. wide Post mount that fits all Scotty post-mounting options Track mount option included Rail Mount option included (fits 7/8 – 1-1/4 in. rails)

Read more less

Fly Rod Holder267The Fly Rod Holder combined with adjustable wrap-around straps and quick-release clips to use with your float tube or pontoon boatInnovative compact design allows hands free trolling with a fly rod. Fully adjustable and includes a safety strap. Even works well with "short butt" fly rodsWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

EVO-FX Fixed Rod Holder with 8.5" at 0 DegreesCrafted with the highest quality materials to ensure a secure and reliable fishing experience. Its sturdy design and easy installation make it the top choice for professional anglers. Upgrade your fishing gear and trust in its durability and stability for a successful fishing trip.Features: Rod Sleeve: Rolled and polished, seamless 316 stainless steel. Bearings: Injection molded ultra-high molecular weight polyethylene for ultra-high wear, chemical, compression, and shear resistance. Base Plate: Precision cast, stamped, machined, and polished 316 stainless steel. Top Cover: Precision cast, machined, and polished 316 stainless steel. Isolation Gasket: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. Locking lever: Precision cast, machined, and polished 316 stainless steel. Locking lever cover: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. M x 7.5mm 316 stainless steel Phillips drive, countersunk screw, nut, and washer. Sleeve Guide: Resilient rubber blend, designed specifically to be very tough and wear-resistant. Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3 lbs UPC: 835719003673

Read more less

EVO-FX Fixed Rod Holder with 8.5" at 30 DegreesCrafted with the highest quality materials to ensure a secure and reliable fishing experience. Its sturdy design and easy installation make it the top choice for professional anglers. Upgrade your fishing gear and trust in its durability and stability for a successful fishing trip.Features: Rod Sleeve: Rolled and polished, seamless 316 stainless steel. Bearings: Injection molded ultra-high molecular weight polyethylene for ultra-high wear, chemical, compression, and shear resistance. Base Plate: Precision cast, stamped, machined, and polished 316 stainless steel. Top Cover: Precision cast, machined, and polished 316 stainless steel. Isolation Gasket: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. Locking lever: Precision cast, machined, and polished 316 stainless steel. Locking lever cover: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. M x 7.5mm 316 stainless steel Phillips drive, countersunk screw, nut, and washer. Sleeve Guide: Resilient rubber blend, designed specifically to be very tough and wear-resistant. Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.5 lbs UPC: 835719003710

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 15 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.75 lbs UPC: 8858541005686 Brochure (pdf)

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 30 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.5 lbs UPC: 835719003772

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 0 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.75 lbs UPC: 835719003734 Brochure (pdf)

Read more less

Baitcaster Rod HolderTrack Combo w/Gearhead & 4" TrackIncludes:280 Baitcaster / Spinning Rod Holder438 Gear-Head 440-4 Low Profile TrackThe Baitcaster / Spinning Rod holder is a versatile rod holder for any angler. The baitcaster reel sits in a cushioned cradle while a front slot allows for a spinning reel. The open bottom allows for the rod holder to accommodate trigger grips as well. Rods can be secured with a soft latching strap which snaps over the top for baitcaster or under the bottom for spinning reels. The 438 Gear-Head Track Adapter quickly slides into place and locks down Scotty rod holders and accessories, this allows you to quickly change rod holder positions with a simple twist. The Scotty 440-4 Low Profile Track is made from high strength composite material. The track can be quickly and easily installed on a kayak, canoe or any other watercraft.Dimensions: 1-3/4" wide x 3/8" tall x 7" long (4" usable track)WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Fibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pin Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

MoveVent Curve Paddle Sports Life Vest - XS/SMThe Onyx MoveVent is a vest that conforms to your body like a glove, yet its innovative vented channels help keep you cool while paddling. The mesh ventilation is featured in the front and back of the MoveVent series jackets to allow for maximum airflow.Features: Soft, lightweight flotation foam Provides excellent mobility for recreational paddle sports (canoe, kayak, SUP) Ventilation in front and back to keep you cool Mesh in lower back fits high back seats and sit-on-top kayaks Sculpted and flexible design conforms to you and stays in place Shoulder adjustments with neoprene comfort pads Adjustable side belts Strong, durable zipper closure Zip assist loop at zipper base Technical Specifications: Chest Size- 28"-36" Weight - 90lbs and over Material - 200 denier nylon ripstop and nylon oxford * U.S. Coast Guard Approved Type III Life Jacket / Personal Flotation Device (PFD) Specifications: Color: Blue Inflatable: No Size: XS/S USCG Approved: Yes Box Dimensions: 4"H x 13"W x 18"L WT: 1.15 lbs UPC: 043311056434 Brochure (pdf)

Read more less

Dingy Visibility KitLooking for a way to make sure your boat is seen out on the water? The Dinghy Visibility Kit is your go-to solution! This convenient kit is designed with small, tiller-steered power boats and inflatables up to 23 feet and 8 MPH in mind – so you can stay safe while you cruise around. You get all the gear needed to stay compliant with legal requirements around the world in one money-saving pack. Plus, setup and takedown are simple, making it easier than ever to pack up after a day of relaxing on the water. And that’s not all: when you’re done, you can stow this visibility kit pretty much anywhere thanks to its handy storage bag. Whether you’re taking a leisurely ride in your dinghy or going for an adventure on the open seas, make sure your ride stays visible with this essential kit!Dinghy Visibility Kit Overview:KEEP YOUR BOAT VISIBLE - Make sure your vessel is seen by other boats and pedestrians with this comprehensive visibility kit. EASY SETUP AND TAKEDOWN - Quick and easy to set up, so you can spend more time on the water and less time fussing with gear. FITS SMALLER BOATS AND INFLATABLES - This kit is designed specifically for small powerboats and inflatables up to 23 feet and 8 MPH. COMPLIANT WITH LEGAL REQUIREMENTS WORLDWIDE - Stay safe while you cruise around with this essential gear.CONVENIENT STORAGE - The storage bag makes it easy to take this kit with you wherever you go, without taking up too much space. Specifications: Color: Black Inflatable: No Box Dimensions: 2"H x 4"W x 16"L WT: 1 lbs UPC: 9421026833549

Read more less

Gator Patch 9" x 12" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

Navilight All-White 5 Mode 360° 2NM with RAILBLAZA BaseThe Navilight All-Around white RB 2NM - US Coast Guard approved for 2 nautical miles is the most versatile light of Navisafes range of battery operated portable navigation lights and includes a 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light and a Cabin light. It is battery operated, uses super bright LED light, is water proof, floats and is fully compatible with the RAILBLAZA StarPort Mounting system. RAILBLAZA is a New Zealand based supplier of one of the most versatile and EASY-TO-USE Mounting systems for boats, ATVs, RVs or trailer. The base of the Navi light has the form of a star and will fit directly in many Anchor Winches and Winches as well as to specially designed mountings, such as the Navisafe RAILBLAZA Sideport, the Navisafe RAILBLAZA Starport and the Navisafe RAILBLAZA RailMount.Examples of Usage:*Based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGs.On a power driven vessel underway of 12M or more in length but less than 50M in length: Sternlight All-round white light On a power driven vessel underway of less than 12M in length: Masthead light Sternlight All-round white light On a power driven vessel underway of less than 7M in length whose maximum speed does not exeed 7 knots:All-round white lightRowing / Paddle vessels: All-round white light Anchored vessels and vessels aground:Anchor lights must always be shown from sunset to sunrise.All-round white light Specifications: Lens Color: White LED: Yes Housing: Black Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) Visible Range (Miles): 2nm Box Dimensions: 3"H x 4"W x 5"L WT: 0.25 lbs UPC: 814154018657

Read more less

6W Floating Handheld Marine VHF TransceiverCompact Case DesignCompact, ergonomic case design is a result of the new internal, large capacity 1850 mAh Lithium Ion battery technology. This gives the radio a much smaller case design yet light enough to float face up if dropped in the waterWater Activated Emergency Strobe lightIf the radio falls in the water an emergency strobe light is automatically activated, even when the unit is turned off!!! The strobe can be reconfigured to flash on and off, flash SOS, or set to stay on continuously.Oversized full dot matrix displayThe HX210 boasts one of the largest displays in a compact and affordable handheld VHF. With a larger display, greater (dot matrix) resolution, and a super bright backlight there will be no mistaking the information displayed on the face of the radio day or night.E20 Easy to Operate Menu SystemNew intuitive menu system allows easy access to all of the setup functions of the radio, making it easy to customize settings based on the preferences of the userBuilt in FM Broadcast band receiveThe HX210 has an expanded receiver allowing the user to tune in to their favorite FM radio station. The radio will receive FM broadcast bands between 76 MHz to 108 MHz.3-year Waterproof WarrantyBecause the HX210 is built better, it’s backed better. If your Standard Horizon HX210 ever fails for any reason including water damage during normal use in the first three years, STANDARD HORIZON will repair or replace it free, without hassle or charges…period! If it fails thereafter in normal use it is covered by Standard Horizon’s Flat Rate Service Program.Features: Floating / Submersible IPX7 Waterproof rating (3.3 feet or 1 meter for 30 minutes) All USA, International and Canadian channels Selectable 6W / 2.5W / 1W output power Receive WX and FM radio bands 76MHz to 108MHz High resolution dot matrix LCD display E2O Easy to Operate Menu system Programmable function keys Speaker mic Jack High capacity 1850 mAh Li-Ion battery 3 hour desktop rapid charger 12VDC and 110VAC charging cables and charging cradle included 3 year waterproof warranty Specifications: Bluetooth: No Floats: Yes Built-In GPS: No Battery Type: Lithium Ion Power - Output (Watts): 1/2.5/6w Speaker Mic: Optional Waterproof Rating: Submersible Weather Alert: Yes Box Dimensions: 4"H x 7"W x 10"L WT: 1.7 lbs UPC: 788026174225 Owner's Manual (pdf)

Read more less

Kayak Hatch Cover - 8" - VCP RoundThis 8" Round Hatch Cover is great as a replacement for lost or damaged lids. This performance hatch features our unique two-part construction for maximum protection. Designed to float when dropped in the water and is easy to attach while still offering a superior watertight seal. Constructed in the USA using the highest-quality injection molded polymer. Compatible with the Valley Canoe Products® (VCP) round day hatch when mounted on an injection molded rim bolted/glued to the deck; not recommended for rotomolded kayaks that do not feature this rim *Sea-Dog® is not affiliated with Valley Sea Kayaks® and/or Kayak Sport®, reference to these brands only indicates similar sizing of hatch cover products)Features: Proudly constructed in the USA of injection molded nylon and polypropylene Lid only Specifications: Diameter: 8 in. Style: Performance Weight: 0.55 lbs. Standard Pack: 1 Shape: Round WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Trucourse™ Rudder Mounting Gudgeon (Universal Bracket)This gudgeon is required to mount Sea-Dog's Trucourse™ Rudder to kayaks with pre-tapped mounting holes with screw inserts found on the stern of the kayak (includes Wilderness System®, Necky®, Ocean Kayak®, Emotion®, and more). Features:Constructed of stamped 304 stainless steelSpecifications:Weight: 0.30 lb.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Anchor Kit797 50' Premium Nylon Line 1.5lb Folding Anchor Watertight Buoyant Container - doubles as a bailer Nylon Snap Hook, for easy attachment to vessel For still water use. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

HEXX™ RailMount 32-41Calling all anglers! Looking to upgrade your rail-mounting situation? Look no further – check out the HEXX RailMount 32-41. Ideal for any rails measuring from 1.25 – 1.7 inches (32-41mm) in diameter, this handy device allows you to easily mount a RAILBLAZA HEXX™ live transducer pole, heavy-duty fish finder or the strike-ready HEXX Rod Holder in an instant. With its durable construction, you can rest assured you won’t have to worry about awkward, loose-fitting mounting issues. And if that’s not enough, you can adjust the integrated grub screw for extra holding power. Our HEXX RailMount fits the Hobie H-Rail too, so no matter your preference, you can upgrade your setup with ease. Get ready to revolutionize your rail mounting today with HEXX RailMount 32-41.Purpose designed for rails. Effortlessly install a RAILBLAZA HEXX™ live transducer pole, HEXX heavy-duty fish finder, or the strike-ready HEXX Rod Holder onto your rails. Solidly constructed from durable materials, the clever HEXX RailMount features an integrated grub screw for extra holding power. HEXX RailMount 32-41 Fits perfectly on rails 1.25 and 1.7” (32 and 41mm) in diameter plus Hobie H-Rail.HEXX RailMount 32-41 Overview:Effortlessly install a RAILBLAZA HEXX™ live transducer pole, heavy-duty fish finder, or the strike-ready Rod Holder with this cleverly constructed RailMount. Expertly crafted from durable materials to ensure your rail-mounted accessories stay in place even in the toughest conditions. Perfectly designed to fit 32 and 41-mm rails plus Hobie H-Rail for maximum security and stability. Integrated grub screw provides extra holding power while giving you more control over your installation. This simple yet effective solution adds flexible functionalities and secures your equipment on boats without hassle.Features: Quickly and conveniently mount fishing and other equipment onto rails Constructed from durable materials for added strength Grub screw incorporated for extra holding power Contoured to perfectly fit rails 1.25 and 1.7” (32 and 41mm) in diameter Compatible with both regular rail systems and Hobie H-Rail Specifications: Weight: 0.67 lbs Material Composition: Fiberglass-reinforced nylon components and stainless steel fasteners Parts Included: HEXX RailMount 32-41 Stainless Hardware

Read more less

Airspan Breeze Life Jacket - XL/2X - PurpleThe minimal design of the Onyx AirSpan Breeze life jacket provides hours of comfort for the paddler, allowing them to move their arms with ease due to the low-profile front foam, sculpted upper back foam, and large armholes.A key feature of this vest is the AirSpan technology located on the vest's back. When the side webbing straps are adjusted to a snug fit, the inner mesh panel expands and an air gap between your back and the foam is formed. This allows for added breathability and airflow to keep you cool when paddling on those warmer weather days on the water. The six adjustment points let you create a customized, secure fit.The AirSpan Breeze has two large pockets with stretchable Airprene panels to store necessary gear and allow for drainage.  The reflective material on the front and back, along with a loop on the back for a light attachment, provide increased visibility. Features: As you tighten the body straps, the inner mesh panel expands, providing airflow to your back and keeping you cooler while paddling and fishing Low profile front foam and sculpted upper back allows full range of motion Thin back foam accommodates most canoe and kayak seats  Shoulder adjustments with airprene comfort pads & shoulder webbing tuck away Two large pockets with stretchable airprene panels accommodate necessary gear and allow drainage Certifications:U.S. Coast Guard approved and Transport Canada approvedTechnical Specifications: Color - Purple Size - XL/2X *Sold as an individual Specifications: Color: Purple Inflatable: No Size: XL/2XL USCG Approved: Yes Box Dimensions: 3"H x 15"W x 19"L WT: 0.8 lbs UPC: 043311980647

Read more less

SUP/Kayak RackFeatures: 32" wide support arms fits 2 kayaks, canoes, sup, surfboards, etc. Adjustable locking straps, with locking hook at one end Supports many times the weight of an average kayak 2' spacing lower rack Top rack open to accomodate any height Robust powder coated metal square tubing combined with thick metal fabrications and MIG welded for strength Universal mount is easy to assemble and take down Removable bolt detaches assembly for quick storage Powder coated popular grey Hammertone

Read more less

RibPort Base with 3M Backing - GreyTired of being limited to rigging and outfitting your inflatable boats, stand-up paddle boards, and coolers the traditional way? Introducing the revolutionary RAILBLAZA RibPort Base with 3M Backing! This innovative product allows you to enhance your water adventures by adding StarPort attachments such as rod holders, drink holders, navigational lighting, and even a camera mount – all without having to cut any holes into the craft itself. Installation is simple! The 4.5×6” base is easily applied with the included 3M adhesive backing to any flat surface, so you can instantly attach any RAILBLAZA accessory. Plus, it’s available in your choice of three colors: black, white, or grey.  With the RAILBLAZA RibPort Base with 3M Backing, you’ll never be limited by your gear ever again. Unlock endless possibilities and create a whole new level of fun on the water today!Say goodbye to limited water adventures and HELLO to limitless possibilities with the RAILBLAZA RibPort Base with 3M Backing! Instantly customize your inflatable boats, stand-up paddle boards, and coolers with the no-hassle installation of StarPort attachments. Get yours in black, white, or grey - it's time to get creative!RibPort Base with 3M Backing Overview:TIRED OF BEING LIMITED? - The RAILBLAZA RibPort Base with 3M Backing is a revolutionary new product that allows you to add StarPort attachments to your inflatable boats, stand-up paddle boards, and coolers without having to cut any holes in the craft itself.SIMPLE INSTALLATION - The 4.5x6” base is easily applied with the included 3M adhesive backing to any flat surface, so you can instantly attach any RAILBLAZA accessory. Plus, it’s available in your choice of three colors: black, white, or gray.UNLOCK ENDLESS POSSIBILITIES - With the RAILBLAZA RibPort Base with 3M Backing, you’ll never be limited by your gear ever again. Add rod holders, drink holders, navigational lighting, and even a camera mount to your adventures - all without having to cut any holes into the craft itself.Features: Add accessories to your inflatable boat, SUP, or cooler without tools Installation is simple with the included 3M adhesive backing Available in black, white, or grey Unlock endless possibilities for your next water adventure Specifications: Weight: 0.42 lbs Material Composition: UV stabilized AES plastic Non-leeching UV stabilized PVC plastic Stainless Steel Fasteners 3M VHB Pad Parts Included: 1 x RibPort 1 x 3M Backing Available in 3 colors  03-4064-11 - RIBPort Black 03-4064-21 - RIBPort White 03-4064-51 - RIBPort Grey

Read more less

Rod Holder II with MiniPort TracMountDon’t let yourself be limited when it comes to fishing — the RAILBLAZA Rod Holder II with MiniPort TracMount will help you catch more fish without compromise. This rod holder can hold any type of rod and reel, and features quick adjustments with a rotating collar for reduced ‘strike-theft’, a gimbal lock for compatible rods, and an adjustable 360-degree range and over 90-degree vertical range. And if that isn’t enough, the RAILBLAZA MiniPort TracMount fits most existing tracks from both sides of your kayak. Plus, no tools are required when repositioning.  Don’t limit your angling fun – reach for the Rod Holder II with MiniPort TracMount for stress-free success in your next fishing adventure.Don't be limited when it comes to fishing - get the RAILBLAZA Rod Holder II with MiniPort TracMount and never let another fish escape! This rod holder is adjustable, fits most tracks, and requires no tools. Experience maximum angling success with this awesome piece of gear - go catch a big one!Rod Holder II with MiniPort TracMount Overview:NO LIMITS - You're not limited to what you can catch when you have the RAILBLAZA Rod Holder II with MiniPort TracMount. This rod holder can hold any type of rod and reel, so you can fish with the confidence that your equipment is secure.QUICK ADJUSTMENTS - With a rotating collar for reduced ‘strike-theft’, a gimbal lock for compatible rods, and an adjustable 360-degree range and over 90-degree vertical range, the RAILBLAZA Rod Holder II with MiniPort TracMount is designed for quick adjustments and easy use.FITS MOST TRACKS - The RAILBLAZA MiniPort TracMount fits most existing tracks from both sides of your kayak, so you can reposition it easily without any tools.ENJOY FISHING WITHOUT COMPROMISE - When you have the RAILBLAZA Rod Holder II with MiniPort TracMount, you'll be able to fish without compromise and catch more fish than ever before.Features: Rod Holder II is compatible with baitcasting, spinning, offshore, and fly reels Rotating collar helps prevent “strike theft” StarPort Base rotates 360 degrees 90-degree vertical rotation RAILBLAZA compatible track mount base that requires no tools for repositioning Fits Wilderness Systems, Native Watercraft, Jackson Kayak, YakAttack, Scotty, YakGear, and RAILBLAZA tracks. Loosening, adjusting, and tightening is as simple as turning with your hand MiniPort Can Be Used With Many Other RAILBLAZA Kayak Rail Accessories Specifications: Weight: 0.80 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included: 1 x RodHolder II 1 x MiniPort TracMount Specifications: Finish: Black Mounting Style: Surface Type: Vertical Mount Box Dimensions: 3"H x 6"W x 10"L WT: 0.8 lbs UPC: 814162020826

Read more less

Tracloader 45 StarPortThe Tracloader 45 StarPort is the perfect accessory for your boat without the need to drill any holes! Easily attach this port in minutes to your 45-degree gunnel tracks, compatible with many popular brands such as LUND, LOWE, EXCEL, Express, and early model Crestliner boats. Make installing gear easy and efficient by adding a Tracloader 45 StarPort. It features a convenient tool-free installation and can be moved or repositioned in no time – just turn it 180° for either horizontal or vertical mounting. Say goodbye to drilling unsightly holes in your boat hull and feel confident that you’ll have quick, secure gear attachment every time. Get ready to turn heads out on the water with The Tracloader 45 StarPort!Make your boating trips easier and more efficient with The Tracloader 45 StarPort! No drilling is required – just a quick, tool-free installation to attach your gear in minutes. Get ready to turn heads out on the water with confidence!Tracloader 45 StarPort Overview:THE PERFECT ACCESSORIZER FOR YOUR BOAT - No need to drill any holes! Easily attach this port in minutes to your 45-degree gunnel tracks, compatible with many popular brands such as LUND, LOWE, EXCEL, Express, and early model Crestliner boats.EASY INSTALLATION - Tool-free installation means you can have this port up and running in no time – just turn it 180° for either horizontal or vertical mounting.CONVENIENT MOVABILITY - Can be easily moved or repositioned whenever you need it – perfect for changing gear on the go. TURN HEADS OUT ON THE WATER - With The Tracloader 45 StarPort, you'll have a quick, secure gear attachment every time. Get ready to turn heads out on the water with this must-have accessory!Features: Super strong made from high quality, UV stabilized, fiberglass-reinforced polymers Tool-free, simple installation, no drilling required Holds any RAILBLAZA accessory using the StarPort mounting system Specifications: Weight: 0.30 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included:1 x TrackLoader 45 T-Rail Hardware

Read more less

TracLoader Gunnel Track 300mm 12"The TracLoader Gunnel Track goes on the gunnel or console of your boat, to let you easily fit rod holders, tackle storage, drink holders, and many other useful accessories, tool-less and repositioned or put away in seconds. Designed for boats that do not have tracks installed, giving them all the versatility of RAILBLAZA TracLoader StarPort Mounts. Great for fiberglass boats & aluminum boats with vertical gunnels. Available in three different lengths, the anodized aluminum tracks with mounting slots and all fasteners supplied make for easy installation. Once installed, you simply choose the correct RAILBLAZA TracLoader Mount for your application. TracLoader Mounts and part numbers are listed below. Three lengths available • 12” • 20” • 39” *Mounts and accessories are ordered separately.Tired of spending your summer weekends trying to figure out how to fit all your gear onto your boat? Look no further than TracLoader Gunnel Track! This versatile anodized aluminum track will make customizing and re-configuring your boat setup a breeze - no tools or complicated installations necessary. Cruise away in style with the perfect accessories for every outing!TracLoader Gunnel Track 1000  (39")Overview:STRESS-FREE ACCESSORY FITTING - The RAILBLAZA TracLoader Gunnel Track is an easy and stress-free way to fit accessories, rod holders, tackle storage boxes, and drink holders onto your boat. This versatile anodized aluminum track is designed to mount onto the gunnel or console of your boat – it's perfect for fiberglass boats or aluminum boats with vertical gunnels. Installation is fast and secure, and all the necessary hardware is included.CUSTOMIZE YOUR BOAT EXACTLY HOW YOU WANT IT - Now you're ready to outfit your boat exactly how you want! Just choose the correct RAILBLAZA TracLoader Mount for whatever accessories you need, and attach away - no tools necessary! Since everything can be easily repositioned or taken away within seconds, it's a snap to adjust any time you like.VERSATILE AND EASY TO USE - Go ahead - get on out of there with your customized boat set-up in tow! The RAILBLAZA TracLoader Gunnel Track is versatile and easy to use, so you'll be able to customize your boat exactly the way you want it in no time at all.Features: Mounts easily and securely to gunnel or console Perfect for fiberglass or aluminum boats with vertical gunnels Includes all necessary hardware for installation Can be quickly and easily adjusted to your needs Specifications: Weight: 0.45 lbs Material Composition: Aluminum and Glass-Filled Nylon Parts Included: 1 x TracLoader Gunnel track 300mm Stainless hardware Specifications: Type: Track Mount Box Dimensions: 1"H x 2"W x 13"L WT: 0.5 lbs UPC: 814162021502

Read more less

Garmin Fishfinder Mount Low ProfileWhen it comes to finding where the fish are hiding, every second counts. With the Garmin Fishfinder Mount Low Profile, you can easily install an ECHOMAP™ UHD, UHD2, and STRIKER™ model and get fishing almost immediately! This universal and versatile mount is designed with RAILBLAZA’s StarPort mounting system — which attaches securely to your boat. Best of all? To move your Fishfinder to another location or remove it altogether? Just slide the StarPort lock and lift out! Get up close and personal with the ocean with an easy and reliable fish finder mount for your next nautical adventure!Get ready to explore the depths of the ocean and find your catch of the day! With the versatile Garmin Fishfinder Mount Low Profile and its secure StarPort locking system, you can easily install an ECHOMAP™ UHD, UHD2, and STRIKER™ model to your boat in no time. Find those hidden fish like a pro and go on your next nautical adventure today!UNIVERSAL & VARIABLE - This versatile mount can accommodate an ECHOMAP™ UHD, UHD2, and STRIKER™ model fish finder, making it perfect for any fishing expedition. Compatible with: 4-7” ECHOMAP™ Series 5-7” StrikerTM  Series Garmin Fishfinder Mount Low Profile Overview:INSTALL IN SECONDS - The Garmin Fishfinder Mount Low Profile quickly installs in seconds with RAILBLAZA’s StarPort mounting system - attaching securely to your boat.UNIVERSAL & VARIABLE - This versatile mount can accommodate an ECHOMAP™ UHD, UHD2, and STRIKER™ model fish finder, making it perfect for any fishing expedition.EASY TO MOVE & REMOVE - To move your Fishfinder to another location or remove it altogether? Just slide the StarPort lock and lift out! It's that easy.Features: Installs quickly and easily with RAILBLAZA’s StarPort mounting system Mounts flush to your boat for a low-profile Removable without tools for easy portability Specifications: Weight: 0.20 lbs Material Composition: UV-Stabilized Fiberglass Reinforced Plastic Parts Included: 1 x Garmin Mount 3 x M4 x 1/2” machine screws 3 x M4 Nyloc Nuts Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 8"L WT: 0.15 lbs UPC: 814162021915

Read more less

Kayak 15" Foot Braces - PairPart #: 11940-1Ligthtweight design fits both sit in and sit on top style kayaks. Trigger lock design allow for easy adjustment. Tracks use a universal mounting hole pattern that works in a variety of kayaks.Mounting hardware is not included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Airspan Breeze Life Jacket - XS/SM - PurpleThe minimal design of the Onyx AirSpan Breeze life jacket provides hours of comfort for the paddler, allowing them to move their arms with ease due to the low-profile front foam, sculpted upper back foam, and large armholes.A key feature of this vest is the AirSpan technology located on the vest's back. When the side webbing straps are adjusted to a snug fit, the inner mesh panel expands and an air gap between your back and the foam is formed. This allows for added breathability and airflow to keep you cool when paddling on those warmer weather days on the water. The six adjustment points let you create a customized, secure fit.The AirSpan Breeze has two large pockets with stretchable Airprene panels to store necessary gear and allow for drainage.  The reflective material on the front and back, along with a loop on the back for a light attachment, provide increased visibility. Features: As you tighten the body straps, the inner mesh panel expands, providing airflow to your back and keeping you cooler while paddling and fishing Low profile front foam and sculpted upper back allows full range of motion Thin back foam accommodates most canoe and kayak seats  Shoulder adjustments with airprene comfort pads & shoulder webbing tuck away Two large pockets with stretchable airprene panels accommodate necessary gear and allow drainage Certifications:U.S. Coast Guard approved and Transport Canada approvedTechnical Specifications: Color - Purple Size - XS/SM *Sold as an individual Specifications: Color: Purple Inflatable: No Size: XS/S USCG Approved: Yes Box Dimensions: 3"H x 14"W x 17"L WT: 0.6 lbs UPC: 043311980623

Read more less

MoveVent Curve Paddle Sports Life Vest - M/LThe Onyx MoveVent is a vest that conforms to your body like a glove, yet its innovative vented channels help keep you cool while paddling. The mesh ventilation is featured in the front and back of the MoveVent series jackets to allow for maximum airflow.Features: Soft, lightweight flotation foam Provides excellent mobility for recreational paddle sports (canoe, kayak, SUP) Ventilation in front and back to keep you cool Mesh in lower back fits high back seats and sit-on-top kayaks Sculpted and flexible design conforms to you and stays in place Shoulder adjustments with neoprene comfort pads Adjustable side belts Strong, durable zipper closure Zip assist loop at zipper base Technical Specifications: Chest Size- 36"-44" Weight - 90lbs and over Material - 200 denier nylon ripstop and nylon oxford * U.S. Coast Guard Approved Type III Life Jacket / Personal Flotation Device (PFD) Specifications: Color: Blue Inflatable: No Size: M/L USCG Approved: Yes Box Dimensions: 4"H x 13"W x 18"L WT: 1.2 lbs UPC: 043311056441 Brochure (pdf)

Read more less

72" SAE Power Cable Polarized Electrical ConnectorThis SAE-type polarized electrical connector is a two-prong plug and socket connector set. Features:14-gauge duplex wireSpecifications: Length: 72 in. Volts: 12-24 Max Amps: 20A @ 12V Wire Gauge: 14 AWM Weight: 0.26 lb. Specifications: Type: Cables Box Dimensions: 2"H x 7"W x 8"L WT: 0.2 lbs UPC: 035514432764 Brochure (pdf)

Read more less

144" SAE Power Cable Polarized Electrical ConnectorThis SAE-type polarized electrical connector is a two-prong plug and socket connector set. Features:14-gauge duplex wireSpecifications: Length: 144 in. Volts: 12-24 Max Amps: 20A @ 12V Wire Gauge: 14 AWM Weight: 0.44 lb. Specifications: Type: Cables Box Dimensions: 2"H x 7"W x 8"L WT: 0.4 lbs UPC: 035514432771 Brochure (pdf)

Read more less

Angled Footbrace Upgrade KitThe Angled Footbrace is designed for sit-on-top kayaks or canoes with a raised seat, providing ergonomic and comfortable foot placement. The wider, longer pedal shape is secure and barefoot-friendly. With an adjustment range of 11-½” this can be set to fit almost anyone.This Angled Foot Pedal upgrade option is interchangeable with any of Sea-Dog’s trigger-adjusted recreational footbraces. Features:Proudly designed and constructed in the USA of injection-molded polypropylene and glass-filled nylonWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Built-In All-White Polelight PackThe Navisafe Polelight Pack is the complete solution for small tenders, dinghies, canoes, kayaks or fishing boats with transom or vertical cockpit that require an all-round white Navigation light. The long-life light operates on 4 AA batteriesFeatures: US Coast Guard approved 2 NM Water proof: 10M (33') The Navisafe Polelight Pack is supplied with a neoprene stowaway bag for safe and comfortable storage of units during times of non-use.The Navisafe Polelight Pack Contains: Polelight 360° 2NM 40” 3-piece pole #951 Navimount black vertical mount Neoprene stowaway bag Size (includes neoprene stowaway bag): H = 360 mm, Ø = 80 mm Weight (includes neoprene stowaway bag, without batteries): 560 g Modes / approximate burn time Navilight 360°: White 360° Constant light / 48-56 hrs 4 x AA batteries Twist – On / Off Navisafe Polelight will fit any Navimount and can be converted to fit any Scotty mount and Railblaza mount. Specifications: Lens Color: White LED: Yes Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) Visible Range (Miles): 2nm Housing: Black Box Dimensions: 4"H x 4"W x 17"L WT: 1.4 lbs UPC: 814154018879

Read more less

Universal Fit Kayak Spray SkirtKeep water out of the kayak with this universal-fit spray skirt made with polyurethane-coated 210 denier nylon. Dual-side adjustability and PVC-sealed sealed seams. Features: Universal fit Color: Black Keeps water out Dual side adjustment for customized fit Fits cockpits up to 40" long x 22" wide Included:Mesh bag

Read more less

Big Game 12" SS Gimbal Mount with 241L1-3/4" dia tube x 12" in lengthScotty's Heavy Duty Big Game Stainless Steel Gimbal Mount Rod Holder works in conjunction with flush mount gimbal rod holders. Its made from heavy duty polished 304 stainless steel tubing and comes equipped with our locking #241 mount.Allowing you to fish your rod with any Scotty post mount rod holder quickly and easily at multiple angles. No drilling or mounting required.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Paddle ClipsAttwood's Paddle Clips keep your paddle secure to your boat for freeing up both hands or resting from paddling and fits 1" diameter shafts.Features: Fits paddles 1" diameter Color: Black Set of 2 Comes with stainless steel mounting hardware

Read more less

Airspan Breeze Life Jacket - M/L - PurpleThe minimal design of the Onyx AirSpan Breeze life jacket provides hours of comfort for the paddler, allowing them to move their arms with ease due to the low-profile front foam, sculpted upper back foam, and large armholes.A key feature of this vest is the AirSpan technology located on the vest's back. When the side webbing straps are adjusted to a snug fit, the inner mesh panel expands and an air gap between your back and the foam is formed. This allows for added breathability and airflow to keep you cool when paddling on those warmer weather days on the water. The six adjustment points let you create a customized, secure fit.The AirSpan Breeze has two large pockets with stretchable Airprene panels to store necessary gear and allow for drainage.  The reflective material on the front and back, along with a loop on the back for a light attachment, provide increased visibility. Features: As you tighten the body straps, the inner mesh panel expands, providing airflow to your back and keeping you cooler while paddling and fishing Low profile front foam and sculpted upper back allows full range of motion Thin back foam accommodates most canoe and kayak seats  Shoulder adjustments with airprene comfort pads & shoulder webbing tuck away Two large pockets with stretchable airprene panels accommodate necessary gear and allow drainage Certifications:U.S. Coast Guard approved and Transport Canada approvedTechnical Specifications: Color - Purple Size - M/L *Sold as an individual Specifications: Color: Purple Inflatable: No Size: M/L USCG Approved: Yes Box Dimensions: 4"H x 16"W x 19"L WT: 0.95 lbs UPC: 043311980630

Read more less

Airspan Angler Life Jacket - M/L - GreenA key feature of this vest is the AirSpan technology located on the vest's back.  When the side webbing straps are adjusted to a snug fit, the inner mesh panel expands and an air gap between your back and the foam is formed. This allows for added breathability and airflow to keep you cool on those warmer weather days on the water. The six adjustment points let you create a customized, secure fit.The AirSpan Angler is loaded with pockets to secure your gear: two large zippered pockets, a speed pouch pocket, and a tool holder pocket with buckle closure. The shoulder webbing tuck always allows for reduced snags. The vest features a rod holder and attachment areas to connect and tether tools. The Onyx Air Span Angler life jacket is U.S. Coast Guard and Transport Canada approved. Features: As you tighten the body straps, the inner mesh panel expands, providing airflow to your back and keeping you cooler while paddling and fishing Low profile front foam and sculpted upper back allows full range of motion Thin back foam accommodates most canoe and kayak seats Shoulder adjustments with airprene comfort pads & shoulder webbing tuck away Two large zippered pockets, a speed pouch pocket, and a tool holder with buckle closure Certifications:U.S. Coast Guard approved and Transport Canada approvedTechnical Specifications: Color - Green Size - M/L *Sold as an individual Specifications: Color: Green/Grey Inflatable: No Size: M/L USCG Approved: Yes Box Dimensions: 3"H x 18"W x 18"L WT: 1.45 lbs UPC: 043311980579

Read more less

Clevis/Bimini Support Pair - BlackSick of your bimini cover getting in the way when you’re out on the water? Well, we’ve got the perfect solution for your problem – the RAILBLAZA Clevis Bimini Support Pair! These clever little clevises make it super easy to attach and remove your bimini cover with no fuss. No more struggling to take it on and off or dealing with corroded fittings!The great thing about these clevises is that you can simply click them into any StarPort mount so it couldn’t be easier to use. Plus, they’re perfect for when you’re fishing or taking part in other activities and need a free area around the casting zone. And if there’s stuffy weather but you still want to stay out, just grab your trusty bimini stand and get back in the game!  All you need do is snap it in place and secure it with a few quick turns. Done! Just like that, RAILBLAZA has made having an enjoyable time on the boat that much easier.Not a fan of the hassle that comes with setting up, taking down, and storing a bimini top? We've got the perfect solution for you! Check out our RAILBLAZA Clevis Bimini Support Pair - they make it easy to attach and remove your cover without fuss. Enjoy an unobstructed view of the water no matter what activity you’re taking part in!Clevis/Bimini Support Pair Overview:SAY GOODBYE TO POORLY MADE CLEVIS FITTINGS THAT CORRODE - Our RAILBLAZA Clevis Bimini Support Pair are made from high-quality materials so you'll never have to worry about them breaking or corroding. Plus, they're super easy to attach and remove so you'll never have any trouble using them!SIMPLY CLICK INTO ANY STARPORT MOUNT - These clevises are designed to fit perfectly into any StarPort mount, making them compatible with all of our products. So no matter what RAILBLAZA gear you have, you can easily use your Clevis Bimini Supports!EASILY CONNECT AND DISCONNECT YOUR BIMINI COVER - With these clever little clevises, it's a breeze to connect and disconnect your bimini cover. No more struggling with fittings or fighting against the wind! Simply snap in place and head out on the water!Features: No more struggling with your bimini cover - RAILBLAZA Clevis Bimini Support Pair makes it super easy to attach and remove Click on any StarPort mount for easy use Perfect for fishing or other activities where you need a free area around the casting zone Snap in place and secure with a few quick turns Specifications: Weight: 0.17 lbs  Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included: 2 x Clevis Bimini Supports  Stainless Steel Hardware

Read more less

TracLoader 45 CleatPortLooking for an easy and effective way to keep your fishing rod, mobile phone, drink, navigation light, GoPro camera, or other gear close at hand while on the water? Look no further than the Tracloader 45 CleatPort. This handy little device is perfect for use with gunnel tracks set at a 45-degree angle and can be installed tool-free. It’s ideal for use on Lund boats, Lowe boats, Excel boats, Express boats, and early model Crestliner boats.The Tracloader 45 CleatPort serves two functions in one. First, it acts as a tie-off point for stern lines and bow lines on small craft. Second, it provides a convenient mounting point for any RAILBLAZA accessory. Whether you’re looking to keep your gear within easy reach or add some extra functionality to your boat, the Tracloader 45 CleatPort is a great choice.Keep your gear close and secure on the open water with the Tracloader 45 CleatPort! Not only is this handy device perfect for tying off stern lines and bow lines, but it also allows you to mount any RAILBLAZA accessory without having to use any tools. Get it now and make your fishing trips even more enjoyable!TracLoader 45 CleatPort Overview:EASY ACCESS TO GEAR - Keep your fishing rod, mobile phone, drink, navigation light, GoPro camera, or other gear close at hand while on the water with the Tracloader 45 CleatPort. This handy little device is perfect for use with gunnel tracks set at a 45-degree angle, and can be installed tool-free.CONVENIENT MOUNTING POINT FOR RAILBLAZA ACCESSORIES - The Tracloader 45 CleatPort serves as a mounting point for any RAILBLAZA accessory. Whether you're looking to keep your gear within easy reach or add some extra functionality to your boat, this cleat port has you covered.IDEAL FOR LUND BOATS, LOWE BOATS, EXCEL BOATS, EXPRESS BOATS, AND EARLY MODEL CRESTLINER BOATS - The Tracloader 45 CleatPort is designed for use with small craft that have gunnel tracks set at a 45-degree angle. It's the perfect addition to any Lund boat, Lowe boat, Excel boat, Express boat, or early model Crestliner boat.Features: Easley tied off to a dock  Easy installation; no tools necessary Perfect for Lund Boats, Lowe Boats, Excel Boats, Express Boats, and early model Crestliner boats Adds extra functionality to your boat with the addition of any RAILBLAZA StarPort accessory Specifications: Weight: 0.38 lbs Material Composition:  UV Stabilized Fiberglass Reinforced Plastic Parts Included: 1 x CleatPort StarPort mounted to TracLoader 45 plate. 2 x Stainless Steel T-Bolts with Thumb nuts T-Bolt length 1"/ T-nut 0.14" Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 6"L WT: 0.4 lbs UPC: 814162021069

Read more less

SUPRAX SUP Storage Rack System - Single BoardStand Up Paddle Board Storage SystemYou've invested a lot of money into your beautiful boat. Why would you secure your SUP with ugly bungee cords? And that big board sure does take up valuable deck space. You need a storage system that is as stylish as the rest of your vessel.Features: Secure your board to your boat or your wall 061 Aluminum Alloy, sandblasted anodized Heat press, diecut, EVA protective foam Heavy duty shock cords keep boards in place Fits 7/8" and 1" rails Unique rotating clamp allows for mounting on angled stanchions Single Board System Pack Includes: Two Mounting Racks - Sandblasted anodized 6061 aluminum with diecut EVA protective foam Four Articulating Clamps - Versatile clamp can be mounted to straight or angled rails and stanchions Clamp Inserts - 4 x 1" and 4 x .0875" plastic clamp inserts All mounting hardware and installation tools included WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less